Page 1

Laserable and Rotary

Materials Catalogue

www.troteclaser.com

Trotec offers a wide variety of materials to choose from providing unlimited potential for your business.


Catalogue Contents Laser Materials

TroLase

4

TroLase Metallic Plus and TroLase Metallic

TroLase Reverse

8

LaserFlex

10

TroLase Lights

11

TroGlas and Acrylic Sheets

12

TroLase ADA Signage

14

TroLase Thins

16

TroLase Textures

18

TroPly

20

TroPly Metallic Plus and TroPly Metallic

22

TroPly Satins

24

TroPly Ultra

26

TroPly HiGloss

28

TroPly Ultra Reverse

30

TroPly HiGloss Reverse

31

Metals

Accessories

Machines & Services

Laser material Plastic materials with an acrylic core can be worked with the laser. Many metals can also be marked with the laser but cannot be cut.

19

Armor Core

Rotary Materials

6

Anodized Aluminum

32

Aluminum

34

Brass

36

Steel, Nickel, Sublimation Metals

38

DuraBlack™

40

Alumamark™

41

Laser Marking Compounds

42

Laser Rubber

44

Paints for Acrylic

45

Badge Accessories

46

Braille Accessories

49

Tapes, Velcro & Adhesive

50

Cable Tags

53

Trophy Shields & Pet Tags

54

Engraving Cutters

56

Diamond Tools

57

Fabrication Equipment

58

JRS Sign Frames

62

Flat Bed Lasers

66

Galvo Lasers

67

Exhaust Systems & Supplies

68

Cut-to-Size Services

69

Overview Features

70

Exterior use This material is UV-resistant and suitable for outdoor use. Of course, it can also be used for indoor applications.

Reverse engraving This material is engraved from the back using mirrored graphics. Afterwards, the engraving can be inlaid with colour or backlit, so that the engraved image is visible from the front.

Engraving materials This material (usually with ABS core) is suitable for use with mechanical engraving devices.

Indoor use This material is not suitable for long-term, unprotected use in outdoor areas (UV exposure may cause discolouration).

Any colour deviations between the images shown in the Catalogue and actual items are due to electronic depiction or typographical reasons and are not considered mistakes.


Laserable Materials

TroLase TroLase is an UV-resistant acrylic based laminate for both indoor and outdoor applications.

Typical Use

The thin top layer makes detailed engraving possible at high production speeds. Processing creates less residue than with other materials, which reduces the need for cleaning and minimizes processing times.

• Interior Signs • Exterior Signs • Badges • Trophy Plates • Safety Signs

Material features Material: Micro-surfaced impact acrylic, 2 ply / 3 ply Finish: matte non-glare, gloss Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear**

Laser material

Engraving material

Interior use

Exterior use

Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs.

Best Sellers White/Red 1/32“ L206-203 1/16“ L206-206 1/8“ L206-209

White/Sky Blue 1/16“ L205-206

Red/White 1/32“ L602-203 1/16“ L602-206 1/8“ L602-209 1/16“ L602-206G

Blue/White 1/32“ L512-203 1/16“ L512-206 1/8“ L512-209 1/16“ L512-206G

Yellow/Black 1/32“ L704-203 1/16“ L704-206 1/8“ L704-209 1/16“ L704-206G

Bright Green/White 1/32“ L932-203 1/16“ L932-206 1/8“ L932-209

White/Black 1/32“ L204-203 1/16“ L204-206 1/8“ L204-209 1/16“ L204-206G Black/White 1/32“ L402-203 1/16“ L402-206 1/8“ L402-209 1/16“ L402-206G 1/8“ L402-209G Smoke Grey/White 1/16“ L312-206

**Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.

4

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


Laserable Materials

TroLase Burgundy/White 1/16“ L622-206

Sapphire/White 1/32“ L502-203 1/16“ L502-206

Light Blue/White 1/16“ L562-206

Orange/White 1/32“ L612-203 1/16“ L612-206

Navy Blue/White 1/16“ L552-206

Almond/Black 1/16“ L854-206

Yellow/Red 1/16“ L706-206

Purple/White 1/16“ L582-206 1/16“ L582-206G

Matte Black/Silver 1/16“ L413-206

Celadon Green/White 1/16“ L972-206

Pink/White 1/16“ L662-206

Gloss Black/White 1/16“ L422-206

Evergreen/White 1/32“ L912-203 1/16“ L912-206 1/8“ L912-209

Dark Brown/White 1/16“ L842-206

Matte Black/Gold 1/16“ L417-206

White/Black/ White 1/16“ L204-306 1/8“ L204-309 Black/White/ Black 1/16“ L402-306 1/8“ L402-309 Blue/White/ Blue 1/16“ L512-306 1/8“ L512-309

Walnut/White 1/16“ L192-206

Dark Walnut/White 1/16“ L002-206

Gloss Black/Gold 1/16“ L427-206

Navy Blue/Gold 1/16“ L557-206

Red/Black 1/16“ L604-206

Red/Gold 1/16“ L617-206

Pink/Black 1/16“ L664-206

Pine Green/Gold 1/2“ L917-206

Yellow/Black/ Yellow 1/16“ L704-306 1/8“ L704-309

Pine Green/White 1/32“ L912-203 1/16“ L912-206 1/8“ L912-209

Verde Green/Gold 1/16“ L937-206

Medium Brown/White 1/16“ L822-206

Bright Green/White 1/32“ L932-203 1/16“ L932-206 1/8“ L932-209 1/16“ L932-206G

Dark Brown/White 1/16“ L842-206

Light Grey/White 1/16“ L322-206

Red/White/ Red 1/16“ L602-306 1/8“ L602-309

Visit our website: www.troteclaser.com

5


Laserable Materials

TroLase Metallic, Plus and Scratch Resistant (SR) TroLase Metallic is an acrylic based laminate with an authentic metallic finish. The thin surface layer allows detailed engraving at high production speeds. TroLase Metallic Plus features a special surface coating that makes the material UV-resistant and suitable for outdoor use. The SR materials include a clear top coat which adds protection against scratches, scuffing and fingerprints.

Typical Use • Interior Signs • Exterior Signs (Metallic Plus) • Badges • Trophy Plates • Safety Signs

TroLase Metallic Plus Features Material: Modified impact acrylic, 2 ply Finish: brushed metal Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*

Laser material

Engraving material

Interior use

Laser material

Engraving material

Interior use

Exterior use

TroLase Metallic & Metallic SR Features Material: Micro-surfaced impact acrylic, 2 ply Finish: brushed or matte metal Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*

*Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.

6

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroLase Metallic Plus Brushed Bright Nickel/ Black 1/32“ LMT+364-203 1/16“ LMT+364-206 1/8“ LMT+364-209

Brushed Copper/Black 1/32“ LMT+864-203 1/16“ LMT+864-206 1/8“ LMT+864-209

Brushed Stainless Steel/ Blue 1/32“ LMT+315-203 1/16“ LMT+315-206 1/8“ LMT+315-209

Brushed Stainless Steel/Red 1/32“ LMT+316-203 1/16“ LMT+316-206 1/8“ LMT+316-209

Brushed Ant. Gold/Black 1/32“ LMT+764-203 1/16“ LMT+764-206 1/8“ LMT+764-209

Laserable Materials

Brushed Stainless Steel/Black 1/32“ LMT+314-203 1/16“ LMT+314-206 1/8“ LMT+314-209

TroLase Metallic Smooth Gold/Black 1/32“ LMT714-203 1/16“ LMT714-206 1/8“ LMT714-209

Brushed Aluminum/Black 1/32“ LMT354-203 1/16“ LMT354-206 1/8“ LMT354-209

Brushed Copper/Black 1/32“ LMT894-203 1/16“ LMT894-206

Brushed Gold/Black 1/32“ LMT734-203 1/16“ LMT734-206 1/8“ LMT734-209

Brushed Silver/Black 1/32“ LMT334-203 1/16“ LMT334-206 1/8“ LMT334-209

Brushed Deep Bronze/Black 1/16“ LMT884-206

European Gold/Black 1/32“ LMT754-203 1/16“ LMT754-206 1/8“ LMT754-209

Smooth Silver/Black 1/32“ LMT344-203 1/16“ LMT344-206 1/8“ LMT344-209

Chrome/Black 1/16“ LMT324-206

TroLase Metallic SR Brushed Silver/Black 1/16“ 334-229SR

Smooth Silver/Black 1/16“ 344-229SR 1/8“ 344-249SR

Brushed Aluminum/Black 1/32“ 354-219SR 1/16“ 354-229SR 1/8“ 354-249SR

Smooth Gold/Black 1/16“ 714-229SR

Brushed Gold/Black 1/16“ 734-229SR

European Gold/Black 1/16“ 754-229SR

Brushed Copper/Black 1/32“ 894-229SR

Brushed Brass/Black 1/16“ 764-229SR

Visit our website: www.troteclaser.com

7


Laserable Materials

TroLase Reverse TroLase Reverse consists of transparent acrylic with a coloured coating on the back. By mirror engraving the image into the back, the coloured layer is removed during the engraving process and the material becomes transparent in these places. By using acrylic paint to inlay the engraved back, a coloured engraving is created. The smooth surface allows for easy cleaning.

Typical Use • Interior Signs • Exterior Signs • Badges • Safety Signs • Information Signs

Material features Material: Micro-surfaced impact acrylic with back-coating, 2 ply Finish: matte non-glare, gloss Thickness: 1/16”, 1/8” Engraving depth: 0.003” Cutting method: laser, saw

8

Cut-to-size and individual services: see page 69

Laser material

Engraving material

Interior use

Exterior use

Reverse

Not all colour & thickness combinations are stock items, please call for availability


TroLase Reverse Matte Clear/White 1/16“ LR201-206 1/8“ LR201-209

Gloss Clear/Silver 1/16“ LR340-206 1/8“ LR340-209

Matte Clear/Burgundy 1/16“ LR621-206

Matte Clear/Grey 1/16“ LR311-206

Matte Clear/Silver 1/16“ LR341-206 1/8“ LR341-209

Matte Clear/Blue 1/16“ LR511-206

Matte Clear/Ivory 1/16“ LR221-206

Matte Clear/Black 1/16“ LR401-206 1/8“ LR401-209

Matte Clear/Navy Blue 1/16“ LR551-206

Matte/Dark Brown 1/16“ LR841-206

Gloss Clear/Black 1/16“ LR400-206

Matte Clear/China Blue 1/16“ LR381-206

Matte Clear/Yellow 1/16“ LR701-206

Matte Clear/Gold 1/16“ LR711-206

Matte Clear/Sapphire 1/16“ LR561-206

Matte Clear/Parchment 1/16“ LR811-206

Gloss Clear/Gold 1/16“ LR710-206

Matte Clear/Pine Green 1/16“ LR911-206

Matte Clear/Celadon 1/16“ LR971-206

Matte Clear/Aluminum 1/16“ LR351-206

Laserable Materials

Matte Clear/Red 1/16“ LR601-206

Matte Clear/Green 1/16“ LR931-206

Visit our website: www.troteclaser.com

9


Laserable Materials

LaserFlex LaserFlex is a transfer film for customizing textiles. The laser can reproduce even the finest details with intricate designs. Once the artwork has been engraved or cut out on the laser unit, the design is applied to the textiles using a transfer press. LaserFlex is characterized by good opacity and high elasticity.

Typical Use • Customization of T-shirts and fabric bags • Recommended for cotton, polyester, blended fabrics • Less suitable for nylon and coated textiles • Flex on flex is possible for multi colour designs

Material features Material: Polyurethane on transfer paper Surface: matte Thickness: 0.004” Engraving depth: 0.004” Cutting method: laser, shear, scissors Sheet Size: 16.5” x 11.75”

Laser material

Reverse

White

Yellow

Orange

Red

Blue

Navy Blue 0.004“ 623SFR 243

Green

Black

Sample Kit 0.004“ 623SPK 054

0.004“ 623SFR 236

0.004“ 623SFR 239

0.004“ 623SFR 242

0.004“ 623SFR 238

0.004“ 623SFR 240

0.004“ 623SFR 237

0.004“ 623SFR 241

Tips LaserFlex has been specially designed to not only be cut but also to be weeded by laser. This means that it is no longer necessary to mechanically remove excess material between graphics and letters or along edges. Recommended transfer conditions: Temperature: 165 °C Duration: 17 seconds LaserFlex film can be washed at up to 60 °C. Any residues can be removed by washing.

10

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroLase Lights Laserable Materials

TroLase Lights are highly flexible and robust films with adhesive coating on the back, which can be laser engraved. The self-adhesive film adheres perfectly to various materials such as metals, plastic, rubber, and wood and makes it a popular material in industrial and recognition applications.

Typical Use • Exterior & Interior Signs • Badges • Trophy Plates • Vinyl Lettering • Labels / Stickers • Labelling of packages

Material features Material: Micro-surfaced 2 ply plastic, with adhesive Finish: gloss, brushed metal Thickness: 0.004” Engraving depth: 0.001” Cutting method: laser, shear Sheet Size: 12” x 24”

Laser material

Engraving material

Interior use

Exterior use

Smooth Gold/Black 0.004“ LL74-201

Brushed Silver/Black 0.004“ LL63-201

White/Black 0.004“ LL62-201

Brushed Brass/Black 0.004“ LL64-201

Smooth Silver/Black 0.004“ LL73-201

Yellow/Black 0.004“ LL68-201

Brushed Bronze/Black 0.004“ LL69-201

Black/Silver 0.004“ LL75-201

Red/White 0.004“ LL60-201

Brushed Copper/Black 0.004“ LL89-201

Visit our website: www.troteclaser.com

Black/Gold 0.004“ LL65-201

Black/White 0.004“ LL61-201

11


Laserable Materials

TroGlas and Acrylic Sheets TroGlas is a transparent, extruded acrylic with a coloured coating on the back. By mirror engraving the back and inlaying the engraved areas with colour, an elegant finish is created. Light effects can be achieved with lighting. Cast acrylic is suitable for applications with both rotary and laser engraving. The clear provides excellent transparency, and all colours laser engrave white and cut with a gloss edge.

Typical Use • Interior Signs • Exterior Signs • Badges • Safety Signs • Display Identification

TroGlas Features Material: Micro-surfaced impact acrylic with back-coating, 2 ply Finish: gloss Thickness: 1/8” / 3/16” / 1/4” Engraving depth: 0.003” Cutting method: laser, saw

Laser material

Engraving material

Interior use

Exterior use

Reverse

Laser material

Engraving material

Interior use

Exterior use

Reverse

Acrylic Sheets Features Material: Cast acrylic, 1 ply Finish: gloss, matte, textured Thickness: 1/8” / 3/16” / 1/4” Cutting method: laser, saw

12

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroGlas Gloss/Red 1/8“ TG4-600 3/16“ TG5-600

Gloss/Blue 1/8“ TG4-500 3/16“ TG5-500

Gloss/Green 1/8“ TG4-931 3/16“ TG5-931

Gloss/Black 1/8“ TG4-400 3/16“ TG5-400

Gloss/Silver 1/8“ TG4-330 3/16“ TG5-330

Laserable Materials

Gloss/White 1/8“ TG4-200 3/16“ TG5-200

Gloss/Gold 1/8“ TG4-710 3/16“ TG5-710

Acrylic Sheets Clear

Clear 1/8“

624CL0118

3/16“ 624CL0177

624F10235705

Textured Clear 1/8“ 623AUS 158

White 1/8“

Mirrored Bronze 1/8“ 623AUS 110

Mirrored Blue 1/8“ 623AUS 111

Flourescent Yellow 1/8“ 623AUS 161

Mirrored Pink 1/8“ 623AUS 114

Mirrored Gold 1/8“ 623AUS 120

Mirrored Silver 1/8“ 623AUS 106

Mirrored Red 1/8“ 623AUS 156

Blue Marble 1/8“ 623AUS 107

Speckled Black 1/8“ 623AUS 196

Visit our website: www.troteclaser.com

Mirrored Orange 1/8“ 623AUS 120

Clear 1/4“

624CL0236

Flourescent Green 1/8“ 623AUS 105

Flourescent Blue 1/8“ 623AUS 162

Flourescent Red 1/8“ 623AUS 160

Mirrored Purple 1/8“ 623AUS 157

Clear/Black Cast 1/8“ 623AUS 164

Mirrored Green 1/8“ 623AUS 155

Red Marble 1/8“ 623AUS 109

Mirrored Black 1/8“ 623AUS 122

Speckled Rose 1/8“ 623AUS 192

Green Marble 1/8“ 623AUS 108

All sheets stocked as 12“ x 24“ (approximate). 24“ x 24“ and 24“ x 48“ available on request.

13


Laserable Materials

TroLase ADA Signage TroLase ADA Signage is a single-layer, dyed, acrylic based material. It is ideal for functional signage in indoor and outdoor areas, for cutting out letters or for creating 3-dimensional signs by mounting cut-out shapes on a base plate. In addition, it is an ideal material for signs featuring Braille.

Typical Use • Exterior & Interior Signs • ADA Compliant • 3-dimensonal Signs • Model making • Letters & Symbols

Material features Material: Single-ply modified acrylic Surface: matte Thickness: 1/32” / 1/16” / 1/8” Cutting method: laser, saw, shear, rotary engraver

Laser material

Engraving material

Interior use

Exterior use

For Braille Accessories see page 49

14

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroLase ADA Signage Red

Blue

1/32“ LS601-103 1/16“ LS601-106 1/8“ LS601-109

Black 1/32“ 1/16“ 1/8“ 1/32“

LS401-103 LS401-106 LS401-109 LS401-103ADH

1/32“ LS501-103 1/16“ LS501-106 1/8“ LS501-109

Marine Blue 1/16“ LS502-106

Burgundy 1/32“ LS602-103 1/16“ LS602-106 1/8“ LS602-109

Light Grey 1/32“ LS305-103 1/16“ LS305-106

Yellow

Charcoal Grey 1/32“ LS307-103 1/16“ LS307-106 1/8“ LS307-109

1/32“ LS701-103 1/16“ LS701-106

Green 1/32“ LS901-103 1/16“ LS901-106

Laserable Materials

Best Sellers Bright White 1/32“ LS204-103 1/16“ LS204-106 1/8“ LS204-109

White

1/32“ LS201-103 1/16“ LS201-106

Silver 1/32“ LS304-103

Clear 1/32“ LS101-103 1/16“ LS101-106 1/8“ LS101-109

Dark Brown 1/32“ LS803-103 1/16“ LS803-106

Tips Order TroLase ADA Signage with self-adhesive film applied to the back. This allows you to easily mount letters cut-out from the material plate on base plates or walls. During assembly use the cut material plate as a template for spacing and as a line level. A few tips for best results: - Materials must be even and without bends or distortions. - A cutting grate should always be used when cutting plastics, in order to lift the material. - Remove the protective film, in order to prevent discolouration or excessive smoke. - If excess smoke results, then too much energy is being used. In this case increase the speed.

Visit our website: www.troteclaser.com

15


Laserable Materials

TroLase Thins TroLase Thins are thinner and more flexible than traditional engraving materials. As a result, it is particularly suited to applications on curved surfaces. The thin surface coating allows detailed engraving at high production speeds. The acrylic based material is available in matte colours as well as shiny and brushed metal finishes.

Typical Use • Interior Signs • Badges • Trophy Plates • Safety Signs • Bottle Labels • Business Cards

Material features Material: Micro-surfaced 2 ply plastic, with or without adhesive Finish: matte non-glare, gloss, brushed metal Thickness: 0.02” Engraving depth: 0.003” Cutting method: laser, saw, shear

Laser material

Engraving material

Interior use

This material is very often used with a magnetic film applied to the back. To see more information about magnetic films, please turn to page 50.

16

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroLase Thins Brushed Gold/Black 0.02“ LT734-202

Brushed Aluminum/Black 0.02“ LT354-202

White/Black 0.02“ LT204-202

Europ. Brushed Gold/ Black 0.02“ LT754-202

Brushed Copper/Black 0.02“ LT894-202

Black/White 0.02“ LT402-202

Trophy Gold/ Black 0.02“ LT794-202

Brushed Silver/Black 0.02“ LT334-202

Yellow/Black 0.02“ LT744-202

Brushed Bronze/Black 0.02“ LT874-202

Trophy Silver/ Black 0.02“ LT394-202

Red/White 0.02“ LT602-202

Smooth Gold/Black 0.02“ LT714-202

Smooth Silver/Black 0.02“ LT344-202

Blue/White 0.02“ LT512-202

Deep Bronze/ Black 0.02“ LT884-202

Gloss Black/ Silver 0.02“ LT423-202

Purple/White 0.02“ LT582-202

Gloss Black/ Gold 0.02“ LT427-202

Matte Black/Silver 0.02“ LT413-202

Verde/Gold 0.02“ LT937-202

Matte Black/Gold 0.02“ LT417-202

Celestial Blue./Gold 0.02“ LT577-202

Port Wine/Gold 0.02“ LT677-202

Black single ply 0.02“ LT404-102

White single ply 0.02“ LT202-102

Laserable Materials

Best Sellers

Add “-ADH“ to part number when ordering for adhesive backing.

Visit our website: www.troteclaser.com

17


Laserable Materials

TroLase Textures TroLase Textures are two-layer acrylic based materials, suitable for applications in demanding environments, where extra durability and scratch resistance are required. The textured, matte surface is non-reflective, durable and easy to clean. TroLase Textures are UV- and weather-resistant, suitable for indoor and outdoor use.

Typical Use • Exterior & Interior Signs • Badges • Safety Signs • Control Panels • Industrial Applications

Material features Material: Co-extruded impact acrylic 2 ply Finish: textured matte Thickness: 1/16” / 1/8” Engraving depth: 0.005”, 0.007” Red and Yellow Cutting method: laser, saw, shear

18

Laser material

Engraving material

Interior use

Outdoor Weatherable

Red/White 1/16“ LTX642-206 1/8“ LTX642-209

Royal Blue/White 1/16“ LTX592-206 1/8“ LTS592-209

Black/White 1/16“ LTX422-206 1/8“ LTX422-209

White/Red 1/16“ LTX246-206

Winter White/Blue 1/16“ LTX205-206 1/8“ LTX205-209

Winter White/Black 1/16“ LTX244-206 1/8“ LTX244-209

Ruby/White 1/16“ LTX622-206

Sapphire/White 1/16“ LTX503-206

Ash Grey/Black 1/16“ LTX374-206

Coffee Bean/White 1/16“ LTX892-206

Teal/White 1/16“ LTX992-206

Ash Grey/White 1/16“ LTX302-206

Tangerine/White 1/16“ LTX652-206

Green/White 1/16“ LTX962-206

Desert Sand/Black 1/16“ LTX854-206

Tan/Dark Brown 1/16“ LTX258-206

Yellow/Black 1/16“ LTX774-206

Yellow/Dark Brown 1/16“ LTX778-206

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


ArmorCore Laserable Materials

ArmorCore is a laserable plastic that combines the ease of use of TroLase with the UV stability and durability of an acrylic cap. The satin finish also allows laser users to reproduce old signs created with traditional non-laserable satin plastic.

Typical Use • Exterior & Interior Signs • Badges • Safety Signs • Control Panels • Industrial Applications

Material features Material: Impact acrylic 2 ply Finish: matte or brushed Thickness: 1/16” Engraving depth: 0.005” Cutting method: laser, saw, shear

Laser material

Engraving material

Interior use

Outdoor Weatherable

White/Red 1/16“ 206-227M 1/16“ 206-227S

White/Blue 1/16“ 205-227M 1/16“ 205-227S

White/Black 1/16“ 204-227M 1/16“ 204-227S

Red/White 1/16“ 602-227M 1/16“ 602-227S

Blue/White 1/16“ 512-227M 1/16“ 512-227S

Black/White 1/16“ 402-227M 1/16“ 402-227S

Yellow/Black 1/16“ 704-227M 1/16“ 704-227S

Orange/Black 1/16“ 614-227M

Grey/White 1/16“ 312-227M

Pine Green/White 1/16“ 912-227M

Visit our website: www.troteclaser.com

Green/White 1/16“ 932-227M 1/16“ 932-227S

19


TroPly Typical Use • Interior Signs • Badges • Trophy Plates • Safety Signs • Information Signs

Rotary Materials

TroPly features a thin surface coating, which allows for intricate details and fast engraving without shading effects. The reflection-free surface allows clear and easy-to-read designs to be created of the very smallest engraved images.

Material features Material: ABS, 2 ply Surface: matte Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits

Engraving material

Interior use

Best Sellers White/Red 1/16“ P206-206

Yellow/Black 1/32“ P744-203 1/16“ P744-206 1/8“ P744-209

White/Black 1/32“ P204-203 1/16“ P204-206 1/8“ P204-209

Red/White 1/32“ P602-203 1/16“ P602-206 1/8“ P602-209

Blue/White 1/32“ P512-203 1/16“ P512-206 1/8“ P512-209

Black/White 1/32“ P402-203 1/16“ P402-206 1/8“ P402-209

Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs.

20

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroPly Red/Bright White 1/32“ P642-203 1/16“ P642-206

White/Green 1/16“ P209-206

Burgundy/White 1/32“ P622-203 1/16“ P622-206 1/8“ P622-209

Sapphire/White 1/16“ P502-206 1/8“ P502-207

White/Pine Green 1/16“ P269-206

Orange/White 1/32“ P612-203 1/16“ P612-206

Blue/Bright White 1/32“ P572-203 1/16“ P572-206

White/Blue 1/16“ P205-206 1/8“ P205-209

Yellow/Red 1/16“ P706-206

Navy Blue/White 1/16“ P552-206

Ivory/Dark Brown 1/32“ P228-203 1/16“ P228-206

Purple/White 1/32“ P582-203 1/16“ P582-206

Bright Green/White 1/32“ P932-203 1/16“ P932-206 1/8“ P932-209

Almond/Black 1/32“ P854-203 1/16“ P854-206 1/8“ P854-209

Walnut/Bright White 1/16“ P172-206

Pine Green/White 1/32“ P912-203 1/16“ P912-206 1/8“ P912-209

Smoke Grey/White 1/32“ P312-203 1/16“ P312-206 1/8“ P312-209

Celadon Green/White 1/16“ P972-206

Light Grey/White 1/16“ P322-206

Dark Walnut/White 1/16“ P002-206

Medium Brown/White 1/32“ P822-203 1/16“ P822-206

Light Grey/Black 1/32“ P324-203 1/16“ P324-206

Red/White/Red 1/8“ P602-309

Dark Brown/White 1/16“ P842-206

Black/White/Black 1/8“ P402-309

Pink/White 1/16“ P662-206

Light Grey/Blue 1/16“ P325-206

Yellow/Black/Yellow 1/8“ P774-306

Pink/Black 1/16“ P664-206

White/Black/White 1/8“ P204-309

Engl. Walnut/ Bright White 1/16“ P192-206

Rotary Materials

Light Blue/White 1/16“ P562-206

Blue/White/Blue 1/8“ P512-309

Black/Bright White 1/32“ P412-203 1/16“ P412-206

Visit our website: www.troteclaser.com

21


TroPly Metallic Plus and TroPly Metallic Typical Use • Interior Signs • Badges • Trophy Plates • Safety Signs • Information Signs

Rotary Materials

TroPly Metallic is characterized by a precious metal look and is ideal for the finest details with clear contrast as well as fast and cost-efficient processing. TroPly Metallic Plus features a special protective layer, which is particularly resistant to scratches and wear.

TroPly Metallic Plus Features Material: ABS, 2 ply Finish: brushed or matte metal Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits

Engraving material

Interior use

Engraving material

Interior use

TroPly Metallic Features Material: ABS, 2 ply Finish: brushed or matte metal Thickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits

22

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroPly Metallic Plus Brushed Silver/Black 1/16“ PMT+334-206

Deep Bronze/Black 1/16“ PMT+884-206

European Gold/Black 1/16“ PMT+754-206 1/8“ PMT+754-209

Smooth Silver/Black 1/16“ PMT344-206 1/8“ PMT344-209

Brushed Copper/Black 1/16“ PMT+894-206

Smooth Gold/Black 1/16“ PMT+714-206 1/8“ PMT+714-209

Brushed Aluminum/Black 1/16“ PMT+354-206 1/8“ PMT+354-209

Brushed Brass/Black 1/16“ PMT+764-206

Brushed Aluminum/Blue 1/16“ PMT+355-206

Brushed Bronze/White 1/16“ PMT+872-206

TroPly Metallic Brushed Gold/Black 1/32“ PMT734-203 1/16“ PMT734-206 1/8“ PMT734-209

Brushed Silver/Black 1/32“ PMT334-203 1/16“ PMT334-206 1/8“ PMT334-209

Deep Bronze/ Black 1/16“ PMT884-206

European Gold/Black 1/32“ PMT754-203 1/16“ PMT754-206

Silver/Black 1/32“ PMT344-203 1/16“ PMT344-206 1/8“ PMT344-209

Brushed Copper/Black 1/32“ PMT894-203 1/16“ PMT894-206

Smooth Gold/Black 1/32“ PMT714-203 1/16“ PMT714-206 1/8“ PMT714-209

Brushed Aluminum/Black 1/32“ PMT354-203 1/16“ PMT354-206 1/8“ PMT354-209

Brushed Gold/Blue 1/16“ PMT725-206

Brushed Silver/Blue 1/16“ PMT325-206

Brushed Bronze/White 1/16“ PMT872-206

Smooth Silver/Black 1/32“ PMT+344-203 1/16“ PMT+344-206

Visit our website: www.troteclaser.com

23

Rotary Materials

Brushed Gold/Black 1/16“ PMT+734-206 1/8“ PMT+734-209


TroPly Satins Typical Use • Interior Signs • Badges • Safety Signs • Information Signs

Rotary Materials

TroPly Satins are available in a large range of colours, in a brushed gloss finish. The solid top layer provides increased protection against scratches or abrasion. Specially designed for indoor use, where a warm appearance in combination with durability and resistance is required.

Material features Material: Acrylic cap / ABS core, 2 ply Finish: brushed gloss Thickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.012“ Cutting method: saw, cutting bits, shear

Engraving material

Interior use

Selected colours are also available in a 3-ply finish. Here, in addition to the surface and core layers there is an extra layer in the colour and thickness of the surface layer applied on the back.

24

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroPly Satins Best Sellers Polar White/Black 1/16“ PS234-206 1/8“ PS234-209

Sapphire/White 1/16“ PS512-206

Yellow/Black 1/16“ PS704-206

White/Black 1/32“ PS204-203 1/16“ PS204-206

Black/White 1/16“ PS402-206

White/Red 1/16“ PS206-206

Airforce Blue/White 1/16“ PS532-206

White/Blue 1/16“ PS205-206

Red/Black 1/16“ PS604-206

Purple/White 1/16“ PS582-206

Grey/White 1/16“ PS302-206

Orange/White 1/16“ PS612-206

White/Green 1/16“ PS209-206

Orange/Black 1/16“ PS614-206

Green/White 1/16“ PS932-206

Burgundy/White 1/16“ PS622-206

White/Red/White 1/8“ PS206-309

White/Black/White 1/16“ PS234-306 1/8“ PS234-309

White/Blue/White 1/8“ PS205-309

Red/White/Red 1/8“ PS602-309

Black/White/Black 1/8“ PS402-309

Blue/White/Blue 1/8“ PS512-309

Burgundy/White/ Burgundy 1/8“ PS622-309

Yellow/Black/Yellow 1/8“ PS704-309

Green/White/Green 1/8“ PS932-309

Visit our website: www.troteclaser.com

Rotary Materials

Red/White 1/16“ PS602-206

Grey/Black 1/16“ PS304-206

25


TroPly Ultra Typical Use • Exterior & Interior Signs • Badges • Safety Signs • Control Panels • Braille Signage

Rotary Materials

TroPly Ultra is an UV stable laminate for indoor and outdoor applications in a matte, reflection-free finish. The deeper top layer provides increased protection against damage and makes TroPly Ultra the preferred material for use in harsh environments. TroPly Ultra can also be cut with a laser.

Material features Material: Laminated impact acrylic, 2 ply Surface: matte Thickness: 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear

26

Cut-to-size and individual services: see page 69

Engraving material

Interior use

Exterior use

Not all colour & thickness combinations are stock items, please call for availability


TroPly Ultra Best Sellers White/Red 1/16“ PU206-206 1/8“ PU206-209

Red/White 1/16“ PU602-206 1/8“ PU602-209

Yellow/Black 1/16“ PU704-206 1/8“ PU704-209

Blue/White 1/16“ PU512-206 1/8“ PU512-209

White/Black 1/16“ PU204-206 1/8“ PU204-209

Black/White 1/16“ PU402-206 1/8“ PU402-209

Sapphire/White 1/16“ PU562-206

Vintage Gold/Black 1/16“ PU774-206

Bright Green/White 1/16“ PU932-206 1/8“ PU932-209

Safety Yellow/ Black 1/16“ PU794-206 1/8“ PU794-209

Vintage Silver/Black 1/16“ PU384-206 1/8“ PU384-209

Hunter Green/White 1/16“ PU992-206

Visit our website: www.troteclaser.com

White/Blue 1/16“ PU205-206 1/8“ PU205-209

Rotary Materials

Ruby/White 1/16“ PU632-206

Black/Gold 1/16“ PU417-206

27


TroPly HiGloss Typical Use • Exterior & Interior Signs • Badges • Safety Signs • Information Signs • Braille Signage

Rotary Materials

TroPly HiGloss is an UV-resistant laminate with a high-gloss surface suitable for indoor and outdoor use. A thick top layer provides extra protection and resistance to scratches and abrasion. The material consists of modified acrylic and is therefore suitable for laser cutting. Due to the thickness of the top layer, signs should be created with mechanical engraving devices for best results.

Material features Material: Laminated impact acrylic, 2- / 3 ply Finish: gloss Thickness: 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear

Engraving material

Interior use

Exterior use

Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs.

28

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroPly HiGloss Best Sellers White/Black 1/16“ PH204-206 1/8“ PH204-209

Vintage Gold/ Black 1/16“ PH774-206 1/8“ PH774-209

Safety Yellow/Black 1/16“ PH794-206 1/8“ PH794-209

Black/White 1/16“ PH402-206 1/8“ PH402-209

Vintage-Silver/ Black 1/16“ PH384-206 1/8“ PH384-209

Ruby/White 1/16“ PH632-206

Blue/White 1/16“ PH512-206 1/8“ PH512-209

Black/Gold 1/16“ PH417-206

White/Red 1/16“ PH206-206 1/8“ PH206-209

Sapphire/White 1/16“ PH562-206

Green/White 1/16“ PH932-206 1/8“ PH932-209

Yellow/Black 1/16“ PH704-206 1/8“ PH704-209

Blueberry Blue/White 1/16“ PH542-206

Teal Green/White 1/16“ PH962-206

Ivory/Dark Brown 1/16“ PH228-206

White/Blue 1/16“ PH205-206 1/8“ PH205-209

Red/White/ Red 1/16“ PH602-306 1/8“ PH602-309

White/Black/ White 1/16“ PH204-306 1/8“ PH204-309

Blue/White/ Blue 1/16“ PH512-306

White/Red/ White 1/8“ PH206-309

Black/White/ Black 1/8“ PH402-309

Green/White/ Green 1/16“ PH932-306

Visit our website: www.troteclaser.com

Rotary Materials

Red/White 1/16“ PH602-206 1/8“ PH602-209

29


TroPly Ultra Reverse Typical Use • Exterior & Interior Signs • Badges • Safety Signs • Information Signs • Braille Signage

Rotary Materials

TroPly Ultra Reverse consists of transparent acrylic with a coating on the back. A transparent image is created by engraving the coloured back. This engraving can then be filled with colours. The protective transparent acrylic in combination with the relatively deep coloured layer on the back makes TroPly Ultra resistant to adverse external influences and easy to clean.

Material features Material: Laminated impact acrylic, 1- / 2 ply Surface: matte Thickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear

Clear single ply 1/32“ PUR101-103 1/16“ PUR101-106 1/8“ PUR101-109

30

Engraving material

Interior use

Exterior use

Reverse

Matte/Sapphire 1/16“ PUR561-206

Matte/Black 1/16“ PUR401-206 1/8“ PUR401-209

Matte/White 1/16“ PUR201-206 1/8“ PUR201-209

Matte/Blueberry Blue 1/16“ PUR541-206

Matte/Red 1/16“ PUR601-206

Matte/Ivory 1/16“ PUR231-206

Matte/China Blue 1/16“ PUR381-206

Matte/Burgundy 1/16“ PUR631-206

Matte/Vintage Silver 1/16“ PUR371-206 1/8“ PUR371-209

Matte/Green 1/16“ PUR911-206

Matte/Yellow 1/16“ PUR701-206

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


TroPly HiGloss Reverse TroPly HiGloss Reverse is polished to a high gloss finish and can be marked on the back, thus creating high-quality signage products. The material is UV stable and weather-proof and therefore suitable for indoor and outdoor use. A 3D effect can be achieved by using an appropriate milling cutter. The material is ideal for backlighting.

Typical Use • Interior Signs • Exterior Signs • Information Signs • Badges • Signs with advertising impact

Rotary Materials

Material features Material: Acrylic, 1- / 2 ply Finish: gloss Thickness: 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear

Engraving material

Interior use

Exterior use

Reverse

Clear/Red 1/16“ PHR600-206 1/8“ PHR600-209

Clear/Blue 1/16“ PHR510-206 1/8“ PHR510-209

Clear/White 1/16“ PHR200-206 1/8“ PHR200-209

Clear/Burgundy 1/8“ PHR630-209

Clear/Sapphire 1/8“ PHR560-209

Clear/Ivory 1/8“ PHR230-209

Clear/Yellow 1/16“ PHR700-206 1/8“ PHR700-209

Clear/Blueberry Blue 1/16“ PHR540-206 1/8“ PHR540-209

Clear/Silver 1/8“ PHR370-209

Clear/Green 1/16“ PHR900-206 1/8“ PHR900-209

Clear/ Teal Green 1/8“ PHR910-209

Clear/Black 1/16“ PHR400-206 1/8“ PHR400-209

Clear single ply 1/16“ PHR100-106 1/8“ PHR100-109

Visit our website: www.troteclaser.com

31


Anodized Aluminum Anodized or colour anodized aluminum is suitable both for engraving with a CO2 laser and with mechanical engraving devices. The protective anodized coating remains intact during laser processing. The image contrast is caused by the removal of the coloured coating and almost photographic qualities can be achieved. A detailed, white engraved image is created.

Typical Use • Interior Signs • Type Plates • Serial Numbers • Barcodes • Signs with advertising impact

Anodized Aluminum features

Metals

Material: Anodized Aluminum, colour coating over silver aluminum Finish: matte, gloss Thickness: 0.02” / 0.025” / 0.04” / 0.125” Cutting method: saw, cutting bits, shear

32

Cut-to-size and individual services: see page 69

Laser material

Engraving material

Interior use

Not all colour & thickness combinations are stock items, please call for availability


Anodized Aluminum Stock size 12”x 24” sheets, 24” x 48” available by special order

Satin Silver 0.025“ 9722029-1 0.04“ 9722629-1 0.125“ 9729090-1 0.05“ 9729029-1

Satin Black 0.025“ 9722033-1 0.04“ 9722633-1

Satin Blue 0.02“ 9722030-1

Bright Silver 0.02“ 9722022-1

Bright Gold 0.02“ 9722021-1

Satin Red 0.02“ 9722032-1

Satin Gold 0.02“ 9722028-1 0.04“ 9722628-1

Metals

Visit our website: www.troteclaser.com

33


Aluminum Aluminum sheets allow for engraving to a bright silver finish. It is lightweight and easy to cut, providing an economical solution for industrial and awards applications.

Typical Use • Interior Signs • Trophy and Plague Plates • Machinery ID • Memorial Plates

Laserable Aluminum Features

Metals

Material: Aluminum, colour coating over silver, black, white or gold aluminum Finish: matte, gloss Thickness: 0.02” / 0.025” Cutting method: saw, cutting bits, shear

Laser material

Engraving material

Interior use

Exterior use

Aluminum Features Material: Aluminum, colour coating over silver aluminum Finish: matte, gloss, brushed Thickness: 0.02” / 0.025” Cutting method: saw, cutting bits, shear

34

Cut-to-size and individual services: see page 69

Engraving material

Interior use

Exterior use

Not all colour & thickness combinations are stock items, please call for availability


Laserable Aluminum 12” x 24” sheets, 24” x 48” available by special order

Silver Metallic Black/Silver 0.02“ 1059-1

Black/White 0.02“ 1433-1

Matte Gold/Black 0.02“ 1428-1

Matte Silver/Black 0.02“ 1429-1

White/Black 0.02“ 1434-1

Gloss Black/Gold 0.02“ 1095-1

Black/Silver 0.02“ 1097-1

Bright Red/Silver 0.025“ LASER RED ALU

Dark Green/Silver 0.025“ LASER GRN ALU

Bright Blue/Silver 0.025“ LASER BLU ALU

Purple/Silver 0.025“ LASER PPL ALU

Aluminum

12” x 24” sheets, 24” x 48” available by special order Satin Blue/Silver 0.025“ 3030-1

Bright Gold/Silver 0.02“ 1021-1

Bright Silver/Silver 0.02“ 1022-1

Bright Red/Silver 0.025“ 3026-1

Opaque Brown/Silver 0.025“ 3037-1

Satin Copper/Silver 0.025“ 3038-1

Dark Green/Silver 0.025“ 3039-1

Satin Green/Silver 0.025“ 3031-1

Opaque Maroon/Silver 0.025“ 3035-1

Opaque Yellow/Silver 0.025“ 3044-1

Opaque White/Silver 0.025“ 3034-1

Matte Black/Silver 0.025“ 3041-1

Opaque Orange/Silver 0.025“ 3036-1

Opaque Red/Silver 0.02“ 3043-1

Bright Purple/Silver 0.025“ 3023-1

Royal Blue/Silver 0.025“ 3040-1

Satin Gold/Silver 0.02“ 1028-1

Satin Silver/Silver 0.02“ 1029-1

Satin Silver Double Sided 0.04“ 5029-1

Satin Violet/Silver 0.025“ 3027-1

Gloss Black/Silver 0.025“ 3033-1

Visit our website: www.troteclaser.com

Black/Silver Exterior 0.04“ 5095-1

35

Metals

Gloss Black/Silver 0.02“ 1033-1


Brass Brass is a premium material that results in a lustrous gold finish when engraved. Made from a combination of copper and zinc, it can be oxidized to produce black text. Premium Leaded Brass has a small amount of lead and a much higher copper to zinc ratio which makes it easier to engrave and oxidize to a truer black.

Typical Use • Exterior & Interior Signs • Type Plates • Serial Numbers • Barcodes • Signs with advertising impact

Brass Features

Metals

Material: Clear or coloured lacquer coating over gold brass Finish: matte, gloss, brushed Thickness: 0.02” / 0.025” Cutting method: saw, cutting bits, shear

Engraving material

Interior use

Laser material

Engraving material

Laserable Brass Features Material: Coloured lacquer coating over gold brass Finish: gloss Thickness: 0.016” Cutting method: saw, cutting bits, shear

Interior use

Premium Engraver’s Leaded Brass Features Material: Clear lacquer or metallic plating over brass Finish: satin, gloss Thickness: 0.02” / 0.025” / 0.125” / 0.04” / 0.062” Cutting method: saw, cutting bits, shear

36

Cut-to-size and individual services: see page 69

Engraving material

Interior use

Not all colour & thickness combinations are stock items, please call for availability


Laserable Brass

12” x 24” sheets, 24” x 48” available by special order

Gloss Black/Brass 0.016“ 6013-1

Classic Marble Red/Brass 0.016“ 5335-1

Classic Marble Grey/Brass 0.016“ 5342-1

Classic Marble Green/Brass 0.016“ 5322-1

Classic Marble Blue/Brass 0.016“ 5323-1

Brass

12” x 24” sheets, 24” x 48” available by special order Blue/Gold 0.025“ BLUE BRASS

Bright Gold/Gold 0.02“ 8011-1

Bright Red/Gold 0.02“ BRIGHT RED BRS

Brown/Gold 0.025“ BROWN BRASS

Satin Gold/Gold 0.025“ 8012-1

Dark Green/Gold 0.025“ GREEN BRASS

Maroon/Gold 0.025“ MAROON BRASS

Matte Black/Gold 0.025“ MATTE BLK BRS

Opaque Red/Gold 0.025“ RED BRASS

Purple/Brass 0.025“ PURPLE BRASS

Royal Blue/Gold 0.025“ ROY BLU BRASS

Satin Gold DoubleSided Brass 0.025“ 8050-1

White/Gold 0.025“ WHITE BRASS

Premium Engraver’s Leaded Brass 12” x 24” sheets, 24” x 48” available by special order Satin Yellow 0.02“ 8020-1

Satin Yellow 0.025“ STN LEAD BRAS

Satin Yellow 0.125“ 9081-1

Satin Yellow 0.04“ 9110-1

Satin Yellow 0.062“ 9030-1

Bright Yellow 0.04“ 9120-1

Satin Silver/Gold 0.02“ STN SIL BRASS

Satin Copper/Gold 0.02“ SATIN COPPER

Visit our website: www.troteclaser.com

37

Metals

Gloss Black/Gold 0.02“ 8013-1


Steel, Nickel and Sublimation Metals Brass coated steel offers the finished look of brass at an economical price. Stainless Steel can be rotary engraved and the unlacquered steel is ideal for engraving with the Cermark product line. Nickel Silver is ideal for oxidizing and for sublimation.

Typical Use • Exterior & Interior Signs • Type Plates • Serial Numbers • Barcodes • Signs with advertising impact

Brass Coated Steel Features

Metals

Material: Steel with brass plating, with or without colour coat Finish: gloss, brushed Thickness: 0.015” / 0.016” Cutting method: saw, cutting bits, shear

Laser material

Engraving material

Interior use

Exterior use

Stainless Steel and Nickel Material: Stainless Steel type 430, type 304, or Nickel Silver Finish: gloss, brushed Thickness: 0.015”/0.018”/0.020”/0.022”/0.029”/ 0.050” Cutting method: saw, cutting bits, shear

Engraving material

Interior use

Exterior use

Sublimatable Metals Sublimatable Metals incorporate a high quality coating which accepts maximum dye transfer with crisp detail. Most can be engraved after printing for additional personalization.

Typical Use • Name Badges • Awards • Photographic Reproduction • POP Displays

Sublimation Metals features Material: Aluminum, steel Finish: gloss, brushed Thickness: 0.02” / 0.025” / 0.032” / 0.04” / 0.062” / 0.125” Cutting method: saw, shear

Laser material

Engraving material

Interior use

Exterior use

Recommended Heat Setting: 380 degrees F, 35 seconds, with medium pressure. Our Unlacquered stainless steel can be engraved to black using a FIber laser or CO2 laser and Cermark compound. Nickel can be engraved the same way, or diamond dragged and oxidized to produce black text. Nickel and lacquered steel can also be sublimated.

38

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


Laserable Brass Coated Steel 12” x 24” sheets, 24” x 48” available by special order

Gloss Black/Brass 0.015“ 7113-1

Gloss Blue/Brass 0.016“ BRS LASER BLU

Gloss Purple/Brass 0.015“ BRS LASER PPL

Gloss Red/Brass 0.015“ BRS LASER RED

Laser Sub. White/Brass 0.015“ 7134-1 Sublimation

Opaque Green/Brass 0.015“ 7122-1

Opaque Blue/Brass 0.015“ 7123-1

Opaque Red/Brass 0.015“ 7116-1

Classic Marble Red/Brass 0.015“ 6335-1

Classic Marble Blue/Brass 0.015“ 6323-1

Classic Marble Green/Brass 0.015“ 6322-1

Classic Marble Grey/Brass 0.015“ 6342-1

Brass Coated Steel 0.015“ 7012-1 Sublimation Non-Laserable

Satin Copper Plated Steel 0.018“ 7010-1 Sublimation Non-Laserable

Stainless Steel and Nickel For black engravings must use Thermark

Satin Nickel Silver 0.018“ 4136-1 0.020“ 4137-1

Satin Silver Unlacquered 0.022“ 7050-1 0.029“ 7055-1 0.05“ 7060-1

Metals

Bright Silver Unlacquered 0.018“ 7051-1 0.05“ 7061-1

Satin Silver Lacquered 0.015“ 7021-1 Sublimation

Satin Stainless Steel Type 304 0.022“ 7150-1 Sublimation

Sublimation Metals 12” x 24” sheets, 24” x 48” available by special order Satin Gold Dynasub Alum 0.02“ 1128-1

Satin Silver Dynasub Alum 0.02“ 1129-1

Satin Gold Sublicoat Alum 0.025“ 3028-1

Satin Silver Sublicoat Alum 0.025“ 3029-1

Premium White 0.03“ 150-5570

Bright Gold Sublicoat Alum 0.025“ 3021-1

Bright Silver Sublicoat Alum 0.025“ 3022-1

Gloss White LaserSub Steel 0.015“ 7134-1

Satin Gold Plated Steel Subli 0.015“ 7012-1

Satin Silver Laquered S/S Subli 0.015“ 7021-1

Dynasub Satin Bronze Alum 0.02“ 1150-1

Visit our website: www.troteclaser.com

White Dynasub Alum 0.02“ 1134-1

39


DuraBlack™ DuraBlack™ is a coated aluminum with a black surface, which can be marked in white with a CO2 laser. Due to the additional layer of protection, DuraBlack is particularly resistant to environmental influences (weathering, salt water, chemicals, etc.). DuraBlack conforms with various industrial and military standards, including MIL-STD 130N, A-A-50271 (MIL-P-514D) and MIL-STD-15024F, Type L.

Typical Use • Exterior & Interior Signs • Type Plates • Badges • Materials Handling • Military Signage

Material features

Metals

Material: Coated Aluminum Surface: matte Thickness: 0.005” / 0.020” Cutting method: saw, shear

Laser material

Interior use

Exterior use

Black matte 0.02“ 7585973-D | 10“ x 12“ x 0.005“ with adhesive 7585974-D | 12“ x 20“ x 0.02“ 7585976-D | 20“ x 24“ x 0.02“

40

Cut-to-size and individual services: see page 69

Not all colour & thickness combinations are stock items, please call for availability


Alumamark™ Alumamark™ is a coated aluminum with a brushed or matte metallic surface, which can be marked in black with a CO2 laser. AlumaMark is designed in such a way that even low laser power levels can create a high-contrast engraving.

Typical Use • Interior Signs • Name Plates • Badges • Trophy Signs • Labels

Material features

Laser material

Interior use

Metals

Material: Coated Aluminum Surface: brushed or matte Thickness: 0.005” / 0.020” Cutting method: saw, shear Sheet Sizes: 12 x 20“, 10“ x 12“ or 20“ x 24“

Satin Red 0.02“ 7585205-D

Satin Gold 0.02“ 7585238-D 0.02“ 7585231-D*

Satin Yellow 0.02“ 7585206-D

Mirrored Gold 0.02“ 7585285-D

Satin Orange 0.02“ 7585207-D

Satin Bronze 0.02“ 7585270-D

Satin Green 0.02“ 7585208-D

Satin Brass 0.02“ 7585252-D 0.02“ 7585253-D*

Mirrored Silver 0.02“ 7585284-D

Matte Silver 0.02“ 7585267-D 0.02“ 7585271-D*

Satin Silver 0.005“ 7585260-D** w/ adhesive 0.02“ 7585266-D 0.02“ 7585268-D w/ adhesive 0.02“ 7585270-D*

Satin 5 Colour Pack 0.02“ 7585209-D**

Satin Blue 0.02“ 7585209-D

* 20“ x 24“

** 10“ x 12“ Visit our website: www.troteclaser.com

41


Laser Marking Compounds

Accessories

These compounds can be used to allow easier marking and higher contrast marks with a CO2 laser. The metal marking compounds produce permanent black markings, which are highly resistant to mechanical and chemical stresses as well as high temperatures. Laser Marking Compounds are available as a paste, spray or tape. The most convenient method is to apply it using a spray can. Brush application is appropriate whenever the entire surface can be coated with a single brush stroke. Spraying the paste, e.g. using an airbrush, is suitable for coating larger areas in a single step. The tape, however, is a particularly clean solution for smaller areas. The plastic marking compound allows for black marks on thermoplastics, while the compounds for ceramics and glass produce coloured marks on these materials (YAG or Fiber laser recommended).

42


Name

Plastic Marking

Reference number

50g

75160

LMC-6001P Bronze

250g

75163

LMC-6001P Bronze

50g

75164

LMC-6013P Blue

250g

75165

LMC-6013P Blue

50g

75166

LMC-6044P Black

250g

75168

LMC-6044P Black

50g

75172

LMC-6044P Black

12oz

75176

LMC-6062P Green

250g

75177

LMC-94 Imitation Etch/White

250g

75179

LMC-94 Imitation Etch/White

50g

75180

LMC-98 Bright White

250g

75181

LMC-98 Bright White

50g

75182

LMM-14 Black for Metal

250g

75183

LMM-14 Black for Metal

50g

75184

LMM-14 Black for Metal

6oz. Aerosol

75186

LMM-6000 Black for Metal

250g

75187

LMM-6000 Black for Metal

50g

75188

LMM-6000 Black for Metal

500g

75189

LMM-6000 Black for Metal

12oz Aerosol

75190

Black Marking Tape

1 in x 50 ft roll

75191

Black Marking Tape

2 in x 50 ft roll

75192

LMM-6038 Black for Smooth & Polish Metals

250g

75194

LMM-6904 for Aluminum

50g

75195

Visit our website: www.troteclaser.com

Accessories

LMC-12 Black for Plastic

Ceramic and Glass Marking

Metal Marking

Content

43


Laser Rubber Laser rubber product range for various stamp applications. Our innovative stamp rubbers convince with their excellent engraving and impression quality and can be engraved particularly quickly.

AERO: Odourless laser rubber • Odourless during engraving • 25% faster than other odourless laser rubbers • Especially easy to clean • Solvent resistant

Laser Rubber

AERO

AERO

8.27“ x 11.69“ (A4)

11.69“ x 16.53“ (A3)

0.09“

0.09“

Colour

Light grey 850208

Light grey 850208

Hardness

60° Shore

60° Shore

34192

36877

Size

Accessories

Thickness

Reference number

44


Paint for Acrylic Acrylic paints are optimal for colour filling engraved plastics to allow for multi coloured artwork. The colours are highly opaque and durable. They are particularly well suited for colour-filling the back of the engraved plates with an even distribution.

Paint for Acrylic

Colour

Size

Reference number

Black

1 oz

74163

Red

1 oz

74164

White

1 oz

74165

Blue

1 oz

74166

Bronze

1 oz

74167

Copper

1 oz

74168

Silver Bright Gold Black Bright Gold Pro Colour Fill Kit - 8 Colours Deluxe Pro Colour Fill Kit - 12 Colours Stone Fill Gold Stone Fill Silver Stone Fill Black Stone Colour Fill Kit - 5 Colours

1 oz 1 oz 4 oz 4 oz Kit Kit 1 oz 1 oz 1 oz Kit

74169 74170 74198 74224 74176 74153 74230 74232 74233 74158

Acrylic Cleaning and Polishing Accessories

Accessories for finishing acrylic and other laserable plastics.

Contents

Reference number

Novus 1 Acrylic Cleaner

8 oz

74159

Novus 2 Acrylic Polisher

8 oz

74160

Novus 3 Heavy Scratch Remover

8 oz

74162

Cloth

741161

Anti Static Cleaning Cloth

Visit our website: www.troteclaser.com

45


Badge Findings All badges engrave to gold. For colour, you can oxidize or colour fill after engraving.

Fasteners 128-211S

White Bar Pin Plastic 1.5“ Long Self-Adhesive

128-612SG

Military Bar 2“ Vinyl with Clutch Self Adhesive

128-211P

White Bar Pin Plastic 1.5“ Long Non-Adhesive

128-612PG

Military Bar 2“ Vinyl with Clutch Non-Adhesive

128-103S

Bar Pin Metal, 1.5“ Long Self-Adhesive

128-611PG

Single Tack with Clutch

Clips 128-503P

Accessories

Bull Dog Pressure Clip Plastic Base 3/4“ x 3/4“

128-503S

Badge Clip, Metal 3/4“ Square Swivel Self-Adhesive

128-205H

Metal Clip with Clear Swivel Strap

Magnets 128-MO1

128-MO2

128-MO3

Steel Cover Magnet

Plastic Cover Magnet

Plastic Cover Magnet

128-MO4

Round Magnet

46

128-MO5

Triple Magnet Plastic Cover

128-103P

Bar Pin Metal, 1.5“ Long Non-Adhesive


Metal Name Badges

3/8“ x 2 1/4“ Satin Gold

1/2“ x 2 3/8“ Bright Gold

5/8“ x 2 1/2“ Satin Silver

3/4“ x 3“ Bright Silver

Clutch

Pin Back

Blank

Bright Gold

352-MBG38C

352-MBG38P

352-MBG38CB

Satin Gold

352-MSG38C

352-MSG38P

352-MSG38CB

Bright Silver

352-MBS38C

352-MBS38P

352-MBS38CB

352-MSS38P

Satin Silver

352-MSS38C

Chrome Plated

352-MCP38C

352-MSS38CB

Finish Colour

Clutch

Pin Back

Blank

Bright Gold

352-MBG12C

352-MBG12P

352-MBG12CB

Satin Gold

352-MSG12C

352-MSG12P

352-MSG12CB

Bright Silver

352-MBS12C

352-MBS12P

352-MBS12CB

352-MSS12P

352-MCP38CB

Satin Silver

352-MSS12C

Chrome Plated

352-MCP12C

352-MSS12CB

Finish Colour

Clutch

Pin Back

Blank

Bright Gold

352-MBG58C

352-MBG58P

352-MBG58CB

Satin Gold

352-MSG58C

352-MSG58P

352-MSG58CB

Bright Silver

352-MSB58C

352-MSB58P

352-MSB58CB

352-MSS58P

352-MCP12CB

Satin Silver

352-MSS58C

Chrome Plated

352-MCP58C

352-MSS58CB

Finish Colour

Clutch

Pin Back

Blank

Bright Gold

352-MBG34C

352-MBG34P

352-MBG34CB

Satin Gold

352-MSG34C

352-MSG34P

352-MSG34CB

Bright Silver

352-MSB34C

352-MSB34P

352-MSB34CB

Satin Silver

352-MSS34C

352-MSS34P

352-MSS34CB

Chrome Plated

352-MCP34C

Finish Colour

Clutch

Pin Back

Blank

Bright Gold

352-MBG1C

352-MBG1P

352-MBG1CB

Satin Gold

352-MSG1C

352-MSG1P

352-MSG1CB

Bright Silver

352-MSB1C

352-MSB1P

352-MSB1CB

Satin Silver

352-MSS1C

352-MSS1P

352-MSS1CB

Chrome Plated

352-MCP1C

352-MCP58CB

352-MCP34CB

Accessories

1“ x 3“ Chrome Plated

Finish Colour

352-MCP1CB

Name Tag Blanks Engraving also available

Trotec Laser Canada makes custom name badge blanks. We are able to make virtually any shape and size, ranging from your basic rectangle bevelled tags, rounded corners or custom shapes.

Visit our website: www.troteclaser.com

Your Logo Here

Your Customer Information Here Address Here

47


Badge Accessories Brass Ornamental Plates Part Number

Sizes

Colour

75701

3/8 x 2 1/2 brass ornamental plate

Satin Gold

75702

1/2 x 3 brass ornamental plate

Satin Gold

75703

3/4 x 3 1/2 brass ornamental plate

Satin Gold

75704

3/4 x 4 brass ornamental plate

Satin Gold

Split Rings Part Number

Size

Quantity

Colour

440-76000

1/2“

100/box

Silver

440-76400

1“

100/box

Silver

440-76600

1 1/4“

100/box

Silver

440-77400

1“

100/box

Brass

Brass Tags w/ Hole Part Number

Size

Quantity

Hole Size

440-26006

3/4“

100/box

4 mm

440-26010

1“

100/box

4 mm

440-26012

1 1/4“

100/box

7 mm

440-26013

1 3/8“

100/box

7 mm

440-26017

1 7/8“

100/box

8 mm

Accessories

Ball Chain Part Number

Size

Quantity

Colour

440-31700

No. 6 Ball Chain

100ft Spool

Nickel Plated Steel

440-32100

No. 3 Ball Chain

100ft Spool

Nickel Plated Steel

440-31900

No. 6 Connector Ball Chain

100/pkg

Nickel Plated Steel

440-32900

Ball Chain End Couplings

100/pkg

Nickel Plated Steel

440-32250

No. 3 Connector Ball Chain

100/pkg

Aluminum

440-31400

No. 6-4 1/2“ Ball Chain (Pre-Cut)

100/pkg

Nickel Plated Steel

S Hooks

48

Part Number

Size

Quantity

Colour

972-902-0S

1/2“ Tall

25/bag

Silver

972-901-0G

1/2“ Tall

25/bag

Brass


Braille Accessories Braille Rasters Part Number

Sizes

73672

Pure Adhesive Tape 0.5 inch x 18 yar

73673

Black Acrylic Rasters 10,000 UV Stab

73674

Clear Acrylic Rasters 10,000 UV Stab

73675

White Acrylic Rasters 10,000 UV Stab

73676

Stainless Steel Rasters 1000

73678

Stainless Steel Raster Spheres- 10000

Braille Cutters Part Number

Sizes

73686

Raster Braille Cutter 11/64"

73687

Raster Braille Cutter 1/4"

73685

Raster Braille Cutter for Acrylic 11/64"

73688

Raster Braille Cutter for Acrylic 1/4"

73665

Braille Drill Bit for Metals

73666

Raster Endmill for Stainless Steel

The Raster braille system is a patented process. A valid license is required for purchase on these items.

Accessories

Visit our website: www.troteclaser.com

49


Tapes, Velcro & Adhesive Sublimation Heat Tape Part Number

Description

Sizes

058-CW-215-1272

High Temperature Tape for Sublimation

1/2“ x 60 yrds

Engraving Table Tape Part Number

Description

Sizes

058-TWO-SIDED

Two-Sided Table Tape

1/2“ x 72 yrds

058-TT7147-1966

Two-Sided Table Tape

3/4“ x 60 yrds

Adhesive Rolls and Sheets Part Number

Description

Sizes

0583M-ADHESIVE

3M Adhesive

3M Adhesive #9502 24“ x 60 yrds

0583M-468MP

3M Adhesive

3M Adhesive #468MP 24“ x 60 yrds

0583M ADH SHEETS 0583M ADHESIVE12 0583M-467MP 058S234

3M Adhesive 3M Adhesive 3M Adhesive Economy Adhesive

3M Adhesive #9502 12“ x 24“ 3M Adhesive #9502 12“ x 60 yd 3M Adhesive #9141 12“ x 180 yd Tape, S234 Double Coated 12“ x 60 yds

Accessories

Magnetic Tape Part Number

Description

Sizes

670-PSA-.5

Magnetic Tape w/ PSA

0.060“ x 100‘ x 0.5“

670-PSA-.75

Magnetic Tape w/ PSA

0.060“ x 100‘ x 0.75“

670-PSA-1

Magnetic Tape w/ PSA

0.060“ x 100‘ x 1“

623SUS 225

Magnetic Sheet w/ PSA

12“x24“ Self Adhesive

Velcro Rolls Part Number

50

Description

Sizes

305-190911

Velcro Loop Black

3/4“ x 25 yrds

305-190940

Velcro Hook Black

3/4“ x 25 yrds

305-196256

Velcro Loop Black

1/2“ x 25 yrds

305-196802

Velcro Hoop Black

1/2“ x 25 yrds

305-190984

Velcro Loop Black

1“ x 25 yrds

305-191051

Velcro Hoop Black

1“ x 25 yrds

305-190899

Velcro Loop White

3/4“ x 25 yrds

305-190935

Velcro Hook White

3/4“ x 25 yrds

305-195472

Velcro Loop White

1/2“ x 25 yrds

305-195473

Velcro Hook White

1/2“ x 25 yrds

305-190959

Velcro Loop White

1“ x 25 yrds

305-191033

Velcro Hook White

1“ x 25 yrds


Foam Tape Part Number

Thickness

Sizes

058-CW3016-.5

1/16“

1/2“ x 36 yrds

058-CW3016-.75

1/16“

3/4“ x 36 yrds

058-CW3016-1

1/16“

1“ x 36 yrds

058-CW3016-1.5

1/16“

1 1/2“ x 36 yrds

058-CW3032-.38

1/32“

3/8“ x 72 yrds

058-CW3032-.5

1/32“

1/2“ x 72 yrds

058-CW3032-.75

1/32“

3/4“ x 72 yrds

058-CW3032-1

1/32“

1“ x 72 yrds

058-CW3032-2

1/32“

2“ x 72 yrds

058-S400818-.75

1/8“

3/4“ x 25 yrds

Double Sided Application Tape - Scapa Part Number

Sizes

0584403-.25

1/4“ x 36 yrds

0584403-.5

1/2“ x 36 yrds

0584403-.75

3/4“ x 36 yrds

0584403-1

1“ x 36 yrds

0584403-1.5

1 1/2“ x 36 yrds

0584403-2

2“ x 36 yrds

0584403-3

3“ x 36 yrds

0584403-4

4“ x 36 yrds

0584403-12

12“ x 36 yrds

Double Sided Application Tape - TESA Sizes

058TT4970-.38

9mm x 55m (3/8 in)

058TT4970-.5

12mm x 55m(1/2 in)

058TT4970-.75

19mm x 55m (3/4 in)

058TT4970-1

25mm x 55m (1 in)

058TT4970-1.5

38mm x 55m (1.5 in)

058TT4970-2

50mm x 55m (2 in)

058TT4970-3

75mm x 55m (3 in)

058TT4970-4

101.6mm x 55m (4 in)

Accessories

Part Number

Masking Part Number

Sizes

Part Number

Sizes

058-GXP775-6

6“ x 72 yrds

058A754288

Film, Blue PVC Surface 3mil x 12“ x 330

058-GXP775-8

8“ x 72 yrds

623SUS 188

LiquaMask - Half Gallon

058-GXP775-12

12“ x 72 yrds

623SUS 189

Liquid Mask - Quart

700LASERS EDGE

6“ x 25 yds Lasers ft Edge (red)

Visit our website: www.troteclaser.com

51


Tapes, Velcro & Adhesive Felt Pads Part Number

Description

Sizes

972-928-00

1/2“ diameter

1,000/roll

Oxidizer Part Number

Description

Volumes

786-A384-8

A-384 Oxidizer for Aluminum

8 oz

786-A384-4

A-384 Oxidizer for Aluminum

4 oz

786-B/OX324-8

B/OX 324 Oxidizer for Brass

8 oz

786-B/OX324-4

B/OX 324 Oxidizer for Brass

4 oz

Multi Mat Part Number

Description

Sizes

G01-MULTI MAT

Sold by the Square Foot

Master Sheet - 24“ x 48“

Laser Foil

Accessories

Part Number

Description

Sizes

700-FOIL BLUE

Metalized Blue Foil

6“ x 25‘

700-FOIL BR GOLD

Metalized Bright Gold Foil

6“ x 25‘

700-FOIL GREEN

Metalized Bright Green Foil

6“ x 25‘

700-FOIL RED

Metalized Red Foil

6“ x 25‘

700-FOIL SILVER

Metalized Bright Silver Foil

6“ x 25‘

700-FOIL STN GOLD

Brushed Gold Foil

6“ x 25‘

Cleaning Products

52

Part Number

Description

TRP69248

LENS CLEANER

TRP69249

LENS TISSUE

875-20009

4oz Triflow Lubricant

Not all colour & thickness combinations are stock items, please call for availability


Cable Tags Trotec Laser Canada stocks stainless steel cable tags in the most common sizes and configurations, all laser cut or die punched to ensure consistency from piece to piece and from order to order. They are ideal for use with the Cermark metal marking compounds, or for direct marking with Fiber lasers or rotary engravers. Custom sizes and hole configurations are available upon request.

Part Number

Description

TAG1.5SS

1 1/2 in Dia. Tag w/ .250 in hole, #304

TAG1H343

3/4 x 3 Cable tag with 1/8 holes, #304 SS

TAG1H343.25H

3/4 x 3 Cable tag with 1/4 hole, #304 SS

TAG3/4X4

3/4 x 4 Cable tag with 4 slots, #304 SS

TAGCABLE .75X3SS

3/4 x 3 Cable tag with 4 slots, #304 SS

TAGCABLE 1X2SS2H

1 x 2 Cable tag w 2 holes (.125) #304 SS

TAGCABLE 1X3

1 x 3 Blank Cable tag SS - no holes

TAGCABLE 1X3SS

1 x 3 Cable tag with 4 slots, #304 SS

TAGCABLE 1X3SS1H

1 x 3 Cable tag w 1 hole (.250) #304 SS

TAGCABLE 1X3SS2H

1 x 3 Cable tag w 2 holes (.125) #304 SS

TAGCABLE 1X3SSUM

1 x 3 Cable tag with 4 slots, unmasked

TAGCABLE 1X4

1 x 4 Cable tag with 1 hole .250

TAGTG12-0003

2 in Dia. tag with 1 hole, #304 #4 SS

1 x 2 Cable tag w 2 holes (.125)

3/4 x 3 Cable tag with 4 slots

1 x 3 Cable tag w 2 holes (.125)

1 x 3 Cable tag with 4 slots

2 in Dia. tag with 1 hole

Accessories

3/4 x 3 Cable tag with 1/4 hole

Visit our website: www.troteclaser.com

1 x 3 Cable tag with 1/4 holes 3/4 x 3 Cable tag with 1/8 holes

53


Trophy Shields & Pet Tags Our trophy shields and pet tags are die punched for consistent size and quality, from the best engraveable materials for easy personalization.

Trophy Shields Bright Silver 1.5“ x 1.25“ 971-SH1-1022

Satin Gold 1.5“ x 1.25“ 971-SH1-1028

Bright Gold 1.5“ x 1.5“

1.5“ x 1.25“ 971-SH1-1021

1.5“ x 1.25“ 971-SH1-1029

1.5“ x 1.25“ 971-SH1-1033

1.5“ x 1.5“

Bright Silver 971-SH10-1033

Bright Silver 971-SH4-1033

Satin Silver

Black

Black 971-SH10-1021

Black 1.5“ x 1.5“

Bright Gold

1.5“ x 1.5“

1.5“ x 1.5“

971-SH10-1022

Bright Gold 971-SH4-1022

1.5“ x 1.5“

971-SH4-1021

Accessories

Laserable Shields

Matte Silver (will laser to black) 1.5“ x 1.25“ 971-SH1-1429

Gloss Black (will laser to gold) 1.5“ x 1.25“ 971-SH1-1095

Matte Gold (will laser to black) 1.5“ x 1.25“ 971-SH1-1429

Gloss Black (will laser to gold) 1.5“ x 1.5“ 971-SH10-1095

Anodized Military Dog Tags Pink 2“ x 1.125“

2“ x 1.125“

Green 2“ x 1.125“

623-NUS 338

623-NUS 180

623-NUS 179

Red

Blue

Black

2“ x 1.125“

623-NUS 178

Purple 2“ x 1.125“

623-NUS 169

54

Yellow

2“ x 1.125“

623-NUS 177

2“ x 1.125“

623-NUS 176


Anodized Aluminum Pet Tags

Gold

Red

Blue

Purple

Green

Red

Purple

Blue

1 1/16“ x 1 9/16“ 3/4“ x 1 1/16“

Black

Gold

Silver

1“ x 1“

Green

Pink

Bone Large - 951-L 1A Bone Small - 951-S 1A

Pink

1 1/32“ x 1 5/16“ 1“ x 7/8“

Red

Green

951-L 4A

Pink

Blue

Purple

Gold

Black

Silver

Blue

Purple

Green

Red

Purple

Green

Blue

Black

1 5/16“ x 1 1/8“ 3/4“ x 7/8“

Hydrant Large - 951-L 6A Hydrant Small - 951-S 6A

Heart Large - 951-L 6A Heart Small - 951-S 6A

1 1/4“ Dia.

Gold

Red

951-L 15A

Silver

7/8“ x 1 1/16“ 951-L 17A

Blue

Blue

Green

Green

Gold

Red

Purple

Red

Purple

Accessories

Silver

1 1/2“ x 1 1/16“ 951-L HOUSE

Stainless Steel Pet Tags Fire Hydrant 1 1/16“ x 1 7/16“ 0.032

Dog Bone 1“ x 1 1/2“ 0.032

951-L 6 SS

951-L 1 SS

Heart

Circles

951-L 9 SS

951-L 15 SS

1 1/4“ x 1 1/8“

Visit our website: www.troteclaser.com

Ring Top 1 5/16“ Diameter

972-991-00

1 1/4“ Diameter

55


Engraving Cutters Our engraving cutters are made from Premium Micrograin carbide for superior edge quality and tool life. They are available in sizes to fit any rotary engraving machine.

Half-Round Standard Cutters

Profiler Cutters

Traditional design. Recommended for flexible engraving stock, and has application in surface hardened materials such as cast iron. 350-18C.*** 350-184C.***

350-1164C.*** 350-14C.***

A cutter with a narrow profile effective for cutting out shapes. This type of tool is stronger than a parallel cutter that is sharpened less than its diameter and can be used when a slight bevel is acceptable 351-18DB.*** 351-1164DB.*** 351-14DB.***

Quarter Round Cutters

Parallel

Similar to the half round cutter, except that the heel half of the cutter is removed, providing the ultimate amount of clearance to facilitate chip removal

A parallel cutter will produce a cut with straight edges compared to the “V“ or angled cut from a standard tool.

350-1164QR.*** 350-14QR.***

350-18QR.***

Cutter-Beveler

These cutters have been designed using end mill and router bit technology to produce a tool that offers cleaner, faster cuts in a variety of materials at the high spindle speeds typically associated with engraving machines and routers.

2” long R2-250-2F

350-18CTBV.***

Accessories

Bevel Cutter

X=30°

Y=45°

Beveling is the process of creating a sloped edge on a plate, most often through the use of a 30° or 45° cutter and a beveling machine. A cutter with a 45° cutting angle is the most popular choice because it creates a more pronounced cut by exposing more of the core material. 350-181BVL 350-184BVL 350-1164BVL

Cutter Available In 11/64“ (.172“) Diameter 1/4“ (.25“) Diameter 1/8“ (.125“) Diameter

*** = TIP SIZE

56

350-18P.***

RouterMills® (EndMill) Cutters

Cuts out and bevels in one smooth operation. A cutter-beveler has a parallel cutting edge which profiles or cuts through the material, while the angle edge produces a 45 bevel for a depth of 1/3 to 1/2 of the material thickness. Available for 1/16“ and 1/8“ thick materials 350-1164CTBV.*** 350-14CTBV.***

350-1164P.*** 350-14P.***

6” long RM-171-2F RM-250-2F RM-171-3F RM-250-3F RM-171-4F RM-250-4F


Diamond Tools Diamond is the hardest substance known and the most resistant to abrasion. The unique geometry of the diamond engraving tool, with its highly polished surface, provides the brilliantly reflective lines of top quality engraving. The point of the drag engraver and cutting edge of the diamond burnisher are sharpened to micro-precision tolerances that simply last and last.

Diamond Drag Tool

Pen Burnisher

The rotating pen engraver brings high quality to the difficult task of engraving coated pens and will engrave many pens that were previously deemed unengraveable. 351-1164PEN 351-14PEN

Non-rotating tools with a diamond tip intended for scratch engraving on trophy brass and aluminum. *** = Angle

351-18DMD.*** 351-1164MD.*** 351-14DMD.***

Rotating Diamond Burnishers

Deep Diamond Burnishers

For glass engraving and burnishing. Particularly effective on coloured aluminum and brass.

For deeper engraving in metal, particularly stainless steel

351-18DB.*** 351-1164DB.*** 351-14DB.***

351-1164DEEP.*** 351-14DEEP.***

*** = Tip Size

Selecting the Appropriate Tip Width

1/16

3/32

1/8

3/16

1/4

3/8

1/16

1/2

5/8

1

1 3/8

0.005

0.010

0.015

0.020

0.030

0.045

0.060

0.075

0.090

0.125

0.171

Accessories

The chart below displays the most commonly used letter height/tip width combinations for single line fonts. When engraving single stroke characters, we recommend that the width of the cut be approximately 12% of the letter height to achieve proportional letters. For example: engraving a 1/2” (0.5”) letter, the stroke should be 0.06” (0.5” x 12% = 0.06). Cutters and burnishers are available in any required tip size ranging from a point (0.000”) up to the full shank diameter. Maximum stroke width of 1/8” cutter is 0.125”; 11/64” cutter is 0.171”; 1/4” cutter is 0.25”.

2

Letter Height Recommended Stroke Widths

Visit our website: www.troteclaser.com

0.250

57


Fabrication Equipment Heavy Duty 12” Table Shears Put a stop to sawing valuable materials into chips. Using this precision shear you can produce a sheet of engraved plates, and cut them down to final size ‘on the line’. No waste - easy operation - safe. - Cut up to 1/8” plastic easily - Steel scale recessed into the table to prevent material - Cuts aluminum 0.040” maximum, and trophy brass from sliding underneath 0.025” maximum thickness - High quality Tool Steel blades - Ideal for cutting name plates, badges and strips - Plastic blade is acute ground, and metal cutting blade - Clean cut, does not burr obtuse ground. Specify the material being cut in your - Cuts up to 12” width x any length. shears when ordering. Either metal or plastic blade is Safety guard included supplied with the machine - Three positions provided for the movement of the scale to allow a more efficient cut and longer Part Number Description blade life 2001Re/12“

12“ Table Shear for Metal

2001Re/12“ P

12“ Table Shear for Plastic

Replacement Table Shear Blades & Parts Part Number

Description

2001UP-BLP

Top blade (Plastic cutting)

2001UP-BLM

Top blade (Metal cutting)

2001UP-BLL

Bottom blade for either

Part# RULER

Metal Replacement Ruler

Part# RLR

Stick-On Ruler

Accessories

Shear Accessories Tru-Square - When material is cut on a shear, it can creep or move from the cutting force of the shear. A Tru-Square helps prevent this. When installed, it forms a right angle with the ruler and is parallel to the blades. As the material is cut, the cutting force pushes it into the Tru-Square. The material can’t move, and creep is eliminated. The Tru-Square also serves as a front gauge and is an invaluable aide for making accurate, repetitive plaques (Note: With the new Step Ruler, only the Tru-Square Guide is required!)

58


Corner Punch The Maxi-Press is designed for versatile uses, including hole punching, notching, and rounding nameplates. It can produce notched corners, rounded corners, a centre hole punch, and a combination punch and notch. This tool produces burr-free results with each cut, adding beauty and style to nameplates. 095-MAXI 3/32

Part Number

Description

MAXI 3/32

Maxi-Press with 3/32“ Hole Punch

MAXIPRESS

Maxi-Press with 1/8“ Hole Punch

Part Number

Description

CM40

Cornermate ( dies sold separately )

CM40E

Electric Cornermate ( dies sold separately)

Visit our website: www.troteclaser.com

Accessories

The Cornermate® Series is the new standard for cutting corners, holes and slots in plaques, badges, signs, and other items. There are over thirty interchangeable cutting units from 1/8” to 1”. All units are precision engineered, and will produce flat, crisp shapes in photographic paper, laminations, magnetics, flexible plastic, aluminum, brass, and many other material. Each cutting unit has the material guides machined into the body of the unit so the location of the cut is always the same. Insert the material, and squeeze the handle. It’s that simple and quick! CM40

59


Fabrication Equipment Cornermate Cutting Units Type

Sizes

Round

1/8“, 3/16“, 1/4“, 5/16“, 3/8“, 1/2“, 3/4“, 1“

Notch

1/8“, 3/16“, 1/4“, 3/8“, 1/2“, 3/4“, 1“

Scallop

1/4“, 3/8“, 1/2“

Chamfer Hole Punch

1/4“, 3/8“ 3/32“, 1/8“, 3/16“

Slot

1/8“ x 9/16“

Cornermate Capacity Type

Capacity

Aluminum

0.040“

Half Hard Brass

0.025“

Flexible Plastic

0.125“

Brass Plated Steel

0.015“

Disc Fabrication Trotec Laser Canada fabricates 1”, 1 1/2”, and 2” discs in-house. We die punch stock aluminum, brass materials up to 0.025” thick, and brass coated steel up to 0.018” thick.

Accessories

Custom order additional sizes. Contact us for a quote. Minimum order and lead time required. Discs available in rotary, laserable and sublimatable stock.

60

2”

1.5”

1”


Bevelers Material Beveler A simple operation that provides smooth, beveled edges for your finished signs. Interface with virtually any shop vac with a 1 1/4” vacuum hose to help keep work area chip-free. Durable steel 3” x 12” material table. 117 volt, 60 Hz motor. Includes: 1 solid carbide 45 degree edge beveler cutter; 2 hex wrenches, 3/32” and 5/32”; slide; operating instructions. Shipping weight, 9lbs. SM98A Large Material Beveler The same as for simple operation SM98A. A large steel table 8” x 22” for greater stability and speed. 117 volts or 230 volts, 60 Hz motor includes a carbide cutter chamfering edges with 45 degree, 2 hex wrenches 3/32”, 5/32”, a slide; operating instructions. The package for delivery weighs 12 lbs. SM99A Quality One Beveler This machine cuts an edge angle, gives a beautiful finish to your material. It is designed for continuous operation on all materials up to 1/4” thick. The table measures 4” x 16 1/2”. Q1BEV

Heat Benders Strip Heaters for Acrylic Sheet Bending This heavy duty stripheater is designed to place a narrow strip of heat on an acrylic plastic sheet until it is soft and pliable enough to bend to the desired form. It is capable of heating sheets up to 1/2” thick.

Accessories

- Thermostat controlled low/high setting - On/Off switch - Pilot light

- Cord winding bracket - Very sturdy sheet metal construction and baked enamel paint. EMX-2

EMX-2

625

Watts:

115AC

Volts: Length:

48“

Width:

7“

Visit our website: www.troteclaser.com

61


JRS Sign Frames JRS Sign Frames and Holders are made from high quality components in the USA. They perfectly accent your engraved plastic nameplates, and add a finished look to directional and tactile signage. Custom frames can be made to your specifications, call for a quotation on your design.

Available Finishes: Bright Rose Gold, Bright Silver, Satin Silver, Black, Bright Yellow Gold

Desk Holders

A

Accessories

B

Part No.

Insert Size A

Insert Size B

85

3/4“

1/16“

25

1“

1/16“

54

1-1/4“

1/16“

70

1-1/2“

1/16“

19

1-1/2“

1/8“

14

1-5/8“

1/16“

48 11 16

2“ 2“ 3-1/4“

1/16“ 1/8“ 1/8“

A

Part No.

Insert Size A

Insert Size B

59

2“

1/16“

Available Lengths: 8” / 10”

B

Available Lengths: 4” / 6” / 8” / 10” / 12”

A

B

Part No.

Insert Size A

Insert Size B

85

3/4“

1/16“

25

1“

1/16“

Available Lengths: 8” / 9” / 10”

62

A

B

Part No.

Insert Size A

Insert Size B

85

3/4“

1/16“

25

1“

1/16“

Available Lengths: 8” / 9” / 10”


Counter & Desk Bases

Part No.

Insert Size A

Insert Size B

Max. Sign Height

Part No.

Insert Size A

Insert Size B

Max. Sign Height

15

3/4“

1/16“

2“

35

1-1/4“

1/16“

6“

50

15/16“

1/16“

3“

42

1-1/4“

1/8“

6“

97

1-7/16“

1/16“

7“

22

2-1/2“

1/16“

12“

4“ 8“

39

1-1/4“

3/32

6“

17 55

1-3/32“ 2-1/2“

1/8“ 1/8“

Available Lengths: 3/3-4” / 8” / 10” / 12”

Available Lengths: 6” / 8” / 10” / 12”

Part No.

Insert Size A

Insert Size B

Max. Sign Height

Part No.

Insert Size A

Insert Size B

Max. Sign Height

40

1-1/4“

1/16“

2“

P100

2“

1/16“

6“

Available Lengths: 8” / 10”

Available Lengths: 3-3/4” / 8” / 10” / 12”

Wall & Corridor Brackets Insert Size A

Insert Size B

86

1/2"

1/16"

100

5/8"

1/16"

44

3/4"

1/16"

28

1"

1/16"

47

1-1/4"

1/16"

29

1-1/2"

1/16"

95 46 87 88 36 94 89 90 37 52 49 51

1-1/2" 1-5/8" 1-3/4" 1-3/4" 2" 2" 2-1/2“ 2-1/2" 3" 3" 4" 4"

1/8" 1/16" 1/16" 1/8" 1/16" 1/8" 1/16" 1/8" 1/16" 1/8" 1/16" 1/8"

A

B

Part No.

Insert Size A

Insert Size B

56 57

1" 1-1/2"

1/16" 1/16"

58

2"

1/16"

Available Lengths: 4” / 6” / 8” / 9” 10” / 12” / 35”

Part No.

Insert Size A

Insert Size B

38

2-1/2“

1/8“

Accessories

Part No.

Available Lengths: 2” / 3” / 4” / 5” 10” / 12” / 36”

Available Lengths: 4” / 6” / 8” / 10” / 12” / 35”

Visit our website: www.troteclaser.com

63


Desk Holders Insert Size A

Part No.

B

23

c

Insert Size B

2“

Insert Size C

1-1/2“

A

Part No.

B

1/16“

c

Available Lengths: 9” / 10” / 12”

Insert Size A

Insert Size B

71

1-1/4“

1-1/4“

1/16“

33

2“

2“

1/16“

Available Lengths: 6” / 8” / 10”

A

Insert Size A

Part No.

B

61

Insert Size B

1“

Insert Size C

1-1/4“

Part No.

A

Insert Size A

60

1/16“

Available Lengths: 8” / 10”

B

c

2“

Insert Size B

1-1/2“

Available Lengths: 6” / 8” / 10”

Desk Holders

Part No.

Insert Size A

Insert Size B

Insert Size C

Insert Size D

Part No.

Insert Size A

112

1-1/2"

1-1/2"

1-1/2"

1/16"

75

1/16"

106

1"

1"

1"

1/16"

83

1/16"

109

3/4"

3/4"

3/4"

1/16"

Available Lengths: 6” / 8” / 10” / 36”

Available Lengths: 6” / 8” / 10” / 36”

Part No.

Insert Size A

Insert Size B

Insert Size D

115

2"

1"

1/16"

107

1-1/2"

1"

1/16"

108

1-1/4"

3/4"

1/16"

Accessories

Available Lengths: 6” / 8” / 10” / 36”

Part No.

Insert Size A

Insert Size D

103

1-1/2"

1/16"

114

3/4"

1/16"

Available Lengths: 6” / 8” / 10” / 36”

Part No.

Insert Size A

76

1/16"

84

1/8"

Available Lengths: 36” Part No.

27

Insert Size A

1/16"

Available Lengths: 36”

Part No.

78

Insert Size A

1/16"

Available Lengths: 36”

Part No.

77

Insert Size A

1/16"

Available Lengths: 36”

64

Insert Size C

Insert Size C

1/16“


Architectural Aluminum Frames Part No.

Insert Size

Style

341-66

1/16"

3/8" Radius Corner

641-66

1/8"

3/8" Radius Corner

241-66

1/16"

Square Corners

541-66

1/8"

Square Corners

Available Lengths: 6” x 6” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.

Part No.

Insert Size

Style

341-88

1/16"

3/8" Radius Corner

641-88

1/8"

3/8" Radius Corner

241-88

1/16"

Square Corners

541-88

1/8"

Square Corners

Available Lengths: 8” x 8” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.

Part No.

Insert Size

Style

344-23

1/16"

3/8" Radius Corner

644-23

1/8"

3/8" Radius Corner

244-23

1/16"

Square Corners

544-23

1/8"

Square Corners

Visit our website: www.troteclaser.com

Accessories

Available Lengths: 2” x 13” slider frame is designed for 2” x 10” message plate to slide left or right to expose message at opposite end.

65


Flat Bed Lasers

Speedy family and SP series

The CO2 laser devices from the Speedy family are ideal for engraving and cutting a variety of materials, such as laminates, stamp rubbers, acrylic, wood, paper, cardboard and many more. Fiber lasers are ideal for laser marking of metals and plastics. Both laser sources are integrated into the devices of the Speedy flexx

series; maximum flexibility for each application is thus guaranteed. Process virtually any material with a processing area of up to 1000 x 610 . The SP series with a processing area of 1500 x 1250 is great for precision processing large materials at high speeds.

Endless Possibilities

Laser Devices

Process a virtually unlimited range of materials: With Trotec laser engraving devices, stamps can be produced within minutes and series production is also significantly streamlined.Customize honourary prizes, such as trophies or football trophies in the blink of an eye.

Or score highly with clear acrylic cuts: Exceptional shapes for displays, signs and neon signs create more interesting and sophisticated end products. From simple rectangular advertising signs to complex contours and labels, anything is possible with Trotec lasers.

About Us Trotec is a world leader in the field of laser technology and sets new standards. The Upper Austrian innovation leader offers solutions for almost any requirement of the laser marking, engraving and cutting technology sector. Its laser devices stand for quality, reliability and innovation. We manufacture flat bed laser devices, galvo laser systems and exhaust systems.

66


Galvo Lasers

ProMarker and SpeedMarker series

The ProMarker series offers simple high speed laser processing of metal and plastic parts, such as promotional items, gifts, identification plates and much more. Choose between the ProMarker 100, an open Class 4 laser marking station with precision Z-axis or the compact ProMarker 300, a table marking station, which is characterized by its ergonomics and safety (laser safety class 2). The SpeedMarker series, developed for efficient

laser marking of metals and plastics along the entire industrial production chain, offers the perfect combination of intelligent software and highquality engineering. The laser systems are available in 4 different sizes and in different configurations, to optimally meet your requirements: SpeedMarker 100, SpeedMarker 300, SpeedMarker 700, SpeedMarker 1300.

Demanding marking tasks Whether you are producing and finishing of high-quality advertising materials or marking of identification plates or components in large quantities - metals and plastics can be optimally marked with high performance galvo lasers from the ProMarker or SpeedMarker series.

Laser Devices

About Us All of our products are manufactured in Austria. At Trotec, you will also find an extensive selection of engraveable materials for laser and mechanical engraving as well as signage and marking accessories. You will receive only the highest quality materials with simple processing properties. Trotec has more than 300 employees and serves customers in over 90 countries. For more information, please visit www.troteclaser.com.

67


Air Filter Supplies

QUATRO Air Technologies Inc.

Model SPH - 426 Filtter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack) 514-F071 - Disposable Filter Bag - (6 per pack) 514-AG097 - Chemical Filter for SPH426 514-AB010 - Motor Brushes & Discharge Pad 514-F074 - HEPA Filter (Replacement of each filter will vary depending on materials being used.)

Model CSA - 626 Filter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack) 514-F071 - Disposable Filter Bag - (6 per pack) 514-AG097 - Chemical Filter Replacement 514-AB010 - Motor Brushes & Discharge Pad 514-AG128 - Pre-Filger Bag - (5 per pack) 514-F074 - HEPA Filter (Replacement of each filter will vary depending on materials being used.)

Model SPH - 835

Air Filters

Filtter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack) 514-F071 - Disposable Filter Bag - (6 per pack) 514-AG097 - Chemical Filter for SPH426 514-AB010 - Motor Brushes & Discharge Pad 514-F074 - HEPA Filter (Replacement of each filter will vary depending on materials being used.)

68


Services and Cut-to-Size Do you want to save time? Then order your Trotec materials individually precut to size. Dimensionally accurate, fast and cost-effective. We reliably meet your requirements, so that you can concentrate on what really matters.

Rounded corners

Bevelling

Holes

with a radius of 1/8”, 1/4”, 3/16”, or 1/2” in metal. Any radius in plastic.

Beveled edges with an angle of 45° (rounded corners at an additional charge).

of any diameter. Please order with a sketch, detailing the position of the hole above the center point.

Self-adhesive film Application of a double-sided adhesive film to the back of the material plates.

Longitudinal and transverse brush strokes The orientation of the brush strokes can be selected at the time of cutting.

Visit our website: www.troteclaser.com

Services

On request we can deliver your blanks on a base film, aligned along defined grid lines. As a result you do not have to insert and position your blanks individually and can engrave multiple plates in a single step. This saves valuable time spent handling materials. Pricing on request.

69


Metals

Services

Rotary Materials

70

x

x

x

TroLase Metallic Plus

x

x

x

x

TroLase Metallic

x

x

TroLase Reverse

x

x

TroGlas

x

Acrylic Sheets

Scores

x

Reverse engraving (optional colour fill)

2

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

TroLase ADA Signage

x

x

x

x

x

x

x

TroLase Thins

x

x

x

x

x

x

x

TroLase Textures

x

x

x

x

x

x

x

TroLase Lights

x

x

x

x

x

x

x

LaserFlex

x

x

x

x

1

Front

Interior

TroLase

Handling

3

Material

Exterior

Ply

Rotary Engraver

Use

Laser

Laserable Materials

Engraving

x

x

x

TroPly

x

x

x

TroPly Metallic Plus

x

x

x

x

x

TroPly Metallic

x

x

x

x

x

TroPly Satin

x

x

x

x

x

TroPly Ultra

x

x

x

x

x

x

TroPly Ultra Reverse

x

x

x

x

TroPly HiGloss

x

x

x

x

TroPly HiGloss Reverse

x

x

x

x

x

x

x

x

x

x

x

x

x

Anodized Aluminum

x

DuraBlack

x

Alumamark

x

Aluminum

S

Brass

x

x

x x

x

x

x

x

x

S

x

S

x

x

x

S

x

Steel and Nickel

x

x

x

x

S

x

Sublimation Aluminum

S

x

x

x

S

x

S - Some materials are in our product line. Please consult descriptions in the catalogue.

x x

x

x

x

x


Drills

Shear

Laser Cutting

Bevels

Heat Bend

Screen printing

Bonding

Hot Stamping

Material

x

x

x

x

x

x

x

x

x

TroLase

x

x

x

x

x

x

x

x

x

TroLase Metallic Plus

x

x

x

x

x

x

x

x

x

TroLase Metallic

x

x

x

x

x

x

x

x

TroLase Reverse

x

x

x

x

x

x

x

x

TroGlas

x

x

x

x

x

x

x

x

Acrylic Sheets

x

x

x

x

x

x

x

x

x

TroLase ADA Signage

x

x

x

x

x

x

x

TroLase Thins

x

x

x

x

x

TroLase Textures

x

x

x

x

x

TroLase Lights LaserFlex

x

x

x

x

x

x

x

x

TroPly

x

x

x

x

x

x

x

x

TroPly Metallic Plus

x

x

x

x

x

x

x

x

TroPly Metallic

x

x

x

x

x

x

x

x

TroPly Satin

x

x

x

x

x

x

x

x

x

TroPly Ultra

x

x

x

x

x

x

x

x

x

TroPly Ultra Reverse

x

x

x

x

x

x

x

x

TroPly HiGloss

x

x

x

x

x

x

x

x

TroPly HiGloss Reverse

x

x

x

x

x

x

x

x

x

x

DuraBlack

x

x

x

x

Alumamark

x

x

x

x

Aluminum

x

x

x

x

Brass

x

x

x

x

Steel and Nickel

x

x

x

x

Sublimation Aluminum

Anodized Aluminum

Services

Visit our website: www.troteclaser.com

Rotary Materials

x

x

Metals

x

x

Laserable Materials

Saw

ADA Compliant

Finishing

71


Showrooms & Training Facilities

We are proud to be able to train and service our customers across Canada. With four locations in Toronto, Montreal, Calgary and Vancouver, as well as numerous road shows in smaller cities, Trotec offers seminars and workshops nearly every month to clients and prospects. From laser applications to materials and software, find out more from a location near you.

8096 Trans Canada Highway Saint-Laurent, QC H4S 1M5

Suite 2 - 820, 28th Street N.E. Calgary, AB T2A 6K1

Suite 705-20381, 62nd Ave. Langley, BC V3A 5E6

Call 1-800-663-1149

All locations are full-service with on-site technicians

/TrotecLaserCanada /TrotecLaserCanada

Visit our website: www.troteclaser.com

Showrooms & Training

Unit 5 - 1705 Argentia Road Mississauga, ON L5N 3A9

Profile for Stefanie Pilz

Materials Catalogue - Canada  

Materials Catalogue - Canada  

Advertisement