EM–162
1NZ-FE ENGINE MECHANICAL – ENGINE UNIT
(c) Remove the 2 O-rings from the cylinder block and oil pan sub-assembly.
A116556
20. REMOVE OIL PUMP SEAL (a) Using a screwdriver with its tip wrapped in tape, remove the oil seal.
Wooden Blocks
EM
A035281E04
21. REMOVE CHAIN TENSIONER ASSEMBLY NO. 1 NOTICE: • Do not rotate the crankshaft with the chain tensioner removed. • When rotating the camshaft with the timing chain removed, rotate the crankshaft counterclockwise 40° from the TDC first. (a) Pull up the stopper plate and hold it with its lock released.
Stopper Plate A116564E01
(b) Unlock the plunger of the tensioner and push it in to the end.
Plunger A116565E01