Page 6

LINE ARRAY SYSTEM

Key Features:

Completely Manufactured in Italy · 2 way Bi-Amped powered & processed line array · 12” B&C high excursion neodymium magnet woofer & three 1.7” diaphram HF drivers with 1” driver exits coupled to three waveguides with 100° H x 15° V (QSA112a) or 5° V (QSA112.0a) dispersion. · 1100w Class D LF power amplifier + 300w Class G HF power amplifier, 139 dB peak SPL (single cabinet) · Switch mode power supply . DSP controller with 8 factory EQ presets to configure the system and 8 delay line settings · Cabinet constructed with 18 mm (3/4”) 13 ply Baltic birch plywood, that is also internally braced to prevent undesired resonance. · Cabinet features a scratch & scuff resistant black paint finish. · Two ergonomically positioned carrying handles and mechanical hardware for suspension with a 10:1 safety factor built into the cabinet.

QSA 112A Powered Constant Curvature Line Array speaker

QSA 112A Technical Specifications: Configuration Built-in amplifier cont. rms LF/HF Built-in amplifier max. rms LF/HF Frequency response Low frequency woofer High frequency driver Maximum SPL cont/peak Dispersion AC Power requirements Power cord Net dimensions (WxHxD)

way W W @-6dB inch inch dB HxV VA m mm inch

Net weight

kg/lb

2 800/200 1100/300 60Hz - 20KHz 12 - 3 coil - neodymium 3x1 - 1.7 coil - neodymium 129 / 139 100° x 5° 800 5 mm 382 x 605 x 455 (5"x23,6"x17,9") Kg 33,5/lbs 73,75

5

Catalogue Qube 2013  

Catalogue Qube 2013

Catalogue Qube 2013  

Catalogue Qube 2013

Advertisement