Page 1


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption



Ethernet over VDSL




Rugged Operating System™


„„ 2 Serial and/or 2 Fast Ethernet Ports „„ RS485/RS422/RS232 Serial Ports (DB9 or RJ45) Rugged Operating „„ System™ Serial Fiber Interface (ST) available Zero-Packet-Loss™ Zero-Packet-Loss™ „„ 10/100BaseTX or 100BasesFX Ethernet ports



Ethernet Over VDSL Port Characteristics:

The RuggedSwitch® RS910L is an industrially hardened serial device server and managed Ethernet switch supporting Ethernet over VDSL (EoVDSL). The RS910L can be configured with 2 serial ports (RS485/RS422/RS232) and/or 2 Ethernet ports (copper of fiber). The RS910L can interconnect multiple types of intelligent electronic devices (IEDs) that have different methods of communications. The EoVDSL port allows for aggregation of these devices at a remote location back to the central control room using existing telephone grade cable (or other legacy serial cabling). The EoVDSL uplink allows up to 5km LAN segments at up to 35Mbps. It is the perfect solution for bringing Ethernet networking to serial devices and applications where existing wiring is already present thus saving the considerable cost of upgrading existing legacy devices or installing new network cabling. Designed to operate reliably in harsh industrial environments the RS910L provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in curb side traffic control cabinets. An operating temperature range of -40°C to +85°C coupled with hazardous location certification, optional conformal coating and a galvanized steel enclosure allows the RS910L to be placed in almost any location. The RS910L is packaged in a compact, galvanized steel enclosure that allows either DIN or panel mounting for efficient use of cabinet space. The RS910L provides an integrated power supply with a wide range of voltages (88-300VDC or 85-264VAC) for worldwide operability or dual-input, reversible polarity, 12VDC, 24VDC and 48VDC power supply inputs for high availability applications requiring backup power inputs. The RS910L’s superior ruggedized design coupled with the embedded Rugged Operating System (ROS®) provides improved system reliability and advanced networking features making it ideally suited for creating Ethernet networks for mission-critical, real-time, control applications. All RuggedCom products are backed by a five year warranty and unsurpassed technical support.

Features and Benefits Interface Ports

„„ 1 Ethernet over VDSL (EoVDSL) interface

Rugged Operating

„„ System™ Up to 5km LAN segments „„ Symmetric data rates up to 35Mbps „„ Asymmetric data rates up to 40Mbps „„ Automatically selects fastest data rate based on distance and quality of cable „„ Software selectable to be master or slave „„ Frequency Division Multiplexing (FDM)

Cyber Security Features

„„ Multi-level user passwords „„ SSH/SSL (128-bit encryption) „„ Enable/disable ports, MAC based port security „„ Port based network access control (802.1x) „„ VLAN (802.1Q) to segregate and secure network traffic „„ R ADIUS centralized password management „„ SNMPv3 authentication and 56-bit encryption

RuggedRated™ for Reliability in Harsh Environments

„„ Immunity to EMI and heavy electrical surges zz Meets IEEE 1613 (electrical utility substations) zz Exceeds IEEE 61850-3 (electrical utility substations) zz Exceeds IEC 61800-3 (variable speed drive systems) zz Exceeds IEC 61000-6-2 (generic industrial) zz Exceeds NEMA TS-2 (traffic control equipment) „„ -40 to +85°C operating temperature (no fans) „„ 20 AWG galvanized steel enclosure „„ DIN or panel mounting options provide secure mechanical reliability „„ Hazardous Locations: Class 1, Division 2

Rugged Operating System (ROS®) Features

„„ Simple plug and play operation - automatic learning, negotiation, and crossover detection „„ MSTP (802.1Q - 2005, formerly 802.1s) „„ RSTP (802.1D-2004) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5ms) „„ Quality of Service (802.1p) for real-time traffic „„ VLAN (802.1Q) with double tagging and GVRP support „„ Link aggregation (802.3ad) „„ IGMP Snooping for multicast filtering „„ Port Rate Limiting and Broadcast Storm Limiting „„ Port configuration, status, statistics, mirroring, security „„ SNTP time synchronization (client and server)

Universal Power Supply Options

„„ Fully integrated power supply (no external adaptors) „„ Universal high-voltage range: 8-300VDC or 85-264VAC „„ Dual low-voltage DC inputs: 24VDC (10-36VDC) or 48VDC (36-72VDC) „„ Terminal blocks for reliable maintenance free connections „„ RUGGEDCOM CSA/UL 60950 safety approved to +85°C


RuggedSwitch® RS910L


RuggedSwitch速 RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

RuggedSwitch速 RS910L EoVDSL Port XXOne EoVDSL port standard XXRJ11 connector XXSymmetrics data rates up to 35Mbps

Ethernet Ports: XX2 10/100BaseTX or 100BaseFX XXFiber Optical (MMF/SMF) XXMultiple Fiber Connector Types

Rugged Construction: XX20 AWG. galvanized steel enclosure XXConformal coating (optional)

Serial Ports: XX2 RS485/RS422/RS232 XXDB9 or RJ45 XXUp to 230kbp XXSerial Fiber Interface Option

Operating Temperature XX-40oC to +85oC XXNo Fans

Integrated Power Supply XXUniversal high-voltage range: 88-300VDC or 85 - 264VAC XXPopular low voltage DC ranges: 24VDC, 48VDC XXDual Isolated DC power inputs

Mounting Options XXDin Rail XXPanel Mount

Critical Alarm Relay XXForm-C failsafe contact relay: 1A@30VDC

RuggedSwitch速 RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

Network Architecture Control Room




Up to 40Mbps Up to 5km




Up to 40Mbps Up to 5km

Up to 100Mbps Up to 90km




VoIP Phone

IED Video

VDSL Serial

VoIP Phone


IED Video

Serial Serial



NOTE: Call for availability for the RS910L, RS920L and RS930L products.


8 Port Managed Switch with Ethernet over VDSL Uplink „„ 1 Ethernet over VDSL interface „„ Up to 8 fast Ethernet ports „„ Copper and fiber options „„ Use to aggregate Ethernet enabled devices at remote locations back to a central point




„„ 1 Ethernet over VDSL interface „„ 2 RS485/RS422/RS232 Serial ports (DB9 or RJ45) „„ Optional 2 Ethernet ports – copper of fiber „„ Use to network enable legacy serial devices at remote locations

„„ 2 Ethernet over VDSL interfaces „„ 2 RS485/RS422/RS232 Serial ports (DB9 or RJ45) „„ Use as a serial drop point for a ring or busnetwork topology

„„ 2 Ethernet over VDSL interfaces „„ 6 Port Managed Ethernet Switch - copper interfaces „„ Use as an Ethernet drop point for a ring or bus network topology „„ Span over hundreds of kilometers using existing telephone grade cables

Serial and Ethernet Device Server with Ethernet over VDSL Uplink

Dual Port Ethernet over VDSL with Integrated Dual Port Serial Server

6 Port Managed Switch with Dual Port Ethernet over VDSL Uplink

RuggedSwitch® RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

ROS® Features Cyber Security

Cyber security is an urgent issue in many industries where advanced automation and communications networks play a crucial role in mission critical applications and where high reliability is of paramount importance. Key ROS ® features that address security issues at the local area network level include: „„ Passwords - Multi-level user passwords secures switch against unauthorized configuration „„ SSH / SSL - Extends capability of password protection to add 128-bit encryption of passwords and data as they cross the network „„ Enable / Disable Ports - Capability to disable ports so that traffic can not pass „„ 802.1Q VLAN - Provides the ability to logically segregate traffic between predefined ports on switches „„ MAC Based Port Security - The ability to secure ports on a switch so only specific Devices / MAC addresses can communicate via that port „„ 802.1x Port Based Network Access Control - The ability to lock down ports on a switch so that only authorized clients can communicate via this port „„ R ADIUS - authentication service using MD5 hash and providing centralized password management „„ SNMPv3 - encrypted authentication access security and data encryption (CBC-DES with 56-bit encryption key) „„ Secure Socket Layer - Web-based management using SSL with data encryption (128-bit encryption key) „„ RSA – 1024 bit key for key management and key exchange „„ TACACS+ - Terminal Access Control and Accounting Services Client provides encrypted authentication and authorization „„ Point to Point (PPP) - using CHAP (MD5 Hash) authentication service „„ SFTP - Secure File Transfer Protocol using SSH encryption

The ROS ® cyber security features are included to helpaddress the various industry specific security standards such as NERC CIP, ISA S99, AGA 12, IEC 62443, ISO 17799:2005 and PCSRF SPP-ICS.

Enhanced Rapid Spanning Tree Protocol (eRSTP™)

RuggedCom eRSTP™ allows the creation of fault-tolerant ring and mesh Ethernet networks that incorporate redundant links that are ‘pruned’ to prevent loops. eRSTP™ yields worstcase fault recovery of 5ms times the ‘bridge diameter’ and allows rings of up to 160 switches. For example, a ring of ten switches will have fault recovery times under 50ms. eRSTP™ implements both STP and RSTP to ensure interoperability with commercial switches unlike other proprietary ‘ring’ solutions. 1

Quality of Service (IEEE 802.1p)

Some networking applications such as real-time control or VoIP (voice over IP) require predictable arrival times for Ethernet frames. Switches can introduce latency in times of heavy network

traffic due to the internal queues that buffer frames and then transmit on a first come first serve basis. ROS ® supports ‘Class of Service’ in accordance with IEEE 802.1p that allows time critical traffic to jump ahead to the front of the queue thus minimizing latency and reducing jitter to allow such demanding applications to operate correctly. ROS ® allows priority classification by port, tags, MAC address, and IP type of service (ToS). A configurable “weighted fair queuing” algorithm controls how frames are emptied from the queues.

VLAN (IEEE 802.1Q)

Virtual local area networks (VLAN) allow the segregation of a physical network into separate logical networks with independent broadcast domains. A measure of security is provided since hosts can only access other hosts on the same VLAN and traffic storms are isolated. ROS ® supports 802.1Q tagged Ethernet frames and VLAN trunks. Port based classification allows legacy devices to be assigned to the correct VLAN. GVRP support is also provided to simplify the configuration of the switches on the VLAN.

Link Aggregation (802.3ad)

The link aggregation feature provides the ability to aggregate several Ethernet ports into one logical link (port trunk) with higher bandwidth. This provides an inexpensive way to set up a high speed backbone to improve network bandwidth. This feature is also known as “port trunking”, “port bundling”, “port teaming”, and “Ethernet trunk”.

IGMP Snooping

ROS® uses IGMP snooping (Internet Group Management Protocol v1&v2) to intelligently forward or filter multicast traffic streams (e.g. MPEG video) to or from hosts on the network. This reduces the load on network trunks and prevents packets from being received on hosts that are not involved. ROS® has a very powerful implementation of IGMP snooping that: „„ Can be enabled on a per VLAN basis. „„ Detects and filters all multicast streams regardless of whether subscribers exist. „„ S upports “router-less” operation by supporting an

“active” mode.

„„ Restores traffic streams immediately after an RSTP topology change.

SNMP (Simple Network Management Protocol)

SNMP provides a standardized method for network management stations the ability to interrogate devices from different vendors. SNMP versions supported by ROS ® are v1, v2c, and v3. SNMPv3 in particular provides security features such as authentication, privacy with data encryption (CBC-DES with 56-bit encryption key) and access control not present in earlier SNMP versions. ROS ® also supports numerous standard MIBs (Management Information Base) allowing for easy integration with any network

RuggedSwitch® RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

ROS® Features management system (NMS). A feature of SNMP supported by ROS® is the ability to generate “traps” upon system events. RuggedNMS™, the RuggedCom management solution, can record traps from multiple devices providing a powerful network troubleshooting tool. It also provides a graphical visualization of the network and is fully integrated with all RuggedCom products. 1 eRSTP fault recovery times may be approximated as follows:

For 100 Mbps, fault recovery performance is <5ms/hop

For 1,000 Mbps, fault recovery performance is <5ms/hop + 20ms

SCADA and Industrial Automation

ROS ® contains features that optimize network performance and simplify switch management based on the unique requirements found in SCADA and industrial automation applications. Features such as Modbus TCP management for retrieval of switch data using the ubiquitous Modbus protocol and DHCP Option 82, a Rockwell Automation ODVA requirement for IP address assignment based on the location of the end device, provide capabilities not found in typical “commercial” or “office grade” Ethernet switches.

Port Based Network Access Control (802.1x)

ROS ® supports the IEEE 802.1x standard that defines a mechanism for port-based network access control which provides a means of authenticating and authorizing devices attached to LAN ports.

Port Rate Limiting

ROS ® supports configurable rate limiting per port to limit unicast and multicast traffic. This can be essential to managing precious network bandwidth for service providers.It also provides edge security for denial of service (DoS) attacks.

Broadcast Storm Filtering

Broadcast storms wreak havoc on a network and can cause attached devices to malfunction. This could be disastrous on a network with mission critical equipment. ROS ® limits this by filtering broadcast frames with a user-defined threshold.

Port Statistics and RMON (Remote Monitoring)

ROS ® provides continuously updating statistics per port that provide both ingress and egress packet and byte counters as well as detailed error figures. Also provided is full support for the RMON statistics, history, alarms, and event groups. RMON allows for very sophisticated data collection, analysis and detection of traffic patterns.

Event Logging and Alarms

ROS ® records all significant events to a non-volatile system log allowing forensic troubleshooting. Events include link failure and recovery, unauthorized access, broadcast storm detection, and self-test diagnostics among others. Alarms provide a snapshot of recent events that have yet to be acknowledged by the network administrator. An external hardware relay is de-energized during the presence of critical alarms allowing an external controller to react if desired.

HTML Web Browser and Telnet User Interfaces

ROS ® provides a simple, intuitive user interface for configuration and monitoring via a standard graphical web browser or via Telnet. All system parameters include detailed on-line help to make setup a breeze. ROS ® , presents a common look and feel and standardized configuration process allowing easy migration to other RuggedCom managed products.

Configuration via ASCII Text File

All configuration parameters are stored in an ASCII formatted text file that can easily be transferred via TFTP or Xmodem. The configuration file can be saved for backup purposes and easily manipulated by a text editor. The same text file can be downloaded to the switch at a later date in order to re-configure or restore a previous configuration.

Command Line Interface (CLI)

A command line interface can be used in conjunction with remote shell to automate data retrieval, configuration updates, and firmware upgrades. A powerful SQL-like capability allows expert users the ability to selectively retrieve or manipulate any parameters the device has to offer.

Port Mirroring

ROS ® can be configured to duplicate all traffic on one port to a designated mirror port. When combined with a network analyzer, this can be a powerful troubleshooting tool. Port Configuration and Status ROS ® allows individual ports to be ‘hard’ configured for speed, duplex, auto-negotiation, flow control and more. This allows proper connection with devices that do not negotiate or have unusual settings. Detailed status of ports with alarm and SNMP trap on link problems aid greatly in system troubleshooting.

RuggedSwitch® RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

EMI and Environmental Type Tests IEC 61850-3 EMI TYPE TESTS TEST


IEC 61000-4-2


IEC 61000-4-3

Radiated RFI

Test Levels Enclosure Contact Enclosure Air Enclosure ports Signal ports

IEC 61000-4-4

Burst (Fast Transient)

IEC 61000-4-6

Induced (Conducted) RFI

IEC 61000-4-8 IEC 61000-4-29


A.C. Power ports

+/- 4kV


+/- 4kV


+/- 4kV line-to-earth, +/- 2kV line-to-line +/- 2kV line-to-earth, +/- 1kV line-to-line +/- 4kV line-to-earth, +/- 2kV line-to-line

4 3 4

Signal ports


3 3

D.C Power ports


A.C. Power ports



Earth ground ports



8 Magnetic Field

Enclosure ports D.C. Power ports

Voltage Dips & Interrupts

A.C. Power ports

IEC 61000-4-11 IEC 61000-4-12

Damped Oscillatory

IEC 61000-4-16

Mains Frequency Voltage

IEC 61000-4-17

Ripple on D.C. Power Supply

IEC 60255-5

Dielectric Strength

IEC 60255-5

H.V. Impulse

Note 1

+/- 4kV

Signal ports D.C. Power ports A.C. Power ports


+/- 4kV @ 2.5kHz

D.C. Power ports

Earth ground ports IEC 61000-4-5

Severity Levels 4 4 Note 1

+/- 8kV +/- 15kV 20 V/m

Signal ports D.C. Power ports A.C. Power ports Signal ports D.C. Power ports D.C. Power ports Signal ports D.C. Power ports A.C. Power ports Signal ports D.C. Power ports A.C. Power ports

40 A/m continuous, 1000 A/m for 1 s 1000 A/m for 1 s

Note 1 5

30% for 0.1s, 60% for 0.1s, 100% for 0.05s


30% for 1 period, 60% for 50 periods


100% for 5 periods, 100% for 50 periods


2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 30V Continuous, 300V for 1s 30V Continuous, 300V for 1s 10% 2kVac (Fail-Safe Relay output) 1.5kV DC 2kVac 5kV (Fail-Safe Relay output) 5kV 5kV

3 3 3 4 4 3 N/A N/A N/A N/A N/A N/A



IEEE C37.90.3


IEEE C37.90.2

Radiated RFI

IEEE C37.90.1

Fast Transient

IEEE C37.90.1


IEEE C37.90

H.V. Impulse

IEEE C37.90

Dielectric Strength

Enclosure Contact Enclosure Air Enclosure ports Signal ports D.C. Power ports A.C. Power ports Earth ground ports3 Signal ports D.C. Power ports A.C. Power ports Signal ports D.C. Power ports A.C. Power ports Signal ports D.C. Power ports A.C. Power ports

Test Levels +/-2kV, +/-4kV, +/- 8kV +/-4kV, +/-8kV, +/-15kV 35 V/m +/- 4kV @ 2.5kHz +/- 4kV +/- 4kV +/- 4kV 2.5kV common mode @1MHz 2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 5kV (Fail-Safe Relay output) 5kV 5kV 2kVac 1.5kV DC 2kVac

Environmental Type Tests Test IEC 60068-2-1

Description Cold Temperature

Test Ad

Test Levels -40°C, 16 Hours

IEC 60068-2-2

Dry Heat

Test Bd

+85°C, 16 Hours

IEC 60068-2-30

Humidity (Damp Heat, Cyclic)

Test Db

95% (non-condensing), 55°C , 6 cycles

IEC 60255-21-1 IEC 60255-21-2

Vibration Shock

2g @ (10 - 150) Hz 30g @ 11mS

Notes: 1. Ruggedcom specified severity levels

2. Meets Class 2 requirements for an all fiber configuration. Class 1 for copper ports.

RuggedSwitch® RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

Technical Specifications Power Supply

„„ Power Consumption: 10W Max „„ 24VDC: 10-36VDC, 0.4A „„ 48VDC: 36-72VDC, 0.2A „„ HI Voltage AC/DC: 88-300VDC, 85-264VAC, 0.1A

Critical Alarm Relay

„„ Form-C failsafe contact relay: 1A@30VDC


„„ Height: 7.4” / 18.8cm „„ Width: 2.6” / 6.6cm „„ Depth: 5.0” / 12.7cm „„ Weight: 2.7lbs / 1.22kg „„ Ingress Protection: IP40 (1mm objects) „„ Enclosure: 20 AWG galvanized steel enclosure „„ Mounting: DIN rail or panel mounted

Switch Properties

„„ Switching method: Store & Forward „„ Switching latency: 8 us (100Mbps) „„ Switching bandwidth: 1.8Gbps „„ MAC address table size: 16kbytes „„ Priority Queues: 4 „„ Frame buffer memory: 1 Mbit „„ Simultaneous VLANs: 255 „„ VLAN ID Range: 1 to 4094 „„ IGMP and static multicast groups: 256 „„ Port rate limiting: 128kbps, 256, 512, 4, 8Mbps „„ No head of line blocking


„„ ISO: Designed and manufactured using a ISO9001: 2000 certified quality program „„ CE Marking „„ Emissions: FCC Part 15 (Class A), EN55022 (CISPR22 Class A) „„ Safety: cCSAus (Compliant with CSA C22.2 No. 60950, UL 60950, EN60950) „„ Laser Eye Safety (FDA/CDRH): Complies with 21 CFR Chapter1, Subchapter J. „„ Hazardous Locations: Class 1, Division 2

EMI Immunity and Environmental Compliance

„„ IEC 61000-6-2 Industrial (Generic) „„ IEC 61800-3 Industrial (Variable Speed Drive Systems) „„ IEC 61850-3 Electric Utility Substations „„ IEEE 1613 Electric Utility Substations „„ NEMA TS 2 Traffic Control Equipment

Network Management

„„ HTTP graphical web-based, SSL (128-bit encryption) „„ SNMP v1, v2c, v3 (56-bit encryption) „„ Telnet, VT100, SSH/SFTP (128-bit encryption) „„ Command Line Interface (CLI) „„ RSA Key Management (1024 bit key) „„ Authentication and Accounting - TACACS+ (encrypted), RADIUS client, PPP


„„ 5 Years-Applicable to design or manufacturing related product defects.

IEEE Compliance

„„ 802.3-10BaseT „„ 802.3u-100BaseTX, 100BaseFX „„ 802.3x-Flow Control „„ 802.3z-1000BaseLX „„ 802.3ab-1000BaseTX „„ 802.3ad-Link Aggregation „„ 802.1D-MAC Bridges „„ 802.1D-Spanning Tree Protocol „„ 802.1p-Class of Service „„ 802.1Q-VLAN Tagging „„ 802.1D-2004 -Rapid Spanning Tree Protocol „„ 802.1x-Port Based Network Access Control „„ 802.1Q-2005 (formerly 802.1s) MSTP

IETF RFC Compliance

„„ RFC768-UDP „„ RFC783-TFTP „„ RFC791-IP „„ RFC792-ICMP „„ RFC793-TCP „„ RFC826-ARP „„ RFC854-Telnet „„ RFC894-IP over Ethernet „„ RFC1112-IGMP v1 „„ RFC1519-CIDR „„ RFC1541-DHCP (client) „„ RFC2030-SNTP „„ RFC2068-HTTP „„ RFC2236-IGMP v2 „„ RFC2284-EAP „„ RFC2475-Differentiated Services „„ RFC2865-RADIUS „„ RFC3414-SNMPv3-USM „„ RFC3415-SNMPv3-VACM


„„ RFC1493-BRIDGE-MIB „„ RFC1907-SNMPv2-MIB „„ RFC2012-TCP-MIB „„ RFC2013-UDP-MIB „„ RFC2578-SNMPv2-SMI „„ RFC2579-SNMPv2-TC „„ RFC2819-RMON-MIB „„ RFC2863-IF-MIB „„ draft-ietf-bridge-rstpmib-03-BRIDGE-MIB „„ draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB „„ IANAifType-MIB

RuggedSwitch® RS910L


RuggedSwitch速 RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

Fiber Specifications and Mechanical Drawing Parameter Mode Connectors Typical Dist. (km) Optical Wavelength (nm) Cable SizeCore/Cladding (um) Tx Power (dBm) Rx Sensitivity (dBm) Typical Budget (dB)

Fiber Optical Specifications Fiber Port Type Multimode MTRJ / ST / SC 2 1310 50 or 62.5/125 -15.7 -33.5 17

Singlemode LC / SC / ST 50 1310 8 or 9/125 -2.5 -37 34.5


-15.5 -32 16.5


2.5 -39 41.5



7.44 6.73

Longer segment lengths dependent on fiber specifications. Consult factory for further details.

RuggedSwitch速 RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

Order Codes RS910L  - ______ - ___ - ____ - ____ - ____ - _____ PS M S E VV MOD Base Unit includes One Ethernet over VDSL interface

PS: Power Supply

„„ 24 = 24VDC (10-36VDC) „„ 48 = 48VDC (36-72VDC) „„ HI = 87-264VAC or 88-300VDC

M: Mounting Option

„„ D = DIN Rail „„ P = Panel Mount „„ N = None

S: Serial Port Options

„„ XX = None „„ S1 = 2 x RS232/422/485 DB9 „„ S2 = 2 x RS232/422/485 RJ45 „„ S3 = 2 x Fiber 850nm ST

E: Additional Ethernet Ports

„„ X XXX = No Ethernet Ports „„ T X01 = 2 x 10/100TX RJ45 „„ FL01 = 2 x 10FL - Multimode, 850 nm, ST connectors „„ FX01 = 2 x 100FX - Multimode, 1300 nm, ST connectors „„ FX02 = 2 x 100FX - Multimode, 1300 nm, SC connectors „„ FX03 = 2 x 100FX - Multimode, 1300 nm, MTRJ connectors „„ FX11 = 2 x 100FX - Multi mode, 1300nm, LC connectors „„ FX04 = 2 x 100FX - Singlemode, 1300 nm, ST connectors, 20km „„ FX05 = 2 x 100FX - Singlemode, 1300 nm, SC connectors, 20km „„ FX06 = 2 x 100FX - Singlemode, 1300 nm, LC connectors, 20km „„ FX07 = 2 x 100FX - Singlemode, 1300 nm, SC connectors, 50km „„ FX08 = 2 x 100FX - Singlemode, 1300 nm, LC connectors, 50km „„ FX09 = 2 x 100FX - Singlemode, 1300 nm, SC connectors, 90km

VV: VDSL Interface

„„ V1 = Standard reach (<2.5km) „„ V2 = Long Reach (5km) Master / CO „„ V3 = long Reach (5km) /CPE

Power Cables

„„ 43-10-0008 - Bare-wire „„ 43-10-0007 - with lugs

MOD: Manufacturing Modifications „„ XX = None „„ C01 = Conformal Coating

RuggedSwitch® RS910L


RuggedSwitch® RS910L Serial and Ethernet Device Server with Ethernet over VDSL Uplink, 128-bit Encryption

RuggedCom Inc.

300 Applewood Crescent, Unit 1, Concord, Ontario, Canada  L4K 5C7 Tel:  +1 (905) 856-5288  Fax:  +1 (905) 856-1995 Toll Free:  1 (888) 264-0006

Technical Support Center

Toll Free (USA & Canada):  1 (866) 922-7975 International:  +1 (905) 856-5288 USA:  +1 (954) 922-7975 E-mail: © 2010 RuggedCom Inc. RuggedSwitch is a registered trademark of RuggedCom Inc. Ethernet is a trademark of the Xerox Corporation. Patent Pending All specifications in this document are subject to change without notice. Rev 1l — 04/27/10

For additional information on our products and services, please visit our web site at:

RuggedSwitch® RS910L


Rs910l c datasheet rev1l  
Read more
Read more
Similar to
Popular now
Just for you