Page 1

Accessories for Long Wave UV Lamps AB-100 Adapter Bracket

Compatible UV Lamps

Now, for the first time, Spectronics Corporation’s UV lamps can be instantly attached to horizontal wet-mag machines manufactured by Magnaflux Corporation. Before, end users could only use Magnaflux lamps with these machines, since their transformers were built to slip into the machine’s side mount. The new AB-100 adapter bracket converts the side mount into a sturdy tray to secure the world’s most popular inspection lamps, including the Spectroline FC-100, and SB-100P series. The end user no longer has to drill holes, build shelves or tie down the lamp to the mag unit. Designed to last a lifetime, the AB-100 is made of solid stainless steel and is precison engineered. The dimensions of the AB-100 bracket are 7W x 5 3⁄4L x 2"H (17.8W x 14.6L x 5.1 cm H).

C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series AB-100 Adapter Bracket

AB-100 shown mounted into wet-mag machine side mount

VF-100 Spec-Stik™ Verification Fixture Spectroline®

The VF-100 Spec-Stik is a clever device that holds a UV inspection lamp securely in place during the calibration process. This rugged bar is constructed to high precision of polished aluminum. It has two posts at one end and an adjustable radiometer-sensor holder at the other. The posts hold the pistol grip of the Spectroline UV lamp to be tested. Depending on which post is chosen, the lamp filter will be positioned exactly 12" (30.5cm) or 15" (38.1cm) from the sensor. Its bracket is adjustable up or down so that the sensor can be precisely aligned with the "hot spot" of the lamp. This assures that only the most accurate readings are being taken. The Spec-Stik eliminates juggling and assures superior accuracy at the same time!

May be used with all Spectroline sensors, including the new “A” version sensors

HGS-100A Heat Guard/Stand This stainless-steel, vinyl-coated heat guard/stand makes lamp operation safer by protecting against accidental burn injury. Special insulators keep it from touching the lamp housing, thus minimizing heat conduction. The HGS-100A helps prevent mechanical shock damage, resulting in substantial savings on bulb and filter replacement costs. In addition, the HGS-100A acts as a stand so that the lamp head may be placed filter-side down on a level surface without damage to the lamp. The dimensions of the HGS-100A heat guard/stand are 85⁄8L x 61⁄2”W (21.9L x 16.5cmW).

Compatible UV Lamps BIB-150P Series C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series SB-100PR Series SB-125 Series

Compatible Radiometers DM-365XA DSE-100X DSE-100X/L DSE-100H DSE-100H/L DSE-2000A DSE-2000A/L DSE-2000H DSE-2000H/L

Compatible UV Lamps FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series


FA-100 Flexible Arm

Compatible UV Lamps

Designed for maximum versatility, the FA-100 measures 24" (61cm) when fully extended, and allows 360° rotation of the lamp head. It is ruggedly constructed of cast aluminum. The lamp head attaches to an adjustable pin on the FA-100 that can be pivoted as desired and locked into any horizontal or vertical position.

BIB-150P Series C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series SB-125 Series

The flexible arm may be used with the Spectroline W-6 wall mount or the B-6 bench mount (both separately available). The W-6 attaches easily to a wall and utilizes a stationary pin to mount the arm. The B-6 also has a stationary pin, attached to a 36" (91cm) pole that may be secured to a bench. The FA-100 can be adjusted to any height on the pole.

Compatible UV Lamps

WM-100 Wall Mounting Bracket The WM-100 is a sturdy bracket for wall mounting of the lamp head. It is equipped with an adjustable pin for total flexibility. Simply affix the stainless steel bracket to a wall and place the lamp head on the pin. Now, the lamp head may be locked into any horizontal or vertical position desired by means of a quick rotation of the adjustable pin.

BIB-150P Series C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series SB-125 Series

CC-120A and CC-250 Carrying Cases

Compatible UV Lamps

Both the CC-120A and CC-250 are convenient for lamp transport and storage. The CC-250 is constructed of painted aluminum and provides ample room for the lamp plus accessories, tools, a spare bulb, etc. The lightweight CC-120A is made of high-impact plastic, making it very easy to carry. The dimensions of the CC-120A are 12 1⁄2W x 21 5⁄16 L x 12 3⁄4" H (31.8W x 54.1L x 32.4cmH), while the CC-250 measures 10W x 21 3⁄4 L x 13 1⁄4" H (25.4W x 55.2L x 33.7cmH).

BIB-150P Series C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series SB-125 Series

CC-250

CC-120A

AF-100 UV-Transmitting Splash Guard

Compatible UV Lamps

This exclusive accessory protects the filter from splattering liquids, such as water and penetrant wash. The AF-100 easily clips firmly onto the lamp head and is readily removable.

SPECTRONICS CORPORATION

BIB-150P Series C-100 Series FC-100 Series FC-150 Series Maxima 3500 Series SB-100P Series

DISTRIBUTED BY:

956 Brush Hollow Road, P.O. Box 483 Westbury, New York 11590 800-274-8888 • 516-333-4840 Fax: 800-491- 6868 • 516-333-4859

www.spectroline.com Recycled Paper

6/01 A87121-11 PRINTED IN U.S.A.

accessories A87121-11