Issuu on Google+

ORNAMENTAL IRON

DIVISION


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

SPEARS AND CAPS

18

6

SPO 656 H. 5-1/2” X W. 3-1/2” BASE: 1”OD 1/2” ID SQUARE .6 LBS.

SPO 656-XS H. 5” X W. 3-1/82” BASE: 7/8”OD 1/2” ID SQUARE .5 LBS.

SPO 659 H. 5” X W. 3-1/4” BASE: 1”OD 1/2” ID SQUARE .5 LBS.

SPO 659-XS H. 4-1/2” X W. 2-3/4” BASE: 1”OD 1/2” ID SQUARE .33 LBS.

SPO 9-RS H. 3-7/8” BASE: 7/8”OD 1/2” ID ROUND .25 LBS.

SPO 9-X H. 4-1/4” BASE: 1”OD 1/2” ID SQUARE .33 LBS.

SPO 9-A H. 4-3/8” BASE: 1”OD 1/2” ID SQUARE .33 LBS.

SPO 9-AXS H. 4” BASE: 1”OD 1/2” ID SQUARE .25 LBS.

SPO 9-XS H. 3-1/2” BASE: 1”OD 1/2” ID SQUARE .25 LBS.

SPO 649-XS H. 4” X W. 22” BASE: 1/2”OD 1/2” ID SQUARE .336 LBS.

SPO 649 H. 4-3/8” X W. 2-1/4” BASE: 1/2”OD 1/2”ID SQUARE .33 LBS.

SPO 658 H. 4-1/4” X W. 2-1/2” BASE: 1”OD PLUG: 3/8” X 5/8” .33 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 9-H H. 4-5/8” BASE: 1-1/8”OD 5/8” ID SQUARE .33 LBS.

SPO 217WB-Y H. 4-1/8” BASE: 1-1/16”OD 3/4” ID SQUARE .33 LBS.

SPO 667 H. 4-1/2” X W. 2-1/4” BASE: 1”OD 1/2” ID SQUARE .5 LBS.

SPO 667-XS H. 4” X W. 2-1/4” BASE: 1”OD 1/2” ID SQUARE .25 LBS.

SPO 668 H. 7-1/4 x W. 3” BASE: 1“ OD 1/2” ID Square .75 LBS.

SPO 825-Lance H. 4-3/4” BASE: 1-1/4“ OD 1/2” ID SQUARE .5 LBS.

SPO 649-H H. 4-3/4” X W. 2-1/4“ BASE: 1”OD 5/8” ID SQUARE .5 LBS.

SPO 844 H. 5-1/4” X W. 2-1/4“ BASE: 1/2” SOLID SQUARE .5 LBS.

SPO 853 H. 4-5/8” X W. 2-1/2“” BASE: 1-1/4”OD 1/2” ID SQUARE .5 LBS.

SPO 666-XS H. 5-1/4” X W. 2-3/8” BASE: 1-1/4”OD 1/2” ID SQUARE .5 LBS.

SPO 656-H H. 6” X W. 3-1/2” BASE: 1”OD 5/8” ID SQUARE .75 LBS.

SPO 848 H. 7-3/4” X W. 4-5/8” BASE: 1/2” ID SQUARE .2 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

7

© 2010 STEEL AND PIPES, INC.

SPEARS AND CAPS

18


ORNAMENTAL IRON DIVISION

SPEARS AND CAPS

18

SPO 666 H. 6” X W. 2-3/4“ .5 LBS. ALLOW FOR FLUSH KIT OF ...

© 2010 STEEL AND PIPES, INC.

SPO 9-RXL H. 5-1/4” X W. 2-1/2“ BASE: 3/4” ID ROUND .75 LBS.

SPO 8603 H. 4-1/4” X W. 2“ BASE: 1/2” ID ROUND .3 LBS.

8

SPO 9-R H. 4” X W. 1-3/4“ BASE: 3/4”OD 1/2” ID ROUND .33 LBS.

SPO 655-A H. 6-1/2” X W. 3-1/2” BASE: 1”OD 1/2” ID SQUARE 1 LBS.

SPO 8834 H. 6” X W. 3-1/24” BASE: 1-1/2”OD 3/4” ID ROUND 1.25 LBS.

SPO 649-Y H. 5-1/2” BASE: 1” OD 3/4” ID SQUARE .75 LBS.

SPO 9S SQUARE HOLLOW BASE FIT INSIDE SQUARE TUBE OF 1”

SPO 7-AXL 2” DIAMETER BALL H. 3-1/4” BASE: 1-3/4” SOLID 1.75 LBS.

SPO 812 H. 2” X W. 1“ BASE: 1”OD 1/2” ID SQUARE .25 LBS.

SPO 853-Y LEUR-DE-LIS H. 6-5/8” X W. 3-3/4” BASE: 2”OD 3/4”ID SQUARE 2 LBS.

SPO 8280 4 SIDED H. 5-3/8” PLUG 1-3/4” X 5/8” DEEP BASE: 1” 4 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 656-Y H. 7” X W. 4-1/4“ BASE: 1” OD 3/4” ID SQUARE 1.5 LBS.

SPO 832 SQUARE HOLLOW BASE FIT INSIDE SQUARE TUBE OF 1”

SPO 659-H H. 5-3/8” X W. 3-1/4” BASE: 1” OD 5/8” ID SQUARE 1 LBS.

SPO 671-AF H. 5” X W. 2” BASE: 1-1/4” OD 3/4” ID SQUARE 1 LBS.

SPO 647-SPEAR H. 5” X W. 2-1/4“ BASE: 5/8” SOLID .33 LBS.

SPO 9-XS-3/4 H. 4-1/4” BASE: 1-1/4” OD 3/4” ID SQUARE .33 LBS.

SPO 9-Y H. 6” BASE: 1-1/4“ OD 3/8” ID SQUARE 1.25 LBS.

SPO 661 4 SIDED ARROW POINT H. 4-1/4” PLUG: 1” X 1” DEEP .75 LBS.

SPO 9-Z 4 SIDED FLARE WITH BALL H. 8” BASE: 1-3/4“ OD 1”ID SQUARE 1.5 LBS.

SPO 7-BALL 1-1/2” DIAMETER BALL H. 2-1/2” BASE: 1“ SOLID SQUARE .75 LBS.

SPO 8-X H. 3” BASE: 1” SOLID .5 LBS.

SPO 649-X H. 4-1/4” PLUG: 1“ X 3/4” DEEP .75 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

9

© 2010 STEEL AND PIPES, INC.

SPEARS AND CAPS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

SPEARS AND CAPS

18

SPO 7-X 1” DIAMETER BALL H. 2-1/4 PLUG: 1“ X 3/4” DEEP .5 LBS.

SPO 117 LEMON DROP H. 3-1/4” PLUG: 1” X 1/4” DEEP 1 LBS.

SPO 8124 H. 2-1/4” X W. 1-1/4” BASE: 3/4“ SQUARE .5 LBS.

SPO STAR H. 3-1/2” X W. 1-1/4” OH PLUG. 1” X 1/2” DEEP OD 1 LBS.

SPO 7-A 1-1/2” DIAMETER BALL H. 2-1/2” BASE: 1-1/4” SOLID SQUARE .75 LBS.

SPO 812Z H. 2-1/2” X W. 1-1/2” BASE: 1” ID SQUARE .75 LBS.

SPO 7-XL 1-1/2” DIAMETER BALL H. 3-3/4” PLUG: 1-1/4” X 1-1/4” DEEP 1.25 LBS.

SPO 9-XL H. 6” X W. 2” BASE: 2-1/8”OD 1-1/4” ID SQUARE 1.75 LBS.

SPO 669 TASSEL SPEAR H. 8” BASE: 1” SQUARE 2 LBS.

SPO 670-CFY W. 4” X 6-5/8” OH PLUG: 3/4” X 1-3/8” DEEP 1 LBS.

SPO 649-Z H. 6-1/4” X W. 3-1/4” BASE: 1-3/4”OD 1” ID SQUARE 1.25 LBS.

SPO 120 NEWEL POST BALL 2” DIAMETER BALL H. 5-1/2” BASE: FITS OVER 3” TUBING 4 LBS.

10

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPEARS AND CAPS

18

SPO 119 SPO 118 NEWEL POST BALL NEWEL POST BALL 2-3/4” DIAMETER BALL 1-3/4” DIAMETER BALL H. 5-1/2” H. 3-3/4” BASE: FITS OVER 4” TUBING BASE: FITS OVER 2” TUBING 4 LBS. 2 LBS.

SPO 126 NEWEL POST BALL CAP BASE: 6” X 6” TUBING

SPO 657-Z H. 6” 4” SOLID BASE 8 LBS.

1”

1”

SPO 657 PINEAPPLE H. 4” X W. 2-1/2” BASE: 1-3/4” SOLID 1.5 LBS.

SPO 8805 H. 12” X W. 6” BASE: 3-1/2” X 5” OD 2-3/4” X 4-1/8” ID 7 LBS.

SPO 662 H. 8” X W. 2-3/4” FITS OVER 1” .75 LBS.

SPO 671 XL H. 8” X W. 1-1/2”

210.020 .1515 210.020 .01X1 210.020 .02X2 210.020 .04X4 210.020 .06X6

1/2”X1/2” 1”X1” 2”X2” 4”X4” 6”X6”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

11

© 2010 STEEL AND PIPES, INC.

CAST IRON CAPS


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

COLLARS AND BASES

18

SPO 251 FITS OVER 1/2” H. 2” X W. 1-3/4” 1/3 LBS.

SPO 251-H FITS OVER 5/8” H. 2” X W. 1-7/8” 1/3 LBS.

SPO 251-Y FITS OVER 3/4” H. 2” X W. 2” 1/2 LBS.

SPO 251-Z FITS OVER 1” H. 2.5” X W. 2.5” .75 LBS

SPO 8393 H. 9-1/2” 9-1/4”OD 48 LBS. FITS OVER 6”

SPO 8394 H. 8” 12”OD 48 LBS. FITS OVER 6”

SPO 8396 COLLAR H. 6” X W. 4-1/2” 7 LBS. FITS OVER 3” ROUND

SPO 8397 BASE H. 8-1/2” X W. 6” 17 LBS. FITS OVER 3” ROUND

SPO 8518 COLLAR FOR 1/2” .7 LBS.

SPO KK2 5” X 5” FOR 2”

SPO 9503 FOR 1/2”

SPO SS 1/2

12

SPO 234-112 FITS 1-1/2” SQ. OVER 3” BASE PLATE .85 LBS.

SPO LCS-250 BASE PLATES 3” X 3” FOR 1”

SPO 251 H HEX SPO 251 HEX SPO 251 Z HEX

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

FITS OVER 5/8” SQ. FITS OVER 1/2” SQ. FITS OVER 5/8” SQ.


ORNAMENTAL IRON DIVISION

SPO CC COLLAR 2” DEEP BASE: 3.25” X 3.25” 1.5 LBS. FOR 1” TUBING

SPO BB COLLAR 1-3/8” DEEP BASE: 2-1/4” X 2-1/4” 1/2 LBS. FOR 1” TUBING

SPO RR COLLAR 1.25” DEEP BASE: 2-1/2” X 2-1/2” 1/2 LBS. FOR 1.25” TUBING

SPO HH COLLAR 2” DEEP BASE: 3-3/4” X 3-3/4” 1-3/4 LBS. FOR 1.5” TUBING

SPO EE COLLAR 1” DEEP BASE: 1-1/4” X 2-1/4” 1/4 LBS. FOR .5” SQUARE

SPO MM COLLAR 1-1/2” DEEP BASE: 1-5/8” X 3-7/8” 1/2 LBS. FOR 1” TUBING

SPO FF SHANK 1-1/4” DEEP BASE: 1-1/4” X 3” 1/4” LBS. FOR 1” TUBING

SPO XX SHANK 1” DEEP BASE: 1-1/8” X 2” 1/4 LBS. FOR 1” TUBING

SPO DD COLLAR 1-7/8” DEEP BASE: 1” X 1” 1/2 LBS. FOR 1” TUBING

SPO LL COLLAR 1-3/8” DEEP BASE: 1-5/8” X 2-3/4” 1/2 LBS. FOR 1” TUBING

SPO QQ COLLAR 2” DEEP BASE: 2-1/4” X 3-3/8” 1/3” LBS. FOR 1” TUBING

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

13

© 2010 STEEL AND PIPES, INC.

SHOES, BASES & FLANGES

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

14

SPO 85 BIRD OF PARADISE H. 24-3/4” X W. 8-1/8” 11.3 LBS.

SPO 1327 H. 33-1/4” X W. 8” 13 LBS.

SPO 82 BIRD OF PARADISE H. 22” X W. 8-1/2” 11 LBS.

SPO 81 H. 15.5” X W. 8.5” 7.5 LBS.

SPO 1325 H. 28-1/4” X W. 8” 9 LBS.

SPO 87A H. 27” X W. 9” 12 LBS.

SPO 1335 H. 33-1/4” X W. 8-3/4” 13.5 LBS.

SPO 1337 H. 33-1/4” X W. 8-3/4” 13.5 LBS.

SPO 84 H. 32” X W. 6-1/4” 10 LBS.

SPO 65X H. 27-3/4” X W. 7-3/4” 10 LBS.

SPO 65 H. 19-1/2” X W. 7” 6 LBS.

SPO 625 H. 30-1/2” X W. 8-5/8” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SPO 67 PONTALBA H. 28-1/2” X W. 8-1/4” 8.5 LBS.

ORNAMENTAL IRON DIVISION

SPO 7163 H. 26-7/8” X W. 6-1/4”

SPO 86 H. 26-1/2” X W. 10” 9 LBS.

SPO 630 H. 30” X W. 8” 10 LBS.

SPO 610 H. 28-5/8” X W. 7-5/8” 9.5 LBS.

SPO 6357 H. 28-1/2” X W. 9-1/4”

SPO 1345 H. 33-1/4” X W. 5” 10 LBS.

SPO 1300 H. 33-1/4” X W. 5” 8.75 LBS.

SPO 44 H. 31-1/2” X W. 6-1/4” 5.5 LBS.

SPO 96F PASSION FLOWER DESIGN H. 24-1/2” X W. 6-3/4” 8 LBS.

SPO 88 H. 30-3/8” X W. 8-1/4” 9 LBS.

SPO 7153 H. 23-1/2” X W. 15-1/8”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

15

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

16

SPO 150 WEDDING RING DESIGN H. 19-1/4” X W. 7-1/4” 4 LBS.

SPO 632 H. 23-3/4” X W. 11-1/2” 13 LBS.

SPO 680 H. 10” X W. 22” 6 LBS.

SPO 624 H. 28-1/4” X W. 11” 18 LBS.

SPO 675 H. 22” X W. 8” 8 LBS.

SPO 6028 H. 27-3/4” X W. 12” 14 LBS.

SPO 640 H. 27-1/2” X W. 7-1/2” 8 LBS.

SPO 9612 H. 27-1/4” X W. 6-3/4” 7 LBS.

SPO 6026 H. 22-3/4” X W. 8” 7 LBS.

SPO 9611 H. 28-3/4” X W. 11-3/4” 14 LBS.

SPO 9610(SBO) H. 29.5” X W. 9.5” 8.8 LBS

SPO 9600 H. 29-3/8” X W. 11” 24 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 7615 H. 27-5/8” X W. 4-5/8” 7 LBS.

SPO 7614 H. 27-5/8” X W. 4-5/8” 7 LBS.

SPO 9644 H. 29” X W. 3-1/2” 8 LBS.

SPO 9643 H. 29” X W. 3-1/2” 8 LBS.

SPO 89-A H. 29-3/4” X W. 4” 7 LBS.

SPO 8307 H. 28” X W. 2-1/2” 7 LBS.

SPO 8305 H. 31-1/4” X W. 2-1/4” 7.5 LBS.

SPO 9091 H. 28-1/2” X W. 5” 7.5 LBS.

SPO 9617 H. 28-1/4” X W. 7” 7 LBS.

SPO 58 23” X 20-1/4” 11 LBS.

SPO 56 17” X 16.25” 7 LBS.

SPO 852 14-1/4” X 17-3/4” 6 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

17

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

18

SPO 98B 14” X 14” 6 LBS.

SPO 98C 16” X 16” 8 LBS.

SPO 6027 17-3/4” X 17-3/4” 10 LBS.

SPO 16 9” X 17” 3.5 LBS.

SPO 10 21” X 21” 13 LBS.

SPO 10A 15-1/2” X 15-1/2” 5 LBS.

SPO 21 26-1/2” X 26-1/2” 20 LBS.

SPO 20A 21” X 21” 9 LBS.

SPO 28 21” X 21” 9 LBS.

SPO 222-B 16” X 16” 9.5 LBS.

SPO 41 9” X 17” 3.5 LBS.

SPO 96A 17” X 17” 7 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 80A 12” X 24-3/4” 13.5 LBS.

SPO 80B 21” X 21” 13 LBS.

SPO 80C 15-1/2” X 15-1/2” 8 LBS.

SPO 75B 16” X 16” 6.5 LBS.

SPO 70 9-3/4” X W. 18-3/4” 6.5 LBS.

SPO 74B 14-1/2” X 14-1/2” 5.5 LBS.

SPO 74-X 18” X 18” 8 LBS.

SPO 74A 16-1/2” X 16-1/2” 12.5 LBS.

SPO 40A 16” X 16” 5.5 LBS.

SPO 50 18-1/2” X 17-3/4” 10 LBS.

SPO 60 17” X 17” 7.5 LBS.

SPO 90 15” X 22-1/4” 6.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

19

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION

CAST IRON DESIGNS

18

SPO 79 H. 2-3/4” X W. 19” 3 LBS.

SPO 96D H. 4-3/4” X W. 19-1/2” 5 LBS.

SPO 96X H. 7-1/4” X W. 23-1/2” 9 LBS.

SPO 850 H. 4-1/2” X W. 19” 3 LBS.

SPO 9049 H. 7-3/4” X W. 30-1/2” 12 LBS.

SPO 9040 H. 6-3/8” X W. 31-1/4” 9.25 LBS.

SPO 62-X H. 6” X W. 23” 5.5 LBS.

SPO 27A H. 4-1/4” X W. 23-1/4” 5.5 LBS.

SPO 15A H. 6” X W. 26” 7 LBS.

SPO 80F H. 5” X W. 21-1/2” 6 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 229 H. 8” X W. 11”

SPO 220 H. 4-1/4” X W. 12-1/4”

20

SPO 24 H. 2-3/4” X W. 20-1/4” 4 LBS.

SPO 173 H. 7-1/2” X W.35-1/2”

SPO 163 H. 6-1/4” X W. 34-1/4”

SPO 83 H. 36-3/4” X W. 11-1/4” 16 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 8363-R H. 30-3/4” X W. 19” 35 LBS.

SPO 8503 H. 29” X W. 9-1/2” 14 LBS.

SPO 93 H. 23-1/4” X W. 9-1/4” 7.5 LBS.

SPO 7314 H. 14-1/8” X W. 3-7/8” 4 LBS..

SPO 68 H. 19” X W. 6” 7 LBS.

SPO 38 H. 15” X W. 10.5” 3.5 LBS.

SPO 38X H. 18-3/4” X W. 10-1/2” 5.5 LBS.

SPO 38XL H.24.25” X W.9.75” 9.5 LBS.

SPO 238 H. 19” X W. 9-1/2”

SPO 8325 10.5 DIAMETER 9.5 LBS.

SPO 708 H. 20-1/4” X W. 11-1/4” 18 LBS.

SPO 648 H. 27-5/8” X W. 15-1/2” 20 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

21

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

22

SPO 75 H. 27” X W. 7-7/8” 10 LBS.

SPO 78-A H. 25.5” X W. 8” 9.5 LBS.

SPO 74-C H. 28.25” X W. 8-5/8” 11 LBS.

SPO 79-C H. 25.75” X W. 10.25” 12 LBS.

SPO 79-A H. 21.75” X W. 7” 5 LBS.

SPO 7446 H. 34” X W. 5-1/2” 9 LBS.

SPO 7463 H. 31-1/2” X W. 6-3/4” 9 LBS.

SPO 7462 H. 29” X W. 6-3/4” 9 LBS.

SPO 89 H. 27-3/4” X W. 6” 10 LBS.

SPO 87 H. 29-1/2” X W. 6” 10 LBS.

SPO 89XL H. 30” X W. 6-5/8” 12 LBS.

SPO 8653(SF) H. 38.5” X W. 34.75” 42.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 693 H. 29-1/2” X W. 5-1/2” 8 LBS.

SPO 9628 H. 22-1/2” X W. 10-1/4” 9 LBS.

SPO 7519 H. 26.5” X W. 18” 33 LBS.

SPO 685-XS H. 20-1/4” X W. 13-1/2” 15 LBS.

SPO 685 H. 22-1/2” X W. 10” 9 LBS.

SPO 645 H. 26” X W. 10-1/4” 10 LBS.

SPO 631 H. 28-1/2” X W. 11-1/4” 15 LBS.

SPO 644 H. 23-1/2” X W. 9” 12 LBS.

SPO 9019 H. 26-1/4” X W. 11-1/2” 15.5 LBS.

SPO 13B H. 22” X W. 9” 5.5 LBS.

SPO 8502 H. 21” X W. 18.5” 15.5 LBS.

SPO 618 23” X 23” 14 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

23

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

24

SPO 619 17.5” DIAMETER 9 LBS.

SPO 9056 H. 28” X W. 12” 13 LBS.

SPO 9044 H. 26.75” X W. 16” 14.75 LBS.

SPO 697 H. 27.5” X W. 11” 10 LBS.

SPO 45A H. 26.25” X W. 8.5” 7.5 LBS.

SPO 856 H. 31” X W. 8.25” 7.5 LBS.

SPO 854 H. 19.25” X W. 7.75” 4.5 LBS.

SPO 858 H. 15.75” X W. 8.5” 3.5 LBS.

SPO 41 9” X 17” 3.5 LBS.

SPO 43 H. 18.5” X W. 8” 4.5 LBS.

SPO 46 H. 7.25” X W. 6.25” 1 LBS.

SPO 96 H. 17.5” X W. 8.5” 6 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 71 H. 27.25” X W. 10.75” 12 LBS.

SPO 98 H. 29” X W. 8” 9 LBS.

SPO 54 H. 30” X W. 10” 12 LBS.

SPO 74 H. 14.5” X W. 9” 5.5 LBS.

SPO 688 8.5” DIAMETER 5 LBS.

SPO 9021 H. 33.25” X W. 7.25” 10 LBS.

SPO 29 H. 27.25” X W. 8” 10 LBS.

SPO 222-AXL H. 27” X W. 8.5” 11 LBS.

SPO L424 H. 27.25” X W. 12” 18 LBS.

SPO 24-A H. 26” X W. 11-5/8” 12 LBS.

SPO L423 H. 20.5” X W. 8.25” 8 LBS.

SPO 22-A H. 21” X W. 8” 6 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

25

© 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

CAST IRON DESIGNS

18

26

SPO L411 H. 16.75” X W. 12.75” 10 LBS.

SPO 606 H. 24” X W. 10-1/2” 8.5 LBS.

SPO 6239 H. 14-3/4” X W. 14-3/4” 5 LBS.

SPO 64 H. 15-7/8” X W. 10-1/4” 3.5 LBS.

SPO 9043 H. 26-3/4” X W. 16” 16.25 LBS.

SPO 94 H. 16” X W. 8” 4 LBS.

SPO 20 22” X 22” 13 LBS.

SPO 22 H. 20-1/4” X W. 8” 6.5 LBS.

SPO 23A H. 16” X W. 16” 8.5 LBS.

SPO 27 H. 7-1/2” X W. 23-1/4” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

CIRCLE DESIGNS

18

SPO 8325 10-1/2” DIAMETER 9 LBS.

SPO 618(SF) 23” X 23” 14 LBS.

SPO 7510(SF) 15” DIAMETER 13 LBS.

SPO 14-XL(SF) 20” DIAMETER 18 LBS.

29”

SPO 618-A(SF) 3 LBS.

SPO 617(SF) 22-1/4” DIAMETER 27 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

27

© 2010 STEEL AND PIPES, INC.

21”

SPO 619(SBO) 17-1/2” DIAMETER 9 LBS.


ORNAMENTAL IRON DIVISION

OAK DESIGNS

18

SPO 222-B H. 16” X W. 16” 9.5 LBS.

SPO 222-A H. 15” X W. 9” 6.5 LBS.

SPO 8659 H. 33-1/4” X W. 9-1/8” FLAGE - 1/4” X 1” 20 LBS.

© 2010 STEEL AND PIPES, INC.

XL(SF) METER BS.

SPO 222-AXL H. 27” X W. 8-1/2” 11 LBS.

28

SPO 29 H. 27-1/4” X W. 8” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

ROSE DESIGNS

18

SPO 74-B H. 14-1/2” X W. 14-1/2” 5.5 LBS.

SPO 76 H. 17-3/4” X W. 8” 5 LBS.

SPO 79-B H. 21-3/4” X W. 7” 5 LBS.

SPO 76-S H. 12-1/4” X W. 8-1/4” 4 LBS.

SPO 75-A H. 21-1/2” X W. 21-1/2” 13 LBS.

SPO 688(SF) 8-1/2” DIAMETER 5 LBS.

SPO 79-C H. 25-3/4” X W. 10-1/4” 12 LBS.

SPO 78-A H. 25-1/2” X W. 8” 9.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

29

© 2010 STEEL AND PIPES, INC.

SPO 75-B H. 16” X W. 16” 6.5 LBS.

SPO 71 H. 14-1/2” X W. 10-3/4” 12 LBS.


ORNAMENTAL IRON DIVISION

ROSE DESIGNS

18

SPO 74-X H. 18” X W. 18” 8 LBS.

SPO 70 H. 9-3/4” X W.18-3/4” 6.5 LBS.

SPO 74-A H. 16-1/2” X W. 16-1/2” 12.5 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 79 H. 2-3/4” X W. 19” 3 LBS.

SPO 74 H. 14-1/2” X W. 9” 5.5 LBS.

30

SPO 74-C H. 28-1/4” X W. 8-5/8” 11 LBS.

SPO 75 H. 27” X W. 7-7/8” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

PASSION FLOWER DESIGNS

18

SPO 96-X(SBO) H. 7-1/4” X W. 23-1/2” 9 LBS.

SPO 96-D(SBO) H. 4-3/4” X W. 19-1/2” 5 LBS.

SPO 50 H. 17-3/4” X W. 18-1/2” 10 LBS.

SPO 96-F H. 24-1/2” X W. 6-3/4” 8 LBS.

SPO 96(SBO) H. 17-1/2” X W. 8-1/2” 6 LBS..

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

31

© 2010 STEEL AND PIPES, INC.

SPO 9047 H. 30” X W. 7-1/4”

SPO 96-C(SBO) H. 27-1/4” X W. 12” 15 LBS.


ORNAMENTAL IRON DIVISION

VINEYARD DESIGNS

18

14-1/2”

16-1/2”

SPO 18 H. 21-1/4” X W. 31” 15 LBS. SPO 13 H. 29” X W. 8” 10 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 10 H. 21” X W. 21” 13 LBS.

SPO 15A H. 6” X W. 26”

SPO 17 H. 29” X W. 7-3/8” 10 LBS.

32

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

VINEYARD DESIGNS

18

SPO 19 H. 15-1/2” X W. 8” 5.5 LBS.

SPO 11 H. 22” X W. 7-1/2” 6.5 LBS..

SPO 11-X H. 24-1/8” X W. 6-1/4” 8 LBS.

SPO 10-A H. 15-1/2” X W. 15-1/2” 5 LBS.

SPO 12 H. 28” X W. 7-1/2” 9 LBS.

SPO 13B H. 22” X W. 9” 10.5 LBS.

SPO 100(SBO) H. 12-1/2” X W. 31” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

33

© 2010 STEEL AND PIPES, INC.

SPO 16 H. 9” X W 17” 3.5 LBS


ORNAMENTAL IRON DIVISION

BIRD PANELS SERIES

18

16”

12-1/2”

SPO 80 H. 21-1/2” X W. 28-1/2” 18 LBS.

SPO 80-A H. 12” X W. 24-3/4” 13.5 LBS.

SPO 82 H. 22” X W. 8-1/2” 11 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 85 H. 24-3/4” X W. 8-1/8” 11.3 LBS.

SPO 81 H. 15-1/2” X W. 8-1/2” 7.5 LBS.

34

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

PONTALBA PANELS SERIES

18

SPO 62-XL H. 3-1/2” X LENGTH 31-3/4” 4.5 LBS.

SPO 62-X H. 6” X LENGTH 23” 5.5 LBS.

SPO 65 H. 19-1/2” X W. 7” 6 LBS.

SPO 80-B H. 21” X W. 21” 13 LBS.

SPO 80-F H. 5” X W. 21-1/2” 6 LBS.

SPO 67(SF) H. 28-1/2” X W. 8-1/4” 8.5 LBS

SPO 80-C H. 15-1/2” X W. 15-1/2” 8 LBS.

SPO 65-X H. 27-3/4” X W. 7-3/8” 10 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

35

© 2010 STEEL AND PIPES, INC.

SPO 60 H. 17” X W. 17” 7-1/2 LBS.


ORNAMENTAL IRON DIVISION

BELL FLOWER DESIGNS

18

SPO 40-A H. 16” X W. 16” 5.5 LBS.

SPO 46 H. 6-1/4” X W. 7-1/4” 1 LBS.

© 2010 STEEL AND PIPES, INC.

MORNING GLORY DESIGNS

36

SPO 58 H. 20-1/4” X W.23” 11 LBS.

SPO 56 H. 17” X W. 16-1/4” 7 LBS.

SPO 54 H. 30” X W. 10” 12 LBS.

SPO 55 H. 30-3/4” X W. 6” 7 LBS.

SPO 44 H. 31-1/2” X W. 6-1/4” 5.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

IVY LEAF DESIGNS

18

SPO 858 H. 15-3/4” X W. 8-1/2” 3.5 LBS.

SPO 852 H. 14-1/4” X W. 17-3/4” 5.5 LBS.

SPO 856 H. 31” X W. 8-1/4” 7.5 LBS.

SPO 850 H. 4-1/2” X W. 19” 3 LBS.

DOGWOOD DESIGNS

SPO 854 H. 19-1/4” X W. 7-3/4” 4.5 LBS.

SPO 45-A H. 27-1/4” X W. 8-1/2” 7.5 LBS.

SPO 43 H. 18-1/2” X W. 8” 4.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

37

© 2010 STEEL AND PIPES, INC.

SPO 41 H. 9” X W. 17” 3.5 LBS.


ORNAMENTAL IRON DIVISION

SUNFLOWER AND MAGNOLIA DESIGNS

18

SPO 98-C H. 16” X W. 16” 8 LBS. SPO 98 H. 29” X W. 8” 9 LBS.

SPO 97-A H. 8-1/2” X W. 30-1/2” SPO 98-B H. 14” X W. 14” 6 LBS.

© 2010 STEEL AND PIPES, INC.

MODERN DESIGNS

SPO 694(SF) H. 28-3/8” X W. 6-1/4” 3.5 LBS. 38

SPO 624 H. 28-1/4” X W. 11” 18 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

MODERN DESIGNS

18

SPO 648 H. 27-5/8” X W. 15-1/2” 20 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

39

© 2010 STEEL AND PIPES, INC.

SPO 88 H. 30-3/8” X W. 8-1/4” 9 LBS

SPO 88-XL H. 35” X W. 9-1/4” 10 LBS.


ORNAMENTAL IRON DIVISION

MODERN DESIGNS

18

SPO 631(SF) H. 28-1/2” X W. 11-1/4” 15 LBS.

SPO 150-B H. 14-5/8” SQUARE 4 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 150 H. 19-1/4” X W. 7-1/4” 4 LBS

40

SPO 63 H. 21-1/2” X W. 9-1/2” 3 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SPO 689(SF) H. 26-1/2” X W. 7” 5.5 LBS.

ORNAMENTAL IRON DIVISION

MODERN DESIGNS

18

SPO 632 H. 23-3/4” X W. 11-1/2” 13 LBS.

SPO 630 H. 30” X W. 8” 10 LBS.

SPO 635 H. 20” X W. 20” 12 LBS.

SPO 610 H. 28-5/8” X W. 7-5/8” 9.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

41

© 2010 STEEL AND PIPES, INC.

SPO 625 H. 30-1/2” X W. 8-5/8” 10 LBS.


ORNAMENTAL IRON DIVISION

RAILING DESIGNS

18

SPO 8307 H. 28” X W. 2-1/2” 7 LBS.

SPO 8304 LENGTH 35-3/8” BASE 1-1/2” - TOP 7/8” 12-1/2 LBS.

SPO 8305 LENGTH 31-1/4” OVAL BASE 1” X 2-1/4” TOP OVAL 1/2” X 1-1/2” 7-1/2 LBS.

SPO 621 LENGTH 29” CENTER WIDTH 5-3/4” 5/8” SOLID ENDS 5 LBS.

SPO 7618 LENGTH 36-1/2” 1-1/4” ENDS 11 LBS.

SPO 89-A H. 29-3/4 X W. 4” 7 LBS.

SPO 8306 LENGTH 26” WITH AT TOP AND BOTTOM 7-1/2” 6 LBS.

SPO 89XL H. 30” W. 6-5/8” 12 LBS

5”

2-1/2”

© 2010 STEEL AND PIPES, INC.

15”

SPO 89-B LENGTH 32-1/2” 1” ENDS 11 LBS.

42

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

RAILING DESIGNS

18

SPO 89 H. 27-3/4” X W. 6” 10 LBS.

SPO 87 H. 29-1/2” X W. 6” 10 LBS. SPO 87 H. 29-1/2” X W. 6” 10 LBS.

6-1/2” 3/4”

26-3/4”

3/4”

SPO 83 H. 36-3/4” X W. 11-1/4” 16 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

43

© 2010 STEEL AND PIPES, INC.

2”


ORNAMENTAL IRON DIVISION

RAILING DESIGNS

18

SPO 7462 H. 29” X W. 6-3/4” 9 LBS.

SPO 7463 H. 31-1/2” X W. 6-3/4” 9 LBS.

SPO 693(SF) H. 29-1/2” X W. 5-1/2” 8 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 80-C H. 15-1/2” X W. 15-1/2” 8 LBS.

SPO 644 H. 23-1/2” X W. 9” 12 LBS.

44

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

SPO 67-XL H. 30-3/4” x W. 7-3/4” 9-1/2 lbs.

SPO 87-A H. 27” X W. 9” 12 LBS


ORNAMENTAL IRON DIVISION

RAILING DESIGNS

18

SPO 645 H. 26” X W. 10-1/4” 10 LBS.

SPO 640 H. 27-1/2” X W. 7-1/2” 8 LBS.

SPO 84 H. 32” X W. 6-1/4” 10 LBS. SPO 692(SBO) H. 29-1/2” X W. 11-1/2” 11 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

45

© 2010 STEEL AND PIPES, INC.

SPO 7446 H. 34” X W. 5-1/2” 9 LBS.


ORNAMENTAL IRON DIVISION

RAILING DESIGNS

18

SPO 8502 H. 21” X W. 18-1/2” 15.5 LBS.

SPO 7153 H. 23-1/2” X W. 15-1/8”

© 2010 STEEL AND PIPES, INC.

SPO 8658(SF) H. 26” X W. 14-1/2” 20 LBS.

SPO 86 H. 26-1/2” X W. 10” 9 LBS.

46

SPO 680(SF) H. 10” X W. 22” 6 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 62XL H. 31-5/8” X W. 3-1/2” 4.5 LBS.

SPO 1345 H. 33-1/4” X W. 5” 10 LBS.

SPO A-2 H. 25-5/8” X W. 4-1/8” 5 LBS.

SPO A-3 H. 31-5/8” X W. 4-1/8” 6.5 LBS.

SPO 1310 H. 33-1/4” X W. 9-3/4” 15 LBS.

SPO 1305 H. 33-1/4” X W. 7-3/4” 15 LBS.

SPO 1337 H. 33-1/4” X W. 8-3/4” 13.5 LBS.

SPO 1335 H. 33-1/4” X W. 8-3/4” 13.5 LBS.”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

47

© 2010 STEEL AND PIPES, INC.

METAL CASTING DESIGNS

18


ORNAMENTAL IRON DIVISION

METAL CASTING DESIGNS

18

SPO 9020 H. 5.5” X W. 21” 8.5 LBS.

SPO 66-S H. 7” X W. 13”

SPO A-2 H. 4-1/8” X W. 25-5/8” 5 LBS.

SPO 8311 H. 5-1/2” X W. 12-3/4” 3 LBS.

SPO A-3 H. 4-1/8” X W. 31-5/8” 6-1/2 LBS.

SPO 7314 H. 3-7/8” X W. 14-1/8” 4 LBS.

© 2010 STEEL AND PIPES, INC.

SPO 5210-DX H. 4” X W. 21-1/2” 5 LBS.

SPO 697 H. 27-1/2” X W. 11” 10 LBS.

48

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

METAL CASTING DESIGNS

18

SPO 7515 H. 22-3/4” X W. 20” 27 LBS.

SPO 8363-R(SBO) H. 30-3/4” X W. 19” 35 LBS.

SPO 8503(SBO) H. 29” X W. 9-1/2” 14 LBS.

SPO 708(SF) H. 11-1/4” X W. 20-1/4” 18 LBS.

SPO 685XS H. 13-1/2” X W. 20-1/4” 15 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

49

© 2010 STEEL AND PIPES, INC.

GRILLS DESIGNS


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

MODERN DESIGNS

18

50

SPO 679 H. 4” X W. 4” 3/4 LBS.

SPO 143 H. 4-3/4” X W. 4-3/4” 3/4 LBS.

SPO 147-XS H. 4” X W. 5-3/4” 1 LBS.

SPO 639 H. 8” X W. 3” 1-1/2 LBS.

SPO 31-XL H. 10-1/4” X W. 8-1/2” 3 LBS.

SPO 31 H. 12” X W. 8-1/4” 2 LBS.

SPO 30 H. 14-1/2” X W. 7-1/4” 2-1/2 LBS.

SPO 35 H. 15-1/2” X W. 8-1/4” 3 LBS.

SPO 35-B H. 14-3/4” X W. 7” 3 LBS.

SPO 30-X H. 15-5/8” X W. 7” 3 LBS.

SPO 32 H. 16-3/4” X W. 8-3/4” 3-1/2 LBS.

SPO 60-X H. 14-1/2” X W. 8-1/4” 6 LBS.

SPO 76 H. 17-1/2” X W. 7-3/4” 5-1/2 LBS.

SPO 19 H. 15-1/2” X W. 7-3/4” 5-1/2 LBS.

SPO 76-S H. 12-1/4” X W. 8-1/4” 4 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

SPO 34 H. 8/4” X W. 10-1/4” 2.5 LBS.

SPO 679-XL H. 6-1/2” X W. 8-1/4” 2 LBS.

SPO 145 H. 7-3/4” X W. 6-1/4” 1-3/4 LBS.

SPO 146 H. 12-1/2” X W. 6-1/2” 2-1/4 LBS.

SPO 95 H. 14-1/2” X W. 7” 2-1/2 LBS.

SPO 147 H. 18” X W. 8-1/8” 4 LBS.

SPO 8330 H. 18” X W. 7” 3-1/2 LBS.

SPO 8332 H. 15” X W. 5-3/4” 3 LBS.

SPO 8333 H. 17” X W. 6-3/4” 3 LBS.

SPO 33 H. 15” X W. 8” 3-1/2 LBS.

SPO 39 H. 8” X W. 15-1/2” 5.5 LBS.

SPO 641 H. 17-5/8” X W. 7-3/4” 3 LBS.

SPO 7836 H. 5-3/4” X W. 7-3/8” 3 LBS.

SPO 7837 H. 11-1/2” X W. 7-3/4” 4-1/4 LBS.

SPO 144 H. 7-3/4” X W. 13” 2.5 LBS.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

51

© 2010 STEEL AND PIPES, INC.

MODERN DESIGNS

18


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 48/1 1/2” sq. 35 7/16” H

Art. 48/A/13 1/2” sq. 35 7/16” H

52

Art. 48/2 1/2” sq. 35 7/16” H

Art. 48/A/16 1/2” sq. 35 7/16” H

Art. 48/3 1/2” sq. 35 7/16” H

Art. 64/F/8 1/2” sq. 35 7/16” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 48/4 1/2” sq. 35 7/16” H

Art. 64/I/5 9/16” sq. 35 7/16” H


ORNAMENTAL IRON DIVISION Art. 64/I/3 9/16” sq. 35 7/16” H

Art. 505/3 9/16” sq. 35 7/16” Approx.

Art. 64/H/10 9/16” sq. 35 7/16” H

Art. 505/4 9/16” sq. 35 7/16” Approx.

Art. 489/1 9/16” sq. 35 7/16” Approx.

Art. 499/1 1/2” Dia. 35 7/16” H

Art. 489/2 9/16” sq. 35 7/16” Approx.

Art. 70/D/1 9/16” sq. 35 716” H

Art. 70/D/2 9/16” sq. 35 716” H

Art. 53/3 1/2” sq. 35 716” H

Art. 65/8 1/2” sq. 35 716” H

Art. 70/D/3 9/16” sq. 35 716” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

53

© 2010 STEEL AND PIPES, INC.

Art. 64/I/2 9/16” sq. 35 7/16” H


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 1701/6 9/16” Sq. 39 1/2” H

Art. 1716/14 9/16” Dia. 39 1/2” H

54

Art. 1733/10 9/16” Sq. 39 1/2” H

Art. 1716/16 9/16” Dia. 39 1/2” HOlium

Art. 1733/12 9/16” Sq. 39 1/2” H

Art. 1716/18 9/16” Dia. 39 1/2” H

Art. 1702/2 9/16” Sq. 39 1/2” H

Art. 1716/24 9/16” Dia. 39 1/2” H

Art. 1702/4 9/16” Sq. 39 1/2” H

Art. 64/A/3 1/2" sq. 8 5/8” W. 35 7/16” H

Art. 1702/6 9/16” Sq. 39 1/2” H

Art. 64/B/2 1/2" sq. 8 5/8” W. 35 7/16” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 1730/8 9/16” Sq. 39 1/2” H

Art. 469/1 1/2" sq. 5 3/4” W. 35 7/16” H


ORNAMENTAL IRON DIVISION Art. 577/2 9/16" dia. 6 5/8” W. 35 7/16” H

Art. 52/2 1/2" sq. 9 1/4” W. 35 7/16” H

Art. 561/6 9/16" sq. 8 1/4” W. 35 7/16” H

Art. 51/3 1/2" sq. 11 13/16” W. 35 7/16” H

Art. 64/G/2 9/16" sq. 8 7/8” W. 35 7/16” H

Art. 70/B/1 1/2” sq. 7 7/8” W. 35 7/16” H

Art. 52/A/3 1/2” sq. 6 5/8” W. 35 7/16” H

Art. 52/A/5 1/2” sq. 6 5/8” W. 35 7/16” H

Art. 1753/6 1/2” sq. 10 1/4” W. 39 1/2” H

Art. 53/1 1/2" sq. 9 1/4” W. 35 7/16” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

55

© 2010 STEEL AND PIPES, INC.

Art. 52/F/1 1/2" sq. 10 1/4” W. 35 7/16” H


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 1701/2 9/16" sq. 39 1/2” H

Art. 1702/14 9/16" sq. 39 1/2” H

56

Art. 1701/4 9/16" sq. 39 1/2” H

Art. 1702/15 1" sq. 47 1/4” H

Art. 50/9 9/16" sq. 1 3/16” W x 35 7/16" H

Art. 1701/14 9/16" sq. 39 1/2” H

Art. 50/10 9/16" sq. 1 3/16” W x 35 7/16" H

Art. 1701/15 1" sq. 47 1/4” H

Art. 64/F/3 9/16" sq. 35 7/16" H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 64/F/5 9/16" sq. 35 7/16" H


ORNAMENTAL IRON DIVISION 57

© 2010 STEEL AND PIPES, INC.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

Art.1043/1 1/2" sq. 8 1/4” W. 40 1/2” H

© 2010 STEEL AND PIPES, INC.

Art. 475/2 15” x 32 7/16”

58

Art.1043/2 1/2" sq. 19 5/16” W. 40 1/2” H”

Art. 479/1 1/2" sq. 4 5/16” W. 35 7/16” H

Art. 479/2 1/2" sq. 15 1/8” W. 35 7/16” H

Art. 475/1 15” x 32 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION Art. GD/20/2 1/2” Sq. 4 5/16” W. 39 1/2” H

Art. GD/20/6 1/2” Sq. 3 15/16” W. 39 1/2” H

Art. GD/20/7 1/2” Sq. 3 15/16” W. 39 1/2” H

Art. GD/58/3 1/2” Sq. 4 3/4” W. 39 1/2” H

Art. 1699/8 1/2” Dia. 6 5/16” W. 39 1/2” H

Art. 1699/9 1/2” Dia. 5 1/8” W. 39 1/2” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

59

© 2010 STEEL AND PIPES, INC.

Art. GD/20/1 1/2” Sq. 4 5/16” W. 39 1/2” H


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 1718/9 1/2” Sq. 39 1/2”

Art. 1720/7 1/2” Sq. 39 1/2”

60

Art. 1718/11 1/2” Sq. 39 1/2”

Art. 1720/9 1/2” Sq. 39 1/2”

Art. 1718/13 1/2” Sq. 39 1/2”

Art. 1718/15 1/2” Sq. 39 1/2”

Art. 1718/17 1” Sq. 47 1/4”

Art. 1720/11 1/2” Sq. 39 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION Art. 1789/1 1 7/32” x 3/16” 31 1/2” H

Art. 1789/3 1 1/16” X 3/16” 31 1/2” H

Art. 1789/4 1 7/32” X 3/16” 31 1/2” H

Art. 1785/4 1 3/16” X 3/16” 37 13/32” H

Art. 1791/1 1 3/16” X 5/16” 39 1/2” H

Art. 44/12 35 7/16” x 9 7/16”

Art. 1789/2 1 1/4” X 3/16” 31 1/2” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

61

© 2010 STEEL AND PIPES, INC.

Art. 62/1 28 11/16” x 9 13/16”


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 1670/1 14 3/16” x 39 1/2”

Art. 1671/3 13 3/4” x 34 1/4”

Art. 541/2 14 9/16” x 35 7/16”

Art. 1051/4 5 7/8” x 15 3/4”

Art. 52/1 13 3/4” x 34 1/4”

Art. 1127/3 1/2” Sq. 8 1/6” x 39 1/2”

62

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 63/3 9 1/4” x 32 1/2”

Art. 1074/1 3/8” Dia. 8 1/6” x 39 1/2”


ORNAMENTAL IRON DIVISION Art. 1049/1 10 1/4” x 39 1/2”

Art. 1051/1 7 9/32” x 39 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

63

© 2010 STEEL AND PIPES, INC.

Art. 1051/2 5 9/32” x 39 1/2”


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 144/3 1 3/16” x 34 7/16”

Art. 145/3 1 3/16” x 36 9/16”

Art. 802/1 13 3/4” x 39 3/8”

64

Art. 513/1 5 1/2” x 35 7/16”

Art. 525/1 1 3/16” x 36 3/8”

Art. 533/4 1 3/16” x 36 3/8”

Art. 802/2 10 5/8” x 25 5/8”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 531/1 35 7/16”


ORNAMENTAL IRON DIVISION Art. 148/1 1 3/16” x 35 7/16”

Art. 497/1 39 3/8”

Art. 148/2 1 3/16 x 35 7/16”

Art. 497/2 39 3/8”

Art. 149/1 35 7/16” Approx.

Art. 105/1 39 1/2”

Art. 98/1 39 3/8”

Art. 105/2 39 3/8”

Art. 99/2 39 3/8”

Art. 1184/3 39 1/2”

Art. 99/1 39 3/8”

Art. 1185/1 39 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

65

© 2010 STEEL AND PIPES, INC.

Art. 109/3 39 3/8”


ORNAMENTAL IRON DIVISION

Art. 64/I/1 1”x 1” x 47 1/4”

Art. 64/F/1 1”x 1” x 47 1/4”

Art. 112/5 1”Sq. 47" 1/4" H

Art. 112/6 1 3/16” sq. 47" 1/4" H

© 2010 STEEL AND PIPES, INC.

Art. 112/7 1" sq 47" 1/4" H Art. 113/5/25/S 1" sq. 47" 1/4" H

66

Art. 799/1 1" sq. 47" 1/4" H

Art. 112/8 1 3/16” sq. 47" 1/4" H

Art. 113/2 1 3/16” sq. 47" 1/4" H

Art. 797/2 1 3/16” dia. 47" 1/4" H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 797/1 1 3/16” dia. 47" 1/4" H


ORNAMENTAL IRON DIVISION Art. 1658/1 22 7/8” X 17 5/16” Extendible 5/8” x 5/16” flat bar

Art. 1659/1 9/16” sq. 17 3/4” Dia.

Art. 1657/1 16 1/8” X 15 3/4” 5/8” x 5/16” flat bar

Art. 679/1 1/2” dia. 16 1/2” x 16 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

67

© 2010 STEEL AND PIPES, INC.

Art. 1657/4 22 5/8” X 15 3/4” 5/8” x 5/16” flat bar


ORNAMENTAL IRON DIVISION

LARGE PANELS

© 2010 STEEL AND PIPES, INC.

Art. GD0012 5/8” x 5/16” 24 1/64" W approx. x 36 39/64” H approx.

Art. GD004 5/8” x 5/16” 30 5/16” W approx. x 40 35/64” H approx.

68

44 3/32” approx.

Art. GD005 5/8” x 5/16” 55 21/64” W approx. x 26 3/8” H approx.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

58 21/32” approx.


ORNAMENTAL IRON DIVISION Art. GD0016 5/8” x 5/16” 10 5/8" W approx. x 39 3/8” H approx.

Art. GD0018 5/8” x 5/16” 12 63/63” W approx. x 36 7/32” H approx.

Art. GD0017 5/8” x 5/16” 12 63/63” W approx. x 37 13/64” H approx.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

69

© 2010 STEEL AND PIPES, INC.

Art. GD0014 5/8” x 5/16” 8 3/4” W approx. x 29 15/16” H approx.


ORNAMENTAL IRON DIVISION

Art. 26/C/1 1/2” sq. 16 7/8” x 20 5/8”

Art. 17/1 9 7/8” dia. 3/8” x 3/16”

© 2010 STEEL AND PIPES, INC.

Art. 17/2 5/16” sq. 9 7/8" dia.

Art. 23/2 3/4” x 5/32” 9 7/8” dia.

70

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 23/1 3/8” x 13/16” 9 7/8 “ dia. flat bar

Art. 446/1 13 3/4” dia. 1/2" x 1/4" flat bar

Art. 1011/1 3/8” dia. 17 5/16” dia.


ORNAMENTAL IRON DIVISION Art. 36/2 9 1/16” x 15”

Art. 36/1 8 5/8” x 9 7/8”

Art. 35/1 8 1/16” x 15 1/2”

Art. 35/2 7 7/8” x 13 9/16”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

71

© 2010 STEEL AND PIPES, INC.

Art. 37/3 3 3/4” x 3 3/4”


ORNAMENTAL IRON DIVISION

Art. 1280/2 35 7/16” x 11 13/16"

Art. 1281/2 48 1/4” x 17 1/2”

Art. 116/D/2 17 23/32” x 50 13/32”

Art. 696/3 15 3/4” X 15 15/16”

Art. 696/1 39 3/4” x 11”

Art. 1281/8 29 1/2” W x 9 7/8” H

Art. 1281/12 43" W x 12" H

© 2010 STEEL AND PIPES, INC.

Art. 1281/14 31 1/2” W x 8 7/8” H

72

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Art. 158/1 9/16” x 5/32” Art. 158/2 11/16” x 1/4”

ORNAMENTAL IRON DIVISION

LENGTH OF BARS 13' APPROX

LENGTH OF BARS 10' APPROX Art. 158/7 5/8” x 1/4”

Art. 114/10 1 9/16” x 5/16”

Art. 114/5 1 9/16” x 5/16”

LENGTH OF BARS 10' APPROX

Art. 1834/2 1 1/4” x 3/16”

Art. 1834/3 1 1/4” x 5/32”

L 20' APPROX

L 10' APPROX

Art. 811/6/T 2 5/16” x 5/8” To fit 1 1/4" and 1 9/16" Tubing, channel or flat bar

Art. 114/A/3 2" x 9/16"

Art. 1834/4 1 1/4” x 3/16”

Art. 1834/5 1 1/4” x 3/16”

L 20' APPROX L 20' APPROX Art. 811/6 MCR 2 7/32" x 13/16"

Art. 811/7 (MCR) 1 3/4" x 9/16"

Art. 1834/6 1 5/32” x 3/16”

L 20' APPROX Art. 811/7/T 1 5/8" x 7/16"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

73

© 2010 STEEL AND PIPES, INC.

Art. 1834/1 1 1/4” x 3/16”


ORNAMENTAL IRON DIVISION

END PIECES FOR HANDRAILS

Art. 1822/1 for handrail Art. 114/A/3 12 25/32” dia.

Art. 1377/40 for handrail Art 811/6 Art. 1377/41 for handrail Art 811/7 Art. 1377/40/T for handrail Art 811/6/T Art. 1377/41/T for handrail Art 811/7/T

© 2010 STEEL AND PIPES, INC.

Art. 114/B/14 5 7/8” x 13 3/4” for handrail Art. 114/A/3

Art. 116/2 5 7/8” x 13 3/4” for handrail Art. 114/5 Art. 116/6 5 7/8” x 13 3/4” for handrail Art. 114/10

74

Art. 812/12 5 7/8” x 11 13/16” for handrail Art. 811/6 Art. 812/13 for handrail Art. 811/7 Art. 812/12/T 5 7/8” x 11 13/16” for handrail Art. 811/6/T Art. 812/13/T for handrail Art. 811/7/T

Art. 114/B/13 5 7/8” x 11 13/16” for handrail Art. 114/A/3

Art. 116/10 5 7/8” x 11 13/16” for handrail Art. 114/5 Art. 116/14 5 7/8” x 11 13/16” for handrail Art. 114/10

Art. 116/A/9 for handrail Art. 114/5 12 25/32” dia. Art. 116/A/13 for handrail Art. 114/10 12 25/32” dia. Art. 116/26 for handrail Art. 114/5 6 13/32” dia. Art. 116/30 for handrail Art. 114/10 6 13/32” dia.

Art. 114/B/5 17 3/4” x 35 7/16” for handrail Art. 114/5 Art. 114/B/9 17 3/4” x 35 7/16” for handrail Art. 114/10

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

HAMMERED TUBES L 20' APPROX

Art. 118/E/1 3/4” sq. Art. 118/E/2 1 3/16” x 3/4” Th. Art. 118/E/3 1 3/16” sq. Art. 118/E/5 1 9/16” sq. Art. 118/E/6 2" x 1 3/16”

Art. 118/E/9 1” sq. Art. 118/E/6S 2” x 1 3/16” 1/16” Th. Art. 118/E/9S 1” sq. 1/16” Th. Art. 1374/15 2” sq.” Art. 1374/19 1/2” sq.

HOT PIERCED BARS Art. 42/1 9/16” dia holes per bar N 14 Art. 42/2 5/8” dia holes per bar N 13 Art. 42/8 9/16” sq. holes per bar N 14 Art. 42/22 9/16” sq. holes per bar N 14

HAMMERED BARS

Art. 118/1/6000 1/2” x 20' Art. 118/2/6000 9/16” x 20'

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

75

© 2010 STEEL AND PIPES, INC.

Art. 118/1 1/2” x 10’ Art. 118/2 9/16” x 10’


ORNAMENTAL IRON DIVISION

Art. 80/A/11 2 9/16” x 5 15/16”

Art. 80/A/12 2 3/4” x 7 1/2”

Art. 80/A/1 4 5/16” x 10 5/8”

Art. 64/G/4 2 3/8” x 4 1/8”

Art. 64/G/5 2 3/8” x 4 1/8”

Art. 64/G/6 2" x 4 1/16”

Art. 80/A/3 2 3/8” x 4 5/16”

Art. 73/1 4 5/16” x 11 13/16”

Art. 88/H/2 2” X 5”1/8" Art. 88/H/3 2” X 5"

Art. 73/2 4 5/16” x 9 1/16”

© 2010 STEEL AND PIPES, INC.

Art. 157/1 3 15/16” dia Art. 157/2 4 1/2” dia.

76

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 64/G/3 4 1/8” x 5 7/8”

Art. 73/3 3 9/16” x 7 1/16”

Art. 491/8 1/2” sq. 3 15/16” dia. PLAIN Art. 491/9 1/2” sq. 3 15/16” dia. HAMMERED


Art. 94/E/1 18 1/8” X 17 15/16” 1/2” Dia.

Art. 94/E/5 24 13/32” X 16 1/8” 1/2” Dia.

Art. 94/F/5 38 3/16” X 16 1/2” 1/2” Dia.

Art. 94/E/2 18 1/8” X 17 15/16” 1/2” Dia.

Art. 94/E/6 24 13/32” X 16 1/8” 1/2” Dia.

Art. 94/F/6 38 3/16” X 16 1/2” 1/2” Dia.

Art. 687/3 1/2” Dia. 4 3/4 X 6 5/8”

Art. 687/6 1/2” Dia. 4 3/4 X 6 5/8”

Art. 94/E/3 21 1/4” X 12 1/4” 1/2” Dia.

Art. 94/E/4 21 1/4” X 12 1/4” 1/2” Dia.

Art. 94/C/11 14 1/2” X 13” 1/2” Dia.

Art. 94/C/3 6 5/8” X 4 5/16” 3/8” Dia.

Art. 94/C/12 14 1/2” X 13” 1/2” Dia.

Art. 94/C/4 6 5/8” X 4 5/16” 3/8” Dia.

Art. 94/C/1 5 1/8” X 3 15/16”

Art. 94/C/2 5 1/8” X 3 15/16”

Art. 94/F/1 27 3/16” X 12 5/8” 1/2” Dia.

Art. 94/F/2 27 3/16” X 12 5/8” 1/2” Dia.

Art. 94/F/3 31 1/2” X 19 5/16” 1/2” Dia.

Art. 94/F/4 31 1/2” X 19 5/16” 1/2” Dia.

Art. 94/C/5 10 5/8” X 7 1/2” 3/8” Dia.

ORNAMENTAL IRON DIVISION

Art. 681/8 5/8” x 5/16” 13” X 16 1/8”

Art. 94/C/6 10 5/8” X 7 1/2” 3/8” Dia.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

77

© 2010 STEEL AND PIPES, INC.

Art. 681/7 5/8” x 5/16” 13” X 16 1/8”


ORNAMENTAL IRON DIVISION

Art. 138/10 1 3/4” x 3 3/8”

Art. 662/1 4 1/8” x 8 11/16”

Art. 660/3 8 1/4" x 5"

© 2010 STEEL AND PIPES, INC.

Art. 697/3 3 3/4” dia. Art. 697/4 2 9/16” dia.

Art. 136/7 1 1/2” dia.

78

Art. 138/13 7 1/2” x 7 7/8”

Art. 662/2 4 1/8” x 8 11/16”

Art. 660/4 8 1/4" x 5"

Art. 116/A/3 3 3/4” dia

Art. 136/6 2 1/8” dia.

Art. 702/3 3 1/8” x 7 11/16”

Art. 138/11 2 15/16” x 2 3/4”

Art. 663/7 6 5/16” x 7 1/2”

Art. 660/7 8 1/4" x 5 3/4"

Art. 660/8 8 1/4" x 5 3/4"

Art. 116/A/4 2 9/16” dia

Art. 136/5 2 9/16”

Art. 663/8 6 5/16” x 7 1/2”

Art. 138/3 3 15/32” dia.

Art. 140/6 11/16" dia x 19/32" H

Art. 138/15 2 3/8” dia

Art. 138/12 3 3/4” x 4 1/8”

Art. 660/1 16" x 7"

Art. 138/4 3 9/16” dia.

Art. 140/7 15/16" dia x 1/2" H

Art. 140/5 2 3/8” dia

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 140/3 1 29/64” x 3 1/8”

Art. 660/2 16" x 7"

Art. 138/5 3 1/2” dia.

Art. 664/3 1 9/16”

Art. 137/9 4 5/16” x 2 9/16”


ORNAMENTAL IRON DIVISION Art. 137/7 2 9/16” x 5 1/8”

Art. 137/8 1 15/15” x 3 9/16”

Art. 139/4 2 1/2” x 7 7/8”

Art. 139/5 1 3/8” x 3 15/16”

Art. 116/A/6 3/8" H 3 15/16" x 3 15/16" Art. 664/7 2 x 11 3/16”

Art. 664/8 5 1/8” x 9 13/16”

Art. 139/1 1 1/8” x 2 9/16”

Art. 1408/1 3 1/8" x 3 1/8" H 11/16"

Art. 140/4 1 3/8” x 3 15/16”

Art. 1408/2 2 1/8" x 2 1/8" H 1/2"

Art. 664/9 3 1/8” x 11 13/16” Art. 116/A/7 3/8" H 3 15/16" x 3 15/16"

Art. 136/3 2 3/4” X 2 3/8”

Art. 1405/2

Art. 136/4 2 3/4” X 2 3/8”

Art. 1405/3

Art. 136/1 1 9/16" x 4 5/16" right hand

Art. 136/2 1 9/16" x 4 5/16" left hand

Art. 94/A/6 3 15/16" x 3 15/16" x 5/16" H

Art. 841/7 1/8" 2 15/16" x 20 x 1/2"

Art. 841/6 5/32" H 7 7/8" x 5 29/32"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

79

© 2010 STEEL AND PIPES, INC.

Art. 94/A/3 3 15/16" x 3 15/16" x 5/16"


ORNAMENTAL IRON DIVISION

Art. 116/11 4 15/16” x 2 3/4” Art. 116/33 5 7/8” x 5 4/16”

Art. 169/15 4 15/16” x 1 9/16”

Art. 116/34 5 7/8” x 5 4/16”

Art. 170/A/2 2 5/8” x 4 15/16”

Art. 170/B/5 3 5/16” x 5 3/8”

Art. 170/A/3 3 578” x 2 1/8”

Art. 170/A/5 1 5/16” x 1 11/16”

Art. 170/A/7 1 7/8” x 1 7/8” Art. 170/B/4 3 5/16” x 2 1/16”

Ø 31 mm Ø 1 1/4”

Art. 181/10 4 1/8” x 11 1/4”

Art. 181/11 4 1/8” x 11 1/4” Art. 181/14 7/8” Dia.

© 2010 STEEL AND PIPES, INC.

Art. 833/4 11 1/32” x 2 3/8”

Art. 836/1 9 7/8” x 2”

Art. 836/6 10 5/8” x 1 9/16” mm

80

Ø 38 mm Ø 1 1/2”

Art. 181/12 4 1/8” x 11 1/4”

Art. 181/15

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 181/13 7/8” Dia.


external dia. 1 9/16” Art. 128/2 9/16” Sq. Art. 128/38 1/2” Sq. Art. 128/39 5/8” Sq.

Art. 155/1 1 3/16" W x 3 11/32" H Hole 33/64” dia

Art. 128/17 1 9/16" x 1 17/32" Hole 1/2” Art. 128/18 1 9/16" x 1 17/32" Hole 9/16” Art. 128/21 1 3/4" x 1 23/32" Hole 21/32” Art. 128/22 1 3/4" x 1 23/32" Hole 23/32” Art. 128/28 2" x 1 13/16" Hole 29/32”

Art. 747/10 1 9/16" x 2 3/4" Hole 19/16” Art. 747/11 1 9/16" x 2 3/4" Hole 1/2”

Art. 747/8 1 9/16" x 4 1/2" Hole 19/16” Art. 747/9 1 9/16" x 4 17/32" Hole 1/2”

ORNAMENTAL IRON DIVISION

Art. 128/9 5/8" dia. Hole 5/8” dia. Art. 128/10 1 3/4” x 2 11/16” Hole 3/4” dia. Art. 128/15 1 31/32” x 3 1/16” Hole 37/32” dia.

Art. 746/6 1 9/16" x 1 1/2" Hole 9/16”

Art. 746/4 1 29/32" x 1 3/16" Hole 5/8”

external dia. 1 9/16” Art. 128/1 9/16” Dia. Art. 128/36 1/2” sq. Art. 128/37 5/8” sq.

Art. 155/2 1 3/16" W x 2 9/16" H Hole 33/64” dia

Art. 747/12 1 9/16” x 2 9/16” 1/2” sq. hole Art. 747/13 1 3/4” x 2 21/32” Art. 747/14 2” x 3 1/16”

Art. 155/3 1 3/16" W x 2" H Hole 33/64” dia

Art. 155/4 1 3/16" W x 3/4" H Hole 33/64” dia

Art. 746/5 1 9/16" x 2 9/16" Hole 9/16”

Art. 155/6 1 3/16" W x 2 9/16" H Hole 33/64” dia

Art. 747/15 1 9/16” x 1 17/32” Hole 1/2” sq. Art. 747/16 1 3/4” x 1 11/16” Hole 9/16” sq. Art. 747/17 2" x 13/16” Hole 5/8” sq.

Art. 154/2 1 3/16" W x 5 7/8" H Hole 33/64” dia

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

81

© 2010 STEEL AND PIPES, INC.

Art. 128/6 1 9/16” x 2 17/32” Hole 1/2” dia. Art. 128/7 1 9/16” x 2 17/32” Hole 9/16” dia. Art. 128/8 1 9/16” x 2 17/32” Hole 5/8” dia.


ORNAMENTAL IRON DIVISION

Art. 124/1 1/2” dia. 4 29/32” H Art. 124/2 19/32” dia. 6 5/16” H

© 2010 STEEL AND PIPES, INC.

Art. 125/1 1 1/4” dia. 4 29/32” H

Art. 124/3 1/2” dia. 4 29/32” H Art. 124/4 19/32” dia. 6 5/16” H Art. 124/5 3/4” dia. 7 5/32” H

Art. 126/1 25/64” sq. 5 1/8” H

Art. 126/B/5 2" dia. 3 11/32” x 6 5/8” H

82

Art. 124/6 19/32” dia. 6 6/32” H

Art. 126/15 1 3/16” dia. 6 5/16” H 1 1/8” base Art. 126/16 1 9/16” dia. 7 15/32” H 1 1/2” base

Art. 126/B/9 27/32” dia. 2 19/32” x 6 5/8” H

Art. 124/7 9/16” dia. 5" H

Art. 124/8 19/32” dia. 5 3/16" H

Art. 122/A/1 1 1/4” dia 7 7/8” H

Art. 123/5 1" dia. 6 5/16” H

Art. 125/4 3/4” dia. 5 1/8" H

Art. 126/18 1 9/16” dia. 5 29/32” H

Art. 126/B/4 3/4” dia. 2 27/32” x 5 3/32” H

Art. 126/6 1 11/32” dia. 7 15/32” H Art. 126/19 1" dia. 5 1/2” H Art. 126/20 1 3/16” dia. 6 5/16” H

Art. 123/6 1 1/4” dia. 7 3/32” H

Art. 126/B/1 3/4” dia 3 7/32” x 7 21/32” H Art. 126/B/2 5/8” dia 2 21/32” x 6 9/32” H Art. 126/B/3 1/2” dia 2 1/8” x 5 3/32” H

Art. 126/A/1 19/32” dia 2 21/32” x 5 19/32” H

Art. 123/3 1 1/4” dia. 5 1/8” H

Art. 123/7 1 9/16” dia. 7 7/8” H

Art. 726/19 3 5/32" x 5 33/64"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 120/3 1 3/16” x 6 11/16”

Art. 121/4 2 1/8”


4 Filaments

Art. 116/A/20 2 3/4” x 2 3/16”

Art. 160/43 3 1/8” x 5 1/8” Base 5 9/16” dia.

Art. 749/22 2 3/64" dia. 3 15/16"

Art. 116/A/21 1 9/16” dia.

Art. 160/44 3 25/32” x 3 21/32” Base 1 9/16” dia.

Art. 113/9 3" dia.

Art. 160/45 2 9/32” x 4 5/8” Base 1 9/16” dia.

ORNAMENTAL IRON DIVISION

Art. 116/F/5 2” Art. 116/F/6 2 3/8” Art. 116/F/7 2 3/8” Art. 116/F/8 3 1/8” Art. 116/F/9 3 9/16” Art. 116/F/10 3 15/16”

Art. 113/10 2 3/4” dia.

Art. 160/46 2 1/8” x 3 1/16” Base 1 9/16” dia.

Art. 159/1 1 3/8” x 3 9/16” L 5/16” Art. 159/3 2 3/8” x 5 1/8” L 1/2” Art. 159/4 2 3/8” x 5 1/8” L 9/16” Art. 159/5 2 9/16” x 5 3/4” L 5/8” Art. 159/6 3 1/8” x 6 1/2” L 3/4” Art. 159/7 3 3/4” x 7 1/16” L 15/16”

Art. 158/B/7 1/4” sq. 2 3/4”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

83

© 2010 STEEL AND PIPES, INC.

Art. 116/F/1 3/4” Art. 116/F/2 1” Art. 116/F/3 1 3/16” Art. 123/1 1 9/16” Art. 116/F/4 1 9/16”


ORNAMENTAL IRON DIVISION

STAINLESS STEEL

Art. 1424/18 1 13/16”x 9/16”

Art. 1422/1 1/2”Dia 39 1/2”

Art. 1422/2 1/2”Dia 39 1/2”

Art. 1423/12 1 13/16”x 9/16”

Art. 1416/6/X 1 3/16” Dia. 47”

© 2010 STEEL AND PIPES, INC.

Art. 1425/1 2 3/4 Dia. 4 3/4”

Art. 1425/2 1 19/64” Dia. 5 1/2”

84

Art. 1417/2/X 1/2”Dia 39 1/2”

Art. 1417/3/X 1/2”Dia 39 1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

FORGED ALUMINIUM

Art. 768/11 3 15/16” x 39 1/2”

Art. 768/12 9/16” SQ. x 39 1/2”

Art. 768/4 9/16” SQ. 39 1/2”

Art. 768/5 Art. 768/6 9/16” SQ. 9/16” SQ. 39 1/2” 1 3/16” x 39 1/2”

Art. 769/9 9/16” SQ. x 39 1/2”

Art. 768/10 9/16” SQ. x 39 1/2”

Art. 768/7 9/16” SQ. 4 5/16” x 39 1/2”

Art. 769/11 1” SQ. 47”

Art. 768/8 9/16” SQ. 8 7/8” x 39 1/2”

Art. 768/9 8 1/4” x 39 1/2”

Art. 768/1 2 3/8” x 4 1/8”

Art. 768/2 2 3/8” x 4 1/8”

Art. 1448/8 3 1/8” SQ.

Art. 1448/9 4” x 4”

Art. 1448/10 4 3/4”.

Art. 1448/11 5 1/2”.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

85

© 2010 STEEL AND PIPES, INC.

Art. 768/10 Art. 768/3 1” SQ. 9/16” SQ. 47” 5 1/2” x 39 1/2”


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 1444/11 5/8” SQ. 39 1/2”

Art. 1446/3 1/2” SQ. 39 1/2”

86

Art. 1444/12 5/8” SQ. 39 1/2”

Art. 1446/4 1/2” SQ. 39 1/2”

Art. 1444/13 5/8” SQ. 39 1/2”

Art. 1448/3 1 3/16” SQ. 47”

Art. 1444/14 5/8” SQ. 39 1/2”

Art. 1444/16 5/8” SQ. 7 7/8” X 39 1/2”

Art. 1444/17 5/8” SQ. 5 1/2” X 39 1/2”

Art. 1435/3 33” x 13”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Art. 772/3 Mtl. 9/16” x 5/32” BAR L 10' APPROX

Art. 772/16 Mtl 9/16” x 9/16” L 10’ Approx. Grooved

Art. 772/8 Mtl 9/16” x 9/16” 2 3/8” W. x 5 1/8” H Art. 772/9 Mtl 1" x 1" 3 3/4” W. x 7 1/16” H Art. 1443/13 Mtl 5/8” 2 61/64” W x 5 29/38” H Wt. .34 lb.

Art. 771/1 Mtl 1/8” 1 9/16” W. x 4 5/16” H

Art. 771/4 Mtl 1/8” 2 3/4” W. x 2 3/8” H

Art. 771/2 Mtl 1/8” 1 9/16” W. x 4 5/16” H

Art. 771/5 Mtl 1/8” 2 3/4” W. x 2 3/8” H

Art. 772/6 Mtl 1 9/16” x 5/16” Art. 772/7 Mtl 1 3/16” x 5/16” BAR L 10' APPROX

HANDRAIL Art. 772/2 Mtl 1 9/16” x 5/16” L 10’ Approx.

Art. 772/4 Mtl 1 9/16” x 5/16” L 10’ Approx. Art. 772/5 Mtl 1” Sq. L 10’ Approx.

ORNAMENTAL IRON DIVISION

Art. 772/13 Mtl 1/2” x 1/4” 4" dia. Art. 772/14 Mtl 1/2” x 1/4” 4 1/2” dia. Art. 772/15 Mtl 1/2” x 1/4” 5 1/8” dia.

Art. 771/11 Base 1/2” dia. 4 15/16” H

Art. 772/1 for art. Art. 772/2

Art. 771/12 Base 19/32” dia. 6 5/16” H

Art. 771/14 Base 5/8” dia. 6 5/8” H

BAR L 10' APPROX

Art. 770/3 Mtl 1/2” x 1/4” 4 3/4” W. x 8 11/16” H

Art. 770/4 Mtl 1/2” x 1/4” 4 3/4” W. x 11 7/16” H

Art. 770/5 Mtl 1/2” x 1/4” 4 3/4” W. x 14 3/16” H

Art. 770/9 Mtl1/2” x 1/4” 3 9/16” W. x 7 1/16” H

Art. 770/10 Mtl 1/2” x 1/4” 2 3/8” W. x 4 1/2” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

87

© 2010 STEEL AND PIPES, INC.

Art. 772/17 Mtl 9/16” x 9/16” L 63” Grooved

Art. 772/10 Mtl 9/16” x 9/16” 4” dia. Art. 772/11 Mtl 9/16” x 9/16” 4 1/2” dia. Art. 772/12 Mtl 9/16” x 9/16” 5 1/8” dia.


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

Art. 767/1 Mtl 1/2” x 1/4” 13 3/4” W. x 34 1/4” H

Art. 767/2 Mtl 3/4” x 1/4” 9 1/4” W. x 28 3/8” H

Art. 767/3 Mtl 3/4” x 1/4” 9 1/4” W. x 28 3/8” H

Art. 769/6 Mtl 9/16” sq. 11 13/16” W. x 35 7/16” H

Art. 769/8 Mtl 9/16” sq. 39 1/2” H

88

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Art. 769/2 Mtl 9/16” sq. 39 1/2” H Grooved

Art. 769/7 Mtl 9/16” sq. 39 1/2” H


ORNAMENTAL IRON DIVISION Art. 1444/8 Mtl 1 9/16” x 5/16” 7 7/8” W. x 39 1/2” H

Hammered Art. 769/4 Mtl 9/16” sq. 39 1/2” H

Art. 769/1 Mtl 9/16” sq. 9 1/4” W. x 39 1/2” H Grooved

Art. 769/12 Mtl 9/16” sq. 39 1/2” H

Art. 769/13 Mtl 9/16” sq. 39 1/2” H Grooved

Art. 769/5 Mtl 9/16” sq. 7 1/16” W. x 39 1/2” H

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

89

© 2010 STEEL AND PIPES, INC.

Art. 769/3 Mtl 1 9/16” x 5/16” 35 7/16” H Hammered


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

90

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION 91

© 2010 STEEL AND PIPES, INC.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

“V” GROOVED GATE WHEELS • All kinds of wheels for several capacities • Available sizes 3”, 4”, 6”

4 1/8” 3” 7” 5 1/4”

ITEM NUMBER

DESCRIPTION

ITEM NUMBER

DESCRIPTION

8.VG3

V-GROOVE WHEEL 3"

220.020.3074

GATE WHEELS 4"

• 1,320 Lbs. Capacity • No lubrication needed

• Grease fitting for lubrication • Cast Iron

ITEM NUMBER

DESCRIPTION

ITEM NUMBER

220.020.3076

GATE WHEELS 6"

8.VG4I

• Grease Fitting for Lubrication • Cast Iron

ITEM NUMBER

DESCRIPTION

8.VGBOXG 8.VGBOX6

V-GROOVE BOX 4" GALV. V-GROOVE BOX 6" GALV.

• Smooth Rubber Cylinder • Sturdy Metal Bracket DESCRIPTION

ITALIAN 4" V/G THICK 1320LB

• 1,320 Lbs. Capacity • No lubrication needed

ITEM NUMBER DESCRIPTION 8.RG3 GUIDE ROLL 3" 8.RG6 GUIDE ROLL 6"

• 3,000 Lbs. Capacity • No lubrication needed ITEM NUMBER

DESCRIPTION

ITEM NUMBER DESCRIPTION

8.VG4IB

4" WHEEL WITH BRACKET

8.VG4IH

© 2010 STEEL AND PIPES, INC.

• 3,000 Lbs. Capacity • No lubrication needed

ITEM NUMBER

8.VG6I

ITALIAN 4" V/G THICK CHROME HEAVY DUTY

DESCRIPTION

SLIDING GATE V- GROOVE TRACK ITEM NUMBER

DESCRIPTION

8.VTRACK

V-TRACK FOR GATES 20’

• Fits “V” Grooved Wheels • 1 1/4” H x 4” w x 20’-0” lenght

WHEEL 6" 160 X 30MM ART844/13

• 5,000 Lbs. Capacity • No lubrication needed

92

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

TROLLEY TRUCKS AND SLIDING DOOR HARDWARE

ALL TROLLEY TRU C ARE SOLD KS IN PAIRS

ITEM NUMBER

DESCRIPTION

ITEM NUMBER

DESCRIPTION

8.D150 8.D300

SINGLE TROLLEY FOR RAIL U-30 DOUBLE TROLLEY FOR RAIL U30

8.GUIA

DOUBLE GUIDE 35mm BRONCE

ITEM NUMBER

DESCRIPTION

220.020.051F

BRACKET RAIL FOR TROLLEY

• Galvanized steel trolley track. • Max. capacity 400 lbs.

ITEM NUMBER

DESCRIPTION

8.D700

HEAVY TROLLEY FOR RAIL U700

SLIDING DOOR TRACK

220.020.105B

DESCRIPTION

TROLLEY TRUCK “CAJA BOLA” 50C

DESCRIPTION

220.020.1606 220.020.1608 220.020.1610 220.020.1612 220.020.1614 220.020.1616 220.020.1620

TROLLEY RAIL GALV. 6L.FT TROLLEY RAIL GALV. 8L.FT TROLLEY RAIL GALV. 10L.FT TROLLEY RAIL GALV. 12L.FT TROLLEY RAIL GALV. 14L.FT TROLLEY RAIL GALV. 16L.FT TROLLEY RAIL GALV. 20L.FT

LENGHT

6’-0”LONG 8’-0”LONG 10’-0”LONG 12’-0”LONG 14’-0”LONG 16’-0”LONG 20’-0”LONG

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

93

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER

ITEM NUMBER


ORNAMENTAL IRON DIVISION

HINGES BLACK STEEL, GALVANIZED • Wide variety of hinges for all kinds of work with gates • All sold in pairs STANDARD DUTY WELDABLE HINGE ITEM NUMBER

DESCRIPTION

8.1010 220.007.3535 220.007.4040

HINGE 3-1/2" X 2-1/4" HINGES BLIND 3-1/2" X 3-1/2" HINGES BLIND 4" X 4"

STEEL BARRIER HINGE ITEM NUMBER

DESCRIPTION

8.BH03

3" ROUND HINGE

EXTRA HEAVY DUTY WELDABLE HINGE ITEM NUMBER

DESCRIPTION

8.BH06

HEAVY DUTY HINGE GRAY 6"X5"

• For gates/doors up to 100lbs.

BARREL HINGES ITEM NUMBER

DESCRIPTION

8.BH05 8.BH07

5" BARREL HINGE (MEDIUM) 7" BARREL HINGE (LARGE)

• 5” For gates/doors up to 400lbs. • 7” For gates/doors up to 700lbs.

Large

© 2010 STEEL AND PIPES, INC.

BH07

ITEM NUMBER

DESCRIPTION

8.BH04

GOZNE DE PERNO 4"

• For gates/doors up to 300lbs. 1/

3/8Ó 3/8Ó 4-7/8Ó

1-

6-3/4Ó

• Weldable - Machined from high strength steel with a heavy duty plate welded securely on the side for easy weld-on installation. Grease fitting for easy lubrication. Ball bearing for smooth operation.

PLUG HINGE WITH RIGHT & LEFT WING

Medium

1-3/4Ó

BH05 94

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

WHEELS

• Wheels in rubber and nylon swivel or fixed • Sizes from 2” to 10” RUBBER SWIVEL CASTER WHEELS ITEM NUMBER

DESCRIPTION

250.024.005 250.024.010 250.024.018 250.024.020 250.024.030 250.024.035

2" RUBBER SWIVEL CASTER WHEEL 3" RUBBER SWIVEL CASTER WHEEL 4" RUBBER SWIVEL CASTER WHEEL 5" RUBBER SWIVEL CASTER WHEEL 6" RUBBER SWIVEL CASTER WHEEL 8" RUBBER SWIVEL CASTER WHEEL

NYLON CASTER SWIVEL WHEEL ITEM NUMBER

DESCRIPTION

250.024.012

3" NYLON CASTER SWIVEL WHEEL

NYLON FIXED CASTER WHEEL ITEM NUMBER

250.024.017

DESCRIPTION

3" NYLON CASTER FIXED WHEEL

METAL RIM SOLID RUBBER TIRE ITEM NUMBER

DESCRIPTION

250.024.045

8" METAL RIM SOLID RUBBER TIRE

RUBBER FIXED CASTER TIRE ITEM NUMBER

250.024.025

ITEM NUMBER

DESCRIPTION

250.024.050

10" PVC RIM SOLID RUBBER TIRE

DESCRIPTION

5" RUBBER FIXED CASTER WHEEL

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

95

© 2010 STEEL AND PIPES, INC.

PVC RIM SOLID RUBBER TIRE


ORNAMENTAL IRON DIVISION

STEEL LOCKS AND BOXES

6.75” 3.5” 4.25” 4.25”

DOUBLE DEADBOLT LEVER PASSAGE W/ BLACK METAL BOX

DEADBOLT LOCK W/METAL BOX ITEM NUMBER

DESCRIPTION

220.020.6665

GATE LOCK 6665 (”CAJA CUADRADA”)

ITEM NUMBER

DESCRIPTION

8.RWSET

MOUNTED DOUBLE LOCK

3.50” 7” STEEL STANDARD SINGLE BOX

© 2010 STEEL AND PIPES, INC.

DESCRIPTION

8.C5

CAJA CERRADURA SENCILLA (P96)

2”

HOOK LOCK ITEM NUMBER

DESCRIPTION

220.020.128A

HOOK LOCK

6.75”

6.5”

YALE® LOCK PLATE ITEM NUMBER

DESCRIPTION

8.CHAPA

CHAPA CERRADURA YALE

4.25” STEEL STANDARD DOUBLE BOX

4” 96

ITEM NUMBER

ITEM NUMBER

DESCRIPTION

8.C6

CAJA CERRADURA DOBLE (P96)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

GATE AND DOOR HARDWARE

VALERO® LOCK - SATIN NICKEL ITEM NUMBER

220.633

VALERO® LOCK - SATIN NICKEL ITEM NUMBER

DESCRIPTION

VALERO® LEVER HANDLE SET IN SATIN NICKLE, KEYHOLE 85mm

220.746

DESCRIPTION

VALERO® EUROLATION LEVER HANDLE SET IN SATIN NICKLE S/S 1-1/8” ANC

VALERO® INOX LOCK ITEM NUMBER

220.768.30

VALERO® SMALL LOCK WITH HOOK 220.2001

VALERO® LOCK KEYHOLE 85mm

SIDE VIEW

DESCRIPTION

VALERO® LOCK WITH HOOK AND CYLINDER. INCLUDES BUTTERFLY KEYS

VALERO® LOCK KIT WITH HOOK ITEM NUMBER

220.778

DESCRIPTION

VALERO® LOCK WITH HOOK CHROMIUM CYLINDER

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

97

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER

FRONT VIEW

DESCRIPTION


ORNAMENTAL IRON DIVISION

GATE AND DOOR HARDWARE GATE RIM LOCK/ELECTRIC LOCK ITEM NUMBER

DESCRIPTION

8.NA636 220.630.60 220.631.60 220.680.60 220.681.60

GATE RIM LOCK-TOLEDO ® GATE RIM LOCK YALE® 630.60 RIGHT GATE RIM LOCK YALE® 631.60 LEFT YALE® ELECTRIC 680.60 YALE® ELECTRIC 681.60

LEVER HANDLE LOCK SET ITEM NUMBER

DESCRIPTION

8.RWLEVER

CS502US3LH EZ SET LEVER HANDLE

INTERIOR LOCK SET ITEM NUMBER

220.LJ067

DESCRIPTION

YALE® LEVER MORTISE LOCK SET LJ067

SLIDING DOOR LOCK

DEAD BOLT LOCK ITEM NUMBER

DESCRIPTION

8.RWCL

DEADBOLT LOCK TACO

TOLEDO® STAINLESS STEEL LOCK SET ITEM NUMBER

ITEM NUMBER

DESCRIPTION

220.U9870

SLIDING DOOR LOCK U-9870

LJ067

LJ064

DESCRIPTION

220.2021N

TOLEDO® STAINLESS STEEL LOCKSET 2021N

YALE® LEVER MORTISE LOCK SET ITEM NUMBER

220.LJ087

DESCRIPTION

YALE® LEVER MORTISE LOCK SET LJ087

© 2010 STEEL AND PIPES, INC.

YALE® MORTISE HANDLE LOCK SET

98

ITEM NUMBER

DESCRIPTION

220.LJ064 220.LJ067

YALE® LEVER MORTISE LOCK SET LJ064 YALE® LEVER MORTISE LOCK SET LJ067

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


ORNAMENTAL IRON DIVISION

WALL CLIPS, ANGLE BRACKETS, HAND-RAIL BRACKETS

ITEM NUMBER

8.1004

ITEM NUMBER

8.1005

DESCRIPTION

WELD TAB 1/4"X1-/2"X1-1/2"

ITEM NUMBER

8.1003

DESCRIPTION

3/8" HOLE WALL CLIP (P17)

ITEM NUMBER

DESCRIPTION

8.WT-109A

BRAKET 1/4"X2-1/2" HOLE 5/8"

ITEM NUMBER

DESCRIPTION

8.T606G

BRAKET “PASAMANO” GALVANIZED

DESCRIPTION

BRACKET 3-1/2"L 1"W L SHAPE

ITEM NUMBER

DESCRIPTION

8.3/8 DRV

3/8" X 2" “CLAVOS”/EXP ALUM.

GATE AND DOOR HARDWARE

8.HDSBG

ITEM NUMBER

DESCRIPTION

ITEM NUMBER

1/2" GALVANIZED SLIDE BOLT

8.P3

DESCRIPTION

ITEM NUMBER

8.HDSBXL XL HD SLIDE BOLT, 2-3/4" BOLT

8.P2

DESCRIPTION

SMALL SLIDE BOLT “PESTILLO ARMADO PEQ. #3”

DESCRIPTION

MEDIUM SLIDE BOLT “PESTILLO ARMADO MEDIANO DER o IZQ #2”

ITEM NUMBER

8.P1

DESCRIPTION

BIG SLIDE BOLT “PESTILLO ARMADO GRANDE #1”

ITEM NUMBER

DESCRIPTION

8.PESTILLO

PESTILLO SIN ARMAR

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

99

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER


ORNAMENTAL IRON DIVISION

PLASTIC CAPS ITEM NUMBER

DESCRIPTION

210.015.0050 210.015.0075 210.015.01X1 210.015.01X2 210.015.15X15 210.016.01X1 8.2PC 8.3PC

CAPS PLASTIC 1/2" X 1/2" CAPS PLASTIC 3/4" X 3/4" CAPS PLASTIC 1" X 1" CAPS PLASTIC 1" X 2" CAPS PLASTIC 1.5 X 1.5 CAPS PLASTIC FOR 1/8"X1"X1" CAP PLASTIC 2" CAP PLASTIC 3"

PVC CAPS EXTERNAL PYRAMID CAP

BALL CAP

GOTHIC CAP

ITEM NUMBER

DESCRIPTION

PVC.3.5X3.5.EPCAP PVC.4X4.EPCAP PVC.5X5.EPCAP PVC.5X5.DFCAP

3.5X3.5 EXTERNAL PYRAMID CAP 4" X 4" EXTERNAL PYRAMID CAP (C-4R9-W) 5" X 5" EXTERNAL PYRAMID CAP (C-5R9-W) PVC 5" X 5" DEEP FLANGE CAP

ITEM NUMBER

DESCRIPTION

PVC.4X4.BALLCAP PVC.5X5.BALLCAP

PVC BALL CAP WHITE 4" X 4" PVC BALL CAP WHITE 5” X 5”

ITEM NUMBER

DESCRIPTION

PVC.35X35.GOTHCAPS PVC.4X4.GOTHCAPS PVC.5X5.GOTHCAPS PVC.5X5.GOTHCAPALM

3.5" X 3.5" GOTHIC CAP WHITE 4” X 4” GOTHIC CAP WHITE 5" X 5" GOTHIC CAP WHITE 5" X 5" GOTHIC CAP ALMOND

ITEM NUMBER

NEW ENGLAND CAP

PVC.35X35.NECAP PVC.4X4.NECAP PVC.5X5.NECAP PVC.5X5.NECAPALM

DESCRIPTION

3.5" X 3.5" CAP NEW ENGLAND 4"X4" NEW ENGLAND CAP PVC 5"X5" NEW ENGLAND CAP WHITE 5"X5" NEW ENGLAND CAP ALMOND

PICKET CAP

© 2010 STEEL AND PIPES, INC.

PERGOLA CAP ITEM NUMBER

PVC.175X35.CAP PVC.2X6.CAP

100

DESCRIPTION

PERGOLA CAP FOR 1-3/4"X3-1/2" PERGOLA CAP 2" X 6"

ITEM NUMBER

DESCRIPTION

PVC.15X15.CAP

1.5"X1.5" PICKET CAP WHITE

PERGOLA CLIP ITEM NUMBER

DESCRIPTION

PVC.2X2.CLIP

PERGOLA CLIPS 2" X 2"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

ORNAMENTAL IRON DIVISION 101

© 2010 STEEL AND PIPES, INC.

IDEAS...


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

IDEAS...

102

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

ORNAMENTAL IRON DIVISION 103

© 2010 STEEL AND PIPES, INC.

IDEAS...


ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.

IDEAS...

104

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

ORNAMENTAL IRON DIVISION 105

© 2010 STEEL AND PIPES, INC.

IDEAS...


Puertas de Garaje PUERTAS DE GARAJE RESIDENCIALES •TRASLUCIENTE •LIVIANAS •TRANSMITEN HASTA UN 73% DE CLARIDAD DE LA LUZ SOLAR

3 COLORES A ESCOGER • BRONZE • BLANCO • “STAINLESS STEEL”

PUERTAS DE GARAJE RESIDENCIALES “PROTÉGÉ”

• RANCH

• COLONIAL

• RIBBED

• FLUSH

PUERTAS DE GARAJE COMERCIALES Y RESIDENCIALES • “ROLLING DOORS” • PUERTAS DE GARAJE RESISTENTE AL FUEGO • PUERTAS DE GARAJE SECCIONALES

Vendemos los herrajes de puertas de garajes al por mayor. ¡Pregúntanos!

Motores Para Portones y Puertas De Garaje MOTORES CON SISTEMA SOLAR ECOSOL, SISTEMAS “TELE-ENTRY”, ACCESORIOS Y MUCHO MAS... SISTEMAS “TELE-ENTRY” BATERIA DE RESERVA INTEGRADA

3/4 HP WD962KD

Whisper Drive Plus 1/2 HP PD210D

• SERIES MODELO 1810 • SERIES MODELO 1812 • SERIES MODELO 1837

• ECOSOL NO UTILIZA CORRIENTE ELECTRICA Y PUEDE UTILIZARSE CON TODOS LOS ACTIVADORES BFT DE BAJA TENSION

• SERIES DEIMOS • SERIES PHOBOS

• SERIES MODELO 1835


DECORATIVE METAL PANELS

DIVISION


DECORATIVE METAL PANELS DIVISION

GRIP-STRUTS GRIP STRUT® Plank contains diamond shaped openings with serrated teeth providing a safe, slip resistant surface that grabs in all directions. They come in 12 ' -0”of length • If you need less than 12’-0” we can surely sell you the lenght needed cut to size. • Available in aluminium and galvanized ASK US!!! TALL

2’’

ITEM NUMBER 056.014.1212 056.014.1912 058.080.1012

DESCRIPTION GRIP STRUT GALV. G14 X 11-3/4” X 2” TALL X 12’ GRIP STRUT GALV. G14 X 18-3/4” X 2” TALL X 12’ GRIP STRUT ALUM .080” X 9-1/2” X 2” TALL X 12’

WIRE CLOTH LOCK CRIMP • .120” Wire width • 1” x 1” Square Hole • Galvanized Steel • 4’- 0” x 8’-0” Sheets ITEM NUMBER

DESCRIPTION

044.101.0408 044.201.0408

WIRE CLOTH LOCK CRIMP GALV .120” WIRE X 1” X 1” X 4’ X 8’ WIRE CLOTH LOCK CRIMP GALV .120" WIRE X 2" X 2" X 4’ X 8’

WIRE CLOTH WELDED

© 2010 STEEL AND PIPES, INC.

• .120” Wire width • 1” x 1” Square Hole • Galvanized Steel • 4’- 0” x 8’-0” Sheets ITEM NUMBER 044.100.0408 044.200.0408

108

DESCRIPTION WIRE CLOTH WELDED GALV. 120” WIRE X 1” X 1” X 4’ X 8’ WIRE CLOTH WELDED GALV. 120" WIRE X 2" X 2" X 4' X 8'

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


045.030.0100 PERF. BLK. LA CRUZ G.22 x 4’ x 8’

045.020.1013 PERF. GALV. WEAVE 10-PD G.22 x 4’ x 8’

045.022.0255 PERF. GALV. DIAMOND HOLE G.22 x 4’ x 8’

045.020.0125 PERF. GALV. G20, 1/8” HOLE, 3/16” STG 4’ x 8’

045.016.0250 PERF. GALV. G16, 1/4” HOLE, 3/8” STG 4’ x 8’

045.018.0500 PERF. GALV. G18, 1/2” HOLE, 11/16” STG 4’ x 8’

045.001.7018 LOUVER BLK. G.18, 70-18, 4’ x 8’

045.022.0250 PERF. GALV. SQUARE HOLE 1/4”, G.22 x 4’ x 8’

045.021.0250 PERF. ALUM. SQUARE HOLE 1/4” (.049”) 4’ X 8’

045.010.0420 PERF. GALV. OBLONGO 4mm x 20mm, G.20 4’ x 8’

045.010.0620 PERF. GALV. OBLONGO 6mm x 20mm, G.22 x 4’ x 8’

045.001.7514 MINI LOUVER BLK. G.14, 75-14, 4’ x 8’

045.001.9414 LOUVER BLK. G.14, 94-14, 4’ x 8’

040.090.1500 EXP. METAL BLK. GRANADA 4’ x 8’

U-CHANNEL GALV. 043.200.0250 - 1” x 1/4” x 12’ 043.200.0632 - 1” x 1/16” x 12’ 043.200.0125 - 1” x 1/8” x 12’ 043.200.0124 - 1/2” x 1/8” x 12’

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

109

DECORATIVE METAL PANELS DIVISION

045.030.0150 PERF. BLK. MALTES G.22 x 4’ x 8’

© 2010 STEEL AND PIPES, INC.

PERFORATED METALS


DECORATIVE METAL PANELS DIVISION

EXPANDED METALS FLATTENED BLACK OR GALVANIZED “STOCK SHEETS OR CUT-TO-SIZE!” Photos may not be actual size due to printing process.

040.100.1501 EXP METAL BLK. FLAT 3/4” X #16 - 4’ x 8’

041.075.1500 EXP METAL BLK. FLAT 3/4” X #9 - 4’ x 8’

041.075.1501 EXP METAL BLK. FLAT 1.5” X #9 - 4’ x 8’

041.075.1400 EXP METAL BLK. FLAT 3/4” X #13 - 4’ x 8’

042.100.1401 EXP METAL GALV. FLAT 3/4” X #16 - 4’ x 8’

042.100.1500 EXP METAL GALV. FLAT 3/4” X #9 - 4’ x 8’

042.100.1501 EXP METAL GALV. FLAT 1.5” X #9 - 4’ x 8’

042.100.1498 EXP METAL GALV. FLAT 3/4” X #13 - 4’ x 8’

040.100.1500 EXP METAL BLK. FLAT 1/2” X #16 - 4’ x 8’ 042.100.1400 EXP METAL GALV. FLAT 1/2” X #16 - 4’ x 8’

EXPANDED GRATING

© 2010 STEEL AND PIPES, INC.

It is ideal for parking garages, sidewalks, and pedestrian accessible roadways where ventilation or drainage is required.

110

040.077.1501 EXP METAL GRAT BLK. 3/16” X #3 - 4’ x 8’

040.078.1501 EXP METAL GRAT BLK. 1/4” X #4 - 4’ x 8’

043.077.1501 EXP METAL GRAT GALV. 3/16” X #3 - 4’ x 8’

043.078.1501 EXP METAL GRAT GALV. 1/4” X #4 - 4’ x 8’

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT TOOLS & HAND TOOLS

DIVISION


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

ship all in-stock items within 24 hours to y All warranty parts, if available are shipped order is received.

SERVICE DEPARTMENT

Plasma Cutting And Welding Machines • Repair • Parts • Service

© 2010 STEEL AND PIPES, INC.

We Repair Your Machine In The Least Time Possible!

112

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

STICK ELECTRODES/MILD AND LOW ALLOY STICK ELECTRODES E7018 (WIZ 18 S) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-4) ABS (Grado 3H, 3Y), Lloyd´s (Grado 3) • Basic, low hydrogen iron powder electrode • Highest quality weld metal • Low spatter loss • High operator appeal • Outstanding out-of-position welding • Works with DC+ and AC (78 OCV)

PRODUCT NUMBER

219.10.00064 219.10.00072 219.10.00074

RECOMMENDED AMPERAGE

DIAMETER(IN)

2.4 x 350 mm (3/32”) 3.2x350mm (1/8”) 4.0x350 mm (5/32”) 4.8x350mm (3/16”)

70-100 A 100-145 A 135-200 A 170-270 A

STICK ELECTRODES E6011 (ACP 611 SS) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-3) ABS (Grade 2), Lloyd’s (Grade 2)

PRODUCT NUMBER

• All-position high cellulose electrode • General purpose versatile electrode • High penetration, root pass applications • Works on AC and DC+ • Easy strike and re-strike

RECOMMENDED AMPERAGE

DIAMETER(IN)

2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)

50 - 80 A 70 -115 A 90 -160 A

STICK ELECTRODES E6013 (SW10) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-1) • Smooth running general-purpose electrode • All-position rutile type electrode • High welder appeal • StabÍe arc even with low voltage power sources on AC • Ideal for welding thin steel sections • Easy strike and re-strike • Excellent metal wash into plate • Excellent slag detachability

PRODUCT NUMBER

DIAMETER(IN)

219.10.00019 219.10.00024

2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0x350mm (5/32”)

RECOMMENDED AMPERAGE

60-100 A 90-130 A 120-160 A

STICK ELECTRODES E6010 (ZIP 10 P)

STICK ELECTRODES E7024 (ZIP 24)

SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-3)

SPECIFICATION DATA: AWS A5.1, ASME SFA 51 (A-1, F-1) ABS (Grade 1), Lloyd’s

• All-position high cellulose DC electrode • General purpose versatile electrode • Deep penetrating arc • Easy strike and re-strike

219.10.00004

DIAMETER(IN)

2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)

RECOMMENDED AMPERAGE

50-80 A 70-115 A 90-160 A

PRODUCT NUMBER

219.10.00084

DIAMETER(IN)

3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)

RECOMMENDED AMPERAGE

140 - 180 A 180 - 250 A

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

113

© 2010 STEEL AND PIPES, INC.

PRODUCT NUMBER

• High iron powder rutile electrode • High productivity butt and filIet welding in all downhand positions • Works with AC, DC+ and DC• Self releasing slag • High operator appeal • Easy strike and re-strike


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

STICK ELECTRODES/CAST IRON/STAINLESS STEEL NIQUEL 100 (ENICI) SPECIFICATION DATA: AWS A5.15, ASME SFA 5.15 • Operation in a gentle way smooth operation • Minimum cracks • Easy machinability • Easy slag removal • Application with alternating and continuous current work in both DC and AC

PRODUCT NUMBER

DIAMETER(IN)

RECOMMENDED AMPERAGE

2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)

40-80 A 55-100 A 90-150 A

DIAMETER(IN)

RECOMMENDED AMPERAGE

CROMARCO 309L-16 PREMIUM (E309L-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Easy application, doesn’t stick • Can be dragged on the part • Sold arc less spatter and produces less splash • Slag removal and even in flat position is often casy slong removal • Higher performance in a single pass in flat position self removable • Application with Ac and DC • Contains 22-25% Cr and 12-14% Ni.

PRODUCT NUMBER

2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)

40-80 A 70-110 A 100-145 A 130-180 A

CROMARCO 312-16 PREMIUM (E312-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Works in all positions • Can be dragged to the piece and doesn’t stick • Excellent mechanical resistance • Very good resistance to corrosion • Good resistance to friction metal - metal • Deposit machinable • Contains 28-32% Cr and 8 - 10.5% Ni.

PRODUCT NUMBER

DIAMETER(IN)

2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)

RECOMMENDED AMPERAGE

40-80 A 70-110 A 100-145 A 130-180 A

© 2010 STEEL AND PIPES, INC.

CROMARCO 308L-16 PREMIUM (E308L-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Good resistance to intergranular corrosion • Easy application, electrode doesn’t stick • Can be dragged on the part • Smooth are and less spatter and produces less splash Even in flat position is easy slag removal, self removable • Deposit welding is flat • Higher performance in a single pass in flat position • Application with AC and DC Contains 18-21% Cr and 9-11% Ni.

114

PRODUCT NUMBER

DIAMETER(IN)

2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

RECOMMENDED AMPERAGE

40-80 A 70-110 A 100-145 A 130-180 A


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

STICK ELECTRODES/MILD AND LOW ALLOY ELECTRODE E6010 (FLEETWELD 5P) Fleetweld® 5P is a great choice for welding on dirty, rusty, greasy or painted steel especially in vertical or overhead applications. PRODUCT • All-position, particularly good for vertical and overhead. • Light slag with little slag interference for easy arc control. • Deep penetration with maximum admixture. NUMBER • Capable of x-ray quality welds, out-of-position. 219.10.00001 AWS Classifications: E6010 219.10.00005 Recommended Polarity: DC+ 219.10.00010

DIAMETER(IN)

3/32 1/18 5/32

WEIGHT

50LB. 50LB. 50LB.

ELECTRODE E6013 (FLEETWELD 37) Here’s a terrific all-position electrode for low amp welding on sheet metal especially in applications where appearance is important. We’ve designed Fleetweld 37 for excellent performance with smaller AC welders with low open-circuit voltages. It’s an excellent choice for jobs involving irregular or short welds that require a change in position. • An all position electrode for the welding of mild steel. • Excellent choice for sheet metal lap and fillet welds. • Superior slag control, which makes it a great choice for vertical down. AWS Classifications: E6013 Recommended Polarity: AC/DC±

PRODUCT NUMBER

DIAMETER(IN)

219.10.00020 219.10.00025 219.10.00030

WEIGHT

3/32 1/1 5/32

50LB. 50LB. 50LB.

ELECTRODE E7018 (JET-LH 78 MR) Great for jobs on mild steel and some high-strength low-alloy steels. It also tolerates high sulfur and high silicon steels. Jet-LH 78 MR features higher tensile strength for the stress-relieved properties. • Designed for welding mild steel and high strength low alloy steels. • Also, tolerates high sulfur and high silicon steels, which have poor weldability. • Capable of x-ray quality welds. • Low hydrogen may reduce the need for preheat or postheat. • Shipped in hermetically sealed containers, which can be stored indefinitely in normal conditions, without danger of moisture pickup. AWS Classifications: E7018 Recommrnded Polarity: AC/DC+

PRODUCT NUMBER

219.10.00060 219.10.00065 219.10.00070 219.10.00075

DIAMETER(IN)

3/32 1/18 5/32 3/16

WEIGHT

50LB. 50LB. 50LB. 50LB.

ELECTRODE E7018AC

PRODUCT NUMBER

219.10.00062 219.10.00067

DIAMETER(IN)

3/32 1/18

WEIGHT

50LB. 50LB.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

115

© 2010 STEEL AND PIPES, INC.

This electrode performs beautifully either way! Lincoln 7018AC is a great choice for low open circuit voltage AC power sources. Cold re-strikes are no problem with this versatile, all-position electrode. • Designed for welding mild steel and many low alloy steels. • All position welding with good deposit rates. • Flat or slightly convex beads have distinct ripples with little spatter. • Good low current and low open circuit voltage operation. AWS Classifications: E7018-H8 Recommended Polarity: AC/DC±


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

STICK ELECTRODES/MILD AND LOW ALLOY ELECTRODE EXCALIBUR E9018-B3 MR Excalibur 9018-B3 MR is a low hydrogen stick electrode designed for all-position welding of 2.25% chrome, 1% molybdenum low alloy steels. • Enhanced Arc Performance -Smooth arc and square coating burn-off for improved puddle control and visibility. • Minimize starting porosity and grinding time while maximizing productivity. • Fast clean-up for higher productivity and quality. • Stress-Relieved Mechanical Performance -Capable of exceeding AWS minimum requirement of 90 ksi (620 MPa) tensile strength after 8 hours at 1275°F (690°C). AWS Classifications: E9018-B3 H4R Recommended Polarity: AC

PRODUCT NUMBER

DIAMETER(IN)

219.10.00105 219.10.00106

1/8 5/32

WEIGHT

50LB. 50LB.

ELECTRODE EXCALIBUR E11018M MR Excalibur® 11018M MR™ is designed primarily for joining high strength steel types in the as-welded or stress relieved conditions with excellent low temperature impact properties and robust welding procedures. All-position welding, except vertical down. • Integrated Silicate Technology™ -Increased moisture resistance and decreased coating fragility. PRODUCT • Easy Strike™ Tip -Consistent, smooth arc starts. NUMBER • Square Burn-Off -Focused arc for hard to access welds. 219.10.00108 • X-Ray Quality -Demanding applications. • Hermetically Sealed Packaging – Easy Open Cans • Delivers quality product, performance reliability and consistent results. AWS Classifications: E11018M-H4R Recommended Polarity: AC/DC+

DIAMETER(IN)

1/8

WEIGHT

50LB.

STICK ELECTRODES/CAST IRON ELECTRODE SOFTWELD 99 NI (ENI-CL) A high nickel electrode specifically recommended for applicationswhere machinability is important. Even single pass welds aremachinable. It is recommended for surfacing applications and repairing small casting defects when the deposit willrequire machining. • For cast iron applications where machinability is important. • Designed for single and multiple pass stick welding. AWS Classifications: Eni-Cl Recommended Polarity: AC/DC+

© 2010 STEEL AND PIPES, INC.

PRODUCT NUMBER

219.10.00200 219.10.00205

116

DIAMETER(IN)

3/32 1/8

WEIGHT

10LB. 10LB.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MIG/MILD AND LOW ALLOY SUPERARC L-56 (ER70S-6) MILD STEEL MIG WIRE Lincoln’s premium copper coated MIG wire, SuperArc L-56 isan excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of SuperArc L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends. • MicroGuard® Ultra surface treatment for superior feeding and arc enhancement agents for excellent arc stability. • Copper coating provides superior arc starting characteristics, for long contact tip life and is manufactured not to flake, which can clog liners and contact tips. • Will support all of the traditional modes of GMAW metal transfer: short circuiting, globular, axial spray, and pulsed spray transfer. • Well suited for applications where accurate and consistent wire feed are necessary. • Excellent spatter control and bead profile. AWS Classifications: ER70S-6 Recommended Polarity: DC+

PRODUCT NUMBER

DIAMETER(IN)

219.10.00395 219.10.00397

WEIGHT

L56 L56

2 LB. 33 LB.

ALLOY ER70S-6 MIG WIRE ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for butt and fillet welding of sheet and plate of a variety of thickness. Applications include general carbon steel fabrication. AWS Classifications: ER70S-6 Recommended Polarity: DC+

PRODUCT NUMBER

DIAMETER(IN)

219.10.00379 219.10.00380 219.10.00383 219.10.00384 219.10.00386 219.10.00387

WEIGHT

L56-035 L56-045 L56-030 L56-035 L56-030 L56-035

2 LB. 25 LB. 11 LB. 11 LB. 33 LB. 33 LB.

MIG/ALUMINUM ALLOY ER5356 MIG WIRE

PRODUCT NUMBER

219.10.00460 219.10.00465 219.10.00466 219.10.00476

DIAMETER(IN)

0.030 0.035 0.035 3/64

WEIGHT

1 lb. 1 lb. 16 lb. 16 lb.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

117

© 2010 STEEL AND PIPES, INC.

Inweld 5356 is a 5% magnesium alloyed aluminum welding wire. A great general purpose filler alloy, designed for the welding of 5XXX series alloys, when 276 Mpa (40 ksi) tensile strength is notrequired. Excellent color match after anodizing. Inweld 5356 offers much better corrosion resistance when exposed to saltwater. Average tensile strength as welded is 38,000 psi. AWS Classifications: ER5356 Recommended Polarity: AC/DC+


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MIG/STAINLESS STEEL ALLOY ER316L MIG WIRE This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent max.) in ER316L reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as columbium (niobium) or titanium. It is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. AFM ER316L, however, is not as strong at elevated temperature as the columbium (niobium) - stabilized alloys or Type ER316H. AWS Classifications: ER316L Recommended Polarity: AC/DC+

PRODUCT NUMBER

219.10.00421 219.10.00422 219.10.00424

DIAMETER(IN)

0.030 0.035 0.035

WEIGHT

2 lb. 2 lb. 25 lb.

ALLOY ER4043 MIG WIRE Inweld 4043 is a 5% silicon alloyed aluminum welding wire forthe welding of heat-treatable base alloys and more specifically, the 6XXX series alloys. It can also be used for joining wroughtto cast materials and is less sensitive to weld cracking. Silicon inthe wire increases puddle fluidity, resulting in excellent operator appeal. Inweld 4043 is also recommended for welding 3003,3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Average tensile strength as welded is 29,000 psi. AWS Classifications: ER4043 Recommended Polarity: DC+

PRODUCT NUMBER

219.10.00435 219.10.00440 219.10.00445 219.10.00447 219.10.00451

DIAMETER(IN)

0.030 0.035 3/64 0.035 3/64

WEIGHT

1 lb. 1 lb. 1 lb. 15 lb. 15 lb.

Rent Welding Machines! • Innovative Solutions. • Performance and Reliability “Extreme Duty™” • Full range of rental welding machines. • Cost Effective.

Red-D-Arc Welderentals © 2010 STEEL AND PIPES, INC.

We are the only representatives in Puerto Rico.

We are your Industrial Supermarket • www.steelandpipes.com

118

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TIG/MILD AND LOW ALLOYS ALLOY ER70S-2 WELDING WIRE ER70S-2 is used primarily for single-pass welding of killed, semi-killed, and rimmed steels, but may also be used for somemulti-pass applications. Because of the added deoxidants, ER70S-2 can be used for welding steels that have a rusty ordirty surface, with a possible sacrifice of weld quality depending on the condition of the surface. AWS Classifications: ER70S-2 Recommended Polarity: DC-

PRODUCT NUMBER

219.10.003000 219.10.00300 219.10.00301

DIAMETER(IN)

1/16 3/32 1/8

WEIGHT

10 lb. 10 lb. 10 lb.

ALLOY ER70S-6 WELDING WIRE ER70S-6 contains higher levels of manganese and silicon thanthe other standard grades of TIG wire. This wire features excellenttolerance of rust and scale, produces the highest deposit strengthof all the carbon steel TIG wires. ER70S-6 is used for butt andfillet welding of sheet and plate of a variety of thickness.Applications include general carbon steel fabrication. AWS Classifications: ER70S-6 Recommended Polarity: DC-

PRODUCT NUMBER

219.10.00303 219.10.00302 219.10.00304

DIAMETER(IN)

1/16 3/32 1/8

WEIGHT

10 lb. 10 lb. 10 lb.

ALLOY ER80S-B2 WELDING WIRE ER80S-B2 is used to weld 1/2Cr-1/2Mo, 1Cr-1/2Mo, and 1-1/4Cr1/2Mo steels for elevated temperatures and corrosiveservice. It is also used for joining dissimilar combinations of Cr-Mo and carbon steels. Careful control of preheat, interpasstemperatures, and postheat is essential to avoid cracking.ER80S-B2 is classified after postweld heat treatment. Specialcare must be used when using it in the as welded condition due to higher strength levels. AWS Classifications: ER80S-B2 Recommended Polarity: DC-

PRODUCT NUMBER

219.10.00344 219.10.00343

DIAMETER(IN)

1/16 3/32

WEIGHT

10 lb. 10 lb.

CONSUMABLES FOR WELDING /ARC GOUGING CARBON ELECTRODE ARC AIR GOUGING CARBON ELECTRODE

- Box of 50 rods.

PRODUCT NUMBER

219.10.00280 219.10.00281

DIAMETER(IN)

3/16 1/4

WEIGHT

12 12

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

119

© 2010 STEEL AND PIPES, INC.

DC Copper Coated Pointed Arc air gouging carbon electrode is well applied in gouging lowcarbon steel, cast, stainless steel, copper in wide ranges, such as shipbuilding, casting, boiler-making, pressure vessel, etc. Arc air gouging carbon electrodes show the following advantages: high efficiency, low noise, smooth plane, economic cost, high endurance and broad application.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TIG/STAINLESS STEEL

ALLOY ER308L WELDING WIRE

ER308L stainless steel TIG welding wire. For the joining of commonaustenitic stainless steels such as types 304, 304L, 321, CF-8, and CF-3. Provides good resistance to intergranular corrosion. AWS Classifications: ER308L Recommended Polarity: DCPRODUCT NUMBER

219.10.00305 219.10.00310 219.10.00315

ALLOY ER309L WELDING WIRE ER309L is the same classification as ER309, except for the lowcarbon content. Low carbon (0.03 % max) in this filler metal reduces the possibility of intergranular carbide precipitation. This increases the resistance to intergranular corrosion without the use of stabilizers such as columbium (niobium) or titanium.Strength of this low-carbon alloy, however, may not be as great at elevated temperatures as that of the columbium (niobium) stabilized alloys or ER309. AWS Classifications: ER309L Recommended Polarity: DCPRODUCT NUMBER

219.10.00320 219.10.00325

DIAMETER(IN)

3/32 1/8

WEIGHT

10 lb. 10 lb.

DIAMETER(IN)

1/16 3/32 1/8

ALLOY ER316L WELDING WIRE

PRODUCT NUMBER

219.10.00330 219.10.00335 219.10.00340

DIAMETER(IN)

1/16 3/32 1/8

TIG ELECTRODES (EWP) PRODUCT NUMBER

219.10.00296 219.10.00298 219.10.00299

DIAMETER(IN)

1/16 3/32 1/8

© 2010 STEEL AND PIPES, INC.

TIG ELECTRODES (EWTH-2) The most common electrode used today. EWTh-2 or 2% Thoriated Tungsten Electrodes contain a nominal 2 wt-% of thorium oxide (ThO2) which is evenly dispersed throughout the entire length of each rod. Offers excellent resistance from weld pool contamination, a stable ARC and easy starting capabilities. Generally used on DC electrodes negative or straight polarity. Principally used on: Carbon steels, Stainless Steels, Nickel, Nickel Alloys, Titanium, Copper Alloys AWS Classifications: EWTh-2 Recommended Polarity: DC-

120

10 lb. 10 lb. 10 lb.

This classification is the same as ER316, except for the carboncontent. Low carbon (0.03 percent max.) in ER316L reduces thepossibility of intergranular chromium carbide precipitation andthereby increases the resistance to intergranular corrosion withoutthe use of stabilizers such as columbium (niobium) or titanium. It is primarily used for welding low-carbon molybdenum-bearingaustenitic alloys. AFM ER316L, however, is not as strong at elevated temperature as the columbium (niobium)-stabilized alloysor Type ER316H. AWS Classifications: ER316LC Recommended Polarity: DC-

TIG/TUNGSTEN ELECTRODES Pure tungsten electrodes the one without any addition of oxide. This allows the tip to form a clean, balled end which provides good arc stability on AC. The power of electronic transgression is as high as 4.5ev. Requiring a high voltage for arc derivation, it has a low current capacity and is easily burnt. It’s good for application under the condition of AC and in the situation of low welding requirements. It is generally used in the welding of aluminum and magnesium alloys (AC) and used under alternating current. AWS Classifications: EWP Recommended Polarity: AC

WEIGHT

PRODUCT NUMBER

219.10.00290 219.10.00292 219.10.00294

DIAMETER(IN)

1/16 3/32 1/8

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

WEIGHT

10 lb. 10 lb. 10 lb.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CONSUMABLES FOR WELDING/TIG ALLOY ER4043 5% Silicon Alloyed Aluminum Welding Wire Inweld 4043 is a 5% silicon alloyed aluminum welding wire for the welding of heat-treatable base alloys and more specifically, the 6XXX series alloys. It can also be used for joining wrought to cast materials and is less sensitive to weld cracking. Silicon in the wire increases puddle fluidity, resulting in excellent operator appeal. Average tensile strength as welded is 29,000 psi. AWS Class: ER4043 Polarity: AC PRODUCT NUMBER

219.10.00435 219.10.00440 219.10.00449 219.10.00451

DIAMETER(IN)

WEIGHT

.030 .035 3/64 3/64

1 lb. 1 lb. 1 lb. 16 lb.

ALLOY ER5356 5% Magnesium Alloyed Aluminum Welding Wire Inweld 5356 is a 5% magnesium alloyed aluminum welding wire. A great general purpose filler alloy, designed for the welding of 5XXX series alloys, when 276 Mpa (40 ksi) tensile strength is not required. Excellent color match after anodizing. Inweld 5356 offers much better corrosion resistance when exposed to salt water. Average tensile strength as welded is 38,000 psi. AWS Class: ER5356 Polarity: AC PRODUCT NUMBER

219.10.00460 219.10.00465 219.10.00476

DIAMETER(IN)

.030 .035 3/64

WEIGHT

1 lb. 1 lb. 1 lb.

NICKEL ELECTRODE NI 99 (ERNI-1) Nickel 99 is recommended for welding of thin cast iron sections where maximum machinability is required. Since the wire is approximately 99% nickel, weld deposits are basically “soft” and can be shaped, milled, drilled, or tapped, while the color will match that of cast iron. Nickel 99 is specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels. AWS Class: ERNi-1 Polarity: DC219.10.00200 219.10.00205

DIAMETER(IN)

1/8 3/32

WEIGHT

10 lb. 10 lb.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

121

© 2010 STEEL AND PIPES, INC.

PRODUCT NUMBER


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MARKERS AND CRAYONS

ROD OVEN

YELLOW BALL PAINT MARKER ITEM CODE

DESCRIPTION

219.15.RF55181

YELLOW MARKER BALL POINT RED FORCE • Weather-and fade-resistant marls dry in 5 minutes • Ideal for color coding, inspection, shipping, identification, assembly and fabrication • Plastic cap keeps tip clean between jobs • Marking range: (-46˚C-66˚C)

CRAYONS ITEM CODE

DESCRIPTION

219.15.RF55184 219.15.RF55185 219.15.RF55186 219.15.RF55187

TEMP STICK 150 F TEMP STICK 250 F TEMP STICK 300 F TEMP STICK 400 F

RED FORCE RED FORCE RED FORCE RED FORCE

ROD OVEN WELDERS PENCIL ITEM CODE

DESCRIPTION

219.15.RF55182

WELDERS PENCIL (PACK OF 3) RED FORCE

METALLIC MARKERS ITEM CODE

219.15.RF55179 219.15.RF55180

ITEM CODE

DESCRIPTION

219.09.00750

ROD OVEN K-50/ 120V

• These lightweight ovens are designed to protect electrodes during transfer from the holding oven to the job. • They are light and easy to carry. • Safety -yellow color ensures high visibility. • Durable steel body

DESCRIPTION

WHITE METALLIC MARKER RED FORCE YELLOW METALLIC MARKER RED FORCE

• Marks with real paint, dries in minutes • Valve-actuated system delivers paint as needed for continuous marking • Weather-, water-and UV resistant marks • Lead-free paint • Marking range: (-46˚C-66˚C)

BLACK MARKER ITEM CODE

ITEM CODE SPECIFICATIONS:

MODEL ELECTRODE CAPACITY HEATING ELEMENT VOLTAGE TEMPERATURE RANGE THERMOSTAT ELECTRODE LENGTH 500MM WEIGHT OVERALL SIZE (L x W x H)

DESCRIPTION

© 2010 STEEL AND PIPES, INC.

219.15.RF55178

BLACK MARKER (PACK OF 3) RED FORCE • Ideal for line marking • Smear-resistant, water=resistant, fast drying • For identification of parts, layout work, and marking cartons and crates

122

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

PE-5 25 KG 700W WIRE WRAP AC 240V AC/DC 60V-120V 50˚C-150˚C ADJUSTABLE THERMOSTAT WITH HIGH LIMIT SWITCH 13.1KG 360x285x580MM


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

WELDING TOOLS LOCKING C-CLAMPS WITH SWIVEL PADS Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface PRODUCT NO.

MODEL

JAW CAPACITY

SIZE

250.021.004 250.021.005 250.021.006

11SP® 6SP™ 9SP™

3-3/8" (85 mm) 2-1/8" (54 mm) 4-1/2" (112 mm)

11" (275 mm) 6" (150 mm) 9" (225 mm)

219.09.00200 CHIPPING HAMMER • Pick and Chisel with Wire Spring Handle. • Drop Forged, Heat-Treated Heads. • Welded-on Head. • Individual sale

SARGENTS SIZES

219.09.00201 WOOD CHIPPING HAMMER • Pick and Chisel with Wood Handle. • Individual sale

219.09.00402 219.09.00404 219.09.00406 219.09.00408 219.09.00410 219.09.00412

2” 4” 6” 8” 10” 12”

219.07.0170 10-WAY CYLINDER WRENCH • Sizes from 7/8” to 1 1/8” for regulators, torches and commercial acetylene cylinders, with a square 3/8” welded socket.

• Designed to work as an extra hand - enables fast and accurateholding of any ferrous object • Mag ToolTM will hold both sheet and tube at anglesof 45°, 90° and 135° • Compact design allows use in tight places • Handy Mag ToolTM - can be used as double-sided holder for weldingand assembly work • Ideal for use as work-holder and positioner in welding, soldering,marking-off, pipe installation, supporting, jigging, assembly, as aseparator, multi-units for heavy weldments, lifting etc. • Caution! Do not use with DC current when welding

MAG-TOOL, X-LARGE

10

DIMENSIONS 7-9" x 5" x 0.88" (20 x 12.5 x 21 cm)

SUPPORTS UP TO 122 lb. (55 Kg)

DIRECT LIFTS (EACH ANGLE)** 48.5 lb. (22 Kg)

NET WEIGHT 2.75 lb. (1.25 Kg)

MAGNET: ANISOTROPIC FERRITE ••In Contact with Ferrous Objects of Adequate Thickness and Smooth Surface Finish

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

123

© 2010 STEEL AND PIPES, INC.

250.021.2000 MAG TOOL™ : MULTI-PURPOSE MAGNETIC HOLDER 50LB-LARGE

M-065 013473


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

WELDING TOOLS SINGLE FLINT SPARK LIGHTERS

• This lighter feature the largest hood and round file in the industry, with a patented assembly. Used by more welders than any other, it's enduring popularity is merited by dependable performance, ease of operation, light weight, and low cost. CODE

PART. NO.

219.07.0165

2001 2001X

DESCRIPTION

SINGLE FLINT LIGHTER 6/40 THREAD SINGLE FLINT RENEWALS

POINT OF PURCHASE CARDS CODE

PART. NO.

219.07.0160

2011 2021 2031 2011X 2021X

DESCRIPTION

SINGLE FLINT LIGHTER SINGLE FLINT LIGHTER W/5 RENEWALS SINGLE FLINT LIGHTER W/10 RENEWALS SINGLE FLINT RENEWALS -5 PER CARD SINGLE FLINT RENEWALS -10 PER CARD

TRIPLE FLINT SPARK LIGHTERS • Value well worth the price is built into this superb welders' lighter by the rugged frame, three large flints, long lasting round file and bright plated finish. It will supply a profusion of hot sparks for dependable ignition under all working conditions. CODE

PART. NO.

219.07.0167

4501

DESCRIPTION

THREE FLINT LIGHTER

POINT OF PURCHASE CARDS CODE

PART. NO.

219.07.0168

5011 5021 5003X 5012X

DESCRIPTION

THREE FLINT LIGHTER THREE FLINT LIGHTER W/4 RENEWALS THREE FLINT RENEWALS - 1 PER CARD THREE FLINT RENEWALS - 4 PER CARD

SOAPSTONE HOLDER FLAT

© 2010 STEEL AND PIPES, INC.

Temporary Marking for Metal Surface Welding • Made of all-natural soapstone for superior marking. • Marks will not contaminate welds and are easily removed.

124

PART NO.

DESCRIPTION

250.021.008 250.021.007

CHALK FLAT SOAPSTONE CHALK HOLDER

250.019.2990 7” ALUMINUM ALLOY SQUARE • Strong, Die Cast Aluminum Construction. • Use as a Protractor, Mitre, or Framing Square. • Ideal for all Building and Remodeling Projects. • Precision Cast Markings. • Complete with Instruction M

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

WELDING CABLES/CONNECTORS WELDING CABLES High Temperature Welding Cable 600V Supreme flexibility and UL listed. Ultra high resistance to arc slag as well as flame, oil, grease, ozone and abrasion. Heavy duty jacket, coils easily for storage. For use I/A/W NEC Article 630 electric welders. Flexible lead cable; electrodeto welder unit. Uses may include battery cables and temporary and permanent power lead cables where allowed. DESCRIPTION

WELDING CABLE #4 WELDING CABLE #2 WELDING CABLE #1 WELDING CABLE #10 WELDING CABLE #20

WELDING CABLE LUGS CONNECTOR TERMINALS

Made Special For Welding Cable Use

Replaces Lugs with Quick Disconnects TECHNWELD connector terminals offer you the advantage of quickly connecting ordisconnecting welding cable at the power source. Connector terminals are usedin place of solder-type lugs and secured directly to the studs of the welder. The male half of a TECHNWELD cable connector is attached to welding cable and is inserted into the terminal. PART NO.

DESCRIPTION

219.09.00150 219.09.00153

CABLE LUG TE-1AF CABLE LUG TE-2AF

ELECTRODE HOLDER

• Made from a high copper alloy for maximum conductivity and strength. • Long top and bottom tip insulators are fibreglass to withstand intense heat and impact. • Suitable for heavy duty applications. • Oval-point screw cable connections on all models.

PART NO.

DESCRIPTION

219.09.00135 219.09.00140 219.09.00145

CABLE LUG FOR #3/0-4/0 CABLE LUG FOR #1/0-2/0 CABLE LUG FOR #6-2

PART NO.

219.09.00001 219.09.00005 219.09.00010 219.09.00015

DESCRIPTION

200AMP 250AMP 300AMP 500AMP

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

125

© 2010 STEEL AND PIPES, INC.

PART NO.

219.09.00100 219.09.00105 219.09.00110 219.09.00115 219.09.00120


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

WELDING CABLES/CONNECTORS GROUND CLAMPS Economy Ground Clamps A good ground connection is just as important in a welding circuit as the holder and the cables. A good ground clam preduces energy cost, extends cable life, helps produce consis-tent welds and allows ground location to be easily changed. - Cable connection: Bolt and Nut with Support. - Model EG-200 ground clamp is ideal for light duty welding. - Model EG-300 ground clamp is ideal for the farm welder or for light shop work. - Model EG-500 is excellent for field erection or where clamping to bar stock, piping or various shapes of metal is necessary.The pure copper braided shunt allows both high copper alloyjaws to carry welding current.

PART NO.

219.09.00030 219.09.00035 219.09.00040 219.09.00050

DESCRIPTION

200AMP 250AMP 300AMP 500AMP

GROUND CLAMPS-BRONZE Premium Ground Clamps For Tubing TECHNIWELD ground clamps have the largest contact are with the work of any clamp on the market. Serrated upper and lower jaws insure maximum bite to the work. A good ground clamp helps assure proper voltage for maximum weld results with allrods. Both upper and lower jaws of all three models are made from a high copper alloy assuming excellent current carrying ability. No steel jaws are used. A good ground connection assures better welds.

PART NO.

219.09.00032 219.09.00045

DESCRIPTION

200AMP 300AMP

LC-10 CABLE CONNECTORS Positive Lock-Tight Action Cable ConnectorThe Advanced design of LENCO cable connectors offers manyadvantages over older styles. Metal parts are precision machinedfrom heavy, specially shaped brass extrusion. Cam action designof male half connector pulls the two halves tightly together.Connector covers are molded from a special heat and coldresistant material. Covers have no metal liner to rust or corrode.Easily installed with a 1/4" allen wrench.For Cable Capacity: No. 4 thru 1/0

PART NO.

DESCRIPTION

219.09.00170 219.09.00171 219.09.00172

SET 1MBP MALE HALF ONLE-1MBP FEMALE HALF ONLY-1MBP

© 2010 STEEL AND PIPES, INC.

LC-40 CABLE CONNECTORS Positive Lock-Tight Action Cable ConnectorsThe Advanced design of LENCO cable connectors offers manyadvantages over older styles. Metal parts are precision machinedfrom heavy, specially shaped brass extrusion. Cam action designof male half connector pulls the two halves tightly together.Connector covers are molded from a special heat and coldresistant material. Covers have no metal liner to rust or corrode.Easily installed with a 1/4" allen wrench.For Cable Capacity: No. 1/0 thru 2/0

126

PART NO.

DESCRIPTION

219.09.00180 219.09.00185 219.09.00186

SET 2MBP MALE HALF ONLE-2MBP FEMALE HALF ONLY-2MBP

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PREMIUM FLEXIBLE WELDING CABLES 219.09.00128

1/0 FLEX-A-PRENE W/LC-40 MALE & FEMALE-50FT. GAUGE

#6 #4 #2 #1 #1/0 #2/0

25’

50’

75’

100’

150’

100 150 250 300 400 450

75 100 200 250 350 400

50 100 150 200 250 300

50 75 100 150 200 250

25 50 75 100 150 150

RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)

219.09.00130

1/0 FLEX-A-PRENE W/LC-40 MALE & 300 GROUND CLAMP -10FT. GAUGE

#6 #4 #2 #1 #1/0 #2/0

25’

50’

75’

100’

150’

100 150 250 300 400 450

75 100 200 250 350 400

50 100 150 200 250 300

50 75 100 150 200 250

25 50 75 100 150 150

RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)

219.09.00129

GAUGE

#6 #4 #2 #1 #1/0 #2/0

25’

50’

75’

100’

150’

100 150 250 300 400 450

75 100 200 250 350 400

50 100 150 200 250 300

50 75 100 150 200 250

25 50 75 100 150 150

RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

127

© 2010 STEEL AND PIPES, INC.

#1 FLEX-A-PRENE W/LC-40 MALE & AF-3 ELECTRODE HOLDER-10FT.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PRESSURE REGULATORS, ARGON FLOW REGULATORS 250 SERIES PRESSURE REGULATORS 219.07.0068

• Single Stage Design PART NO. • Home and Trade use BS2501510 • Forged brass body & housing cap BS2501540 • 2” gauges • Stem type seat mechanism • Sintered inlet filter • Built-in relief valve (oxygen, insert) • Maximum inlet: 3000 psig • Fabric reinforced neoprene diaphragm • Dimensions: 6 1/2”W x 5 1/4”H x 4 1/2”D

GAS SERVICE CGA

PSIG DELIVERY

ACETYLENE 510 OXYGEN 540

2 - 15 10 - 125

350 SERIES PRESSURE REGULATORS 219.07.0067

• Single Stage Design PART NO. • Construction and Farm use BS2501510 • Forged brass body & housing cap BS2501540 • 2-1/2” gauges • Stem type seat mechanism • Sintered inlet filter • Built-in relief valve (oxygen regulators only) • Maximum inlet: 3000 psig • Fabric reinforced neoprene diaphragm • Dimensions: 7 1/2”W x 6”H x 5”D

GAS SERVICE CGA

PSIG DELIVERY

ACETYLENE 510 OXYGEN 540

2 - 15 10 - 125

ARGON FLOW REGULATORS 219.07.0215

• Piston Style Design • 25 psig medels • Machine Brass Only • 50 CFH models • Built-in relief valve (oxygen, insert) • Maximum inlet: 3000 psig • 5/8”- 18 RH(F) outlet • Teflon Seat • Argon, CO2 and Argon/Mis models PART NO.

© 2010 STEEL AND PIPES, INC.

BS1480AR BS85AR580

128

GAS SERVICE CGA

ARGON 580 ARGON 580

MAX FLOW

50 CFH 50 CFH

PSIG DELIVERY

25 25

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

BALLON FILLERS AND REGULATORS ECONOMY BALLON FILLER VALVE

219.07.0172 Model 229 - Features straight throught construction, rugged brass body. Piston type mechanism provides reliable performance.

ECONOMY BALLON FILLER WITH CONTENTS GAUGE 219.07.0171

Model 229G - Features straight throught construction, rugged brass body. Piston type mechanism provides reliable performance. 1-1/2” rear entry cylinder content gauge

CUTTING ATTACHMENTS AND HANDLES CA350 AND CA250 CUTTING ATTACHMENT • Heavy and Medium to Light duty apparatus • Capacity: CA250 cuts uo to 5” CA350 up to 6” - with proper tip • 90˚ Head • Ease on cutting oxygen valve. • For use with Acetylene, Propane, Butane, Liquid Air, Fuel Gas • Mapp®, Natural Gas (2 psig or above), Propylene, and Hydrogen.

219.07.0235

219.07.0230

PART NO.

WEIGHT LENGHT

219.07.0235 13OZ 219.07.0230 32OZ

8” 10.5”

TIPS

CUTS

SERIES 1 SERIES 3

5” 6”

USE WITH

BSWH250 BSWH350

WH350 AND WH250 WELDING HANDLES • Heavy and Medium to Light duty apparatus • 9/16” - 18 connections • Built-in Check Valves • Tubes within a tube design • Three piece Y assembly with threaded connections • Capacity: WH350 weld up to 3” WH250 to 1 1/4” with proper nozzle

219.07.0225

219.07.0220

PART NO.

219.07.0225 219.07.0220

WEIGHT LENGHT

16OZ 18OZ

8.5” 9”

USE WITH

DESCRITION

BSCA250 MEDIUM LIGHT DUTY BSCA350 HEAVY DUTY

BS1400V HAND CUTTING TORCH PART NO.

219.16.ST 1600C

LENGHT DESCRITION

21”

MEDIUM LIGHT DUTY

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

129

© 2010 STEEL AND PIPES, INC.

219.16.ST 1600C

• 9/16” - 18 connections • 90 Head • Built-in Check Valves • Cuts from 1/8“ to Cutting Tips • Uses Series 1 Cutting Tips • 21” overall lenght


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

REPLACEMENT GAUGES REPLACEMENT PRESURE GAUGES • Brass Case or Painted Steel • Lexan Crystals • Safety Blow Out Backs • Precision Movement •1/4” NPT (National Pipe Thread) • High Visibility LOW PRESSURE GAUGES HIGH PRESSURE GAUGES GAUGE SIZE

2”

4000 PSIG

GAUGE SIZE

2”

30 PSIG

219.07.0038

100 PSIG

200 PSIG

219.07.0040

219.07.0043

400 PSIG

219.07.0045

219.07.0048

CUTTING TIPS, TIP CLEANERS TIP CLEANER 219.07.0155

Stainless steel wire files for cleaning the gas orifices of cutting and welding tips. File sizes from 49 to 77, plus a tip file in an aluminium case. • Cleaner Size 6-26 • Drill Size 77-49

HARRIS STYLE-6290NX • General Cutting • 2 Pieces • Medium Preheat

VICTOR STYLE-1-101

© 2010 STEEL AND PIPES, INC.

• Hand Cutting • Medium Preheat

130

SIZES AVAILABLE

1 2 3 4 SIZES AVAILABLE

000 00 0 1 2 3 4 5

PART NUMBER

219.07.0151 219.07.0152 219.07.0153 219.07.0154 PART NUMBER

219.07.0123 219.07.0122 219.07.0125 219.07.0130 219.07.0135 219.07.0140 219.07.0145 219.07.0147

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CUTTING TIPS, WELDING TIPS, FLASH BACK ARRESTORS, TWIN WELDING HOSE VICTOR STYLE-3-101 • Hand Cutting • Medium Preheat

VICTOR STYLE-GPN • Hand Cutting • 2 Piece- Medium to Heavy Preheat

VICTOR STYLE-W Complete welding tip assembly with mixer for style 300 torches

VICTOR STYLE-MFA Complete heating tip assembly with mixer for style 300 torches

VICTOR STYLE-MFA-1 Complete heating tip assembly with mixer for style 100 torches

SIZES AVAILABLE

0 1 2 3 4 SIZES AVAILABLE

1 2 2 4 SIZES AVAILABLE

000 00 0 1 2 3 4 5 6

PART NUMBER

219.07.0126 219.07.0131 219.07.0136 219.07.0141 219.07.0146 PART NUMBER

219.07.0150 219.07.0157 219.07.0158 219.07.0159 PART NUMBER

219.07.0185 219.07.0186 219.07.0187 219.07.0188 219.07.0189 219.07.0190 219.07.0191 219.07.0192 219.07.0193

SIZES AVAILABLE

PART NUMBER

11-08 11-10 11-12 11-15

219.07.0258 219.07.0260 219.07.0262 219.07.0264

SIZES AVAILABLE

PART NUMBER

29-4 29-8

219.07.0280 219.07.0282

FLASH BACK ARRESTOR SETS

219.07.0075 • For regulators & torches

GRADE T FITTED TWIN HOSE 219.07.0015 219.07.0020 219.07.0022

DESCRIPTION

1/4” x 25’ 1/4” x 50’ 1/4” x 100’

PSI RATING

250 250 250

CONN. TYPE

B-B B-B B-B

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

131

© 2010 STEEL AND PIPES, INC.

PART NUMBER


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TORCH OUTFITS

250 SERIES MEDIUM-DUTY OUTFITS .

350 SERIES HEAVY-DUTY OUTFITS

The Blue Star 250 series outfits provide medium-duty welding and cutting performance in home and trade enviroments. • Capacity: Cut up to 5”, weld up to 1.25” with proper tips • Contents: WH250 handle CA250 cutting attachment • 250 series Oxygen and Acetylene Regulators • 0-3-101 cutting tip • #2 Welding Nozzle

The Blue Star 350 series outfits provide heavy-duty welding and cutting performance in industrial and construction enviroments. • Capacity: Cut up to 8”, weld up to 3” with proper tips • Contents: WH350 handle CA350 cutting attachment • 250 series Oxygen and Acetylene Regulators • 0-1-101 cutting tip • #2 Welding Nozzle

219.07.0102

219.07.0101

COMPLETE WELDING & CUTTING OUTFITS PART NO.

219.07.0101 219.07.0102

OUTFIT DESCRIPTION

250 MEDIUM DUTY 350 HEAVY DUTY

CUT WELD CAPACITY CAPACITY

CONTENTS INCLUDED

HOSE SIZE INCLUDED

HANDLE

UP TO 5” UP TO 1.25” 12’ X 1/4” UP TO 8” UP TO 3” 15’ X 1/4”

WH250 WH350

CYLINDER CARTS

OXY AND CUTTING ACETYLENE CUTTING WELDING ATTACHMENT REGULATORS TIP NOZZLE

CA250 CA350

250 350

0-3-101 0-1-101

#2 #2

Model 219.07.0175 Model 219.07.0180

Model 219.07.0114

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS

WHEEL SIZE WHEEL TYPE BASE SIZE HEIGHT WIDTH WEIGHT SHIPPING WEIGHT SHIPPING BOX SIZE MAX LOAD

132

MODEL 219.07.0114

MODEL 219.07.0175

MODEL 219.07.0180

6” (152 MM) RUBBER 8” X 15 3/4” 41” 22” 7.80 KG. 9.50 KG. 22 1/2”X12”X5”½” 25 KG

8” (203 MM) RUBBER 12” X 21” 42” 28” 20.0 KG. 23.25 KG. 31”X15 1/2”X71/2” 110 KG

14” (355 MM) RUBBER 13” X 25” 44 1/2” 31 1/2” 24.50 KG. 28.50 KG. 34 1/2”X18 1/2”X9” 225 KG

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


219.09.00700

219.09.00706

For M.I.G. Gun Nozzle and Welding Surfaces New Quick Dry Formula, to save time and reduce cost. • Reduces spatter build-up on M.I.G. Nozzles. • Prevents spatter adhesion on surface. • Reduces clean up time. • Heat-resistant to withstand high temperature use. • Non-flammable. • Paint compatible. • Contains no silicones. • Contains no fluorocarbon. • Contains no methylene chloride. • Uses Co2 propellent. • Available in 16 and 24 oz. Aerosols.

ALUMINUM CLEANER & BRIGHTENER 219.09.00704

A ready-to-use cleaner and brightener providing rapid and effortless cleaning and removal of aluminum oxides, grease and dirt from aluminum before welding. Rinse agents provide a "sheeting" action for film-free rinsing. Some heavy accumulations may require some light brushing. Biodegradable.

HTR-30 CHEMICAL HEAT TINT REMOVER 219.09.00703

Very effective in the removal of heat tint and metal discoloration caused by temperatures within the weld zone on stainless steel, especially after TIG welding. Contains hydroflouric acid. Non-flammable.

NOZZLE GEL 219.09.00710

Economical Formula to protect both manual and automatic M.I.G. gun nozzles and M.I.G. gun tips.

SOLVENT CLEANER CRACK CHECK STANDARD 219.09.00705

NONAQUEOUS WET WHITE DEVELOPER CRACK CHECK STANDARD 219.09.00707

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

ANTI-SPATTER & NOZZLE SHIELD

PENETRANT NUCLEAR CRACK CHECK STANDARD P-HF315-1

REMEMBER...

WE HAVE A WIDE VARIETY OF ORNAMENTAL IRON DESIGNS AND ACCESSORIES FOR ALL YOUR PROJECT NEEDS: • RAILINGS • GATES • STAIRS • FENCES • DECORATIVE DESIGNS AND MORE.....

• Safe. • Non-toxic. • Contains no silicones. • Non-flammable. • Odorless. • Contains no hydrocarbon solvents. • 16 oz. Unbreakable container.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

133

© 2010 STEEL AND PIPES, INC.

WELDING LIQUID PRODUCTS


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

DISCS A60S Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)

METAL

SIZE ITEM NUMBER

250.003.007CC

A DIA.

B WIDTH

7

.045

C BORE

5/8

MAX RPM

PART NUMBERS

8,500

23107

A60S

SAIT EZ-CHOP® METAL

Metal studding, thin rebar, light gauge and medium metals SIZE

ITEM NUMBER

250.003.014CC

A DIA.

B WIDTH

14

3/32

C BORE

1

MAX RPM

EZ-CHOP ATTACKER

PART NUMBERS

4,400

24500

STUD KING® METAL

SAITECH STEEL WORKER®

Metal studding, thin rebar, light gauge metals

STAINLESS Stainless steel, high tensile alloys

NON-FERROUS METALS (ALUMINUM) METAL

Non-ferrous metals (aluminum, bronze, brass, etc.) A DIA.

ITEM NUMBER

250.003.012C 250.004.24053 250.004.24052

Ferrous metals (steel, iron, welds, etc.)

METAL

SIZE

12 14 14

B WIDTH

C BORE

3/32 3/32 3/32

1 1 1

MAX RPM

PART NUMBERS S.K.

6,100 4,500 4,500

SAITECH

24030

24053

ALUM.

24052

A24R - LONG LIFE METAL

Ferrous metals (iron, steel, angle iron, etc.) SIZE

250.003.010C

10

B WIDTH

1/8

C BORE

1

OVATION® DESIGN OVATION

24004

A60S

SIZE MAT’L

DIA.

ARBOR

Z

4-1/2 4-1/2 4-1/2

7/8 7/8 7/8

Premium Zirconium

GRIT

PART NO. OVATION

40 60 80

78006 78008 78009

APPLICATIONS Weld grinding and blending, Edge breaking, Deburring, Finishing and blending, Contour finishing

FIBERGLASS BACKING SAITLAM UK™ (CONICAL SHAPE - TYPE 29) © 2010 STEEL AND PIPES, INC.

6,100

250.004.78006 250.004.78008 250.004.78009

® SAFETY

134

PART NUMBERS

ITEM NUMBER

• Flap Disc Configuration • Control • Fiberglass Backing • Adhesive System

MAX RPM

ITEM NUMBER

250.003.4540 250.003.4550 250.003.4560 250.003.4580 250.003.45120 250.004.73716 250.004.73717

SIZE MAT’L

Z

A DIA.

Zirconium

ITEM NUMBER

DIA.

ARBOR

4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 7 7

7/8 7/8 7/8 7/8 7/8 7/8 7/8

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

GRIT

40 50 60 80 120 60 80

PART NO. SAITLAM UK.

73685 73686 73687 73688 73689 73716 73717


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

DISCS ALUMINUM OXIDE WITH GRINDING AID 3A STAINLESS Stainless steel, high tensile steel, titanium

Ferrous and/or non-ferrous metals PART NUMBER

SIZE

ITEM NUMBER

MAT’L

DIA.

250.004.74050 3A 250.004.74051 Aluminium Oxide 250.004.74052 with 250.004.74070 grinding 250.004.74071 aid 250.003.45072

WIDTH

2 2 2 3 3 3

1 1 1 1 1 1

GRIT

60 80 120 60 80 120

1/4

74050 74051 74052 74070 74071 74072

ALUMINUM OXIDE 2A Ferrous and/or non-ferrous metals (iron, steel, aluminum, copper, etc.) Wood, plastic, fiberglass, etc.

METAL WOOD

SIZE

ITEM NUMBER

MAT’L

250.004.72031 250.004.72033

ARBOR

SPINDLE

RPM

6 6

2 2

1 1

6,000 6,000

2A

Premium Aluminium Oxide

CONCRETE METAL

METAL

GRITS WGT.

PART NO.

250.004.84249 250.004.84250 250.004.84254

9 X 11 CW-C

80C 100C 220C

84249 84250 84254

SOFT

MED

5/8

-

95011

HARD

-

RPM

11,000

Non-ferrous metals Wood

WOOD

SIZE

GRADE AVAILABLE PAT NO Max

250.004.95011 *4-1/2

GRAY HAND PADS

ITEM NUMBER

ARBOR

72031 72033

Stainless steel Ferrous and/or non-ferrous metals

METAL

Varnish, plastic, fiberglass, clear coat, primer Marble, ceramics Ferrous and/or non-ferrous metals

SIZE

PART NUMBER

80 120

STAINLESS

BACKING PADS FOR RESIN FIBER DISCS ITEM NUMBER

GRITS AVAILABLE

BLACK HAND PADS

WATERPROOF SHEETS-ULTIMATE PERFORMANCE SILICON CARBIDE (CW-C) WOOD

MAX

DIA.

ITEM NUMBER

SIZE

GRADE

PART NO.

COLOR

250.004.77446 250.004.77448

6x9

Stainless Ultra Fine

77446 77448

Black Gray

SAIT-LOK-R™ BACKING PADS FOR LAMINATED, SURFACE CONDITIONING, & COTTON FIBER DISCS ITEM NUMBER

250.004.95173

SIZE

3”Medium

PART NO

95173

MAX RPM

20,000

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

135

© 2010 STEEL AND PIPES, INC.

METAL


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

DISCS MAROON-NON WOVEN STAINLESS

METAL WOOD

Stainless steel Ferrous and/or non-ferrous materials Fiberglass, gaskets

BLUE-NON WOVEN STAINLESS METAL WOOD

Stainless steel Ferrous and/or non-ferrous materials Fiberglass, gaskets

ITEM NUMBER

250.004.77314 250.004.77315

SIZE

GRADE

3”

Medium Very Fine

PART NO.

COLOR

77314 77315

Maroon Blue

VERY FINE GRADE-NON WOVEN /INTERLEAF WHEELS STAINLESS METAL WOOD ITEM NUMBER

STAINLESS

Aluminum and stainless steel Ferrous and non-ferrous materials Fiberglass

SIZE

250.004.77754 250.004.77756

BLUE-NON WOVEN/HOOK & LOOP

3 x 2 x 1/4 3 x 2 x 1/4

MAX RPM

GRIT

12,000 12,000

120 180

METAL WOOD

PART NO.

GRADE

Very Fine Very Fine

77754 77756

A46N - ALUMINUM ALUMINUM ITEM NUMBER

250.004.20062

Non-ferrous metals (aluminum, copper, brass, etc.) A DIA.

4-1/2

SIZE B WIDTH

1/4

C BORE

7/8

MAX RPM

13,300

PART NUMBERS A46N

20062

XA24Q - CONTAMINANT-FREE STAINLESS METAL

Stainless steel and other high tensile alloys Ferrous metals (iron, steel, welds, etc.)

ITEM NUMBER

A DIA.

SIZE B WIDTH

250.004.24210

4-1/2

1/4

C BORE

7/8

MAX RPM

13,300

PART NUMBERS

ITEM NUMBER

250.004.77122

Stainless steel, high tensile steel Ferrous and/or non-ferrous materials Fiberglass

SIZE

4-1/2”

GRADE

PART NO.

COLOR

Very Fine

77122

Blue

We have all the Safety Equipment that you need for your projects • Gloves • Helmets • Sunglasses • and much more . . .

24210

A24R - LONG LIFE METAL

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER

250.003.004P 250.003.045P 250.003.045PA 250.003.0007P 250.003.0007PA

136

Ferrous Metals (iron, steel, welds, etc.) A DIA.

4 4-1/2 4-1/2 7 7

SIZE B WIDTH

C BORE

1/4 1/4 1/4 1/4 1/4

5/8 7/8 5/8-11 7/8 5/8-11

MAX RPM

13,500 13,300 13,300 8,500 8,500

PART NUMBERS

20013 20063 20163 20080 20086

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

KincoPro ™


UNITIZED TYPE 27 WHEELS-NON-WOVEN

Series 524-Soft Density, Medium Grade, Silicon Carbide Grain Series 732- Medium Density, Fine Grade, Silicon Carbide Grain STAINLESS METAL

Go from a coarse grind finish to a near mirror finish with the Unitized Wheel

Stainless steel, aluminum, high tensile steel Ferrous and/or non-ferrous metals

ITEM NUMBER

SIZE

SERIES

250.004.77875 4-1/2 x 7/8 250.004.77880 4-1/2 x 7/8

524 732

GRAIN DENSITY GRADE

S/C S/C

Soft Medium

MAX RPM

Medium 10,000 Fine 10,000

PART NO.

77875 77880

DEBURRING 9SF-HARD DENSITY METAL STAINLESS

NOTE: Wheels must be run in the direction of the arrow as indicated on the wheel.

Ferrous and non-ferrous materials Aluminum, stainless steel, high tensile materials

ITEM NUMBER

SIZE

SPECS. GRAIN DENSITY GRADE

250.004.77820 6 x 1 x 1

9SF

S/C

Hard

Fine

MAX RPM

PART NO.

6,000

77820

BRUSHES

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

DISCS

LARGE CUP BRUSHES Knot Wire - nut inside

250.004.03407 250.004.03409

DIA.

4 4

SIZE WIRE ARBOR

.020 .020

5/8-11 5/8-11

Crimped Wire - nut inside 250.004.09551 250.004.09553

4 5

.020 .020

5/8-11 5/8-11

ROWS

TRIM LENGTH

MAX RPM

PART NO.

1 1

1-3/8” 1-3/4”

9,000 6,600

03407** 03409***

-

1-1/8” 1-1/2”

9,000 6,600

09551 09553

** nut on outside ***nut on outside in Canada only

250.004.03414 250.004.03419 250.004.01401 250.004.01408

DIA.

SIZE WIRE ARBOR

2-3/4 2-3/4 2-3/4 2-3/4

.014 .014 .014 .014

ITEM NUMBER

250.004.03389 250.004.03391

SMALL CUP BRUSHES ITEM NUMBER

KNOT & CRIMPED WIRE WHEELS

Stringer Bead / Pipeline DIA.

SIZE WIRE ARBOR

6-1/2 .020 6-1/2 .020

5/8-11 5/8-11

MATL TYPE

SB-Stainless SB-Carbon

MAX RPM

9,000 9,000

PART NO.

03389 03391

*302 stainless steel wire used WIRE STYLE

MATL TYPE

5/8-11 Knot Carbon 5/8-11 Knot Stainless* 5/8-11 Crimped Carbon 5/8-11 Crimped Stainless*

MAX RPM

PART NO.

12,500 12,500 12,500 12,500

03414 03419 01401 01408

*302 stainless steel wire used

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

137

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

BRUSHES

SAND-LIGHT™ SURFACE CONDITIONING BACKING PADS • For use with Hook & Loop style Sand-Light™ Discs ITEM NUMBER

250.004.95159

SCRATCH BRUSHES

MAX RPM

ITEM NUMBER

SIZE ROWS

SIZE WIRE

SIZE

PART NO.

250.004.05755

3 x 19

.012

4-1/2 x 5/8-11

95159

4,800

*302 stainless steel wire used

TYPE

CURVED STAINLESS*

PART NO.

05755

The Biggest Distribution Center In The Caribbean We are your Industrial Supermarket!

Caguas

Km 27.5 Road #1, Rio Cañas, Caguas, P.R. T. (787) 747-9415 / 9416 F. (787) 747-8986 / 8987

© 2010 STEEL AND PIPES, INC.

Hato Rey

Calle Francia #467, Hato Rey, P.R. T. (787) 250-8872 F. (787) 250-8871

138

Bayamón

Ave. 29 Sector El Volcán, Bayamón, P.R. T. (787) 778-5990 F. (787) 780-7165

Las Piedras

Carr#183 Km. 20.6, Las Piedras, P.R. T. (787) 912-3000 F. (787) 912-3002

Guayama

Km. 140.4 Carr#3, Guayama, P.R. T. (787) 864-0240 F. (787) 864-2917

Quebradillas

Carr#2 Km. 97 Bo. Cocos, Quebradillas, P.R. T. (787) 291-5000 F. (787) 291-5002

Manatí

Km. 45.6 Carr#2 Bo. Alegre, Manatí, P.R. T. (787) 854-6626 F. (787) 793-4370

Ponce

Bo. Pámpano - Edificio #13 (detrás del Ponce Cash and Carry, antiguo almacén Budweiser), Ponce, P.R.

T. (787) 651-0100 F. (787) 651-0101

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Mayagüez

Km.148.4 Carr#2 El Maní, Mayagüez, P.R. T. (787) 834-0560 F. (787) 834-0590

Río Grande

Bo. Cienaga Baja Carr#3 Km.20.3, Río Grande, P.R. T. (787) 657-1188 F. (787) 657-1191


L

IN

CO

LN E LE C T

Input 1

CC DC

PHASE

50 60 Hz

RI

C

PORTABLE CUTTING POWER UP TO 3/8" The handy Pro-Cut® 25 is ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication. This professional grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy!

Output

PROCESSES

• Air Plasma Cutting • Gouging

UNIT INCLUDES

• PCT 20 Hand Torch, 15 ft. (4.5 m) • Work lead and clamp • Spare consumables • Built-in air pressure regulator with gauge • Input Cord with 115V, 15 amp plug (NEMA 5-15P) • 115V, 20 amp plug

KEY OPTIONS

• K1572-1 Spare Parts Kit for PCT-20 Torches • K2275-1 Welding Cart (80 cu ft. bottle capacity) • K520 Utility Cart (150 cu ft. bottle capacity) • K1625-1 Combination Circle Cutting Kit • K1628-1 Suction Pivot

PRO-CUT ®55

CC DC

Output

Input

1

3

PHASE

PHASE

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PRO-CUT 25 ®

50 60 Hz

IN

CO

LN E LE C T

RI

C

The Pro-Cut 55 is your top choice for industrial plasma cutting for HVAC, sheet metal and light plate fabrication metal working applications. Packed with patented features,the compact Pro-Cut generates 60 amps of cutting power capable of cutting steel up to 3/4” (19.0mm) thick. Its dual winding technology delivers easy starts, lower dross levelsand quick arc transfer rates for fast re-strikes, even on expanded metal. Long-lasting Vortech ™ technology torch consumables concentrate the arc to deliver outstanding efficiency. Patented Parts-in-Place torch design senses when nozzle parts are in the proper position to protect the operator from harm.

L

RUGGED INDUSTRIAL SYSTEM CUTS UP TO 3/4”

PROCESSES

• Air Plasma Cutting • Gouging • PCT 80 Torch • Work lead and clamp • Spare consumables • Built-in air filter and pressure regulator with gauge

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

139

© 2010 STEEL AND PIPES, INC.

BASE UNIT INCLUDES


L

PORTABLE. PROFESSIONAL, RUGGED, AFFORDABLE.

IN

CO

LN E LE C T

CC DC

Input

50 60 Hz

RI

The Invertec® V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec® V155-S is no lightweight contender. It packs the full punch of a heavyweightprofessional that you can take to the most demanding job sites. It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere.

PROCESSES • Stick • DC TIG

UNIT INCLUDES

• Invertec® V155-S (K2605-1). • Stick electrode holder, cable and Twist-Mate™ plug. • Work cable and clamp with Twist-Mate™ plug. • Fully adjustable shoulder strap. • 120/230V input cord, 6.6 ft. (2 m) with a 120V 15 Amp plug. • Extra 120V 20 Amp plug.

KEY OPTIONS

• K2275-1 Welding Cart • K852-25 Twist-Mate™ Cable Plug Kit

INVERTEC® READY PKG. V155-S

Output CC DC

IN

CO

LN E LE C T

Input

1 PHASE

RI

C

L

EASY-STORE / EASY-CARRY SUITCASE

The Invertec® V155-S offers much more than you would expect from a welder this size. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites.It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere. The Invertec® V155-S is available in two models: a base unit with stick accessories or a complete Stick/TIG ready to weld package in an Easy-Store/Easy-Carry Suitcase.

PROCESSES • Stick • TIG

UNIT INCLUDES

© 2010 STEEL AND PIPES, INC.

1 PHASE

C

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

INVERTEC V155-S

Output

®

• Invertec® V155-S • Stick electrode holder and cable with Twist-Mate® plug • Work clamp and cable with Twist-Mate® plug • Shoulder strap • 120/230V input cord with 120V 15 amp plug - 120V 20 amp plug • PTA-17V TIG torch with Ultra-Flex™ cable and Twist-Mate® adapter • PTA-17 Parts Kit • Gas Regulator • Easy-Store/Easy-Carry Suitcase

140

KEY OPTIONS

• K2275-1 Welding Cart • K852-25 Twist-Mate™ Cable Plug Kit • K1782-13 PTA-17FV Flex Head Gas Valve Torch • K1781-7 PTA-9FV Flex Head Gas Valve Torch

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

60 50 Hz

Hz


L

IN

CO

LN E LE C T

CC

Output

CC

AC DC

Input

1 PHASE

60 50 Hz

Hz

RI

C

CODE QUALITY AC/DC TIG WELDING The Invertec® V205-T AC/DC is a compact, TIG power source intended for critical AC or DC TIG welding. The V205-T AC/DC has many new features!

Output

PROCESSES • Stick • TIG

ONE-PAK® PKG. (K2350-2) INCLUDES: • K1855-4 V205-T AC/DC • 230V Input Cord & Plug • Adjustable Shoulder Strap • K870 Foot Amptrol® • K2266-1 TIG Mate™ 17 TIG Torch Starter Kit

KEY OPTIONS

• K2266-1 TIG Mate™ 17 Air-Cooled TIG Torch Starter Pack • K870 Foot Amptrol® • K963-3 Hand Amptrol® • Fume Extraction System

TIG-Mate™ 17 Air-Cooled TIG Torch Starter Kit

PRECISION TIG 225

RECOMMENDED ITEM PAGE: 166

IN

C

N E LE C OL T

AC DC

Input

1 PHASE

60 50 Hz

Hz

RI

C

GREAT FOR MOTORSPORTS AND OTHER CUSTOM FABRICATORS The Precision TIG® 225 gives you the “Power to PerformSM ”, for general fabrication, automotive /motorsports, vocational schools or serious hobby work. Micro-Start™ II Technology delivers precision arc performance to improve arc starting, welding and weld cratering.

L

®

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

INVERTEC V205-T AC/DC ®

PROCESSES • Stick • TIG

READY-PAK® PKG. (K2535-1) INCLUDES:

RECOMMENDED ITEM PAGE: 166 TIG-Mate™ 17 Air-Cooled TIG Torch Starter Kit

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

141

© 2010 STEEL AND PIPES, INC.

• Precision TIG® 225 • Removable Lift Eye • 10 ft. (3.0 m) Work Cable & Clamp • NEMA 6-50R Receptacle (208/230V models only) • TIG Procedure Guide • GTAW (TIG) Handbook KEY OPTIONS • PTA-17 One-Piece TIG Torch • K2266-1 TIG-Mate™ 17 Air-Cooled • Gas Regulator/Hose TIG Torch Starter Pack ® ® • Foot Amptrol Ready-Pak w/Cart Pkg. • K870 Foot Amptrol® (K2535-2) Includes • K963-3 Hand Amptrol® • Everything Listed Above (K2535-1) • K2348-1 Understorage Cart • Understorage Cart • Fume Extraction System


CC

AC DC

1 PHASE

L

PRECISION ARC – MAXIMUM CONTROL

For fabrication, aerospace, production, motorsports or vocational education, Precision TIG® models deliver serious code-level quality. • PATENTED MICRO-START™ II TECHNOLOGY delivers extremely stable low amperage starting, welding and cratering for AC and DC welding. • AC AUTO-BALANCE® automatically sets the optimal cleaning vs. penetration levels for great looking aluminum welds. • WIDEST OUTPUT RANGE in class – 3-340 amps for 275 model and 2-420 amps for 375 model. • HIGHEST DUTY CYCLE – 275 @ 40% for 275 model and 375 amps @ 40% for 375 model. • FREE! BUILT-IN TIG PULSER helps control heat input in the weld to reduce distortion and burn through on thin materials. Optional on 275 model. • NEAT/ORGANIZED CABLE MANAGEMENT with integrated torch holster. • BUILT-IN STORAGE COMPARTMENT with removable tray for torch consumables. • FAN-AS-NEEDED™ (F.A.N.™) prevents overheating. F.A.N.™ reduces power consumption, noise, motor wear and dust in the machine

PROCESSES • Stick • TIG

KEY OPTIONS

PRECISION TIG® 275 WATER-COOLED READY-PAK® W/CART INCLUDES • K2619-1 Precision TIG® 275 • Under-Cooler Cart • Foot Amptrol® • Gas Regulator/Flowmeter/Hose • PTW-20 Pro-Torch™ TIG Torch • Zippered Torch Cover • Parts Kit • Water Hose (2 included) • 15 ft. (4.5 m) 2/0 Work Cable/Clamp • PTA-9 or -17 Torch Adapter

142

IN

CO

50 60

60 Hz

LN E LE C T

Hz

RI

• K2621-1 Advanced Control Panel (275 model only) • K963-3 Hand Amptrol® • K704 Stick Welding Accessory Kit

PRECISION TIG®

© 2010 STEEL AND PIPES, INC.

Input

C

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PRECISION TIG 275 & 375

Output

PRECISION TIG® 375 WATER-COOLED READY-PAK® W/CART INCLUDES

• K2622-1 Precision TIG ® 375 • Under-Cooler Cart • Foot Amptrol® • Gas Regulator/Flowmeter/Hose • PTW-20 Pro-Torch™ TIG Torch • Zippered Torch Cover • Parts Kit • Water Hose (2 included) • 15 ft., (4.5 m) 2/0 Work Cable/Clamp • PTA-9 or -17 Torch Adapter

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


L

Input

1 PHASE

60 50 Hz

Hz

1

60

RI

C

AC GENERAL PURPOSE WELDING Use our popular AC-225 to stick weld mild steel, low alloy and stainless steels as well as cast iron for common repair and hobby projects.

IN

LN E LE C T

PROCESSES • Stick

UNIT INCLUDES

• Insulated electrode holder and cable • Lightweight helmet with lenses • Heavy duty work clamp and cable • Sample pack of electrodes • Helpful Welder’s Guide • Input Cable with integrated plug

KEY OPTIONS

RECOMMENDED ITEM PAGE: 166 K761 Wheel Kit

• K761 Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes.

AC/DC 225/125

Output

L

IN

CO

LN E LE C T

AC DC

Input

PHASE

Hz

RI

C

TACKLE MORE TASKS WITH AC/DC

CC

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

AC-225

Output CC AC CO

Select DC polarity for extremely stable arc action or out-of-position welding with Lincoln Fleetweld® 5P+. Choose AC polarity for welding on heavier plate, greater deposition or faster travel speeds with Lincoln® Fleetweld® 35. Great choice for stick welding on mild steel, low alloy and stainless steels as well as cast iron and hardfacing for maintenance, repair and light fabrication projects.

PROCESSES • Stick • TIG

UNIT INCLUDES

• Insulated electrode holder and cable • Heavy duty work clamp and cable • Helpful Welder’s Guide • Input Cable with integrated plug and receptacle

K761 Wheel Kit

• K761 Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

143

© 2010 STEEL AND PIPES, INC.

KEY OPTIONS

RECOMMENDED ITEM PAGE: 166


L

CO

LN E LE C T

Output

RI

CC

Input

1 PHASE

60 Hz

PROCESSES • Stick • TIG • Gouging

RECOMMENDED ITEM PAGE: 125

KEY OPTIONS

Steel & Pipes Welding Cable

• K704 Accessory Kit, 400 Amp • K930-2 TIG Module • K866-Undercarriage

#1 Flex-a-prene W/lc-40 Male & Af-3 Electrode Holder-10ft. 219.09.00129 Requires adapter Cable Lug TE-2AF 219.09.00153

IDEALARC®DC-400

CC

Output CV

L

INDUSTRIAL DC MULTI-PROCESS WELDERS

IN

C

N E LE C OL T

RI

Rugged construction, simple controls and rated 100% duty cycle output make these machines a sound investment for heavy duty shop applications.

PROCESSES

• Stick • TIG • MIG • Flux-Cored • Submerged Arc • Gouging

KEY OPTIONS DC-400

• K804-1 Multi-Process Switch • K841 Undercarriage DC-600 • K804-1 Multi-Process Switch • K1611-1 Paralleling Kit (for codes above 10500) • K842 Undercarriage DC-655 • K1482-1 Digital Meter Kit • K1528-1 Dual Process Switch • K1611-1 Paralleling Kit • K842 Undercarriage © 2010 STEEL AND PIPES, INC.

AC DC

BASIC INDUSTRIAL STICK WELDING The Idealarc® 250 delivers up to 300 amps AC (250 amps DC) for stick welding in vocational education, industrial production, maintenance and repair or farm shop environments.

C

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

IN

C

IDEALARC 250 ®

144

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

DC

Input

1 3 50 60 PHASE

Hz


L

CO

LN E LE C T

Output CV

RI

DC

Input

1 3 50 60 Hz

PHASE

C

INVERTEC V350-PRO

IN

DESIGNED SMART. BUILT TOUGH. The Invertec® V350-PRO is one of Lincoln's best multi-process welders. Dependent on version, it's capable of Stick, DC TIG, MIG, Pulsed MIG, Flux-Cored and Arc Gouging, making it the most versatile multi-process inverter welder in its class. Aluminum welders especially love the Advanced Process Model for its pulsed MIG welding capabilities, and the V350-PRO Inverter Rack is very popular for multi-operator jobs that require IP23S rating for outdoor use.

PROCESSES

• Stick • TIG • MIG • Pulsed (Advanced Process Panel only) • Flux-Cored • Gouging RECOMMENDED ITEMS PAGE: 125

READY-PAK® PACKAGE (K2437-2) INCLUDES

Steel & Pipes Welding Cable

• V350-PRO Factory Model (K1728-6) • LF-72 Heavy Duty Wire Feeder (K2327-6) •Work & Wire Feeder 2/0 Welding Cable Package, 10 ft. (3.0 m) • Harris® Flowmeter/Regulator w/Adapter and Hose, 10 ft. (3.0 m) • Inverter and Wire Feeder Cart

L

IN

CO

LN E LE C T

RI

www.lincolnelectric.com/green

Output

Input

15-110 24-42 VAC VDC

C

LN-25 PRO

#1 Flex-a-prene W/lc-40 Male & Af-3 Electrode Holder-10ft. 219.09.00129

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CC

®

PORTABLE INDUSTRIAL WIRE FEEDER The LN-25 PRO is designed to be simple, reliable and easy to service. The LN-25 PRO is ideal for field construction and fabrication, shipyards, and rental companies.

PROCESSES • MIG • Pulsed • Flux-Cored

• Internal Contactor • Gas Solenoid • Flowmeter • Arc Sensing Lead & Clip, 15 ft. (4.5m) • 2 Gun Bushings (K1500-2 installed; K1500-1 loose)

RECOMMENDED ITEMS PAGE: 167, 196 Magnum® 300 Gun need connector kit K466-10

Magnum® 400 Gun need connector kit K466-10 Innershield® Gun

Magnum 300

Magnum 400

K126-1 - 10ft. K126-2 - 15ft.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

145

© 2010 STEEL AND PIPES, INC.

LN-25 PRO INCLUDES


L

CO

LN E LE C T

Output

RI

CV DC

Input

PROCESSES

50 60 Hz

®

• MIG • Flux-Cored

UNIT INCLUDES

TM

• Magnum® 250L Gun • Work Clamp and Cable, 10 ft. (3.0 m) • 230V Input Power Cable w/Plug (208/230V model only) KEY OPTIONS • Drive Rolls & Guide for Steel • K466-6 Magnum® Connection Kit • Adjustable Gas Regulator & Hose • K2703-1 POWER MIG® Spool Gun Adapter* • K468 Spindle Adapter for 8 in. O.D. Spools • K1702-1 Dual Cylinder Mounting Kit • K2378-1 Canvas Cover • K2532-1 Magnum® 100SG Spool Gun • K487-25 Magnum® SG Spool Gun • K2490-1 Magnum® 250LX Spool Gun

RECOMMENDED ITEMS PAGE: 168

IN

CO

Spool Gun Ready

Spool Gun Capable

Spool Gun Capable

Magnum 100SG Medium Duty

Magnum SG

Magnum 250LX

MediumDuty

LN E LE C T

Output

CV DC

RI

C

POWER MIG® 255XT

THE PROFESSIONAL’S CHOICE! FOR JOB SHOP FABRICATION The POWER MIG® 255XT sets the standard for MIG and flux-cored welding in industrial production, job shop fabrication, maintenance or repair work. ®

PROCESSES • MIG • Flux-Cored

ONE-PAK® SPOOL GUN PKG. INCLUDES • POWER MIG® 255XT (K2701-1) • Magnum® 250XL Spool Gun • Spool Gun Holder • Dual Cylinder Mounting Kit • Adjustable Gas Regulator & Hose Kit

© 2010 STEEL AND PIPES, INC.

1 PHASE

POWER MIG® THE PROFESSIONAL’S CHOICE! The POWER MIG® 216 offers the autobody and sheet metal fabrication industries top welding performance with a host of professional features.

L

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

IN

C

POWER MIG 216 ®

146

UNIT INCLUDES

• Magnum® 250L Gun •Work Clamp and Cable, 10 ft. (3.0 m) • 230V Input Power Cable w/Plug (208/230V model only) • Drive Rolls & Guide for Steel • Adjustable Gas Regulator & Hose

KEY OPTIONS

• K1702-1 Dual Cylinder Kit • K2378-1 Medium Canvas Cover • K2490-1 Magnum® 250LX™ Spool Gun • K487-25 Magnum® SG Spool Gun • K2445-1 POWER MIG® SG Spool Gun Control Cable Adapter

RECOMMENDED ITEMS PAGE: 168 Spool Gun Ready

Spool Gun Capable

Magnum 250LX Heavy Duty

Medium Duty

Magnum SG

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Heavy Duty

Input

1 PHASE

60 Hz


L

CO

LN E LE C T

Output CV

RI

DC

Input

1 PHASE

50 60 Hz

C

POWER MIG 350MP

IN

THE PROFESSIONAL’S CHOICE! When you want more than just a MIG machine, the POWER MIG® 350MP is the choice for you. Lincoln’s Chopper Technology® delivers more welding processes: Stick, TIG, MIG, Flux-cored, and Advanced Processes such as Power Mode® and Pulse-On-Pulse®.

PROCESSES • Stick • Pulsed • TIG • Flux-Cored • MIG

UNIT INCLUDES

• POWER MIG® 350MP (K2403-1) • Panther™ Push-Pull Gun, 25 ft. (7.6 m) • 3/64 in. Aluminum Drive Roll Kit • Magnum® 300 Gun, 15 ft. (4.5m) • Cable Liner • Contact Tips •Work Clamp and Cable • Adjustable Gas Regulator & Hose

• POWER MIG® 350MP • Magnum® 300 Gun • Work Clamp and Cable • 230V Input Power Cable w/Plug (208/230V model only) • Drive Rolls & Guide for Steel • Adjustable Gas Regulator & Hose

RECOMMENDED ITEM PAGE: 168

KEY OPTIONS

Spool Gun Ready

• K1702-1 Dual Cylinder Kit • K2378-1 Medium Canvas Cover • K2874-2 Panther™ Push-Pull Gun, 25 ft. (7.6 m) • K2490-1 Magnum® 250LX Spool Gun

Magnum 250LX

Heavy Duty

IN

CO

LN E LE C T

RI

C

SP-140T & SP-180T

L

PUSH-PULL ONE-PAK® INCLUDES

Chopper Technology®

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CC

®

Output

CV DC

Input

1 PHASE

60 Hz

SELECT 120 OR 208/230 VOLT AC INPUT COMPACT WIRE WELDERS Choose these great little welders for project or repair welding in your garage, barn or shop using MIG or self-shielded flux-cored wire welding.

PROCESSES • MIG • Flux-Cored

UNIT INCLUDES

• 2 lb. (0.90 kg) Spool of SuperArc® L-56® MIG wire • 1 lb. (0.45 kg) Spool NR®-211-MP • Work Clamp & 10 ft. (3.0 m) Cable • Handshield • Learn-To-Use DVD

RECOMMENDED ITEM PAGE: 168 Spool Gun Ready

KEY OPTIONS

• K2532-1 Magnum® 100SG Spool Gun

Shown: 219.11.K2688-1 SP-140T

Shown: 219.11.K2689-1 SP-180T

Magnum 100SG

Medium Duty

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

147

© 2010 STEEL AND PIPES, INC.

• Magnum® 100L gun 10 ft. (3.0 m) • .025" (0.6 mm) Contact Tips (Qty. 3) • .035" (0.9 mm) Contact Tips (Qty. 3) • Gasless Nozzle for Innershield® • Gas Nozzle for MIG • Spindle Adapter, 8" (203 mm) Dia. Spools • .025"-.030" (0.6-0.7 mm) MIG Drive Roll • .035" (0.9 mm) MIG Drive Roll • .030".-.045" (0.7-1.1 mm) Knurled Drive Roll • Adjustable Gas Regulator & Hose


L

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CO

LN E LE C T

RI

Output

C

BULLDOG™ 140

IN

5.5s

(1)

(2)

kW

Input G

IT’S GREAT FOR HOMEOWNERS AND ANYONE WHO NEEDS PORTABLE AC STICK WELDING AND AC GENERATOR POWER! It’s great for homeowners and anyone who needs portable AC stick welding and AC generator power! Portable AC Welder / AC Generator

PROCESSES • Stick

KEY OPTIONS

• K875 Accessory Kit • K2722-1 Undercarriage • K2819-1 Lift Bail Kit • K2804-1 Canvas Cover • K2471-1 POWER MIG® 140C • K2473-1 POWER MIG® 180C • K2532-1 Magnum® 100SG SpoolGun* *(Requires POWER MIG® 140C or 180C) Spool Gun Ready

Magnum 100SG

Medium Duty

RECOMMENDED ITEM PAGE: 168

OUTBACK®/BULLDOG™ CANVAS COVER To protect your machine when not in use. Made from attractive red canvas material that is flame retardant, mildew resistant and water repellent.

L

IN

CO

LN E LE C T

Output

CC DC 4.7

RI

C

OUTBACK 145 & 185 ®

BUILT FOR THE OUTDOORS! Outback® models are great for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone who needs portable DC stick welding and AC generator power!

PROCESSES • Stick

KEY OPTIONS

© 2010 STEEL AND PIPES, INC.

CC AC

• K875 Accessory Kit • K2793-1 Spark Arrestor Kit (Outback® 185 only) • K2722-1 Undercarriage • K2819-1 Lift Bail Kit • K2804-1 Canvas Cover • K1690-1 GFCI Receptacle Kit (2 Kits Required) • K2471-1 POWER MIG® 140C Spool Gun Ready • K2473-1 POWER MIG® 180C • K2532-1 Magnum® 100SG Spool Gun* *(Requires POWER MIG® 140C or 180C) Magnum 100SG

MediumDuty

148

RECOMMENDED ITEM PAGE:168

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

P

kW

5.7P kW

Input

G


L

IN

CO

LN E LE C T

AC DC

11

Input G

P

kW

RI

C

XTRA PERFORMANCE! XTRA POWER! XTRA PROTECTION!

Output CV

The Ranger® 250 GXT has all of the Xtras you need for construction and maintenance work—250 amps for AC or DC stick and wire welding, 11,000 watts peak AC generator power and Lincoln’s® enclosed case.

PROCESSES • Stick • TIG • MIG • Flux-Cored • Gouging

KEY OPTIONS

• K886-2 Canvas Cover • K930-2 TIG Module • K1737-1 All-Terrain Undercarriage • K704 Accessory Kit, 400 Amp • K857-1 Remote Output Control, 100 ft. (30 m)

L

IN

CO

LN E LE C T

RI

C

RANGER ® 305 D

CC Output CV DC

10

P

kW

Input D

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

RANGER 250 GXT

CC

®

300 AMP DC DIESEL ENGINE-DRIVEN WELDER

For contractors with a diesel fleet, here’s a powerful stick, TIG, wire and pipe welding diesel engine-driven welder. Rugged and dependable, the Ranger® 305 D is built with a totally enclosed case for maximum protection. The 12 gallon (45 L) fuel tank will last the entire day. Lincoln’s® Ranger® 305 D . . . ®

PROCESSES • Stick • TIG • MIG • Flux-Cored • Gouging

ONE-PAK® PACKAGE INCLUDES KEY OPTIONS

• K2635-1 Small 2-Wheel Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • K704 Accessory Kit, 400 Amp • K857-1 Remote Output Control, 100 ft. (30 m)

Chopper Technology THE LINCOLN ELECTRIC GREEN INITIATIVE

Complies to EPA Tier 4i Emissions Standard.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

149

© 2010 STEEL AND PIPES, INC.

• K1727-3 Ranger® 305D • K704 Accessory Kit, 400 Amp • K2613-1 LN™-25 PRO Wire Feeder • K126-2 Gun and Cable • KP1697-068 Drive Roll Kit • .072" NR®-232, 25 lb. Spool


L

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

IN

CO

LN E LE C T

RI

C

VANTAGE 300 & 400 ®

Output

CC CV

DC

12.5P kW

19

P

kW

(2)

Input

D

COMPACT, MULTI-PROCESS, EXCELLENT VALUE

Quiet, compact Vantage® 300 & 400 models are an ideal choice for construction teams, pipe rig owners and rental fleet managers. Select your choice of proven 4 cylinder 1800 RPM diesel engines. • COMPACT CASE with stainless steel enclosure. • LINCOLN’S® CHOPPER TECHNOLOGY® delivers great arc starts and a smooth arc for stick, TIG or wire welding. • MULTI-PROCESS WELDING -Five process modes including: • CC-Stick (3/16 in./4.8 mm with Vantage® 300, 1/4 in. /6.4 mm with Vantage® 400) • Downhill Pipe (for stick) • Touch-Start TIG® DC • CV-Wire (5/64 in./2.0 mm with Vantage® 300, 3/32 in./2.4 mm with Vantage® 400) • Arc Gouging – Carbon sizes up to 1/4 in. (6.4 mm) with Vantage® 300 and 5/16 in. (7.9 mm) with the Vantage®400 • PLENTY OF AC GENERATOR POWER

Chopper Technology®

Vantage® 300 – 12.5 kW peak (11 kW continuous) 3-phase 240V AC – 11.5 kW peak (10 kW continuous) 1-phase 120/240 AC

Vantage® 400 – 19 kW peak (17 kW continuous) 3-phase 240V AC – 12 kW peak (11 kW continuous) 1-phase 120/240V AC • LOW NOISE – As low as 99.1 dBA Lwa sound power (74.8 dB at 23 ft./7m) with Vantage® 400

THE LINCOLNELECTRIC GREEN INITIATIVE

Compliesto EPA Tier 4i EmissionsStandard.

KEY OPTIONS

• K2636-1 Medium Two-Wheel Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • K2627-2 Remote Output Control w/120V AC, 100 ft., 20A capacity

VANTAGE® VANTAGE® 300 READY-PAK® PACKAGE INCLUDES

• Vantage® 300 • Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • Fender and Light Kit • Cable Rack • Cable Connectors (qty. 2) • Electrode Cable 2/0, two 50 ft. (15.3 m) lengths • Electrode Cable 2/0, 10 ft. (3 m) •Work Cable 2/0, 50 ft. (15.3 m) • 300A Electrode Holder • 300A Work Clamp © 2010 STEEL AND PIPES, INC.

(1)

150

VANTAGE® 400 READY-PAK® PACKAGE INCLUDES

• Vantage® 400 • Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • Fender and Light Kit • Cable Rack • Cable Connectors (qty. 2) • Electrode Cable 3/0, two 50 ft. (15.3 m) lengths • Electrode Cable 3/0, 10 ft. (3 m) •Work Cable 3/0, 50 ft. (15.3 m) • 400A Electrode Holder • 500A Work Clamp

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWERCUT® 650 CUTTING PACKAGE • Manually cuts 5/8 in. (15.9 mm) and severs 3/4 in. (19.0 mm)—powerful cutting performance • Economically priced—tremendous cutting value for the money • Compact portable design—goes to the job, easily moved about • Delivers big machine cutting power in a rugged, lightweight package • Arrives ready to cut, with torch connected and front-end parts in place, for the ultimate in operator convenience • Trigger lock-in for long-cut operator comfort • Adjustable output—tailor the current to the material being cut • Compact simple torch—easy access, little maintenance • New, durable torch cable prevents snagging on fixtures and materials • Patented XT nozzles—extended shape gives good visibility as well as good consumable life • Drag or standoff cutting—easy operation with little or no training • Template following feature—easily duplicates curves or straight lines • Tolerates poor power lines • Three-year warranty on console • One-year warranty on torch • Optional Five-year warranty

The PowerCut® 650 comes out of the box ready to go! The torch is attached with parts in place, primary cord is attached and the filter/regulator is installed. Just hook up the air, plug it in and cut.

TORCH • Uses PT-31XLPC

PT-31XLPC

PAGE: 186

SPECIFICATIONS PT-31XLPC

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

151

© 2010 STEEL AND PIPES, INC.

Cuts 5/8 in. (15.9 mm); severs 3/4 in. (19.0 mm) Output: 40% duty cycle ........................................ 40A/120V 60% duty cycle ........................................ 30A/120V 100% duty cycle ...................................... 22A/120V Output Current Range .............................................10 to 40 Amperes Open Circuit Voltage ............................................... 290 Vdc Nominal Input @ 40A/120V ..... 208/230 VAC, 1 ph. 50/60 Hz., 35/32 amps Input @ 40A/120V ....... 230 VAC, 1 Phase, 50/60 Hz, 35/32 Amps Input @ 40A/120V ............ 400 VAC, 3 Phase, 50/60 Hz, 9/6 Amps Input @ 40A/120V ............ 460 VAC, 3 Phase, 50/60 Hz, 8/5 Amps Power factor @ 40A Output ................................................. 76% (1 Phase) Efficiency @ 40A Output ...................................................... 85% (Typical) Air requirements ............................................................. 250 cfh at 80 psig Dimensions: Length ...............................................19.00” (483mm) w/ handles .................................. 25.70” (653mm) Height .............................................. 16.50” (419mm) Width ................................................ 12.50” (318mm) w/ Opt. torch wrap ........................15.50” (394mm) Weight (less torch & work cable) .......................................... 53 lbs. (24 kg)


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION © 2010 STEEL AND PIPES, INC.

POWERCUT® 900 PLASMARC® CUTTING PACKAGE The PowerCut plasma cutting package will take whatever you throw at it, and ask for more. Designed with ESAB Plasmarc technology, PowerCut machines are more powerful and durable than any other machine in their class. They also make plasma cutting easier and more economical - delivering reliability, high production, and a wide variety of performance features. With design features that simplify operations, reduce set-up time and enhance consumable life, PowerCut packages let you spend less time troubleshooting and more time cutting. And with the addition of the PowerCut 900 to the family, the most rugged machines in the industry are more versatile and accessible than ever. • Rugged design – PowerCut’s external housing design is durable, damage-resistant, corrosion-resistant and weather resistant, while remaining lightweight for portability. • Tool-less quick disconnect torch – Disconnects from the machine without the use of wrenches or special tools. Now you can easily disconnect your PT-38 torch for storage, repairs or replacement, or to attach a PT-37 mechanized torch for mechanized applications. • Digital readout display – Easy to read and shows the exact pressure or amperage, so you can operate with confidence. The display also shows help codes to assist in troubleshooting minor errors, reducing downtime. • Blowback technology – Eliminates high-frequency startups that can disrupt CNC controls and nearby computer systems. • Auto-modes (gouge, grate and normal modes) Switch between modes automatically, tailoring your application without manually changing settings on the console. • Suspended electronics – Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration. • Sealed switches – Silicone-sealed switches are immune to corrosion, as well as dust and dirt infiltration. • Gouging capability – PowerCut delivers the extra output voltage needed for superior plasma gouging capability. • Automatic fan control – The cooling fan is automatically controlled to run only when necessary, to conserve energy and reduce ingested dust and dirt. • Built-in power line conditioner – Protects against damage from power line noise and spikes, even with poor-quality power. • Torch wrap and spare parts kit holder – Now standard on all packages, the holder lets you neatly fold up excess torch cables for convenient storage in your consumable box.

• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch

SPECIFICATIONS

Cuts .......................................................................... 7/8 in. (22 mm) Severs ....................................................................1-1/4 in. (32mm) Output: 60% duty cycle .................................................... 60 A Output: 100% duty cycle ................................................... 50A Input phase 1 ................................... 208/230vac, 50/60Hz., 56/47A Input phase 3 ................................... 208/230vac, 50/60Hz., 28/23A Input phase 3 ................................................. 575vac, 50/60Hz., 9A Input phase 3 ............................................... 400vac, 50/60Hz., 13A Input phase 3 ............................................... 460vac, 50/60Hz., 12A Air Requirements: ........ 400cfh @ 80psig (165l/min. @ 4.8-5.2bars) Dimensions: Length .............................................. 25.3 in. (643mm) Height ...............................................14.2 in. (361mm) Width.................................................12.3 in. (312mm) Weight ................................................. 71 lbs. (32 kg)

TORCH • Uses Pt-38 Hand Torch PAGE: 189

PT-38 HAND TORCH PT-38 Hand Torch

• Plug-n-play mechanized option – Lets you easily transform your manual cutting system into a powerful mechanized system for your gantry machine.

152

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWERCUT® 1300 PLASMARC™ CUTTING PACKAGE PowerCut® 1300 makes plasma cutting easier and more economical than ever before, delivering reliability, high production and a wide variety of performance features. With design features that simplify operation, reduce set-up time and enhance consumable life, it lets you spend less time troubleshooting and more time cutting. • Rugged design - Durable external housing design is damage-resistant, corrosion-resistant and weather-resistant, while remaining lightweight for portability • Input voltage selector switch - conveniently located on back of the machine, lets you easily change input voltage from 208 to 460 • Tool-less Quick Disconnect torch disconnects from machine for storage, repairs, or replacement without the use of wrenches or special tools, or to attach a PT-37 mechanized torch

• Switch between gouge, grate and normal modes automatically, tailoring your application without manually changing settings on console • Delivers the extra output voltage needed for superior plasma gouging capability • Torch wrap and spare parts kit holder is standard on all packages • Blowback technology eliminates high-frequency startups that can disrupt CNC controls and nearby computer systems • Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration • Silicone-sealed switches are immune to corrosion and dust and dirt infiltration • Automatic fan control allows cooling fan to run only when necessary – conserves energy and reduces ingested dust and dirt • Built-in power line conditioner protects against damage from power line noise and spikes, even with poor-quality power

• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch

SPECIFICATIONS Cuts 1-1/4 in. (32 mm); severs 1-1/2 in. (38 mm) Output: 60% duty cycle ........................................... 70A (1 ph) 100% duty cycle ......................................... 70A (3 ph) Input 1 phase ................................... 208/230 VAC, 50/60 Hz., 70/60 A Input 3 phase .................................. 208/230 VAC, 50/60 Hz, 36/31 A Input 3 phase ................................... 230/460 VAC, 50/60 Hz, 31/20 A Input 3 phase ............................................... 400 VAC, 50/60 Hz, 18 A Input 3 phase ............................................... 575 VAC, 50/60 Hz, 14 A Air requirements ....... 400 cfh at 80 psig (165 I/min. @ 4.8-5.2 bars) Dimensions: Length ............................................ 27.80” (706 mm) Height .............................................. 14.90” (378 mm) Width ................................................ 12.70” (323 mm) Weight .......................................................................... 90 lbs. (41 kg)

TORCH • Uses Pt-38 Hand Torch PAGE: 189

PT-38 HAND TORCH PT-38 Hand Torch

• Plug N Play mechanized option lets you easily transform your manual cutting system into a powerful mechanized system for your gantry machine

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

153

© 2010 STEEL AND PIPES, INC.

• Digital readout display is easy to read and shows exact pressures or amperage. Display also shows help codes to assist in troubleshooting


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWERCUT® 1600 PLASMARC™ CUTTING PACKAGE PowerCut® 1600 makes plasma cutting easier and more economical than ever before, delivering reliability, high production and a wide variety of performance features. With design features that simplify operation, reduce set-up time and enhance consumable life, it lets you spend less time troubleshooting and more time cutting.

• Rugged design - Durable external housing de-

sign is damage-resistant, corrosion-resistant and weather-resistant, while remaining lightweight for portability

• Input voltage selector switch - conveniently located on back of the machine, lets you easily change input voltage from 208 to 460

• Tool-less Quick Disconnect torch disconnects

from machine for storage, repairs, or replacement without the use of wrenches or special tools, or to attach a PT-37 mechanized torch

• Digital readout display is easy to read and shows

exact pressures or amperage. Display also shows help codes to assist in troubleshooting

• Switch between gouge, grate and normal modes automatically, tailoring your application without manually changing settings on console

• Delivers the extra output voltage needed for superior plasma gouging capability

• Torch wrap and spare parts kit holder is standard on all packages

• Blowback technology eliminates high-frequency

startups that can disrupt CNC controls and nearby computer systems

• Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration

• Silicone-sealed switches are immune to corrosion and dust and dirt infiltration

• Automatic fan control allows cooling fan to run only when necessary – conserves energy and reduces ingested dust and dirt

• Built-in power line conditioner protects against

© 2010 STEEL AND PIPES, INC.

damage from power line noise and spikes, even with poor-quality power

• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch

SPECIFICATIONS Cuts 1-1/2 in. (38 mm); severs 1-3/4 in. (44 mm) Output: 40% duty cycle .......................................90A (1 ph) 60% duty cycle .......................................90A (3 ph) Input 1 phase ..........................................230 VAC, 50/60 Hz., 78 A Input 3 phase ...............................208/230 VAC, 50/60 Hz, 47/41 A Input 3 phase ...............................230/460 VAC, 50/60 Hz, 41/25 A Input 3 phase ...........................................400 VAC, 50/60 Hz, 26 A Input 3 phase ...........................................575 VAC, 50/60 Hz, 11 A Air requirements ......400 cfh at 80 psig (165 I/min. @ 4.8-5.2 bars) Dimensions: Length ..........................................27.80” (706 mm) Height ...........................................14.90” (378 mm) Width ............................................12.70” (323 mm) Weight ........................................................................90 lbs. (41 kg)

TORCH • Uses Pt-38 Hand Torch PAGE:189

PT-38 HAND TORCH PT-38 Hand Torch

• Plug N Play mechanized option lets you easily

transform your manual cutting system into a powerful mechanized system for your gantry machine

154

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


AC DC

1

Input

PHASE

PORTABLE SOLUTIONS FOR PROFESSIONAL TIG & STICK WELDING • Unparalleled performance in a mobile machine for a wide range of TIG and Stick welding applications • Designed for quality TIG welding with all types of metals • Extremely easy to use – all welding parameters displayed in an easy-to-understand format • Innovative QWave™ feature – enables AC welding with exceptional arc stability and low noise • AC frequency and balance control (available with TA34 AC/DC) – optimizes weld pool • Electrode preheating (available with TA34 AC/DC) – facilitates excellent starts and extends electrode life • ESAB 2-Program function – allows pre-programming and program changes during welding • DC Pulsed TIG welding (available with TA34 AC/DC) – for easy control of heat input and weld pool • DC Micro Pulse (available with TA34 AC/DC) – minimizes area affected by heat, particularly when working with thin metals • Hot start, Arc force and polarity switch (DC) – create true MMA (Stick) characteristics in AC and DC mode • Equipped with large OKC 50 cable connectors – for greater durability • Features compact design with impact resistant polymer and aluminum casing – makes the unit lightweight and easy to carry • Small size does not compromise vital cooling of internal components • Large heat sinks and innovative design make these Caddy™ machines run cooler – promotes longer machine life even when used in harsh environments • Designed to keep sensitive interior parts clean and dust free • Built in accordance with IP23 for outdoor use, even in wet-weather conditions – makes this machine ideal for on-site work • Equipped with a PFC (Power Factor Correction) circuit – allows the machine to perform a full range of functions on a 16 A fuse, protects against fluctuating mains voltage, and makes it safer to use with a generator

OPTIONS

CoolMini cooling unit ..................................................0460144880 2-wheel Trolley, small gas bottle..................................0459366885 2-wheel Trolley, gas bottle in front ..............................0459366886 2-wheel Trolley, gas bottle on side ..............................0460330880 Remote control AT 1 CAN.............................................0459491883 Remote control AT1 CoarseFine CAN...........................0459491884 Remote control MTA1 CAN ..........................................0459491880 Remote control T1 Foot CAN........................................0460315880 Remote interconnection cables: 16.5 ft. (5m) CAN..........................................................0459554880 33 ft. (10m) CAN...........................................................0459554881 49 ft. (15m) CAN ..........................................................0459554882 82 ft. (25m) CAN ......................................................... 0459554883

TIG TORCHES

TXH™ 250w 13 ft. (4m).............................................. 0460013840 TXH™ 250wF 13 ft. (4m).............................................. 0460013841 TXH��� 200 13 ft. (4m)...................................................0460012840 TXH™ 200 F 13 ft. (4m)................................................0460012842 TXH™ 250wr 13 ft. (4m).............................................. 0462013840 TXH™ 250wrFr 13 ft. (4m)........................................... 0462013841 TXH™ 200r 13 ft. (4m)................................................. 0462012840 TXH™ 200 Fr 13 ft. (4m)...............................................0462012842 Accy Kit for TXH 200.............................................................999126 Accy Kit for TXH 250w..........................................................999127 Remote adapter kit, includes holder for remote models................................0459491912

SPECIFICATIONS Mains voltage V/ph Hz Fuse (slow), A Maximum Output 20% duty cycle, TIG, A/V 60% duty cycle, TIG, A/V 100% duty cycle TIG, A/V Setting range TIG AC/DC Setting range MMA Open circuit voltage, V DC Power factor at 100%, TIG mode Efficiency at 100%, TIG mode Enclosure class IP 23 Dimensions LxWxH Weight CoolMini water cooling unit: Cooling capacity, W Coolant volume Maximum flow Maximum pressure, 50/60 Hz Weight Dimensions LxWxH

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CC

CADDY™ TIG 2200I AC/DC 230/1 ph. 50/60 Hz 16 220/18.8 150/16 140/15.6 3-220A 4-160A 70 V 0.99 66% 16.46"x7.40"x13.58" (418x188x345mm) 33.07 lbs (15 kg) 700W/0.264 g.p.m. at 104°F (700W/1 l.p.m. at 40°C) 0.581 gal. (2.2 l) 0.528 g.p.m. (2.0 l.p.m.) 33.4 p.s.i. (2.3 bar) 9.92/14.77 lbs. (4.5/6.7 kg) 16.46"x7.40"x5.39" (418x188x137mm)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

155

© 2010 STEEL AND PIPES, INC.

CADDY™ TIG 2200i AC/DC

Output


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HELIARC® 252/352 AC/DC

Output

AC DC

Input

• Square wave AC output gives superior welding with improved cleaning and lack of rectification • AC wave balance control-allows adjustment from maximum cleaning to maximum penetration • Arc force control-fine tunes arc for stick welding from soft to a high penetration, digging arc • 100% solid state design with no mechanical contactor -eliminates output drift, lowers maintenance and promotes long life • Direct connections for Tig torch and quick lock output cable- for maximum convenience • Adjustable pre flow and post flow gas control-protects weld area and extends tungsten life • 6ft. (1.8m) gas hose and water in let and outlet fittings are factory installed • Protected against over heating and over current • 12 Ready-to-Weld Packages, add shield gas and power to weld

SPECIFICATIONS Rated output @ 40% Duty Cycle, 10 minute base, AC or DC For 208 vac, 60 Hz or 380 vdc 50 Hz, derate output by 10% Output Current Range, AC or DC Open Circuit Voltage (maximum) Net Weight, 60 Hz models Net Weight, 50 Hz models Approximate Shipping Weight, 60 Hz models Approximate Shipping Weight, 50 Hz models Width x Length x Height (both models) Primary input voltage & current at rated load of standard model ( 230(208)/460 vac 1 ph, 60 Hz 230/460/575 vac 1 ph, 60 Hz 220/400 (380-415) vac 1 ph, 50 Hz Primary input voltage & current at rated load of standard model 230/460/575 vac 1 ph, 60 Hz 220/400 (380-415) vac 1 ph, 50 Hz Power Factor @ rated load: Without power factor correction kit With power factor correction kit

Heliarc 252

Heliarc 352

280 amps @ 30 volts

350 amps @ 34 volts

5 - 320 amps 3 - 380 amps 79 vac; 72 vdc 79 vac; 72 vdc 375 lbs. 432 lbs. 415 lbs. 472 lbs. 385 lbs. 442 lbs. 425 lbs. 482 lbs. 18.75 in (46cm) x 32.5 in (83 cm) x 25 in (64 cm) without power factor correction kit) 112(118)/56 amps 152(168)/76 amps 112/56/45 amps 152/76/61 amps 104/57(60-55) amps 153/84(88-81) amps with power factor correction kit 77/38/31 amps 110/55/43 amps 78/40(42-38) amps 112/58(61-56) amps 52% 76%

RECOMMENDED ITEMS PAGE: 174, 176, 177

© 2010 STEEL AND PIPES, INC.

CC

156

HW-18 Torch

HW-26R Torch

HW-20 Torch

Uses HW-18 Torch

Uses HW-26R Torch

Uses HW-20 Torch

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

55% 76%

1 PHASE


Output

CC DC

Input

1 PHASE

• The MiniArc 150 Automatic Primary Select operates on either 110 or 230vac and will automatically configure to the primary input supplied • Designed to provide outstanding welding performance for Touch TigTM and Stick welding • 18 Pound weight - Makes this unit portable and easy to carry directly to the job. • Convenient sturdy plastic case accommodates the Mini Arc, welding cables,Tig torch and other accessories • Direct connections for Tig torch and electrode holder for maximum convenience and easy polarity change • Standard 14 Pin receptacle for remote current control • Tig welding with touch-start ignition selectable from the front panel • Protected against over heating and over current • Small and portable, inverter based • 5 to 150 Amps current range for DC Welding • Continuous current control for easy fine tuning

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MINIARC® 150 APS

• Low current draw

SPECIFICATIONS

MINIARC 150APS

MINIARC 150 APS

Miniarc 150APS Stick Package Includes: • Power Source • 10 Ft. Work Cable W/clamp • 10 Ft. Welding Cable W/electrode Holder • 1# 6013lV Electrodes • Plastic Carrying Suitcase.

115V OPERATING DATA: Output Range (Stick) ........................................ 5A/20V to 85A/23.5V Stick Duty Cycle & Rated Output .............. 100% - 85 amps @ 23.4 V Output Range (Tig) ............................................. 5A/20V to 100A/14V TIG Duty Cycle & Rated Output ............... 100% - 100 amps @ 14.0 V TIG Duty Cycle & Rated Output ............... 60% - 130 amps @ 15.0 V Primary Input Current @ 100% Duty Cycle ......................... 19 Amps Primary Input Current @ 60% Duty Cycle ........................... 26 Amps Open Circuit Voltage (max) ........................................................... 83V

230V OPERATING DATA: Output Range ...................................................... 5A/20V to 150A/26V Stick Duty Cycle ........................................ 110 amps/24.5 V @ 100% Stick Duty Cycle ......................................... 140 amps/25.6 V @ 60% TIG Duty Cycle ........................................... 110 amps/14.5 V @ 100% TIG Duty Cycle ................................................ 150 amps/16 V @ 60% Primary Input Current @ 100% Duty Cycle ......................... 17 Amps Primary Input Current @ 60% Duty Cycle ............................ 23 Amps Open Circuit Voltage (max) .......................................................... 83V Efficiency ..................................................................................... 83% Power Factor .................................................................................... .81 Net Weight ....................................................................... 18 lbs. (9 kg) W x L x H........... 5.75 in. (146mm) x 15 in. (381mm) x 11in. (279mm)

MiniArc 150APS Tig package includes • Power Source, Hw-17v 20ft. • Hw-17 Accessory Kit, • R33-fm580 Reg/flowmeter • 10 Ft. Work Cable W/clamp • 10 Ft. Welding Cable W/electrode Holder • 1# 6013lV Electrodes • Plastic Carrying Suitcase. HW-17 Torch

Uses HW-17 Torch

RECOMMENDED ITEMS PAGE: 172

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

157

© 2010 STEEL AND PIPES, INC.

Primary Input Voltage/Phase .... 115/208/230 vac, 1 ph., 50/60 Hz. Voltage Tolerance ................................................................ +/- 10%


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CADDY™ ARC 151i/201i POWER SOURCE Fifth generation Caddy™ machines feature advanced inverter technology built in – deliver unparalleled performance in a rugged, portable package • Adjustable hot start (A33) makes it easy to strike the electrode – avoids starting problems • Adjustable arc force (A33) sets the intensity of the arc – improves weld quality • ArcPlus™ II (A33) improves welding characteristics and simplifies work – produces better weld quality with less clean up • Equipped with large OKC 50 cable connectors – for greater durability • Features compact design with impact resistant polymer and aluminum casing – makes the unit lightweight and easy to carry • Small size does not compromise vital cooling of internal components • Large heat sinks and innovative design make these Caddy™ machines run cooler – promotes longer machine life even when used in harsh environments • Designed to keep sensitive interior parts clean and dust free • Built in accordance with IP23 for outdoor use, even in wet-weather conditions – makes this machine ideal for on-site work • Equipped with a PFC (Power Factor Correction) circuit – allows the machine to perform a full range of functions on a 16 A fuse, protects against fluctuating mains voltage, and makes it safer to use with a generator • Operates with extra long mains cables – expands working radius

Output

CC DC

Input

HW-17V-2 Torch

Uses HW-17V-2 Torch

RECOMMENDED ITEMS PAGE: 172

SPECIFICATIONS Caddy ™Arc 151i Caddy™Arc 201i

CONTROL PANELS

The advanced Caddy™ A33 features a digital display panel with hot-start and arc force control for fine tuning, MMA or TIG selection, LiveTi™ start, two memory settings and remote control. The Caddy™ A31 features a basic control panel with a single current setting knob, which makes it extremely easy to set.

MMA AND ARCPLUS™ II

© 2010 STEEL AND PIPES, INC.

Caddy™ Arc supplies direct current and allows you to weld most metals including alloy and non alloy steel, stainless steel and cast iron. With the Caddy™ Arc 151i, you can weld most 1/16" – 1/8" dia. electrodes and some 5/32" dia. electrodes. The Caddy™ Arc 201i welds electrodes up to 5/32" dia.

TIG WELDING

To TIG weld with the Caddy™ Arc, all you need is a TIG torch with a gas valve, gas regulator and cylinder of gas. Use scratch-start with the Caddy ™ A31 control panel. The Caddy™ A33 control panel provides Live Tig™ start for electronic control of the start current. You can weld mild steel or stainless steel with or without filler material.

158

Mains voltage V/ph Hz 230/1ph 50/60 Hz Fuse (slow), A 16 Recommended generator size, kVA 10 Permitted load at 104°F (40°C), MMA 25% duty cycle, A/V 150/26 60% duty cycle, A/V 100/24 100% duty cycle A/V 90/23.6 Permitted load at 104°F (40°C), TIG 25% duty cycle, A/V 150/16 60% duty cycle, A/V 120/14,8 100% duty cycle A/V 110/14,4 Setting range MMA (A31), A 8-150 Setting range MMA (A33), A 4-150 Setting range TIG (A33), A 3-150 Open circuit voltage (A31), V 58-72 Open circuit voltage (A33), V 72 Power factor at max. current 0.99 Efficiency at max. current 80 Dimensions LxWxH 16.46"x7.40"x8.19" (418x188x208mm) Weight 17.42 lbs (7.9 kg) Enclosure class IP 23 Application classification S Standards IEC/EN 60974-1

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

230/1ph 50/60 Hz 16 12 170/26.8 130/25.2 110/24.4 220/18.8 150/16.0 110/14.4 -4-170 3-220 -72 0.99 81 16.46"x7.40"x8.19" (418x188x208mm) 18.30 lbs (8.3 kg) IP 23 S IEC/EN 60974-10

1 PHASE


When it comes to exceptional quality, value, and the convenience of one-partnumber ordering, nobody delivers like GENUINE HELIARC®. These Tig Torch Outfits contain everything you need in one easy-to-use package.

TIG TORCH OUTFITS DESIGNED FOR H-252 & H-352 AIR-COOLED OUTFITS PART NO.

HW-17 604622

HW-17, 60 DEG. 25 ft.

16X50

l

HW-26, 75 DEG. 25 ft.

46V29

HW-18, 65 DEG. 25 ft.

948362

HW-20, 75 DEG. 25 ft.

948085

TORCH ACCESSORY KIT, HW-17,18, 26 TORCH ACCESSORY KIT, HW-20

999126 999127

l

R-33-FM-580 REGULATOR/FLOWMETER WATER HOSE, 6 ft.

21557 20633

l

35881

l

781F29

l

COMPONENTS

WORK CABLE & CLAMP w/OKC, 15 ft. GENUINE HELIARC ® TIG WELDING HANDBOOK

WATER-COOLED OUTFITS

HW-26 36678

HW-18 36679

HW-20 604623

l l l l

l l

l

l

l

l

l

l

l

l

l

l

l

TIG TORCH OUTFIT SELECTIONS FOR ALL OTHER POWER SUPPLIES AIR-COOLED OUTFITS PART NO.

HW-17 600991

HW-17, 60 DEG. 25 ft.

16X50

l

HW-17V, 60 DEG. 25 ft.

634706

HW-17RV, 60 DEG. 25 ft.

634706R

HW-17RV-2, 60 DEG. 25 ft.

33814R

HW-17FV, FLEX, 25 ft.

19884

HW-26, 75 DEG. 25 ft.

46V29

HW-26V, 75 DEG. 25 ft.

46V27

HW-26RV-2, 75 DEG. 25 ft.

HW-17V 600992

HW-17RV 36857

HW-17RV-2 600998

WATER-COOLED OUTFITS HW-17FV 600997

HW-26 600993

HW-26V 600994

HW-20 600995

l l l l l l

HW-18, 65 DEG. 25 ft.

948362

HW-20, 70 DEG. 25 ft.

948085

TORCH ACCESSORY KIT, HW-17,18, 26 TORCH ACCESSORY KIT, HW-20

999126 999127

l

R-33-FM-580 REGULATOR/FLOWMETER GAS HOSE, 25 ft.

21557 34V38

l

GAS HOSE, 12-1/2 ft.

40V77

l

l

l

l

l

GAS HOSE, 3 ft.

31504

l

l

l

l

l

l

l

l l l

l

l

l

l

l

l

l l

l

l

l

l

l

l

l

l

l

105Z57

POWER CBL. ADPTR., HW-26

45V62

POWER CBL. ADPTR., HW-18, 20

45V11

WORK CBL., 15 ft. w/CLAMP & LUG

34886

l

l

l

l

781F29

l

l

l

l

l

l

l

l

l

l

l

l

20633

POWER CBL. ADPTR., HW-17

TIG WELDING HANDBOOK

HW-18 600996

l

948128R

WATER HOSE, 6 ft. (2)

HW-26RV-2 600999

l l

l l

l

l

l

l

l

l

l

l

l

l

l

l

l

Sales Literature .......................................... (12-01-2006) ARC-23210

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

159

© 2010 STEEL AND PIPES, INC.

COMPONENTS

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TIG TORCH OUTFITS


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

GAS-COOLED TORCHES RATING@ 50% DUTY CYCLE HW-24

HARD BODY1 W/HFC™

SILICON RUBBER2

60 DEG. HEAD ANGLE

70/75 DEG. HEAD ANGLE

90 DEG. HEAD ANGLE

180 DEG. HEAD ANGLE

FLEX HEAD

WITH VALVE

80 amp

l

HW-90

120 amp

l

l

HW-9

140 amp

l

l

HW-9RV-2

140 amp

l

l

l

HW-9RV

140 amp

l

l

l

HW-9F

140 amp

l

HW-17

150 amp

l

l

HW-17-2

150 amp

l

l

HW-17R

150 amp

l

l

HW-17R-2

150 amp

l

l

HW-17F

150 amp

l

HW-17F-2

150 amp

l

HW-26

220 amp

l

HW-26-2

220 amp

l

HW-26R

220 amp

HW-26R-2

l

WITHOUT VALVE

l l

COMMENTS

l

MINIATURE, ULTRA LIGHT TORCH

l

SMALL, LIGHT WEIGHT TORCH

l

COMPACT, AIR-COOLED VERSION OF HW-20 SEPARATE POWER CABLE & GAS HOSE ROTARY VALVE

l

l

FLEXIBLE HEAD VERSION OF HW-20A

l

l

ROTARY VALVE & SLIDING VALVE AVAILABLE

l

l

SEPARATE POWER CABLE & GAS HOSE

l

l

ROTARY VALVE AVAILABLE

l

l

SEPARATE POWER CABLE & GAS HOSE

l

l

l

FLEXIBLE HEAD VERSION

l

l

l

SEPARATE POWER CABLE & GAS HOSE

l

l

l

POPULAR HEAVY DUTY AIR -COOLED TORCH

l

l

l

SEPARATE POWER CABLE & GAS HOSE

l

l

l

l

CONCENTRIC POWER CABLE

220 amp

l

l

l

l

SEPARATE POWER CABLE & GAS HOSE

HW-26F

220 amp

l

l

l

l

FLEXIBLE HEAD VERSION

HW-26F-2

220 amp

l

l

l

l

l

SEPARATE POWER CABLE & GAS HOSE

WATER-COOLED TORCHES RATING@ 50% DUTY CYCLE

HARD BODY1 W/HFC™

SILICON RUBBER2

HW-20

300 amp

HW-20R

300 amp

HW-18

425 amp

HW-18R

425 amp

l

HW-25F

200 amp

l

HW-27

400 amp

60 DEG. HEAD ANGLE

l

70/75 DEG. HEAD ANGLE

90 DEG. HEAD ANGLE

180 DEG. HEAD ANGLE

FLEX HEAD

WITH VALVE

l l

l

l l

l

l

l

l

l

l

WITHOUT VALVE

COMMENTS

l

COMPACT, HIGH CURRENT TORCH

l

COMPACT, HIGH CURRENT TORCH

l

GENERAL PURPOSE

l

GENERAL PURPOSE

l

FLEXIBLE HEAD, WATER TORCH

l

REAR LOADING MACHINE TORCH

Hard Body Torches with HFC™ (High temperature Fiber reinforced Composite material) provide the best performance, heat resistance, abrasion resistance, and high frequency resistance. 2 Rubber bodies provide improved resistance to breakage in rough duty. 1

© 2010 STEEL AND PIPES, INC.

Notes: 1. ESAB has made a model change on the HW-9 series torches. The new designation for that series of torches is HW-90. 2. ESAB has made a model change on the HW-20A series torches. The new designation for that series of torches is HW-9.

160

OLD DESIGNATION

HW-9 HW-20A HW-20AR HW-20AF HW-20ARV HW-20ARV2

NEW DESIGNATION

HW-90 HW-9 HW-9R HW-9F HW-9RV HW-9RV2

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


• Advanced Super SwitchTM technology makes multi-process welding a breeze. Simplified set up makes it easy to select Mig, Tig, or Stick • DC welding out put from 15 to 300 amps; rated 260 amps at 50% duty cycle • Output pre-set capability for quick set-up • Two digital meters for easy fine tuning • Heavy Duty Four Drive Roll stand • Convenient, large capacity built-in toolbox • Dual “Easy-On” cylinder tray • Pulse Mig capability with optional module • Touch Tig™ Start capability • Fan on demand

SPECIFICATIONS Rated DCCV or DCCC Output (10 min base) 50% duty cycle (NEMA Class I) ........................ 260 amps @ 27 vdc Output Current Range Mig (GMAW) ................................................................ 35-300 amps Tig (GTAW) ......................................................... 10-300 amps Stick (SMAW) ...................................................... 40-300 amps Open Circuit Voltage Mig (MGAW) ............................................................................ 70 vdc Tig (TGAW) .................................................................... 20 vdc Stick (SMAW) ......................................................................... 70 vdc Primary Input Voltage & Current @ 260 amp rated load 208/230 vac, 60 Hz, 1 ph ..................................... 57/52 amps Wire Feed Range .............................. 65-675 ipm (1.6 - 17.3 m/min) Net Weight ........................................................... 250 lbs. (112.5 kg) Shipping Weight .................................................290 lbs. (130.5 kg) W x L x H ..... 25.3 in. (64 cm) x 39.5 in. (100 cm) x 33.5 in. (85 cm)

Output

CV

DC

Input

1 PHASE

Remote Control Option “Spool-on-Gun” Option

Status Indicators

Digital Meter Volts, Amps, and Wire feed speed

Voltage Preset Process Selector Voltage/Current Control

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MULTIMASTER® 260 MULTI-PROCESS PACKAGE INDUSTRIAL READY-TO-WELD

Wire Feed Speed Control

Pulse Module Option Pulse Mig Welding of Carbon Steel, Stainless Steel and Aluminum

RECOMMENDED ITEMS PAGE: 169, 170, 172 Gun Master 250”NAS”

HW-17V-2 Torch

MT-250SG Spool Gun

MT-250SG Spool Gun

Uses HW-17V-2 Torch

Requires spool gun module

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

161

© 2010 STEEL AND PIPES, INC.

Uses Gun Master 250”NAS”


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MULTI POWER® 460 POWER SOURCE • Multi-process, three phase power source designed for heavy duty Industrial DC welding applications. • Use for High Performance Mig, Pulse Mig, Flux Cored wire, Stick electrode welding, Tig and Air Carbon Arc Gouging • SuperSwitch Technology design, provides superior inverter like performance in the welding arc while providing SCR like reliability. • Variable inductance for fine tuning of the arc characteristics in short arc welding. • Built-in arc force control for superior stick electrode performance. • Digital preset of voltage/amperage on all process at the front panel. • Sheet metal parts and hardware made of stainless steel. Top and side panel made of Kydex polymer for superior durability in harsh environments. • Auto Fan™ feature standard in the unit for energy savings. Automatically turns the fan motor on and off when needed. • Energy and power efficient, the best in its class with a 92% efficiency figure. Saves energy and reduces power costs. Uses up to 50% less current than conventional SCR machines. • Convenient 11 5vac auxiliary power receptacle. • Synergic / Non-Synergic Mig Pulse welding capability with the intelligence built into the power source (Standard on pulse unit, optional in the standard unit) Allows you to do Pulse Mig with almost any wire feeder. • 100% Solid State, no mechanical contactor • Compatible with DuraDrive 4-30 and DuraDrive 4-48 wire feeders • Touch Tig™ Start capability

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS Rated DC Output @ 100% Duty Cycle* 50/60Hz, cv or cc ......................................... 450 amps 38 vdc Rated DC Output @ 60% Duty Cycle* 50/60Hz, cv or cc ......................................... 500 amps 39 vdc Welding Range ............................................... 10A/12V to 500A/40V Open Circuit Voltage Max. ...................................................... 80vdc Primary Input Voltage and Current @ 100% DutyCycle 230(208)/460/575vac, 60Hz 3ph .................... 66/33/26 amps Power Factor at Rated Output .................................................. 89% Efficiency at Rated Output ........................................................ 92% Auxiliary Output Power ................................... 115vac 50/60Hz, 10 amps Physical Dimensions W x L x H ........ 18.8 in. (483mm) x 32.5 in. (819mm) x 25 in. (622mm) Net Weight .............................................................. 322 lbs.(146 Kg) Shipping Weight ..................................................... 375 lbs. (170Kg) * For 208 vac, 60 Hz service derate output current rating 10%.

162

Output

CC CV

Input

Voltage/Current Control Standard Control Panel

KEY OPTIONS

• 0558002671 -Pulse Option Mp460 • 0558002871 -MP 460 Remote Pendant 30ft • 37924 -TR-29 Truck Kit, 2 Cylinder • 36172 -SWIVEL POST ADPT 353/453/653 • 0588001197 –MP 460 115V Feeder Option • 0558006581 –Output Terminal Boot

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

3 PHASE

Process Selector

Digital Meters

Status Indicators

DC

Inductance control


MULTIMASTER 300

Output

DC

CC CV

3

Input

PHASE

READY-TO-USE WELDING PACKAGES

• Advanced SuperSwitch technology • DC welding output from 15 to 300 amps; rated at 40% duty cycle • Variable inductance control • Output pre-set control with two digital meters for quick setup • 250-amp torch for wires .035 in. (0.9 mm) and .045 in. (1.2 mm) diameter • Heavy-duty, four-drive roll stand with v groove drive rolls • Convenient built-in toolbox • Dual “easy-on” cylinder tray • Compatible with the Marathon Pak • AutoFan®

APPLICATIONS

• General fabrication and civil construction • Repair and maintenance • Power generation • Agriculture • Automotive • Pipe welding

TECHNICAL DATA

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

®

RATED DCCV OR DCCC OUTPUT (10 MIN BASE) 40% duty cycle (NEMA Class 1) Output current range: MIG/Fluxcore (GMAW/FCAW) Output current range: TIG (GTAW) Output current range: Stick (SMAW) Open circuit voltage: MIG/Fluxcore (GMAW/FCAW) Open circuit voltage: TIG (GTAW) Open circuit voltage: Stick (SMAW) Primary input voltage and current @ 300 A rated load 208/230 VAC, 60 Hz, 1 ph Wire feed range Shipping weight Dimensions L x W x H

300 A @ 32 vdc 35-300 A 10–300 A 40–300 A 70 vdc 20 vdc 70 vdc 66/60 A 65–675 in./min (1.6–17.3 m/min) 300 lbs (136 kg) 39.5 x 25.3 x 33.5 in. (1000 x 640 x 850 mm)

RECOMMENDED ITEMS* PAGE: 169, 172 HW-17V-2 Torch

MT-250SG Spool Gun

MT-250SG Spool Gun

Uses HW-17V-2 Torch

Requires spool gun module

ST-23A Spool Gun

FC-5C Foot Control # 0558 004 234

Electrode Holder

ST-23A Spool Gun

FC-5C Foot Control – 30 ft. (9.1 m) Cable

Assembly – 300 A, 15 ft. (4.5 m)# 21226 Includes holder, cable, and quick connector.

Requires 37301 adapter

requires remote control module.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

163

© 2010 STEEL AND PIPES, INC.

*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MIGMASTER® 215 PRO/280 PRO

Output

CV

COMPACT STRENGTH AND MOBILITY.

•2/4 stroke – simplifies welding •Creep start – gradual feed of wire for ultimate starts •Adjustable wire feed speed •Adjustable burnback timer – gives correct stick-out •Spot welding timer •Equipped with V/A digital meter •Outstanding welding characteristics – efficient, high-quality welding •Wide current and voltage range – multi-purpose applications •Sturdy, galvanized metal casing with air filter (optional)

APPLICATIONS

•Auto-repair •Metal fabrication •Transportation •Household and furniture •Tack welding

TECHNICAL DATA

Migmaster 215 Pro

INPUT VOLTAGE

208/230 VAC, 1 ph, 60 Hz 208/230 VAC, 1 ph, 60 Hz 230/460/575 VAC, 1 ph, 60 Hz 230/460/575 VAC, 1 ph, 60 Hz 53 A/48 A 74 A/66 A 53 A/26 A/21 A 66 A/34 A/26 A 250 A/23 V X X 300 A/29 V 160 A/22 V 250 A/26.5 V 110 A/19.5 V 194 A/23.7 V 40 A/16 V–250 A/23 V 40 A/16 V–300 A/29 V 0.95 0.97 76% 71% 75–700 in./min. 55–770 in./min. 0–0.25 sec. 0–0.25 sec. 0.2–2.5 sec. 0.2–2.5 sec. Selectable Selectable Migmaster 215 Pro Migmaster 280 Pro 12 21 33 x 16.7 x 32.7 in. (840 x 425 x 830 mm) 32 x 22 x 36.5 in. (840 x 552 x 925 mm) 216 lb (98 kg) 308 lb (140 kg) 14 to 104°F (-10 to +40°C) 14 to 104°F (-10 to +40°C) IP 23 S IP 23 S .023–.045 in. (0.6–1.2 mm) .047 in. (1.2 mm) .023–.045 in. (0.6–1.2 mm) .030–.045 in. (0.8–1.2 mm)

INPUT CURRENT @ 250 A 25% DC PERMITTED LOAD AT 20% DUTY CYCLE PERMITTED LOAD AT 40% DUTY CYCLE PERMITTED LOAD AT 60% DUTY CYCLE PERMITTED LOAD AT 100% DUTY CYCLE SETTING RANGE (DC) POWER FACTOR AT MAXIMUM CURRENT EFFICIENCY AT MAXIMUM CURRENT WIRE FEED SPEED BURNBACK TIME SPOT WELDING TIME CREEP START VOLTAGE STEPS DIMENSIONS L X W X H WEIGHT OPERATING TEMPERATURE ENCLOSURE CLASS WIRE DIMENSIONS: STEEL ALUMINUM STAINLESS CORED-WIRE

Migmaster 280 Pro

RECOMMENDED ITEMS* PAGE: 169 Air Filter

ST-23A Spool Gun

Cable and Torch Holder

MT-250SG Spool Gun

ST-23A Spool Gun (requires 37301 adapter)

Cable and Torch Holder

MT-250SG Spool Gun

Air Filter

© 2010 STEEL AND PIPES, INC.

DC

Cleanable/reusable optional filter.Extends time between required maintenance and protects components in harsh environments.

*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.

164

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Input

1 PHASE


Output

CV

DC

Input

1 PHASE

• Rated 250 amp sat 50% duty cycle • DC welding output from 30 to 280 amps (24 ga>1/2") • 24 overlapping heat (voltage) steps for accurate fine tuning • Feeds wire from 20 to 650 ipm; pulse width modulated, solid state speed control • Built-in spool-on-gun control

SPECIFICATIONS Rated DCCV Output (10 min base) 50% duty cycle, 60 Hz Input .................... 250 amps @ 27 vdc 60% duty cycle (NEMA Class I), 60 Hz Input .... 225 amps @ 29 vdc 40% duty cycle, 50 Hz Input .................... 250 amps @ 27 vdc Output Current Range .................................................. 30-280 amps Open Circuit Voltage ................................................................ 55 vdc Primary Input Voltage & Current @ 250 amp rated load, 50/60 Hz, 1 phase 208/230/380/400/460/575 vac ..... 71/62/37/36/31/25 amps Wire Feed Range ............................... 20-650 ipm (0.5-16.3 m/min) Net Weight ................................................................ 210 lbs. (95 kg) Shipping Weight ..................................................... 220 lbs. (100 kg) W x L x H ...... 19.5 in. (50 cm) x 40 in. (102 cm) x 32.25 in. (82 cm)

RECOMMENDED ITEMS PAGE: 169, 170 Gun Master 250”NAS”

MT-250 SG Spool Gun

Gun Master 250”NAS”

(Optional) MT-250 SG Spool Gun Requires Spool Gun adapter

MIGMASTER® 275 COMPACT

Output

CV

DC

Input

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

INDUSTRIAL READY-TO-WELD MIG PACKAGE MIGMASTER® 250

1 PHASE

MORE POWER FOR THOSE TOUGH JOBS

• Rated 275 amps at 40% duty cycle - 200 amps continuous 100%. • DC welding output from 30 to 300 amps - new heavy plate parameters 5/8" and above. • 24 overlapping heat (voltage) steps for accurate fine tuning. • Flat and Slope taps for accurate fi ne tuning of short arc parameters for reduced spatter. • Feeds wire from 40 to 750 ipm; pulse width modulated, solid state speed control • Solid State contactor control for high reliability under repetitive short cycle welds. • Toolless polarity change • NAS gun connection with built-in torch wrap. • Built-in spool-on-gun control.

SPECIFICATIONS

RECOMMENDED ITEMS PAGE: 169, 170 Gun Master 250”NAS”

MT-250 SG Spool Gun

Gun Master 250”NAS”

(Optional) MT-250 SG Spool Gun Requires Spool Gun adapter

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

165

© 2010 STEEL AND PIPES, INC.

Rated DCCV Output (10 min base) 100% duty cycle, 60 Hz Input ............................200 amps @ 27 vdc 60% duty cycle (NEMA Class I), 60 Hz Input ... 250 amps @ 29 vdc 40% duty cycle, 50 Hz Input .............................275 amps @ 27 vdc Output Current Rang .............................................................30-280 amps Open Circuit Voltage ..............................................................55 vdc Primary Input Voltage & Current @ 250 amp rated load, 50/60 Hz, 1 phase 208/230/380/400/460/575 vac ................71/62/37/36/31/25 amps Wire Feed Range .......................................20-750 ipm (0.5-16.3 m/min) Net Weight .....................................................................210 lbs. (95 kg) Shipping Weight ............................................................220 lbs. (100 kg) W x L x H ..............19.5 in. (50 cm) x 40 in. (102 cm) x 32.25 in. (82 cm)


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

ORIGO™ FEED 3004 MA23

WITH MIG 4002C/5002C/6502C POWER SUPPLY

CC CV

DC

Output

Input

3 PHASE

FEEDER FEATURES

• Quick connectors – reduces setup times • Meets IEC 60974-5 safety standard with low voltage (42 VAC) operations and overload protection circuit to help eliminate breakdowns • TrueArcVoltage™ system – measures the correct arc voltage value independent of the length of the connection cable, return cable, or welding torch • Can be equipped with a counterbalance device, lifting eye, or wheel kit for increased mobility • Efficient hot-start and crater-fill functions for smooth starts and ends • Continuous adjustable inductor

POWER SOURCE FEATURES

PANEL (MMC) FUNCTIONS

•Multi-voltage – ready to work anywhere •Sleep mode saves power •Outstanding arc across total power range •Robust power technology •Dust filter to prevent grinding-dust and metal particles from entering the chassis (optional)

•Process select •2/4 stroke – simplifies handling of the welding torch •Gas pre/post flow •Digital V/A meters •Gas purge/wire inching •Memory for 3-parameter set

APPLICATIONS

•Civil construction •Mobile machinery •Foundries •General FAB •Pipe workshops •Ship and offshore yards •Transportation •Energy

FEEDER DATA POWER SUPPLY

WIRE SPOOL CAPACITY

MAX. SPOOL DIAMETER

WIRE FEED SPEED

DIMENSION (L X W X H)

WEIGHT, ENCLOSED

WIRE DIMENSIONS

42 VAC, 50/60 Hz

39 lb (18 kg)

12 in. (300 mm) (enclosed)

32-1000 in./min (0.8-25.0 m/min)

27.1 x 10.8 x 16.1 in. (690 x 275 x 420 mm)

33 lb (15 kg)

Steel Stainless steel Aluminum Cored wire

WEAR PARTS WIRE DIAMETER (IN.)

© 2010 STEEL AND PIPES, INC.

.023 / .030 .030 / .035–.040 .035–.040 / .045* .052 / .063

WIRE TYPE Fe, Ss, C Fe, Ss, C Fe, Ss, C Fe, Ss, C

1 FEEDER ROLLER

2 INLET NOZZLE

3 INTERMEDIATE NOZZLE

4 OUTLET NOZZLE

.023–.062 in. (0.6–1.6 mm) .023–.062 in. (0.6–1.6 mm) .040–.062 in. (1.0–1.6 mm) .030–.062 in. (0.8–1.6 mm)

GROOVE TYPE

MARKING

0459 052 001 0459 052 002 0459 052 003 0459 052 013

0455 049 001 0455 049 001 0455 049 001 0459 049 001

0455 072 002 0455 072 002 0455 072 002 0455 072 002

0469 837 880 0469 837 880 0469 837 880 0469 837 880

V V V V

0.6 S2 & 0.8 S2 0.8 S2 & 1.0 S2 1.0 S2 & 1.2 S2 1.4 S2 & 1.6 S2

.035–.040 / .045 .045 / .052 .063

C C C

0458 825 001 0458 825 002 0458 825 003

0455 049 001 0455 049 001 0459 049 001

0455 072 002 0455 072 002 0455 072 002

0469 837 880 0469 837 880 0469 837 880

V-K V-K V-K

1.0 R2 & 1.2 R2 1.2 R2 & 1.4 R2 1.6 R2

.030 / .035–.040 3/64 / .062

Al Al

0458 824 001 0458 824 003

0455 049 001 0455 049 001

0456 615 001 0456 615 001

0469 837 881 0469 837 881

U U

0.8 A2 & 1.0 A2 1.2 A2 & 1.6 A2

C = cored wire

166

* as delivered

K = knurled groove

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER SOURCE DATA 4002c

5002c

6502c

MAINS VOLTAGE PERMITTED LOAD AT 60% DUTY CYCLE PERMITTED LOAD AT 100% DUTY CYCLE

400 A / 34 V

500 A / 39 V

650 A / 44 V

310 A / 30 V

400 A / 34 V

500 A / 39 V

SETTING RANGE (DC) MIG/MAG

16–400 A / 8���60 V

16–500 A / 8–60 V

16–650 A / 8–60 V

SETTING RANGE MMA OPEN CIRCUIT VOLTAGE GMAW/FCAW (MIG/MAG)

16–400 A

16–500 A

16–650 A

62 V

62 V

62 V

OPEN CIRCUIT VOLTAGE SMAW (MMA) OPEN CIRCUIT POWER

68 V 500 W

68 V 550 W

68 V 670 W

IN ENERGY SAVING MODE, 15 MIN. AFTER WELDING POWER FACTOR AT MAXIMUM CURRENT

60 W

60 W

60 W

0.88

0.90

0.90

EFFICIENCY AT MAXIMUM CURRENT

70%

72%

76%

CONTROL VOLTAGE DIMENSIONS LXWXH WEIGHT

42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 328 lb (149 kg)

42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 407 lb (185 kg)

42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 489 lb (222 kg)

WEIGHT WITH COOLING UNIT

359 lb (163 kg)

438 lb (199 kg)

520 lb (236 kg)

OPERATING TEMPERATURE ENCLOSURE CLASS

14 to 104°F (-10 to 40°C) IP 23

14 to 104°F (-10 to 40°C) IP 23

14 to 104°F (-10 to 40°C) IP 23

--------------230/400–415/500 V, 50 Hz ----- 230/430–460 V, 60 Hz-----------------

CONNECTION CABLE SETS

5.5 ft. (1.7 m) air-cooled torch, 10 pole..................................... 0349 312 450 16.4 ft. (5.0 m) air-cooled torch, 10 pole................................... 0349 312 451 32.8 ft. (10.0 m) air-cooled torch, 10 pole................................. 0349 312 452 49.2 ft. (15.0 m) air-cooled torch, 10 pole ................................ 0349 312 453 82.0 ft. (25.0 m) air-cooled torch, 10 pole................................. 0349 312 454 114.8 ft. (35.0 m) air-cooled torch, 10 pole............................... 0349 312 455 Includes: control cable, electrode cable, and gas hose.

TORCHES

Gun Master 400cc 25 ft. (7.6 m) Basic...................................... 0558 001 674 Gun Master 400cc 10 ft. (3 m) x .035–.045 in.......................... 0558 001 665 Gun Master 400cc 12 ft. (3.6 m) x .035–.045 in....................... 0558 001 667 Gun Master 400cc 15 ft. (4.5 m) x .035–.045 in. ..................... 0558 001 669 Gun Master 400cc 15 ft. (4.5 m) x .052–1/16 in....................... 0558 001 670

RECOMMENDED ITEMS* Electrode Holder

Cable and Torch Holder

Air Filter

Power Source Strain Relief for Connection Cables

Air Filter

Cable and Torch Holder

Power Source Strain Relief for Connection Cables # 0349 311 700 Recommended when moving power supply frequently and use of long connection sets.

*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

167

© 2010 STEEL AND PIPES, INC.

Assembly – 300 A, 15 ft. (4.5 m)# 21226 Includes holder, cable, and quick connector.

# 0349 302 252 Cleanable/reusable optional filter.Extends time between required maintenance and protects components in harsh environments.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TIG ACCESSORIES FOOT AMPTROL®

Provides 25 ft. (7.6 m) of remote output control for TIG welding. (6-pin plug connection). Order K870

TIG MODULE

Portable, high frequency unit with gas valve for TIG welding. Rated at 300 amps/60% duty cycle. Order K930-2

COOL ARC® 40 WATER COOLER

Reliable and affordable water cooler for water-cooled MIG, TIG, or plasma cutting applications. Order K1813-1 for 115/1/50/60 Order K2187-1 for 220-240/1/50/60

CONTACTOR KIT

Installs in the K930-2 TIG Module for use with welders without a contactor. Makes the TIG torch electrode electrically “cold” until the Amptrol® is activated. Order K938-1

HAND AMPTROL®

Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection). Velcro straps secure it to the torch. Order K963-3 (One size fits all Pro-Torch™ TIG Torches.)

TIG-MATE™ 17 AIR-COOLED TIG TORCH STARTER PACK Includes Ultra-Flex™ Torch!

© 2010 STEEL AND PIPES, INC.

UNDERCARRIAGES AND CARTS

Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes. Order K761 for AC-225, AC/DC-225/125

168

Get everything you need for TIG welding in one complete easy-to-order kit packaged in its own portable carrying case. Includes: PTA-17 Ultra-Flex™ torch, parts kit, Harris® flowmeter/regulator, 10 ft. (3.0 m) gas hose, Twist-Mate™ adapter, and work clamp and cable. Order K2266-1

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


MAGNUM MIG GUNS

MAGNUM® 100L GUN AND CABLE

Assembly Extremely small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications. Standard equipment on current Lincoln SP-140T and SP-180T, Power MIG® 140C, and 180C. Includes gun connector. Order K530-5

MAGNUM® 250L GUN AND CABLE ASSEMBLY

Recommended for medium duty job shop and production applications. Standard equipment on the current Lincoln Power MIG 216 and Power MIG® 255XT wire feeder/welders. Includes gun connector. Order K533-7

WIRE DIAMETER .025-.035IN.(0.6-0.9MM)

WIRE DIAMETER .035-.045IN.(0.9-1.2MM)

CABLE LENGTH 10 (3.0)

Magnum® 250L

12 (3.6) 15 (4.5)

K533-7 (FixedGas Nozzle) K533-3 (Adjustable Gas Nozzle)

Magnum® 300

10 (3.0) 12 (3.6) 15 (4.5) 10 (3.0) 12 (3.6) 15 (4.5)

K470-1 K470-7 K470-2 K471-1 K471-7 K471-2

Magnum 400 DUALSCHEDULE Magnum® 400 DUALPROCEDURE Magnum® 400 SHORT NECK

WIRE DIAMETER .052-1/16 IN.(1.3-1.6MM)

WIRE DIAMETER 1/16-5/64 IN.(1.6-2.0MM)

OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE

GUN TYPE

®

Lightweight, Quick and Agile — All The Muscle Without the Bulk! 400amp, Short Neck, 15 ft. Length Heavy Duty Expendable Parts Order K574-1

This popular Magnum gun is intended for most.035–.045 in. wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG® 350MP wire feeder/welder. Order K470-1

Magnum® 100L

Magnum® 400 STANDARD

MAGNUM® 400 GUN AND CABLE ASSEMBLY

MAGNUM® 300 GUN AND CABLE ASSEMBLY

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

WELDING GUNS

K530-5 K530-6 (1)

K530-3 (FCAW-SSonly)

20 (6.1) 25 (7.6) 15 (4.5) 25 (7.6)

K574-1 K574-4

10 (3.0) 15 (4.5) 25 (7.6) 10 (3.0) 15 (4.5)

K1722-2 K1722-3 K541-1 K541-3

K478-1 K478-2 K479-7 K479-2

K1802-1(2)

K2286-1(2) K471-21(3)

K575-1

K470-4

K478-3

K471-8 K471-4

K479-4

K471-11 K471-14 K574-2

K575-2

K470-6

K471-22(3)

K471-6

K479-6

K471-23(3)

K471-15

K1723-1 K1723-2 K541-23(2)

(1)

Includes 4-pin MS-Typeconnection for trigger control Includes K466-1 ConnectorKit (3) Includes K466-10 ConnectorKit

GUNTYPE Magnum® 550

CABLE LENGTH FT.(M) 10 (3.0) 12 (3.6) 15 (4.5) 25 (7.6)

WIRE DIAMETER .035-.045IN.(0.9-1.2MM) GUN CONNECTOR 600A OPEN-END — — — K598-4

WIRE DIAMETER .052-1/16 IN.(1.3-1.6MM) GUN CONNECTOR 600A OPEN-END 500A OPEN-END K598-5 K598-6 K598-7 —

— — K598-16 —

WIRE DIAMETER 5/64-3/32 IN.(2.0-2.4MM) GUN CONNECTOR 600A OPEN-END 500A OPEN-END — — K598-11 —

— — K598-17 —

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

169

© 2010 STEEL AND PIPES, INC.

(2)


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

SPOOL GUNS

MAGNUM® SG SPOOL GUN

The Magnum® SG – a lightweight, well balanced semiautomatic spool gun designed for easy and reliable aluminum wire feeding with a variety of CV power sources and engine-driven welders. Rated 250 amps @ 60%, the Magnum® SG features a generous 25 ft (7.5 m) gun cable and integrated wire feed speed control in the handle to cut your trips back to the power source. Easy to set up, operate and maintain...the Magnum® SG is a great addition to your welding tool set.

MAGNUM® 100SG SPOOL GUN

The Magnum® 100SG spool gun is the lowest cost way to add reliable and precise spool gun wire feeding performance for soft aluminum wire. It’s easy to set up, does not require a bulky outboard adapter/power module and shares gun expendable parts with the standard MIG gun included with the Power MIG® models. MODEL

PRODUCT NUMBER

LENGTH FT.(M)

DIAMETER IN.(MM)

MACHINE

ADAPTER

Magnum 100SG

K2532-1

10 (3.0)

.030-.035 (0.8-0.9)

130A/30%

POWER MIG216 POWER MIG180C POWER MIG140C SP-180T, SP-140T

None

Magnum SG

K487-25

25 (7.5)

.025-3/64 (0.6-1.2)

250A/60%

® POWER MIG 216

K2703-1

Magnum 250 LX

K2490-1

25 (7.5)

.025-3/64 (0.6-1.2)

CO2:300A/60% Ar: 280A/60% Ar: 200A/100%

POWER MIG350MP POWER MIG255XT POWER MIG216

None None K2703-1

DESCRIPTION

MAGNUM® SG SPOOL GUN ACCESSORIES

© 2010 STEEL AND PIPES, INC.

SG CONTROL MODULE Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor. Order K488

170

CONTROL MODULE INPUT CABLE Terminal Strip and Lug. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having terminal strip and lug connections. Order K492-10

CONTROL MODULE INPUT CABLE 14-pin MS-type & Lug. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power connections. Order K691-10

CONTROL MODULE INPUT CABLE 14-pin MS-type and Twist-Mate™. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having 14-pin MS-type control connections and Twist-Mate™ power connections. Order K493-10

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

MT-250 SG SPOOL GUN • Designed for use with the Migmaster 250, Migmaster 203, Migmaster 253, MultiMaster 260,and also for 353cv, 350mpi, SVI-450i, 453cv Multi-power 460, 653cvcc with MIG-28A control package. • Weighs less than 3 lbs. • Uses durable MT contact tips and nozzles • Powerful gear motor in handle pulls welding wire from 4 in. diameter spool in the molded gun case • Partial depression of the torch trigger controls gas pre-and post-flow operations-full depression provides wire feeding as well as gas flow • Wire feed control mounted on gun provides precise adjustment of wire feed rate at torch

MT-250 SG • Medium-duty 200 amp, 100% duty performance • Spool holder adjusts to balance in the operator's hand • 25ft. service lines

Control Cable - 6 ft. for non-ESAB Power Sources ................ 996736 Secondary Contactor Kit - 300 Amp. .............................. 677333 Secondary Contactor Control Cable - 1.5 ft. .................... 677389 Anti-Stick (Burnback) Kit .................................................. 2075076

OPTIONS & ACCESSORIES MT-250 SG

ORDERING INFORMATION

Zippered Hose Sheath 25 ft. for gun service line protection ...................................... 35454 Gun Extension Lines Gas Hose Assembly, 25 ft. ....................................................... 34V38 Coupling, Gas Hose (5/8 in. - 18 in.) ..................................... 11N17 Quick Connector, Male #2 - 1/0 ....................................... 13733936 Quick Connector, Female #2 - 1/0 ..................................... 13735632 Gas Meter (measures gas flow at the gun) ................................ 19043 Feed Roll - .030-3/64 in. Soft wire(.8-1.2 mm) ................... *36866 Feed Roll Knurled - .030-.045 in. Hard wire(.8-1.2 mm) ..... 36867 Inlet Guide Liner - .030-3/64 in. (.8-1.2 mm) Gray .............. 36869 Barrel Liner - .030-3/64 in. (.8-1.2 mm) White ..................... 36871

Mig-28A, MT-250SG Package - Includes Mig-28A control, spool gun, three 3/64 in. contact tips, drive roll, liner, control cable, gas hose and #10 nozzle and 25 ft. service lines .............................................................. 37707 MT-250 SG Spool Gun - Includes three 3/64 in. contact tips, drive roll, liner, control cable, gas hose and #10 nozzle and 25 ft. service lines ....................................................... 36779 Control Cable - 6 ft. for ESAB CV Power Sources ............... 36618

MIG SPOOL GUN ACCESSORIES ST-23A, MT-250SG Spool Guns TABLE 1. CONTACT TIPS WIRE SIZE .023 in. (0.6mm) .030 in. (0.8mm) .030 in. (Notched) .035 in. (0.9mm) .035 in. (Notched) .040 in. (1.0mm) .045 in. (1.2mm) 3/64 in. (Notched) 3/64 in. (1.2mm)

SHORT – – – – – – 999578 – –

*STANDARD DUTY MEDIUM 20543 20544 36884 996995 36885 37287 37290 36886 (b) 996999 (a)

LONG 999742 996994 – 996996 – 37288 996998 – –

**HEAVY DUTY MEDIUM – 0558002367 – 0558002368 – 0558002369 37286 – 17765

TABLE 2. NOZZLES SIZE No. 6 No. 8 No. 8 HD No. 10 No. 10 HD No. 12 HD No. 12 Spot

INSIDE DIAMETER 3/8 in. (10mm) 1/2 in. (13mm) 1/2 in. (13mm) 5/8 in. (16mm) 5/8 in. (16mm) 3/4 in. (20mm) 3/4 in. (20mm)

STANDARD DUTY 998895 998893 – 998894 – – 17316*

HEAVY DUTY – – 999471 – 999472** 999473 999625

SUPER DUTY – – – – – 17350 –

*Requires Tip Adapter 17983 ** RequiresTipAdapter 17984 (a) Included with ST-23A (b) Included with MT-250SG

*Requires 17293 Tip Adapter and 17321 Adapter **Included with ST-23A and MT-250SG

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

171

© 2010 STEEL AND PIPES, INC.

CONTACT TIPS INSIDE DIAMETER 0.031 0.037 0.043 0.043 0.048 0.048 0.054 0.060 0.058


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

GUN MASTER 250 & 400 • “Slide-on” standard and heavy duty copper wall nozzles deliver performance and dependability • Lightweight handle is impact resistant for long life • Cable resists cuts, spatter, oil and abrasion

ORDERING INFORMATION Complete Assemblies (NAS Style) Gun Master 250 NAS 10 ft. x .023 ............................... 0558001630 Gun Master 250 NAS 10 ft. x .035-.045 ...................... 0558001631 Gun Master 250 NAS 12 ft. x .035-.045 ....................... 0558001635 Gun Master 250 NAS 15 ft. x .035-.045 ...................... 0558001639 Gun Master 400 NAS 10 ft. x .035-.045 ...................... 0558001653 Gun Master 400 NAS 10 ft. x .052-1/16 ....................... 0558001654 Gun Master 400 NAS 10 ft. x .035-3/64 Al .................. 0558001655 Gun Master 400 NAS 12 ft. x .035-.045 ...................... 0558001656 Gun Master 400 NAS 12 ft. x .052-1/16 ....................... 0558001657 Gun Master 400 NAS 12 ft. x .035-3/64 Al .................. 0558001658 Gun Master 400 NAS 15 ft. x .035-.045 ...................... 0558001659 Gun Master 400 NAS 15 ft. x .052-1/16 ....................... 0558001660 Complete Assemblies (CC Style) Gun Master 250cc 10 ft. x .023 .................................... 0558001643 Gun Master 250cc 10 ft. x .035-.045 ........................... 0558001644 Gun Master 250cc 12 ft. x .035-.045 ........................... 0558001645 Gun Master 250cc 15 ft. x .035-.045 ........................... 0558001649 Gun Master 400cc 10 ft. x .035-.045 ........................... 0558001665 Gun Master 400cc 10 ft. x .052-1/16 ............................ 0558001666 Gun Master 400cc 12 ft. x .035-.045 ........................... 0558001667 Gun Master 400cc 12 ft. x .052-1/16 ............................ 0558001668 Gun Master 400cc 15 ft. x .035-.045 ........................... 0558001669 Gun Master 400cc 15 ft. x .052-1/16 ............................ 0558001670 Basic (NAS Style) Gun Master 400 NAS 25 ft. Basic ................................ 0558001664 Basic (CC Style) Gun Master 400cc 25 ft. Basic ..................................... 0558001674

Steel & Flux Core

.023 x 10,12,15 ft. Liner ................................................ 0558001675 .030 x 10,12,15 ft. Liner .......................................................... 37031 .035/.045 x 10,12,15 ft. Liner .................................................. 37032 .052-1/16 x 10,12,15 ft. Liner .................................................. 37033 5/64 x 10,12,15 ft. Liner ................................................ 0558001676 3/32 x 10,12,15 ft. Liner .......................................................... 37034 7/64-1/8 x 10,12,15 ft. Liner .................................................. 952948 .035 - .045 x 25 ft. Liner ............................................... 0558002137 .052 - 1/16 x 25 ft. Liner ............................................... 0558002138 5/64 x 25 ft. Liner ......................................................... 0558002139 3/32 x 25 ft. Liner ......................................................... 0558002140

OPTIONS

Aluminum

ESAB Power Pin for MIG 35 ........................................ 0558002313 Lincoln Power Pin ........................................................ 0558001862 45 Degree 250Amp Gooseneck ................................... 0558001616 (for Gun Master 250) Gas Meter (measures gas flow at the gun) ........................... 19043

Trigger Leads, ESAB Style

Gun Amperage Ratings 100% DUTY CYCLE GUN MASTER CO 2 MIXED 250 AMP 250 180 400 AMP 400 275

60% DUTY CYCLE CO 2 MIXED 300 250 525 400

Note: Ratings are based on tests that comply with NEMA ARC Welding Section Standard 11-6-1975 for Duty Cycle. “The time period of one complete cycle shall be 10 minutes” (60% = 6 minutes). National Electrical Manufacturers Association, 2101 L Street N.W., Washington, D.C., 20037.

172

.035-3/64 x 15 ft. Poly Liner ................................................. *37039 3/64-1/16 x 15 ft. Poly Liner .................................................. *37040 *Requires Liner Sleeve P/N 055800 3050 when H.D. partsused. Note: All 15 ft. Liners can be trimmed to fit 10 ft. or 12 ft. Trigger Lead 6 in., Gun Master 250 .............................. 0558001815 Trigger Lead 24 in., Gun Master 250 ........................... 0558002583 Trigger Lead, Gun Master 400 ............................................ 2075216

SPECIFICATIONS

© 2010 STEEL AND PIPES, INC.

CONSUMABLES & ACCESSORIES Liner Selection

Control Plugs (Options) Lincoln (LN 7, 8, 9, NAZ) .............................................. 0558001864 Instruction Manual Gun Master 250 ............................. F-15-612 Instruction Manual Gun Master 400 ............................. F-15-613 Sales Literature ......................................... (12-01-2006) ARC-23095

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WIRE TYPE AND SIZE

Hard Wires .030 in. (0.8mm) .035 in. - .045 in. (0.9mm - 1.2mm) .045 in. - 1/16 in. (1.2 - 1.6mm) 5/64 in. - 3/32 in. (2 - 2.4mm) Soft Wires .035 in. (0.9mm) 3/64 in. - 1/16 in. (1.2 - 1.6mm)

LINER

37031 37032 37033 37034 37039 37040

STANDARD DUTY TIPS WIRE SIZE PART NO.

HEAVY DUTY TIPS WIRE SIZE

.023 .030 .035 .045 .045 - 3/64 .052 1/16 5/64

.030 .035 .040 .045 3/64 (Aluminum) .052 1/16 (Hard or Cored Wire) 1/16 (Aluminum) 5/64 3/32

20543 20544 996995 37290 996999 2075349 996997 2075230

PART NO.

0558002367 0558002368 0558002369 37286 17765 17778 37291 948835 948832 948833

Nozzles STANDARD DUTY INSIDE DIAMETER

3/8 in. 1/2 in. 1/2 in. 1/2 in. 5/8 in. 5/8 in.

TIP RELATIONSHIP USING ALL SIZES STANDARD AND HEAVY DUTY TIPS 5/64 IN. & 3/32 IN.

TIP RELATIONSHIP USING ALL SIZES HEAVY DUTY TIPS EXCEPT 5/64 IN. & 3/32 IN.

Flush 1/8 in. Recess Flush 1/8 in. Stick Out Flush 1/8 in. Stick Out

Copper Copper Copper Copper Copper Copper

1/8 in. Recess Flush 1/8 in. Stick Out 1/4 in. Stick Out 1/8 in. Stick Out 1/4 in. Stick Out

0558001599 0558001600 0558001598 0558001601

1/8 in. Recess 1/4 in. Recess Flush 1/8 in. Stick Out

Copper Copper Copper Copper

Flush 1/8 in. Recess 1/8 in. Stick Out 1/4 in. Stick Out

0558001602

1/4 in.

Brass

1/4 in.

PART NO.

0558001609 0558001612 0558001611 0558001613 0558001614 0558001615

STD. DUTY TIP/NOZ. ADAPTOR

Tip/Adaptor HEAVY DUTY INSIDE DIAMETER

5/8 in. 5/8 in. 5/8 in. 5/8 in.

0558001608

PART NO.

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Contact Tips

Liners for Gun Master 250/400

SPOT

Spot Nozzle

HEAVY DUTY TIP/NOZ. ADAPTOR

Tip/Adaptor

0558001888

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

173

© 2010 STEEL AND PIPES, INC.

All tips are the medium length to give these relationships.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HW-17 TORCH FAMILY - 150 AMP • Quick release of electrodes • Hard body provides superior heat and abrasion resistance for longest life • Silicon rubbor body provides improved resistance to breakage in rough duty • Flexible head models provide added versatility for reaching hard-to-get-t applications

SPECIFICATIONS: Capacity

130 Amps, 100% duty cycle, ac or dc 150 Amps, 50% duty cycle, ac or dc with std. accessories

Size

OVERALL LENGTH...................... 8-1/8 in. (206 mm) HANDLE DIAMETER......................... 3/4 in. (19 mm) LENGTH OF HEAD... (short cap) 3-13/16 in. (97 mm) (medium cap) 5-1/4 in. (133 mm) (long cap) 7-7/16 in. (189 mm) DIAMETER OF HEAD.....................51/64 in. (20 mm) WEIGHT (less cable)........................ 4.8 oz. (137 gm) HEAD ANGLE: HW-17, HW-17R....... 60 or 90 degree HW-17F................................................. variable

Torch Assemblies DESCRIPTION

60 DEG. HEAD, 12-1/2 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 60 DEG. HEAD, 25 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 60 DEG. HEAD w/SLIDE VALVE 12-1/2 ft.,1-pc.cable & hose ay. 25 ft., 1-pc. cable & hose ay. 60 DEG. HEAD w/ROTARY VALVE, 12-1/2 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 60 DEG. HEAD w/ROTARY VALVE, 25 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 90 DEG. HEAD, 25 ft. 1-pc. cable & hose ay. 90 DEG. HEAD w/SLIDE VALVE, 25 ft. 90 DEG. HEAD w/ROTARY VALVE, 25 ft.

HW-17 HARD BOD Y

HW-17R SILICON RUBBER

HW-17F FLEX HEAD

16X48 33855 35782

16X48R — —

19881 — —

16X50 33856

16X50R —

19883 —

634705 634706

— —

— —

16X48LV 33813 35857

634705R 33813R —

19882 33815 —

16X50LV 33814 35856

634706R 33814R —

19884 33816 —

634720 601152 —

— — 601152R

— — —

Cups, Collets, & Collet Bodies ELECTRODE SIZE, in.

STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY

© 2010 STEEL AND PIPES, INC.

CUP NUMBER

HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP

174

.020 10N21 10N29 45V29 — 4=1/4 10N50 105Z43 54N18 — 54N35

.040 10N22 10N30 45V24 — 5=5/16 10N49 105Z42 54N17 — 54N34

1/16 10N23 10N31 45V25 — 6=3/8 10N48 105Z44 54N16 — 54N33

3/32 10N24 10N32 45V26 45V64 7=7/16 10N47 105Z45 54N15 — 54N32

1/8 10N25 10N28 45V27 995795 8=1/2 10N46 08N78 54N14 — 54N31

— — — — — 10=5/8 10N45 08N79 — 53N88 —

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

— — — — — 12=3/4 10N44 08N80 — 53N87 —

— — — — — SHORT — — 54N19 53N89 —


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

For selection of special ceramic or sleeved cups, see Accessories following Torches. Torch Parts & Accessories ITEM

PART NO.

DESCRIPTION

57Y06 BODY, HW-17 57Y06LV BODY, HW-17V w/valve 19621 57Y06R BODY, HW-17R 19576R BODY, HW-17RV w/valve 19621 19885 BODY, HW-17F 19886 BODY, HW-17FV w/valve 19621 601477 BODY, HW-17N (90 DEG.) 2 105Z55 HANDLE, HW-17, HW-17V, HW-17R, HW-17F 105Z55R HANDLE, RIBBED (optional) 13 3 57Y02 LONG TORCH CAP w/O-RING (98W18) 4 34015 MEDIUM TORCH CAP w/O-RING (98W18) 5 57Y04 SHORT TORCH CAP w/O-RING (98W18) 6 17732 ARGON SHUT OFF SLIDE VALVE AY. 7 – COLLET (see table above) 8 – COLLET BODY (see table above) 9 – GAS CUP (see table above) 10 10 54N01 INSULATOR, Req'd for GAS LENS 54N63 INSULATOR, Req'd for GAS LENS, LG. DIA. 11 – GAS LENS COLLET BODY (see table above) 11 12 – GAS LENS CUP (see table above) 13 105Z57 POWER CABLE ADAPTOR 14 997022* 1-pc. POWER CABLE, 12 1/2 ft. 12 997023* 1-pc. POWER CABLE, 25 ft. 15 33946 2-pc. POWER CABLE & HOSE AY., 121/2 ft. 33947 2-pc. POWER CABLE & HOSE AY., 251/2 ft. 16 35873 2-pc. POWER CABLE & HOSE AY., T.L.12 1/2ft. 0558002476 2-pc. POWER CABLE & HOSE AY., T.L. 25 ft. 34651 2-pc. POWER CABLE REPAIR KIT (not shown) *Optional PVC Power Cable 57Y01 (12-1/2 ft.); 57Y03 (25 ft.)

HW-17 TORCH

1

4

3 5

2

7

6

1 8

9

14

15 / 16

In Steel and Pipes

WE HAVE A WIDE VARIETY OF ORNAMENTAL IRON DESIGNS AND ACCESSORIES FOR ALL YOUR PROJECT NEEDS:

We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

175

© 2010 STEEL AND PIPES, INC.

• RAILINGS • GATES • STAIRS • FENCES • DECORATIVE DESIGNS AND MORE.....


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HW-18 TORCH FAMILY - 425 AMP • The industry standard water-cooled general purpose torch • Ideal for production welding Lightweight - reduces operator fatigue • Watertight - brazed, closed cooling system • Gas lens available for improved shielding • Hard body w/HFCTM (HW-18) provides superior heat and abrasion resistance for the longest life • Economical silicon rubber body (HW-18R) provides resistance to breakage

SPECIFICATIONS: Capacity

300 Amps, 100% duty cycle, ac or dc with standard accessories 375 Amps, 100% duty cycle, ac or dc with gas lens accessories 425 Amps, 50% duty cycle, ac or dc

Size OVERALL LENGTH...................10-1/2 in. (267 mm) HANDLE DIAMETER...................1-1/16 in. (27 mm) LENGTH OF HEAD... (short cap) 3-3/16 in. (81 mm) (medium cap) 5-7/16 in. (138 mm) (long cap) 7-7/16 in. (189 mm) DIAMETER OF HEAD...................29/32 in. (23 mm) WEIGHT (less cable)......................... 7 oz. (200 gm) HEAD ANGLE: HW-18.............................. 60 degree COOLING REQUIREMENTS...1 qt. min. (0.94 l/min)

Torch Assemblies DESCRIPTION

60 DEG. HEAD cable & hose, 12-1/2 ft. cable & hose, 25 ft.

HW-18 HARD BOD Y

HW-18 SILICON RUBBER

948361 948362

948361R 948362R

Cups, Collets, & Collet Bodies ELECTRODE SIZE, in.

STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY CUP NUMBER

HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP

.020

.040

1/16

3/32

1/8

10N21 10N29 45V29 —

10N22 10N30 45V24 —

10N23 10N31 45V25 —

10N24 10N32 45V26 45V64

10N25 10N28 45V27 995795

— — — — —

— — — — —

— — — — —

4=1/4

5=5/16

6=3/8

7=7/16

8=1/2

10=5/8

12=3/4

SHORT

10N50 105Z43 54N18 — 54N35

10N49 105Z42 54N17 — 54N34

10N48 105Z44 54N16 — 54N33

10N47 105Z45 54N15 — 54N32

10N46 08N78 54N14 — 54N31

10N45 08N79 — 53N88 —

10N44 08N80 — 53N87 —

— — 54N19 53N89 —

© 2010 STEEL AND PIPES, INC.

For selection of special ceramic or sleeved cups, see Accessories following Torches.

176

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Torch Parts & Accessories ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NO. 948350 948350R 10N15 10N15A 57Y02 34015 57Y04 – – – 54N01 54N63 – – 45V11 40V64 41V29 40V75 41V30 40V74 41V32 98W43 11N16

DESCRIPTION BODY, HW-18 BODY, HW-18R HANDLE, HW-18 HANDLE, HW-18R LONG TORCH CAP w/O-RING (98W18) MEDIUM TORCH CAP w/O-RING (98W18) 5 SHORT TORCH CAP w/O-RING (98W18) COLLET (see table above) COLLET BODY (see table above) GAS CUPS (see table above) 6 INSULATOR, Req'd for GAS LENS INSULATOR, Req'd for GAS LENS, LG. DIA. GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) 9 POWER CABLE ADAPTOR POWER CABLE, 12-1/2 ft. 10 POWER CABLE, 25 ft. 7 GAS HOSE, 12-1/2 ft. GAS HOSE, 25 ft. 11 8 WATER HOSE, 12-1/2 ft. WATER HOSE, 25 ft. HOSE CLAMP WATER ADAPTOR (5/8 - 18 LH to 1/4 NPT) (not shown)

HW-18 TORCH 3

4

2

1 13

12

16 16

14 15

In Steel and Pipes

WE HAVE PERFORATED METALS WITH GOOD PERMEABILITY AND DECORATIVE EFFECTS MAINLY USED FOR DECORATION OF: • ALSO USED AS EXQUISITE DECORATIVE SHEETS FOR BUILDING STAIRCASES, • BALCONIES • ENVIRONMENTAL FRIENDLY OFFICE FURNITURE • AND MORE...

We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

177

© 2010 STEEL AND PIPES, INC.

• DOORS AND WINDOWS • PANELS • ELEVATOR CABINETS • STAND • SHELF - CAN BE USED AS SOUND ABSORPTION WALL MATERIALS FOR THE CEILING AND WALLS IN BUILDING


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HW-20 TORCH FAMILY - 300 AMP • Compact water-cooled design for higher current applications in confined areas • Hard body w/HFCTM (HW-20) provides superior heat and abrasion resistance- available in 2 versions • Economical silicon rubber body (HW-20R) provides resistance to breakage

SPECIFICATIONS: Capacity

240 Amps, 100% duty cycle, ac or dc w/ standard accessories 250 Amps, 100% duty cycle, ac or dc w/ gas lens accessories 300 Amps, 50% duty cycle, ac or dc

Size

OVERALL LENGTH.................................. 6-7/8 in. (175 mm) HANDLE DIAMETER......................................3/4 in. (19 mm) LENGTH OF HEAD............... (short cap) 2-19/64 in. (58 mm) (medium cap) 3-9/32 in. (83 mm) (long cap) 7-5/16 in. (186 mm) DIAMETER OF HEAD......................................3/4 in. (19 mm) WEIGHT (less cable).................................... 3.5 oz. (100 gm) HEAD ANGLE: HW-20............................................ 70 degree COOLING REQUIREMENTS.................1 qt. min. (0.94 l/min)

Torch Assemblies DESCRIPTION

70 DEG. HEAD cable & hose ay., 12-1/2 ft. cable & hose ay., 25 ft.

HW-20 HARD BOD Y

HW-20 SILICON RUBBER

948084 948085

948084R 948085R

Cups, Collets, & Collet Bodies .020

.040

1/16

3/32

1/8

13N20 13N25 45V41

13N21 13N26 45V42

13N22 13N27 45V43

13N23 13N28 45V44

13N24 13N29 45V45

— — — —

CUP NUMBER

4=1/4

5=5/16

6=3/8

7=7/16

8=1/2

10=5/8

HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP

13N08 13N14 53N58

13N09 13N15 53N59

13N10 13N16 53N60

13N11 13N17 53N61

13N12 13N18 —

13N13 13N19 —

ELECTRODE SIZE, IN.

STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY

For selection of special ceramic or sleeved cups, see Accessories following Torches.

Torch Parts & Accessories ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

© 2010 STEEL AND PIPES, INC.

14 15 16 17

178

PART NO. 948020 948020R 53N06 41V24 41V33 41V35 598882 – – – – – 45V11 45V03 45V04 45V09 45V10 45V07 45V08 53N04 13N42 11N16 85W49

DESCRIPTION BODY, HW-20 w/O-RING (85W49) BODY, HW-20R HANDLE, HW-20 LONG TORCH CAP w/O-RING (181W53) SHORT TORCH CAP w/O-RING (181W53) MEDIUM TORCH CAP w/O-RING (181W53) CUP GASKET COLLET (see table above) COLLET BODY (see table above) GAS CUP (see table above) GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) POWER CABLE ADAPTOR POWER CABLE, 12-1/2 ft. 10 POWER CABLE, 25 ft. GAS HOSE, 12-1/2 ft. 11 GAS HOSE, 25 ft. WATER HOSE, 12-1/2 ft. WATER HOSE, 25 ft. HOSE CLAMP O-RING AY. TOOL (not shown) WATER ADAPTOR (5/8 - 18 LH to 1/4 NPT) (not shown) O-RING

HW-20 TORCH 4 2

5 3

17 1

6 7

12

8

13

9 14 16

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

15


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HW-26 TORCH FAMILY - 220 AMP • Quick release of electrodes • Hard body provides superior heat and abrasion resistance for longest life • Silicon rubber body provides improved resistance to breakage in rough duty • Flexible head models provide added versatility for reaching hard-to-get-at applications

SPECIFICATIONS: Capacity

160 Amps, 100% duty cycle, ac or dc with std. accessories 200 Amps, 100% duty cycle, ac or dc with std. accessories 150 Amps, 50% duty cycle, ac or dc with std. accessories

Size OVERALL LENGTH ............................. 8-7/8 in. (225 mm) HANDLE DIAMETER .......................... 1-7/32 in. (31 mm) LENGTH OF HEAD ............ (short cap) 3-3/4 in. (95 mm) (medium cap) 5-3/8 in. (136 mm) (long cap) 7-3/8 in. (187 mm) DIAMETER OF HEAD ........................... 29/32 in. (23 mm) WEIGHT (less cable) ............................ 7.75 oz. (221 gm) HEAD ANGLE: HW-26 ...................................... 75 degree HW-126F ............................................. variable

Torch Assemblies HW-26 HW-26R HW-26F HARD SILICON FLEX BODY RUBBER HEAD

DESCRIPTION

75 DEG. HEAD, 12-1/2 ft. w/o VALVE 1-pc. cable & hose ay. 17137 2-pc. cable & hose ay. 33857 75 DEG. HEAD, 25 ft. w/o VALVE 1-pc. cable & hose ay. 46V29 2-pc. cable & hose ay. 948127 75 DEG. HEAD w/ROTARY VALVE,12-1/2 ft. 1-pc. cable & hose ay. 17138 2-pc. cable & hose ay. 33858 2-pc. cable & hose ay. twist lock 35858 75 DEG. HEAD w/ROTARY VALVE, 25 ft. 1-pc. cable & hose ay. 46V27 2-pc. cable & hose ay. 948128

17137R —

33848 —

46V29R 33849 948127R — 17138R —

33850 33852

46V27R 33851 948128R 33853

ELECTRODE SIZE, in.

STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY CUP NUMBER

HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP

.020

.040

1/16

3/32

1/8

10N21 10N29 45V29 —

10N22 10N30 45V24 —

10N23 10N31 45V25 —

10N24 10N32 45V26 45V64

10N25 10N28 45V27 995795

— — — — —

— — — — —

— — — — —

4=1/4

5=5/16

6=3/8

7=7/16

8=1/2

10=5/8

12=3/4

SHORT

10N50 105Z43 54N18 — 54N35

10N49 105Z42 54N17 — 54N34

10N48 105Z44 54N16 — 54N33

10N47 105Z45 54N15 — 54N32

10N46 08N78 54N14 — 54N31

10N45 08N79 — 53N88 —

10N44 08N80 — 53N87 —

— — 54N19 53N89 —

For selection of special ceramic or sleeved cups, see Accessories following Torches.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

179

© 2010 STEEL AND PIPES, INC.

Cups, Collets, & Collet Bodies


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Torch Parts & Accessories ITEM 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO. 45V65 598478 45V65R 598478R 34014 34013 19624 10N15 57Y02 34015 57Y04 54N84 – – – 54N01 54N63 – – 45V62 46V28 46V30 33697 33698 35874 34652

DESCRIPTION BODY, HW-26 BODY, HW-26V w/valve (598279) BODY, HW-26R BODY, HW-26RV w/valve (19622) BODY, HW-26F Flex Head BODY, HW-26FV w/valve (34074) RIBBED HANDLE, HW-26R (for rubber body) HANDLE, HW-26F (for flex body) LONG TORCH CAP w/O-RING (98W18) MEDIUM TORCH CAP w/O-RING (98W18) SHORT TORCH CAP w/O-RING (98W18) HANDLE, HW-26 (for hard body) COLLET (see table above) COLLET BODY (see table above) GAS CUP (see table above) INSULATOR, Req'd for GAS LENS INSULATOR, Req'd for GAS LENS, LG. DIA. 10 GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) POWER CABLE ADAPTOR 11 1-pc. POWER CABLE, 12-1/2 ft. 1-pc. POWER CABLE, 25 ft. 2-pc. POWER CABLE & HOSE AY., 12-1/2 ft. 12 2-pc. POWER CABLE & HOSE AY., 25-1/2 ft. 9 2-pc. POWER CABLE & HOSE AY., T.L.12-1/2 ft. 2-pc. POWER CABLE REPAIR KIT (not shown)

HW-26 TORCH 4 3 5

6 2 7 1

14

8

15 13

VISIT OUR SPACIOUS SHOWROOMS!

WITH A LARGE DIVERSITY OF PRODUCTS AND BRANDS

© 2010 STEEL AND PIPES, INC.

OF PICTURERSANCH CAGUAS B

We are your Industrial Supermarket • www.steelandpipes.com 180

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-17A & PT-17AM PLASMARC™ MANUAL CUTTING TORCHES These versatile, easy-to-use 100 amp torches provide superior performance for a full range of manual and mechanized cutting applications. • Excellent cutting capability—cuts up to 1-1/4 in. (31.75 mm); severs up to 1-1/2 in. (38.1 mm); pierces up to 1/2 in. (12.7 mm) • Produce clean, high quality cuts • Patented safety circuit for enhanced operator safety • Operate with shop or cylinder air • Compact, lightweight design for ease of handling • Long life electrodes lower operating costs • Pilot arc starting—even starts on paint • Gouging nozzles available • Intermittent cutting capability for grate or expanded metal applications • Standard and drag shield guards available for operator convenience One-year warranty •

SPECIFICATIONS Cuts up to 1-1/4 in. (31.75 mm); severs up to 1-1/2 in. (38.1 mm); pierces up to 1/2 in. (12.7 mm) Current Capacity ............................. 100 amps @ 100% duty cycle Air Supply .................................. 290 cfh @ 75% psig (140 1/min.) Length of Service Lines .................. 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions PT-17A Overall Length ................................................ 10 in. (254 mm) Length of Head ............................................ 2.87 in. (730 mm) Weight 25 ft....................................................................... 9 lbs. (4 kg) 50 ft.................................................................. 15 lbs. (6.8 kg) PT-17AM Overall Length ...........................................17.25 in. (438 mm) Weight 25 ft.................................................................. 10 lbs. (4.5 kg) 50 ft.................................................................. 16 lbs. (7.3 kg)

CONSOLES PCM-875 & PCM-1125 (w/ adaptor P/N 19500), PCM-150

PT-17A, 75°, 25 ft. (7.6 m) line ............................................ PT-17A, 75°, 50 ft. (15.2 m) line .......................................... PT-17AM, Mechanical, 25 ft. (7.6 m) line ............................ PT-17AM, Mechanical, 50 ft. (15.2 m) line ..........................

19999 20000 20001 20002

Instruction Literature, order number ................................ F-14-441

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

181

© 2010 STEEL AND PIPES, INC.

ORDERING INFORMATION


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

OPTIONAL ACCESSORIES

Contents of PT-17A/17AM Spare Parts Kits

50 amp Spare Parts Kit .......................................................... 20062 70 amp Spare Parts Kit ........................................................... 20063 100 amp Spare Parts Kit ......................................................... 20064 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch .................... 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals, 1-3/4 in. (44.5 mm) 42 in. (106 cm) Radius ............................................ 0558003258 Spatter Shield Use for piercing .................................................................. 20748 75° Plasmit Torch Head Protector For gouging ........................................................................ 20803 Mechanical Plasmit Torch Head Protector For gouging ....................................................................... 20804 Leather Sheath 10 ft. (25.4 cm) length ........................................................ 20812 Heavy Duty Heat Shield .......................................................... 20747 Heat Shield Guard ................................................................... 19990 Drag Heat Shield Guard .......................................................... 19989 Adaptor for PT-17A Handheld Torch to PCM1125 .................... 19500

AMPS Cutting Nozzle 30 60 80 100 Gouging Nozzle 70 100

P/N

DESCRIPTION

Heat Shield Shield Guard, Drag Shield Guard, Std. Cutting Nozzle, .046 Cutting Nozzle, .052 Cutting Nozzle, .057 Cutting Nozzle, .067 Electrode Electrode Adaptor Baffle Tube Shroud Cap Shroud Wrench Pilot Arc Adaptor 70 amp Gouging Nozzle 100 amp Gouging Nozzle

P/N

20747 19989 Type 19990 Type 19915 19916 19917 20056 19918 20053 19114 19498 19499 19129 19497 20426 20427

P/N 20062 50 AMP

P/N 20063 P/N 20064 70 AMP 100 AMP

2 2

2 2

2 2

1

1

1

5 5 1 1 1 1 1 1 -

5 5 5 5 1 1 1 1 1 1 1 -

5 5 5 5 1 1 1 1 1 1 1 1

ORIFICE SIZE

19915 19916 19917 20056

.046 .052 .057 .067

20426 20427

.089 .106

Baffle Tube 19114

Electrode Adaptor 20053

Shroud Cap - 19498

Mechanized Torch Body - 20010 75° Torch Body - 20008 Switch - 18224 Electrode 19918

© 2010 STEEL AND PIPES, INC.

Shield Guard, Drag. - 19989 Shield Guard, Std. - 19990

182

Heat Shield 20747 Shroud -19502

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Switch Band- 19127

Flex Support - 19156


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-20AMX TORCH & PT-21AMX PLASMARC™ MECHANIZED CUTTING TORCHES In conjunction with an ESAB console, the PT-20AMX torch offers the ideal solution for low cost, high performance cutting. 180° in-line mechanical torch Excellent cutting capability Extremely versatile—excellent for thinner materials Equipped with patented safety interlock feature Pilot arc starting—even starts on paint Available with 50 ft. (15.2 m), 25 ft. (7.6 m), *4 ft. (1.2 m) and *17 ft. (5.2 m) torch leads • Compatible with a variety of ESAB consoles • One-year warranty • Drops easily into standard 1-3/8 in. (34.9 mm) torch holders *4 ft. (1.2 m) and 17 ft. (5.2 m) torch leads used on Remote Arc Starter only • • • • • •

SPECIFICATIONS Current Capacity ............................................ 100 amps @ 100 % duty cycle Plasma/Cooling Gas Requirements ..................................... 350 cfh @ 85 psig Length of Service Lines ............................ 4ft. (1.2 m), 17 ft. (5.2 m), 25ft. (7.6 m), 50 ft. (15.2 m) Dimensions Length .......................................................................... 17.5 in. (444 mm) Barrel Diameter ............................................................. 1-3/8 in. (34.9 mm)

CONSOLES PT-20AMX, PCM-875, PCM-1125 (with adaptor 19500), ESP-100 (no adaptor)

ORDERING INFORMATION PT-20AMX for Console Connections Torch with rack, 50 ft. (15.2 m) .............................0558003421 Torch without rack, 50 ft. (15.2 m) .........................0558003422 Torch with rack, 25 ft. (7.6 m) ................................0558003427 Torch without rack, 25 ft. (7.6 m) ...........................0558003426

PT-20AMX Remote Arc Starter Torch without rack, 4 ft. (1.2 m) .............................0558003424 Torch without rack, 17 ft. (5.2 m) ...........................0558003425

PT-21AMX for use with PowerCut ®1250 & 1500

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

183

© 2010 STEEL AND PIPES, INC.

Torch with rack, 50 ft. (15.2 m) ..............................0558003614 Torch without rack 50 ft. (15.2 m) ..........................0558003615 Torch with rack, 25 ft. (7.6 m) ................................0558003616 Torch without rack, 25ft. (7.6 m) ............................0558003617


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Contents of PT-20AMX Spare Parts Kits QUANTITY DESCRIPTION

PART NO.

Heat Shield (70/100 amp) Heat Shield (50 amp) Cutting Nozzle (50 amp) Cutting Nozzle (70 amp) Cutting Nozzle (90 amp) Cutting Nozzle (100 amp) Electrode Electrode Insulator Electrode Holder Assy. Baffle Tube Pilot Arc Adaptor O-Ring Lubricant (1 oz.) Seat/Baffle Wrench 1/16 in. Hex-Key Wrench Tool Box

P/N 21370 50 AMP

P/N 21369 70/80AMP

P/N 0558004271 90 AMP

P/N 21376 100 AMP

2 5 5 1 1 1 1 5 1 1 1 1

2 1 5 5 5 1 1 1 1 5 1 1 1 1

2 1 5 5 5 1 1 1 1 5 1 1 1 1 1

2 1 5 5 5 5 1 1 1 1 5 1 1 1 1

21326 21447 21330 21329 0558004269 21328 21150 21373 21332 21374 19497 488157 17672 21375 93750006 950272

OPTIONAL ACCESSORIES Remote Hand Control Switch 25 ft. (7.6 m) lead

Torch Holder Assembly ........................................................ 16V83 50 amp Spare Parts Kit ........................................................ 21370 70 amp Spare Parts Kit ........................................................ 21369 100 amp Spare Parts Kit ..................................................... 21376 90 amp Spare Parts Kit .............................................. 0558004271

For PT-20AMX .............................................................. 680982 For PT-21AMX ...................................................... 0558003612

Adaptor for PCM-875 and PCM-1125 .................................... 19500

Plasma Flow Measuring Kit

This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ............................... 19765

CUTTING PARAMETERS FOR PT-20/21AMX TORCH ON CARBON STEEL 100 Amp Data, Nozzle P/N 21328, Heat Shield P/N 21326 METAL THICKNESS (IN.)

1/4 1/2 3/4 1 1-1/4 1-1/2

AIR PRESSURE STAND-OFF (PSIG) (IN.)

85 85 85 85 85 85

1/4 1/4 1/4 1/4 5/16 5/16

70 Amp Data, Nozzle P/N 21329, Heat Shield P/N 21326

TRAVEL ARC SPEED VOLTS (IPM)

KERF WIDTH (IN.)

PIERCE TIME (SEC.)

METAL THICKNESS (IN.)

AIR PRESSURE STAND-OFF (PSIG) (IN.)

TRAVEL ARC SPEED VOLTS (IPM)

KERF WIDTH (IN.)

PIERCE TIME (SEC.)

110 120 125 130 140 145

1/8 1/8 1/8 1/8 5/32 3/16

0.1 0.3 1.0 2.75 N.R. N.R.

1/8 1/4 1/2 3/4 1 1-1/4

75 75 85 85 85 85

95 100 115 130 140 155

3/32 3/32 3/32 1/8 5/32 5/32

0.1 0.2 0.6 2.25 N.R. N.R.

100 45 27 15 10 7

3/16 3/16 1/4 1/4 5/16 5/16

40 & 50 Amp Data, Nozzle P/N 21330, Heat Shield P/N 21447

© 2010 STEEL AND PIPES, INC.

METAL THICKNESS (IN.)

1/16 1/8 3/16 1/4 3/8 1/2

184

ARC AIR CURRENT PRESSURE (AMPS) (PSIG)

STAND-OFF (IN.)

ARC VOLTS

TRAVEL SPEED (IPM)

KERF WIDTH (IN.)

PIERCE TIME (SEC.)

40 40 50 50 50 50

1/8 1/8 1/8 3/16 1/4 5/16

110 110 110 120 130 150

150 100 100 65 40 18

3/64 3/64 1/16 5/64 5/64 3/32

0.25 0.25 0.25 0.25 0.25 1.0

75 75 85 85 85 85

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

190 80 30 15 7 5


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Electrode - 21150

Baffle Tube - 21374

Heat Shield 70/100 amp - 21326 30/50 amp - 21447

AMPS P/N ORIFICE SIZE Cutting Nozzle 30 37329 .032 50 21330 .042 70 21329 .052 90 0558004269 .056 100 21328 .059

O-Ring - 488157 Insulator - 21373 Electrode Adaptor Assembly - 21332

Torch Body Ass’y - 21359

In Steel and Pipes

WE HAVE THE BRANDS YOU ARE LOOKING FOR: ™

SYSTEMA INOX

®

CHAMBERLAIN

®

We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

185

© 2010 STEEL AND PIPES, INC.

KincoPro ™


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-27 PLASMARC™ MANUAL CUTTING TORCH Designed for superior cutting performance and ease of handling, the PT-27 produces clean, exceptionally high quality cuts. • Most compact 80 amp torch on the market • Excellent cutting capacity—cuts up to 1 in. (25.4 mm); severs up to 1-1/4 in. (31.75 mm) • Uses shop air, cylinder air or nitrogen for superior versatility • Pilot arc starting—even starts through paint • Choice of 25 ft. (7.6 m) or 50 ft. (15.2 m) line length • Perfect electrode centering • Intermittent cutting capability for grate or expanded metal applications • Use with three cutting nozzle sizes for exceptional versatility • Improved spring-loaded seat eliminates head burn-out • One-year warranty

SPECIFICATIONS

Cuts up to 1 in. (25.4 mm); severs up to 1-1/4 in. (31.75 mm) Current Capacity ................................ 80 amps @ 100% duty cycle Air Supply ................................ 320 cfh @ 65 - 75 psig (150 1/min) Length of Service Lines ................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ................................................. 7.3 in. (185 mm) Length of Head ................................................ 3.06 in. (78 mm)

CONSOLES PCM-875, PCM-1125

PT-27 Cutting Performance

ORDERING INFORMATION All torch assemblies and replacement heads are supplied with the seat installed. PT-27, 75°, 25 ft. (7.6 m) line with ring terminal ................... 21661 PT-27, 75°, 50 ft. (15.2 m) line with ring terminal ................. 21662 PT-27, 75°, 25 ft. (7.6 m) European ...................................... 35548 For units manufactured prior to 4/31//95 (that have 2 twist lock plugs for torch hook-up) order: PT-27, 75°, 25 ft. (7.6 m) line with plug ................................ 21620 PT-27, 75°, 50 ft. (15.2 m) line with plug .............................. 21621

70

60

© 2010 STEEL AND PIPES, INC.

35

186

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


50-70 amp Spare Parts Kit ......................................................... 21623 80 amp Spare Parts Kit ............................................................... 21624 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ............................ 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals Deluxe: 1-3/4” - 42” (44.5 mm - 106 cm) Radius ........... 0558003258 Torch Guide Basic: 1-3/4” - 28” (44.5 mm - 71 cm) Radius .............. 0558002675 Stand-off Guide For proper stand-off distance when drag cutting ....................... 21420 90° Adaptor for PT-27 Torch To convert your 75° torch to a 90° torch .................................. 000222 Gouging Nozzle For gouging with PT-27 torch ...................................................... 35442 Gouging Shield To protect heat shield from spatter ............................................. 35443

Contents of PT-27 Spare Parts Kits DESCRIPTION

P/N

Heat Shield 50-70 amp Nozzle 80 amp Nozzle Swirl Baffle Electrode Fuse, 15 amp, 600 vdc Stand-off Guide Heat Shield, Long

21616 33369 33418 33367 33366XL 952137 21420 35547

P/N 21623 P/N 21624 50/70 A XT 80 A XT PCM-875 PCM-1125

2 4 1 3 1 1 -

P/N 35776 50/70 A PCM-875CE

2 4 1 3 1 1 -

4 1 3 4 1 2

*Seat - 0558003032

75° Torch Body - 21610

Electrode - 33366XL

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

OPTIONAL ACCESSORIES

Switch - 18224

Swirl Baffle - 33367

Switch Band- 33400 O-Ring - 85W51 Flex Support - 21218 Heat Shield - 21616 Long “CE” Heat Shield - 35547

Note: “CE” Items are used outside North America

P/N 33368 33369 33418 35442

ORIFICE SIZE .037* .047 .052 .093

*with feet for dragging on workpiece

IMPROVED

SEAT 0558003032 *NOTE: If your PT-27 torch still has the old style Valve Pin, you will need to retrofit the torch to the improved seat design.

NOTE: New and improved PT-27 spring-loaded seat dramatically im proves the torch head life by making the PT-27 resistant to damage due to improperly tightened consumables. This seat will not correct a torch head that is already burned out, but it will prevent torch head burnout on functioning torches.

ORDER: Seat and Installation Instructions (form 15-723) ..... P/N 0558003032 Installation Tool ....................................................... P/N 0558003027

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

187

© 2010 STEEL AND PIPES, INC.

Installation Tool 0558003027

AMPS Cutting Nozzle 30 50-70 80 Gouging Nozzle


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-31XL & PT-31XLPC PLASMARC™ TORCHES Designed for superior operator comfort, ESAB’s PT-31XL and PT-31XLPC are the most compact 50 amp torches on the market.

• • • • • • •

Excellent cutting capability—manually cuts up to 3/4 in. (19 mm); severs up to 1 in. (25.4 mm) New, durable torch cable prevents snagging on fixtures and materials Equipped with patented safety interlock feature Uses shop air, cylinder air or nitrogen for superior versatility High frequency starting—even starts through paint Uses patented “XT” consumables One-year warranty

PT-31XL

SPECIFICATIONS Cuts 3/4 in.; severs up to 1 in. Current Capacity ................................ 50 amps @ 100% duty cycle Air Supply ........................................ 275 cfh @ 75 psig (130 l/min.) Length of Service Lines ................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ............................................... 5.25 in. (133 mm) Length of Head ................................................ 2.25 in. (57 mm)

PT-31XLPC

CONSOLES

HandyPlasma ® 380, HandyPlasma® 550, and PowerCut ® 650

TORCH ORDERING INFORMATION HandyPlasma ® 380

PT-31XL, 75° head, 15 ft. (4.6 m) line ......................... 0558004482

HandyPlasma ® 550

PT-31XL, 75° head, 25 ft. (7.6 m) line ......................... 0558004498

PowerCut ® 650

PT-31XLPC, 75° head, 25 ft. (7.6 m) line .................... 0558003183 PT-31XLPC, 75° head, 50 ft. (15.2 m) line .................. 0558005334 Above torches are assembled with “XT” consumables PT-31XLPC, 75° head, 25 ft. (7.6 m) “CE” .................. 0558005393

© 2010 STEEL AND PIPES, INC.

Note: “CE” Items are used outside North America Instruction Manual, order number (PT-31XL) ................... F-14-246 Sales Literature, order number (PT-31XL) ..................... PAC-21039 Instruction Manual, order number (PT-31XLPC) ............... F-15-724 Sales Literature, order number (PT-31XLPC) ................ PAC-21090

188

OPTIONAL ACCESSORIES 30/40 amp Standard Spare Parts Kit (High Performance) ........ 0558003301* * HandyPlasma ® 380, HandyPlasma ® 550, and PowerCut ® 650

Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ...................................... 19765

Torch Guide Kits The Deluxe kit comes in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals Deluxe: 1-3/4 in. (44.5 mm) - 42 in. (106 cm) Radius .............. 0558003258 Basic: 1-3/4 in. (44.5 mm) - 28 in. (71 cm) Radius .................. 0558002675 NOTE: XT nozzles have extended shape.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


• Most compact 90 amp torch on the market • New, durable torch cable prevents snagging on fixtures and materials • Excellent cutting capacity —cuts up to 1-1/2 in. (38 mm) • Uses shop air, cylinder air or nitrogen for superior versatility Pilot arc starting —even starts through paint • Choice of 25 ft. (7.6 m) or 50 ft. (15.2 m) line length • • Excellent consumable life • Parts in place design • Patented torch and safety circuit • Exclusive 40 amp Drag Nozzle • One-year warranty

SPECIFICATIONS

Cuts up to 1-1/2 in. (38 mm) Current Capacity ........................................ 90 amps @ 100% duty cycle Air Supply ................ 350 cfh @ 75-80 psig (165 l/min @ 5.2 - 5.5 bar) Length of Service Lines .......................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ...................................................... 8.2 in. (208 mm) Length of Head ...................................................... 3.0 in. (76 mm)

CONSOLES

PowerCut ®875, PowerCut ®1125, PowerCut ®1250, and PowerCut ®1500

ORDERING INFORMATION PT-32EH, 90°, 25 ft. (7.6 m) line ............................... 0558003548 PT-32EH, 90°, 50 ft. (15.2 m) line ............................. 0558003549 Torches and torch body assemblies are supplied without electrode, nozzle, heat shield and valve pin. Order individual components shown with PT-32EH parts breakdown following.

PT-32EH CUTTING SPEEDS OUTPUT CURRENT 60, 70 & 90AMPS w/AIR @ 75psi (5.2bar)

OPTIONAL ACCESSORIES 50/70 amp Spare Parts Kit (PC-875 “CE”) ................... 0558004949 50/70 amp Spare Parts Kit (PC-875/1125) ................. 0558002822 70 amp Spare Parts Kit (PC-1250) ............................... 0558003508 70 amp Spare Parts Kit (PC-1250) “CE” ...................... 0558003560 90 amp Spare Parts Kit (PC-1500) .......................... 0558003062 90 amp Spare Parts Kit (PC-1500) “CE” ...................... 0558003557 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ....................... 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals. Deluxe: 1-3/4 in. (44.5 mm) - 42 in. (106 cm) Radius 0558003258 Basic: 1-3/4 in. (44.5 mm) - 28 in. (71 cm) Radius 0558002675 .. Stand-off Guide For proper stand-off distance when drag cutting ........... 0558002393 40 amp Drag Nozzle ................................................... 0558002908 Gouging Nozzle .......................................................... 0558003089 Heat Shield Gouging ................................................. 0558003090 Heat Shield Long “CE” .............................................. 0558003110 Drag Heat Shield Metal feet built into heat shield allows accurate standoff distance for drag cutting ........................................... 0558003374 Heavy Duty Drag Heat Shield Suitable for piercing and heavy industrial use ......... 0558004206

Instruction Literature, PT-32 .............................................. F-15-440 Instruction Literature, PT-32EH ......................................... F-15-747 Sales Literature, order number (PT-32EH) ..................... PAC-21091

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

189

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

Designed for superior cutting performance and ease of handling, the PT-32EH patented torch produces clean, exceptionally high quality cuts. The new ergonomic handle offers dual-switch capability, extra comfort and a non-slip grip.

© 2010 STEEL AND PIPES, INC.

PT-32EH PLASMARC™ MANUAL CUTTING TORCH


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-32EH Torch Head - 0558003412 O-Ring - 85W51 (Supplied with head)

Drag Heat Shield 0558003374 (Optional)

Valve Pin 0558001959 Electrode 0558001969

Heavy Duty Drag Heat Shield 0558004206 (Optional)

Heat Shield 0558001957 Long Heat Shield “CE” 0558003110

Nozzle 40 AMP - 0558002908 (Drag Cutting)* 50/70 AMP - 0558002618 (PC-875, PC-1125, & PC-1250) 90 AMP - 0558002837 (PC-1500 Only) *PC-875, PC-1125, 1250, & PC-1500

Note: “CE” Items are used outside North America

Contents of PT-32EH Spare Parts Kits PC-875/1125 P/N 0558002822 50/70 AMP

Description Part Number Qty Heat Shield Long 0558003110 Heat Shield 0558001957 2 50/70 amp Nozzle 0558002618 4 90 amp Nozzle 0558002837 40 amp drag Nozzle 0558002908 1 Electrode 0558001969 3 Valve Pin 0558001959 1 Fuse 2 amp, 600vdc 0558003075 Stand-off Guide 0558002393 1 Wrench 19129 1 Lubricant 17672 1 Note: “CE” Items are used outside North America

PC-875 (CE)

PC-1250

P/N 0558004949 P/N 0558003508 70 AMP 50/70 AMP

Qty 2 4 1 3 1 1 1 1

Qty. 2 4 1 3 1 1 1 1 1

PC-1250 (CE) P/N 0558003560 70 AMP 400V

PC-1500

PC-1500 (CE)

P/N 0558003062 90 AMP

Qty. 2 4 1 3 1 1 1 1 1

Qty. 2 4 1 3 1 1 1 1 1

P/N 0558003557 90 AMP 400V

Qty. 2 4 1 3 1 1 1 1 1

Acuerdate... © 2010 STEEL AND PIPES, INC.

SI AÚN NO ERES MIEMBRO DEL CLUB DE HERREROS ERO SOLICITA TU APLICACIÓN HOY CLUB DEL HERR 5 %* de descuento

AHORA EN PRODUCTOS:

en todos nuestros

CHAMBERLAIN

®

Nombre

190

_________

_________ _Fecha Exp._____

____________

a entos no aplican o negra r el descuento. Descu para poder aplicaa 1x1 y 1x2 de ningún grosor seaaplican a nto de la compra Descuentos de construcción, tuberí presentada al mome o, Visa, MC o ATH. aviso. Ciertas *La tarjeta debe serial, “metal deck”, “purlins”, varilla tiene que ser en efectiv descuentos sin previo mercancía en especque el descuento sea válido la ventael derecho de cancelar estos . galvanizada. Parada en la sucursal. Nos reservamos dorso de esta tarjeta mercancía recoji n, ver términos y condiciones al restricciones aplica

Socio#_______

®

_________

_______________

____________ _______________

CHAMBERLAIN

productos:

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PT-38 PLASMARC™ CUTTING TORCH

TORCHE SPECIFICATIONS: Cuts .................................................................................................................................................. 1-1/2 in. (38 mm); severs 1-3/4 in. (45 mm) Current Capacity .................................................................................................................................................... 90 amps @ 100% duty cycle Nominal Flow Rate ........................................................................................................................... 400 cfh @ 80 psig (189 l/min @ 5.5 bar) Length of Service Lines ....................................................................................................................................... 25 ft (7.6 m) or 50 ft (15.2 m) Dimensions Overall Length ................................................................................................................................................................................ 8.2 in. (208 mm) Length of Head ................................................................................................................................................................................. 3.0 in. (76 mm) PT-38 Torch, 25' (7.6 m) ....................................................................................................................................................................... 0558006786 PT-38 Torch, 50' (15.2 m) ..................................................................................................................................................................... 0558006787 Torches and torch body assemblies are supplied without gas baffle, electrode, nozzle, and retaining/shield cup. Order com-plete spare parts kits or individual components shown in PT-38 Spare Parts Kits or Consumables Breakdown section.

COMPATIBLE ESAB CONSOLES: Powercut-1300:

208-230/460 V Console ............................................. 0558007220 208-230/460 V Console BL ................................... 0558007220F 400 V CE Console ........................................................ 0558007224 400 V Console ............................................................... 0558007634 460 V Console ............................................................... 0558008320 575 V Console BL ........................................................ 0558007227

Powercut-1600:

208-230/460 V Console ............................................. 0558007230 208-230/460 V Console BL ................................... 0558007230F 400 V CE Console ........................................................ 0558007234 400 V Console ............................................................... 0558007636 460 V Console ............................................................... 0558008323 575 V Console BL ........................................................ 0558007237 208/230 V Console ...................................................... 0558008120 208/230 V Console BL .............................................. 0558008120F 230 V CE Console ......................................................... 0558008123 400 V CE Console ......................................................... 0558008135 400 V Console ................................................................ 0558008133 460 V Console ................................................................ 0558008127 575 V Console BL .......................................................... 0558008131

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

191

© 2010 STEEL AND PIPES, INC.

Powercut-900:


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

OPTIONAL ACCESSORIES: Gas Flow Measuring Kit .................................... p/n 19765 ("CE" units - 0558000739) Torch Guide Kit:

This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals. Deluxe, 1-3/4" - 42" (44.5 mm - 106 cm) Radius ............................................................... p/n 0558003258 Basic, 1-3/4” - 28” (44.5 mm - 71 cm) Radius .................................................................. p/n 0558002675

Powercut-1300/1600

Stand-off Guide Assembly 90 Amp ................................................................................... p/n 0558006614 Use to mantain constant stand-off distance.

Gouging 90 Amp: Gouging Nozzle 90 Amp ........................................................................................ p/n 0558007681 Gouging Heat Shield Assembly 90 Amp .......................................................... p/n 0558008186 *Note: Must use 90/100 Amp Gas Baffle ....................................................... p/n 0558004870

• • •

Powercut-900

Stand-off Guide Assembly 60 Amp ................................................................................... p/n 0558008592 Use to mantain constant stand-off distance.

Gouging 60 Amp: • •

Gouging Nozzle 60 Amp ....................................................................................... p/n 0558008588 Gouging Heat Shield Assembly 60 Amp .......................................................... p/n 0558008591

SPARE PARTS KITS: PT-38 Spare Parts Kits

© 2010 STEEL AND PIPES, INC.

0558007640 90 AMP PC-1600 CE

192

0558007639 90 AMP PC-1600

0558007642 70 AMP PC-1300 CE

0558007641 70 AMP PC-1300

0558008419 60 AMP PC-900 CE

0558008418 60 AMP PC-900

PART NUMBER

DESCRIPTION

3

3

3

3

3

3

0558005220

ELECTRODE

1

1

1

1

1

1

0558005217

GAS BAFFLE 30-70A

1

1

-

-

-

-

0558004870

GAS BAFFLE 90/100A

-

-

-

-

3

3

0558008417

NOZZLE 60 AMP

-

-

4

4

-

-

0558005219

NOZZLE 70 AMP

4

4

-

-

-

-

0558007680

NOZZLE 90 AMP

1

1

1

1

-

-

0558007682

NOZZLE DRAG 40 AMP

-

1

-

1

-

1

0558007549

RETAINING / SHIELD CUP

1

-

1

-

1

-

0558008094

RETAINING / SHIELD CUP LONG

3

3

3

3

3

3

2064062

O-RING .301ID .070W Nitrile

1

1

1

1

1

1

17672

GREASE SILICON DOW DC-111 (1/4 oz)

1

1

1

1

1

1

0558001379

FUSE MIDGET SLO-BLO 2A 600V

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


0558008094 0558007549

40A

0558008094

0558005219 0558007680 0558007682

0558006613

80 PSI 5.5 BAR

0558005220 0558005220 0558005220

0558006611

70A

0558007549

0558005219 0558006614

40A

0558007549

0558007682

0558006601

0558005217

O-RING JOINT TORIQUE 85W51 GREASE 17672

0558005220

0558006601

0558006614

0558005217

PT-38 O-RING 2064062

GOUGING 0558006611 0558007681 0558004870

0558001379

0558005220 0558008186 0558005217

GUIDE DE HAUTEUR 0558006613 0558006611

80 PSI 5.5 BAR

0558005217 0558004870

P/N 0558954137-C 8/08

COUPAGE

70A 90A

GREASE GRAIS SE 17672

GOUGING GOUGEAGE 0558006611 0558007681 0558004870

O-RING JOINT TORIQUE 2064062

FUSIBLE 2A 600V 0558001379

0558008186

*

90A

PT-38 CE

CUTTING

0558008094

0558007680

0558005220

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CONSUMABLES BREAKDOWN PC -1300/1600:

0558004870

0558008094

0558005219

0558005220

0558005217

40A

0558008094

0558007682

0558005220

0558005217

0558006613

80 PSI 5.5 BAR

0558006611

0558006601

GREASE 17672

GOUGING 0558006611 0558007681 0558004870

O-RING 2064062

0558001379 0558006614

0558008186

*

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

193

© 2010 STEEL AND PIPES, INC.

70A

P/N 0558954137-C 8/08

O-RING 85W51


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CONSUMABLES BREAKDOWN PC-900:

PT-38

COUPAGE

60A

0558007549

40A

0558007549

0558008417

0558005220

0558005217 O-RING JOINT TORIQUE 85W51

0558007682

0558005220

0558005217

GREASE GRAIS SE 17672

GUIDE DE HAUTEUR 0558008590 0558006611

80 PSI 5.5 BAR

60A

0558006602

0558008592

GOUGING GOUGEAGE 0558006611 0558008588 0558005217

FUSIBLE 2A 600V 0558001379

0558008591

CUTTING

0558008417

0558008094

0558005220

O-RING JOINT TORIQUE 2064062

0558005217

PT-38 CE O-RING 85W51

0558007682 0558008417

COUPAGE

0558005220 0558005220

0558005217 0558005217 O-RING JOINT TORIQUE 85W51 GREASE 17672 GOUGING

0558008590

80 PSI 5.5 BAR

© 2010 STEEL AND PIPES, INC.

40A

194

0558007549

0558006611

0558008592 0558007682

0558006602

0558006611

0558005220 0558008591

PT-38 O-RING 2064062

0558008588 0558005217

0558005217

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

0558001379

P/N 0558954166-A 1/09

0558008094 40A 60A 0558007549


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

CONTENTS OF SPARE PARTS KIT (HP-380, HP-550, PC-650) DESCRIPTION

P/N

Heat Shield Long Heat Shield 30A High Perf. Nozzle 35/40A Extd. Life Nozzle Swirl Baffle Electrode Lubricant (.25 oz)

PT-31XL P/N 0558003301 30/40A

PT-31XL P/N 21980 35/40A S/P

1 1 3 0 1 2 1

1 1 0 3 1 2 1

36284 20282 20860 21008 20463 20862 17672

DESCRIPTION

P/N

Heat “CE” Shield Long 30 A High Performance Nozzle Swirl Baffle Electrode Lubricant (.25 oz)

PT31XLCE P/N 0558005392 30/40A “CE”

36284 20860 20463 20862 17672

1 3 1 2 1

O-ring - 950790 Torch Body - 20072 (includes Seat - 19679 and O-ring - 950790)

Plunger - 20324

Switch - 18224

Electrode - 20862

Switch Band - 18207 Swirl Baffle - 20463

Seat - 19679

Heat Shield - 20282 Long “CE” Heat Shield - 36284 AMPS Cutting Nozzle 30/40 35/40 50

P/N

ORIFICE SIZE

20860 21008 20861

.037 - High Performance .042 - Extended Life .046 - For use on 50 amp machines only

Flex Support - 18225

Note: “CE” Items are used outside North America

REMEMBER... • ELECTRODES & TIG RODS • GAS WELDING & CUTTING SETS TORCHES, REGULATORS, TIPS, ETC. • WELDING CABLES & ACCESSORIES • TIG TORCHES & ACCESSORIES • PURGING PAPER, TAPES, ETC.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

195

© 2010 STEEL AND PIPES, INC.

WE HAVE WHAT YOU NEED:


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PTW-20 Premium Water-Cooled Model Light and easy to use, these torches give you the power of maximum versatility and maneuverability. A molded, knurled handle gives you a fast grip so you can focus on the weld. "F" model torches feature flexible heads to increase your comfort and get you into tighter spaces. "V" model torches provide a convenient gas control valve to change shielding gas settings at the torch. Available with several amperage ratings in both air-cooled and water-cooled versions. Whether you are an occasional TIG welder, fabrication job shop or production welder, one of the Pro-Torch TIG torches is right for you. • Choose between a wide range of both air-cooled and watercooled torches in various amperage ranges to meet the performance needs of the professional. • Select "F" model torches feature flexible heads for significantly greater comfort and access to tight spaces. • Select "V" model torches have a convenient gas control valve on the torch to quickly and easily control the shielding gas flow when a gas solenoid valve is not "built-in" the power source. • Select models available with new Ultra-Flex™ Cables for ultimate comfort and maneuverability. • Comfortable knurled handle for a non-slip sure grip for precise control. • Molded lip/ridge on the torch handle for easy connecting of a zippered cable cover. Allows cable cover to be securely attached to torch handle. • All Pro-Torch TIG torches are made from the highest quality materials to assure high performance and long life. • One-year Lincoln warranty on torch.

PHYSICAL SPECIFICATIONS

Weight:6 lbs. (2.7 kgs. ) Dimensions (in) H x W x D : 2 x 13 x 13 Dimensions (mm) H x W x D : 50.8 x 330.2 x 330.2

PROCESSES

© 2010 STEEL AND PIPES, INC.

TIG

MODEL PTW-20

196

RATED AMPERAGE 250 250

TUNGSTEN RANGE IN.(MM) .020-1/8 (0.5-3.2)

LENGTH FT.(M) 12.5 (3.8) 25.0 (7.6)

NUMBER OFCABLES 3 3

PRODUCT NUMBER K1784-3 K1784-4

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


PART NO.

INDUSTRY REF. NO.

DESCRIPTION

S IZE IN. (MM)

1 1 1 1 1 1 1 1 1 1

KP2035-4B1 KP2029-3B1 KP2029-4B1 KP2029-5B1 KP2031-3B1 KP2031-4B1 KP2031-5B1 KP2017-2B1 KP2017-3B1 KP2017-4B1

41V24 13N22 13N23 13N24 13N27 13N28 13N29 13N09 13N10 13N11

Back Cap Collet Collet Collet Collet Body Collet Body Collet Body Alumina Nozzle Alumina Nozzle Alumina Nozzle

Long 1/16 (1.6) 3/32 (2.4) 1/8 (3.2) 1/16 (1.6) 3/32 (2.4) 1/8 (3.2) 5/16 (8.0) 3/8 (10.0) 7/16 (11.0)

1 1 1

Tungsten Electrode, 2% Thoriated 1/16"x7.0" (1.6 x 178mm) Tungsten Electrode, 2% Thoriated 3/32"x7.0" (2.4 x 178mm) Tungsten Electrode, 2% Thoriated 1/8"x7.0" (3.2 x 178mm)

QTY.

Parts shown are not actual size.

KP2414-1 GAS LENS PARTS KIT (FOR PTA-9 OR PTW-20 SERIES TORCHES) PART NO.

INDUSTRY REF. NO.

DESCRIPTION

1 1 1 1 1 1 1 1 1 1

KP2035-4B1 KP2029-2B1 KP2029-3B1 KP2029-4B1 KP2033-2B1 KP2033-3B1 KP2033-4B1 KP2019-2B1 KP2019-3B1 KP2019-4B1

41V24 13N21 13N22 13N23 45V42 45V43 45V44 53N59 53N60 53N61

Back Cap Collet Collet Collet Gas Lens Collet Body Gas Lens Collet Body Gas Lens Collet Body Gas Lens Nozzle Gas Lens Nozzle Gas Lens Nozzle

1 1 1

Tungsten Electrode, 2% Thoriated .040 Tungsten Electrode, 2% Thoriated 1/16” Tungsten Electrode, 2% Thoriated 3/32”

QTY.

Parts shown are not actual size.

S IZE IN. (MM) Long .040 1/16” 3/32” .040 1/16” 3/32” #5 #6 #7

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

KP510 (FOR PTW-20 SERIES TORCHES)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

197

© 2010 STEEL AND PIPES, INC.

We Fabricate Anything in Steel, Stainless Steel or Aluminum


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

PUSH-PULL GUNS

PANTHER™ GOOSENECK-STYLE AIR-COOLED OR WATER-COOLED PUSH-PULL GUNS Select Panther™ gooseneck-style guns for advanced aluminum welding applications. Feature dual-driven rolls, full-length conduit, innovative ball & socket strain relief and precise multi-turn WFS control. Air-cooled rated 300A @ 60% duty cycle w/Argon. Water-cooled rated 400A @100% duty-cycle w/Argon.

Cougar™ push-pull guns are intended for those operators who prefer an upright pistol-grip design for aluminum welding fabrication or production. Feature Sure-Grip™ handle, integrated strain relief and multi-turn potentiometer. Rated 300A @ 60% duty cycle w/Argon.

Order: K2874-1 for Air Cooled, 15 ft. (4.5 m) K2874-2 for Air Cooled, 25 ft. (7.6 m) K2874-3 for Air Cooled, 50 ft. (15.2 m) K2875-2 for Water Cooled, 25 ft. (7.6 m) PRODUCT NAME Panther™ Air Cooled Panther™ Air Cooled Panther™ Air Cooled Panther™ Water Cooled Cougar™ Air Cooled Cougar™ Air Cooled

PRODUCT NUMBER K2874-1 K2874-2 K2874-3 K2875-2 K2704-2 K2704-3

COUGAR™ PISTOL-GRIP AIR-COOLED PUSH-PULL GUNS

Order: K2704-2 for Air Cooled, 25 ft. (7.6 m) K2704-3 for Air Cooled, 50 ft. (15.2 m)

AMPERAGE RATING Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 400A @ 100% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle

WIRE DIAMETER RANGE IN. (MM) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6)

INNERSHIELD® GUNS

© 2010 STEEL AND PIPES, INC.

(FLUX-CORED SELF-SHIELDED)

K126-1 - 10ft. K126-2 - 15ft.

Rated 350 amps. Use .062-3/32 in. (1.6-2.8 mm) diameter wires. Choose from 10 or 15 ft. (3 or 4.5 m) cable lengths.

198

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

CABLE LENGTH FT. (M) 15 (4.5) 25 (7.6) 50 (15.2) 25 (7.6) 25 (7.6) 50 (15.2)


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS

T.SAB730

ANGLE GRINDERS - SAB 730 PRODUCT ADVANTAGES • Protection guard • Auxiliary handle • Serivce Key

T.TV509

ABRASIVE DISC CHOP SAW - TV 509 PRODUCT ADVANTAGES • Powerful • Precise • Strong structure • Ergonomic handle • Bevel cut 0°-45° STANDARD EQUIPMENT • 1 Abrasive disc for metal • Service key

T.SA21-180

ANGLE GRINDERS - SA 21-180 PRODUCT ADVANTAGES • Lightweight and versatile • Particularly suitable for workshops • 3 positions of the side handle

PERCUSSION DRILLS - TM 710 AK PRODUCT ADVANTAGES • Self-locking chuck with safety lock • Reversible • Electronic • Percussion STANDARD EQUIPMENT • Auxiliary handle with depth regulation • Carry case

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

199

© 2010 STEEL AND PIPES, INC.

T.TM710AK

STANDARD EQUIPMENT • Protection guard • Auxiliary handle • Serivce Key


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS

T.D21002

3/8" VSR DRILL-D21002

T.DWD110K

• All ball-bearing construction provides greater durability and longer tool life • Contoured textured handle provides better gripping surface and reduces user fatigue • Glass-filled nylon housing is durable, impact resistant and provides lower maintenance cost • Belt clip conveniently holds tool and frees user's hands for other work

3/8" (10MM) VSR PISTOL GRIP DRILL KIT WITH KEYLESS CHUCK

SPECIFICATIONS:

SPECIFICATIONS

CHUCK SIZE KEYLESS CHUCK AMPS NO LOAD SPEED MAX WATTS OUT CAPACITY IN WOOD (SPADE BIT) CAPACITY IN WOOD (HOLE SAW) CAPACITY IN STEEL (TWIST BIT) CAPACITY IN WOOD (SELF-FEED) CAPACITY IN WOOD (AUGER BIT) CAPACITY IN STEEL (HOLE SAW) GEAR REDUCTION HANDLE STYLE ANTI-SLIP GRIP ANTI-LOCK CONTROL SPINDLE LOCK TOOL WEIGHT SHIPPING WEIGHT CLUTCH

3/8" KEYED 6.0AMPS 0-2,500RPM 480W 1" 1-1/8" 3/8" N/A" N/A" N/A" SINGLE PISTOL GRIP DESIGN NO N/A 3.2LBS 3.65LBS

• 7.0 Amp motor delivers high performance in heavy-duty applications • 3/8" ratcheting keyless chuck for greater bit retention • 0-2,500 RPM, VSR trigger for versatility in drilling and fastening applications • Soft grip handle design offers increased gripping surface and comfort • All ball-bearing construction provides greater durability and longer tool life CHUCK SIZE KEYLESS CHUCK AMPS NO LOAD SPEED MAX WATTS OUT CAPACITY IN WOOD (SPADE BIT) CAPACITY IN WOOD (HOLE SAW) CAPACITY IN STEEL (TWIST BIT) CAPACITY IN WOOD (SELF-FEED) CAPACITY IN WOOD (AUGER BIT) CAPACITY IN STEEL (HOLE SAW) GEAR REDUCTION HANDLE STYLE ANTI-SLIP GRIP ANTI-LOCK CONTROL SPINDLE LOCK TOOL WEIGHT SHIPPING WEIGHT CLUTCH

3/8" YES 7.0AMPS 0-2,500RPM 650W 1" 1-1/8" 3/8" N/A" N/A" N/A" SINGLE PISTOL GRIP DESIGN YES NO N/A 4.1LBS 6.4LBS

T.D25213K

© 2010 STEEL AND PIPES, INC.

1" D-HANDLE THREE MODE SDS HAMMER-D25213K • 2.5 ft-lbs of impact energy provide fast drilling and powerful chipping • 8.0 Amp motor provides high performance and overload protection • Reverse feature assists in the removal of fasteners • Variable speed allows for precise hole placement on work surface • Factory-set clutch reduces sudden, high torque reactions if bit jams • 360° side handle adjusts easily for preference or use in tight spaces

200

SPECIFICATIONS

OPTIMAL CONCRETE DRILLING AMPS IMPACT ENERGY NO LOAD SPEED BLOWS/MIN CHIPPING CLUTCH WOOD/STEEL DRILLING SWITCH TOOL LENGTH TOOL WEIGHT

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

5/32" - 5/8" 8.0AMPS 2.5FT-LBS 0-1,150RPM 0-4,300BPM YES YES WITH ADAPTOR" 16.6" 6.1LBS


T.DW304PK

10.0 AMP RECIPROCATING SAW KIT-DW304PK T.D21710

D21710K -PERCUSSION DRILL

• Variable speed control with forward and reverse mode to suit different materials, Dust sealed switch for added durability • Compact and light weight to enhance user comfort, Jampot construction design for added durability and ease of service SPECIFICATIONS:

CHUCK CAPACITY: POWER INPUT: POWER OUTPUT: MAX TORQUE: NO LOAD SPEED: MAX. DRILLING CAPACITY [WOOD]: MAX. DRILLING CAPACITY [STEEL]: MAX. DRILLING CAPACITY [CONCRETE]: SPINDLE THREAD: WEIGHT: LENGTH MM: HEIGHT: VOLTAGE:

13 MM 600 WATTS 300 WATTS 12 NM 0-2600 RPM 25 MM 13 MM 16 MM 1/2IN X 20 U.N.F 1.8 KG 280 MM 185 MM 240V

• 4-position blade clamp allows for flush cutting and increased versatility • Powerful 10.0 Amp motor designed for heavy-duty applications • Keyless lever-action blade clamp for quick and easy blade changes • 0-2,800 strokes per minute and 1-1/8" stroke length deliver fast cutting • Variable speed trigger allows user to instantly control speed from 0 to dialed setting SPECIFICATIONS

AMPS STROKES/MIN STROKE LENGTH KEYLESS BLADE CLAMP 4 POSITION BLADE CLAMP ADJUSTABLE SHOE VARIABLE-SPEED TRIGGER VARIABLE-SPEED DIAL ORBITAL ACTION ANTI-SLIP COMFORT GRIP TOOL LENGTH TOOL WEIGHT

10AMPS 0-2,800SPM 1-1/8" LEVER YES FIXED YES NO NO NO 17.5" 7.0LBS

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS

T.DW292K

1/2" (13MM) IMPACT WRENCH KIT-DW292K

T.D25600KP

1-3/4" SDS MAX ROTARY HAMMER KIT-D25600K

SPECIFICATIONS

AMPS NO LOAD SPEED MAX TORQUE IMPACTS/MIN TOOL LENGTH TOOL WEIGHT

7.5AMPS 2,100RPM 345FT-LBS 2,700IPM 11-1/4" 7.0LBS

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

201

© 2010 STEEL AND PIPES, INC.

• 345 ft-lbs of deliverable torque in forward and reverse • 1/2" detent pin anvil • AC/DC forward/reverse rocking switch • Soft grip allows for superior ergonomics • Ball bearing construction for increased durability


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS

T.D28111S-B3

4-1/2” ANGLE GRINDER-D28111 T.DW328

DEEP CUT VARIABLE SPEED PORTA - BAND® SAW-DW328

• Powerful 6.0 Amp motor designed to withstand jobsite applications • 4-3/4” deep cut capacity for round or rectangular stock • Dual bearing blade guide rollers increase durability in the blade support system • Speed control knob allows user to tailor the blade speed for various applications • AC/DC switch allows use in both alternating and direct current • Blade tracking adjustment increases blade life by providing better blade tracking SPECIFICATIONS

AMPS FT/MIN MAX CAPACITY (ROUND) MAX CAPACITY (RECTANGULAR) FRONT HANDLE STYLE LED LIGHT AC/DC CAPABILITY RUBBER BUMPERS TOOL LENGTH TOOL WEIGHT

• Small girth allows comfortable griping resulting in superior ergonomics • Fully leaded stator windings for increased motor durability • Abrasion protected field for increased durability • Anti lock flange prevents flanges from permanently locking up and locking the disc on • Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability • One piece brush arm prevents brush hang up in extreme conditions • The low profile gear case allows access in confined areas • Side positioned spindle lock gives greater protection to button when using in confined spaces SPECIFICATIONS

POWER INPUT NO LOAD SPEED SPINDLE LOCK SIDE HANDLE TOOL WEIGHT MAX. DISC DIAMETER SPINDLE THREAD POWER OUTPUT WEIGHT LENGTH HEIGHT HAND/ARM VIBRATION HAND/ARM VIBRATION UNCERTAINTY K 1 (VIBRATION) SOUND PRESSURE UNCERTAINTY K 1 (SOUND) ACCOUSTIC PRESSURE UNCERTAINTY K 2 (SOUND)

6.0AMPS 100-245FPM 4-3/4" 4-1/2" X 4-3/4" POMMEL NO YES NO 21.5" 14.0LBS

850 WATTS 10000 RPM

115 MM M14 360 WATTS 1.6 KG 270 MM 80 MM GRINDING SANDING

T.D28700-B3

14" (355MM) CHOP SAW-D28700

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS

AMPS NO LOAD SPEED HP QUICK LOCK VISE WHEEL ARBOR WHEEL DIAMETER MAX CAPACITY (ROUND) MAX CAPACITY (RECTANGULAR) BLADE CHANGE TOOL LENGTH TOOL WEIGHT

202

15AMPS 3,800RPM 4HP YES 1" 14" 4-1/2" 4-3/4 X 5-1/3" WRENCH 21" 35.0LBS

• 15.0 Amp/4.0 HP (maximum motor HP) motor provides overload protection, increasing performance and durability • Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity • Quick-Lock Vise allows for fast clamping on different size materials to increase productivity • 45° pivoting fence allows for fast and accurate angle cuts • Steel base allows user to weld jigs or stops directly onto the base • Spindle Lock allows user to make wheel changes quickly and easily, saving time and money • Integrated top handle allows the saw to be carried around easily • Heavy-duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain • Adjustable spark guard allows the users to direct sparks away from the work area • On-board wheel change wrench allows for convenient storage and greatly reduces the risk of lost wrenches • Compression spring provides smoother movement and increased durability versus torsion springs

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


T.D28491

METAL WORKING -7” LARGE ANGLE GRINDERS - 180MM GRINDER /15 AMP • Abrasion protected motor for increased durability • Two position side handle allows the user to optomise handle postion to give maxium comfort. • Spindle lock for quick wheel changes • Brush window allows quick brush replacement STANDARD • Protective guard • Side handle • Inner and outer disc flanges • Spanner

SPECIFICATIONS

POWER INPUT NO LOAD SPEED MAX. DISC DIAMETER SPINDLE THREAD WEIGHT LENGTH HEIGHT POWER OUTPUT

2000 WATTS 8500 RPM 180 MM M14 4.6 KG 490 MM 151 MM 1054 WATTS

T.DCD950KX

1/2" (13MM) 18V CORDLESS XRP™ HAMMERDRILL/DRILL/DRIVER KIT • XRP™ extended run-time batteries provide long run-time and battery life • Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time • Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping strength • LED worklight provides increased visibility in confined spaces • High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling and fastening applications • Best in class length for improved balance and better control SPECIFICATIONS

Model ECO-50AK has an automatic cooling/lubrication system built into the arbor

VOLTAGE MAX POWER NO. OF SPEED SETTINGS MAX RPM MAX BPM CLUTCH SETTINGS CHUCK SIZE CHUCK TYPE TOOL WEIGHT

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS

18V 450UWO 3 0-500/0-1,250/0-2,000 0-8,500/0-21,250/0-34,000 22 1/2" METAL, SELF-TIGHTENING 6.25LBS

STANDARD EQUIPMENT INCLUDES: • Auto Chuck cutter holder • Carrying case • Safety chain • Carabin hook • Allen keys

T.DRILL.ECO-50AK

• Drills up to 2" diameter holes with Annular Cutters • Lightweight and portable at 29 lbs. • Strong 10.5 Amp motor and two-speed gearbox • HD dual-coil magnet has holding strength of 3750 lbs. • Easy "twist and lock" keyless arbor for cutters • Compact height of 16-1/2" allows drilling in small spaces • With a 3/4" chuck (Part No. IBK-22), these models easily convert to standard drill presses with a 5" stroke for up to 7/8" dia. twist drills

SPECIFICATIONS

MODEL NO.: MOTOR POWER: WEIGHT: HOLE CAPACITY: TWIST DRILL CAPACITY: SPEEDS: MAGNET BASE SIZE: DIMENSIONS: MAGNETIC FORCE (1" PLATE): ARBOR BORE:

ECO-50AK 10.5 AMP / 110 VOLT* 29 LBS. 2" DIA. 7/8" DIA. GEAR 1: 250 RPM, GEAR 2: 450 RPM 6-1/2" L X 3-1/2" W 16-1/2" H X 9" L X 6-3/8" W 3750 LBS. 3/4"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

203

© 2010 STEEL AND PIPES, INC.

ECO-50AK PORTABLE MAGNETIC DRILL


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS Model MDM-40 is a powerful hole cutting machine for steel fabricators, bridge contractors and plant maintenance.

T.DRILL.MDM40

MDM-40 PORTABLE MAGNETIC DRILL • Powerful hole cutting machine for steel fabricators, bridge contractors and plant maintenance • Compact height of 13" allows drilling in tight spaces • Lightweight and portable at only 24 lbs. for use on the job site or in the shop • Strong 9.25 Amp double-insulated motor • One-piece motor mount and arbor support for added strength and stability • High-density dual-coil magnet has holding strength of 2640 lbs. • Drills up to 1-1/2" diameter holes with Annular Cutters • One-year warranty SPECIFICATIONS

STANDARD EQUIPMENT INCLUDES: • Auto lubrication • Carrying case • Safety strap • Carabin hook, • Gloves • Safety glasses • Ear protection • Allen keys.

MODEL NO.: MOTOR POWER: WEIGHT: HOLE CAPACITY: SPEED: MAGNET BASE SIZE: DIMENSIONS: MAGNETIC FORCE (1" PLATE): ARBOR BORE: AUTOMATIC LUBRICATION:

MDM-40 9.25 AMP / 110 VOLT* 24 LBS. 1-1/2" DIA. 440 RPM 6-1/2" L X 3-1/4" W 13" H X 9-1/2" L X 7" W 2640 LBS. 3/4" INCLUDED

*220 VOLT / 50HZ ALSO AVAILABLE

UNIBROACH® HIGH-SPEED STEEL (HSS) CUTTERS • CNC precision ground for fast penetration,accuracy and long life • Drill holes 3 times faster than twist drills • Produce reamed-quality burr-free holes and solid slugs • Reduce machine size and weight • Cutting edges are resharpenable • Eliminate time-consuming,costly pilot holes and step drilling

© 2010 STEEL AND PIPES, INC.

Annular Cutters are the standard hole-making drills in the industry.Ideal for heavy-duty use on-site or in the shop,our HSS Unibroach cutters are available in the following sizes: 1" drill depth – ø 7/16" to ø 5" 2" drill depth – ø 7/16" to ø 5" 3" drill depth – ø 3/4" to ø 5" CNC-ground flutes run the length of the cutter for efficient chip clearance.This increases drilling productivity and decreases cutter breakage

204

ITEM CODE

DESCRIPTION

T.DRILL.BIT.100 T.DRILL.BIT.106 T.DRILL.BIT.112 T.DRILL.BIT.125 T.DRILL.BIT.137 T.DRILL.BIT.150 T.DRILL.BIT.175 T.DRILL.BIT.5 T.DRILL.BIT.50 T.DRILL.BIT.56 T.DRILL.BIT.58 T.DRILL.BIT.687 T.DRILL.BIT.75 T.DRILL.BIT.812 T.DRILL.BIT.875 T.DRILL.BIT.94

CUTTER 1" X 2" DEPTH CUTTER 1-1/16" X 2" DEPTH CUTTER 1-1/8" X 2" DEPTH CUTTER 1-1/4" X 2" DEPTH CUTTER 1-3/8" X 2" DEPTH CUTTER 1-1/2" X 2" DEPTH CUTTER 1-3/4" X 2" DEPTH CUTTER 1/2" X 1" CUTTER 1/2" X 2"DEPTH CUTTER 9/16" X 2" DEPTH CUTTER 5/8" X 2" DEPTH CUTTER 11/16" X 2" DEPTH CUTTER 3/4" X 2" DEPTH CUTTER 13/16" X 2" DEPTH CUTTER 7/8" X 2" DEPTH CUTTER 15/16" X 2" DEPTH

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

POWER TOOLS T.CS2000P-B3

CHOP SAW 2000WATT -14” (35MM) PROFESSIONAL T.G720K

4-1/2”(115MM) ANGLE GRINDER PROFESSIONAL 800W SPECIFICATIONS

POWER SPEED SPINDLE CORD

800 W 10000RPM 5/8”-11/M14 2M

KD975KA

710W 1.8J PNEUMATIC HAMMER DRILL • 710W power - Powerful unit for serious drilling • High performance, non slip SDS-Plus chuck for quick accessory changing • 1.8 Joule of impact energy allows the user to drill into hard materials such as concrete and granite • Powerful Pneumatic Hammer 0-5180 impacts per minute. • Variable speed offers more control and versatility • Secondary handle to provide additional control • Depth guide to assist the user when a predetermined depth is needed.

T.PW1550

POWER VOLTAGE CHUCK HAMMER MAX.CAPACITY-STEEL MAX.CAPACITY-WOOD MAX.CAPACITY-CONCRETE REVERSE SPEED NO LOAD SPEED CABLE LENGHT ADJUSTABLE DEPTH STOP ADJUSTABLE SECOND HANDLE LOCK-ON SWITCH KIT BOX

710 W 230V SDS+ YES 13MM 30MM 22MM YES VARIABLE 0-980 RPM 3M YES YES YES YES

1500 WATTS PRESSURE WASH • Turbo nozzle, 60% more power • Includes wash brush • On boeard accessories storage • Easy and confortable to move SPECIFICATIONS

POWER WATER FLOW MAX. PRESSURE

710 W 1,6GPM 1700PSI

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

205

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

COMPRESSORS/PARTS COMPRESSOR 150 PSI 20 GAL. OIL-FREE HORIZONTAL

175 PSI 80 GAL. STATIONARY

Model Number: TC.C5101

Model Number: TC.C7550

Model Number: TC.C7501

AIR HOSE VIN 3/8 X 50 Model Number: TC.60250

AIR HOSE VIN 3/8 X 25

17 PC ACCESSORY KIT

Model Number: TC.60325

Model Number: TC.PAK253

1/4” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-F

1/4” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-M

3/8” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 3/8”-F

Model Number: TC.PAB251

Model Number: TC.PAB252

Model Number: TC.PAB381

3/8” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-M

1/4” UNIVERSAL QC PLUG, 1/4”-F

1/4” UNIVERSAL QC PLUG, 1/4”-M

Model Number: TC.PAP251

Model Number: TC.PAP252

3/8” UNIVERSAL QC PLUG, 3/8”-F

3/8” UNIVERSAL QC PLUG, 3/8”-M

3/8” FILTER

Model Number: TC.PAP381

Model Number: TC.PAP382

3/8” REGULATOR

3/8” FILTER/REGULATOR

AIR COMPRESSOR OIL

Model Number: TC.PF383

Model Number: TC.PF384

Model Number: TC.PAS1

Model Number: TC.PAB382

© 2010 STEEL AND PIPES, INC.

135 MAX PSI STATIONARY 60 GAL. 240V 3.0 RUNNING HP

206

Model Number: TC.PF382

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

STAINLESS STEEL AND METAL 1/4” SHANK PART NUMBER

DESCRIPTION

DIMENSIONS

240.006.SA1DC 240.006.SA3DC 240.006.SA5DC

CYLINDRICAL SS(SA1DC) CYLINDRICAL SS(SA3DC) CYLINDRICAL SS(SA3DC)

1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"

240.006.SB1DC 240.006.SB3DC

CYLINDRICAL END CUT SS(SB1DC) CYLINDRICAL END CUT SS(SB3DC)

1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4"

240.006.SC1DC 240.006.SC3DC 240.006.SC5DC

CYLINDRICAL BALL NOSE SS(SC1DC) CYLINDRICAL BALL NOSE SS(SC3DC) CYLINDRICAL BALL NOSE SS(SC5DC)

1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"

240.006.SD1DC 240.006.SD3DC

BALL SHAPE SS(SD1DC) BALL SHAPE SS(SD3DC)

1/4" X 1/4" X 1/4" 3/8" X 3/8" X 1/4"

240.006.SE3DC

OVAL SHAPE SS(SE3DC)

3/8" X 5/8" X 1/4"

240.006.SF1DC 240.006.SF3DC 240.006.SF5DC

ROUND TREE SHAPE SS(SF1DC) ROUND TREE SHAPE SS(SF3DC) ROUND TREE SHAPE SS(SF5DC)

1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"

240.006.SG1DC 240.006.SG3DC 240.006.SG5DC

POINT TREE SHAPE SS(SG1DC) POINT TREE SHAPE SS(SG3DC) POINT TREE SHAPE SS(SG5DC)

1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"

240.006.SL1DC 240.006.SL3DC

14˚ ANGLE SHAPE SS (SL1DC) 14˚ ANGLE SHAPE SS (SL3DC)

1/4" X 5/8" X 1/4" 3/8" X 1-1/16" X 1/4"

240.006.SM4DC

POINT CONE SHAPE SS(SM4DC)

3/8" X 3/4" X 1/4"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

207

© 2010 STEEL AND PIPES, INC.

CARBIDE BURS


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

HOLE SAWS, ARBORS, SHANKS BI-METAL HOLE SAW ITEM CODE

HOLE SAW DIAMETER

250.019.60168 250.019.60170 250.019.60172 250.019.60176 250.019.60178 250.019.60180 250.019.60182 250.019.60184 250.019.60186 250.019.60188 250.019.60189 250.019.60191 250.019.60192 250.019.60194

5/8” 3/4“ 7/8” 1-1/8 1-1/4“ 1-3/8” 1-1/2” 1-5/8” 1-3/4” 1-7/8” 2” 2-1/8” 2-1/4” 2-3/8”

A4 HOLE SAW ARBOR WITH DRILL FITS HOLE SAW DIAMETER INCH/MM

9/16" – 1-3/16" (14-30 mm)

ITEM CODE

250.019.55144

SHANK SIZE (INCH/MM)

SCREW THREAD

1/4" (6.5mm) Hex

1/2-20

1/4” PILOT DRILL FOR ARBOR KA4 250.019.60164 • High Speed Steel.

UNIFIED SHANK® ASSORTMENT PACKS WOOD CUTTING ASSORTMENT PACK: 250.019.68748 • Includes one each: BU36, BU46, BU38, BU310T and BU214S BU1 68748

© 2010 STEEL AND PIPES, INC.

MULTI-PURPOSE ASSORTMENT PACK: 250.019.68749 • Includes one each: BU46, BU310T, BU214, BU224S and BU232 BU2 68749 METAL CUTTING ASSORTMENT PACK: 250.019.68750 • Includes one each: BU41014, BU214, BU224, BU224S and BU232 BU3 68750

208

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


STRAIGHT SHAPE GENERAL PURPOSE RECIPROCATING BLADES DIMENSIONS (LENGTH x WIDTH x THICKNESS)

20 BLADE PACKS CAT. NO. ITEM CODE

6" x 3/4" x 035" B624-20 152mm x 19mm x 0 90mm B618-20 8" x 3/4" x 035" 203mm x 19mm x 0 90mm B818-20

250.019.20114 250.019.20113 250.019.20127

K145 CLOSED GRIP HIGH-TENSION HEAVY DUTY HACKSAW FRAME 250.019.0011 • The K145 is a professional quality hightension frame that provides an easy to use and efficient adjustment lever Its comfortable rubber handle and thumb hold provide a sure, ergonomic grip Four permanently angled mounting pins allow for both straight and angle cutting The mounting pins keep the blade secure even when tension is released.

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

SAW BLADES, HACKSAW, HACKSAW BLADES

POWERBAND BI-METAL UNIQUE SAW BLADES • For Portable Band Saw Machines DIMENSIONS (LENGTH x WIDTH x THICKNESS)

CAT. NO.

44-7/8" x 1/2" x .020” x 18

BM18

ITEM CODE

250.019.14602

HOLE SAW ARBOR ADAPTER

BI-METAL UNIQUE® HIGH SPEED STEEL SAFE-FLEX® HACKSAW BLADES • These conventional bi-metal hacksaw blades offer a sturdier construction • An excellent choice for demanding off-hand use or light power-assisted machine applications

250.019.63260

DIMENSIONS (LENGTH x WIDTH x THICKNESS)

CAT. NO.

12" x 1/2" x 025" 300mm x 13mm x 65mm

KBS1218-10

20 BLADE PACKS ITEM CODE

250.019.0008

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

209

© 2010 STEEL AND PIPES, INC.

• Fits arbors KA1, KA4 and KA11 • This handy adapter allows use of hole saws up to 6” (152mm) for light duty work.


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS SPRAY GUN-1 QT DBLE BLIST

219.019.0050 • Heavy Duty Construction • Adjustable Spray Pattern Control. • Dual Action Trigger. • Anti-drip, 1 Quart Polished Cast Aluminum Siphon Cup with Quick-Release Cover. • External Mix, Siphon Feed Gun. • Forged Air Cap and Spray Head. • Precision-Machined Brass Nozzle. • Provides a Constant, Uniform Finish Every Time. • Air Hose Connector: G1/4''. • Air Consumption: 4-7 CFM. • Fluid Nozzle Diameter: 2. • 0 MM. For Use with 2 Hp Air Compressor or Larger.

4" FLEX JAW SPRING

219.021.040 • Jaw Contoured to Hold Round and Odd • Shaped Object. • Durable Soft Pads Protect Work. • Handles Designed for Comfortable Hand • Span. • Swivel Pad for Better Grip.

TRAILER LIGHT KIT 219.019.0075

• Add or Upgrade the Light on your Utility Trailer, Snowmobile, Camper, or Boat. • High Visibility Safety Lights are Easy to Mount • Set Includes: One Pair Multi-Function Trail Lights. One Pair Side Marker Lights. License Plate Brackets. Two Wiring Harnesses.

SAFETY SCRAPER + 5 BLADES

219.019.0023 • Ideal for Open Cartons, Cuts String or Rope, Splice Wire, Prune Plants, Scrape Windows, Paint and Wallpaper. • 5 Extra Blades Included.

6" PISTOL GRIP RATCHET BAR CLAMP

4" PISTOL GRIP RATCHET BAR CLAMP

219.021.04 • Jaws can be Reversed and Used as a Spreader. • Easy to Use. • Nylon Fiber Filled Jaws. • Strong and Light Weight. • Jaw Opening: 4" • 105MM Jaw Opening. • For #22560. • 6" 150MM Jaw Opening. • For #22570. • 12" 300MM Jaw Opening. • For #22580. • 24" 600MM Jaw

© 2010 STEEL AND PIPES, INC.

219.021.06

• Jaws can be Reversed and Used as a Spreader. • Easy to Use. • Nylon Fiber Filled Jaws. • Strong and Light Weight. • Jaw Opening: 4" • 105MM Jaw Opening. • For #22560. • 6" 150MM Jaw Opening. • For #22570. • 12" 300MM Jaw Opening. • For #22580. • 24" 600MM Jaw

210

2 X 3/4 X 2-1/2" LONG TRAILER BALL 219.019.0075

TOWING ACCESSORY KIT -2"

• Drop Forged, Full Polished & Chrome Plated. • Stainless Steel Construction. • External Thread.

219.019.0070

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS 17 PC TITANIUM DRILL BIT SET 609.0105

17 PC DRILL & MASONARY BIT SET 609.0100

UTILITY KNIFE 250.019.0021

COMBINATION CUTTER SET 250.019.0020

4 IN 1 COMPOSITE HACK SAW 250.019.0012

2" LAMINATED PADLOCK

250.019.0065

50' X 3/16" WHITE POLY ROPE 250.005.0020

LOAD BINDER 5/16” - 3/8”

218.001.51650 • High Quality Heat Treated Carbon Steel. • Corrosion • Resistant Baked Enamel Finish. • Drop Forged Ball, Socket and Hooks. • Provides Easy, Secure Tightening, and Quick • release of Loads. • Max Capacity: 5400lbs. • Accepts all Chain from 5/16'' to 3/8''.

4T CABLE PULLER 2 SOLID GEARS

218.001.51470 • Hardened and Galvanized Heavy Gauge Steel. • 3 Drop Forged Safety Catch Hooks for Heavy Loads. • Trouble • Free Thumb Control Release for Maximum Safety. • Powerful Dual Solid Gear Ratcheting System is Excellent for Pulling Heavy • Duty loads. • 10,000 Lbs Pulley

218.001.51410 • Hardened and Galvanized Heavy Gauge Steel. • Trouble • Free Thumb Control Release for Maximum Safety. • Powerful Dual Ratcheting System is Excellent for Pulling Heavy • Duty Loads. • 3 Drop Forged Safety Catch Hooks for Heavy Loads. • 5,000 Lbs Pulling Cap

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

211

© 2010 STEEL AND PIPES, INC.

2 TON COMELONG-3 HOOK


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS 57 PC RATCHETING SCREWDRIVER SET 250.019.0035

6 IN 1 SCREWDRIVER

250.019.0030 • Chrome Plated Tube with 1/4" and 5/16" Nut Drivers on Opposite Sides. • High Visibility Orange and Green Handles Make Screwdrivers Easy to Locate. • For the Most Popular Slotted, Phillips and Hex Fasteners • Spring • Loaded Steel Ball Bearings Hold Bits and

4PC RATCHET TIE DOWNS 200.0004

1” X 15’ RATCHET TIE DOWN 200.0001

2"X27' NYLON BELT W/RATCHET 200.0200

2"X27' RATCHET TIE DOWN 10,000LB

© 2010 STEEL AND PIPES, INC.

200.2000

• 2" Wide Weather • Resistant Nylon webbing strap. • Trouble • Free, Push Button Quick • Release. • Durable 27' Straps will not Loosen with Road Vibration. • Ideal for Trucks, Trailers, Heavy Haulers, and any Other

212

4" X 25' SLING W/ LEATHER END

200.0425 • Strong Nylon Webbing with Loops on Both Ends. • 10,000IB Capacity. • Stretches to Snatch Vehicles from Mud, Sand or Snow.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


6" ADJUSTABLE STEEL CALIPER

250.019.0033 • Slide Lock to Hold Readings. • Thumb Roll for Easy Adjustment. • Steel Construction with Die • Stamped Increments.

TARPS ITEM CODE

DESCRIPTION

251.003.0810 251.003.1012 251.003.1216 251.003.1620 251.003.2020 251.003.2030 251.003.3040

8' x 10' PVC POLY TARP - 80 SF 10' x 12' PVC POLY TARP - 120 SF 12' x 16' PVC POLY TARP - 192 SF 16' x 20' PVC POLY TARP - 320 SF 20' x 20' PVC POLY TARP - 400 SF 20' x 30' PVC POLY TARP - 600 SF 30' x 40' PVC POLY TARP - 1200 SF

• Poly Woven Tarp Coated on Both Sides with Polyethylene Film. • Water, Mildew and Rust Resistant. • Four Plastic Reinforced Corner Bars for Extra Strength and Longer Life. • Rust Resistant Grommets Approximately Every Three Feet Along all Four Heat Welded Edg

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS

DIGITAL MULTIMETER

ITEM CODE

251.019.0036 251.019.0038 251.019.0037

DESCRIPTION

2-9/16" x 1/4 2-9/16" x 3/8 2-9/16" x 5/16

BRASS COUPLER -5 PC QUICK

TC.10040 • Precision Zinc-Cast Construction. • Easily Locks Tool onto Air Hoses. • Coupler Assures Easy Connects and Disconnects. • Universal Fit for All 1/4'' NPT Tools. • Fittings Rotate to Eliminate Twisted Hoses.

RAIN PONCHO HEAVY DUTY ONE SIZE FITS ALL

251.001.0120 • Hooded Rain Poncho with Drawstring. • Heavy Polyethylene Construction. • Convenient and Easy to Carry. • Reusable.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

213

© 2010 STEEL AND PIPES, INC.

3PC MAG NUTSETTER

250.019.0090 • Led Readout • 7 Functions, 19 Ranges • Low Battery Included • Overload Protection • 1000 Volt Max. • User Manual Included • Accurate to +/~.005%


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS RUBBER COVER TAPE 16' X 3/4" 610.T.16

100' FIBERGLASS TAPE MEASURE 610.T.76450 • Professional quality. • SAE and surveyors scale. • 100% fiberglass. • Brass anchor point. • All steel handle.

TEFLON TAPE-2PC.

250.499.015 • Tape Size: 1/2'' x 520'' x 0. • 075mm. Seals threaded Plastic or Metal Pipe and Tubing Connections. • Use on Most Water, air, or Gas Lines. • Ideal for Plumbers, Mechanics, Contractors, and Homeowners. • Two 43' x 1/2: Rolls • 86' Overall Length.

3/4"X 30' UL ELECTRIC TAPE

250.020.005 • Size: 3/4" x 60FT. • (20 YDS.) Suitable for Use at Not More Than 600V and Not More Than 80?C (176?F) • U/L Approved.

That’s why we are the company of choice!

1/2"X 260' TEFLON TAPE-20PC SB

© 2010 STEEL AND PIPES, INC.

250.499.014

214

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS

EM81.9 9" HEAVY-DUTY MAGNETIC TORPEDO LEVEL

250.019.EM81.9 • True Blue® vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions • Heavy-duty extruded aluminum frame • Vials read plumb, level and 45°. • Strong-holding magnetic edge • V-grooved working edge fits on pipe or conduit

581-9 9" MAGNETIC TORPEDO LEVEL 250.019.581-9

EM81.12 EMPIRE 12” MAGNETIC TOOL BOX LEVEL 250.019.581-12

• Durable acrylic vials read plumb, level and 45° • Solid aluminum frame, 9" overall length • Magnetic edge frees hands

580-24 24" ALUMINUM LEVEL 331-9 9" MAGNETIC TORPEDO LEVEL

POLYCAST®

250.019.331-9 • Strong, accurate 9" Polycast® frame • Non-conductive frame insulates from heat, cold and electricity • Strong holding magnetic edge • Vials read plumb, level and 45°

581-48 48" MAGNETIC ALUMINUM LEVEL 250.019.581-48

250.019.580-24

580-48 48" ALUMINUM LEVEL

250.019.580-48 • Advanced frame design assures accuracy • Top read window • Beveled endcaps protect vials from shock

EM71.24 24" MAGNETIC LEVEL

581-72 72" MAGNETIC ALUMINUM LEVEL 250.019.581-72 • Magnetic edge holds to ferrous surfaces • Advanced frame design assures accuracy • Top read window • Beveled endcaps protect vials from shock

• True Blue® vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions • Dual molded rubber endcaps for extreme shock resistance • 300° view top-reading level vial • Rare Earth magnets for super-strong hold onto ferrous surfaces • Vial Guard to protect vials • Gripping surface for assist drawing straight lines

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

215

© 2010 STEEL AND PIPES, INC.

250.019.580-24


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS Fuller®

MECHANIC SCREWDRIVER 1/4 IN. X 4 IN. RND SHANK #1-3” PHILLIPS SCREWDRIVER

255.107-0406

255.107-0422

MECHANIC SCREWDRIVER 3/8 X 8 IN. RND SHANK

#3-6” PHILLIPS SCREWDRIVER 255.107-0424 • Serrated tip for maximum gripping performance, chrome vanadium steel blade for strength and durability • One piece shatterproof handle • Extra large fluted handles for maximum comfort and torque

255.107-0410 • Serrated tip for maximum gripping performance, chrome vanadium steel blade for strength and durability • One piece shatterproof handle • Extra large fluted handles for maximum comfort and torque

PRO GROOVE JOINT PLIERS 10 255.401-0113

• Sure-gripping precision milled jaws. • Grooves undercut to prevent slipping when tightening.

SLIP JOINT PLIERS 6

255.401-0111 • A general purpose tool for gripping and bending objects. • The pivot point provides for two convenient widths of jaw opening.

GROOVE JOINT PLIERS 10”

255.401-0115 • For gripping round work, such as pipes and damaged nuts that may slip in an adjustable wrench or socket. • The different grooves provide a choice of jaws openings.

DIAGONAL CUTTING PLIER 6 255.406-1906 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.

5” CURVED LOCKING PLIER WITH WIRE CUTTER © 2010 STEEL AND PIPES, INC.

255.435-9901

7” CURVED LOCKING PLIER WITH WIRE CUTTER 255.435-9902 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.

216

10” STRAIGHT LOCKING PLIER

255.435-9904 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS Fuller®

PRO

6” LONG NOSE LOCKING PLIER WITH WIRE CUTTER 255.435-9905

6 PCS SAE COMBINATION WRENCHES SET

9” LONG NOSE LOCKING PLIER WITH WIRE CUTTER

255.426-2106

255.435-9906

• For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.

3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

PRO

PRO

LONG NOSE CUTTING PLIERS 6” 255.406-1926

LONG NOSE CUTTING PLIERS 8” 255.406-1928 • Strong sure-gripping jaws manipulate wire and other awkward objects. • Slim tapered head extends reach and mantains visibility in small areas

PRO 700 SCREWDRIVER 7 PCS SET 255.107-5070 #1, #2 #1, #2 1/8” X 3”, 3/16” X 4”, 1/4” X 4”

ADJUSTABLE WRENCHES 255.416-0006 6” 255.416-0008 8” 255.416-0010 10” 255.416-0012 12” • Designed for general purpose usage constructed of durable alloy steel

PIPE WRENCHES 255.431-0041 8” 255.431-0042 10” 255.431-0043 14” 255.431-0046 24”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

217

© 2010 STEEL AND PIPES, INC.

PRO


WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

TOOLS Fuller®

255.130-7610

9 PCS METRIC LONG ARM HEX KEY SET

255.600-4116

HARDWOOD HANDLE CLAW HAMMER 16OZ.

1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm

• Fuller brand wood handle hammers feature a natural colour hardwood handle and durable semi-polished heat-treated head

PRO 250.020.001

24” BOLT, ROD AND WIRE CUTTER • Cuts up to 3/84”

255.130-7701

8 PCS SAE FOLDING HEX KEY SET

250.020.002

36” BOLT, ROD AND WIRE CUTTER

0.005, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”

• Cuts up to 9/16”

255.130-7702

9 PCS SAE FOLDING HEX KEY SET 5/64”, 3/32”, 7/64”, 1/8”, 9/64“, 5/32” 3/16”, 7/32”, 1/4”

HIGH SPEED STEEL TWIST DRILL BITS • FULLER high speed steel drill bits are designed for drilling into steel, wood and plastics. • Their precision ground 118˚ drill tips are excellent for general purpose use.

© 2010 STEEL AND PIPES, INC.

609.0008 609.0012 609.0016 609.0020 609.0024 609.0025 609.0026 609.0028 609.0032

218

1/8” 3/16” 1/4” 5/16” 3/8” 25/64” 13/32” 7/16” 1/2”

PRO FULLER PRO MASONRY DRILL BITS • FULLER masonry drill bits are designed for use in dry concrete, brick and tile. 255.805-3012 255.805-3014 255.805-3020 255.805-3022 255.805-3031

3/16” X 3-1/3“ 1/4” X 6” 1/2” X 6” 5/8 X 6” 5/32 X 5-1/2”

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SEM RUBBERIZED UNDERCOATING SPRAY

Z-GRIP BODY FILLER ITEM CODE

205.100282 205.100280

DESCRIPTION

Z-GRIP BODY FILLER/GALLON Z-GRIP BODY FILLER/QUARTS

205.39523

• A paintable, fast-drying, multi-purpose coating for rust proofing, sounddeadening, chip resistance and corrosion protection.

• An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7™ for superior adhesion to galvanized steel, bare steel and aluminum.

SPREADERS 4"

205.GL1204 • 4 inch plastic speaders used for applying filler on body panels. Also useful for applying or smoothing out POR Patch for sealing seams etc...

DURA BUILD PRIMER GRAY ITEM CODE

205.102274 205.102273

WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION

BODYWORK PRODUCTS

DESCRIPTION

DURA BUILD PRIMER GRAY/GAL. DURA BUILD PRIMER GRAY/QTS.

• An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7™ for superior adhesion to galvanized steel, bare steel and aluminum.

3M SAND PAPER 9"X11" ITEM CODE

DESCRIPTION

205.100400 205.220400 205.320400 205.400400 205.500400 205.600400

3M SAND PAPER 9"X11" #100 3M SAND PAPER 9"X11" #220 3M SAND PAPER 9"X11" #320 3M SAND PAPER 9"X11" #400 3M SAND PAPER 9"X11" #500 3M SAND PAPER 9"X11" #600

FIBERGLASS REPAIR KIT QUART

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

219

© 2010 STEEL AND PIPES, INC.

205.BDK-14

• Fast and easy permanent repairs of fiberglass, most woods and metals. Strengthens, repairs and rebuilds. Repair cracks and holes in fiberglass and wood. Kit may be used for small lay-up jobs or fabricating missing fiberglass panels. Includes: 8 fluid ounces of fiberglass resin, .25 fluid ounce of liquid hardener, 3 square feet fiberglass cloth, spreader sticks and instructions.


We are your Industrial Supermarket


SAFETY EQUIPMENT DIVISION

KincoPro ™


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS KincoPro ™

KincoPro ™ 2011-UNLINED DRIVER

219.12.2011-M 219.12.2011-L 219.12.2011-XL • MiraX2™ black color synthetic leather palm • Form fitting spandex fabric back • Rubber hook and loop pull strap for wrist closure • Terry cloth sweat wipe on thumb • Machine washable

102HK-KINCOPRO™ LINED GRAIN GOATSKIN 219.12.102-M 219.12.102-L 219.12.102-XL

• Grain goatskin leather palm and fingertips • XtremeGRIP!® reinforcing and grip material palm and fingertips • Heatkeep® full sock thermal lining • AIRFLOW™ knuckle and wrist material for added protection • Rubber hook and loop pull strap for wrist closure

KincoPro ™ 908-UNLINED GRAIN PIGSKIN, MESH BACK 219.12.908-M 219.12.908-L 219.12.908-XL • Green nylon mesh back for those hot summer days • 3M™ Scotchlite™ reflective material • Keystone thumb

KincoPro ™ 909-UNLINED GRAIN PIGSKIN, MESH BACK 219.12.909-M 219.12.909-L 219.12.909-XL • Orange nylon mesh back for hot summer days • 3M Scotchlite™ Reflective Material • Keystone thumb

KincoPro ™

© 2010 STEEL AND PIPES, INC.

1600-PREMIUM COWHIDE DOUBLE PALM

219.12.1600.2L • Double palm green leather • Draylon® thread on palm patch for extra abrasion • Rubberized cuff • Wing thumb

222

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


KincoPro ™

The Sabres

BLUE SABRE® PREMIUM COWHIDE

• Premium grade split cowhide leather • Sewn with Kevlar® thread • Gauntlet area lined with flame retardant material • Soft fleece cotton sock lining on palm and back • Fully welted seams for total protection • Wing thumb

219.12.00035

Special Feature of the BLUE SABRE®... Reinforced Thumbstrap!

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

KincoPro ™ BLACK SABRE® PREMIUM COWHIDE 219.12.00044

KincoPro ™ RED SABRE® PREMIUM COWHIDE 219.12.00045

KincoPro ™ 0422- ECONOMY COWHIDE 219.12.422.L • Russet split cowhide • Wing thumb • Fully welted seams

KincoPro ™ RAZORBACK® PREMIUM PIGSKIN

219.12.200258 • Premium golden split pigskin • Sewn with Kevlar® thread • Wing thumb design for extra dexterity • Fully welted seams

KincoPro ™ 2045-UNLINED SAFETY REFLECTOR™

KincoPro ™ 98-WOMEN’S LINED GRAIN COWHIDE

219.12.98-M 219.12.98-L 219.12.98-XL • Grain cowhide • Jersey/foam thermal lining • Shirred elastic back

• MiraX2™ gray color synthetic leather with XtremeGRIP!®reinforcing palm material. • Kevlar® thread material to reinforce thumb. • 3M™ Scotchlite™ reflective material on wrist and knuckle strap. • High visibility green color form fitting spandex material on back. • Rubber hook and loop pull strap for wrist closure.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

223

© 2010 STEEL AND PIPES, INC.

219.12.2054-L


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENT KincoPro ™

50RL-LINED DRIVERS SUEDE COWHIDE

219.12.50RL.L • Suede cowhide • Black fleece thermal lining • Keystone thumb

KincoPro ™

51PL-LINED DRIVERS SUEDE COWHIDE

219.12.51PL.L • Suede cowhide • Thermal pile lining • Keystone thumb

KincoPro ™ 2031-UNLINED PRO CARPENTER™ 219.12.2031.L

• 3-cut finger design. • MiraX2™ gray color synthetic leather with XtremeGRIP!® reinforcing palm material. • Kevlar® thread material to reinforce thumb. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb

KincoPro ™ 2035-UNLINED PRO FOREMAN™

219.12.2035.L • Double layer of MiraX2™ tan and brown color synthetic leather palm. • MiraX2™ on back with rubber knuckle protectors. • Form fitting spandex fabric back. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb.

KincoPro ™

© 2010 STEEL AND PIPES, INC.

2041-UNLINED PRO GENERAL™

219.12.2041.L • MiraX2™ gray color synthetic leather with XtremeGRIP!® reinforcing palm material. • Kevlar® thread material to reinforce thumb. • Form fitting spandex fabric back. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb.

224

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SAFETY EQUIPMENT DIVISION

WELDING JACKETS

JACKET 30" WELDING JACKET “YELLOW JACKET”

WELDING LEATHER JACKET

• The Golden Brown leather clothing line is made using heat and abrasion resistant select split cowhide. Garments are sewn with Kevlar thread for added seam durability and riveted stress points to increase the life of the product.

219.12.00078 219.12.00080 219.12.00082 219.12.00084 219.12.00086

DESCRIPTION

WELDING LEATHER JACKET MEDIUM WELDING LEATHER JACKET LARGE WELDING LEATHER JACKET XL WELDING LEATHER JACKET XXL WELDING LEATHER JACKET XXXL

PRODUCT NUMBER

219.12.00070 219.12.00071 219.12.00072 219.12.00073 219.12.00074 219.12.00075

DESCRIPTION

WELDING JACKET YELLOW BLUE SMALL WELDING JACKET YELLOW BLUE MEDIUM WELDING JACKET YELLOW BLUE LARGE WELDING JACKET YELLOW BLUE X-LARGE WELDING JACKET YELLOW BLUE XX-LARGE WELDING JACKET YELLOW BLUE XXX-LARGE

30" FLAME RETARDANT COTTON JACKET PRODUCT NUMBER

219.12.00060 219.12.00062 219.12.00064 219.12.00066 219.12.00068 219.12.00070

DESCRIPTION

WELDING JACKET GREEN MEDIUM WELDING JACKET GREEN LARGE WELDING JACKET GREEN XL WELDING JACKET GREEN XXL WELDING JACKET GREEN XXXL WELDING JACKET YELLOW BLUE SMALL

WELDING COTTON JACKET-ORANGE DRAGON SHIELD PRODUCT NUMBER

219.12.00090 219.12.00091 219.12.00092

DESCRIPTION

WELDING JACKET ORANGE DRAGON SHIELD LARGE WELDING JACKET ORANGE DRAGON SHIELD XLARGE WELDING JACKET ORANGE DRAGON SHIELD X X-LARGE

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

225

© 2010 STEEL AND PIPES, INC.

PRODUCT NUMBER

• Superior flame, heat and abrasion resistant, select cowhide leather sleeves for heavy duty protection. • 30" length jacket made of blue 9 oz. Proban FR7A flame retardant cotton sateen for safety and cool comfort. • 5 snap closure front, minimizes hot shooting spatter from entering. • Inside utility pocket for safety and convenience. • All leather seams double stiched with Dupont Kevlar® thread for added durability.


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS HIGH VISIBILITY

ANSI / ISEA 107

TRAFFIC SAFETY

COMPLIANT TRAFFIC VESTS Vests meet or exceed the ANSI/ISEA 107-2004 High Visibility Standard, provides your worker 360° visibility. Features: two color choices (hi-viz orange or yellow/green), 100% polyester fabric, North-Brite™ retroreflective tape*, zipper closure, and same color fabric binding. (Sizes L-3XL) CLASS 2 • 1.5" North-Brite retro-reflective stripes, 2 vertical stripes on front and back, 1 horizontal stripe on waist. TVA2/15NZ/O: ORANGE TVA2/15NZ/L: YELLOW/GREEN

TVA2/15NZ/L

• 2" North-Brite retro-reflective stripes, 2 vertical stripes on front and back, 2 horizontal stripes on waist. TVA3/2NZ/O: ORANGE TVA3/2NZ/L: YELLOW/GREEN

NORTH-BRITE™ REFLECTIVE VESTS

• Hi-Viz, 100% polyester mesh, 2" North-Brite retro-reflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure,black binding trim. (one size) TV55RS/1S: 1" TAPE, ORANGE TV55RS/1SLY: 1" TAPE, YELLOW/GREEN TV55RS/1.5S: 1.5" TAPE, ORANGE TV55RS/2S: 2" TAPE, ORANGE TV50RSTA: 2" TAPE, ORANGE, “TEAR AWAY” HOOK & LOOP ON SHOULDER AND SIDES FOR QUICK RELEASE (ALSO AVAILABLE IN XL)

TV15RSC

ECONOMICAL MESH TRAFFIC VESTS

• Hi-Viz orange mesh, 100% polyester, elastic sides, 3" front closure, black binding trim. TV50: REGULAR TV50XL: X-LARGE

TV55RS/1S

• Hi-Viz orange or yellow/green fine mesh vest, 100% polyester, 1" silver retro-reflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure. (one size) TV15RSC: ORANGE TV15RSC/LY: YELLOW/GREEN

© 2010 STEEL AND PIPES, INC.

• Hi-Viz orange mesh traffic vest, 100% polyester, 2" yellow/green retroreflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure, black binding trim. TV30RS: (ONE SIZE)

TV50

226

*North-Brite is a prismatic vinyl tape offering greater reflectivity with its omni-angular reflective properties. Omni-angular means that light is reflected back to the viewer from a greater angle than the straight-on properties offered by other tapes on the market. The unique design of the North-Brite prisms reflect light from more angles for the safety of workers who are constantly moving; the worker’s safety is enhanced with North-Brite.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


FOCUS PRODUCTS

NORTH BULK FIRST AID KITS Kits contain economic bulk supplies that can be readily accessed when needed. They are ideal for manufacturing settings where a wide variety of first aid items are required. All kits are weatherproof and are available in plastic or metal. All North bulk kits are ANSIZ 308.1-2003 compliant.

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

METAL BULK FIRST AID KITS PART #

METAL BULK FIRST AID KITS

DESCRIPTION

019701-0001L 019703-0002L 019705-0003L 019707-0004L

10 PERSON BULK FIRST AID KIT 25 PERSON BULK FIRST AID KIT 50 PERSON BULK FIRST AID KIT 75 PERSON BULK FIRST AID KIT

PLASTIC BULK FIRST AID KITS PART #

DESCRIPTION

0197 00-0001L 0197 02-0002L 0197 04-0003L 0197 06-0004L

10 PERSON BULK FIRST AID KIT 25 PERSON BULK FIRST AID KIT 50 PERSON BULK FIRST AID KIT 75 PERSON BULK FIRST AID KIT

REFILL#

032072T 020855 020020 020915 020445 021645M 045028 045029 121090 041960 126040 031400 020135 045027 031570 020667 020555 752577 020126 041975D 032016D 021202P 029990 154850 045009

DESCRIPTION

10 PERSON

ADHESIVE BANDAGE, 1" X 3", PLASTIC ADHESIVE BANDAGE, FINGERTIP, CLOTH ADHESIVE BANDAGE, KNUCKLE, CLOTH ADHESIVE BANDAGE, EXTRA LARGE, PLASTIC ADHESIVE TAPE, 1⁄2" X 21⁄2 YARD ANTISEPTIC WIPES, BZK CONFORMING BANDAGE, 2"X 6 YARD, NON–STERILE CONFORMING BANDAGE, 3"X 6 YARD, NON–STERILE CPR FILTERSHIELD™ ELASTIC BANDAGE, 2" EYE–LERT®, 1 OZ. EYEWASH EYE PAD, STERILE FIRST AID/BURN CREAM WITH ALOE FIRST AID GUIDE FORCEPS, POINTED, PLASTIC INSTANT COLD PAK PAIN–A–REST®, NON–ASPIRIN SCISSORS, ANGLED, RED HANDLE ANTIBIOTIC OINTMENT POUCH STERILE GAUZE PADS, 2" X 2" STERILE GAUZE PADS, 3" X 3" STING RELIEF WIPES MEDICAL GLOVES, SYNTHETIC, (PAIR) TRAUMA PAD, 5" X 9", STERILE TRIANGULAR BANDAGE, NON–STERILE

25 PERSON

50 PERSON

75 PERSON

32 3 2 1 2 6 2 1 1 – 1 1 6 1 1 1 – 1 6 4 1 6 4 1 1

100 4 3 2 2 12 3 2 1 1 1 2 12 1 1 2 – 1 12 10 2 12 4 1 1

100 8 6 3 3 12 4 2 1 1 2 3 12 1 1 2 – 1 12 10 10 12 10 1 1

16 1 – 1 2 6 1 1 – – – – 6 1 1 1 3 1 6 4 1 6 4 1 1

* CPR MICROSHIELD® IS A REGISTERED TRADEMARK OF MEDICAL DEVICES INTERNATIONAL.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

227

© 2010 STEEL AND PIPES, INC.

PLASTIC BULK FIRST AID KITS


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS COMFORT MASK PART #

DESCRIPTION

PACKAGING

COMFORT MASKS RP1500 50 PER PACKAGE • Disposable Comfort Mask for protection against non-toxic dusts. Not NIOSH approved.

N95 RESPIRATORS PARTICULATE 95% MINIMUM FILTER EFFICIENCY PART #

DESCRIPTION

PACKAGING

N95 PARTICULATE RESPIRATOR 30 PER PACKAGE 6130N95 • This respirator provides protection from dust, mists and fumes at an economical price. The mask features a foam nose pad, nose clip for a better fit and latex free straps. Use in dusty environments that are free from oil based aerosols.

PART #

DESCRIPTION

7130N95 7130N95S

N95 PARTICULATE RESPIRATOR 20 PER PACKAGE N95 PARTICULATE RESPIRATOR(SMALL) 20 PER PACKAGE

PACKAGING

• North has designed and engineered this respirator to provide exceptional comfort and worker protection. It features a soft cushioned nose seal for added comfort and a curved nose clip for improved fit. The headstraps are latex free. The 7130N95 provides protection from solids and particulate aerosols free of oil, and is ideal for dusty environments such as grinding, sanding and sweeping. PART #

DESCRIPTION

PACKAGING

7140N95

N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE

10 PER PACKAGE

7140N95S

N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE(SMALL)

10 PER PACKAGE

• This respirator has the same features as the 7130N95, with the added benefit of a built in exhalation valve for cooler and easier breathing. The 7140N95 provides protection from solids and particulate aerosols of oil.

P95 PARTICULATE RESPIRATORS PART #

DESCRIPTION

95% TO 99.97% MINIMUM FILTER EFFICIENCY PACKAGING

7140N95 N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE 10 PER PACKAGE • Comfortable and durable, the 8140P95 features a foam-cushioned facepiece seal that conforms closely to the face for long lasting comfort and and protection, latex free, straps and a built-in exhalation valve for cooler and easier breathing. The 8140P95 provides protection from all particulates, and is ideal for machining and other dusty and oily operations. 95% minimum filter efficiency.

PI00 PARTICULATE RESPIRATORS © 2010 STEEL AND PIPES, INC.

PART #

DESCRIPTION

PACKAGING

P100 PARTICULATE RESPIRATOR WITH EXHALATION 5 PER PACKAGE VALVE, ADJUSTABLE STRAPS • The 8150PlOO provides PlOO protection without sacrificing comfort. A soft foam cushioned facepiece seal provides superior comfort and fit. Other features include a built-in exhalation valve and adjustable latex free straps The 8150PlOO filtering facepiece provides protection from all particulates, including those that contain oil based aerosols. 99.97% minimum filter efficiency. 8150P100

228

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


PVC PLUGS

FEATURES/BENEFITS

DECI DAMP 2™

NRR •Uncorded 29 dB •Corded 29 dB

• Expands to fit ear canal Maximizes wearer protection.

• Foam Construction One size fits most. Lightweight, soft and comfortable. Non-toxicand non-irritating,disposable.

• Sealed Pouches

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

Available in cellophane and degradable paper. Maximum cleanliness, assures employees that plugs are unused.

• Available with Cord

minimum s available.

More convenient to use, visible or safety checks

280006

282505

PART #

DESCRIPTION

PACKAGING

UNCORDED 280005 280005BP* 280019 282505

1 PAIR PER CELLOPHANE POUCH BULK PACK 5 PAIRS PER ZIP-LOCK BAG 1 PAIR PER DEGRADABLE PAPER POUCH

200 PAIRS/CARTON 500 PAIRS/CARTON 50 BAGS/CARTON 200 PAIRS/CARTON

CORDED 280006 280035

1 PAIR PER PLASTIC POUCH 1 PAIR PER DEGRADABLE PAPER POUCH

100 PAIRS/CARTON 100 PAIRS/CARTON

*Available in the U.S. Only

DECI 4200™

NRR •Uncorded 33dB •Corded 33dB

FEATURES/BENEFITS • Soft Polyurethane Foam

Expands to fit ear canal. Maximizes noise protection. Non-toxic and non-irritating, comfortable, flexible, easy to wear.

• Sealed Pouches Available in cellophane and degradable paper in uncorded only Minimizes contamination.

284240CO

• Available with Cord Visible for safety checks, reduces incidence of lost plugs

284200UO

DESCRIPTION

PACKAGING

1 PAIR PER CELLOPHANE POUCH BULK PACK 5 PAIRS PER ZIP-LOCK BAG 1 PAIR PER DEGRADABLE PAPER POUCH

200 PAIRS/CARTON 500 PAIRS/CARTON 50 BAGS/CARTON 200 PAIRS/CARTON

CORDED 280006 280035

1 PAIR PER PLASTIC POUCH 1 PAIR PER DEGRADABLE PAPER POUCH

100 PAIRS/CARTON 100 PAIRS/CARTON

*Available in the U.S. Only

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

229

© 2010 STEEL AND PIPES, INC.

PART #

UNCORDED 280005 280005BP* 280019 282505


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS MOSQUITO LIGHT DUTY PROTECTION

MUSTANG

Created for people who need good protection when exposed to intermittent harmful noises.

EM4155

EM4157

FEATURES

• No snag band - low profile for model EM4155 • Unique tension adjustability of EM4157 arms • Unique cup design • Good attenuation • Durable • Maximum comfort NRR NRR • Soft sealing cushions • EM4155 23dB • EM4157 20dB • Lightweight • Dielectric PART#

COLOR

HEAD BAND EARMUFF EM4155 BLUE

WEIGHT

BLUE

FEATURES/BENEFITS

• Ultra light • Good performance • Cups are made of styrene • Comfortable head band • Dielectric PART#

209G./7.4OZ.

CAP MOUNTED EARMUFF EM4157

EM3144

COLOR

HEAD BAND EARMUFF EM3144 BLACK

NRR 21dB

WEIGHT

148G./5.3OZ.

284G./9.3OZ.

REMEMBER!

We Can Repair And Fix Your Welding Machine Or Plasma Cutting Machines

© 2010 STEEL AND PIPES, INC.

• Repair • Parts • Service

230

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


MASK BP1002 SHOWN WITH 7700 SERIES HALF MASK AND 7581P100 CARTRIDGES

BP 1002 BACKPACK ADAPTER PART #

BP1002

DESCRIPTION

PACKAGING

BACKPACK ADAPTER*

1 PER PACKAGE

•The backpack adapter allows users to locate cartridges and filters out of the work zone, by placing them on the user's back. The BPlO02 is easily adaptable to all North Full Facepiece and Half Mask air-purifying respirators, simply by attaching it to the facepiece cartridge connectors. It is ideal for tight or highly heated work places such as those encountered in welding operations. Think of it as an extension cord for your cartridges.

7190N99 PARTICULATE RESPIRATOR

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

7190N99 PARTICULATE RESPIRATOR PART #

7190N99 719009N99

DESCRIPTION

N99 RESPIRATOR PARTICULATE REPLACEMENT FILTERS FOR 7190N99

PACKAGING

1 PER PACKAGE 2 PER PACKAGE

• For solids, such as welding fumes and non-oil particulates (99 % minimum filter efficiency). Fits easily under welding hoods. Replacement filters available.

*NOTE: Facepiece and Cartridges sold separately

FULL FACE PIECE WELDING RESPIRATORS 7600 SERIES FULL FACEPIECE PART #

Complete 760008AW Respirator

760008AW FULL FACEPIECE SHOWN WITH 7580P100 FILTERS

Attachment

DESCRIPTION

PACKAGING

7600 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (MEDIUM / LARGE)

1 PER PACKAGE

760008ASW 7600 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (SMALL)

1 PER PACKAGE

8404

WELDING ATTACHMENT ASSEMBLY FOR 7600 SERIES FULL FACEPIECE

1 PER PACKAGE

5400 SERIES FULL FACEPIECE

Attachment 54001 W FULL FACEPIECE SHOWN WITH 7580P100 FILTERS

DESCRIPTION

PACKAGING

5400 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (MEDIUM / LARGE)

1 PER PACKAGE

54001SW

5400 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (SMALL)

1 PER PACKAGE

8405

WELDING ATTACHMENT ASSEMBLY FOR 5400 SERIES FULL FACEPIECE

1 PER PACKAGE

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

231

© 2010 STEEL AND PIPES, INC.

PART #

Complete 54001W Respirator


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS GAS & VAPOR CARTRIDGES North offers an extensive line of gas and vapor cartridges and particulate filters to satisfy numerous industrial applications. All North cartridges and filters are approved with all North air-purifying half masks and full facepiece respirators. One line of cartridges and filters will simplify your inventory. Air-Purifying Respirators with cartridges provide respiratory protection against gases and vapors by using sorbents to purify the inhaled air. Cartridges without fllters do not remove dusts, fibers, and other particles. End of service life for gas and vapor cartridges is determined by either: • an end-of-service life indicator (ESLI) certified by NIOSH, or • the employer must implement a change schedule to ensure cartridges are changed before the end of their service life esLife: North has developed the esLife software program to help users develop cartridge change schedules for North gas and vapor cartridges. esLife is part of North's on-line ezGuide™ designed to aid users in determining the appropriate respiratory and hand protection product for their specific applications.

GAS & VAPOR CARTRIDGES AND COMBINATION GAS AND VAPOR CARTRIDGES WITH P100 PARTICULATE FILTERS PART#

75SC

75SCP100 N75001 7581P100 N75002 7582P100 N75004 7583P100

© 2010 STEEL AND PIPES, INC.

N75004

OLIVE

OLIVE/MAGENTA BLACK BLACK/MAGENTA WHITE WHITE/MAGENTA YELLOW YELLOW/MAGENTA GREEN

PACKAGING

DEFENDER'M MULTI-PURPOSE CARTRIDGE FOR ORGANIC VAPORS, CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN SULFIDE (ESCAPE), HYDROGEN FLUORIDE, CHLORINE DIOXIDE, AMMONIA, METHYLAMINE AND FORMALDEHYDE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) ORGANIC VAPOR CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN FIUORIDE, CHLORINE DIOXIDE, FORMALDEHYDE CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) ORGANIC VAPOR, (CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN FIUORIDE, CHLORINE DIOXIDE CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) AMMONIA, METHYLAMINE CARTRIDGE

7584P100

GREEN/MAGENTA

ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY)

N750052

OLIVE

MERCURY VAPOR, CHLORINE CARTRIDGE WITH END-OF SERVICE-LIFE INDICATOR (ESLI FOR MERCURY VAPOR)

OLIVE/MAGENTA

ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY)

75852P100

232

DESCRIPTION

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


AVAILABLE IN MULTIPLE PANELS

CLASSIC ROUND TUBE FRAME

Single Panel

Triple Panel

Double Panel

Quadruple Panel

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

PRODUCT INFORMATION Translucent Vinyl - This material is transluscent to provide passerby observability while offering protection from harmful rays and stray sparks. Three weights are available in various colors to suit your customers' needs. Vinyls are flame resistant and meet the requirements of CPAI-84 and California Fire Marshall CFM Registration No. F-209.

Vinyl Coated Polyester - This material is opaque for maximum eye protection. In addition, coated vinyls are more resistant against puncture and abrasion.

Canvas Duck - This material is opaque for maximum eye protection. Revco's 12 oz. duck is specially treated to meet flame-retardant requirements. Frame - Our frames are made of heavy gauge black powder coated piping. The eye-screw assembly design for the round frame and the snap-fit design of the QuickFrame requires no tools.

Custom Orders - Please call for a quotation on bulk custom orders. Roll Good - Materials are also available in rolls. Please call for a quotation.

ACCESSORY ITEM NUMBERS for Round Frame and QuickFrame ITEM NO.

DESCRIPTION

CS-S CS-D CS-T CS-Q GR HK TIE

CASTER ASSEMBLY SET FOR A SINGLE PANEL FRAME CASTER ASSEMBLY SET FOR A DOUBLE PANEL FRAME CASTER ASSEMBLY SET FOR A TRIPLE PANEL FRAME CASTER ASSEMBLY SET FOR A QUADRUPLE PANEL FRAME GROMMET CURTAIN HOOK(FITS PIPES UP TO 3/4”O.D.) PLASTIC TIE

14 MIL TRANSLUCENT VINYL ORA

YEL

BLU

GRN

Tough Sturdy Brass Grommets Plastic Ties

SH8 Curtain Hook

Casters for Mobility

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

233

© 2010 STEEL AND PIPES, INC.

QUICK FRAME


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS FOCUS PRODUCTS

N-VISION 5600™ SERIES

A totally new design with a sporty look, one-piece lens, 4A coating*, adjustable temples.Regular curved and straight end temples included. Available with universal comfort bridgeor Flexi-Fit 3-point non-slip nose piece. LENS

Clear Smoke Amber 477RL Clear Smoke 485RL

BLACK/GRAY FRAME

BLUE/GRAY FRAME

GRAY/BLACK FRAME

T56505B T56505BL T56505GRY T56505S T56505GRYS T56505BA T56505GRYA Replacement lens for N-Vision 5600 safety glasses with comfort bridge, clear T56555B T56555BL T56555GRY T56555BS T56555BLS T56555GRYS Replacement lens for N-Vision 5600 safety glasses with Flexi-Fit nose piece, clear

LIGHTNING™ SERIES

High base panoramic lens with Flexi-Fit 3-point non-slip nose piece and hugging flexible temples with soft ends. Rapid change lens replacement system, 4A coating*. PART #

T6500 T65005

DESCRIPTION

Black frame, clear lens Black frame, smoke lens

LIGHTNING PLUS™ SERIES

Panoramic lens for a wide unobstructed field of view, unique bowed temples, with Flexi-Fit soft nose piece. Comes in four exciting frame colors (Blue/Black frame not listed), 4A coating*. LENS

Clear Smoke

BLACK/BLUE FRAME

SILVER/BLACK FRAME

BRONZE/BLACK FRAME

T65505S T65505SS

T65505BR

T65505B T65505BS

TORNADO™ SERIES

One piece lens that gives the impression of a dual lens, with lens pivoting system, straight adjustable or curved temple available and 4A coating* LENS

BLACK/GRAY FRAME

BLUE/GRAY FRAME

GRAY/BLACK FRAME

Clear T57005B T57005BL T57005GRY Smoke T57005BS T57005BLS T57005GRYS T57005GRYA Amber T57005BA Mirror T57005BM T57005BLM T57005GRYM T58005B Black & gray frame, clear lens without lens pivoting system, straight adjustable temple and 4A coating.

© 2010 STEEL AND PIPES, INC.

SQUIRE™ SERIES

Frameless, one piece lens styling, curved adjustable temples. 3A coating** PART

T16055 T16055S

234

#DESCRIPTION

Black frame, clear lens Black frame, smoke lens

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


CP5002

CP5004

CP5007 CP5007SP

CP5005

CARRIERS HARD HAT SERIES CP5002 CP5004 CP5005 CP5006 CP5007 CP5007SP The Peak Short Peak The K2 Everest Summit Matterhorn

SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS

CP5002, CP5004: Aluminum carriers “High Heat Resistant“ CP5005, CP5006: Plastic carriers made from Nylon CP5007, CP5007SP: Plastic carriers “Heat Resistant“

CP5006 FS01

VISORS PART#

FS03

DESCRIPTION

FS01 FS03

A8151

7” X 15 1/2” BLACK METAL SCREEN 7” X 15 1/2” BLACK METAL SCREEN WITH INTEGRATED ADAPTERS FV01 SUN VISOR FOR FS03 A8151 6” X 15 1/2” SPECIAL CLEAR FLAT DIE-CUT POLYCARBONATE .400MM VISOR WITH NOSE-CUT A8150/40 8” X 15 1/2” CLEAR FLAT DIE-CUT PET-G COPOLYESTER .40MM VISOR

FV01

EARMUFF REPLACEMENT PARTS PART#

A8150/40

HK50 HK100 HK200 HK250 HK300 HK400 HK500

PN1B0

NECK PROTECTOR PART#

DESCRIPTION

PNIB/0 NECK PROTECTOR, PVC/NYLON (ORANGE) PNIC/0 NECK PROTECTOR, FIRE RETARDANT (ORANGE) PNIE/0 NECK PROTECTOR, NOMEX® (ORANGE)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

235

© 2010 STEEL AND PIPES, INC.

EARMUFF REPLACEMENT PARTS

DESCRIPTION

NORTH HYGIENE KIT FOR MODELS: EM3144/EM6298 NORTH HYGIENE KIT FOR MODELS: EM4155/EM4157 EM4231/EM4232/EM4236 NORTH HYGIENE KIT FOR MODELS: EM1117/EM1281 EM1282/EM1286/EM2177/EM2262 / EM2266 NORTH HYGIENE KIT FOR MODEL: EM2175 NORTH HYGIENE KIT FOR MODEL: EM1115 NORTH HYGIENE KIT FOR MODELS: EM7197/EM7202 EM7206/EM7209 NORTH HYGIENE KIT FOR MODEL: EM7195


SAFETY EQUIPMENT DIVISION

SAFETY EQUIPMENTS Head, Face & Eye Protection

Most of Fibre-Metal’s welding helmets, faceshields, protective masks and welding goggles can be combined with protective headwear by utilizing any one of our three combination systems to provide the exact degree of protection and comfort required.

PROTECTIVE CAP/WELDING HELMET COMBINATIONS

5000 ADJUSTABLE SPEEDY® MOUNTING LOOP SYSTEM

• For frequent on/off use with protective caps. Welding helmets, faceshields, goggles, etc. may be mounted while the cap is on the head. No tools or modified caps required. (Does not affect ANSI rating.)

MODEL 4906

MODEL 5906

MODEL 6906

PROTECTIVE CAP/FACESHIELDS COMBINATIONS

4000 QUICK-LOK® SYSTEM

• For secure, long-term combination use. (4002) QUICK-LOK® mounting blocks are screwed onto the protective cap. Welding helmets, faceshields, goggles, etc. are equipped with (4001) QUICK-LOK® cups which can be securely mounted onto and removed from the cap - without tools.

6000 SLOTTED BLADE SYSTEM

• For use with most popular brands of slotted caps. Fibre-Metal protective wear that is equipped with our (4001) QUICK-LOK® mounting cups, can be mounted on slotted caps by simply adding our 6000 Slotted Cap Blades.

MODELF4400

MODELF6400

MODELF5400

PROTECTIVE CAP/WELDING GOGGLE COMBINATIONS

F4055

F6055

F5055

PEAK MOUNTED FACESHIELDS BRACKETS FOR USE WITH PROTECTIVE CAPS

CAP PEAK MOUNTED FACESHIELDS

© 2010 STEEL AND PIPES, INC.

• FM70 fully dielectric-mounting bracket provides a positive seal to keep debris from filtering between cap and shield. The shield may be pivoted above the cap between uses without removing the cap. Designed to fit on the front peak of our E2 and P2 caps. FM71 mounting bracket offers the same features as the FM70, but is designed for our full brim protective hats (E1 series). FH66 aluminum mounting bracket offers the same design and features as the FM70, but manufactured from extruded aluminum. Lightweight dual-channel bracket is designed to fit on the front peak of our E2 and P2 caps.

HIGH PERFORMANCE PROTECTIVE MASK • Radiant or blasts of heat are reduced without loss of

P2WCap FH66 Bracket 4199CL Window

E2RW Cap FM70 Bracket 4178TVGY Window

HIGH PERFORMANCE PROTECTIVE MASK 5621 Mask P2RW Fiberglass Hard Hat

ventilation or vision by stainless steel screen. Screen mounts to a lightweight fiberglass shell at eight points. Also available with .060 acetate window (622CL).

236

E1RW Fullbrim Hat FM71 Bracket 4178CLWindow

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SAFETY EQUIPMENT DIVISION

• For solids, such as welding fumes and non-oil particulates (99 % minimum filter efficiency). Fits easily under welding hoods. Replacement filters available.

SAFETY EQUIPMENTS

EXTENDED OR SHORT TERM PROTECTION TOP QUALITY PROTECTION FOR VIRTUALLY EVERY JOBSITE FACE HAZARD

Made from NORYL, the same material used in our welding helmets, HIGH PERFORMANCE faceshields are stronger, more durable and more heat resistant than ordinary faceshields. They contain our exclusive Channel Grip System, which mounts windows and locks them in place in a deep recessed channel to form a perfect seal from dust, dirt and debris. F300: Exceptionally lightweight and comfortable. Fits easily over today’s spectacles with space for air circulation to prevent fogging. Accommodates a full selection of standard size (8” x 111/2") windows. F400: Deeper 4” crown protector extends protection without increasing weight. Incorporates wide-vision (8" x 17") wraparound windows and screens which provide 40% more protective area than standard size faceshields. Fits easily over required spectacles or respirators. Available with choice of 3-C Headgear or three protective cap mounting mechanisms. F500: Broader, deeper 7" crown protector and wide wraparound window provides an extra margin of protection when harsh working conditions require it. Available with choice of 3-C Headgear or three protective cap mounting mechanisms.

MODEL F500

MODEL F400

MODEL F300

HIGH PERFORMANCE faceshields as designated are SEI certified to comply with current ANSI standards. SEI certification is your assurance of consistent quality and performance.

FACESHIELD WINDOWS STANDARD SIZE

WIDE VISION

4118

4178

NEW! Available in Clear and Dark Green Fits F300 Series

EXTENDED VIEW

4178IR/UV3 4178IR/UV5 4178IR/UV8

Also available in S178 Steel Screen, Dark Green and True Color Gray Fits F400, F500 Series, FH66, FM70 and F71 series

4199 S199 Steel Screen Also available in 4199 IR/UV3 NEW, IR/UV5, and Dark Green Fits F400 and F500 Series, and FH66.

Fibre-Metal faceshield windows are injection molded from propionate, which is superior to other window materials in every significant performance characteristic. They are preformed at the factory to the exact curve of our crown protectors for easy installation, an exact fit and a perfect seal against dust, dirt and debris. All HIGH PERFORMANCE windows are .060” thick for an extra margin of protection, yet they cost no more than ordinary .040” thick windows. Available in three sizes, in clear, special tints, shades 3, 5 and 8(4178 only). HIGH PERFORMANCE windows provide a degree of protection and a price point for every application and budget.

COMFORT ENHANCING SWEAT BANDS

FM-44T

FM-67

FM-66

FM-68

FM-20

Your choice of soft terry cloth (FM44T); shearing wool (FM66); soft-grain leather (FM67); soft, absorbent cotton (FM68), or air cushioned with velcro closure (FM20). Circulating air evaporates sweatband moisture for cooling effect.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

237

© 2010 STEEL AND PIPES, INC.

MODEL F500 W/ 4199GD


SAFETY EQUIPMENT DIVISION

WELDING PROTECTION

INSPECTORS’ HANDSHIELDS

Folding shields offer convenience and protection for inspectors, engineers, foremen and others who observe arc welding for short periods of time. Formed from quality leather. Folds to fit in pocket.

MODEL 870

PART #

MODEL 465 MODEL 465

PART #

MODEL 475

PART #

DESCRIPTION

2" X 4 1/4" STATIONARY GLASSHOLDER, SHIELD FOLDS TO 3½" x 6¼"

AUTO DARKENING WELDING HELMET PART #

DESCRIPTION

219.12.00202 AUTO DARKENING HELMET

DESCRIPTION

MODEL 870

2" X 4 1/4" STATIONARY GLASSHOLDER, SHIELD FOLDS TO 4 3/4" X 6 3/4"

MODEL 475

LEATHER WELDING HOODS

Top Quality, tough, flexible chrome leather hoods for use in hard to get to areas where there is no room for standard helmets. Lift front glassholder. Screened ventilation ports.

DESCRIPTION

WELDER CAN LIFT LID TO POSITION OR INSPECT WORK.

HIGH PERFORMANCE FILTER, SAFETY, COVER PLATES AND LENSES Full line of filter, safety and cover plates plus magnifiers. Includes top quality glass or plas-tic plates and lenses for virtually every metal fabrication application. Omni-View® Gold coated filters

Choice of glass or polycarbonate filters.

Polycarbonate safety plates, CR.39 cover plates.

© 2010 STEEL AND PIPES, INC.

WELDER’S IMAGE PROTECTIVE EYEWEAR Advanced designs provide all the welder requested features. Feather light, super strong frames, single high impact, scratch resistant lens. Contemporary, contoured styling fits comfortably under welding helmets. Available with shade 3.0 and 5.0 filter lens.

MODEL 2300N95

MODEL TW52N95

MODEL 7190N99

238

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


SAFETY EQUIPMENT DIVISION

WELDING®HELMETS

SUPERGLAS FIBERGLASS WELDING HELMETS Reliable Heavy Duty Protection MODEL 880

PART #

706 606

DESCRIPTION

DESCRIPTION

880

WIDE VISION

• 24 square inches of unobstructed viewing area with Flash Barrier MODEL 710

• Molded-in glassholder, telescoping lid provides a seal against light leak.

Specially formulated SUPERGLAS® material and rugged construction meets the needs of the most demanding welding environments. Self-extinguishing, smooth helmets deflect sparks and spatter. Reinforced crown, throat and edges resist cracking. All operating parts can be easily and economically replaced to lower service life cost. Full size, curved bottom design accommodates OSHA required protective spectacles; respirators and hearing protection while blocking smoke and fumes. Also available in straight front style for extended throat and chest protection. A broad selection of sizes and styles provides a performance level and a price point for any process or application.

PART #

DESCRIPTION

710 610

STATIONARY STATIONARY (STRAIGHT STYLE)

• Economical, stationary glassholde with exclusive Flash Barrier

THE ORIGINAL PIPELINER: DESIGNED FOR THE SPECIFIC NEEDS OF PIPE WELDERS Molded from SUPERGLAS PLUS®, a material formulated for lightweight and strength, PIPELINER provides everything pipe welders need in a helmet to be safe and productive under the harshest welding conditions. Impervious to moisture, impact resistant PIPELINERS will not crack, chip or split. Compact design allows access to areas where there is no room for a standard helmet. Comfortable, functional headgear uses a constant-fit rubber headband for frequent re-adjustments as pipe welders move about their work. Also available with a ratchet headgear for use where space limitations are not as severe.

PIPELINER® STYLE (COLOR: WHITE) PART #

110P 110

EXCEPTIONAL COMFORT

As tough as SUPERGLAS® helmets are, they are easy on the welder. Extremely lightweight. Equipped with Fibre-Metal's classic 3-C free floating headgear that balances and stabilizes the helmet while providing multiple adjustments for individual fit, feel and a better view of the work. A well protected, comfortable welder stays on the job longer and produces more no matter how tough the job.

WIDE VISION

• 24 square inches of unobstructed viewing area with Flash Barrier

SUPERGLAS® SUPERGLAS® (STRAIGHT STYLE)

TOUGH HELMETS FOR TOUGH JOBS

DESCRIPTION

680

DESCRIPTION

(WITH RUBBER HEADBAND) (WITH RATCHET HEADGEAR)

PIPELINER® ADF (COLOR: WHITE) PART #

DESCRIPTION

110P FMP BM 10 (WITH RUBBER HEADBAND) • PIPELINER style helmet with HIGH PERFORMANCE auto darkeningshade 10 filter lens

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

239

© 2010 STEEL AND PIPES, INC.

MODEL 706

PART #

PART #


SAFETY EQUIPMENT DIVISION

AUTO-DARKENING WELDING HELMETS •Variable Shade 9-13. •COMPATIBLE WITH ANY STANDARD

4.5 x 5.25 PROTECTION PLATE PATRIOT

NASCAR®

HEAVY METAL™

STYLE

VISTA 1000

NASCAR®

PATRIOT

HEAVY METAL™

219.15.K2602-2

219.15.K2602-3

219.15.K2602-4

• Variable Sensitivity – TIG/Grind mode. • Variable Delay – Great for tacking and high amperage welding. • One of the industry's largest view sizes up to 32% larger than the competition! • Protects against harmful ultra-violet and infra-red light. • No on/off switches to remember. • Solar powered, no batteries to change, no alkaline corrosion. • 4 independent arc sensors. • Light to Dark in 1/10,000 second. • Low 5 amp TIG threshold.

SOLAR POWER

TRIBAL

SLOW RIDER

Continuously variable control

BLACK PATRIOT

• For shade and sensitivity. • 9-13 shade control. - 700G External - 750S • Sensitivity – Adjustable for different welding environments. • Delay – Adjustable from dark back to light state on 700G

Light weight STYLE

BLACK

TRIBAL

SLOW RIDER

VIKING 700GS

K2815-1

K2812-1

K2830-1

RED ROD

BLACK

CRUZIN STICKS

PATRIOT

PATRIOT

K2831-1

ARC ANGEL

• 700G - 18.3 (520) • 750S - 19 (539)

Grind mode

• Offered on all models • Great for weld prep or post-weld clean up activities.

Magnifying ‘cheater’ lens capable • On 700G

All Helmets Come With Great Bonus Items Valued at over $25 Including:

© 2010 STEEL AND PIPES, INC.

• Sport-pak style helmet bag • Lincoln Electric® bandana.

240

STYLE

BLACK

RED ROD

CRUZIN STICKS

PATRIOT

ARC ANGEL

VIKING 750GS

K2836-1

K2834-1

K2835-1

K28431-1

K2833-1

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

Great Bonus Items!


SAFETY EQUIPMENT DIVISION

AUTO-DARKENING WELDING HELMETS

RF55300

TRIBAL ELECTRONIC HOOD

RF55301

FIRESTARTER ELECTRONIC HOOD

RF55303

AND BEYOND ELECTRONIC HOOD

RF55309

PUERTO RICO ELECTRONIC HOOD

RF55300

RF55301

RF55303

RF55309

219.15.RF55300

219.15.RF55301

219.15.RF55303

219.15.RF55309

• Easy to use • Visibility Area: 98 x 48 mm, 92 x 42 mm • Variable Shade 9-13 • Light to Dark in 1/25.000 second. • Face and Neck Proteccion • UV/IR protection •No on/off switches to remember. •Solar powered, no batteries to change, no alkaline corrosion. •Standards met CE, ANSI Z87.1 and AS/NZS 1338.1 •Weight- Very Light

Rent Welding Machines! • Innovative Solutions. • Performance and Reliability “Extreme Duty™” • Full range of rental welding machines. • Cost Effective.

Red-D-Arc Welderentals

We are your Industrial Supermarket • www.steelandpipes.com

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

241

© 2010 STEEL AND PIPES, INC.

We are the only representatives in Puerto Rico.


HOY

O R E R R E H L CLUB DE tros productos:

s e u n s o d o t n e o t n e 5 %* de descu IN CHAMBERLA

®

________

_______ _ _ _ _ _ _ _ _ _ _ _ _ ______

__________

_ Nombre_______

___

________ _ _ _ _ _ _ _ # io c o S

_________

______ _ _ _ _ _ _ _ ._ p x E __Fecha

cans no aplican a merizada. to en cu es D o. nt ue aplicar el desc ningún grosor sea negra o galvan recompra para poder ría co la 2 de cancía de to en om m n, tube 1x1 y 1x tos aplican a meron tada al ió en en cc , cu es tru pr es r ns D . se co H be de AT de o la , varil , MC stricci es aplican s” sa re Vi lin *La tarjeta s ur o, rta “p tiv ie ”, C ec ef ck o. is de en av r al et nta tiene que se elar estos descuentos sin previo cía en especial, “m o sea válido la ve nt ue sc de canc de el e qu Para amos el derechorje rv se re os N . al rs jida en la sucu ndiciones al dorso de esta ta ta. ver términos y co

Ahora en productos: CHAMBERLAIN

®


RENTAL EQUIPMENT

DIVISION


RENTAL DIVISION

GASOLINE ENGINE-DRIVEN WELDERS

EQUIPMENT SELECTOR

GX200 2+4 Welder Generator

DC CC 4kW

FUEL EFFICIENT LOW NOISE LEVEL 4,000 WATT AC GENERATOR AVAILABLE WITH ELECTRIC START 11HP GX340 HONDA GASOLINE ENGINE Exceptionally smooth output from the brushless, a synchronous alternator provides excellent welding arc characteristics and arc striking voltage. Lightweight and portable with auxiliary power available, even while welding. SPECIFICATIONS

DC AMPERAGE RANGE:

40 - 200 A

RATED OUTPUT:

200 A AT 23 VDC, 35% DUTY CYCLE 170 A AT 23 VDC, 60% DUTY CYCLE

AUXILIARY POWER:

4,000 WATTS, 60 HZ, 100% DUTY CYCLE ON 240 VAC 2,000 WATTS, 60 HZ, 100% DUTY CYCLE ON 120 VAC

WEIGHT:

219 LB (99.3 KG) PULL START, 230 LB (104.3 KG) WITH ELECTRIC START

DIMENSIONS:

H: 20" (508 MM) W: 19.25" (489 MM) L: 30.5" (775 MM)

OPTIONS • Shop-type undercarriage

DIESEL ENGINE-DRIVEN WELDERS

D300K 3+3 Welder

DC CC 3kW STICK WELDING WITH FIVE OUTPUT TAPS AND FINE CURRENT CONTROL BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS FUEL EFFICIENT V1903 KUBOTA DIESEL ENGINE3,000 WATTS AC AUXILIARY POWER The pure DC generator with all copper coils provides excellent welding characteristics. The welder’s choice for pipeline welding and general construction work. Constant speed engine for instant arc starting.The V1903 Kubota diesel engine provides reliable, efficient operation in even the most severe conditions.

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS

DC AMPERAGE RANGE:

40 - 350 A

RATED OUTPUT:

300 A AT 32 VDC, 60% DUTY CYCLE 250 A AT 30 VDC, 100% DUTY CYCLE

MAXIMUM OCV: 98

AUXILIARY POWER:

3,000 WATTS, 60 HZ, 15 AMPS WITH CIRCUIT BREAKER AND GFCI RECEPTACLE

WEIGHT:

1434 LB (650.5 KG)

FUEL CAPACITY:

15 GALLONS (57 L)

FUEL CONSUMPTION:

0.44 GPH (1.65 LPH)

DIMENSIONS:

H: 20" (508 MM) W: 19.25" (489 MM) L: 30.5" (775 MM)

OPTIONS • Construction trailer • RC4 remote control • TIG welding with K930-2 TIG module • 240 VAC auxiliary power.

244

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


EQUIPMENT SELECTOR

D500K 5+3 Welder

DC CC 3kW

FULL RANGE AMPERAGE CONTROL AND JOB SELECTOR (OCV) CONTROLBUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS FUEL EFFICIENT KUBOTA F-2803 DIESEL ENGINE 3,000 WATTS AC AUXILIARY POWER

RENTAL DIVISION

DIESEL ENGINE-DRIVEN WELDERS

For demanding jobs that call for high amperage capabilities using electrodes up to 1/4" in diameter and air carbon arc (CAC-A) gouging with carbons up to 5/16"in diameter. Precise control of both current control and open circuit voltage for optimum arc characteristics. SPECIFICATIONS

OPTIONS • Construction trailer • RC4 remote control • TIG welding with K930-2 TIG module • 240 VAC auxiliary power.

DC AMPERAGE RANGE:

50 - 575 A

RATED OUTPUT:

400 A AT 36 VDC, 60% DUTY CYCLE 350 A AT 34 VDC, 100% DUTY CYCLE

AUXILIARY POWER:

3,000 WATTS, 60 HZ, 15 AMPS WITH CIRCUIT BREAKER

WEIGHT:

1866 LB (846.4 KG)

FUEL CAPACITY:

15 GALLONS (57 L)

FUEL CONSUMPTION:

1.79 GPH (6.78 LPH) AT RATED LOAD

DIMENSIONS:

H: 44.25" (1124 MM) W: 27" (686 MM) L: 73.5" (1867 MM)

DIESEL ENGINE-DRIVEN WELDERS

D302K 3+12 Welder

DC CC CV 12kW STICK, MIG, LIFT-ARC DC TIG, FLUX-CORED WELDING AND AIR CARBON ARC GOUGING BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS KUBOTA V1505-E2BG1, TIER 2, 20.2 HP LIQUID-COOLED DIESEL ENGINE12,000 WATTS PEAK, 10,000 WATTS CONTINUOUS 120/240 VAC POWER The 3+12 is a constant current/constant voltage, DC diesel engine-driven welder with a high-efficiency, three-phase welding generator that requires less fuel but has enough power for gouging with up to 1/4" carbons. Output adjustment is via a potentiometer-type, full-range, Amperage/Voltage Adjust Control and a six-range Process/Contactor Control switch which includes four arc-drive (dig) settings in Stick mode. Remote contactor control, as well as remote amperage and voltage control, are via 3-pin and 14-pin MS-style receptacles on the front panel. SPECIFICATIONS

DC AMPERAGE RANGE:

20 - 410 A

DC VOLTAGE RANGE:

14 - 40 V

MAXIMUM OCV: 65

RATED OUTPUT:

300 A AT 32 VDC, 60% DUTY CYCLE 400 A AT 23 VDC, 30% DUTY CYCLE

AUXILIARY POWER:

SINGLE-PHASE GENERATOR POWER PEAK: 12,000 WATTS CONTINUOUS: 10,000 WATTS 83/42 A, 120 GFCI/240 VAC, 60 HZ

WEIGHT:

1200 LB (544 KG)

FUEL CAPACITY:

11.5 GALLONS (43.5 L)

DIMENSIONS:

H: 32" (813 MM) W: 26" (660 MM) L: 56" (1422 MM)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

245

© 2010 STEEL AND PIPES, INC.

NEW!

MAXIMUM OCV: 97


RENTAL DIVISION

STICK WELDERS AND PACKS

Multioperator System

EQUIPMENT SELECTOR

PROCESSES Stick, DC TIG with Touch-Start

ES275i 4Pak

DESCRIPTION 275 amp at 35% duty cycle, constant current, DC, inverter welder with 1/3 phase, 50/60 Hz input INPUT VOLTAGES: • Individual Welders: 208/230/460/575/1/3/60 220/380/400/415/440/1/3/50 • 4Pak and 8Pak Multioperator: 460/575/3/60 CONFIGURATIONS Available as individual welders and 4Pak or 8Pak Multioperator welding systems. 4Paks include either insulated bases or carts with casters. 8Paks include bases with optional, add-on casters. 4Pak mounts on either an insulated base or a cart with casters for easy moving OPERATION • Stick and TIG Weld Modes • Output Control controls the output current over the entire output range and can be adjusted under load. When using remote control this function becomes the limit setting • Arc Force is only active in Stick weld mode • Hot Start is only active in Stick weld mode and is fixed at 160% of the set current or 275 amps whichever is larger then quickly reverts to the set current in 0.4 seconds • Voltage reconnect is via a side panel access door • Remote Control is via a 3-pin MS-style receptacle

FEATURES • Outstanding E6010 and E7018 performance using up to 7/32" diameter electrodes that enables both whip or drag techniques for a variety of applications • Touch-Start TIGallows DCTIG welding without high frequency starting • Adjustable Arc Force and two-position Hot Start switch for enhanced arc control • Potentiometer-type remote control • Light-weight and compact design • No output derating when operated on single-phase power • Meets IP23S environmental rating • Extreme-Duty environmental protection • Manufactured under ISO 9001 certification • 4Pak and 8Pak are small enough to fit through a 36" wide pedestrian door • Tweco style output terminals • 10' long, 8 AWGinput cord for all 3 phase voltages • Optional Primary Ground Protector available for 4Pak and 8Pak

PORTABLE SMOKE EXTRACTORS

SE1602W Smoke Extractor TWO OPERATING SPEEDS RSE200WF REUSABLE, WASHABLE FILTER STAINLESS STEEL CONSTRUCTION Filter can be blown out with air or washed and precoated. Dual bypass motors. Includes 15' hose with magnetic locator.

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS

WEIGHT: INPUT: CAPACITY: DIMENSIONS:

246

42 LB (19 KG) 120 VAC 160 CFM H: 13.75" (349 MM) W: 10.75" (273 MM) L: 28.75" (730 MM)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


EQUIPMENT SELECTOR

Multioperator System

ES275i 8Pak WEIGHTS AND DIMENSIONS ES275i

RENTAL DIVISION

STICK WELDERS AND PACKS

Weight: 54.5 lb (24.7 kg) H: 13.6" (345 mm) W: 9.0" (229 mm) D: 20.25" (514 mm)

ES275i 4Pak (on cart with casters) Weight: 480 lb (217.7 kg) H:44.5" (1130 mm) W: 31" (787 mm) D: 35.75" (908 mm)

ES275i 8Pak (on insulated base with casters) Weight: 987 lb (447.7 kg) H: 46.75" (1187 mm) W: 60" (1524 mm) D: 27.5" (699 mm)

Shown with optional casters

SPECIFICATIONS (INDIVIDUAL WELDERS) INPUT POWER

RATED OUTPUT

INPUT CURRENT AT RATED OUTPUT

OUTPUT RANGE

208/230/460/575/3/60

275 AMPS, 31 VOLTS, 35% 250 AMPS, 30 VOLTS, 60% 200 AMPS, 28 VOLTS, 100%

38/37/19/16 34/33/17/14 27/25/13/11

5 - 275 AMPS DC

208/230/460/575/1/60

275 AMPS, 29-31 VOLTS, 35% 250 AMPS, 30 VOLTS, 60% 200 AMPS, 28 VOLTS, 100%

68/67/38/31 63/62/33/27 49/48/26/21

220/380/400/415/440/3/50

250 AMPS, 30 VOLTS, 35% 200 AMPS, 28 VOLTS, 100%

32/20/19/18/17 25/15/15/14/13

220/380/400/415/440/1/50

250 AMPS, 30 VOLTS, 35% 200 AMPS, 28 VOLTS, 100%

63/42/40/38/36 48/32/30/29/27

Mark VIII-2

5 - 250 AMPS DC

DC CC 2kW STICK (SMAW) AND DC TIG (GTAW) WELDINGAIR CARBON ARC CUTTING AND GOUGING (CAC-A)FLUX-CORED (FCAW), MIG WELDING WITH VOLTAGE-SENSING WIREFEEDERS This multioperator welding system drives eight modules from a single main transformer. Each welding module features remote control and a wide range of amperage settings. DC AMPERAGE RANGE:

SINGLE MODULE: 35 - 300 A

MAIN TRANSFORMER:

800 A, 100% DUTY CYCLE OR 1600 A, 25% DUTY CYCLE SINGLE MODULE: 200 A, 60% DUTY CYCLE 230/460/575 V MAXIMUM OCV: 80 230V 460V 575V KVA KW 170 A 85 A 68 A 68 A 48.6 A 4050 LB (1837 KG) H: 70.25" (1784 MM) W: 72" (1829 MM) D: 40" (1016 MM)

RATED OUTPUT AT 40 VOLTS: INPUT VOLTAGES: INPUT AT RATED OUTPUT: WEIGHT:

OPTIONS

• RHC3 Remote Control • HF251D Arc Starter

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

247

© 2010 STEEL AND PIPES, INC.

SPECIFICATIONS


RENTAL DIVISION

MULTIPROCESS POWER SOURCES

EQUIPMENT SELECTOR

EXtreme 360 Inverter Welder

DC CC CV

STICK, MIG, TIG, FLUX-CORED WELDING PROCESSES PULSED MIG CAPABILITIES WITH OPTIONAL OPTIMA CONTROL BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS AVAILABLE AS 4PAK AND 8PAK MULTIOPERATOR SYSTEMS DESCRIPTION 350 amp at 60% duty cycle, constant current/constant voltage, DC inverter welder. Standard features include Auto-Line, Ammeter and Voltmeter, adjustable Arc Control, full Remote Control capability and Extreme-Duty construction. VOLTAGE INPUT Individual Units: Auto-Line Power Management Technology allows for operationwith any type of primary power from 208 to 575 VAC, single- or three-phase, 50 or 60 hertz with no manual linking required - ideal for dirty or unreliable power. 4Pak and 8Pak Multioperator units include DP120 panels and operate with 460/575/3/60 input power. FEATURES Wind Tunnel Technology protects electrical components and PC boards from contamination. Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and amount of contaminents pulled through the machine. Lift-Arc allows TIGstarting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten. Adaptive Hot Start increases the output amperage at the start of the weld if necessary, eliminating electrode sticking. Inverter arc control provides greater puddle control for superior electrode performance. Line voltage compensation keeps power constant even if power input varies by ± 10% on 575 volt power and +37%/-59% on 460 voltpower. Process selector switch reduces the number of control setup combinationswithout reducing any features. Large, dual digital meters are easy to view and presettable to ease setting weld output. Pulsed MIGcapabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission. Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight. Optional 114 VAC auxiliary power is available.

NEW!

INPUT POWER

RATED OUTPUT AT 60% DUTY CYCLE

Three-Phase Single-Phase

350 A at 34 VDC 300 A at 32 VDC

VOLTAGE RANGE IN CV MODE

10 - 38 V 10 - 38 V

AMPERAGE RANGE MAX. OPENIN CC MODE CIRCUIT VOLTAGE

5 - 425 A 5 - 425 A

75 VDC 75 VDC

© 2010 STEEL AND PIPES, INC.

EXTREME 360 4PAK AND 8PAK MULTIOPERATOR SYSTEMS These Paks are easily maneuvered around most jobsites when mounted on the optional wheel kit. Excellent stick welding performance with up to 425 DC amps per arc combined with the features of a high-end MIG machine make this a very versatile system.

248

EXTREME360 SPECIFICATIONS

4PAK SPECIFICATIONS

8PAK SPECIFICATIONS

Weight: 80 lb (36.3 kg) H: 17" (432 mm)) W: 12.5" (318 mm) D: 24" (610 mm) Input Power: 208-575/1/3/50/60

Weight: 700 lb (320 kg) H: 54.5" (1384 mm) W: 31.5" (800 mm) D: 32" (813 mm) Input Power: 460/575/3/50/60

Weight: 1400 lb (640 kg) H: 109" (2768 mm) W: 63" (1600 mm) D: 64" (1626 mm Input Power: 460/575/3/50/60

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


LN25 Portable Wirefeeder

EQUIPMENT SELECTOR

DC CV CC

CONTROL CABLE NOT REQUIRED OPERATES OFF WELDER ARC VOLTAGE FOR MIG AND FLUX-CORED WELDING MAXIMUM VERSATILITY AND PORTABILITY

RENTAL DIVISION

WIREFEEDERS

This wirefeeder operates off arc voltage with a voltage sensing control circuit so a control cable is not required. To operate, simply connect the welding cable from the power source, attach the work clip and you’re ready to weld. Includes a voltmeter, a gas solenoid, and an internal contactor. Can be operated with all electric and engine-driven welders with CV capability but can also be used with CC welders for non-critical welds. The LN25 provides constant wire feed speed for use with CV power sources and arc-sensing wire feed speed for CC power sources and will handle weld currents up to 300 amps at 60% duty cycle. For MIG and flux-cored arc welding processes using from 10 lb to 44 lb wire spools. Specify wire size and type for correct drive roll selection. SPECIFICATIONS

WELD CURRENT CAPACITY:

AIR: 250 A AT 100% DUTY CYCLE WATER: 400 A AT 100% DUTY CYCLE WIRE FEED SPEED: 70 - 875 IPM (1.8 - 22.2 M/MIN) WIRE DIAMETER CAPACITY: .030 - 1/16" ALUMINUM WIRE MAXIMUM SPOOL SIZE CAPACITY: 12" (305 MM) INPUT POWER: 24 VAC, 50/60 OR 100 HZ H: 16" (406 MM), W: 9.25" (235 MM), L: 21.25" (540 MM) XR-CONTROL DIMENSIONS: XR-CONTROL WEIGHT: 38 LB (17.2 KG)

SPOOL GUNS

XR-Control with XR-A or XR-W Edge Gun MIG ALUMINUM AND SOFT ALLOY PROCESSESXR-A AIRCOOLED AND XR-W WATER-COOLED GUN VERSIONSFOR .030" THRU 1/16" ALUMINUM WIRE SIZES 15', 30' AND 50' GUNS The XR push-pull wire feed systems offer the choice of air- or water-cooled MIG guns for truly customized systems for particular applications. Standard digital wire feed speed and volt meters provide easy indication and control of weld parameters. Unique solid-state control circuit permits XR systems to operate with most CC, CV or CC/CV DC welding power sources. True push-pull design provides continuous torque to wire. Gun motor controls actual wire feed speed at arc. Each motor works in concert to provide accurate and positive wire feed speed. Master/gun wire feed speed control improves improves arc starting resolution by limiting speed range at the gun. Adjustable wire run-in control Gun rotates 360 degrees for various welding positions, reducing fatigue. SPECIFICATIONS

AIR: 250 A AT 100% DUTY CYCLE WATER: 400 A AT 100% DUTY CYCLE WIRE FEED SPEED: 70 - 875 IPM (1.8 - 22.2 M/MIN) WIRE DIAMETER CAPACITY: .030 - 1/16" ALUMINUM WIRE MAXIMUM SPOOL SIZE CAPACITY: 12" (305 MM) INPUT POWER: 24 VAC, 50/60 OR 100 HZ H: 16" (406 MM), W: 9.25" (235 MM), L: 21.25" (540 MM) XR-CONTROL DIMENSIONS: XR-CONTROL WEIGHT: 38 LB (17.2 KG)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

249

© 2010 STEEL AND PIPES, INC.

WELD CURRENT CAPACITY:


RENTAL DIVISION

TIG WELDERS

EQUIPMENT SELECTOR

SYNCROWAVE 350 LX

AC DC CC 1 Phase Input OUTPUT RANGE OF 4 TO 400 AMPS CONSTANT CURRENT SQUAREWAVE TECHNOLOGYSTICK (SMAW), AC/DC TIG (GTAW), PULSED TIG (GTAW-P) WELDING An exceptional single-phase TIG/Stick power source designed for the master welding craftsman. Delivers up to 400 amps of welding current. User friendly front panel with easy-to-use push buttons for process set-up. Includes pulser with preflow and post flow settings. Also available with an optional TIG sequencer. Lift-Arc circuit allows DC TIGstarting without the use of high frequency. Balance/Dig controls, Pulser, Memory recall and digital volt and amp meters are included. Optional equipment includes start time/spot time control, crater time control, sequence selection switch, start and final current control. Available with running gear, coolant system for water-cooled TIG applications and a variety of foot and hand remote controls. SPECIFICATIONS

WELDING AMPERAGE RANGE:

3 - 400 A

RATED OUTPUT:

350 A, 34 V AT 40% DUTY CYCLE

MAXIMUM OCV: 80 V

INPUT CURRENT AT RATED-LOAD: 150 A AT 200 VAC, 131 A AT 230 VAC, 66 A AT 460 VAC, 53 A AT 575 VAC

Shown with Cool Runner 3X coolant system and remote foot control

RATED OUTPUT:

300 A, 32 V AT 60% DUTY CYCLE 129 A AT 200 VAC, 112 A AT 230 VAC, 56 A AT 460 VAC, 45 A AT 575 VAC

WEIGHT:

355 LB (161 KG) H: 37.875" (962 MM) W: 22.875" (581 MM) L: 25.25" (641 MM)

PLASMA CUTTERS (PAC)

PYTHON Plasma Cutter

CC DC PRODUCTION CUTTING CAPACITY 3/4" AT 18 IPM RECOMMENDED CUTTING CAPACITY 1" AT 11 IPM MAXIMUM CUTTING CAPACITY 1 1/4" AT 7 IPM Has the same features as the Viper plasma cutter with 80 amps of power for world class cutting performance up to 1" in only a 95 lb package. The patent-pending PCT80 hand plasma torch is included and a machine torch and robotic torch are also available. CNC/Robotic interface is standard. The standard PCT80 hand torch uses only 3 consumable parts and is also used with the Viper plasma cutter. SPECIFICATIONS

RATED OUTPUT: PILOT CURRENT: AIR PRESSURE REQUIRED: © 2010 STEEL AND PIPES, INC.

INPUT VOLTAGE:

OPTIONS • Machine Torch, w/25' leads • K1571-3 Robotic Torch, w/25' leads • K1571-5 Combination Circle Cutting Kit • K1625-1 Valet-Style Undercarriage • K1838-1

250

WEIGHT INCLUDING UNDERCARRIAGE:

80 A AT 60% DUTY CYCLE, 65 A AT 100% DUTY CYCLE 18 A CURRENT RANGE: 35 - 85 A 70 PSI FLOW RATE: 400 CFH K1581-6 208V/230V/460V/1/3PH/50/60HZ K1581-5 460V/575V/3PH/50/60HZ 145 LB (65.8 KG) H: 23.5" (597 MM) W: 17" (432 MM) L: 32" (813 MM)

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


INDUSTRIAL GASES DIVISION


INDUSTRIAL GASES DIVISION


INDUTRIAL GASES DIVISION

INDUSTRIAL GASES

Type of Gases

© 2010 STEEL AND PIPES, INC.

• Oxygen (O2) • Acetylene • Argon • Nitrogen • Argon mixture 75% and CO2 25% • Industrial gases • Carbon dioxide

252

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com Email: www.steelandpipes.com


Oxygen (O2) Code: SP-20 Type of Valve: 540 Weight: 13 lbs. Dimensions: 5.25” O.D./ 13.75” Tall

Code: SP-40 Type of Valve: 540 Weight: 22 lbs. Dimensions: 7” O.D./ 17.50” Tall

Code: SM-125 Type of Valve: 540 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall

Code: ST-300 Type of Valve: 540 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall

Code: SA-40 Type of Valve: 520 Weight: 23 lbs. Dimensions: 7” O.D./ 23” Tall

Code: SA-145 Type of Valve: 300 Weight: 74 lbs. Dimensions: 8.25” O.D./ 40” Tall

Code: SA-390 Type of Valve: 300 Weight: 169 lbs. Dimensions: 12.25” O.D./ 46.25” Tall

Code: SP-40 Type of Valve: 580 Weight: 22 lbs. Dimensions: 7” O.D./ 17.50” Tall

Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall

Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall

Code: SCO-20 Type of Valve: 320 Weight: 34 lbs. Dimensions: 7.75” O.D./ 25” Tall

Code: SCO-50 Type of Valve: 320 Weight: 109 lbs. Dimensions: 9” O.D./ 45” Tall

Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall

Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall

Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall

Code: SK-224 Type of Valve: 580 Weight: 113 lbs. Dimensions: 9” O.D./ 51” Tall

Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall

Code: SP-20 Type of Valve: 580 Weight: 13 lbs. Dimensions: 5.25” O.D./ 13.75” Tall

Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall

Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall

INDUSTRIAL GASES DIVISION

Type of Gases

is identified with the color blue

Acetylene

Code: SA-10 Type of Valve: 200 Weight: 7.5 lbs. Dimensions: 4” O.D./ 15” Tall is identified with the color red

Argon

is identified with the color green

Carbon dioxide

is identified with the color black

Argon mixture 75% and CO2 25%

is identified with the color brown

Industrial Helium

is identified with the color purple

is identified with the color white

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

253

© 2010 STEEL AND PIPES, INC.

Nitrogen


STEEL AND PIPES

FABRICATORS & MANUFACTURING, INC. • Structural Steel Fabricators & Erectors • Miscellaneous Metal Fabricators • Pre-Engineered Metal Exclusive distributor Buildings for Puerto Rico and the Caribbean

• Stainless Steel Railings • Bolted Steel Tanks

T. (787) 747-9415 / 9416 • F. (787) 747-8986 / 8987 Km 27.5 Road #1, Rio Cañas, Caguas, P.R. 00726 www.steelandpipes.com


PAINTS

DIVISION


PAINTS DIVISION

RECTANGULAR TUBING TYPES OF CORROSION

ONE OF THE MOST IMPORTANT ASPECTS OF METAL SURFACE PROTECTION, IS AN ADEQUATE CLEANING AND PREPARATION OF THE SUBSTRATE PRIOR TO PAINTING; IN ORDER TO PROVIDE SUITABLE ANCHORAGE FOR COATINGS. New metal surfaces (virtually intact): thorough cleaning of the surface with a degreaser, afterwards applying one coat of anticorrosive primer and two coats of finish Metal surfaces where corrosion process has begun: thorough cleaning of the surface with a degreaser, using a wire-brush or sandpaper on areas where rust is present. Apply one coat of anticorrosive primer and two coats of finish. Metal surfaces with advances corrosion: deep cleaning using power tools such as sandblas ting and grinding. Apply one coat of anticorrosive primer and two coats of finish.

GUIDE OF PRODUCTS

METALLIC FINISH FAST DRY ENAMEL

© 2010 STEEL AND PIPES, INC.

Modified alkyd resins specially formulated to improve glossiness, drying, and resistance to outdoor conditions. Excellent for surfaces near marine environments. ITEM NUMBER

DESCRIPTION

650.A.423 650.A.400 650.24115 650.7055 650.A.4067 650.A.401

FAST DRY GLOSS BLACK (GAL) FAST DRY GLOSS WHITE (GAL) FAST DRY ENAMEL YELLOW (GAL) FAST DRY PRIMER GRAY GAL FAST DRY PRIMER WHITE GAL FAST DRY WHITE PAINT (PAILA)

256

A revolutionary new concept in protection for metals. It is a self-priming finish, with great coverage, in an eggshell, antique finish. This product is ideal for gates, fences, and any form of decorative iron. ITEM NUMBER

DESCRIPTION

650.A.845 650.A.846Q 650.A.847 650.A.847Q 650.A.607 650.A.607Q 650.A.665 650.A.815 650.A.815Q 650.A.700

METALLIC COPPER 845 GAL METALLIC COPPER 845 QUART METALLIC GOLD 847 GAL METALLIC GOLD 847 QUART METALLIC GREEN DARK 607 GAL METALLIC GREEN DARK 607 QUART METALLIC GREEN OXIDE 665 GAL METALLIC ZINC 815 GAL METALLIC ZINC 815 QUART METALLIC BLACK 700 GAL

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


PAINTS DIVISION ANTIRUST ACRYL COAT

A new concept in coating for galvanized iron, blends innovative components that make it far superior to other conventional anticorrosive acrylic products. When applying on black iron or carbon steel, use of an alkyd primer is required. This product prevents mildew growth as well. ITEM NUMBER

650.A.000

DESCRIPTION

ZINC PHOSPHATE

Alkyd primer for use in circumstances where a metal protection system of the highest is needed. ITEM NUMBER

650.A.410 650.A.411

DESCRIPTION

ZINC PHOSPHATE PRIMER (GAL) WHITE ZINC PHOSPHATE PRIMER GAL GRAY

ANTIRUST ACRYL COAT H.G. WHITE (GAL)

RED OXIDE CROMOIL FLAT

Premium, flat, alkyd finish formula, that offers high resistance to washing, superior performance, great coverage, and notably less odors during application; for indoor and outdoor use. ITEM NUMBER

650.35934

DESCRIPTION

CROMOIL FLAT BLACK (GAL)

Alkyd primer for use in circumstances where a metal protection system of the highest is needed. ITEM NUMBER

650.39111 650.39112 650.39110 650.39114 650.39113

DESCRIPTION

RED OXIDE (GAL) RED OXIDE (PAIL) RED OXIDE (QUART) RED OXIDE WATER BASE (GAL) RED OXIDE(PAIL) WATER-LATEX

ANTIRUST ENAMEL

Alkyd resins finish, specially formulated for high resistance to exteriors and interiors; high gloss, and available in many colors.

650.7050 650.A.403 650.A.403Q

Alkyd primer for use in circumstances where a metal protection system of the highest is needed.

DESCRIPTION

ANTIRUST ENAMEL DORADO (QT) ANTIRUST ENAMEL OLD SAN JUAN (GAL) ANTIRUST ENAMEL OLD SAN JUAN (QT)

ITEM NUMBER

650.39109 650.35930

DESCRIPTION

GREEN OXIDE (QUART) GREEN OXIDE PRIMER GAL

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

257

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER

GREEN OXIDE


PAINTS DIVISION

ZINC GALVANIZING SPRAY COATING

Spray Galvanize 309 produces a cathodic coating that will stop corrosion on ferrous surfaces. The coating is equal to hot dip galvanizing in protection, film durability and protection against corrosion action of salt. a light coating of SPRAY GALV 309 uder a coat of paint prevents corrosive action.

RUS-KIL BLP COLD GALVANIZE

BLP RUS-KIL Cold Galvanize is a high quality, fast drying coating for touch up and repair of galvanized surfaces. This product is good for repairing “weld seams” and damaged areas on gates, piping and structural steel trailers or most galvanized surfaces. • Effective at preventing rust & corrosion. • Provides up to 3 years of protection. • Fast drying. Fast recoat • Several thin coats provides better coat than one heavy coat. • Excellent resistance to dry heat. ITEM NUMBER

650.7040 650.7035

ITEM NUMBER

650.7030

DESCRIPTION

COLD GALV SPRAY (12 OZ)

CROMOX PAINT THINNER

CROMOX Paint Thinner effectively thins oil-based paint, stain and varnish. It can also be used to clean brushes and equipment immediately after use. ITEM NUMBER

650.42106

DESCRIPTION

LACQUER THINNER (GAL)

DESCRIPTION

COLD GALV COMPOUND PAINT-GAL COLD GALV COMPOUND PAINT-QUART

4 PC. PAINT KIT ITEM NUMBER

649.90780

DESCRIPTION

4PC KIT BANDEJA

• 1 Coat Coverage • Includes: - Deep heavy duty plastic tray - All purpose roller 9” x 3/8” - Consumer (5 wire) roller frame - Bristle & nylon 2” brush

METALLIC FISNISHES

Smooth flowing paint. Ready mixed. Will not tarnish in the container. Solvent based assures you of brilliant lustre on any work of art. Use clear exterior topcoat for exterior applications.

© 2010 STEEL AND PIPES, INC.

ITEM NUMBER

650.B30 650.B31 650.B32 650.B33

258

DESCRIPTION

ALUMINUM PAINT PLASTIKOTE GOLD LEAF PAINT PLASTIKOTE COPPER PAINT PLASTIKOTE BRASS PAINT PLASTIKOTE

PAINT BRUSHES-100% PURE BRISTLE ITEM NUMBER

8.BRUSH1 8.BRUSH2 8.BRUSH3

DESCRIPTION

PAINT BRUSH 1-1/2" PAINT BRUSH 2" PAINT BRUSH 3"

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


STRUCTURAL STEEL

DIVISION


STRUCTURAL STEEL DIVISION

ANGLES-STRUCTURAL SIZES

STRUCTURAL SHAPES

L Standard Lenght 20’, 30’, 40’

B

Structural Steel Shapes conform to the ASTM (America Society for Testing and Materials) MINIMUM

MECHANICAL

PROPERTIES

TENSILE STRENGTH PSI

MINIMUM YIELD STRENGTH, PSI

CARBON CONTENT

% ELONGATION IN 2” 23

A-36

56,000 - 80,000

36,000

.26 MAX

A-572

65,000

50,000

.26 MAX

REMEMBER! We Can Repair And Fix Your Welding Machine Or Plasma Cutting Machines

• Repair • Parts • Service

© 2010 STEEL AND PIPES, INC.

C A

260

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


L

L

Standard Lenght 20’, 30’, 40’

C A

Standard Lenght 20’, 30’, 40’

C A

B

B

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

261

STRUCTURAL STEEL DIVISION

ANGLES-STRUCTURAL SIZES

© 2010 STEEL AND PIPES, INC.

ANGLES-STRUCTURAL SIZES


STRUCTURAL STEEL DIVISION

STRUCTURAL CHANNELS Standard Lenght 20’, 30’, 40’

D

STRUCTURAL CHANNELS C

Standard Lenght 20’, 30’, 40’ A

A

B

B

© 2010 STEEL AND PIPES, INC.

6

262

D

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

C


Standard Lenght 20’

D

C

STANDARD “I” BEAMS OR “S” BEAMS I

A

C

Standard Lenghts 20’, 30’, 40’

B

D

A B

STRUCTURAL STEEL DIVISION

STRUCTURAL CHANNELS

ASTM A-36

STAIR STRINGER CHANNELS

10 1.125 10 1.50 12 1.50

.150 .170 .190

x x x

6.5 8.4 10.6

130 168 212

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

263

© 2010 STEEL AND PIPES, INC.

Standard Lenght 20’


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

“WF” FLANGE BEAMS WF

Standard Lenghts 20’, 30’, 40’

“WF” FLANGE BEAMS B D

WF

Standard Lenghts 20’, 30’, 40’

A

C

ASTM A-36, A-572, A992

264

B D

C

ASTM A-36, A-572, A992

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

A


Standard Lenghts 20’, 30’, 40’

B D

WF

Standard Lenghts 20’, 30’, 40’

B

A

C

ASTM A-36, A-572, A992

D

A

C

ASTM A-36, A-572, A992

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

265

STRUCTURAL STEEL DIVISION

WF

“WF” FLANGE BEAMS

© 2010 STEEL AND PIPES, INC.

“WF” FLANGE BEAMS


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

“WF” FLANGE BEAMS WF

Standard Lenghts 20’, 30’, 40’

“WF” FLANGE BEAMS B D

WF

Standard Lenghts 20’, 30’, 40’

A

C

ASTM A-36, A-572, A992

266

B D

C

ASTM A-36, A-572, A992

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

A


Standard Lenghts 20’, 30’, 40’

B D

WF

Standard Lenghts 20’, 30’, 40’

B

A

C

ASTM A-36, A-572, A992

D

A

C

ASTM A-36, A-572, A992

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

267

STRUCTURAL STEEL DIVISION

WF

“WF” FLANGE BEAMS

© 2010 STEEL AND PIPES, INC.

“WF” FLANGE BEAMS


STRUCTURAL STEEL DIVISION

“WF” FLANGE BEAMS WF

Standard Lenghts 20’, 30’, 40’

“WF” FLANGE BEAMS B D

WF

Standard Lenghts 20’, 30’, 40’

A

C

ASTM A-36, A-572, A992

B D

A

C

ASTM A-36, A-572, A992

We have all the Safety Equipment that you need for your projects

© 2010 STEEL AND PIPES, INC.

• Gloves • Helmets • Sunglasses • and much more . . . KincoPro ™

268

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Standard Lenghts 20’, 30’, 40’

STRUCTURAL STEEL DIVISION

WF

HOT ROLLED FLAT BARS B D

Standard Lenghts 20’ A

C

ASTM A-36, A-572, A992

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

269

© 2010 STEEL AND PIPES, INC.

“WF” FLANGE BEAMS


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

HOT ROLLED FLAT BARS Standard Lenghts 20’

270

HOT ROLLED FLAT BARS Standard Lenghts 20’

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Standard Lenghts 20’

STRUCTURAL STEEL DIVISION

HOT ROLLED FLAT BARS

HOT ROLLED FLAT BARS Standard Lenghts 20’

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

271

© 2010 STEEL AND PIPES, INC.

REINFORCING BARS


Standard Lenghts 20’

HOT ROLLED SQUARES

© 2010 STEEL AND PIPES, INC.

Standard Lenghts 20’

272

We Fabricate anything in Steel, Stainless Steel or Aluminum d Bars / Square Bars - Varilla Redonda / Varilla Cuadrada

STRUCTURAL STEEL DIVISION

HOT ROLLED ROUNDS

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


Commercial quality - low carbon

STRUCTURAL STEEL DIVISION

HOT ROLLED STEEL SHEETS

SHEET SELECTION GUIDE

ACUERDATE...

Si aún no eres miembro del CLUB DE HERREROS solicita tu aplicación HOY CHAMBERLAIN

®

_________

________________

________________

Nombre__________

___

________________

Exp.____ a __________Fecha Descuentos no aplican o grosor sea negra Socio#__________ poder aplicar el descuento. 1x1 y 1x2 de ningúnDescuentos aplican a de la compra para de construcción, tubería presentada al momento Visa, MC o ATH. previo aviso. Ciertas *La tarjeta debe ser “metal deck”, “purlins”, varilla sin tiene que ser en efectivo, sea válido la ventael derecho de cancelar estos descuentos mercancía en especial, que el descuento galvanizada. Para en la sucursal. Nos reservamos dorso de esta tarjeta. mercancía recojida ver términos y condiciones al restricciones aplican,

CHAMBERLAIN

®

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

273

© 2010 STEEL AND PIPES, INC.

AHORA EN PRODUCTOS:

HERRERO s: CLUB DEL producto en todos nuestros

5 %* de descuento


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

PLATES Commercial and specification grades

274

STEEL PLATES Universal Mill and Sheared

7.65

244.80 306.00 367.20 612.00 382.50 459.00 765.00 459.00 918.00 1,224.00 3,060.00

10.20

326.40 408.00 489.60 816.00 510.00 612.00 1,020.00 612.00 1,224.00 1,428.00 1,632.00 3,264.00 4,080.00

12.75

408.00 510.00 612.00 1,020.00 637.50 765.00 1,275.00 1,530.00 1,785.00 2,040.00 4,080.00 5,100.00

15.30

489.60 612.00 734.40 1224.00 765.00 918.00 1,836.00

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


STRUCTURAL STEEL DIVISION

STEEL PLATES

Universal Mill and Sheared

Universal Mill and Sheared

2,142.00 2,448.00 3,672.00 4,896.00 3,060.00 6,120.00 20.40

25.50

30.60

652.80 816.00 979.20 1,020.00 1,224.00 2,448.00 2,856.00 3,264.00 4,896.00 6,528.00 4,080.00 8,160.00 816.00 1,020.00 2,040.00 1,275.00 1,530.00 3,060.00 3,570.00 4,080.00 8,160.00 979.20 1,224.00 1,530.00 3,672.00 4,284.00 4,896.00 9,792.00

35.70

5,712.00

40.80

1,305.60 1,632.00 3,264.00 2,040.00 2,448.00 4,896.00 5,712.00 6,528.00 13,056.00

45.90

7,344.00 9,180.00

51.00

1,632.00 2,040.00 4,080.00 2,550.00 6,120.00 8,160.00

61.20

1,958.40 2,448.00 4,896.00 3,060.00 1,958.40 9,792.00

71.40

2,284.80 2,856.00 11,424.00

81.60

2,611.20 3,264.00 6,528.00 13,056.00

91.80

2,937.60 7,344.00 14,688.00

102.00

3,264.00 8,160.00 16,320.00

112.00

3,584.00 17,920.00

122.40

3,916.80 19,584.00

142.80

4,569.60 22,848.00

163.20

5,222.40 13,056.00

183.60

5,875.20 29,376.00

204.00

6,528.00 16,320.00 32,640.00

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

275

© 2010 STEEL AND PIPES, INC.

STEEL PLATES


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

FLOOR PLATE

Máquinas de Soldar y de Plasma para la VENTA

Floor Plate or (Checkered Plate)

6.15

196.80 246.00 295.20 492.00 307.50 615.00

8.70

278.40 348.00 696.00 435.00 870.00 1,044.00 1,392.00

RENTA de Máquinas de Soldar y Plasma

11.25

360.00 450.00 900.00 1,125.00 1,350.00 1,800.00

13.80

552.00 1,104.00 1,380.00 1,656.00 2,208.00

16.35

654.00 1,308.00 1,635.00 1,962.00 2,616.00

21.45

858.00 1,716.00 2,145.00 3,432.00

• Desempeño y confiabilidad “Extreme Duty™”

26.55

4,248.00

31.60

• Gama completa de renta de máquinas de soldar

5,056.00

41.80

6,688.00

Representates exclusivos en Puerto Rico de

• Costo efectivo • Soluciones innovadoras Somos los Representantes Exclusivos de la Mejor Soldadura a Nivel Mundial

276

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


GALVANIZED AND ELECTROGALVANIZED SHEETS

STRUCTURAL STEEL DIVISION

GALVANIZED AND ELECTROGALVANIZED SHEETS

GALVANIZED SHEET & COIL Electro-galvanized conforms to ASTM A-591. Regardless of coating weight, spangle size, method of manufacture or surface preparation required SLP can supply the material needed. GALVANIZED SHEETS are continuosly hot dip coated with a durable protective coating of zinc. Can be formed without flaking or peeling. Stamping, cold drawing, double seaming and brake or roll forming will not impair their protective qualities. Can be welded and soldered. Coatings are G90 (minimum .90 oz. per foot). HOT DIPPED GALVANIZED is also available on special order in extra heavy coatings, differentially coated. GALVALUME is a corrosion resistant sheet, continuosly hot dipped coated with an aluminum zinc alloy. For certain applications it offers a substantial increase in corrosion resistance over G90 galvanized sheet. It can be readily formed, welded and soldered. End uses: appliance and automotive parts, metal buildings and agricultural parts. Conforms to ASTM A-792 AZ 50 coating.

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com

277

© 2010 STEEL AND PIPES, INC.

ELECTRO-GALVANIZED sheets are cold rolled steel sheets zinc coated by electrolytic deposition and conform to A-591. Should be painted if subject to outdoor exposure. The coating has a uniform dull gray matte appearance without the spangles normally present on hot dipped galvanized. The surface has been phosphate treated for immediate paintability. Can also be formed, rolled or stamped without flaking, powdering, peeling or cracking. Electrogalvanized sheets have same gauge thickness as cold rolled sheets. Particularly suited for cabinets, signs, light fixtures, etc., where an excellent finish is required.


STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.

SHEET TOLERANCE

278

EXPANDED METAL

Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com


STRUCTURAL STEEL DIVISION

GRATING & FLOORING PRODUCTS

ROUND PIPES

Steel and Pipes, Inc