Issuu on Google+

Products 2010/2011

e.control™– product catalogue 2010/2011

Energy efficiency

Room automation


software

 ALEX Commissioning software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  ALEX Designer Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  IPLONGATE OPC Data server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  LPA Protocol analyser and LSD system diagnosic tool . . . . . . . . . . . . . . . . . . . . . . 39

infrastructure

   

panels

      

r series

        

m series

   

fastcon

 LON FastCon Lighting actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  LON FastCon Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  LON Fire and smoke damper modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

weather

 LON Compact weather sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  LON Weather station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

controller

e.control products

e.controlTM Products

 LON Sun tracking controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  LON Application controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

LON Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Power supplies and terminators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 LON Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 LON Internet servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 LON Touch panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 LON Room control panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 LON Room climate controllers for static heating and cooling . . . . . . . . . . . . . . . . . . . 48 LON Room climate controllers for fan coil units . . . . . . . . . . . . . . . . . . . . . . . . . 49 Wireless room control devices and sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 LON Radio receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 LON Multisensors and occupancy sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 LON Lighting actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 LON DALI Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 LON Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 LON SMI Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 LON Digital outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 LON Analogue inputs/outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 LON MP-Bus Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 LON Digital inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 LON Combined actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 LON M series Distribution boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 LON M series Lighting modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 LON M series Sunblind modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 LON M series Analogue and digital I/O modules . . . . . . . . . . . . . . . . . . . . . . . . . 70

37


e.control products

software

ALEX Commissioning and management software Figure

Specification

Technical data

Order No.

ALEX 4.0 Commissioning software

Consisting of:  ALEX 4.0  LNS TE/FX server  64 device credits*

090 032

 Professional software for system design and commissioning of LON networks  Software runs as local LNS client or as lightweight or fullweight client for remote network access, thus multiple ALEX can access the same LON network concurrently  Integrated browser for monitoring and modifying network variables and configuration properties

System requirements:  Windows 7, XP, 2000  USB port for license dongle  LON network interface for LON TP/XF1250 or TP/FT-10 segment (p. 40)  LAN port (10/100 Base-T) for LON/IP or remote access to LNS-Server

 Includes device manager for fast collecting, downloading and managing large numbers of LON devices concurrently  Includes product database for device and application management  Auto-backup automatically saves opened project database in background  Includes LNS TE/FX server licence and 64 device credits*  Available Languages: English and German

ALEX Designer Suite Graphical commissioning and management software  Graphical software tool for network design and commissioning of e.control automation systems  Integrated function library automatically binds and parameterises all e.control automation devices  Room layout and functionality can be changed graphically  Enables device management on mouse-click: test, reset, online, offline, download etc.

Consisting of:  ALEX 4.0  e.control Designer  e.control Manager Active X comp.  LNS TE/FX server  64 device credits*

092 032

System requirements:  Windows 7, XP, 2000  USB port for license dongle  LON network interface for LON TP/XF1250 or TP/FT-10 segment (p. 40)  LAN port (10/100 Base-T) for LON/IP or remote access to LNS-Server

 Software runs as local LNS client or as lightweight or fullweight client for remote network access  e.control Manager Active X component grants remote access from SCADA systems or Internet Explorer  Includes ALEX 4.0 software  Includes LNS TE/FX server licence and 64 device credits  Available languages: English and German * By the use of ALEX or Designer Suite further LNS device credits may be charged.

38

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


software

e.control products

OPC Data server, network diagnostics and analysis Figure

Specification

Technical data

Order No.

IPLONGATE OPC Data server

IPLONGATE open IPLONGATE 150** IPLONGATE 600**

094 031 094 041 094 051

 High performance data server for connecting LON networks to supervisory control and data acquisition (SCADA) or building management systems (BMS)  Connects to LNS server locally or as lightweight client over TCP/IP networks  OPC® server compliance tested  Integrated web server  Up to 20 LNS databases, 3,000 LON devices and 11,900 network variables manageable per IPLONGATE  Supports network variables, configuration properties and monitor sets

Consisting of:  IPLONGATE OPC server  LNS TE/FX server System requirements:  Windows 7, Vista, XP, 2000  USB port for license dongle  LON network interface for LON TP/XF1250 or TP/FT-10 segment (p. 40)  LAN port (10/100 Base-T) for LON/IP or remote access to LNS-Server

 Fast project planning and administration due to full LNS integration  Including LNS TE/FX server licence*  Languages: English and German

* Also available without LNS server on request. ** Such as IPLONGATE open, but limited to 150 respectively 600 LON network variables (can be upgraded)

LPA Protocol analyser

LPA-SW for TP/XF u. TP/FT LPA-IP for LON/IP

 Logging of all network telegrams in LON TP/XF1250 and TP/FT-10 respectively in LON/IP networks

System requirements:  Windows 7, Vista, XP, 2000  LPA-SW: NIC interface (p. 40)  LPA-IP: LAN port (10/100 Base-T)

 Works together with all NIC network interfaces, even concurrently to ALEX or IPLONGATE

LPA-SW LPA-IP

 Allows longtime logging  Network adresses and variables will be interpreted automatically according to LNS database names LSD Network diagnosic tool  Collects and shows statistical information of LON networks during operation

System requirements:  Windows 7, Vista, XP, 2000  NIC interface (p. 40) or  L-Switch, L-IP (pp. 42)

LSD-SW

 Works together with all NIC network interfaces, even concurrently to ALEX or IPLONGATE  Diagnostics of complete networks through L-Switch or L-IP routers  Supports teleconfiguration, firmware upload of L-Switch or L-IP routers

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

39


e.control products

infrastructure

LON Interfaces Figure

Specification

Technical data

Order No.

NIC709-PCI LON Interface card for PCI bus

Network: TP/FT-10 (78kbps) or TP/XF-1250 (1,25Mbps)

NIC709-PCI

 PC interface connecting to LON networks via TP/FT-10 or TP/XF-1250 segments  Compatible with LNS applications in high-performance LNS/VNI access mode

Power supply: via PCI bus (<250mA) Metrics: (HxWxD) 135 x 96 x 20mm

 Simultaneous operation of LNS applications and LPA or LSD tools  Software driver for Windows 7, Vista, XP and 2000 NIC709-USB100 LON Interface for USB  USB interface connecting to LON networks via TP/FT-10 or TP/XF-1250 segments

Network: TP/FT-10 (78kbps) or TP/XF-1250 (1,25Mbps)

NIC709-USB

USB port: full speed USB 1.1

 Compatible with LNS applications in high-performance LNS/VNI access mode

Power supply: via USB port (5V, <130mA)

 Simultaneous operation of LNS applications and LPA or LSD tools

Metrics: (HxWxD) 23 x 69 x 116mm

 Software driver for Windows 7, Vista, XP and 2000 NIC709-IP3E100 LON Interface for Ethernet

Network: TP/FT-10 (78kbps)

 LAN interface connecting to LON networks via TP/FT-10 segments

Ethernet port: 10 Base-T

 Compatible with LNS applications in high-performance LNS/VNI access mode  Simultaneous operation of LNS applications and LPA or LSD tools  Software driver for Windows 7, Vista, XP and 2000

NIC709-IP1E100 LON Interface for Ethernet

Network: TP/XF-1250 (1,25Mbps)

 LAN interface connecting to LON networks via TP/XF1250 segments

Ethernet port: 10 Base-T

 Simultaneous operation of LNS applications and LPA or LSD tools  Software driver for Windows 7, Vista, XP and 2000

40

Power supply: 9-35VDC, 12-24VAC 50/60Hz max. 200mA@24V Metrics/mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

 Compatible with LNS applications in high-performance LNS/VNI access mode

NIC709-IP3E

NIC709-IP1E

Power supply: 9-35VDC, 12-24VAC 50/60Hz max. 200mA@24V Metrics/mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


infrastructure

e.control products

Power supplies and terminators Figure

Specification

Technical data

Order No.

sistema SV15 Power supply 24V DC

Voltage: primary 120-230V AC, 50/60Hz secondary 24V DC

100 150

 Regulated and stabilised power supply for LON devices with 24VDC operating voltage  Rated output current: 1.3A  Short-circuit and overload proof  High efficiency

Power: 30 W (1.3A secondary) Metrics/mounting: (HxWxD) 90 x 54 x 55mm DIN rail mounting

 Connectable in parallel

sistema SV25 Power supply 24V DC  Regulated and stabilised power supply for LON devices with 24VDC operating voltage  Rated output current: 2.5A  Short-circuit and overload proof  High efficiency

Voltage: primary 120-230V AC, 50/60Hz secondary 24V DC

100 250

Power: 60 W (2.5A secondary) Metrics/mounting: (HxWxD) 90 x 72 x 55mm DIN rail mounting

 Connectable in parallel

sistema LT-33/LT-13 / LT-03 LON Terminators  Bus termination for TP/FT-10 segments (free topology or line topology) or TP/XF-1250 segments (line topology)  Includes 2 termination elements  LT-03 equipped with RJ45 jack for connecting to NIC interfaces

sistema T10-UP LON Terminators  Bus termination for TP/FT-10 segments in free topology or line topology for flush mounting  Connecting directly on clamp of flush devices

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

Versions: LT-33 for 2 TP/FT-10 segments in free or line topology LT-13 for 1 TP/XF1250 and 1 TP/FT-10 in free or line topology LT-03 for 1 TP/FT-10 segment in free or line topology, RJ45 jack

100 033 100 013 100 003

Metrics/mounting: (HxWxD) 85(45) x 17 x 60mm DIN rail mounting

Versions: T10F-UP for TP/FT-10 free topology T10L-UP for TP/FT-10 line topology

200 010 200 011

Metrics/mounting: (HxWxD) 25 x 15 x 35mm Mounting in flush mounting sockets

41


e.control products

infrastructure

LON/IP Routers and proxy Figure

Specification

Technical data

Order No.

L-IP 3ECTB / L-IP 1ECTB LON/IP Router

Versions: L-IP 3ECTB 10/100 Base T + TP/FT-10 L-IP 1ECTB 10/100 Base T + TP/XF1250

LIP-3ECTB LIP-1ECTB

 Routes packets between TP/FT-10 respectively TP/XF1250 segment and IP networks  Preferably used as LON/IP backbone router  Build-in web server for admin. and EIA-852 configuration server  Firmware update and network diagnostics via LSD tool  Protocol analysis via LPA-IP tool L-IP 33ECTB LON/IP 2 port router  Routes packets between two TP/ FT-10 segments and IP networks  Preferably used as LON/IP backbone router  Build-in web server for admin. and EIA-852 configuration server  Firmware update and network diagnostics via LSD tool  Protocol analysis via LPA-IP tool

L-IP 3333ECTB LON/IP 4 port router  Routes packets between four TP/ FT-10 segments and IP networks  Preferably used as LON/IP backbone router  Build-in web server for admin. and EIA-852 configuration server  Firmware update and network diagnostics via LSD tool  Protocol analysis via LPA-IP tool

L-PROXY LON Gateway  Gateway for transmitting telegrams between 3 LON/IP and 2 TP/FT-10 segments  Provides data interchange across domain boundaries and different LNS databases  Proxy functionality by mapping input NV’s to output NV’s (e.g. to overcome alias limitations)

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V Termination: for TP/FT or TP/XF segment (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

Network: Port 1 10/100 Base-T (Ethernet) Port 2+3 TP/FT-10

LIP-33ECTB

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

Network: Port 1 10/100 Base-T (Ethernet) Port 2-5 TP/FT-10

LIP-3333ECTB

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 157 x 60mm DIN rail mounting

Network: Port 1 10/100 Base-T (LON/IP) Port 2-3 TP/FT-10 (LON/TP)

LP-33E100

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

 Configurable via LNS plug-in

42

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


e.control products

infrastructure

LON Routers Figure

Specification

Technical data

RT-33 LON Repeater

Network: Port 1-2:

 Signal amplifier connecting two TP/FT-10 segments

Power supply: 24V DC, max. 20mA (typ. 10mA)

 Separate clamps for power supply and for electromagnetic shielding  Connection via coloured bus clamps

LS-33 CB / LS-13 CB LON 2 port router  Routes packets between two physically separated TP/FT or TP/ XF1250 segments  Configurable as self-learning switch (plug&play) or configured router  Service pin and diagnostic LED

Order No. TP/FT-10

Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 85(45) x 52,5 x 60mm DIN rail mounting

Versions: LS-33 C 2 TP/FT-10 LS-13 C 1 TP/XF1250, 1 TP/FT-10

Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

LS-333 C / LS-133 C LON 3 port router

Versions: LS-333 C 3 TP/FT-10 LS-133 C 1 TP/XF1250, 2 TP/FT-10

 Configurable as self-learning switch (plug&play) or configured router  Service pin and diagnostic LED

Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 157 x 60mm DIN rail mounting

LS-13333 C LON 5 port router

Network: Port 1 TP/XF1250 Port 2-5 TP/FT-10

 Configurable as self-learning switch (plug&play) or configured router  Preferably used as TP/FX1250 backbone router  Service pin and diagnostic LED  Firmware update and network diagnostics via LSD tool

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

LS-333CB LS-133CB

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V

 Firmware update and network diagnostics via LSD tool

 Routes packets between four physically separated TP/FT segments and one TP/XF1250 segment

LS-33CB LS-13CB

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V

 Firmware update and network diagnostics via LSD tool

 Routes packets between three physically separated TP/FT or TP/ XF1250 segments

RT-33

LS-13333CB

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V Termination: separately for TP/FT segments (p. 41) Metrics/Mounting: (HxWxD) 90(45) x 157 x 60mm DIN rail mounting

43


e.control products

infrastructure

LON Internet servers Figure

Specification

Technical data

Order No.

dialog Web Intranet web server

Server incl. Web license for 15 rooms Web license (per additional room) Add-on license (per IP phone)

443 150 C 093 101 093 141

 Server for controlling all room automation functions via standard web browser or IP phones (optional)  Static interface for max. 150 rooms, multiple servers can be clustered for unlimited numbers of rooms with shared configuration  Separated building management IP network and user IP network via 2 Ethernet ports  User administration and access rights management via web interface

Network: Port 1 10/100 Base-T (LON/IP) Port 2 10/100 Base T (TCP/IP LAN) Power supply: 10-32V DC, max. 7.5 W Metrics/Mounting: (HxWxD) 27 x 165 x 110mm DIN rail mounting or 19“ rack mounting (1U, see p. 77)

 User-independent licensing per room, configurable via LNS plug-in

L-GATE BACnet server  Server for presenting LON network variables as BACnet server objects  Supports static and dynamic LON network variables plus configuration properties  Supports BACnet client mapping and alarming, scheduling and trend logging BACnet objects  Configurable via LNS plug-in

L-INX OPC XML/DA server  Server for presenting LON network variables and configuration properties via OPC XML/DA web services  Supports static and dynamic LON network variables plus configuration properties  Supports alarming, scheduling and trend logging  Integrated web server for custommade visualisation  Configurable via LNS plug-in

44

Network: Port 1 10/100 Base-T (BACnet/IP, LON/IP) Port 2 TP/FT-10 (LON) Port 3 MS/TP (BACnet)

LGATE-900

Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 4.8 W Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

Versions: L-INX 100 with RNI remote interface L-INX 101 with LON/IP router

LINX-100 LINX-101

Network: Port 1 10/100 Base-T (OPC, LON/IP) Port 2 TP/FT-10 (LON) Power supply: 9-35V DC, 12-24V AC 50/60Hz max. 4.8 W Metrics/Mounting: (HxWxD) 90(45) x 104 x 60mm DIN rail mounting

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


control panels

e.control products

LON Touch panels Figure

Specification

Technical data

Order No.

dialog T5 LON Touch panel 5“

Model aluminium anodised Mounting frame

341 511 A 940 005

 Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.

Network: Port 1 10/100 Base-T (Ethernet) Port 2 TP/FT-10 (LON)

 Front made of anodised aluminium

Power supply: 24V AC/DC, max. 330mA (8 W)

 Supports static and dynamic LON network variables (max. 1,000) plus configuration properties  Supports local or remote alarming, scheduling and local trend logging  Integrated VNC server for remote destop access via IP network

Equipment: - Display 320 x 240 pixel, 256 colors - Backlight - Touch-sensitive display - Integrated RNI remote interface

 Configurable via LNS plug-in in WYSIWYG design

Metrics/Mounting: (HxWxD) 165 x 210 x 60mm Mounting frame available separately

dialog T12 LON Touch panel 12“

Model aluminium anodised Mounting frame

 Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.

Network: Port 1+2 10/100 Base-T (Ethernet) Port 3 TP/FT-10 (LON)

 Front made of anodised aluminium

Power supply: 24V DC, max. 550mA (13 W) or 90 - 230V AC

 Supports static and dynamic LON network variables (max. 1,000) plus configuration properties  Supports local or remote alarming, scheduling and local trend logging  Integrated VNC server for remote destop access via IP network  Configurable via LNS plug-in in WYSIWYG design

Equipment: - Display 800 x 600 pixel, 65,535 colors - Dimmable backlight - Touch-sensitive display - 200 MB internal flash memory - Integrated RNI remote interface Metrics/Mounting: (HxWxD) 268 x 329 x 65mm Mounting frame available separately

dialog T15 LON Touch panel 15“

Model aluminium anodised Mounting frame

 Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.

Network: Port 1+2 10/100 Base-T (Ethernet) Port 3 TP/FT-10 (LON)

 Front made of anodised aluminium

Power supply: 24V DC, max. 660mA (16 W) or 90 - 230V AC

 Supports static and dynamic LON network variables (max. 1,000) plus configuration properties  Supports local or remote alarming, scheduling and local trend logging  Integrated VNC server for remote destop access via IP network  Configurable via LNS plug-in in WYSIWYG design

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

341 512 A 940 012

341 515 A 940 015

Equipment: - Display 1024 x 768 pixel, 65,535 colors - Dimmable backlight - Touch-sensitive display - 200 MB internal flash memory - Integrated RNI remote interface Metrics/Mounting: (HxWxD) 318 x 394 x 65mm Mounting frame available separately

45


e.control products

control panels

LON Room control panels

Scale approx. 1:3

Figure

Specification

Technical data

Order No.

dialog 1 Integrated LON room control panel

Model:

341 501 W 341 501 B 341 501 A

aluminium / white anthracite / black aluminium / black

 Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.

Network: TP/FT-10

 White backlit display with 4x16 characters, 3 LEDs and buzzer

Power supply: 24V DC, max. 80mA

 Front and push and turn knob made of anodised aluminium

Equipment: - Display 4x16 characters, backlit - Control via push and turn knob - realtime clock, battery backed - Buzzer, 3 LEDs (red, yellow, green)

 Integrated temperature sensor  Internal real time clock and scheduler with 24 switching points for energy level  Free configurable menu for lighting, sunblind and window controls, setpoint adjustment, energy level and fan speed. Intuitive operation via log on-/log-off, favourites and scenes  With functional object for displaying text messages e.g. from SCADA systems on the display

(FTT10)

Metrics/Mounting: (HxWxD) 125 x 125 x 40mm incl. box for cavity wall or flush mounting Available Applications: SC341501CM f. external temp. controller SC341501EC f. radiator, chilled ceiling, fan coil or VAV

Scale approx. 1:3

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

dialog 8 LON LCD Room control panel  Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.  Backlit display for temperatures, time, date and controller states  Available in 3 colours with 8 or 12 buttons, optional plastic, glass or stainless steel frames  Integrated temperature sensor  Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

Model: 8 buttons, pure white 8 buttons, anthracite 8 buttons, aluminium 12 buttons, pure white 12 buttons, anthracite 12 buttons, aluminium

341 508 W8 341 508 B8 341 508 A8 341 508 W12 341 508 B12 341 508 A12

Frame (optional): Plastic pure white Plastic anthracite Plastic aluminium Stainless steel Glass

940 102 W 940 102 B 940 102 A 940 101 940 100

Network: TP/FT-10 (FTT10) Power supply: 24V AC/DC, max. 65mA Metrics/Mounting: (HxWxD) 154 x 83 x 45mm in cavity wall or flush mounting sockets Available Applications: SC341508CM f. external temp. controller SC341508EC f. radiator, chilled ceiling, fan coil or VAV

46

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


control panels

Scale approx. 1:3

Figure

Specification

Technical data

Order No.

clima LCD LON LCD Room control panel with 4 digital inputs

Model:

231 505 W 231 505 B 231 505 A

 Control panel with temperature sensor, LCD and 4 buttons for setpoint or fan speed adjustment and presence

Network: TP/FT-10 (FTT10)

 4 inputs for floating contacts, e.g. light or sunblind switches, window contacts or presence button  Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

Example of use: frame and switches not included

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232) clima RCM LON Room control panel with 4 digital inputs  Control panel with temperature sensor, setpoint adjuster and max. 2 buttons incl. LEDs for controller states and fan speed  4 inputs for floating contacts, e.g. light or sunblind switches, window contacts or presence button  Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

Example of use: frame and switches not included

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

pure white anthracite aluminium

Power supply: 24V AC/DC, max. 65mA Metrics/Mounting: (HxWxD) 71 x 71 x 49mm in cavity wall or flush mounting sockets Available Applications: SC231505CM f. external temp. controller SC231505EC f. radiator, chilled ceiling fan coil or VAV

w/o buttons

pure white anthracite aluminium presence pure white anthracite aluminium fan speed pure white anthracite aluminium presence/fan pure white anthracite aluminium

Metrics/Mounting: (HxWxD) 70 x 70 x 41mm Available Applications: SC231302CM and SC231302EC as above Model:

 Continuous-action controller with temperature sensor and 2 LEDs for energy level and heating or cooling activity

Network: TP/FT-10 (FTT10)

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc  Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

231 302 W 231 302 B 231 302 A 231 303 W 231 303 B 231 303 A 231 304 W 231 304 B 231 304 A 231 305 W 231 305 B 231 305 A

Network / Power supply: TP/FT-10 (FTT10) 24V AC/DC, max. 60mA

clima RO LON Climate controller for public buildings with 4 digital inputs

 4 inputs for floating contacts, e.g. light or sunblind switches, window contacts or occupancy sensors

Example of use: frame and switches not included

e.control products

pure white anthracite aluminium

231 301 W 231 301 B 231 301 A

Power supply: 24V AC/DC, max. 60mA Metrics/Mounting: (HxWxD) 70 x 70 x 49mm in cavity wall or flush mounting sockets Available Applications: SC231301CM f. external temp. controller SC231301EC f. radiator, chilled ceiling fan coil or VAV

47


e.control products

control panels

LON Room climate controllers for static heating and cooling

Scale approx. 1:3

Figure

Specification

Technical data

Order No.

clima LCD-CC LON LCD Room climate controller with 2 DI / 2 AO 0-10V

Model:

231 544 W 231 544 B 231 544 A

 Control panel with temperature sensor, LCD and 4 buttons for setpoint or fan speed adjustment and presence

Network: TP/FT-10 (FTT10)

 2 analogue outputs for actuators and 2 inputs for floating contacts, e.g. windows or occupancy sensors  Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

Example of use: frame not included

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

clima RCM-CC LON Room climate controller with 6 DI / 2 AO 0-10V  Control panel with temperature sensor, setpoint adjuster and presence button (optional)  2 analogue outputs for actuators and 2 inputs for window contacts or occupancy sensors  4 inputs for floating contacts, e.g. light or sunblind switches  Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

Example of use: frame not included

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

48

Power supply: 24V AC/DC, max. 65mA Outputs: 0-10V, max. 5 mA each Metrics/Mounting: (HxWxD) 71 x 71 x 49mm in cavity wall or flush mounting sockets Available Application: SC231544CC for radiators, chilled ceilings or VAV

w/o Buttons Presence

pure white anthracite aluminium pure white anthracite aluminium

Power supply: 24V AC/DC, max. 60mA Outputs: 0-10V, max. 5 mA each Metrics/Mounting: (HxWxD) 71 x 71 x 41mm in cavity wall or flush mounting sockets Available Application: SC231342CC for radiators, chilled ceilings or VAV Model:

 Same as clima RCM-CC but without setpoint adjuster or presence button

Network: TP/FT-10 (FTT10)

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

231 342 W 231 342 B 231 342 A 231 343 W 231 343 B 231 343 A

Network: TP/FT-10 (FTT10)

clima RO-CC LON Climate controller for public buildings with 6 DI / 2 AO 0-10V

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc Example of use: frame not included

pure white anthracite aluminium

pure white anthracite aluminium

231 341 W 231 341 B 231 341 A

Power supply / outputs: 24V AC/DC, max. 60mA 0-10V, max. 5 mA each Metrics/Mounting: (HxWxD) 71 x 71 x 49mm in cavity wall or flush mounting sockets Available Application: SC231341CC for radiators, chilled ceilings or VAV

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


control panels

e.control products

LON Room climate controllers for fan coil units

Scale approx. 1:3

Figure

Specification

Technical data

Order No.

clima RCM-FC LON Room climate controller with 6 DI and FCB connector

Fan button

231 334 W 231 334 B 231 334 A 231 335 W 231 335 B 231 335 A

 Control panel with temperature sensor, setpoint and fan speed adjuster and presence button (optional)  Integrated control of max. 2 fan coils with clima FCB boxes (see below) via 3-wire cable  6 inputs for floating contacts, e.g. light or sunblind switches, sensors

Network: TP/FT-10 (FTT10) Power supply: 24V AC/DC, max. 60mA Metrics/Mounting: (HxWxD) 71 x 71 x 41mm, in cavity wall or flush mounting sockets Available Application: SC231334FC for fan coil units

Example of use: frame not included

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

Scale approx. 1:3

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

P. + F. button

pure white anthracite aluminium pure white anthracite aluminium

clima RO-FC LON Climate controller for public buildings with 6 DI and FCB conn.

Model:

 Same as clima RCM-FC but without setpoint adjuster or buttons

Network: TP/FT-10 (FTT10)

 Integrated control of max. 2 fan coils with clima FCB boxes (see below) via 3-wire cable

Power supply: 24V AC/DC, max. 60mA

 6 inputs for floating contacts, e.g. light or sunblind switches, sensors  Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc Example of use: frame not included

pure white anthracite aluminium

231 331 W 231 331 B 231 331 A

Metrics/Mounting: (HxWxD) 71 x 71 x 49mm in cavity wall or flush mounting sockets Available Application: SC231331FC for fan coil units

 Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)

clima FCB Fan coil box for controlling a fan coil unit  Junction box for three-stage fan and 2 thermoelectric or continous actuators (0-10V)  6 inputs for floating contacts  Connectable to clima RCM-FC or clima RO-FC via 3-wire cable. Max. 2 fan coil boxes can be operated in parallel

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

Versions: clima FCB-24 2 x 24V AC/DC + fan clima FCB-230 2 x 230V triac + fan clima FCB-10V 2 x 0-10V + fan

410 302 410 322 410 342

Power supply: 24V AC/DC: via 3 wire bus 230V AC: separate feed line Metrics/Mounting: (HxWxD) 85 x 130 x 38mm mounting on fan housing, IP 54

49


e.control products

control panels

Wireless room control devices

Scale approx. 1:3

Figure

Specification

Technical data

Order No.

dialog RC-T Wireless room temperature sensor

Model:

442 510 W 442 510 B 442 510 A

 Sensor for periodic transmission of room temperature (0...40°C)  Compatible with receivers dialog RC-E and lumina MS/RC (p. 51)  Adhesive or screw mounting on plane surfaces

Frame not included

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

dialog RC-TS Wireless room control device  Same as dialog RC-T but with additional local setpoint adjuster  Compatible with receivers dialog RC-E and lumina MS/RC (p. 51  Adhesive or screw mounting on plane surfaces

Frame not included

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

dialog RC-L1 / dialog RC-J1 Wireless switch 1-gang  Sensor transmits push events for one group of lights or sunblinds  Compatible with receivers dialog RC-E and lumina MS/RC (p. 51  Adhesive or screw mounting on plane surfaces

Frame not included

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

Scale approx. 1:3

dialog RC-L2 / dialog RC-J2 Wireless switch 2-gang  Sensor transmits push events for two groups of lights or sunblinds  Compatible with receivers dialog RC-E and lumina MS/RC (p. 51  Adhesive or screw mounting on plane surfaces

Frame not included

50

 Available in 3 colours, suitable for - Berker S1, B1, B3, B7 glass - Gira E2, Event, Esprit - Jung A 500, A plus, A creation - Merten M-Plan, M-Star, M-Arc

pure white anthracite aluminium

Radio frequency/technology: 868.3 MHz (EnOcean) Range: max. 30m inside Power supply: photovoltaic (>200lx@3h), battery-free Metrics/mounting: (HxWxD) 71 x 71 x 25mm adhere or screw on all plane surfaces Model:

pure white anthracite aluminium

442 511 W 442 511 B 442 511 A

Radio frequency/technology: 868.3 MHz (EnOcean) Range: max. 30m inside Power supply: photovoltaic (>200lx@3h), battery-free Metrics/mounting: (HxWxD) 71 x 71 x 25mm adhere or screw on all plane surfaces RC-L1 ( 0 / I )

pure white anthracite aluminium RC-J1 (▲/▼) pure white anthracite aluminium RC-N1 neutral pure white anthracite aluminium

442 501 W 442 501 B 442 501 A 442 505 W 442 505 B 442 505 A 442 503 W 442 503 B 442 503 A

Radio frequency/technology/range: 868.3 MHz (EnOcean), battery-free, electrodynamic, max. 30m inside Metrics: (HxWxD) 71 x 71 x 15mm RC-L2 ( 0 / I )

pure white anthracite aluminium RC-J2 (▲/▼) pure white anthracite aluminium RC-N2 neutral pure white anthracite aluminium

442 502 W 442 502 B 442 502 A 442 506 W 442 506 B 442 506 A 442 507 W 442 507 B 442 507 A

Radio frequency/technology/range: 868.3 MHz (EnOcean), battery-free, electrodynamic, max. 30m inside Metrics: (HxWxD) 71 x 71 x 15mm

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


control panels

e.control products

LON Radio receivers Figure

Specification

Technical data

Order No.

dialog RC-E LON Radio receiver

Network: TP/FT-10 (FTT10)

441 301 C

 Radio receiver for converting radio telegrams to LON messages via LonMark objects

Radio frequency/technology: 868.3 MHz (EnOcean)

 16 wireless switches or sensors assignable

Power supply: 24V AC/DC, max. 30mA

 Application supports following VDI 3813 functions: temperature measurement, window monitoring, occupancy setting, light setting, sunblind setting, scene setting, setpoint setting

Metrics/mounting: (HxWxD) 120 x 80 x 42mm, on-wall mounting

lumina MS/RC-EB LON Multisensor w. radio receiver

Model:

 Combination of occupancy sensor, light sensor and radio receiver

Network / power supply: TP/FT-10 (FTT10) 24V AC/DC, max. 55mA

 Incorporates all controllers for integrated e.control room automation concept  Application supports occpuancy control, constant light control, thermo control and all room climate control functions according to VDI 3813-2, conform to BAC Efficiency class A according to EN 15232

Available application: SC911303EC f. 16 switches/sensors

pure white aluminium

911 303 W 911 303 A

Radio frequency/technology: 868.3 MHz (EnOcean) Metrics(M) / fitting dimensions(F): (Ø x D) M: 79 x 66mm, F: 64 x 51mm Available applications: SC911303CM f. external temp. controller SC911303EC f. radiator, chilled ceiling, fan coil or VAV

lumina MS/RC-AP LON Multisensor w. radio receiver

Model:

 Same as above but for surfacemounting

Network / power supply: TP/FT-10 (FTT10) 24V AC/DC, max. 55mA

pure white aluminium

911 304 W 911 304 A

Radio frequency/technology: 868.3 MHz (EnOcean) Metrics: (Ø x D) 97 x 50mm Available applications: SC911303CM f. external temp. controller SC911303EC f. radiator, chilled ceiling, fan coil or VAV dialog RC-F Wireless window contact  Magnetic contact for monitoring window or door states  Adhesive or screw mounting on plane surfaces

Model:

pure white

412 901 W

Radio frequency/technology: 868.3 MHz (EnOcean) Range: max. 30m inside Power supply: photovoltaic (>200lx@3h), battery-free Metrics/mounting (HxWxD): Transmitter 110 x 19 x 15mm Magnet 15 x 10 x 37mm adhere or screw on window frame

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

51


e.control products

room sensors

LON Multisensors Figure

Specification

Technical data

Order No.

lumina MS3 mini LON Multisensor

Model:

911 105 W 911 105 A

 Combination of occupancy sensor, light sensor and infrared receiver for mounting in suspended ceilings or in luminaires

Network / power supply: TP/FT-10 (FTT10) 24V DC, max. 40mA

 Application includes occupancy control, constant light control of 1 or 2 groups and operation functions for lighting and sunblinds according to VDI 3813, conform to BAC Efficiency class A according to EN 15232

pure white aluminium

Optical detection (height 3m): sedentary Ø 5.0m walking Ø 10.0m Metrics: Sensor (Ø x D): 36 (23) x 40mm Housing (HxWxD): 22 x 120 x 22mm Available application: SC911103EC

lumina MS3-EB LON Multisensor

Model:

pure white aluminium

 Combination of occupancy sensor, light sensor and infrared receiver for mounting in suspended ceilings

Network / power supply: TP/FT-10 (FTT10) 24V AC/DC, max. 40mA

 Application includes occupancy control, constant light control of 1 or 2 groups and operation functions for lighting and sunblinds according to VDI 3813, conform to BAC Efficiency class A according to EN 15232

Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m

lumina MS3-AP LON Multisensor

Model:

 Same as above but for surfacemounting

Network / power supply: TP/FT-10 (FTT10) 24V AC/DC, max. 40mA

911 103 W 911 103 A

Metrics(M) / fitting dimensions(F): (Ø x D) M: 79 x 66mm, F: 64 x 51mm Available application: SC911103EC

pure white aluminium

911 104 W 911 104 A

Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m Metrics: (Ø x D) 97 x 50mm Available application: SC911103EC

lumina MS-FB Remote control for multisensors

Power supply: 3V battery

 Infrared remote control for multisensor lumina MS3 (see above) to control: - 5 lights or sunblinds - 5 scenes - 1 fan (3-speed) - log-on / log-off

Metrics: (HxWxD) 70 x 54 x 8mm

910 111

 Maximum range: 8m

52

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


room sensors

e.control products

DALI Multisensor and Occupancy sensors Figure

Specification

Technical data

Order No.

lumina MS-DAL * DALI Multisensor

Model:

910 165 W 910 165 A

 Combination of occupancy sensor and light sensor for mounting in suspended ceilings or in luminaires

Network: DALI Slave, < 2mA

 Suitable for operating with all e.control DALI controllers to pass sensor values to LON network  Max. 8 sensors per controller, counts as one DALI slave, no group address claimed DALI

pure white aluminium

Power supply: 230V AC Optical detection (height 3m): sedentary Ø 5.0m walking Ø 10.0m Metrics: Sensor (Ø x D): 36 (23) x 40mm Housing (HxWxD): 24 x 165 x 24mm

lumina PM-EB Occupancy sensor

Model:

 PIR occupancy sensor with high sensivity for suspended ceilings

Power supply: 24V AC/DC, max. 40mA

 Floating contacts for presence and lighting control, interconnectable with e.control binary input modules lumina T6 or lumina B8  Parameterisable via potentiometers or remote control (see below)

Terminals: - Presence: - Light:

pure white aluminium

910 101 W 910 101 A

floating cont., 24V, <1A floating cont., 24V, <1A

Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m Metrics(M) / fitting dimensions(F): (ØxD) M: 79 x 85mm, F: 64 x 70 mm

lumina PM-AP Occupancy sensor

Model:

 As above, for surface-mounting

Power supply: 24V AC/DC, max. 40mA Terminals: - Presence: - Light: - Slave input:

pure white aluminium

910 102 W 910 102 A

floating cont., 24V, <1A floating cont., 24V, <1A for additional sensors

Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m Metrics: (ØxD) 98x50mm lumina PM-FB Remote control for occupancy sensors  Infrared remote control for setting up hold time and luminance threshold

Power supply: 3V battery

910 110

Metrics: (HxWxD) 70 x 54 x 8mm

 Comfortable adjustment of all occupancy sensors with only one remote control

* Availability: see pricelist

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

53


e.control products

r series

LON Lighting actuators with relays Figure

4x

Specification

Technical data

Order No.

lumina RSA4 LON Switch actuator 4 ports, 16A

RSA4 RSA4-b

121 104 C 121 105 C

 Relay module for independent switching of 4 electric loads with separate feed-in for each output

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 100mA

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.

Metrics/mounting: (HxWxD) 85(45) x 88 x 60mm DIN rail mounting

 Stair lighting, switch-on/off delay and scene memory with 10 scenes per channel

8x

RSA8 RSA8-b

 Relay module for independent switching of 8 electric loads with separate feed-in for 2 outputs

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 180mA

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 2000W halogen lamps: 1700W fluorescent lamps: 1000W comp.

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

121 108 C 121 109 C

Available application: SC121108EC: 8 lamp actuators 3 lamp group ctrl.

RSA12 RSA12-b

 Relay module for independent switching of 12 electric loads with separate feed-in for each output

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 260mA

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.

Metrics/mounting: (HxWxD) 85(45) x 192 x 60mm DIN rail mounting

w/o hand operation with hand operation

121 112 C 121 113 C

Available application: SC121112EC: 12 lamp actuators 3 lamp group ctrl.

lumina RSA16 LON Switch actuator 16 ports, 10A

RSA16 RSA16-b

 Relay module for independent switching of 16 electric loads with separate feed-in for 2 outputs

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 340mA

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 2000W halogen lamps: 1700W fluorescent lamps: 1000W comp.

Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting

 Stair lighting, switch-on/off delay and scene memory with 10 scenes per channel

54

w/o hand operation with hand operation

lumina RSA12 LON Switch actuator 12 ports, 16A

 Stair lighting, switch-on/off delay and scene memory with 10 scenes per channel

16x

Available application: SC121104EC: 4 lamp actuators 3 lamp group ctrl.

lumina RSA8 LON Switch actuator 8 ports, 10A

 Stair lighting, switch-on/off delay and scene memory with 10 scenes per channel

12x

w/o hand operation with hand operation

w/o hand operation with hand operation

121 116 C 121 117 C

Available application: SC121116EC: 16 lamp actuators 3 lamp group ctrl.

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


r series

e.control products

LON Lighting actuators with 1-10V and DALI Figure

4x 1-10V

8x 1-10V

Specification

Technical data

Order No.

lumina RST4 LON Control output 1-10V, 4 ports

RST4 RST4-b

121 144 C 121 145 C

 Module for independent switching and dimming of 4 groups of electronic ballasts with 1-10V interface

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 100mA

 High current relay contacts (120A) for fluorescent lamps with max. 1000W (comp.) per channel

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

 Stair lighting, switch-on/off delay, variable dimming ramp and scene memory with 10 scenes per channel

Available application: SC121144EC: 4 lamp actuators 3 lamp group ctrl.

lumina RST8 LON Control output 1-10V, 8 ports

RST8 RST8-b

 Module for independent switching and dimming of 8 groups of electronic ballasts with 1-10V interface

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 180mA

 High current relay contacts (120A) for fluorescent lamps with max. 1000W (comp.) per channel

Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting

 Stair lighting, switch-on/off delay, variable dimming ramp and scene memory with 10 scenes per channel

Available application: SC121148EC: 8 lamp actuators 3 lamp group ctrl.

lumina RDAL8 LON DALI Controller 8 groups  Module for supplying and independent controlling of up to 64 DALI devices devided in up to 8 groups  Monitoring of lamp status  Manual switch on/off operation

8x DALI

 Commissioning via LNS plug-in or directly with notebook

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 125mA

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 125mA

 Commissioning via LNS plug-in or directly with notebook  Stair lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

121 168 C

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

lumina RDAL16 LON DALI Controller 16 groups

 Manual switch on/off operation

121 148 C 121 149 C

Load: Supply of max. 64 DALI devices, thereof max. 4 MS-DAL multisensors

Available application: SC121168EC: 8 lamp actuators 4 brightness /occup. 3 lamp group ctrl.

 Monitoring of lamp status

DALI

w/o hand operation with hand operation

 Stair lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes

 Module for supplying and independent controlling of up to 64 DALI devices devided in up to 16 groups

16x

w/o hand operation with hand operation

121 166 C

Load: Supply of max. 64 DALI devices, thereof max. 8 MS-DAL multisensors Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting Available application: SC121168EC: 16 lamp actuators 8 brightness /occup. 3 lamp group ctrl.

55


e.control products

r series

LON Universal dimmers Figure

Specification

Technical data

Order No.

lumina RDA2-UN LON Universal dimmer 2 x 570W

Network: TP/FT-10 (FTT10)

121 152 C

 2 port universal dimmer for incandiscent lamps, high-voltage halogen lamps or low-voltage halogen lamps with wound or electronic transformers

Power supply: 24V AC/DC, max. 20mA

 Automatic load detection and overload protection  Parallel operation of both ports to increase output power to 1140VA  Stair lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes

Load: 2 x 10... 570VA or 1 x 10...1140VA resistive, inductive or capacitive load with auto-detection Metrics/mounting: (HxWxD) 90 x 123 x 50mm DIN rail mounting Available application: SC121152EC: 2 lamp actuators 3 lamp group ctrl.

2x R,L,C

lumina RDA4-UN LON Universal dimmer 4 x 570W

Network: TP/FT-10 (FTT10)

 4 port universal dimmer for incandiscent lamps, high-voltage halogen lamps or low-voltage halogen lamps with wound or electronic transformers

Power supply: 24V AC/DC, max. 20mA

 Automatic load detection and overload protection  Parallel operation of 2 ports to increase output power to 1140VA  Stair lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes

121 154 C

Load: 4 x 10... 570VA or 2 x 10...1140VA resistive, inductive or capacitive load with auto-detection Metrics/mounting: (HxWxD) 90 x 210 x 50mm DIN rail mounting Available application: SC121154EC: 4 lamp actuators 3 lamp group ctrl.

4x R,L,C

56

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


r series

e.control products

LON Sunblind actuators Figure

Specification

Technical data

Order No.

ombra RBA2 LON Sunblind actuator 2 ports

RBA2 RBA2-b

121 202 C 121 203 C

 Relay module for 2 AC motors for sunblinds, shutters or windows

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 60mA

 Max. motor power 250W, interlocked contacts and separate feedin for each port 2x

~ M

 Appropriate to sun tracking and shading correction control  Parameterisable power-on and protection behaviour, scene memory for 10 positions including slat angle per channel

~ M

~ M

 Relay module for 4 AC motors for sunblinds, shutters or windows

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 100mA

 Appropriate to sun tracking and shading correction control  Parameterisable power-on and protection behaviour, scene memory for 10 positions including slat angle per channel

~ M

w/o hand operation with hand operation

Available application: SC121204EC: 4 sunblind actuators 3 sunbl. group ctrl.

RBA8 RBA8-b

 Relay module for 8 AC motors for sunblinds, shutters or windows

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 180mA

 Appropriate to sun tracking and shading correction control  Parameterisable power-on and protection behaviour, scene memory for 10 positions including slat angle per channel

w/o hand operation with hand operation

Available application: SC121208EC: 8 sunblind actuators 3 sunbl. group ctrl.

RBA12 RBA12-b

 Relay module for 12 AC motors for sunblinds, shutters or windows

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 260mA

 Parameterisable power-on and protection behaviour, scene memory for 10 positions including slat angle per channel

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

121 208 C 121 209 C

Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting

ombra RBA12 LON Sunblind actuator 12 ports

 Appropriate to sun tracking and shading correction control

121 204 C 121 205 C

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

ombra RBA8 LON Sunblind actuator 8 ports

 Max. motor power 250W, interlocked contacts and separate feedin for each port 12 x

Available application: SC121202EC: 2 sunblind actuators 3 sunbl. group ctrl.

RBA4 RBA4-b

 Max. motor power 250W, interlocked contacts and separate feedin for each port 8x

Metrics/mounting: (HxWxD) 85(45) x 88 x 60mm DIN rail mounting

ombra RBA4 LON Sunblind actuator 4 ports

 Max. motor power 250W, interlocked contacts and separate feedin for each port 4x

w/o hand operation with hand operation

w/o hand operation with hand operation

121 212 C 121 213 C

Metrics/mounting: (HxWxD) 85(45) x 245 x 60mm DIN rail mounting Available application: SC121212EC: 12 sunblind actuators 3 sunbl. group ctrl.

57


e.control products

r series

LON Sunblind actuators Figure

2x

~ M

Specification

Technical data

Order No.

ombra RBA2-3E LON Sunblind actuator 2 ports for AC motors with 3 limit switches

RBA2-3E RBA2-3E-b

121 232 C 121 233 C

 Relay module for 2 sunblind motors with 3 limit switches

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 60mA

 Max. motor power 250W, interlocked contacts and separate feedin for each port

Metrics/mounting: (HxWxD) 85(45) x 88 x 60mm DIN rail mounting

 Appropriate to sun tracking and shading correction control  Parameterisable power-on and protection behaviour as well as scene memory for each channel ombra RBA4-3E LON Sunblind actuator 4 ports for AC motors with 3 limit switches

4x

~ M

Metrics/mounting: (HxWxD) 85(45) x 140 x 60mm DIN rail mounting

 Appropriate to sun tracking and shading correction control

w/o hand operation with hand operation

 4 pole-reversing outputs for max. current of 1 A per channel, requires no separate control unit

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

RBA8-DC RBA8-DC-b

w/o hand operation with hand operation

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 180mA

 8 pole-reversing outputs for max. current of 1 A per channel, requires no separate control unit

Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting

 Appropriate to sun tracking and shading correction control

121 214 C 121 215 C

Available application: SC121204EC: 4 sunblind actuators 3 sunbl. group ctrl.

 Relay module for 24V DC motors for sunblinds, shutters or windows

 Parameterisable power-on and protection behaviour as well as scene memory for each channel

58

RBA4-DC RBA4-DC-b

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 100mA

 Appropriate to sun tracking and shading correction control

121 234 C 121 235 C

Available application: SC121234EC: 4 sunblind actuators 3 sunbl. group ctrl.

 Relay module for 24V DC motors for sunblinds, shutters or windows

ombra RBA8-DC LON Sunblind actuator 8 ports for 24V DC motors

_M

w/o hand operation with hand operation

 Max. motor power 250W, interlocked contacts and separate feedin for each port

 Parameterisable power-on and protection behaviour as well as scene memory for each channel

8x

RBA4-3E RBA4-3E-b

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 100mA

ombra RBA4-DC LON Sunblind actuator 4 ports for 24V DC motors

_M

Available application: SC121232EC: 2 sunblind actuators 3 sunbl. group ctrl.

 Relay module for 4 sunblind motors with 3 limit switches

 Parameterisable power-on and protection behaviour as well as scene memory for each channel

4x

w/o hand operation with hand operation

121 218 C 121 219 C

Available application: SC121208EC: 8 sunblind actuators 3 sunbl. group ctrl.

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


r series

e.control products

LON SMI Sunblind actuators Figure

Specification

Technical data

Order No.

ombra RBA4-SMI LON SMI Sunblind actuator 4 ports

RBA4-SMI RBA4-SMI-b

121 254 C 121 255 C

 Module for accurate positioning of max. four groups of 230V SMI sunblind motors

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 25mA Mains: 230V AC max. 1.5W

 Monitoring of motor status  Appropriate to sun tracking and shading correction control due to accurate positioning control (<2°)

4x

~M

 Parameterisable power-on and protection behaviour as well as scene memory for each channel ombra RBA16-SMI LON SMI Sunblind act. 16 groups  Module for accurate positioning of max. 16 SMI sunblind motors 230V in user-defined groups  Monitoring of motor status

16x

~M

_M

LoVo

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 25mA Mains: 230V AC max. 1.5W

ombra RBA4-SMI LoVo LON SMI Sunblind actuator 4 ports

RBA4-LoVo w/o hand operation RBA4-LoVo-b with hand operation

 Module for accurate positioning of max. four groups of 24V DC SMI sunblind motors

Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 25mA Mains: 230V AC max. 1.5W

 Appropriate to sun tracking and shading correction control due to accurate positioning control (<2°)  Parameterisable power-on and protection behaviour as well as scene memory for each channel

121 264 C 121 265 C

Ports: 4 SMI (broadcast), max. 16 motors Metrics: (HxWxD) 85(45) x 105 x 60mm Available application: SC121254EC: 4 sunblind actuators Network/power supply: Type: TP/FT-10 (FTT-10) Voltage: 24V DC, max. 25mA Mains: 230V AC max. 1.5W

121 267 C

Ports: 4 SMI (addressed), max. 16 motors

 Appropriate to sun tracking and shading correction control due to accurate positioning control (<2°)

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

 Parameterisable power-on and protection behaviour as well as scene memory for each group

Available application: SC121256EC: 16 sunblind actuators 3 sunbl. group ctrl.

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

121 257 C

Ports: 4 SMI (addressed), max. 16 motors

Available application: SC121256EC: 16 sunblind actuators 3 sunbl. group ctrl.

 Monitoring of motor status

LoVo

Available application: SC121254EC: 4 sunblind actuators

 Parameterisable power-on and protection behaviour as well as scene memory for each group

 Module for accurate positioning of max. 16 SMI sunblind motors 24V DC in user-defined groups

_M

Metrics: (HxWxD) 85(45) x 105 x 60mm

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting

ombra RBA16-SMI LoVo LON SMI Sunblind act. 16 groups

16x

Ports: 4 SMI (broadcast), max. 16 motors

 Appropriate to sun tracking and shading correction control due to accurate positioning control (<2°)

 Monitoring of motor status 4x

w/o hand operation with hand operation

59


e.control products

r series

LON Digital outputs Figure

2x

4x M

or

2-P/PDM

3-P

4x

8x M

or

2-P/PDM

6x or

2-P/PDM

2-P/PDM

M 3-P

8x

16x M

M 3-P

12x M

M

or

M 3-P

Specification

Technical data

Order No.

clima RAA4 LON Digital output 4 ports

Network: TP/FT-10 (FTT-10)

121 324 C

 Triac outputs for 4 thermoelectric or 2 motor-driven actuators with 24 - 230V AC operating voltage

Power supply: 24V DC, max. 30mA

 On/off, open/close or pulse width modulated operation selectable via software  Parameterisable pulse-duration, output limits and motor runtime

Metrics/mounting: (HxWxD) 85(45) x 88 x 60mm DIN rail mounting

 Automatic valve maintenance function during non-use periods

Available application: SC121304EC: 4 damper actuators 3 group controllers

clima RAA8 LON Digital output 8 ports

Network: TP/FT-10 (FTT-10)

 Triac outputs for 8 thermoelectric or 4 motor-driven actuators with 24 - 230V AC operating voltage

Power supply: 24V DC, max. 30mA

 On/off, open/close or pulse width modulated operation selectable via software  Parameterisable pulse-duration, output limits and motor runtime

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting Available application: SC121308EC: 8 damper actuators 3 group controllers

clima RAA12 LON Digital output 12 ports

Network: TP/FT-10 (FTT-10)

 Triac outputs for 12 thermoelectric or 6 motor-driven actuators with 24 - 230V AC operating voltage

Power supply: 24V DC, max. 40mA

 On/off, open/close or pulse width modulated operation selectable via software  Parameterisable pulse-duration, output limits and motor runtime

Metrics/mounting: (HxWxD) 85(45) x 158 x 60mm DIN rail mounting Available application: SC121312EC: 12 damper actuators 3 group controllers

clima RAA16 LON Digital output 16 ports

Network: TP/FT-10 (FTT-10)

 Triac outputs for 16 thermoelectric or 8 motor-driven actuators with 24 - 230V AC operating voltage

Power supply: 24V DC, max. 40mA

 Parameterisable pulse-duration, output limits and motor runtime

121 322 C

Load: 24-230V AC, max. 500mA per output

 Automatic valve maintenance function during non-use periods

 On/off, open/close or pulse width modulated operation selectable via software

121 328 C

Load: 24-230V AC, max. 500mA per output

 Automatic valve maintenance function during non-use periods

 Automatic valve maintenance function during non-use periods

60

Load: 24-230V AC, max. 750mA per output

121 326 C

Load: 24-230V AC, max. 500mA per output Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting Available application: SC121316EC: 16 damper actuators 3 group controllers

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


r series

e.control products

LON Analogue inputs/outputs Figure

Specification

Technical data

Order No.

clima RAA4-10V LON Analogue I/O module 4 ports

Network/power supply: TP/FT-10 (FTT-10) 24V DC, max. 100mA

121 344 C

 Module for 4 sensors or actuators with analogue control signal  Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA 4x M

4x or

0-10V 0-20mA

0-10V 0-20mA

Metrics: (HxWxD) 85(45) x 88 x 60mm

clima RAA8-10V LON Analogue I/O module 8 ports

Network/power supply: TP/FT-10 (FTT-10) 24V DC, max. 180mA

 Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA M

8x or

0-10V 0-20mA

0-10V 0-20mA

12x or

0-10V 0-20mA

0-10V 0-20mA

Network/power supply: TP/FT-10 (FTT-10) 24V DC, max. 260mA

M

16x

0-10V 0-20mA

or 0-10V 0-20mA

Available applications: SC121308EC: 8 damper actuators SC111048EC 8 universal I/O objects

Input: 10 bit resolution, resistance 100kΩ Metrics: (HxWxD) 85(45) x 158 x 60mm

clima RAA16-10V LON Analogue I/O module 16 ports

Network/power supply: TP/FT-10 (FTT-10) 24V DC, max. 340mA

 Parameterisable output limitation and valve maintenance function during non-use periods, changeable network variables for input signal mapping

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

121 342 C

Output current: max. 20mA each

 Parameterisable output limitation and valve maintenance function during non-use periods, changeable network variables for input signal mapping

 Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA 16x

Input: 10 bit resolution, resistance 100kΩ

clima RAA12-10V LON Analogue I/O module 12 ports

 Module for 16 sensors or actuators with analogue control signal

121 348 C

Output current: max. 20mA each

Metrics: (HxWxD) 85(45) x 105 x 60mm

 Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA M

Available applications: SC121304EC: 4 damper actuators SC111044EC 4 universal I/O objects

 Parameterisable output limitation and valve maintenance function during non-use periods, changeable network variables for input signal mapping

 Module for 12 sensors or actuators with analogue control signal

12x

Input: 10 bit resolution, resistance 100kΩ

 Parameterisable output limitation and valve maintenance function during non-use periods, changeable network variables for input signal mapping

 Module for 8 sensors or actuators with analogue control signal

8x

Output current: max. 20mA each

Available applications: SC121312EC: 12 damper actuators SC111042EC 12 universal I/O objects 121 346 C

Output current: max. 20mA each Input: 10 bit resolution, resistance 100kΩ Metrics: (HxWxD) 85(45) x 175 x 60mm Available applications: SC121316EC: 16 damper actuators SC111046EC 16 universal I/O objects

61


e.control products

r series

LON MP-Bus Controller and digital inputs Figure

Specification

Technical data

Order No.

clima RAA8-MP * LON MP-Bus Controller 8 ports

Network: TP/FT-10 (FTT10)

121 358 C

 Controller module for 8 damper, flap, valve or VAV actuators with MP-Bus interface

Power supply: 24V DC, max. 60mA

 Monitoring of actuator status  Utilisation of sensors connected to MP-Bus actuators (0-10V, resistive or floating contact)  Parameterisable output limitation and valve maintenance function, changeable network variables for input signal mapping

8x NO / NC

16x NO / NC

6x NO / NC

Example of use: switch not included

* Availability: see pricelist

62

Metrics/mounting: (HxWxD) 85(45) x 88 x 60mm DIN rail mounting Available application: SC121358EC: 8 actuators 8 sensor objects 3 group controllers

lumina B8 LON Digital input 8 ports

Network: TP/FT-10 (FTT10)

 8 inputs for installation push buttons or other devices with floating contacts (e.g. window contacts, dew point sensors or occupancy sensors)

Power supply: 24V DC, max. 60mA

 Powerful application for switching and dimming lamps, controlling sunblinds and recalling or storing scenes

Metrics/mounting: (HxWxD) 85(45) x 70 x 60mm DIN rail mounting Available application: SC111008EC: 8 switches

lumina B16 LON Digital input 16 ports

Network: TP/FT-10 (FTT10)

 16 inputs for installation push buttons or other devices with floating contacts (e.g. window contacts, dew point sensors or occupancy sensors)

Power supply: 24V DC, max. 100mA

 Powerful application for switching and dimming lamps, controlling sunblinds and recalling or storing scenes

Available application: SC111008EC: 16 switches

Network: TP/FT-10 (FTT10)

 Compact flush mounting device connecting installation push buttons to LON networks for lighting or sunblind control, scene re-calling or log-on/-off

Power supply: 24V AC/DC, max. 50mA (w/o outputs)

 2 outputs 24V, 100mA for control lamps, relays etc.  Suitable for all installation push buttons, fits into deep flush mouting or cavity wall socket

111 016 C

Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting

lumina T6 LON Digital input module

 6 inputs for floating contacts

111 008 C

211 006 C

Metrics/mounting: (HxWxD) 50 x 50 x 20mm In cavity wall or flush mounting sockets Available applications: SC211006EC: 6 switches 2 lamp actuators 1 occupancy controller

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


r series

e.control products

LON Combined actuators Figure

4x

Specification

Technical data

Order No.

lumina RDSA4 LON Combined actuator 8DI-4S

RDSA4 RDSA4-b

111 104 C 111 105 C

 Compact module for 4 groups of electric loads with 8 binary inputs for floating contacts (e.g. switches, occupancy sensors etc.)

Network/power supply: Type: TP/FT-10 (FTT10) Voltage: 24V DC, max. 170mA

 Switch outputs rated 16A, with high current relays (120A) for capacitive and lamp loads, separate feed-in for each output

8x NO / NC

8x

 Compact module for 8 groups of electric loads with 8 binary inputs for floating contacts (e.g. switches, occupancy sensors etc.)

Network/power supply: Type: TP/FT-10 (FTT10) Voltage: 24V DC, max. 250mA

8x

~

M 2-P/PDM

4x or

8x

M 3-P

NO / NC

Available application: SC111008SC: 8 switches 8 lamp actuators 1 lamp group ctrl.

 Compact module for 4 sunblind motors with 8 binary inputs for floating contacts (e.g. sunblind switches, window contacts etc.)

Network/power supply: Type: TP/FT-10 (FTT10) Voltage: 24V DC, max. 130mA

w/o hand operation with hand operation

Available application: SC111008BC: 8 switches 4 sunblind actuators 1 sunbl. group ctrl. Network: TP/FT-10 (FTT-10)

 Triac outputs for 8 thermoelectric or 4 motor-driven actuators with 24 - 230V AC operating voltage

Power supply: 24V DC, max. 110mA

 Parameterisable pulse-duration and motor runtime  Automatic valve maintenance function during non-use periods

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

111 204 C 111 205 C

Metrics/mounting: (HxWxD) 85(45) x 140 x 60mm DIN rail mounting

clima RDAA8 LON Combined module 8DI / 8 DO

 8 inputs for floating contacts, e.g. window contacts, dew point sensors or occupancy sensors

111 108 C 111 109 C

Metrics/mounting: (HxWxD) 85(45) x 140 x 60mm DIN rail mounting

RDBA4 RDBA4-b

NO / NC

8x

w/o hand operation with hand operation

ombra RDBA4 LON Combined actuator 8DI-4MSE

 Max. motor power 250W, interlocked contacts and separate feedin for each port

M

Available application: SC111008SC: 8 switches 8 lamp actuators 1 lamp group ctrl. RDSA8 RDSA8-b

NO / NC

4x

Metrics/mounting: (HxWxD) 85(45) x 123 x 60mm DIN rail mounting

lumina RDSA8 LON Combined actuator 8DI-8S

 Switch outputs rated 10A, with high current relays (120A) for capacitive and lamp loads, separate feed-in for 2 outputs

8x

w/o hand operation with hand operation

111 328 C

Load: 24-230V AC, max. 500mA per output Metrics/mounting: (HxWxD) 85(45) x 140 x 60mm DIN rail mounting Available application: SC111008AC: 8 binary inputs 8 damper actuators 3 group controllers

63


e.control products

m series

LON M series - the modular concept Modular distribution boxes Prefabricated system distribution boxes and spega’s M series: it couldn’t be better! There are definite advantages to the security of scheduled delivery of prefabricated and tested system distribution boxes combined with rapid on-site installation and faultless connection of field equipment. Since no building project is the same as the next, it is absolutely essential for the installed actuators to be variable. This is where the M series of spega gets full points. Up to 24 random input or putput channels can be operated on a LON universal controller sistema MC16 and, thanks to the application-specific dimensioned modules, without any gain links or coupling relays. Compared with conventional solutions, this saves 50% in terms of space and wiring.

Connectors for LON control panels

clima RDAA8 (p. 63) M series actuators (p. 66-71) sistema MC16 (p. 66)

e.control distribution box

In addition to the extensive module range of the M series (see pp. 66-71), spega’s modular system also includes two types of ready-touse metal-enclosed distribution boxes:

Example of a distribution box with gesis plug connectors for 4 axes (each with 2 x lighting, sunblind motor, actuator for heating and cooling, window contact and dewpoint sensor)

 Distribution box S with plug-connectors  Distribution box R with terminals

tuators or motors (see p. 65) and for the 24V DC system supply, which supplies not only the installed LON devices but also additional LON control devices and multisensors which are connected to the distribution box.

e.control distribution box S A special feature of the system distribution box S is their extremely short and faultless installation and connection time on site. Here it is not even necessary to open the metal casing. The boxes thus have clearly defined guarantee limits at the connectors. The distribution boxes are as a rule available in two optimised sizes for decentralised room automation concepts. Both additionally have space for a 24V transformer for supplying ac-

e.control distribution box R System distribution boxes R require less coordination effort since coordination via plug types is not required. They are therefore suitable also for smaller building projects in which the planning effort involved for distribution boxes with plug-connectors would be

Cable entry and connection for a prefabricated distribution box with terminals

inappropriate. A wide cable-entry opening with foam sealing facilitates the entry of the cables (see small illustration).

~ DALI

sistema MC16

M

M

SMI

MP-Bus

M series modules (p. 66-71, max. 24 ports can be combined)

System distribution boxes R are likewise normally available in two sizes. They also have space for a transformer and the DC system supply. External LON devices can thus be connected by means of additional terminals and also supplied.

Unlimited variety: random combinations of up to 24 I/O ports per universal controller

64

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


m series

e.control products

LON M series - Distribution boxes Figure

Specification

Technical data

Order No.

System distribution box S

Material/protection: Sheet steel 1mm zinc plated, IP40

SYS-G1 SYS-G2

 Sheet steel cabinet with quick release fastener, accepts all e.control devices for DIN rail mounting  Applicable for installation in suspended ceilings or false floors  Quick and accurate mounting without opening due to plugconnectors

Plug system: Wieland gesis or WAGO Winsta Power supply: 24V DC via external supply unit or 230V AC via toroid transformer and internal power supply

 Project-specific shipment, readyto-use and pre-tested

Metrics (HxWxD): Type G1: 80 x 600 x 250mm Type G2: 80 x 900 x 250mm Other sizes on request

System distribution box R

Material/protection: Sheet steel 1mm zinc plated, IP40

 Sheet steel cabinet mit quick release fastener and cable port with strain relief, accepts all e.control devices for DIN rail mounting  Quick and accurate connection of preassembled cables due to terminal blocks  Project-specific shipment, readyto-use and pre-tested

sistema RKT Toroidal transformer 230V / 24V AC  Toroidal-core transformer to supply e.control modules and field devices connected to the system cabinet  Overload-proof  Low leakage field  Available only in conjunction with e.control system distribution boxes

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

SYS-X1 SYS-X2

Terminal block system: Project-specific Power supply: 24V DC via external supply unit or 230V AC via toroid transformer and internal power supply Metrics (HxWxD): Type X1: 80 x 600 x 350mm Type X2: 80 x 900 x 350mm Other sizes on request RKT50 Power 50 VA RKT100 Power 100 VA RKT160 Power 160 VA Voltage: Primary 230V AC, 50/60Hz Secondary 24V AC, 50/60Hz Metrics (HxD)/weight: RT50: 37 x 92 mm, 0,9 kg RT100: 45 x 95 mm, 1,2 kg RT160: 47 x 122 mm, 2,0 kg

65


e.control products

m series

LON M series - Lighting modules Controller

Actuator modules

Input module

sistema MC16

lumina BE8

lumina SA4

lumina SA8

 Relay module 4 x 16A  Relay module 8 x 10A  LON Universal controller  Digital input 8 ports for floating contacts (e.g. with high-current contacts, with high-current contacts, for modular actuators window contacts, dew suitable for electric loads, suitable for electric loads, for connecting M series point or occup. sensors) optional with hand op. optional with hand op. modules with up to 24 I/O‘s Order No.

121 000 C

Sensor or actuator type (symbol)

Network type / transceiver

TP/FT-10 FTT10

Metrics (HxWxD)

120 104 (w/o op.) 120 105 (with op.)

120 108 (w/o op.) 120 109 (with op.)

NO / NC

Parameterisable via LNS plug-in

Supply voltage Current consumption

110 008

24 V DC 20mA (max.)

via controller 40mA

via controller 80mA (max.)

via controller 160mA (max.)

85(45) x 35 x 60mm

85(45) x 70 x 60mm

85(45) x 53 x 60mm

85(45) x 70 x 60mm

24 (any combination)

8

4

8

4 (16A)

8 (10A)

Light actuator

Light actuator

Priority evaluation Space usage control Light switch Stair lighting

Priority evaluation Space usage control Light switch Stair lighting

Combinability (see also pages 68-71) Controller: supported I/O ports Modules: max. claimed ports Input ports (Type and quantity) Digital, floating contact

8

Output ports (Type, quantity and power) Relay 230V AC Control output 1-10V (current sink) DALI groups / MS-DAL (max. number of devices) VDI 3813-2 Functions Sensor functions

Actuator functions Application functions

66

Occupancy detection Window monitoring Dewpoint monitoring

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


m series

lumina ST4

lumina DAL4

lumina DAL8

e.control products

lumina DAL16

 Control output 4 x 1-10V  DALI Controller 4 groups  DALI Controller 8 groups  DALI Controller 16 groups with 4 relays, suitable control and supply of 64 control and supply of 64 control and supply of 64 for electronic ballasts for DALI devices in 4 groups, DALI devices in 8 groups, DALI devices in 16 groups, fluorescent lamps suitable for MS-DAL suitable for MS-DAL suitable for MS-DAL

120 164

120 168

120 166

DALI

DALI

DALI

via controller 80mA (max.)

via controller 100mA (max.)

via controller 100mA (max.)

via controller 100mA (max.)

85(45) x 70 x 60mm

85(45) x 70 x 60mm

85(45) x 70 x 60mm

85(45) x 70 x 60mm

120 144 (w/o op.) 120 145 (with op.)

4

4 8 (4 MS-DAL)

8 8 (4 MS-DAL)

16 8 (4 MS-DAL)

4 (10A) 4 (40mA) 4/4 (max. 64 DALI devices)

8/4 (max. 64 DALI devices)

16 / 4 (max. 64 DALI devices)

Light actuator

Light actuator

Light actuator

Light actuator

Priority evaluation Space usage control Light switch Stair lighting

Priority evaluation Space usage control Light switch Stair lighting

Priority evaluation Space usage control Light switch Stair lighting

Priority evaluation Space usage control Light switch Stair lighting

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

67


e.control products

m series

LON M series - Sunblind modules Controller

Actuator modules

sistema MC16

ombra BA2

ombra BA2-3E

ombra BA4

 LON Universal controller  Sunblind act. 2x230VAC  Sunblind act. 2x230VAC  Sunblind act. 4x230VAC for modular actuators for motors with 2 limit for motors with 2 limit for motors with 3 limit for connecting M series switches, interlocking conswitches, interlocking conswitches, interlocking conmodules with up to 24 I/O‘s tacts, optional hand op. tacts, optional hand op. tacts, optional hand op. Order No.

121 000 C

Sensor or actuator type (symbol)

~ M

120 232 (w/o op.) 120 233 (with op.)

~ M

120 204 (w/o op.) 120 205 (with op.)

~ M

230V AC

230V AC

24 V DC 20mA (max.)

via controller 40mA (max.)

via controller 40mA (max.)

via controller 80mA (max.)

85(45) x 35 x 60mm

85(45) x 53 x 60mm

85(45) x 53 x 60mm

85(45) x 70 x 60mm

24 (any combination)

2

2

4

Network type / transceiver

TP/FT-10 FTT10

Metrics (HxWxD)

120 202 (w/o op.) 120 203 (with op.) 230V AC

Parameterisable via LNS plug-in

Supply voltage Current consumption

Combinability (see also pages 66-67, 70-71) Controller: supported I/O ports Modules: max. claimed ports Output ports (Type, quantity and power) Motor 230V AC with 2 limit switches

2 (250W)

Motor 230V AC with 3 limit switches

4 (250W) 2 (250W)

Motor 24V DC Motor SMI 230V Motor SMI LoVo VDI 3813-2 Functions Sensor functions

Actuator functions Application functions

68

Sunblind actuator

Sunblind actuator

Sunblind actuator

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


m series

ombra BA4-DC

ombra BA4-SMI

e.control products

ombra BA4-SMI LoVo

ombra BA16-SMI

ombra BA16-SMI LoVo

 Sunblind act. 16 x SMI  Sunbl. act. 4 x SMI LoVo  Sunbl. act. 16 x SMI LoVo  Sunblind act. 4 x 24V DC  Sunblind act. 4 x SMI for 16 groups of 230V SMI with pole-reversing output for 4 groups of 230V SMI for 16 groups of 24V SMI for 4 groups of 24V SMI motors (addressed), with for 4 DC motors, optional motors (broadcast), with motors (addressed), with motors (broadcast), with status feedback with hand operation status feedback status feedback status feedback

120 214 (w/o op.) 120 215 (with op.)

_M

120 254 (w/o op.) 120 255 (with op.)

120 257 (with op.)

120 264 (w/o op.) 120 265 (with op.)

120 267 (with op.)

LoVo

24V DC

LoVo

via controller 80mA (max.)

230V AC max. 1W

230V AC max. 1W

230V AC max. 1W

230V AC max. 1W

85(45) x 70 x 60mm

85(45) x 53 x 60mm

85(45) x 53 x 60mm

85(45) x 53 x 60mm

85(45) x 53 x 60mm

4

4

16

4

16

4 groups (broadcast) (max. 16 motors)

16 groups (addressed) (max. 16 motors) 4 groups (broadcast) (max. 16 motors)

16 groups (addressed) (max. 16 motors)

4 (1.0A)

Sunblind actuator

Sunblind actuator

Sunblind actuator

Sunblind actuator

Sunblind actuator

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

Priority evaluation Space usage control Shading correction

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

69


e.control products

m series

LON M series - Analogue and digital I/O modules Sensor module

Controller sistema MC16

clima AE8-P

Universal I/O modules clima AA4-10V

clima AA8-10V

 LON Universal controller  Analogue input 8port *  Analogue I/O module 4 p.  Analogue I/O module 8 p. for passive temperature for modular actuators with reversible channels with reversible channels sensors (Pt1000, Ni1000, for connecting M series for sensors or actuators for sensors or actuators NTC<25k) modules with up to 24 I/O‘s with 0-10V or 4-20mA with 0-10V or 4-20mA Order No.

121 000 C

Sensor or actuator type (symbol)

Pt, Ni, NTC

Network type / transceiver

TP/FT-10 FTT10

Metrics (HxWxD)

120 344

120 348

M

Parameterisable via LNS plug-in

Supply voltage Current consumption

110 058

0-10V/4-20mA

0-10V

M 0-10V/4-20mA

0-10V

24 V DC 20mA (max.)

via controller 20mA

via controller 80mA

via controller 160mA

85(45) x 35 x 60mm

85(45) x 70 x 60mm

85(45) x 53 x 60mm

85(45) x 70 x 60mm

24 (any combination)

8

4

8

4 (output: 20mA)

8 (output: 20mA)

Temperature measurement Air quality measurement Rel. humidity measurement Actuator

Temperature measurement Air quality measurement Rel. humidity measurement Actuator

Priority evaluation Sequence control Output limitation

Priority evaluation Sequence control Output limitation

Combinability (see also pages 66-69) Controller: supported I/O ports Modules: max. claimed ports Input ports (Type and quantity) Passive analogue (Pt1000, Ni1000, NTC<25k)

8

Universal ports (Type, quantity and power) Analogue input/output 0(2)-10V, 0(4)-20mA Output ports (Type, quantity and power) Triac 24-230V AC 2-point (PWM) / 3-point (motor) Relays 3 stage (0-I-II-III) MP Bus devices Actuators/sensors VDI 3813-2 Functions Sensor functions

Actuator functions Application functions

70

Temperature measurement Window monitoring Dewpoint monitoring

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


m series

e.control products

Actuator modules clima AA4

 Digital output 4 port for 4 thermoelectric or 2 motor-driven actuators with 24V or 230V AC

clima AA8

 Digital output 8 port for 8 thermoelectric or 4 motor-driven actuators with 24V or 230V AC

clima LA2-3

clima AA8-MP

 Multi-stage switch 230V  MP-Bus Controller 8 port * 2 x 3 stages for 8 MP-Bus-compatible for two 3-speed fan with flap, valve or VAV interlocking relays actuators plus sensors

120 324

120 328

120 332

M

M

2-P/3-P

2-P/3-P

~

I-II-III

via controller 5mA

via controller 5mA

via controller 40mA (max.)

via controller 40mA (max.)

85(45) x 53 x 60mm

85(45) x 70 x 60mm

85(45) x 53 x 60mm

85(45) x 53 x 60mm

4

8

2

4/2 (750mA)

8/4 (500mA)

120 358

M

8 actuators 8 sensors

2 (250W) 8/8

Actuator

Actuator

Actuator

Temperature measurement Air quality measurement Rel. humidity measurement Actuator

Priority evaluation Sequence control Output limitation

Priority evaluation Sequence control Output limitation

Priority evaluation Sequence control Output limitation

Priority evaluation Sequence control Output limitation

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

* Availability: see pricelist

71


e.control products

fastcon

LON FastCon Actuators Figure

4x

Specification

Technical data

Order No.

lumina FSA4 LON Switch actuator 4 ports

Network: TP/FT-10 (FTT-10)

321 104 C

 Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for independent switching of 4 electric loads

Power supply: 230V AC, max. 16A

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.  Stair lighting, switch-on/off delay and scene memory

8x

4x

~ M

8x

~ M

72

Metrics/mounting: (HxWxD) 70 x 292 x 77mm Mounting in false floor, suspended ceiling or on cable route Available application: SC121104EC: 4 lamp actuators 3 lamp group ctrl.

lumina FSA8 LON Switch actuator 8 ports

FSA8 FSA8-5

 Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for independent switching of 8 electric loads

Network/power supply: Type TP/FT-10 (FTT-10) Voltage 230V AC, 16A (3 x 16A)

 High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.

1-phase supply 3-phase supply

Metrics/mounting: (HxWxD) 70 x 432 x 77mm Mounting in false floor, suspended ceiling or on cable route

 Stair lighting, switch-on/off delay and scene memory

Available application: SC121108EC: 8 lamp actuator 3 lamp group ctrl.

ombra FBA4 LON Sunblind actuator 4 ports

Network: TP/FT-10 (FTT-10)

 Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for 4 AC motors for sunblinds, shutters or windows

Power supply: 230V AC, max. 16A

 Appropriate to sun tracking and shading correction (p. 76)  Parameterisable power-on and protection behaviour, scene memory for 10 positions per channel including slat angle

Metrics/mounting: (HxWxD) 70 x 292 x 77mm, mounting in false floor, susp. ceiling or cable route Available application: SC121204EC: 4 sunblind actuators 3 sunbl. group ctrl. FBA8 FBA8-5

 Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for 8 AC motors for sunblinds, shutters or windows

Network/power supply: type TP/FT-10 (FTT-10) voltage 230V AC, 16A (3 x 16A)

 Parameterisable power-on and protection behaviour, scene memory for 10 positions per channel including slat angle

321 204 C

Motor load (per output): max. 250W, with micro-fuse 6.3A

ombra FBA8 LON Sunblind actuator 8 ports

 Appropriate to sun tracking and shading correction (p. 76)

321 108 C 321 109 C

1-phase supply 3-phase supply

321 208 C 321 209 C

Motor load (per output): max. 250W, with micro-fuse 6.3A Metrics: (HxWxD) 70 x 432 x 77mm Available application: SC121208EC: 8 sunblind actuators 3 sunbl. group ctrl.

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


fire damper modules

e.control products

LON Fire and smoke damper modules Figure

8x NO / NC

8x NO / NC

4x 24V AC/DC

4x 230V AC

Specification

Technical data

Order No.

clima BSK8-E LON Fire damper position indicator

Network: TP/FT-10 (FTT-10)

411 408 C

 Module with 8 inputs for position indicator switches of up to 8 fire dampers

Power supply: 24V AC/DC, max. 65mA

 Plastic case, cable entry points with strain relief, protection class IP54 (IP65 on request)  External 24V power supply via bus cable  Applications according to LonMark to initiate and forward fire alams or to monitor states of binary contacts

Metrics: (HxWxD) 63 x 254 x 180mm Available applications: SC411408EC 8 fire smoke damper actuators SC411008EC 8 switches

clima BSK4-E230 LON Fire damper position indicator

Network: TP/FT-10 (FTT-10)

 Module with 8 inputs for position indicator switches of up to 8 fire dampers

Power supply: 230V AC, max. 2W

 Plastic case, cable entry points with strain relief, protection class IP54 (IP65 on request)  Integrated 230V power supply  Applications according to LonMark to initiate and forward fire alams or to monitor states of binary contacts

Metrics: (HxWxD) 63 x 254 x 180mm Available applications: SC411408EC 8 fire smoke damper actuators SC411008EC 8 switches

clima BSK4-F LON Fire damper actuator 4 ports

Network: TP/FT-10 (FTT-10)

 Module to control 4 fire or smoke dampers with 24V AC/DC spring return drive

Power supply: 24V DC, max. 150mA

 8 inputs for floating contacts to indicate open-end and closed-end position  External 24V power supply via bus cable

Metrics: (HxWxD) 63 x 254 x 180mm Available application: SC421404EC 4 fire smoke damper actuators

clima BSK4-F230 LON Fire damper actuator 4 ports

Network: TP/FT-10 (FTT-10)

 Module to control 4 fire or smoke dampers with 230V AC spring return drive

Power supply: 230V AC, max. 4W

 Integrated 230V power supply  Application according to LonMark profile „Fire Smoke Damper Act.“

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

421 404 C

Max. load (per relay): 24V AC/DC, 3A

 Application according to LonMark profile „Fire Smoke Damper Act.“

 8 inputs for floating contacts to indicate open-end and closed-end position

411 409 C

421 405 C

Max. load (per relay): 24V AC/DC, 3A Metrics: (HxWxD) 63 x 254 x 180mm Available application: SC421404EC 4 fire smoke damper actuators

73


e.control products

weather sensors

LON Compact weather sensor Figure

Specification

Technical data

Order No.

ombra W2 LON compact weather sensor

Network/power supply: Type TP/FT-10 (FTT10) Voltage 24V DC, max. 20mA

411 202 C

 Compact device for daylight and temperature-dependent controls  Integrated light and temperature sensor  With terminal for wind speed sensor ombra W1-Wh or rain sensor ombra W1-R  Safety class IP54, weatherproof, mounting angle enclosed

Metrics/mounting: (HxWxD) 93 x 72 x 57mm Pole- or wall-mounting Available application: SC411202EC: Light sensor Temperature sensor Wind speed sensor Rain sensor Protection controller Sunlight controller

ombra W1-Wh Wind speed sensor for ombra W2

Power supply: 24V DC, max. 1A

 Compact sensor for vectorial wind speed measurement

Measurement signal: Pulse, reed contact

 Connectable to compact weather sensor ombra W2  Integrated automatic heating for ice free usage up to -30°C

Measurement range: 0.5...40 m/s

 Safety class IP54, weatherproof, mounting angle enclosed

Metrics/mounting: (HxØ) 160 x 134mm Pole- or wall-mounting

ombra W1-R Rain sensor for ombra W2

Power supply: 24V DC, max. 150mA

 Compact sensor for rain and snow detection

Measurement signal: Binary, floating contact

 Connectable to compact weather sensor ombra W2 or to any binary input (e.g. lumina T6/B8)  Integrated automatic heating for ice free usage up to -30°C

410 203

410 202

Metrics/mounting: (HxWxD) 18 x 76.5 x 54mm Pole- or wall-mounting

 Safety class IP54, weatherproof, mounting angle enclosed

ombra W1-K Terminal box for ombra W2

Material: Polycarbonate

 For wiring wind speed sensor or rain sensor to compact weather sensor ombra W2

Accessories: 8 terminal blocks 2,5mm 3 screwed cable glands IP65

 With terminal block for power supply, LON bus and sensor signal  Safety class IP65, weatherproof

74

950 201

Metrics/mounting: (HxWxD) 140 x 140 x 80mm

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


weather sensors

e.control products

LON Weather station Figure

Specification

Technical data

Order No.

ombra W8 LON Sensor unit for 8 sensors

Network/power supply: Type TP/FT-10 (FTT10) Voltage 24V DC, max. 30mA

111 288 C

 Module for collecting and processing of all weather data from combined sensor ombra W7-C and wind direction sensor ombra W1-D  8 analogue inputs 0-10V  Integrated protection controllers for 4 facades

Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting Available application: SC111288EC: Light sensor (3x) Temperature sensor Rel. humidity sensor Wind speed sensor Wind direction sensor Rain sensor Protection controller

ombra W7-C Combined weather sensor

Power supply: 24V AC/DC, max. 650mA

 Sensor for measurement of: - wind speed - rain - outdoor brightness (3 x) - outdoor temperature - relative humidity

 Safety class IP65, weatherproof

Metering range/accuarcy: wind: 1...40m/s / 0,5m/s rain: yes/no / 1bit brightness: 0...100kLx / 10% temperature -20...60°C / 0,2°C humidity: 0...100% (rel.) / 3% Metrics/mounting: (HxØ) 430 x 130 mm Pole- or wall-mounting

ombra W1-D Wind direction sensor

Power supply: 24V AC/DC, max. 800mA

 Sensor for indicating wind direction

Metering range/accuracy: direction: 0...360° / 5°

 Integrated automatic heating as condensation protection

 Integrated automatic heating for ice free usage up to -30°C  Safety class IP65, weatherproof

Material: Polycarbonate

 For housing and connecting sensor unit ombra W8

Accessories: 1 power supply 24V DC, 2.5A 4 terminal blocks 2.5mm 4 screwed cable glands IP65

 Safety class IP65, weatherproof

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

410 204

Metrics/mounting: (HxØ) 220 x 50 mm Length of vane 165 mm Pole- or wall-mounting

ombra W1-G Terminal box for ombra W8

 Integrated power supply for sensor unit, combined weather sensor ombra W7-C and wind direction sensor ombra W1-D

410 207

950 205

Metrics/mounting: (HxWxD) 254x180x90mm

75


e.control products

controller

LON Sun tracking controller and application controller Figure

Specification

Technical data

Order No.

ombra BST LON Sun tracking controller

Network: TP/FT-10 (FTT10)

341 298 C

 Sun position-dependent positioning of slat angles for up to 15 facades or venetian blind types

Power supply: 24V DC, max. 70mA

 Supports e.control shading correction in combination with all e.control sunblind actuators  Integrated processing of telegrams from multiple light sensors (e.g. ombra W8 or ombra W2)  Anti-glare or daylight guidance strategy independently selectable for each group of venetian blinds  Manual positioning of facade groups via user menu  Integrated time clock for timedependent positioning commands

Equipment: - Display 4x16 characters, backlit - Real-time clock, battery backed - 3 LEDs (red, yellow, green) Metrics/mounting: (HxWxD) 125 x 125 x 40mm Includes box for cavity wall or flush-mounting or mounting in distribution boards Available application: SC341298EC: 1 real time clock 1 sun position controller 15 sun tracking controllers 5 facade group ctrl.

 Password protected user access  Comprehensive plug-in for stepby-step parameterisation

sistema RC2 LON Application controller

Network: TP/FT-10 (FTT10)

 Compact device for different control applications or logic processings

Power supply: 24V DC, max. 20mA

 Various software applications available on CD or on request

131 020 C

Metrics/mounting: (HxWxD) 85(45) x 35 x 60mm DIN rail mounting Available applications: 131020PW: partition wall controller 131020LG: logic controller 131020CL: constant light ctrl. occupancy ctrl. 131020CC: temperature controller thermo controller etc.

76

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


accessories

e.control products

Accessories Figure

Specification

Technical data

Order No.

clima A24-T Thermoelectric actuator

Operating voltage/current: 24V AC/DC typ. 80mA, < 250mA on power-on

020 325

 Noiseless thermoelectric actuator with optical function indicator  Closed when de-energised

Travel / force / time / cable length: 4mm / 100N / 120s / 1.0m

clima A24-10xx Analogue thermoelectric actuator

clima A24-10AC for 24V AC clima A24-10DC for 24V DC

 Noiseless continuous actuator with optical function indicator

Operating current: typ. 80mA, < 250mA on power-on

 Continuous positioning via 0-10V signal, closed when de-energised

Travel / force / time / cable length: 4mm / 100N / 120s / 1.0m

Valve adaptor for clima A24-x

Danfoss RA Giacomini Heimeier (M30x1.5) MNG (M30x1.5) MNG hoch (M30x1.5) Others on request

VA 78 VA 26 VA 80 VA 50 VA 50H

for pole Ø 48-102 mm for pole Ø 116-200 mm

950 208 950 209

for pole Ø 48-102 mm for pole Ø 116-200 mm

950 206 950 207

19“ equipment shelf: (HxWxD) 44.5 x 482 x 250mm (1 U)

943 001

 Applicable for all common valve types  Clip-in mounting of actuator

Single traverse  For mounting of sensors ombra W1-D or ombra W1-Wh

020 345 020 346

 Length 0.4m

Double traverse  For mounting of sensors ombra W1-D and ombra W1-Wh  Length 0.8m

19“ Mounting set for dialog Web  For mounting dialog Web in 19“ server rack  including wall power supply  Height: 1 U

Cable loom for push buttons

Wall power plug: Primary: 230V AC, 50Hz Secondary: 24V DC, max. 0.5A

910 050

 Connects push button switches to e.control flush mounting devices  Contents 50 cables, length 40cm  Sorted by colors

www.spega.com • e-mail: info@spega.com • fon: +49 (2841) 88049-0 • fax: +49 (2841) 88049-49

77


e.control products

general terms

General terms and conditions § 1 General 1. The following terms and conditions of sale and delivery of Spelsberg Gebäudeautomation GmbH & Co. KG (hereinafter referred to as: spega) apply to all current and – vis-à-vis businessmen regardless of a separate indication in the individual case – also to all future legal transactions unless spega have expressly acknowledged any deviations in writing. Collaterals and subsequent modifications are binding for spega only after written confirmation by spega. The employees of spega are not authorised to make oral agreements which deviate from these General Terms and Conditions. 2. Any conditions of purchase of the ordering party shall be binding only after the express agreement of spega in writing. § 2 Offers and scope of supply 1. The offers of spega shall always be subject to change and not binding. The contract comes into force only after the written acknowledgement of order by spega. spega have the right to accept an offer from the ordering party within a period of three weeks. 2. The documents which belong to spega’s offers such as figures, drawings, weight and measurement specifications only identify the subject-matter of the contract and do not constitute an assurance of the properties and features of the contractual item. They contain only approximate information within the scope of the customary commercial tolerance values.

§ 5 Transfer of risk 6. In case of notices of defect, payments of the customer can be retained only to an extent which is appropriate to the defects that have occurred if the claims The risk is transferred to the ordering party the moment the delivery leaves the of the customer are indisputable or legally ascertained. If the notice of defect is point of dispatch at spega or the moment it is made available to the ordering party unjustified, spega have the right to demand compensation from the customer for through notice of readiness for dispatch. Dispatch is carried out for account of the the expenses incurred by spega. ordering party and at the latter’s risk. 7. spega are liable according to the statutory provisions insofar as the customer § 6 Partial deliveries asserts claims for damages or for compensation of expenses which are caused spega are entitled to effect partial deliveries and also premature deliveries after by wilfulness or gross negligence. Furthermore, spega are liable according to prior information. statutory provisions if spega culpably violate an important contractual obligation as well as in cases of injury to life, body or health and insofar as guarantees § 7 Reservation of ownership have been assumed. 1. The items delivered by spega remain the property of spega until complete 8. Damages for the violation of an important contractual obligation are restricted payment of the purchase price including all incidental claims. Furthermore, spega to foreseeable, typical forms of damage insofar as not caused by wilfulness or reserve the right of ownership regarding these items up to the complete payment gross negligence and as long as there is no liability for the injury to life, body or of all existing and future claims from the already existing business relationship or health or due to guarantees assumed. Hence, these claims for damages become the one brought about by the contract. statute-barred in 12 months, and in the case of business transactions with a 2. Processing or alteration of the supplied item shall always be carried out for consumer, in 24 months. spega. If the item is processed together with other items which do not belong to 9. In all other cases, liability for damages is excluded without taking into account spega with the consequence that the item loses its legal independence, spega the legal nature of the asserted claim. Thus spega are, in particular, not liable for shall acquire co-ownership for the new item at a ratio of the value of the goods damage which has not occurred on the delivery item itself, e.g. loss of profit or delivered by spega to the other processed goods at the time of processing. other damage to the property of the customer or of his buyer. 3. If the item is mixed with other items which do not belong to spega, spega shall 10. The obligatory provisions of the product liability act shall remain unaffected. then acquire the co-ownership for the new item at a ratio of the value of the item

3. spega retain the right of ownership and copyright with regard to drawings and other documents. These drawings and documents may not be made available to delivered by spega to the other mixed item at the time of mixing. If the item of the 11. Claims for compensation of expenses on the part of the customer are limited third parties and are to be returned forthwith to spega postage paid at spega’s ordering party is to be seen as the main item, the ordering party shall proportionally to the amount of interest which the customer has in the performance of the transfer the ownership to spega. request or in the event of the order not being placed. contractual obligations.

4. For the scope of supply, the written order acknowledgement of spega is 4. In case of seizure or other interventions on the part of third parties, the ordering 12. Insofar as the liability of spega is excluded or limited, this also applies to decisive. Protective devices shall be part of the delivery if and insofar as this has party must inform spega forthwith in writing. The costs of intervention and re- personal liability of the employees, representatives and agents. procurement shall in all circumstances be borne by the ordering party. been agreed upon in writing. § 10 Impossibility 5. spega reserve the right to make modifications to the delivery item if this does 5. In case of negligent behaviour on the part of the ordering party which is in If spega are unable to render the service expected for reasons attributable to not impair the usability of the items for the purpose agreed upon, and the agreed breach of the contract as well as in the event of justified doubts regarding the spega, the ordering party has the right to rescind the contract. Damages do not cost effectiveness is not modified to the customer’s detriment. Technical improve- creditworthiness, in case of delayed payment, stoppage of payment or institution exist unless this impossibility is caused by wilfulness or gross negligence on the of insolvency proceedings, spega have the right to ask for the purchased item to ments are always permitted. part of spega, their representatives or agents. In case of slight negligence, the be returned or to take it back. This as well as seizure of the reservation item does § 3 Prices and payments liability is limited to typical, foreseeable damage, excluding indirect damage. The not imply a termination of the contract unless this would be expressly stipulated amount of damages is 10% of the value of the item which cannot be rendered, 1. All prices are net prices. Discounts shall not be granted unless otherwise by spega. Items which have been taken back can be freely used by spega. The whereby the ordering party reserves the right to prove a greater damage and agreed upon. The prices shall apply “ex works” (spega’s sales office), and income from such utilisation shall be offset against the remuneration. The ordering spega reserve the right to prove a smaller damage. exclude packaging and insurance. Bank, discount and debiting charges shall party is liable for the claim of preferential creditor. not be borne by spega. § 11 Industrial rights and copyright 6. The delivery items are to be treated carefully by the ordering party and must be 2. The prices shall be calculated on the basis of the prices of materials and fully insured by the latter at own expense against fire, water, explosion and other 1. In the event that a third party raises justified claims against the ordering party wages valid at the time of signing the contract. Should these increase by the time damage. spega must be informed forthwith of the occurrence of any damage. due to the violation of an industrial right or copyright (hereinafter referred to as of delivery, spega shall be entitled to invoice correspondingly higher prices as : industrial right) caused by products supplied by spega and contractually used, 7. The ordering party is authorised to sell off the goods in the course of a proper deemed appropriate. This shall not be affected by downpayments and advance spega shall be liable vis-à-vis the ordering party as follows: business transaction. If the ordering party disposes of the item which is covered payments made by the ordering party. by reservation of ownership, it is, however, obliged to preserve such reservation of a) spega shall, of their own choice, either bring about a right of use for the product, 3. In the absence of any agreement to the contrary, payment shall be made in ownership likewise vis-à-vis third-party purchasers. The ordering party shall assign modify the product in such a way that the industrial right is not violated or replace cash without discount ex appointed payment office of spega, and at the time of to spega for the period of the reservation of ownership, from now up to complete the product. If spega are unable to do so at appropriate conditions, they must invoicing regardless of the time of delivery of the goods (“cash upon invoice”). redemption of all claims of spega, the claims vis-à-vis its buyer arising from the take back the product and reimburse the purchase price. sale, including all subsidiary rights, regardless of whether the item purchased has 4. In the event of payment not being effected on time, spega have the right b) The aforementioned obligations of spega only exist if the ordering party notifies been re-sold without or after processing. The ordering party has the right to collect spega forthwith in writing about claims asserted by the third party, does not a) to demand annual interest in the amount of 5% over the basic interest rate the assigned claim itself, however, this assigned claim must forwarded forthwith recognise a violation and if spega reserve the right to initiate any defensive according to §1 of the discount transfer law of 9.6.1998 (Official Federal to spega. spega can notify third-party purchasers at any time of the assignment. measures and conciliation negotiations. If the ordering party stops using the Gazette I S1242), product for reasons of mitigation of damage or other important reasons, the spega are entitled to revoke the authorisation for further disposal and collection b) to immediately assert all claims vis-à-vis the ordering party arising from this with immediate effect if the ordering party does not fulfil its service obligations ordering party is obliged to point out to third parties that stopping the use of the or other business transactions, also in cases where individual instalments towards spega. product does not imply a recognition of violation of industrial rights. are not yet due, 8. If the value of the security rights granted to spega through reservation of 2. Claims of the ordering party are excluded insofar as the ordering party has to c) to retain supplies or other services from this or other transactions until complete ownership exceeds the delivery requirements of spega, including subsidiary account for the violation of the industrial rights. fulfilment of all claims which spega is entitled to from this or other orders by requirements, by more than 20%, spega shall, at the request of the ordering party, 3. Claims of the ordering party are furthermore excluded insofar as the violation the ordering party, undertake to release any securities in the corresponding amount. of industrial rights has been caused by special specifications on the part of the d) to request appropriate security. ordering party, by an application which could not be foreseen by spega or because § 8 Copyright, software license, industrial rights of the fact that the product was modified by the ordering party or used together spega reserve the right to assert any damage that goes beyond the afore- spega retain the copyright to the software. After complete payment, the ordering with products not supplied by spega. mentioned. party is granted the non-exclusive right of use to the supplied software. Here, the 4. All further claims against spega are excluded. However, this does not affect § separate license conditions for the relevant software shall apply. 5. The assertion of rights of retention or set-offs as well as the plea of non12 nor the right of the ordering party to terminate the contract. performance or poor performance are not possible vis-à-vis spega’s claims unless § 9 Warranty, damages and claims for the counterclaims are legally ascertained, indisputable or acknowledged by spega.. § 12 Liability compensation of expenses 6. In the event of cancellation of orders, the agreed price shall be due and payable with immediate effect. However, the costs which spega have saved for the partial work still to be performed until the completion of the ordered parts must be deducted. The remuneration amounts to 30% of the order volume, unless the contracting party proves a smaller damage. spega reserve the right to provide proof of a greater damage. § 4 Delivery period and delay in acceptance

1. If the customer is an entrepreneur, then he must duly fulfil his obligation to examine and give notice of defects according to §377 of the German Commercial Code. Notice of defects must be submitted in writing within 8 working days after receipt of the delivery item at the place of destination or, insofar as these could not be detected during a standard examination, within 8 working days after the detection of such defects. If the customer is a consumer, the obvious defects must be notified within two weeks following hand-over of the goods, non-obvious defects within two months following detection of the defects.

1. spega shall do their utmost to meet all delivery dates and deadlines; the delivery 2. Insofar as a service rendered on the part of spega shows a defect, the cause dates specified by spega can, however, only be intended for general guidance of which was already known at the time of transfer of risk, the customer has due to lack of explicit assurance. Delivery shall, however, take place at the latest the right to post-performance through rectification or post-delivery depending within 3 weeks of the specified date subject to timely self-delivery. on spega’s choice. The expenses required here shall be borne by spega only if 2. Deadlines begin with the sending of the order acknowledgement, however, they are not increased because a delivery item was transferred subsequently to not before provision of the final documents and/or approvals to be procured by a location other than the spega head office, unless this transfer is in accordance the ordering party, the clarification of all technical issues as well as before the with the intended purpose. Replaced goods shall become the property of spega receipt of an agreed downpayment. Delivery dates shall be deemed observed if and must be returned to spega. the delivery item has left the point of dispatch at spega by the time they expire or 3. In case of failure to subsequently perform the contractual obligations, the notice of readiness for dispatch has been submitted. customer has the right, notwithstanding any claims for damages or compensation 3. Delivery and performance dates shall be extended appropriately in case of of expenses according to the present General Terms and Conditions, to choose measures due to labour disputes, in particular in the case of strikes or lock-outs between either reducing the remuneration or, insofar as the violation of the obligaand in the event of occurrence of unforeseeable obstacles if these result in tion on the part of spega is considerable, rescinding the contract. delays in the rendering of services which are not caused by spega or their sup4. Defects in a part of the goods delivered do not entitle the customer to object to pliers or sub-suppliers. the entire delivery, unless the partial deliver is not of any interest to the customer. 4. In the event of default on the part of spega, their obligation to pay damages in 5. Warranty claims become statute-barred in 12 months, in business transactions the case of slight negligence is restricted to foreseeable damage. Further damwith a consumer in 24 months according to § 13 of the German Civil Code. This ages claims apply only if the delay is caused by wilfulness or gross negligence. does not apply insofar as these claims are based on wilful behaviour attributable 5. In case the ordering party falls into arrears with the acceptance of the service, to spega or if statutory regulations make longer deadlines mandatory. For replacespega without prejudice to further statutory claims are authorised to charge ½% ment parts or rectification work, spega shall be liable until the expiry of the period of the invoiced value per month for the costs of storage, however, a maximum of of limitation applicable to the original delivery item. 5% unless the ordering party proves a smaller damage. spega reserve the right to assert a greater damage.

78

1. In all cases of violation of contractual or pre-contractual as well as statutory obligations, spega are liable only where such violation is caused by wilfulness or gross negligence. A product liability applies only if this is made mandatory through statutory regulations. The liability for damage to persons is not affected. 2. Insofar as spega violate a main obligation or an essential contractual obligation due to negligence, spega’s compensation obligation shall be restricted to contractually typical, foreseeable forms of damage. § 13 Final provisions 1. Place of performance is Moers; exclusive venue for all legal disputes arising from this legal relationship is Moers. spega, however, have the right to take legal action against the contracting parties at their general venue. 2. The contractual relationship including the delivery conditions shall be judged exclusively according to German law, with the exclusion of the standardised UN Convention of Contracts for the International Sale of Goods, CISG, even if the ordering party has its head office abroad or if the transaction in question is an export transaction. 3. Should individual parts of the afore-described provisions be ineffective, this shall not affect the validity of the remaining delivery conditions. The contracting parties shall undertake to replace an ineffective provision through an effective version which corresponds to its economic purpose.

spelsberg gebäudeautomation gmbh + co. kg • zechenstr. 70 • 47443 moers • germany


Your local spega partner:

spelsberg geb채udeautomation gmbh zechenstr. 70 47443 moers germany fon: +49 (2841) 88049-0 fax: +49 (2841) 88049-49 e-mail: info@spega.com internet: www.spega.com

Energy efficiency

Room automation


spega e.control Products 2010-2011 (en.)