Page 1

What to do when your Central Air Conditioner stops working totally

In the event that your central air conditioning system won’t go on consequently when the indoor regulator flags the requirement for cooling. Here are some tips of what to do when you ’ re your central air conditioner stops working totally and if required contact an air conditioning service Melbourne. 1.

Check the principle electrical board and any auxiliary circuit boards for a stumbled breaker or blown wire. On the off chance that you discover the issue there, reset the breaker by turning it off and after that on or supplant the wire. A central heating and cooling system commonly associates with a committed 240-volt circuit. In the event that the breaker keeps on tripping every now and then, suspect a short in the framework —in the compressor, capacitor, or the fan engine. Contract a circuit repairman to find and take care of this issue.

www.staycool.com.au


2.

Make beyond any doubt the indoor regulator is set to COOL and its temperature setting is no less than 3 degrees underneath the encompassing room temperature.

3.

Make beyond any doubt the power is on. Check the switch in the heater or air handler, and the open air condenser. Additionally ensure nobody has stopped the compressor’s 240-volt detach, regularly in a metal box mounted close to the compressor.

4.

Remove the indoor regulator’s cover after killing the ability to the aeration and cooling system. Expel the indoor regulator ’ s body from the base (more often than not by hauling straight out) and supplant the batteries (on the off chance that it has batteries). Ensure all wires safely append to their terminals and that the cover won ’ t squeeze them. Supplant the cover and hold up 3 or 4 minutes, and after that attempt the framework once more.

5.

If that doesn’t carry out the activity, open the indoor regulator and unscrew the wire from the Y terminal. Play Judas on. Holding the wire by its protection just, touch the exposed end to the R terminal and hold it there for around two minutes. On the off chance that the compressor kicks on, the indoor regulator is defective. If the compressor doesn’t go on when you hold the Y wire to the R terminal, kill the power back and either call a air conditioner specialist or check the capacitor.

6.

Finally, check the compressor’s capacitor and wires. The capacitor in the compressor begins both the condenser and the fan. In the event that the capacitor has fizzled, the A/C unit won’t run. It’s anything but difficult to test whether it works and it is modest and simple to settle in the event that it doesn’t.

www.staycool.com.au


Contact Details: Business Name: Staycool Heating and Air Conditioning Website: www.staycool.com.au Email: sales@staycool.com.au Phone : 03 9703 2500 Address : Factory 1/84 Hallam South Road Hallam VIC 3803

www.staycool.com.au

What to do when your central air conditioner stops working totally  

Staycool Heating & Air Conditioning is known for installing quality air conditioning systems in the industry. For more detailed call us toda...

What to do when your central air conditioner stops working totally  

Staycool Heating & Air Conditioning is known for installing quality air conditioning systems in the industry. For more detailed call us toda...

Advertisement