Page 1

Stef de Jong | Industrial Product Design | stefdejong@live.nl | linkedin | instagram


TABLE OF CONTENTS | 002

004 | INTRODUCTION 006 | EDUCATION HIGHER PROFESSIONAL EDUCATION 008 | INTERNSHIP ULAMO ULFT 008 | PROJECTS 010 | SOLIDWORKS COMPUTER AIDED DESIGNING 012 | ILLUSTRATOR 014 | PHOTOSHOP 016 | FURTHER AMBITIONS 018 | CONTENTS


INTRODUCTION | 004

Mature In front of you lies the portfolio of Stef de Jong, A young designer with an affection for innovative and modern products, both interior- as consumer products. With a lot of motivation he shows an innovative and fresh look. Orders are dealt with both hands and a professional approach. Stef is convinced that a person only can function if he or she is completely him- or herself. Also if this means that this person “different” is. This difference is in his opinion interesting, mainly because of growing of new ideas.

In this portfolio a part of his work from the last one and a half year is shown. There can be seen an increase in his abilities who he has developed during his training at Industrial Product Design. One of his biggest goals is to improve his abilities in Computer Programs like Photoshop, Illustrator and Solidworks. He has linked his development to the name “Mature” (méy•cher), with a wink to his love for nature en tranquility.

T he on ly li m it is yo ur ow n im ag io na ti on ..


EDUCATION | 006

HAN University of Applied Sciences Stef started his training Automotive at the HAN University of Applied Sciences in Arnhem after passing his High School. Het started his training at Industrial Product Design after completing his first year at Automotive. He also achieved his propeadeutic at this training. He started his first internshipship in the second year of his training, about which will be told later. After completing his internship, he attended classes tot complete his second year. He is now in the third year, in which he’s going to do a second, deepening internship.

Internship at Ulamo in Ulft For his 6 month internship, Stef chose to do his internship at Ulamo in Ulft. This company is engaged in the design, develop and manufacture of radiator enclosures. In addition, the company engages in powder coating. Stef has worked in the R&D department and is engaged in multiple jobs. His main task was to work out an idea sketch to a final design. His second task was to convert Solid XT Files of parts to Sheet Metal Files in SolidWorks. He also designed a lacquer rack for tiny parts who had to be painted.


INTERNSHIP | 008

Main Task The main task was to develop an idea for a new type of radiator enclosure. This design consisted several series-mounted plates. The end result was a producible concept, and a requirement at the designing process was to make use of the own machinery. A second requirement was to make use of excisting, already-produced parts as much as possible. The final requirement was to produce as sustainable as possible and thus minimize material waste.

Render lakrek op neutrale achtergrond

Side Tasks Beside his Main Task, Stef also worked on several smaller tasks. One of this tasks was to convert Solid XT Files of excisting radiator parts to Sheet Metal Files in Solidworks. In addition, he worked on a design of a lacquer rack for tiny parts who had to be painted. For both tasks he had to make dimensional drawings, because

the parts would actually go into production. For this were high level dimensioned drawings required, as is customary in this business. More images can be seen on the next pages.


INTERNSHIP | 009

side panel

upperside

attachment point

assembly


INTERNSHIP | 010

0 "L" -1

. R1

0 "A" -1

7.1 7 79.2

8.9

5.4

23.4

23.5

) 3x °(

5 (3x)

SECTION B-B R1.4

33

9.5

R0.1

4.5 5.5 8

20°

0° 12 R0.5 A

2.7

0.5

12

4.1 Max.

R0.5

8.7 DETAIL A SCALE 2 : 1

DETAIL 2 SCALE 2 : 1 SCHAAL:

1:2

EENHEID:

mm

MATERIAAL: KLEURCODE:

Bouwhoogte

300

400

500

550

600

700

Lengte "L" Lengte "A"

292.8 243.75

392.8 343.75

492.8 443.75

542.8 493.75

592.9 543.75

692.8 643.75

900

PROJEKTIE:

950

NAAM:

DATUM:

GETEKEND:

SdJ

10-12-2012

GECONTR.:

BtB

10-12-2012

UITGEGEVEN: HtB

10-12-2012

ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN:

- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:

TEK. NR.:

115.00.123-00

Side Panel K3 Links

892.8 942.8 843.75 893.75

- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101

HOEK: ± 0,5°

MAAT: ± 0,5 mm

BENAMING:

1

BLAD:

AFNEMER:

ART. NR.:

-

A3

FORMAAT:

file location T:\Projecten\Projecten 2012\12.035 Caradon_Zijpaneel tekening omzetten naar Ulamo tekeningen\3D\

24.9

3.6

0.6 0.1

SECTION F-F

12.2

B

F

8

11 (3x)

R1.5 (2x)

Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.

3.6

21.8

47.3

45

R1 (6x)

125

34

48.2

7

R1 27°

70.2

12

24

40.1

2.8

B

27°

+0.1 38.6 - 0.3

43.6

39.2 149.3

35.6

x)

0.8

(2

R2 (2x)

DETAIL 2

132.2

3

F

TOLERANCES IN ACCORDANCE WITH DIN 7168

2000 4000 2.0

"B" 8.3

A

7.2

9

6.3

7

"A" "C"

R2.7 (4x)

12

11.8 144.6 11.8

SECTION B-B

4

SCALE 1 : 1 SCHAAL:

1:2

EENHEID:

mm

NAAM:

MATERIAAL: KLEURCODE:

"A"

7.5

9.3

=

R2

3.6

400

500

600

700

800

900

1000

1100

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000

402

502

602

702

802

902

1002

1102

1202

1402

1602

1802

2002

2202

2402

2602

2802

3002

"B"

403.4 503.4 603.4 703.4 803.4 903.4 1003.4 1103.4 1203.4 1403.4 1603.4 1803.4 2003.4 2203.4 2403.4 2603.4 2803.4 3003.4

"C"

385.8 485.8 585.8 685.8 785.8 884.8 984.8 1084.8 1184.8 1384.8 1584.8 1783.8 1983.8 2183.8 2383.8 2583.8 2783.8 2983.8

PROJEKTIE:

DATUM:

GETEKEND:

SdJ

10-12-2012

GECONTR.:

BtB

10-12-2012

UITGEGEVEN: HtB

10-12-2012

ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN: HOEK: ± 0,5°

MAAT: ± 0,5 mm TEK. NR.:

BENAMING:

- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101

- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:

115.00.125-00

Top Grill K3

1

BLAD: AFNEMER:

ART. NR.:

-

A3

FORMAAT:

file location T:\Projecten\Projecten 2012\12.035 Caradon_Zijpaneel tekening omzetten naar Ulamo tekeningen\3D\

5.3 2.1

DETAIL C SCALE 1 : 1

Bouwlengte = "L"

7.5

)

R5

=

=

x)

(2

SECTION A-A

(2x

=

R2

R3.5

24

12.7

.7

R2

0.7

A

6.7

7.2 5

8.2

B

5.3 8.3

7.8

B

3.3

C

7.5

32.5

150

77.2

15

148.6

47.3

R1.5

42.7

3.3

5

R1

=

Epsilon (Tool Adjt)

+0.033

+0.025

+0.020

+0.017

+0.014

-0.113

-0.100

-0.090

-0.082

-0.06

PERFORATED LENGTH "B"

346

446

546

646

746

846

946

1046

1146

1346

795

55 5

73

6 3 1

1318

1192

1080

980

880

480

680

4

1

130

380

580

780

2

23,5

Volledig aflassen (2x)

10

A A 831

Pos 1 2 3 4 5 6

Aantal 2 2 2 18 1 2

SCHAAL:

1:10

EENHEID:

mm

MATERIAAL: KLEURCODE: PROJEKTIE:

SECTION A-A SCALE 1 : 2

DETAIL A SCALE 1 : 2

Benaming Ligger lang Staander lang Staander kort Haak Ligger kort Naadloze precisiebuis NAAM:

DATUM:

GETEKEND:

SdJ

11-12-2012

GECONTR.:

DtH

11-12-2012

UITGEGEVEN: HtB

11-12-2012

BENAMING:

Oprek-haak_Type 1 AFNEMER:

-

Tekening nr. 505.00.24-00 505.00.25-00 505.00.22-00 505.00.26-00 505.00.23-00 505.00.27-00

ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN: HOEK: ± 0,5°

MAAT: ± 0,5 mm TEK. NR.:

- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101

- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:

505.08.00-00

BLAD:

1

ART. NR.: FORMAAT:

A3

file location T:\500\505 Haken Lakstraat\

B

768

12

1000 120 400 0.5 400 1000 0.8 2000 1.2

16.8

30 120 0.3

=

6 30 0.2

12

0.5 6 0.1

Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.

ABOVE UPTO +/-

Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.

NOMINAL SIZE


011 | PROJECTS

Schoolprojecten Stef is on his training quarterly working on a design task. Hereby will be focused on different learning objectives Some of this learning objectives are “Production oriented design”, “target oriented design”, “cost oriented design” and “innovative design”. For the project “Jack in a Box” Stef has developed the learning objective production oriented design. For the project “Child Kart” he has developed the learning objective target oriented design, where is looked at at the wishes of children. At the design of the helping tool for carpet tile positioners he has developed the learning objectives target oriented design and cost oriented design. For the project of the bicycle lamp he has mainly worked on innovative design. All these learning objectives were developed, in addition to the basic learning objectives cooperating and developing. For the project “Jack in a Box” there had to be made a design of the toy on which account has been taken of injection moldability. In this toy there’s a mechanism which gives feedback on the child. This mechanism should be mounted without screws or glue. The toy had to excist only injection moldable parts and the mechanism had to fall into a sort of groove or click system

Afb. X: Render ontworpen kinderspeelgoed

Afb. X: Model van de ontworpen skelter


PROJECTS | 012

Stef also worked on a child kart for little children. Here were the wishes of the target group the most important and account had to be taken of their wishes. To know these wishes, a target group analysis has been done.

Afb. X: Render van het hulpmiddel voor tapijttegelleggers

In his second school year Stef worked on a helping tool for carpet tile positioners. These workers are prone to their backs and for this reason there has to be a solution in the form of a tool. Since the acceptance of the audience is not very high, so account had to be taken of this target group. The cost were very important because it should not exceed the cost of absenteeism. Finally Stef has been working on a new model bike light for an existing bikes line of Dutch largest bicyle company. At this project, it was very important to focus on manufacturability. Because it was a new line of bikes, it was also very important to come out with an innovative design. This had to fit into the style of the bike line.

Afb. X: Render van het ontworpen fietslampje


Stef made ​​his first experiences with SolidWorks on in his training Automotive. At this training there was focused on usage oriented design. For this, he worked a lot with force calculations and tolerances. In his current training Industrial Product Design there is focused on production oriented designing. For this, he looked a lot at material properties and production. The features in SolidWorks that he has developed are the basic modeling features, Sheet Metal, Surface Modelling and force calculations.

Render van buis


SOLIDWORKS | 014

Besides SolidWorks he also has experience in rendering his models in SolidWorks and Keyshot, as seen in some images. He has also worked in the third year of his training with the 3D-program Solid Thinking.

SOLIDTHINKING CAMERA


015 | ILLUSTRATOR

Stef created soms assignments in Illustrator during his training Industrial Product Design. One of the first assignments was to create a simple layout for a washing machine panel. Also making a simple poster was part of the commands. In the third year, he designed an app layout for an electric golf cart, named The Mantys. Here was the intention to design a layout that was both usefull as clearly. In addition to assignments for school, he also designed a baby card, commissioned by prospective parents. This design was thereafter used to print the actual baby card. Finally, he also used Illustrator to design his first portfolio. This portfolio is vieIllustrations and design Š Stef de Jong wable online as full version. Because the

design in Illustrator pleased him so well, he chose to also design his second and improved portfolio in Illustrator. To keep the overview over the pages he has chosen to use InDesign, because he finds that this program is very similar to Illustrator.


ILLUSTRATOR | 016

42:01 71%

Welkom op dit portfolio. U kunt hier informatie vinden, verdeeld onder verschillende onderwerpen welke bovenaan deze pagina te vinden zijn. Allereerst zijn mijn ontwikkelingen als student te lezen, gevolgd door mijn ambitie. Vervolgens staat er onder het kopje “CV” mijn Curriculum Vitae beschreven. Tot slot kunt u lezen op welke manier u in contact kunt komen met mij en nog een paar links betreffende mijn opleidingen en ervaringen.

About me

The only limit, is your own imagination...

Ervaringen met programma’s

Naam: Stef de Jong Leeftijd: 19 jaar

Photoshop

Woonplaats: Duiven Stef de Jong is een beginnend ontwerper met een affectie voor

Illustrator

innovatieve en moderne producten, zowel interieur- als consumentenproducten. Met veel motivatie toont hij een innovatieve

Microsoft Word, Powerpoint & Excel

en vernieuwende blik. Opdrachten worden met beide handen aangepakt en professioneel benaderd. Lees meer Portfolio Stef de Jong

(c) Copyright 2012


PHOTOSHOP | 018

Beside Illustrator Stef made also a few assigments in Photoshop in the first year of his training. One of the first tasks which Stef has worked on in Photoshop was making a cover of any magazine. This is shown in the illustration. In addition, he

has worked on various deepening assignments in his third year, like a Power Tool and radio as shown below. Hereby there has been took a closer look at the features of Photoshop.


FURTHER AMBITIONS | 020

Stef has a clear ambition, namely to develop his skills in his favorite computer programs. With this he hopes to find a suitable position in business consistent with his training, skills and aspects he loves. In the portfolio he made at the beginning of his training Industrial Product Design​​, he says the following about his ambitions: “The ambition who has become increasingly clear in recent years is the ambition of purposefulness. Merely by establishing clear and achievable goals can be take further steps. I find it important that commitment is shown and there won’t be shown inactivity. I find it important that commitment is shown and there won’t be shown inactivity. This creates naturally results, which again leads to motivation. Motivation is also one of the main pillars to achieve goals. By showing what someone does love and passion, someone will get further. Hereby it is very important to be innovative, and accept challenges which are be created by themself. At this being innovative, it is important to see all the aspects who concern the objective, and be receptive to innovations.”


CONTENTS | 022

1

Places

000 | UNDERNEATH THE “EMMAPIRAMIDE” ROZENDAAL, THE NETHERLANDS 001 & 003 | “ROZENDAALSE VELD” ROZENDAAL, THE NETHERLANDS 005 | HOGESCHOOL VAN ARNHEM EN NIJMEGEN ARNHEM, THE NETHERLANDS 007 | ULAMO BV ULFT, THE NETHERLANDS 019 | “ROZENDAALSE VELD” ROZENDAAL, THE NETHERLANDS 021 | BEACH OF FARO ALGARVE, PORTUGAL

2

Objects

008 | RENDERS OF BOTH DESIGNS 009 | PARTS OF THE MAIN DESIGN 010 | SOLIDWORKS PARTS AND DRAWINGS 011 | RENDER “JACK IN A BOX” AND SCALE MODEL OF CHILD KART 012 | RENDER CARPET TILE POSITIONER AND RENDER BICYCLE LAMP 013 | EXAMPLE SURFACE MODELLING AND EXAMPLE RENDERING 014 | EXAMPLE SHEET METAL MODELLING, EXAMPLE FORCE CALCULATION AND EXAMPLE SOLIDTHINKING 015 | WASHING MACHINE PANEL AND BIRTH CARD 016 | MANTYS-APP AND OLD PORTFOLIO 017 | MAGAZINE COVER 018 | POWERTOOL AND RADIO

Mature English  

English version of the portfolio of Stef de Jong

Read more
Read more
Similar to
Popular now
Just for you