Page 1


SpecTech June 2015

SpecChem GHS Conversion As many of you may know, we are now using the new GHS standard. GHS stands for the Globally Harmonized System of the Classification and Labeling of Chemicals. This system was developed by the United Nations as a way to make sure everyone is on the same page when it comes to chemical regulations and standards on an international level. To date, over 65 countries have adopted GHS or are in the process of adopting the system. What is GHS? GHS is meant to be a comprehensive approach to: • Defining health, physical and environmental hazards of chemicals. • Creating classification processes that use available data on chemicals for comparison with the defined criteria. • Communicating hazards information in a uniform way on labels and safety data sheets. What is the impact for SpecChem? • The most noticeable will be changes to the safety labels, safety data sheets and chemical classification. • Labels will now include pictograms surrounded by a red diamond for materials categorized to possibly have health or physical hazards. • The new changes will start to take place on all SpecChem labels beginning June 1, 2015 (This is the official regulation date). • Products manufactured before the June 1 deadline can still be labelled according to the old standard, meaning until Dec. 1 you will see old and new style labels as we work to clear stocked inventories. For specific questions, please contact SpecChem Technical Services at 816.968.5600

Safety Data Sheet Crystal Shine

Crystal Shine DESCRIPTION: CRYSTAL SHINE is a lacquer sealer developed for interior and exterior applications, to bring out the radiance and luster of exposed aggregate and other decorative concrete surfaces with a durable protective finish. CRYSTAL SHINE is ideal for stained concrete, exposed aggregate slabs, walkways, swimming pool decks and walls. CRYSTAL SHINE is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance in the OTC/LADCO/MRPO regions Actual/Maximum VOC content = 348 grams per liter (2.88 lbs/gal) APPLICATION: Surface Preparation - The concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent adhesion of CRYSTAL SHINE. Application to Fresh Concrete - Crystal Shine dries quickly!. Apply at a uniform coverage by spray at 250-350 sq ft /gal after all surface moisture has dissipated. Product may be sprayed with a hand held “pump-up” sprayer or an airless industrial sprayer. Best result are achieved when spray applied. If a roller or applicator is used, work quickly using a short napped solvent resistant sleeve to avoid entrapping air (bubbles) and cob webbing.

    

Version 1

Batch #: 040115SS

between 55oF (12.8oC) and above 80°F (26.7°C) When sealing existing concrete, CRYSTAL SHINE may darken and highlight imperfections in hardened concrete surfaces, resulting in a mottled surface appearance. Prepare a test panel to ensure acceptable results. Do not apply in areas where there may be excessive internal water migration to the back of the film. Do not dilute or alter in any way. Read the MSDS before using the product.

SHELF LIFE: Shelf life of CRYSTAL SHINE in the original tightly closed containers is 2 years from the date of manufacture. Do not allow the accumulation of water, dirt or other contaminants.



   

FLAMMABLE. Keep away from open flame Does not provide a base for cementitious materials. Treated surfaces may be slippery when wet with rain or other liquids. For best results apply when concrete surfaces or ambient temperatures are

MANUFACTURER'S NAME: SpecChem 1511 Baltimore Ave; Suite 600 Kansas City, MO 64108 CHEMTREC: (800) 424-9300 BUSINESS PHONE: (816) 968-5600 COMPONENTS DETERMINING HAZARD: Aromatic Hydrocarbon, T-Butyl Acetate, Diisodecyl Phthalate SIGNAL WORD: Danger GHS HAZARD CLASSIFICATION(S):

When an extra high gloss is desired or on especially porous surfaces, two applications are recommended . Allow the first application to dry for 1-3 hours or until surface is dry to the touch. Sealing Existing Concrete - the surface must be thoroughly cleaned and dried before applying CRYSTAL SHINE. Pressure washing with a strong alkaline detergent to remove dirt, waxes and oils is recommended. Acids will not sufficiently clean or remove dirt, curing compounds, or old sealer from concrete. Worn or porous areas may need a second application for uniform sealing and appearance. Allow 1-3 hours before 2nd application of sealer. In general, multiple thin coats (250 - 350 sq ft/gal) will provide a harder, more durable finish than a single heavy application. Dry time will be influenced by both temperature and humidity.


Use with adequate ventilation. Keep away from open flames.

TECHNICAL SERVICES: For assistance, contact technical services at: 816-986-5600 www.specchemllc.com

24 HOUR EMERGENCY CONTACT: CHEMTREC - 800-424-9300 Made in America

CONDITIONS OF SALE - SpecChem offers this product for sale subject to and limited by the warranty which may only be varied by written agreement of a duly authorized corporate officer of SpecChem. No other representative of or for SpecChem is authorized to grant any warranty or to waive limitation of liability set forth below. WARRANTY LIMITATION - SpecChem warrants this product to be free of manufacturing defects. If the product when purchased was defective and was within use period indicated on container or carton, when used, SpecChem will replace the defective product with new product without charge to the purchaser. SpecChem makes no other warranty, either expressed or implied, concerning this product. There is no warranty of merchantability. NO CLAIM OF ANY KIND SHALL BE GREATER THAN THE PURCHASE PRICE OF THE PRODUCT IN RESPECT OF WHICH DAMAGES ARE CLAIMED. INHERENT RISK - Purchaser assumes all risk associated with the use or application of the product.

Flammable Liquid Category 3 Skin Irritation Category 2 Germ Cell Mutagenicity Category 1B Carcinogenicity Category 1B STOT – SE Category 3 (Respiratory System, Central Nervous System) Aspiration Hazard Category 1 Acute Aquatic Toxicity Category 3 Chronic Aquatic Toxicity Category 2 HAZARD STATEMENT(S): H226 H315 H340 H350 H335 H336 H304 H411

Flammable liquid and vapour Causes skin irritation May cause genetic defects May cause cancer May cause respiratory irritation May cause drowsiness or dizziness May be fatal if swallowed and enters airways Toxic to aquatic life with long lasting effects

PRECAUTIONARY STATEMENT(S): P210 Keep away from heat/sparks/open flames/hot

surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/Bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/ lighting equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P280 Wear protective gloves/eye protection/face protection. P264 Wash thoroughly after handling. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust/fume/gas/mist/vapours/ spray. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment RESPONSE STATEMENT(S): P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P370+P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction. P302+P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see supplemental first aid instructions on this label). P332+P313 If skin irritation occurs: Get medical advice/attention P364 Wash clothing before reuse. P308+P313 IF exposed or concerned: Get medical advice/attention. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON Center/doctor if you feel unwell. P301+P310 IF SWALLOWED: Immediately call a POISON Center/doctor.

P331 Do NOT induce vomiting. P391 Collect spillage. STORAGE STATEMENT(S): P403+P235 Store in a well-ventilated place. Keep cool. P233 Keep container tightly closed. P405 Store locked up. DISPOSAL STATEMENT(S): P501 Dispose of contents/container in accordance with local/regional/national/international regulations. CANADIAN REGULATIONS: CANADIAN WHMIS CLASSIFICATION and SYMBOLS:

This product is Class B2, Flammable Liquid, and D2B, Materials causing other toxic effects, per WHMIS Controlled Product Regulations. Proper Shipping Name: Domestic U.S. (Land, D.O.T.) Proper Shipping Name: Flammable Liquids, n.o.s. (contains T-Butyl Acetate) UN Identification Number: UN1993 Hazard Class: Class 3 – Flammable Liquid Packaging Group: PGII North American Emergency Response Guidebook #: 128 US DOT Symbol(s):

SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION 1.1 Trade Name (as labeled): Synonyms: CAS No: 1.2 Product Use: 1.3 Company Name: Company Address: Company Address Cont: Business Phone: Website: 1.4 Emergency Telephone Number: Date of Current Revision: Date of Last Revision:

Crystal Shine N/A Mixture High gloss lacquer-based sealer SpecChem 1511 Baltimore Ave; Suite 600 Kansas City, MO 64108 (816) 968-5600 www.specchemllc.com Chemtrec: (800) 424-9300 January 30, 2015 June 30, 2008

SECTION 2 – HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: This product is a clear liquid with a characteristic hydrocarbon odor. Health Hazards: May cause skin and respiratory system irritation. May be an aspiration hazard. Inhalation may cause drowsiness or dizziness. Flammability Hazards: This product is a flammable liquid with a flash point of 64°F (18°C). Reactivity Hazards: None. Environmental Hazards: The environmental effects of this product have not been investigated, however release may cause long term adverse environmental effects.

US DOT Symbols


2 444 Richmond Ave | Kansas City, KS | 66101 www.specchemllc.com | 816-968-5600

Follow us


EU and GHS Symbols Signal Word


2.1 EU Labeling and Classification: This product meets the definition of a hazardous substance or preparation as defined by the European Union Council Directives 67/548/EEC, 1999/45/EC, 1272/2008/EC and subsequent Directives. EU HAZARD CLASSIFICATION OF INGREDIENTS PER DIRECTIVE 1272/2008/EC: Index Number: 265-199-0 is listed in Annex I 649-356-00-4 208-760-7 is listed in Annex I 601-029-00-7 247-977-1 is not listed in Annex I Substances not listed either individually or in group entries must be self classified.

facebook.com/specchemllc twitter.com/specchemllc

1511 Baltimore Ave, Suite 600 | Kansas City, MO 64108 | P. 816.968.5600 F. 816.561.4029 | www.specchemllc.com

Profile for Jessie McNellis

SpecTech 2015 May - GHS Conversion  

SpecTech 2015 May - GHS Conversion

SpecTech 2015 May - GHS Conversion  

SpecTech 2015 May - GHS Conversion

Profile for specchem