John Deere 6622 COMBINE Parts Catalog Manual

1A2 6622 COMBINE

H33992

-UN-01JAN94

JOHN DEERE 6622 COMBINE

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

6622 COMBINE PC1746

(17-DEC-81)

10-1

PN=1

1A3 6622 COMBINE

NOTE IN ADDITION TO TITAN COMBINES, PARTS INFORMATION FOR TITAN II COMBINES IS ALSO LOCATED IN THIS CATALOG. SERIAL NUMBER (610401) INDICATES TITAN II PARTS.

IMPORTANT THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 6622 COMBINE. MACHINE VINTAGE IS DETERMINED BY THE SERIAL NUMBER OR THE PRODUCT IDENTIFICATION NUMBER (PIN).

IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

SERIAL NUMBER AND PRODUCT IDENTIFICATION NUMBER (PIN) PLATES USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON THE SERIAL NUMBER PLATE OR THE PRODUCT IDENTIFICATION NUMBER PLATE IN WARRANTY CORRESPONDENCE. COMBINES (

-556000)

ON THESE COMBINES, THE SERIAL NUMBER PLATE IS LOCATED ON THE REAR LEFT-HAND UPRIGHT. AN EXAMPLE OF THE SERIAL NUMBER ON THIS PLATE IS: E6622556000H E - EQUIPMENT 6622 - COMBINE MODEL 556000 - COMBINE SEPARATOR SERIAL NUMBER H - MANUFACTURING UNIT (HARVESTER WORKS) COMBINES (556001-

)

ON THESE COMBINES, THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT-HAND SIDE OF THE TOOL BOX. AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS: H06622X556001 COMBINE (FIRST LINE) H0 - MANUFACTURING UNIT (HARVESTER WORKS) 6622 - MODEL IDENTIFIER X - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 556001 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN (SECOND LINE) COMBINE - TYPE OF PRODUCT

10-2

6622 COMBINE PC1746

(16-OCT-86) PN=2

1A4 6622 COMBINE

ENGINE SERIAL NUMBER THE ENGINE SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE ENGINE BLOCK. ENGINES (

-227599)

AN EXAMPLE OF THE ONE-LINE, SIXTEEN-DIGIT NUMBER ON THIS SERIAL NUMBER PLATE IS: 6466TH01227599RG 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT T - FUEL TYPE (TURBOCHARGED DIESEL) H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS) 01 - ENGINE VERSION 227599 - ENGINE SERIAL NUMBER RG - MANUFACTURING UNIT OF ENGINE (JOHN DEERE ENGINE WORKS) ENGINES (227600-

)

AN EXAMPLE OF THE TWO-LINE NUMBER ON THIS SERIAL NUMBER PLATE IS: RG6466227600 6466TH05 (FIRST LINE) RG - MANUFACTURING UNIT (JOHN DEERE ENGINE WORKS) 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT A - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 227600 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN (SECOND LINE) 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT T - FUEL TYPE (TURBOCHARGED DIESEL) H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS) 05 - ENGINE VERSION

PARTS LISTING INFORMATION SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES A PART MAY BE USED. FOR EXAMPLE: -

THE PART CAN BE USED ON ALL MACHINES.

-000000 000000000000-000000

THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER WAS MADE, BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED.

6622 COMBINE PC1746

(03-APR-85)

10-3

PN=3

1A5 6622 COMBINE

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION WILL BE FOUND IMMEDIATLEY FOLLOWING THE STORY IN WHICH IT IS USED. THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER PARTS SHOWN IN PHANTOM FOR RELATIONSHIP.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-MATIC™ HARVESTRAK™

TORQ-GARD SUPREME® QUIK-TATCH™

CHANGE INDICATOR LINE CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

10-4

6622 COMBINE PC1746

(03-APR-85) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

1A6 6622 COMBINE

SECTIONAL INDEX SECTION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BASIC ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 FUEL AND AIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 POWER TRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 STEERING AND BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SEPARATOR SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 OPERATOR’S STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 CUTTING PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 FEEDER HOUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 SEPARATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 GRAIN TANK AND UNLOADING AUGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 MAJOR DRIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 LEVELING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 DECALS, BELTS AND CHAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

6622 COMBINE PC1746

(03-APR-85)

10-5

PN=5

6622 COMBINE MEMORANDA

10-6

6622 COMBINE PC1746

(03-APR-85) PN=6

1A7 6622 COMBINE ALPHABETICAL INDEX GRID

PAGE

A 1H21 1H2 4I23 4G19 4F6 2I22 1E23 1F4 3D13 3E4 3D17 3D25 3E4 3D13 3D13 3E3 3D12 1F3 1F5 3D9 1J5 1J5 1J3 1J4 1I24 1I25 1J1 1I22 1I22 3F2 1I23 5C9 2G16 3F19 4I23 3F6 4C12 2F7 3G10 3F20 3F23 2F7 4I21 4G14 1J7 3C20 2F7 2F7 3E17 3F24 1C15 3C23 1F6 4G15 4H7 4H15 4H13 3G21 3H2 3G23 3G23 3G20 4I5 3G23 3G23

ACCESSORIES, PANEL, INSTRUMENT ............................

ACTUATOR, LOW SHAFT SPEED MONITORS ................

ADAPTER, DECLUTCHING IDLER ......................................

ADAPTER, R.H. SIDE LUBE BANK SYSTEM ....................

ADJUSTING BRACKET,CL.GRAIN LOWER ELEV. ............

ADJUSTING SCREW KIT ....................................................

AID, COLD WEATHER STARTING ......................................

AIR CLEANER ......................................................................

AIR CONDITIONER BELT ....................................................

AIR CONDITIONER EXPANSION VALVE............................

AIR CONDITIONER HI PRESSURE SWITCH ....................

AIR CONDITIONER LINES AND CONDENSER..................

AIR CONDITIONER LINES AND EVAPORATOR................

AIR CONDITIONER PULLEY................................................

AIR CONDITIONING COMPRESSOR ..................................

AIR CONDITIONING KIT, O-RING ......................................

AIR FILTER, CAB..................................................................

AIR INTAKE TUBES..............................................................

AIR INTAKE TUBES-AIR CLEANER TO MANIFOLD..........

AIR LOUVER AND PANEL ..................................................

ALTERNATOR ADJUSTING STRAP ....................................

ALTERNATOR BRACKET ....................................................

ALTERNATOR SHEAVE AND BELT....................................

ALTERNATOR, COMPLETE, 90 AMP ................................

ALTERNATOR, 72 AMP........................................................

ALTERNATOR, 72 AMP........................................................

ALTERNATOR, 90 AMP........................................................

AM PUSH-BUTTON RADIO ..................................................

AM-FM PUSH-BUTTON RADIO............................................

ANGLES, CUTTING PLATFORM ........................................

ANTENNA, RADIO ................................................................

ARM AND MOUNTING (AUTO.LEVELING CONTROL) ......

ARM SUPPORT, MAIN HYDRAULIC PUMP TORQUE ......

ARM, BAT REEL DR.............................................................

ARM, DECLUTCHING IDLER ..............................................

ARM, DRIVE, CUTTERBAR..................................................

ARM, DUAL-RANGE CYLINDER DRIVE ............................

ARM, L.H., REAR AXLE CONTROL ....................................

ARM, LIFTING GUARDS ......................................................

ARM, PICKUP REEL ............................................................

ARM, PICKUP REEL ECCENTRIC SPIDER........................

ARM, R.H., REAR AXLE CONTROL....................................

ARM,IDLER,SECONDARY CTRSHAFT DRIVE IDLER ......

ARM,LOWER TAILINGS AUGER DRIVE TIGHTENER ......

ARMATURE, STARTER ........................................................

ARMREST..............................................................................

ARMS, CENTER, REAR AXLE CONTROL..........................

ARMS, CONTROL, REAR AXLE ..........................................

ARMS, REEL SUPPORT ......................................................

ARMS, REEL SUPPORT ......................................................

ARMS, ROCKER ..................................................................

ASH TRAY ............................................................................

ASPIRATOR ..........................................................................

AUGER AND HOUSING, UPPER TAILINGS ......................

AUGER CONTROL LEVER, UNLOADING ..........................

AUGER COVERS, GRASS SEED UNLOADING ................

AUGER COVERS,GRAIN TANK INNER UNLOADING ......

AUGER DRIVE AND KNIFE DRIVE SHAFTS ....................

AUGER DRIVE BRACKETS..................................................

AUGER DRIVE CARRIER, PLATFORM ..............................

AUGER DRIVE CHAIN, PLATFORM....................................

AUGER DRIVE DRIVE LINE ................................................

AUGER DRIVE GEAR CASE,HORIZONTAL UNLDG. ........

AUGER DRIVE HUB, PLATFORM ......................................

AUGER DRIVE JAW, PLATFORM ......................................

6622 COMBINE PC1746

(16-OCT-86)

40 - 35 40 - 15 140 - 15 120 - 142 120 - 103 70 - 85 30 - 9 30 - 15 90 - 35 90 - 53 90 - 39 90 - 49 90 - 53 90 - 35 90 - 35 90 - 52 90 - 34 30 - 14 30 - 16 90 - 31 40 - 70 40 - 70 40 - 68 40 - 69 40 - 64 40 - 65 40 - 66 40 - 61 40 - 61 100 - 19 40 - 63 150 - 31 70 - 29 100 - 37 140 - 15 100 - 23 120 - 30 60 - 34 100 - 55 100 - 39 100 - 42 60 - 34 140 - 13 120 - 137 40 - 72 90 - 17 60 - 34 60 - 34 100 - 9 100 - 43 20 - 34 90 - 20 30 - 17 120 - 138 130 - 11 130 - 19 130 - 17 100 - 69 100 - 75 100 - 71 100 - 71 100 - 67 130 - 34 100 - 71 100 - 71

GRID 3G20 3G20 3G20 3G23 3G20 3G23 3H2 3G23 3G23 3G23 5C16 3F17 4G6 4G14 3F16 3G20 3G23 3F10 2G25 2G20 4H4 4I2 4I4 4F6 3G19 4H11 4I4 4F25 4G2 4G8 4F8 3F12 3G14 4H12 4H9 4H25 4E4 2G17 2F7 2B15 2B16 2C3 2F4 2F3 2F9

AUGER DRIVE KIT ..............................................................

AUGER DRIVE LUBE FITTING ............................................

AUGER DRIVE SHAFT ........................................................

AUGER DRIVE SHAFT, PLATFORM ..................................

AUGER DRIVE SHIELD........................................................

AUGER DRIVE SHIELD, PLATFORM..................................

AUGER DRIVE SHIELDS......................................................

AUGER DRIVE SPACER, PLATFORM ................................

AUGER DRIVE SPRING, PLATFORM ................................

AUGER DRIVE SPROCKET, PLATFORM ..........................

AUGER DRIVE SPROCKETS AND CHAINS ......................

AUGER DRIVE TIGHTENER AND SHIELD ........................

AUGER DRIVE TIGHTENER, LOADING ............................

AUGER DRIVE TIGHTENER, LOWER TAILINGS ..............

AUGER DRIVE TUBE AND KNIFE ......................................

AUGER DRIVE UNIVERSAL JOINT YOKE ........................

AUGER DRIVE, PLATFORM ................................................

AUGER SPROCKET..............................................................

AUGER SWING CONTROL LEVER, UNLOADING ............

AUGER SWING,HYDRAULIC OIL LINES AND HOSE........

AUGER SWIVEL SHROUD,HORIZONTAL UNLDG.............

AUGER SWIVEL, HORIZONTAL UNLOADING ..................

AUGER TUBE END,HORIZONTAL UNLDG.AUGER ..........

AUGER, CLEAN GRAIN LOWER ELEVATOR ....................

AUGER, CROSS, FLIGHT EXTENSIONS............................

AUGER, FRONT CROSS, GRAIN TANK ............................

AUGER, HORIZONTAL UNLOADING ..................................

AUGER, LOADING ................................................................

AUGER, LOADING ................................................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER, CLEAN GRAIN........................................

AUGER, PLATFORM ............................................................

AUGER, PLATFORM ............................................................

AUGER, REAR CROSS, GRAIN TANK ..............................

AUGER, UNLOADING, COUNTERSHAFT ..........................

AUGER, VERTICAL, GRAIN TANK......................................

AUGERS, SHOE GRAIN SUPPLY ......................................

AUXILIARY UNLOADING AUGER HYD. MOTOR ..............

AXLE CONTROL ARMS, REAR ..........................................

AXLE PIVOT SHAFT AND SUPPORT ................................

AXLE PIVOT SHAFT AND SUPPORT ................................

AXLE, FINAL DRIVE ............................................................

AXLE, REAR..........................................................................

AXLE, REAR MOUNTING ....................................................

AXLE, REAR, TRASH SHIELD ............................................

PAGE 100 - 67 100 - 67 100 - 67 100 - 71 100 - 67 100 - 71 100 - 75 100 - 71 100 - 71 100 - 71 170 - 5 100 - 35 120 - 129 120 - 137 100 - 33 100 - 67 100 - 71 100 - 27 70 - 39 70 - 33 130 - 7 130 - 31 130 - 33 120 - 103 100 - 65 130 - 15 130 - 33 120 - 123 120 - 125 120 - 131 120 - 105 100 - 29 100 - 59 130 - 16 130 - 13 130 - 29 120 - 75 70 - 30 60 - 34 50 - 8 50 - 9 50 - 21 60 - 31 60 - 29 60 - 36

B 2G1 2F25 3H2 3C18 1E1 2B14 3I25 4C24 4E13 4B13 4B14 4I13 4I16 2J8 5B8 2F1

BACK PLATE KIT, MAIN HYD. PUMP ................................

BACK PLATE REPAIR KIT ..................................................

BACKETS, AUGER DRIVE ..................................................

BACKREST SUPPORTS, SEAT ..........................................

BAFFLE, ROTARY ................................................................

BALANCE BEAM AND FRONT SUPPORT ........................

BALL JOINT, REVERSER CONTROL..................................

BAR, CYLINDER SHEAR......................................................

BAR, FINGER ........................................................................

BAR, RASP............................................................................

BAR, RASP, CYLINDER (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

BAR,PRIMARY COUNTERSHAFT AND MOUNTINGS ......

BARREL, HYDRAULIC CYLINDER, PRIMARY COUNTERSHAFT SHEAVES (DUAL-RANGE)................

BARREL, HYDRAULIC LIFT REEL MASTER CYL. ............

BARREL, LEVELING CYLINDER ........................................

BARREL, POWER STEERING CYLINDER..........................

70 - 14 70 - 13 100 - 75 90 - 15 20 - 72 50 - 7 110 - 45 120 - 44 120 - 85 120 - 5 120 - 6 140 - 5 140 - 8 70 - 98 150 - 3 60 - 27

10-7

PN=7

1A8 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2H18 3F19 3F19 3F19 3F19 3F19 3F19 3F19 2I18 3E13 3F20 3F20 1H10 2B14 3F2 3F10 4I13 4I23 2C11 2C12 3G4 2F4 2F6 2C4 2C3 2C4 2C18 1C2 3G16 4G13 2B22 2B24 5D2 5D2 4C17 4C18 4C18 4C20 4C21 4C21 4C21 4C17 3I4 4B17 1F2 3I25 4I24 4C18 3F9 2D13 3D13 1J3 4C18 4C21 4E22 5D1 4F14 5D7 5D3 4F14 5D5 5C24 5D11 5D1 5D13 4C7

10-8

BARREL,UNLOADING AUG.SWING HYD.CYLINDER ........

BAT REEL DR. ARM ............................................................

BAT REEL DR. CHAIN..........................................................

BAT REEL DR. MOUNTINGS ..............................................

BAT REEL DR. SHAFT ........................................................

BAT REEL DR. SHIELD........................................................

BAT REEL DR. SLAT............................................................

BAT REEL DR. SPROCKETS ..............................................

BAT REEL, HYDRAULIC DRIVE REEL LINES....................

BAT, PICKUP REEL..............................................................

BAT, PICKUP REEL..............................................................

BATSHAFT, PICKUP REEL ..................................................

BATTERY CABLES AND MOUNTINGS ..............................

BEAM, BALANCE ..................................................................

BEAM, TOP, CUTTING PLATFORM ....................................

BEARING HOUSING ............................................................

BEARING, BALL, PRIMARY COUNTERSHAFT ..................

BEARING, DECLUTCHING IDLER ......................................

BEARING, HYDROSTATIC DRIVE PUMP ..........................

BEARING, HYDROSTATIC DRIVE PUMP ..........................

BEARING, PLATFORM FRAME ..........................................

BEARING, REAR AXLE ........................................................

BEARING, REAR WHEELS ..................................................

BEARINGS AND DRIVE SHAFT ..........................................

BEARINGS, FINAL DRIVE....................................................

BEARINGS, FINAL DRIVE....................................................

BEARINGS, HYDROSTATIC DRIVE PUMP ........................

BEARINGS, MAIN..................................................................

BEARINGS, PLATFORM AUGER ........................................

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEARINGS, TRANSMISSION ..............................................

BEARINGS, TRANSMISSION ..............................................

BEATER AND CYLINDER TACHOMETER BELTS ............

BEATER AND CYLINDER TACHOMETER SHEAVES........

BEATER AND TACHOMETER DRIVE ................................

BEATER AND TACHOMETER DRIVE ................................

BEATER BELT ......................................................................

BEATER DRIVE ....................................................................

BEATER DRIVE, BELT, DUAL-RANGE ..............................

BEATER DRIVE, DUAL-RANGE ..........................................

BEATER DRIVE, SHEAVE, DUAL-RANGE..........................

BEATER DRUM ....................................................................

BEATER DRUM, FEEDER....................................................

BEATER GRATE ..................................................................

BELL CRANK ........................................................................

BELL CRANK, REVERSER CONTROL................................

BELT GUIDES,SEPARATOR,UNLDG.AUGER DRIVE ........

BELT TACHOMETER DRIVE ..............................................

BELT TIGHTENER, KNIFE DRIVE ......................................

BELT TIGHTENER, PROPULSION DRIVE..........................

BELT, AIR CONDITIONER ..................................................

BELT, ALTERNATOR............................................................

BELT, BEATER......................................................................

BELT, BEATER DRIVE, DUAL-RANGE ..............................

BELT, CLEANING FAN ........................................................

BELT, CYLINDER..................................................................

BELT, DRIVE, CLEAN GRAIN ELEVATOR ........................

BELT, DRIVE, CLEAN GRAIN ELEVATOR ........................

BELT, DRIVE, CLEANING FAN DRIVE ..............................

BELT, DRIVE, LOADING AUGER DRIVE............................

BELT, DRIVE, REAR, STRAW CHOPPER ..........................

BELT, DRIVE, SECONDARY COUNTERSHAFT ................

BELT, DRIVE, TAILINGS AUGER ........................................

BELT, DRIVE, TORQ-SENSING COUNTERSHAFT ............

BELT, DRIVE, UNLOADING AUGER ..................................

BELT, DUAL-RANGE CYLINDER DRIVE GEAR CASE ................................................................................

PAGE 70 - 57 100 - 37 100 - 37 100 - 37 100 - 37 100 - 37 100 - 37 100 - 37 70 - 81 100 - 3 100 - 39 100 - 39 40 - 23 50 - 7 100 - 19 100 - 27 140 - 5 140 - 15 50 - 30 50 - 31 100 - 47 60 - 31 60 - 33 50 - 23 50 - 21 50 - 23 50 - 37 20 - 21 100 - 61 120 - 136 50 - 15 50 - 17 170 - 16 170 - 16 120 - 35 120 - 36 120 - 36 120 - 39 120 - 41 120 - 41 120 - 41 120 - 35 110 - 23 120 - 9 30 - 13 110 - 45 140 - 16 120 - 36 100 - 26 50 - 57 90 - 35 40 - 68 120 - 36 120 - 41 120 - 95 170 - 15 120 - 111 170 - 21 170 - 17 120 - 111 170 - 19 170 - 13 170 - 25 170 - 15 170 - 27 120 - 24

GRID 5D15 3I17 4G4 3G12 5D7 4G8 4B19 4C17 5C14 4I15 4I16 1E12 1E7 1E5 5C23 5C18 5C14 4D19 4D20 4H9 4C17 4F22 4B24 4F23 5D7 5D5 5C22 2I10 4G14 5C25 5D7 5D2 5D9 4I11 5C19 5C20 5C22 5D9 5D1 5D6 4B22 4E22 4D22 1I6 4D17 2J12 5B8 1B12 1B14 1B22 1B16 1B20 1B24 4G16 2C14 2C15 1H25 1H25 3D11 2D8 1E4 2E9 4F16 4F4 2E12 4G18

BELT, ENGINE R.H. SIDE....................................................

BELT, FEEDER CONVEYOR DRIVE SHAFT......................

BELT, GEAR CASE, LOADING AUGER..............................

BELT, KNIFE DRIVE CASE ..................................................

BELT, LOADING AUGER DRIVE ........................................

BELT, LOWER TAILINGS AUGER ......................................

BELT, O-RING, CYLINDER SPEED TACHOMETER ..........

BELT, O-RING, CYLINDER TACHOMETER ........................

BELT, PLATFORM ................................................................

BELT, PRIMARY COUNTERSHAFT SHEAVES ..................

BELT, PRIMARY COUNTERSHAFT SHEAVES (DUAL RANGE CYLINDER DRIVE) ............................................

BELT, RADIATOR FAN ........................................................

BELT, ROTARY SCREEN ....................................................

BELT, ROTARY SCREEN DRIVE ........................................

BELT, SEPARATOR DRIVE..................................................

BELT, SHEAVES, AND TIGHTENERS-LH ..........................

BELT, SICKLE DRIVE ..........................................................

BELT, STRAW CHOPPER DRIVE ......................................

BELT, STRAW CHOPPER ROTOR ....................................

BELT, UNLOADING AUGER COUNTERSHAFT..................

BELT, V, BEATER AND TACHOMETER DRIVE ................

BELT,CLEAN GRAIN ELEV.DRIVE COUNTERSHAFT ......

BELT,CYLINDER DRIVE INTERMEDIATE SHAFT..............

BELT,DR.,CTRSHAFT.,CLEAN GRAIN ELEVATOR............

BELT,DRIVE,CLEAN GR.ELEV.COUNTERSHAFT ..............

BELT,DRIVE,FRONT,STRAW SPREADER ..........................

BELT,DRIVE,HYDROSTATIC DRIVE UNIT ........................

BELT,HYDROSTATIC DRIVE REEL HYD. PUMP ..............

BELT,LOWER TAILINGS AUG.DRIVE TIGHTENER ..........

BELT,PRIMARY CTR’SHAFT TO HYD.REEL DRIVE..........

BELTS AND SHEAVES, LOADING AUGER DRIVE............

BELTS, BEATER AND CYLINDER TACHOMETER ............

BELTS, CLEAN GRAIN ELEVATOR ....................................

BELTS, ENGINE POWERSHAFT ........................................

BELTS, FEEDER HOUSE DRIVE ........................................

BELTS, FEEDER HOUSE DRIVE ........................................

BELTS, HYDROSTATIC GROUND DRIVE ..........................

BELTS, LOADING AUGER ..................................................

BELTS, PRIMARY COUNTERSHAFT TO CYLINDER ........

BELTS, SHOE GRAIN SUPPLY AUGERS DRIVE ..............

BEVEL GEAR, CONCAVE ADJUSTING CONTROLS ........

BLADE, CLEANING FAN ......................................................

BLADE, STRAW SPREADER ..............................................

BLADE, WINDSHIELD WIPER ............................................

BLADES, STRAW CHOPPER ..............................................

BLEEDER SCREW, SLAVE CYLINDER ..............................

BLEEDER VALVE, LEVELING CYLINDER ..........................

BLOCK, CYLINDER (TH 01) ................................................

BLOCK, CYLINDER (TH 01) ................................................

BLOCK, CYLINDER (6466AH 01) ........................................

BLOCK, ENGINE SHORT (TH 01) ......................................

BLOCK, ENGINE SHORT (TH 01) ......................................

BLOCK, ENGINE SHORT (TH 05) ......................................

BLOCK,TIGHTENER,UPPER TAILINGS AUG.DRIVE ........

BLOCKS, CYLINDER, HYDROSTATIC DRIVE PUMP ........

BLOCKS, CYLINDER, HYDROSTATIC DRIVE PUMP ........

BLOWER AND HARNESS, CAB ROOF WIRING................

BLOWER NOISE SUPPRESSOR CONDENSER ................

BLOWER, PRESSURIZER....................................................

BODY, HYDROSTATIC CHARGE PUMP ............................

BOGIE WHEELS, ROTARY SCREEN..................................

BOOT, BRAKE SLAVE CYLINDER ......................................

BOOT, CLEAN GRAIN ELEVATOR HOUSING ..................

BOOT, CLEAN GRAIN LOWER ELEVATOR HOUSING ....

BOOT, PARKING BRAKE ....................................................

BOOT, SEPARATOR DRIVE CONTROLS ..........................

6622 COMBINE PC1746

PAGE 170 - 29 110 - 36 120 - 127 100 - 57 170 - 21 120 - 131 120 - 11 120 - 35 170 - 3 140 - 7 140 - 8 20 - 84 20 - 79 20 - 76 170 - 12 170 - 7 170 - 3 120 - 65 120 - 67 130 - 13 120 - 35 120 - 120 120 - 17 120 - 121 170 - 21 170 - 19 170 - 11 70 - 73 120 - 137 170 - 14 170 - 21 170 - 16 170 - 23 140 - 3 170 - 8 170 - 9 170 - 11 170 - 23 170 - 15 170 - 20 120 - 15 120 - 95 120 - 69 40 - 45 120 - 63 70 - 102 150 - 3 20 - 6 20 - 8 20 - 16 20 - 10 20 - 14 20 - 18 120 - 139 50 - 33 50 - 34 40 - 39 40 - 39 90 - 33 50 - 51 20 - 75 60 - 10 120 - 114 120 - 101 60 - 13 120 - 141

(16-OCT-86) PN=8

1A9 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2E16 4F10 3H21 3H23 3H25 3B18 1H19 4F16 3B14 4F25 3B14 3B11 3B9 4H9 4F4 4C4 3H13 3J8 4C5 3H11 5C6 1F3 1J5 4F11 3J9 3J10 1G6 1G10 4G24 2I17 3H3 4G6 3F22 1I22 2F9 1H17 1G17 4H4 4F6 4I21 4I24 4I24 4G16 3C20 4E15 3H2 1H2 3G18 2E12 2E5 2E3 2E8 2E1 2E9 2E10 2E6 2E14 1H12 1E18 4I11 4B19 2F4 2F9 1H12 1H21 1C18

BOOT, STEERING COLUMN ..............................................

BOOT,CLEAN GRAIN ELEVATOR UPPER HOUSING ......

BOTTOM SHEETS, FEEDER HOUSE ................................

BOTTOM SHEETS, REVERSER FEEDER HOUSE ............

BOTTOM SHEETS, REVERSER FEEDER HOUSE ............

BOX, TOOL............................................................................

BOX,CONTROL,LOW SHAFT SPEED MONITORING ........

BRACE, CLEAN GRAIN ELEVATOR HOUSING ................

BRACE, CROSS, SEPARATOR ..........................................

BRACE, LOADING AUGER AND HOUSING ......................

BRACE, REAR, SEPARATOR CROSS ................................

BRACE, SEPARATOR L.H. SIDE SHEET ..........................

BRACE, SEPARATOR R.H. SIDE SHEET ..........................

BRACE, UNLOADING AUGER COUNTERSHAFT ..............

BRACE,CLEAN GRAIN LOWER ELEVATOR HOUSING ....

BRACES, CYLINDER DRIVE SUPPORT ............................

BRACES, FEEDER HOUSE..................................................

BRACES, FEEDER HOUSE MIDDLE BELT ........................

BRACES, INTERMEDIATE DRIVE SUPPORT (DUAL-RANGE CYLINDER DRIVE) ................................

BRACES, PLATFORM ..........................................................

BRACKET AND LEVELING LIMIT SWITCH ........................

BRACKET, AIR INTAKE TUBES ..........................................

BRACKET, ALTERNATOR....................................................

BRACKET, CLEAN GRAIN ELEVATOR HOUSING ............

BRACKET, FEEDER CONVEYOR DRIVE ..........................

BRACKET, FEEDER CONVEYOR DRIVE ..........................

BRACKET, FUEL SHUT-OFF ..............................................

BRACKET, FUEL SHUT-OFF ..............................................

BRACKET, GRAIN TANK......................................................

BRACKET, HYDRAULIC DRIVE REEL OIL LINES ............

BRACKET, KNIFE DRIVE ....................................................

BRACKET, LOADING AUGER DRIVE TIGHTENER ..........

BRACKET, PICKUP REEL DR. ............................................

BRACKET, RADIO ................................................................

BRACKET, REAR AXLE TRASH SHIELD............................

BRACKET, SPOTLIGHT........................................................

BRACKET, UNLOADING AUGER LIGHT ............................

BRACKET, UNLOADING AUGER SWIVEL SHROUD ........

BRACKET,ADJ.,CLEAN GRAIN LOWER ELEVATOR ........

BRACKET,SECONDARY CTRSHAFT DRIVE IDLER..........

BRACKET,SEPARATOR AUG.DRIVE BELT GUIDES ........

BRACKET,UNLDG.AUGER DRIVE BELT GUIDES ............

BRACKET,UPPER TAILINGS AUG.DR.TIGHTENER ..........

BRACKETS, ARMREST ........................................................

BRACKETS, CHAFFER FRAME ..........................................

BRACKETS, KNIFE DRIVE ..................................................

BRACKETS, MOUNTING, LOW SHAFT SPEED ................

BRACKETS, PLATFORM AUGER........................................

BRAKE CONTROLS, PARKING ..........................................

BRAKE LINES, LEFT-HAND ................................................

BRAKE LINES, RIGHT-HAND ..............................................

BRAKE MASTER CYLINDER ..............................................

BRAKE PEDALS AND LINKAGE..........................................

BRAKE SLAVE CYLINDER ..................................................

BRAKE SLAVE CYLINDER KIT............................................

BRAKES, DRIVE WHEEL ....................................................

BRAKES, PARKING (L.H. ILLUSTRATED) ..........................

BREAKER, CIRCUIT ............................................................

BREATHER, FUEL TANK ....................................................

BRUSH, ENGINE POWERSHAFT ........................................

BULB, CYLINDER SPEED TACHOMETER ........................

BUSHING, REAR AXLE ........................................................

BUSHING, RUBBER, REAR AXLE TRASH SHIELD ..........

BUSS BAR, CIRCUIT BREAKER ........................................

BUZZER, WARNING ............................................................

BYPASS VALVE, OIL COOLER (TH 01) ............................

6622 COMBINE PC1746

(16-OCT-86)

PAGE 60 - 17 120 - 107 110 - 15 110 - 17 110 - 19 80 - 13 40 - 33 120 - 114 80 - 8 120 - 123 80 - 8 80 - 5 80 - 3 130 - 13 120 - 101 120 - 21 110 - 7 110 - 53 120 - 22 110 - 5 150 - 28 30 - 14 40 - 70 120 - 108 110 - 54 110 - 55 30 - 44 30 - 48 130 - 3 70 - 80 100 - 76 120 - 129 100 - 41 40 - 61 60 - 36 40 - 31 40 - 5 130 - 7 120 - 103 140 - 13 140 - 16 140 - 16 120 - 139 90 - 17 120 - 87 100 - 75 40 - 15 100 - 63 60 - 13 60 - 5 60 - 3 60 - 9 60 - 1 60 - 10 60 - 11 60 - 7 60 - 15 40 - 25 30 - 3 140 - 3 120 - 11 60 - 31 60 - 36 40 - 25 40 - 35 20 - 38

GRID 1C24 1C25

BYPASS VALVE, OIL COOLER (TH 01, 05) ......................

BYPASS VALVE, OIL COOLER (TH 05) ............................

PAGE 20 - 44 20 - 45

C 3D12 3C25 3D3 3D9 3D7 3D7 3D6 3D8 1H25 3C15 3D1 1F2 2C6 4B19 1G9 1G21 2E12 1I23 3I25 1E25 2G24 1J13 2B12 3H9 1H10 1C5 1C5 1D25 2F15 1E11 1F6 3G23 3G12 1D13 1D17 1D15 4E9 4E13 4E15 4E15 3I14 3J11 3I15 3I16 3G23 3F19 4F6 4F14 4B22 4F15 3I10 3F24 3I9 3I11 3J9 3J10 4H11 4H12 3G25 4F14 4F25

CAB AIR FILTER AND HOUSING........................................

CAB AND MIRROR ..............................................................

CAB DOORS ........................................................................

CAB PANEL, UPPER ............................................................

CAB ROOF AND COVERS ..................................................

CAB ROOF AND COVERS, INNER ....................................

CAB ROOF AND SUPPORTS ..............................................

CAB ROOF HEADLINER ......................................................

CAB ROOF WIRING HARNESS AND BLOWER ................

CAB SEAL ............................................................................

CAB WINDOWS ....................................................................

CABLE SUPPORTS ..............................................................

CABLE, CONTROL, HYDROSTATIC DRIVE ......................

CABLE, CYLINDER SPEED TACHOMETER ......................

CABLE, FUEL SHUT-OFF CONTROL ................................

CABLE, MODULE, ELECTROMAGNETIC CLUTCH............

CABLE, PARKING BRAKE ..................................................

CABLE, RADIO EXTERNAL ANTENNA ..............................

CABLE, REVERSER CONTROL ..........................................

CABLE, THROTTLE LINKAGE CONTROL ..........................

CABLE, VARIABLE CYLINDER CONTROL ........................

CABLE, WIRING....................................................................

CABLES AND MOUNTINGS, GEARSHIFT..........................

CABLES AND MTG.,PLATFORM LEVELING-RH ................

CABLES, BATTERY ..............................................................

CAMSHAFT............................................................................

CAMSHAFT GEAR ................................................................

CAP, ENGINE COOLANT HEATER ....................................

CAP, HYDRAULIC OIL RESERVOIR ..................................

CAP, RADIATOR ..................................................................

CAP, RAIN ............................................................................

CARRIER, AUGER DRIVE, PLATFORM..............................

CASE, KNIFE DRIVE ............................................................

CENTER HOUSING, TURBOCHARGER..............................

CENTER HOUSING, TURBOCHARGER..............................

CENTER HOUSING, TURBOCHARGER(AIRESEARCH)....

CHAFFER AND SIEVE..........................................................

CHAFFER FRAME AND COVER ........................................

CHAFFER FRAME BRACKETS............................................

CHAFFER FRAME SWINGERS............................................

CHAIN DRIVE TIGHTENER, FEEDER BEATER ................

CHAIN GUIDES, FEEDER CONVEYOR DRIVE..................

CHAIN SHIELD, FEEDER CONVEYOR ..............................

CHAIN SHIELDS, FEEDER CONVEYOR ............................

CHAIN, AUGER DRIVE, PLATFORM ..................................

CHAIN, BAT REEL DR. ........................................................

CHAIN, CLEAN GRAIN LOWER ELEVATOR......................

CHAIN, CLEAN GRAIN UPPER ELEVATOR ......................

CHAIN, CONCAVE ADJUSTING CONTROLS ....................

CHAIN, CONVEYOR, CLEAN GRAIN ELEVATOR ............

CHAIN, CONVEYOR, FEEDER ............................................

CHAIN, CYL. ROD EX., REEL SUPPORT ARMS ..............

CHAIN, FEEDER BEATER DRIVE ......................................

CHAIN, FEEDER CONVEYOR ............................................

CHAIN, FEEDER CONVEYOR DRIVE ................................

CHAIN, FEEDER CONVEYOR DRIVE ................................

CHAIN, GRAIN TANK FRONT CROSS AUGER ................

CHAIN, GRAIN TANK REAR CROSS AUGER....................

CHAIN, KNIFE DRIVE ..........................................................

CHAIN, LOADING AUGER ..................................................

CHAIN, LOADING AUGER ..................................................

90 - 34 90 - 22 90 - 25 90 - 31 90 - 29 90 - 29 90 - 28 90 - 30 40 - 39 90 - 12 90 - 23 30 - 13 50 - 25 120 - 11 30 - 47 40 - 9 60 - 13 40 - 63 110 - 45 30 - 11 70 - 37 40 - 78 50 - 5 110 - 3 40 - 23 20 - 24 20 - 24 20 - 71 70 - 3 20 - 83 30 - 17 100 - 71 100 - 57 20 - 58 20 - 63 20 - 60 120 - 81 120 - 85 120 - 87 120 - 87 110 - 33 110 - 56 110 - 34 110 - 35 100 - 71 100 - 37 120 - 103 120 - 111 120 - 15 120 - 113 110 - 29 100 - 43 110 - 28 110 - 30 110 - 54 110 - 55 130 - 15 130 - 16 100 - 73 120 - 111 120 - 123

10-9

PN=9

1A10 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 5D7 3F22 5C14 4I19 4E16 4D7 4G13 4H9 4G15 5D7 4F14 4F6 5D11 4E18 4G16 5C17 5C17 5C21 3C8 3H2 4H13 2D11 2D8 1F9 4D17 5D5 4D14 4F4 1H3 1H12 1H23 1H23 1F3 1F6 4G20 2F1 3B16 2F8 1H6 5D7 5D9 4F22 4F23 4F19 4F21 4F11 4F16 5D9 4F10 4F8 4F2 4F6 4F6 4F4 4F6 4F4 4F6 4F6 4F6 4F14 4F14 4F14 1F4 4E22 4E20 4E24 1H3

10-10

CHAIN, LOADING AUGER ..................................................

CHAIN, PICKUP REEL DR. ..................................................

CHAIN, PLATFORM ..............................................................

CHAIN, SECONDARY COUNTERSHAFT ............................

CHAIN, SHOE PITMAN ........................................................

CHAIN, STRAW WALKER DRIVE TIGHTENER..................

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

CHAIN, UNLOADING AUGER COUNTERSHAFT ..............

CHAIN, UPPER TAILINGS AUGER ....................................

CHAIN,CLEAN GR.LOWER ELEV., LOWER AUGER ........

CHAIN,CLEAN GR.LOWER ELEV.,LOWER AUGER ..........

CHAIN,CONVEYOR,CLEAN GRAIN LOWER ELEV. ..........

CHAIN,DRIVE,TAILINGS UPPER AUGER ..........................

CHAIN,SHOE CRANKSHAFT DRIVE TIGHTENER ............

CHAIN,UPPER TAILINGS AUG.DRIVE TIGHTENER..........

CHAINS AND SPROCKETS, DRIVE-RH ............................

CHAINS AND TIGHTENERS, DRIVE-RH ............................

CHAINS, FEEDER HOUSE ..................................................

CHANNEL SUPPORTS, OPERATOR’S ..............................

CHANNEL, AUGER DRIVE ..................................................

CHANNELS,GRAIN TANK INNER UNLOADING AUG. ......

CHARGE PUMP MOUNTING, HYDROSTATIC DRIVE ......

CHARGE PUMP, HYDROSTATIC ........................................

CHECK VALVE, FUEL ..........................................................

CHOPPER, STRAW ..............................................................

CHOPPER, STRAW ..............................................................

CHOPPER, STRAW, PLATE AND FINS..............................

CHUTE, CLEAN GRAIN LOWER ELEVATOR ....................

CIRCUIT BOX, HARVESTRAK ............................................

CIRCUIT BREAKER AND RELAY PANEL ..........................

CIRCUIT BREAKER, ELECTRIC CLUTCH ..........................

CIRCUIT BREAKER, HARVESTRAK....................................

CLAMP, AIR INTAKE TUBES ..............................................

CLAMP, EXHAUST PIPE ......................................................

CLAMP, L.H. SIDE LUBE BANK SYSTEM ..........................

CLAMP, POWER STEERING CYLINDER............................

CLAMP, SEPARATOR R.H. SHIELD....................................

CLAMP, STEERING TIE RODS ..........................................

CLAMPS, REAR CAB HARNESS ........................................

CLEAN GRAIN ELEVATOR ..................................................

CLEAN GRAIN ELEVATOR DRIVE......................................

CLEAN GRAIN ELEVATOR DRIVE COUNTERSHAFT ......

CLEAN GRAIN ELEVATOR DRIVE COUNTERSHAFT ......

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER................

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER................

CLEAN GRAIN ELEVATOR HOUSING ................................

CLEAN GRAIN ELEVATOR HOUSING BOOT ....................

CLEAN GRAIN ELEVATOR SHEAVES AND BELTS..........

CLEAN GRAIN ELEVATOR UPPER HOUSING ..................

CLEAN GRAIN LOWER AUGER AND HOUSING ..............

CLEAN GRAIN LOWER AUGER HOUSING........................

CLEAN GRAIN LOWER ELEV. CONVEYOR CHAIN..........

CLEAN GRAIN LOWER ELEVATOR AUGER ....................

CLEAN GRAIN LOWER ELEVATOR CHUTE......................

CLEAN GRAIN LOWER ELEVATOR GUARD ....................

CLEAN GRAIN LOWER ELEVATOR HOUSING ................

CLEAN GRAIN LOWER ELEVATOR PLATE ......................

CLEAN GRAIN LOWER ELEVATOR SHAFTS ....................

CLEAN GRAIN LOWER ELEVATOR SPROCKETS ............

CLEAN GRAIN UPPER ELEVATOR SHAFTS ....................

CLEAN GRAIN UPPER ELEVATOR SHEAVE ....................

CLEAN GRAIN UPPER ELEVATOR SPROCKETS ............

CLEANER, AIR ......................................................................

CLEANING FAN ....................................................................

CLEANING FAN HSG. AND PROTECTOR SHIELD ..........

CLEANING FAN SPEED CONTROL LINKAGE ..................

CLEANING SHOE SENSOR ................................................

PAGE 170 - 21 100 - 41 170 - 3 140 - 11 120 - 88 120 - 53 120 - 136 130 - 13 120 - 138 170 - 21 120 - 111 120 - 103 170 - 25 120 - 91 120 - 139 170 - 6 170 - 6 170 - 10 90 - 5 100 - 75 130 - 17 50 - 55 50 - 51 30 - 21 120 - 63 170 - 19 120 - 60 120 - 101 40 - 16 40 - 25 40 - 37 40 - 37 30 - 14 30 - 17 120 - 143 60 - 27 80 - 10 60 - 35 40 - 19 170 - 21 170 - 23 120 - 120 120 - 121 120 - 117 120 - 119 120 - 108 120 - 114 170 - 23 120 - 107 120 - 105 120 - 99 120 - 103 120 - 103 120 - 101 120 - 103 120 - 101 120 - 103 120 - 103 120 - 103 120 - 111 120 - 111 120 - 111 30 - 15 120 - 95 120 - 93 120 - 97 40 - 16

GRID 4I21 3G9 1G21 3F10 4E6 3I8 3J5 4G8 1G21 1J8 1E23 2E16 1J9 2E18 3D20 3D23 3D16 3D21 3D18 3D19 1H10 3D13 4B22 4B20 4B17 3D25 1H25 4H6 3H4 1C3 1C4 4F6 1J15 4G20 4G19 4I6 1J19 3C22 3C12 3C14 1H3 3C14 2C8 2C6 2D5 4H7 2G25 1H3 2H10 2H12 2I8 5B21 2D3 2H2 2H3 2H5 2D2 2I23 1G8 1G9 3E5 2G24 4B22 2E12 2I5 2I5

CLEVIS, SECONDARY CTRSHAFT DRIVE IDLER ............

CLIP, CUTTERBAR KNIFE GUARDS (NON-CLOG) ..........

CLUTCH, ELECTROMAGNETIC, HEADER ........................

CLUTCH, SLIP ......................................................................

CLUTCH, SLIP ......................................................................

CLUTCH, SLIP, FEEDER BEATER......................................

CLUTCH, SLIP, FEEDER HOUSE ......................................

CLUTCH,SLIP,LOWER TAILINGS AUGER..........................

COIL, ELECTROMAGNETIC CLUTCH ................................

COIL, STARTER....................................................................

COLD WEATHER STARTING AID ......................................

COLUMN AND WHEEL, STEERING ....................................

COMMUTATOR END FRAME, STARTER ..........................

COMMUTATOR, STEERING PUMP ....................................

COMPRESSOR CLUTCH AND SERVICE VALVE ..............

COMPRESSOR HARDWARE KIT ........................................

COMPRESSOR HARNESS AND RELAY ............................

COMPRESSOR KIT ..............................................................

COMPRESSOR MOUNTING AND SUPPORTS ..................

COMPRESSOR MOUNTING AND SUPPORTS ..................

COMPRESSOR WIRING HARNESS ....................................

COMPRESSOR, AIR CONDITIONING ................................

CONCAVE ADJUSTING CONTROLS ..................................

CONCAVE ADJUSTING SHAFT ..........................................

CONCAVE, OPEN-BAR ........................................................

CONDENSER AND AIR CONDITIONER LINES..................

CONDENSER NOISE SUPPRESSOR ................................

CONDUIT, GRAIN TANK EXTENSION ................................

CONDUIT, SHIELD................................................................

CONNECTING RODS ..........................................................

CONNECTING RODS ..........................................................

CONNECTOR, CLEAN GRAIN LOWER ELEVATOR ..........

CONNECTOR, ELECTRICAL, SERVICE KIT ......................

CONNECTOR, L.H. SIDE LUBE BANK SYSTEM ..............

CONNECTOR, R.H. SIDE LUBE BANK SYSTEM ..............

CONNECTOR,UNLOADING AUG.LUBE BANK SYSTEM ..

CONNECTORS, SUPPLEMENTARY TERMINALS..............

CONSOLE COVERS ............................................................

CONSOLE INSULATION, SEAT ..........................................

CONSOLE SEALS ................................................................

CONSOLE, GRAIN LOSS (HARVESTRAK) ........................

CONSOLE, SEAT ..................................................................

CONTROL CABLE MOUNTING,HYDROSTATIC DRIVE ....

CONTROL CABLE, HYDROSTATIC DRIVE ........................

CONTROL HANDLE AND ORIFICE ....................................

CONTROL LEVER, UNLOADING AUGER ..........................

CONTROL LEVER, UNLOADING AUGER SWING ............

CONTROL PANEL, HARVESTRAK COMBINE MONITOR ..........................................................................

CONTROL VALVE KIT, SECONDARY ................................

CONTROL VALVE KIT, SECONDARY ................................

CONTROL VALVE LINKAGE,HYDRO.DR.REEL SPD ........

CONTROL VALVE SOLENOID KIT......................................

CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT ......

CONTROL VALVE, SECONDARY........................................

CONTROL VALVE, SECONDARY........................................

CONTROL VALVE, SECONDARY........................................

CONTROL VALVE,HYDRO.DRIVE DISPLACEMENT..........

CONTROL VALVE,HYDRO.DRIVE REEL FLOW ................

CONTROL, FUEL SHUT-OFF ..............................................

CONTROL, FUEL SHUT-OFF ..............................................

CONTROL, HEATER ............................................................

CONTROL, VARIABLE CYLINDER ......................................

CONTROLS, CONCAVE ADJUSTING ................................

CONTROLS, PARKING BRAKE ..........................................

CONTROLS, PLATFORM LIFT ............................................

CONTROLS, REEL LIFT ......................................................

6622 COMBINE PC1746

PAGE 140 - 13 100 - 53 40 - 9 100 - 27 120 - 77 110 - 27 110 - 50 120 - 131 40 - 9 40 - 73 30 - 9 60 - 17 40 - 74 60 - 19 90 - 43 90 - 47 90 - 38 90 - 44 90 - 40 90 - 41 40 - 23 90 - 35 120 - 15 120 - 13 120 - 9 90 - 49 40 - 39 130 - 9 100 - 77 20 - 22 20 - 23 120 - 103 40 - 80 120 - 143 120 - 142 130 - 35 40 - 84 90 - 19 90 - 9 90 - 11 40 - 16 90 - 11 50 - 27 50 - 25 50 - 48 130 - 11 70 - 39 40 - 16 70 - 49 70 - 51 70 - 71 150 - 17 50 - 46 70 - 41 70 - 42 70 - 44 50 - 45 70 - 86 30 - 46 30 - 47 90 - 54 70 - 37 120 - 15 60 - 13 70 - 68 70 - 68

(16-OCT-86) PN=10

1A11 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 4G18 3I13 3I15 3I16 4F15 3I10 3I11 4F6 3I20 3I17 1D3 2D16 1D24 1D25 3E4 3D25 3B20 4I13 3I12 4I15 4I19 2B22 4H9 4F22 4F23 4B22 2C10 4H7 4E13 2E8 4C7 2C11 2C12 4H25 3I4 1C6 3G12 3B13 3G14 3B13 4H15 1C14 1E2 2E16 1C8 1C6 2B20 3C22 4C23 4H14 3D7 4H15 4H13 5D3 1F2 4B22 4E16 1C1 4E18 1C7 1C7 1C1 4D4 4D6 4E18 2F8

CONTROLS, SEPARATOR DRIVE ......................................

CONVERSION, PLATFORM ................................................

CONVEYOR CHAIN SHIELD, FEEDER ..............................

CONVEYOR CHAIN SHIELDS, FEEDER ............................

CONVEYOR CHAIN, CLEAN GRAIN ELEVATOR ..............

CONVEYOR CHAIN, FEEDER ............................................

CONVEYOR CHAIN, FEEDER ............................................

CONVEYOR CHAIN,CLEAN GRAIN LOWER ELEV. ..........

CONVEYOR DRIVE IDLER, FEEDER ................................

CONVEYOR DRIVE SHAFT, FEEDER ................................

COOLER, ENGINE OIL ........................................................

COOLER, OIL, HYDROSTATIC DRIVE................................

CORD ASSEMBLY, ENGINE COOLANT HEATER ............

CORD, ENGINE COOLANT HEATER..................................

CORE, AIR CONDITIONER EVAPORATOR........................

CORE, VALVE ......................................................................

CORNER FRAME ..................................................................

COUNTERSHAFT AND MOUNTINGS, PRIMARY ..............

COUNTERSHAFT, FEEDER BEATER DRIVE ....................

COUNTERSHAFT, PRIMARY, SHEAVES............................

COUNTERSHAFT, SECONDARY ........................................

COUNTERSHAFT, TRANSMISSION ....................................

COUNTERSHAFT, UNLOADING AUGER ............................

COUNTERSHAFT,DRIVE,CLEAN GRAIN ELEVATOR........

COUNTERSHAFT,DRIVE,CLEAN GRAIN ELEVATOR........

COUPLER DISK,CONCAVE ADJUSTING CONTROLS ......

COUPLER, HYDROSTATIC DRIVE MOTOR ......................

COUPLER,DISK,UNLDG.AUGER CONTROL LEVER ........

COVER AND CHAFFER FRAME ........................................

COVER, BRAKE MASTER CYLINDER ................................

COVER, DUAL-RANGE CYLINDER DRIVE GEAR CASE ................................................................................

COVER, FRONT, HYDROSTATIC DRIVE PUMP................

COVER, FRONT, HYDROSTATIC DRIVE PUMP................

COVER, GRAIN TANK VERTICAL AUGER ........................

COVER, HAND HOLE, BEATER DRUM..............................

COVER, INJECTION PUMP GEAR......................................

COVER, KNIFE DRIVE CASE ..............................................

COVER, L.H., REAR HOOD ................................................

COVER, PLATFORM AUGER ..............................................

COVER, R.H., REAR HOOD ................................................

COVER, REAR, GRASS SEED UNLOADING AUGER ......

COVER, ROCKER ARM ......................................................

COVER, ROTARY SCREEN DOOR ....................................

COVER, STEERING COLUMN ............................................

COVER, TACHOMETER DRIVE GEAR ..............................

COVER, TIMING GEAR ........................................................

COVER,TRANS.AND DIFFERENTIAL HOUSING................

COVERS, CONSOLE ............................................................

COVERS, CYLINDER............................................................

COVERS, GRAIN TANK FRONT AND REAR, ADJ. ..........

COVERS, INNER CAB ROOF ..............................................

COVERS,AUGER, GRASS SEED UNLOADING ................

COVERS,AUGER,GRAIN TANK INNER UNLOADING........

CRANK AND SPROCKET, SHOE ........................................

CRANK, BELL........................................................................

CRANK, CONCAVE ADJUSTING CONTROLS....................

CRANK, SHOE PITMAN ......................................................

CRANKSHAFT ......................................................................

CRANKSHAFT DRIVE TIGHTENER, SHOE ........................

CRANKSHAFT OIL SEAL ....................................................

CRANKSHAFT OIL SEAL HOUSING ..................................

CRANKSHAFT PULLEY........................................................

CRANKSHAFT, FRONT, STRAW WALKER ........................

CRANKSHAFT, REAR, STRAW WALKER ..........................

CRANKSHAFT, SHOE, DRIVE TIGHTENER ......................

CROSS ASSEMBLY, STEERING TIE RODS ......................

6622 COMBINE PC1746

(16-OCT-86)

PAGE 120 - 141 110 - 32 110 - 34 110 - 35 120 - 113 110 - 29 110 - 30 120 - 103 110 - 39 110 - 36 20 - 48 50 - 60 20 - 70 20 - 71 90 - 53 90 - 49 80 - 15 140 - 5 110 - 31 140 - 7 140 - 11 50 - 15 130 - 13 120 - 120 120 - 121 120 - 15 50 - 29 130 - 11 120 - 85 60 - 9 120 - 24 50 - 30 50 - 31 130 - 29 110 - 23 20 - 25 100 - 57 80 - 7 100 - 59 80 - 7 130 - 19 20 - 33 20 - 73 60 - 17 20 - 27 20 - 25 50 - 13 90 - 19 120 - 43 130 - 18 90 - 29 130 - 19 130 - 17 170 - 17 30 - 13 120 - 15 120 - 88 20 - 20 120 - 91 20 - 26 20 - 26 20 - 20 120 - 49 120 - 51 120 - 91 60 - 35

GRID 4H17 3G19 5D13 4H11 4H12 1F4 4C25 4I23 3C19 3F6 3F4 3G9 3G8 3F2 3F24 1B12 1B14 1B22 2G24 4C23 4B24 4C4 4C15 2G20 1C11 1D20 4C5 1B10 1C3 1C4 5B15 4C24 4B19 2E8 4I16 5B8 2J8 2J10 2I25 4I15 4B13 4B14 2E9 2J12 2J14 2H18 2H20 2H21 2F1

CROSS AUGER DRIVE TIGHTENERS,GRAIN TANK ........

CROSS AUGER FLIGHT EXTENSIONS..............................

CROSS AUGER FRONT SPROCKET ................................

CROSS AUGER, GRAIN TANK FRONT..............................

CROSS AUGER, GRAIN TANK REAR ................................

CUP, DUST, AIR CLEANER ................................................

CURTAINS, SEPARATOR ....................................................

CUSHION, DECLUTCHING IDLER ......................................

CUSHIONS, SEAT ................................................................

CUTTERBAR DRIVE ARM....................................................

CUTTERBAR KNIFE GUARDS (NON-CLOG)......................

CUTTERBAR KNIFE GUARDS (NON-CLOG)......................

CUTTERBAR WEAR PLATE, KNIVES AND GUARDS ......

CUTTING PLATFORM ANGLES AND TOP BEAM ............

CYL. ROD EXTENSION, REEL SUPPORT ARMS ............

CYLINDER BLOCK (TH 01)..................................................

CYLINDER BLOCK (TH 01)..................................................

CYLINDER BLOCK (6466AH 01) ........................................

CYLINDER CONTROL, VARIABLE ......................................

CYLINDER COVERS ............................................................

CYLINDER DRIVE INTERMEDIATE SHAFT........................

CYLINDER DRIVE SUPPORT BRACES..............................

CYLINDER DRIVE TIGHTENER ..........................................

CYLINDER DRIVE,HYD.OIL LINES AND HOSES ..............

CYLINDER HEAD ..................................................................

CYLINDER HEAD GASKET KIT ..........................................

CYLINDER INTERMEDIATE DRIVE SUPPORT BRACES (DUAL-RANGE CYLINDER DR.)......................

CYLINDER LINER PACKING LUBRICANT..........................

CYLINDER LINERS ..............................................................

CYLINDER LINERS ..............................................................

CYLINDER MOUNTING, LEVELING ....................................

CYLINDER SHEAR BAR ......................................................

CYLINDER SPEED TACHOMETER ....................................

CYLINDER, BRAKE MASTER ..............................................

CYLINDER, HYDRAULIC, PRIMARY COUNTERSHAFT SHEAVES (DUAL-RANGE)................

CYLINDER, LEVELING ........................................................

CYLINDER, MASTER, HYDRAULIC LIFT REEL ................

CYLINDER, MASTER, HYDRAULIC LIFT REEL-RH ..........

CYLINDER, PLATFORM LIFT ..............................................

CYLINDER, PRIMARY COUNTERSHAFT............................

CYLINDER, RASP-BAR ........................................................

CYLINDER, RASP-BAR (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

CYLINDER, SLAVE, BRAKE ................................................

CYLINDER,HYDRAULIC LIFT REEL SLAVE-LEFT ............

CYLINDER,SLAVE, HYDRAULIC LIFT REEL-LH ................

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDERS, POWER STEERING ......................................

PAGE 130 - 21 100 - 65 170 - 27 130 - 15 130 - 16 30 - 15 120 - 45 140 - 15 90 - 16 100 - 23 100 - 21 100 - 53 100 - 52 100 - 19 100 - 43 20 - 6 20 - 8 20 - 16 70 - 37 120 - 43 120 - 17 120 - 21 120 - 33 70 - 33 20 - 30 20 - 66 120 - 22 20 - 3 20 - 22 20 - 23 150 - 11 120 - 44 120 - 11 60 - 9 140 - 8 150 - 3 70 - 98 70 - 100 70 - 88 140 - 7 120 - 5 120 - 6 60 - 10 70 - 102 70 - 104 70 - 57 70 - 59 70 - 60 60 - 27

D 5D25 3F2 3G4 5D16 5D17 3D5 5D24 5D21 5D17 5D16 5D19

DECAL KIT ............................................................................

DECAL, DRIVESHAFT ..........................................................

DECAL, DRIVESHAFT ..........................................................

DECAL, DRIVESHAFT ..........................................................

DECAL, DRIVESHAFT ..........................................................

DECAL, L.H. LOWER DOOR................................................

DECAL, PANEL ....................................................................

DECALS, FRONT AND REAR..............................................

DECALS, PLATFORM ..........................................................

DECALS, REEL ARM............................................................

DECALS, RIGHT-HAND AND LEFT-HAND..........................

170 - 39 100 - 19 100 - 47 170 - 30 170 - 31 90 - 27 170 - 38 170 - 35 170 - 31 170 - 30 170 - 33

10-11 PN=11

1A12 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 5D23 3C6 4I23 4E20 4C23 4G10 1F20 5C8 2D8 2F17 2B25 2C1 1I24 1I25 1J1 1C9 1C9 4B22 2E6 1E7 2D6 2D3 2D2 1E9 3G2 3E22 3E21 3E19 1I2 3B11 4E13 4F16 4F2 4F4 4G24 3B23 3I2 4G24 4G24 3D5 4F25 3B13 4G24 1E2 4E2 4B11 4B17 3C12 4G12 3B22 4F10 4H25 4I2 3B9 3D3 3B7 3H17 3H19 2D8 3E4 1E11 3F6 3F9 2D13 1E9 5C19 5C20

10-12

DECALS,INSTRUMENT PANEL, CONSOLE COVER ........

DECK, LADDER, FRONT......................................................

DECLUTCHING IDLER..........................................................

DEFLECTOR, CLEANING FAN HOUSING ..........................

DEFLECTOR, CYLINDER COVERS ....................................

DEFLECTOR, LOWER TAILINGS HOUSING ......................

DELIVERY VALVE, FUEL INJECTION PUMP ....................

DIAPHRAGM ASSEMBLY, MICRO SWITCH ......................

DIAPHRAGM, HYDROSTATIC CHARGE PUMP ................

DIAPHRAGM, MAIN HYDRAULIC PUMP ............................

DIFFERENTIAL GEARS AND SHAFTS ..............................

DIFFERENTIAL GEARS AND SHAFTS ..............................

DIODE RING, ALTERNATOR, 72 AMP................................

DIODE RING, ALTERNATOR, 72 AMP................................

DIODE TRIO ASSEMBLY, ALTERNATOR, 90 AMP ..........

DIPSTICK TUBE....................................................................

DIPSTICK, ENGINE OIL ......................................................

DISK, COUPLER,CONCAVE ADJUSTING CONTROLS ....

DISK, DRIVE WHEEL ..........................................................

DISK, ROTARY SCREEN ....................................................

DISPLACEMENT CONTROL VALVE KIT ............................

DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE ......

DISPLACEMENT CONTROL VALVE,HYDRO.DRIVE..........

DISPLACER, ROTARY SCREEN DRIVE BELT ..................

DIVIDER POINTS ..................................................................

DIVIDER, PLATFORM, EXTENSIONS ................................

DIVIDER, PLATFORM, LEFT-HAND ....................................

DIVIDER, PLATFORM, RIGHT-HAND..................................

DOME LIGHT ........................................................................

DOOR INSPECTION,SEPARATOR L.H.SIDE SHEET ........

DOOR, CHAFFER FRAME ..................................................

DOOR, CLEAN GRAIN ELEVATOR HOUSING ..................

DOOR, CLEAN GRAIN LOWER AUGER HOUSING ..........

DOOR, CLEAN GRAIN LOWER ELEVATOR HOUSING ....

DOOR, ELEVATOR ACCESS, GRAIN TANK ......................

DOOR, ENGINE COMPARTMENT MIDDLE ........................

DOOR, FEEDER HOUSE......................................................

DOOR, GRAIN TANK............................................................

DOOR, INSPECTION, GRAIN TANK....................................

DOOR, L.H. LOWER ............................................................

DOOR, LOADING AUGER AND HOUSING ........................

DOOR, REAR HOOD ............................................................

DOOR, RESERVOIR, GRAIN TANK ....................................

DOOR, ROTARY SCREEN ..................................................

DOOR, SHOE GRAIN SUPPLY AUGERS HOUSING ........

DOOR, STONE TRAP ..........................................................

DOOR, STONE TRAP ..........................................................

DOOR, TAILINGS ELEVATOR ............................................

DOOR, TAILINGS ELEVATOR HOUSING ..........................

DOOR, UPPER, ENGINE COMPARTMENT ........................

DOOR,CLEAN GRAIN ELEVATOR UPPER HOUSING ......

DOOR,INSPECTION,GR.TANK VERTICAL AUGER............

DOOR,INSPECTION,HOR.UNLDG.AUGER SWIVEL ..........

DOOR,INSPECTION,SEPARATOR R.H.SIDE SHEET ........

DOORS, CAB ........................................................................

DOORS, SEPARATOR FRONT............................................

DOORS, TOP, FEEDER HOUSE ........................................

DOORS, TOP, FEEDER HOUSE ........................................

DOWEL, HYDROSTATIC CHARGE PUMP ........................

DRAIN TUBES, EVAPORATOR ..........................................

DRAINCOCK, RADIATOR ....................................................

DRIVE ARM, CUTTERBAR ..................................................

DRIVE BELT TIGHTENER, KNIFE ......................................

DRIVE BELT TIGHTENER, PROPULSION..........................

DRIVE BELT TIGHTENERS, ROTARY SCREEN................

DRIVE BELTS, FEEDER HOUSE ........................................

DRIVE BELTS, FEEDER HOUSE ........................................

PAGE 170 - 37 90 - 3 140 - 15 120 - 93 120 - 43 120 - 133 30 - 33 150 - 30 50 - 51 70 - 5 50 - 18 50 - 19 40 - 64 40 - 65 40 - 66 20 - 28 20 - 28 120 - 15 60 - 7 20 - 79 50 - 49 50 - 46 50 - 45 20 - 81 100 - 45 100 - 14 100 - 13 100 - 11 40 - 41 80 - 5 120 - 85 120 - 114 120 - 99 120 - 101 130 - 3 80 - 18 110 - 21 130 - 3 130 - 3 90 - 27 120 - 123 80 - 7 130 - 3 20 - 73 120 - 73 120 - 3 120 - 9 90 - 9 120 - 135 80 - 17 120 - 107 130 - 29 130 - 31 80 - 3 90 - 25 80 - 1 110 - 11 110 - 13 50 - 51 90 - 53 20 - 83 100 - 23 100 - 26 50 - 57 20 - 81 170 - 8 170 - 9

GRID 3J9 3J10 3F8 2C20 3J11 3J9 3J10 5C17 5C17 2D11 2C8 4G18 3I12 4F22 4F23 2C2 3I9 3I20 3J9 3J10 4I25 4I21 4D19 5C20 3G20 2C22 2I18 2I19 2I16 2I20 2I18 2I6 2I17 2C4 2C4 3G21 3I17 3J5 3F14 2B18 4D6 5C20 4D6 5C16 5C16 3F17 4F21 3I14 4G6 4E18 4D7 4F19 5C20 4H17 3F16 2C9 2D17 2B13 2E6 3G23 4C20 4C21 5D9 1F18 3G25 5D9 5D1

DRIVE BRACKET, FEEDER CONVEYOR ..........................

DRIVE BRACKET, FEEDER CONVEYOR ..........................

DRIVE CASE, KNIFE ............................................................

DRIVE CENTER SECTION, HYDROSTATIC ......................

DRIVE CHAIN GUIDES, FEEDER CONVEYOR..................

DRIVE CHAIN, FEEDER CONVEYOR ................................

DRIVE CHAIN, FEEDER CONVEYOR ................................

DRIVE CHAINS AND SPROCKETS-RH ..............................

DRIVE CHAINS AND TIGHTENERS-RH ............................

DRIVE CHARGE PUMP MOUNTING, HYDROSTATIC ......

DRIVE CONTROL CABLE MOUNTING,HYDROSTATIC ....

DRIVE CONTROLS, SEPARATOR ......................................

DRIVE COUNTERSHAFT, FEEDER BEATER ....................

DRIVE COUNTERSHAFT,CLEAN GRAIN ELEVATOR ......

DRIVE COUNTERSHAFT,CLEAN GRAIN ELEVATOR ......

DRIVE HOUSING, FINAL......................................................

DRIVE HUB, FEEDER BEATER ..........................................

DRIVE IDLER, FEEDER CONVEYOR ................................

DRIVE IDLER, FEEDER CONVEYOR ................................

DRIVE IDLER, FEEDER CONVEYOR ................................

DRIVE IDLER, FEEDER HOUSE ........................................

DRIVE IDLER, SECONDARY COUNTERSHAFT ................

DRIVE IDLER, STRAW CHOPPER......................................

DRIVE IDLERS, FEEDER HOUSE ......................................

DRIVE LINE, AUGER DRIVE ..............................................

DRIVE MOTOR, HYDROSTATIC ........................................

DRIVE REEL HOSES, HYDRAULIC, BAT REEL ................

DRIVE REEL HOSES, HYDRAULIC, PICKUP REEL..........

DRIVE REEL HYDRAULIC HOSES ....................................

DRIVE REEL HYDRAULIC PUMP MTG.,HYDRO. ..............

DRIVE REEL LINES, HYDRAULIC, BAT REEL ..................

DRIVE REEL OIL LINES ON PLATFORM,HYDRO. ............

DRIVE REEL OIL LINES, HYDRAULIC ..............................

DRIVE SHAFT ......................................................................

DRIVE SHAFT AND BEARINGS ..........................................

DRIVE SHAFT, AUGER AND KNIFE ..................................

DRIVE SHAFT, FEEDER CONVEYOR ................................

DRIVE SHAFT, FEEDER HOUSE ........................................

DRIVE SHAFT, KNIFE AND AUGER ..................................

DRIVE SHAFT, TELESCOPING ..........................................

DRIVE SHEAVE, STRAW SPREADER ................................

DRIVE SHEAVES, FEEDER HOUSE ..................................

DRIVE SHIELD, STRAW SPREADER ................................

DRIVE SPROCKETS AND CHAINS, AUGER......................

DRIVE SPROCKETS AND CHAINS, KNIFE ........................

DRIVE TIGHTENER AND SHIELD, AUGER........................

DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR ..............

DRIVE TIGHTENER, FEEDER BEATER CHAIN ................

DRIVE TIGHTENER, LOADING AUGER ............................

DRIVE TIGHTENER, SHOE CRANKSHAFT ........................

DRIVE TIGHTENER, STRAW WALKER ..............................

DRIVE TIGHTENER,CLEAN GRAIN ELEVATOR ................

DRIVE TIGHTENERS, FEEDER HOUSE ............................

DRIVE TIGHTENERS,GRAIN TANK CROSS AUGER ........

DRIVE TUBE, KNIFE AND AUGER ....................................

DRIVE UNIT, HYDROSTATIC ..............................................

DRIVE UPPER OIL LINES, HYDROSTATIC........................

DRIVE WHEEL ......................................................................

DRIVE WHEEL BRAKES ......................................................

DRIVE, AUGER, PLATFORM ..............................................

DRIVE, BEATER....................................................................

DRIVE, BEATER, DUAL-RANGE..........................................

DRIVE, CLEAN GRAIN ELEVATOR ....................................

DRIVE, FUEL INJECTION PUMP ........................................

DRIVE, KNIFE ......................................................................

DRIVE, LOADING AUGER....................................................

DRIVE, PRIMARY COUNTERSHAFT TO CYLINDER ........

6622 COMBINE PC1746

PAGE 110 - 54 110 - 55 100 - 25 50 - 39 110 - 56 110 - 54 110 - 55 170 - 6 170 - 6 50 - 55 50 - 27 120 - 141 110 - 31 120 - 120 120 - 121 50 - 20 110 - 28 110 - 39 110 - 54 110 - 55 140 - 17 140 - 13 120 - 65 170 - 9 100 - 67 50 - 41 70 - 81 70 - 82 70 - 79 70 - 83 70 - 81 70 - 69 70 - 80 50 - 23 50 - 23 100 - 69 110 - 36 110 - 50 100 - 31 50 - 11 120 - 51 170 - 9 120 - 51 170 - 5 170 - 5 100 - 35 120 - 119 110 - 33 120 - 129 120 - 91 120 - 53 120 - 117 170 - 9 130 - 21 100 - 33 50 - 28 50 - 61 50 - 6 60 - 7 100 - 71 120 - 39 120 - 41 170 - 23 30 - 30 100 - 73 170 - 23 170 - 15

(16-OCT-86) PN=12

1A13 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 5D5 5D5 4G8 4E6 3F2 3G4 5D16 5D17 4C17 3I3 3I4 3J6 4C5 4C12 4C7 4C11 4C10 4C9 4C12 4B14 4C21 1E2

DRIVE, STRAW CHOPPER ..................................................

DRIVE, STRAW SPREADER................................................

DRIVER,SLIP CLUTCH,LOWER TAILINGS AUGER ..........

DRIVER,SLIP CLUTCH,SHOE GR.SUPPLY AUGERS ......

DRIVESHAFT DECAL ..........................................................

DRIVESHAFT DECAL ..........................................................

DRIVESHAFT DECAL ..........................................................

DRIVESHAFT DECAL ..........................................................

DRUM, BEATER....................................................................

DRUM, FEEDER BEATER....................................................

DRUM, FEEDER BEATER....................................................

DRUM, FEEDER CONVEYOR IDLER..................................

DUAL-RANGE CYLINDER DR. (CYLINDER INTERMEDIATE DR. SUPPORT) ....................................

DUAL-RANGE CYLINDER DRIVE ARM ..............................

DUAL-RANGE CYLINDER DRIVE GEAR CASE ................

DUAL-RANGE CYLINDER DRIVE GEAR CASE SHIELD ..............................................................................

DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM............

DUAL-RANGE CYLINDER DRIVE PINION GEARS ............

DUAL-RANGE CYLINDER DRIVE TIGHTENER..................

DUAL-RANGE CYLINDER DRIVE, RASP-BAR CYLINDER ........................................................................

DUAL-RANGE, BEATER DRIVE ..........................................

DUCT, ROTARY SCREEN....................................................

PAGE 170 - 19 170 - 19 120 - 131 120 - 77 100 - 19 100 - 47 170 - 30 170 - 31 120 - 35 110 - 22 110 - 23 110 - 51 120 - 22 120 - 30 120 - 24 120 - 29 120 - 27 120 - 26 120 - 30 120 - 6 120 - 41 20 - 73

E 3F23 3E16 1H11 1H23 1J15 1G21 1F4 1F4 5D7 4F11 2E16 1J9 2F1 2F8 4I4 2H18 1H11 3B23 3B25 3B20 3B22 3C1 1H10 1D24 1D25 1B8 1D3 1C9 1D1 1E14 1C18 1C20 1C22 4I11 4I11 4I11 5C23 4I11

ECCENTRIC SPIDER, PICKUP REEL ................................

ECCENTRIC, DOUBLE, PICKUP REEL (L.H.) ....................

ELEC.COV.PLATES,ENG.COMPARTMENT FIREWALL ....

ELECTRIC CLUTCH CIRCUIT BREAKER ..........................

ELECTRICAL CONNECTOR SERVICE KIT ........................

ELECTROMAGNETIC CLUTCH, HEADER ..........................

ELEMENT, PRIMARY, AIR CLEANER ................................

ELEMENT, SAFETY, AIR CLEANER ..................................

ELEVATOR, CLEAN GRAIN ................................................

ELEVATOR, CLEAN GRAIN HOUSING ..............................

EMBLEM, STEERING WHEEL ............................................

END FRAME, STARTER COMMUTATOR ..........................

END, POWER STEERING CYLINDER ................................

END, STEERING TIE RODS ................................................

END,AUGER,TUBE,HORIZONTAL UNLDG.AUGER............

END,ROD,UNLOADING AUGER SWING HYD. MTG. ........

ENG.COMPARTMENT FIREWALL ELEC.COV.PLATES ....

ENGINE COMPARTMENT MIDDLE DOOR AND FRAME ..

ENGINE COMPARTMENT PANEL, FRONT ........................

ENGINE COMPARTMENT REAR SHEET ..........................

ENGINE COMPARTMENT UPPER DOOR ..........................

ENGINE COMPARTMENT WALKWAY ................................

ENGINE COMPARTMENT WIRING HARNESSES..............

ENGINE COOLANT HEATER ..............................................

ENGINE COOLANT HEATER ..............................................

ENGINE OIL ..........................................................................

ENGINE OIL COOLER ..........................................................

ENGINE OIL DIPSTICK ........................................................

ENGINE OIL FILTER ............................................................

ENGINE OIL PRESSURE GAUGE LINE ............................

ENGINE OIL PUMP (TH 01) ................................................

ENGINE OIL PUMP (TH 01) ................................................

ENGINE OIL PUMP (TH 05) ................................................

ENGINE POWERSHAFT ......................................................

ENGINE POWERSHAFT BELTS ..........................................

ENGINE POWERSHAFT BRUSH ........................................

ENGINE POWERSHAFT DRIVE SHEAVE ..........................

ENGINE POWERSHAFT HOUSING ....................................

6622 COMBINE PC1746

(16-OCT-86)

100 - 42 100 - 7 40 - 24 40 - 37 40 - 80 40 - 9 30 - 15 30 - 15 170 - 21 120 - 108 60 - 17 40 - 74 60 - 27 60 - 35 130 - 33 70 - 57 40 - 24 80 - 18 80 - 20 80 - 15 80 - 17 80 - 21 40 - 23 20 - 70 20 - 71 20 - 1 20 - 48 20 - 28 20 - 46 20 - 86 20 - 38 20 - 40 20 - 42 140 - 3 140 - 3 140 - 3 170 - 12 140 - 3

GRID 4I11 4I11 5D15 5D15 5D15 1D23 1D23 1D20 1B16 1B20 1B24 1D23 1C17 1C17 1B9 1H21 3E4 3E4 3E4 1D11 1F6 1C11 3E4 3F24 4D2 1D23 4H6 4H6 4H6 4H6 3G19 4H6 3E22 4I23 3H3 4C5

ENGINE POWERSHAFT SEAL PLATE................................

ENGINE POWERSHAFT SHEAVE ......................................

ENGINE R.H. SHEAVES ......................................................

ENGINE R.H. SIDE BELT ....................................................

ENGINE R.H. TIGHTENERS ................................................

ENGINE RAIL ........................................................................

ENGINE RAIL EXTENSION ..................................................

ENGINE REBUILD GASKET KIT..........................................

ENGINE SHORT BLOCK (TH 01) ........................................

ENGINE SHORT BLOCK (TH 01) ........................................

ENGINE SHORT BLOCK (TH 05) ........................................

ENGINE SUPPORTS ............................................................

ENGINE TEMPERATURE SENDER ....................................

ENGINE TEMPERATURE SWITCH ....................................

ENGINE VALVE STEM LUBRICANT....................................

ETHER STARTING AID SWITCH ........................................

EVAPORATOR AND AIR CONDITIONER LINES................

EVAPORATOR CORE ..........................................................

EVAPORATOR DRAIN TUBES ............................................

EXHAUST MANIFOLD ..........................................................

EXHAUST PIPE ....................................................................

EXHAUST VALVES ..............................................................

EXPANSION VALVE, AIR CONDITIONER ..........................

EXTENSION CYL. ROD, REEL SUPPORT ARMS ............

EXTENSION PAN, STRAW WALKER..................................

EXTENSION, ENGINE RAIL ................................................

EXTENSION, FRONT, GRAIN TANK ..................................

EXTENSION, L.H., GRAIN TANK ........................................

EXTENSION, R.H., GRAIN TANK ........................................

EXTENSION, REAR, GRAIN TANK ....................................

EXTENSIONS, FLIGHT (CROSS AUGER) ..........................

EXTENSIONS, GRAIN TANK ..............................................

EXTENSIONS, PLATFORM DIVIDER ..................................

EYEBOLT, DECLUTCHING IDLER ......................................

EYEBOLT, KNIFE DRIVE......................................................

EYEBOLTS, CYLINDER INTERMEDIATE DR. SUPPORT BRACES (DUAL-RANGE CYL. DR.) ............

PAGE 140 - 3 140 - 3 170 - 29 170 - 29 170 - 29 20 - 69 20 - 69 20 - 66 20 - 10 20 - 14 20 - 18 20 - 69 20 - 37 20 - 37 20 - 2 40 - 35 90 - 53 90 - 53 90 - 53 20 - 56 30 - 17 20 - 30 90 - 53 100 - 43 120 - 47 20 - 69 130 - 9 130 - 9 130 - 9 130 - 9 100 - 65 130 - 9 100 - 14 140 - 15 100 - 76 120 - 22

F 4E20 3B20 1I24 1I25 1J1 4E22 4E24 1E12 3B7 3G6 3I14 3I12 3I8 3I9 3I3 3I4 3I5 3I6 3I7 3I5 3I6 3I7 3I5 3I6 3I7 3I5

FAN HOUSING, CLEANING ................................................

FAN SHROUD ......................................................................

FAN, ALTERNATOR, 72 AMP ..............................................

FAN, ALTERNATOR, 72 AMP ..............................................

FAN, ALTERNATOR, 90 AMP ..............................................

FAN, CLEANING ..................................................................

FAN, CLEANING, SPEED CONTROL LINKAGE ................

FAN, RADIATOR ..................................................................

FEED PLATE, SEPARATOR FRONT ..................................

FEED PLATES, MAIN SILL, AND SUPPORTS ..................

FEEDER BEATER CHAIN DRIVE TIGHTENER..................

FEEDER BEATER DRIVE COUNTERSHAFT......................

FEEDER BEATER DRIVE HUB............................................

FEEDER BEATER DRIVE HUB AND SLIP CLUTCH ........

FEEDER BEATER DRUM ....................................................

FEEDER BEATER DRUM ....................................................

FEEDER BEATER FINGERS................................................

FEEDER BEATER FINGERS................................................

FEEDER BEATER FINGERS................................................

FEEDER BEATER HEADS ..................................................

FEEDER BEATER HEADS ..................................................

FEEDER BEATER HEADS ..................................................

FEEDER BEATER SHAFTS..................................................

FEEDER BEATER SHAFTS..................................................

FEEDER BEATER SHAFTS..................................................

FEEDER BEATER SHIELDS ................................................

120 - 93 80 - 15 40 - 64 40 - 65 40 - 66 120 - 95 120 - 97 20 - 84 80 - 1 100 - 50 110 - 33 110 - 31 110 - 27 110 - 28 110 - 22 110 - 23 110 - 24 110 - 25 110 - 26 110 - 24 110 - 25 110 - 26 110 - 24 110 - 25 110 - 26 110 - 24

10-13 PN=13

1A14 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 3I6 3I7 3I8 3I7 3I10 3I11 3I15 3I16 3J9 3J10 3J9 3J10 3J11 3I20 3J9 3J10 3I17 3I18 3J6 3J6 3H21 3H23 3H25 3H13 5C21 5C19 5C20 4I25 5C19 5C20 3J5 5C19 5C20 5C19 5C20 3I1 3I2 1H14 3I19 3I21 3J4 3J4 1H15 1H16 3J4 3J8 3J8 3H13 3H13 3J13 3J12 3I1 3I2 3J5 5C21 3H17 3H19 3H15 3H17 3H19 3J2 3J2 3J2 1I4 1E18 1D1 1E22

10-14

FEEDER BEATER SHIELDS ................................................

FEEDER BEATER SHIELDS ................................................

FEEDER BEATER SLIP CLUTCH........................................

FEEDER BEATER SPROCKETS ........................................

FEEDER CONVEYOR CHAIN ..............................................

FEEDER CONVEYOR CHAIN ..............................................

FEEDER CONVEYOR CHAIN SHIELD ................................

FEEDER CONVEYOR CHAIN SHIELDS ............................

FEEDER CONVEYOR DRIVE BRACKET ............................

FEEDER CONVEYOR DRIVE BRACKET ............................

FEEDER CONVEYOR DRIVE CHAIN..................................

FEEDER CONVEYOR DRIVE CHAIN..................................

FEEDER CONVEYOR DRIVE CHAIN GUIDES ..................

FEEDER CONVEYOR DRIVE IDLER ..................................

FEEDER CONVEYOR DRIVE IDLER ..................................

FEEDER CONVEYOR DRIVE IDLER ..................................

FEEDER CONVEYOR DRIVE SHAFT ................................

FEEDER CONVEYOR IDLER SHAFT..................................

FEEDER CONVEYOR IDLER SHAFT..................................

FEEDER DRUM, CONVEYOR IDLER..................................

FEEDER HOUSE BOTTOM SHEETS ..................................

FEEDER HOUSE BOTTOM SHEETS, REVERSER ............

FEEDER HOUSE BOTTOM SHEETS, REVERSER ............

FEEDER HOUSE BRACES ..................................................

FEEDER HOUSE CHAINS....................................................

FEEDER HOUSE DRIVE BELTS ........................................

FEEDER HOUSE DRIVE BELTS ........................................

FEEDER HOUSE DRIVE IDLER ..........................................

FEEDER HOUSE DRIVE IDLERS........................................

FEEDER HOUSE DRIVE IDLERS........................................

FEEDER HOUSE DRIVE SHAFT ........................................

FEEDER HOUSE DRIVE SHEAVES....................................

FEEDER HOUSE DRIVE SHEAVES....................................

FEEDER HOUSE DRIVE TIGHTENERS..............................

FEEDER HOUSE DRIVE TIGHTENERS..............................

FEEDER HOUSE FRAME ....................................................

FEEDER HOUSE FRAME ....................................................

FEEDER HOUSE HEADER TACHOMETER HARNESS ....

FEEDER HOUSE LEFT-HAND SHIELD ..............................

FEEDER HOUSE LOWER DRIVE TIGHTENER ................

FEEDER HOUSE LOWER MOUNTING ..............................

FEEDER HOUSE LOWER SHAFT ......................................

FEEDER HOUSE LOWER SHAFT SPEED SENSOR ........

FEEDER HOUSE LOWER SHAFT SPEED SENSOR ........

FEEDER HOUSE LOWER SHEAVE ....................................

FEEDER HOUSE MIDDLE BELT BRACES ........................

FEEDER HOUSE MIDDLE BELT IDLERS ..........................

FEEDER HOUSE PIVOT ......................................................

FEEDER HOUSE ROCKER ..................................................

FEEDER HOUSE SHIELD (L.H.)..........................................

FEEDER HOUSE SHIELD (R.H.) ........................................

FEEDER HOUSE SIDE SHEETS ........................................

FEEDER HOUSE SIDE SHEETS ........................................

FEEDER HOUSE SLIP CLUTCH ........................................

FEEDER HOUSE SPROCKETS ..........................................

FEEDER HOUSE TOP DOORS ..........................................

FEEDER HOUSE TOP DOORS ..........................................

FEEDER HOUSE TOP SHEETS ..........................................

FEEDER HOUSE TOP SHEETS ..........................................

FEEDER HOUSE TOP SHEETS ..........................................

FEEDER HOUSE UPPER SHAFT........................................

FEEDER HOUSE UPPER SHEAVE ....................................

FEEDER HOUSE UPPER SPROCKETS ............................

FIELD LIGHTS ......................................................................

FILLER NECK, FUEL TANK ................................................

FILTER, ENGINE OIL............................................................

FILTER, FUEL ......................................................................

PAGE 110 - 25 110 - 26 110 - 27 110 - 26 110 - 29 110 - 30 110 - 34 110 - 35 110 - 54 110 - 55 110 - 54 110 - 55 110 - 56 110 - 39 110 - 54 110 - 55 110 - 36 110 - 37 110 - 51 110 - 51 110 - 15 110 - 17 110 - 19 110 - 7 170 - 10 170 - 8 170 - 9 140 - 17 170 - 8 170 - 9 110 - 50 170 - 8 170 - 9 170 - 8 170 - 9 110 - 20 110 - 21 40 - 27 110 - 38 110 - 41 110 - 49 110 - 49 40 - 28 40 - 29 110 - 49 110 - 53 110 - 53 110 - 7 110 - 7 110 - 58 110 - 57 110 - 20 110 - 21 110 - 50 170 - 10 110 - 11 110 - 13 110 - 9 110 - 11 110 - 13 110 - 47 110 - 47 110 - 47 40 - 43 30 - 3 20 - 46 30 - 7

GRID 1F7 1F8 1F10 2F15 2D15 5C2 2C3 2C3 2C4 2C3 2C2 2C4 4E13 3F20 3F23 3I5 3I6 3I7 3F12 3G16 1H3 4D14 4D12 3B20 4G20 4G19 2D16 1F3 1F6 1H14 3G19 3G5 3C10 3C12 3C10 2G14 2G15 2I21 1C1 3G4 3B11 3B9 3G4 4E13 3B20 3B23 3I1 3I2 3C10 3C14 4E11 5D21 4H14 1F9 1E22 1F7 1F8 1F10 1H8 1G4 1G7 1F12 1F14 1F16 1F20 1F18

FILTER, FUEL (TH 01)..........................................................

FILTER, FUEL (TH 05)..........................................................

FILTER, FUEL (TH 05)..........................................................

FILTER, HYDRAULIC OIL RESERVOIR ..............................

FILTER, HYDROSTATIC DRIVE OIL RESERVOIR ............

FILTER, LEVELING SYSTEM OIL LINES............................

FINAL DRIVE AXLE ..............................................................

FINAL DRIVE BEARINGS ....................................................

FINAL DRIVE BEARINGS ....................................................

FINAL DRIVE GEAR ............................................................

FINAL DRIVE HOUSING ......................................................

FINAL DRIVE PINION ..........................................................

FINGER BAR ........................................................................

FINGER, PICKUP REEL ......................................................

FINGER, PICKUP REEL ECCENTRIC SPIDER ..................

FINGERS, FEEDER BEATER ..............................................

FINGERS, FEEDER BEATER ..............................................

FINGERS, FEEDER BEATER ..............................................

FINGERS, PLATFORM..........................................................

FINGERS, PLATFORM AUGER ..........................................

FINGERS, TRASH (HARVESTRAK) ....................................

FINS, PLATE, STRAW CHOPPER ......................................

FINS, STRAW CHOPPER ....................................................

FIREWALL ............................................................................

FITTING,GREASE,L.H.SIDE LUBE BANK SYSTEM ..........

FITTING,GREASE,R.H.SIDE LUBE BANK SYSTEM ..........

FITTINGS, HYDROSTATIC DRIVE OIL ..............................

FLANGE, AIR INTAKE TUBES ............................................

FLANGE, EXHAUST PIPE ....................................................

FLASHER, SIGNAL ..............................................................

FLIGHT EXTENSIONS (CROSS AUGER) ..........................

FLOOR STRIPPER................................................................

FLOORBOARD, OPERATOR’S PLATFORM........................

FLOORMAT, L.H. REAR CAB ..............................................

FLOORMAT, OPERATOR’S PLATFORM ............................

FLOW CONTROL PLUG ......................................................

FLOW CONTROL PLUG KIT................................................

FLOW CONTROL VALVE,HYDRO.DRIVE REEL ................

FLYWHEEL ............................................................................

FRAME ..................................................................................

FRAME AND SEPARATOR L.H. SIDE SHEET ..................

FRAME AND SEPARATOR R.H. SIDE SHEET ..................

FRAME SHIELD ....................................................................

FRAME, CHAFFER ..............................................................

FRAME, CORNER ................................................................

FRAME, ENGINE COMPARTMENT ....................................

FRAME, FEEDER HOUSE....................................................

FRAME, FEEDER HOUSE....................................................

FRAME, OPERATOR’S PLATFORM ....................................

FRAME, SEAT ......................................................................

FRAME, SIEVE......................................................................

FRONT AND REAR DECALS ..............................................

FRONT AND REAR GRAIN TANK AUGER COVERS, ADJ. ..................................................................................

FUEL CHECK VALVE ..........................................................

FUEL FILTER ........................................................................

FUEL FILTER (TH 01) ..........................................................

FUEL FILTER (TH 05) ..........................................................

FUEL FILTER (TH 05) ..........................................................

FUEL GAUGE SENDING UNIT ............................................

FUEL INJECTION NOZZLE ..................................................

FUEL INJECTION NOZZLE ..................................................

FUEL INJECTION NOZZLES (TH 01)..................................

FUEL INJECTION NOZZLES (TH 05)..................................

FUEL INJECTION PUMP ......................................................

FUEL INJECTION PUMP DELIVERY VALVE......................

FUEL INJECTION PUMP DRIVE..........................................

6622 COMBINE PC1746

PAGE 30 - 18 30 - 19 30 - 22 70 - 3 50 - 59 150 - 23 50 - 21 50 - 21 50 - 23 50 - 21 50 - 20 50 - 23 120 - 85 100 - 39 100 - 42 110 - 24 110 - 25 110 - 26 100 - 29 100 - 61 40 - 16 120 - 60 120 - 58 80 - 15 120 - 143 120 - 142 50 - 60 30 - 14 30 - 17 40 - 27 100 - 65 100 - 49 90 - 7 90 - 9 90 - 7 70 - 27 70 - 28 70 - 84 20 - 20 100 - 47 80 - 5 80 - 3 100 - 47 120 - 85 80 - 15 80 - 18 110 - 20 110 - 21 90 - 7 90 - 11 120 - 83 170 - 35 130 - 18 30 - 21 30 - 7 30 - 18 30 - 19 30 - 22 40 - 21 30 - 42 30 - 45 30 - 24 30 - 26 30 - 28 30 - 33 30 - 30

(16-OCT-86) PN=14

1A15 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1G1 1F17 1E22 1F7 1F12 1F8 1F10 1F14 1E22 1E22 1G6 1G10 1G8 1G9 1E20 1E18 1E18 1E18 1E20 1F16 1G3 5C5 5C5 1H21

PAGE FUEL INJECTION PUMP GOVERNOR LEVERS ................ 30 - 38 FUEL INJECTION PUMP HOUSING .................................... 30 - 29 FUEL LINES .......................................................................... 30 - 7 FUEL PIPES (TH 01) ............................................................ 30 - 18 FUEL PIPES (TH 01) ............................................................ 30 - 24 FUEL PIPES (TH 05) ............................................................ 30 - 19 FUEL PIPES (TH 05) ............................................................ 30 - 22 FUEL PIPES (TH 05) ............................................................ 30 - 26 FUEL PUMP .......................................................................... 30 - 7 FUEL PUMP TRANSISTOR .................................................. 30 - 7 FUEL SHUT-OFF BRACKET ................................................ 30 - 44 FUEL SHUT-OFF BRACKET ................................................ 30 - 48 FUEL SHUT-OFF CONTROL................................................ 30 - 46 FUEL SHUT-OFF CONTROL................................................ 30 - 47 FUEL TANK .......................................................................... 30 - 5 FUEL TANK AND SUPPORTS ............................................ 30 - 3 FUEL TANK BREATHER ...................................................... 30 - 3 FUEL TANK FILLER NECK .................................................. 30 - 3 FUEL TANK SUPPORT ........................................................ 30 - 5 FUEL TRANSFER PUMP...................................................... 30 - 28 FUEL TRANSFER PUMP...................................................... 30 - 41 FUSE AND LEVELING SWITCHES .................................... 150 - 27 FUSE HOLDER, LEVELING.................................................. 150 - 27 FUSES, INSTRUMENT PANEL ............................................ 40 - 35

G 1D20 1D20 1D25 2D8 2B20 2D5 4I23 1H21 1H23 3I23 4C7 4G4 4H23 4I5 1C8 4B22 1C5 2D8 2C3 2D8 2F18 4B22 4I5 4H23 2B25 2C1 4C9 2B22 2B24 2B12 2B8 2B10 2F15 1F21 1F23 1G1 1H3 4G24 4H17

GASKET KIT, CYLINDER HEAD..........................................

GASKET KIT, ENGINE REBUILD ........................................

GASKET, ENGINE COOLANT HEATER..............................

GASKET, HYDROSTATIC CHARGE PUMP ........................

GASKET,TRANSM. AND DIFFERENTIAL HSG...................

GASKET,VALVE,HYDRO.DR.DISPLACEMENT CTL. ..........

GAUGE, DECLUTCHING IDLER ..........................................

GAUGES ................................................................................

GAUGES, INSTRUMENT PANEL ........................................

GEAR BOX, REVERSER ......................................................

GEAR CASE, DUAL-RANGE CYLINDER DRIVE ................

GEAR CASE, LOADING AUGER ........................................

GEAR CASE, LOWER, VERTICAL AUGER ........................

GEAR CASE,HORIZONTAL UNLDG.AUGER DRIVE..........

GEAR COVER, TACHOMETER DRIVE ..............................

GEAR, BEVEL, CONCAVE ADJUSTING CONTROLS ........

GEAR, CAMSHAFT ..............................................................

GEAR, DRIVE, HYDROSTATIC CHARGE PUMP ..............

GEAR, FINAL DRIVE ............................................................

GEAR, IDLER, HYDROSTATIC CHARGE PUMP................

GEAR, MAIN HYDRAULIC PUMP........................................

GEAR, WORM, CONCAVE ADJUSTING CONTROLS........

GEAR,BEVEL,HORIZONTAL UNLDG.AUGER DRIVE ........

GEAR,BEVEL,VERTICAL AUG.LOWER GEAR CASE ........

GEARS, DIFFERENTIAL ......................................................

GEARS, DIFFERENTIAL ......................................................

GEARS, PINION, DUAL-RANGE CYLINDER DRIVE ..........

GEARS, TRANSMISSION ....................................................

GEARS, TRANSMISSION ....................................................

GEARSHIFT CABLES AND MOUNTINGS ..........................

GEARSHIFT LEVER ASSEMBLY ........................................

GEARSHIFT RANGE SHIFTER AND SUPPORT ................

GLASS, HYDRAULIC OIL RESERVOIR ..............................

GOVERNOR HOUSING, INJECTION PUMP (TH 01) ........

GOVERNOR HOUSING, INJECTION PUMP (TH 05) ........

GOVERNOR LEVERS, FUEL INJECTION PUMP ..............

GRAIN LOSS CONSOLE, HARVESTRAK ..........................

GRAIN TANK ........................................................................

GRAIN TANK CROSS AUGER DRIVE TIGHTENERS........

6622 COMBINE PC1746

(16-OCT-86)

20 - 66 20 - 66 20 - 71 50 - 51 50 - 13 50 - 48 140 - 15 40 - 35 40 - 37 110 - 43 120 - 24 120 - 127 130 - 27 130 - 34 20 - 27 120 - 15 20 - 24 50 - 51 50 - 21 50 - 51 70 - 6 120 - 15 130 - 34 130 - 27 50 - 18 50 - 19 120 - 26 50 - 15 50 - 17 50 - 5 50 - 1 50 - 3 70 - 3 30 - 34 30 - 36 30 - 38 40 - 16 130 - 3 130 - 21

GRID 4H6 4H11 4H13 4H13 1G16 1G19 4H12 4H2 4H19 4H20 4H25 4H25 4H15 4B17 1I22 2G25 4G18 4H7 4F6 4D8 4D10 3F22 4D24 3F3 3G8 3G9 3F5 3G10 4D20 4H9 3J11 4I24 3B22

GRAIN TANK EXTENSIONS ................................................

GRAIN TANK FRONT CROSS AUGER ..............................

GRAIN TANK INNER UNLOADING AUG.CHANNELS ........

GRAIN TANK INNER UNLOADING AUGER COVERS ......

GRAIN TANK L.H. HARNESS ..............................................

GRAIN TANK LIGHTS ..........................................................

GRAIN TANK REAR CROSS AUGER ................................

GRAIN TANK SKIRTS ..........................................................

GRAIN TANK SUMP HOUSING AND SHIELD....................

GRAIN TANK SUMP HOUSING AND SHIELD....................

GRAIN TANK VERTICAL AUGER........................................

GRAIN TANK VERTICAL HOUSING....................................

GRASS SEED UNLOADING AUGER COVERS ATT. ........

GRATE, BEATER ..................................................................

GRILLE, RADIO ....................................................................

GRIP, HANDLE, UNLOADING AUGER SWING ..................

GRIP, SEPARATOR DRIVE CONTROLS ............................

GRIP,LEVER,UNLDG.AUGER CONTROL LEVER ..............

GUARD, CLEAN GRAIN LOWER ELEVATOR ....................

GUARD, HANDLE, STRAW CHOPPER HOUSING ............

GUARD, HANDLE, STRAW CHOPPER HOUSING ............

GUARD, PICKUP REEL........................................................

GUARD, STRAW SPREADER..............................................

GUARDS AND KNIVES ........................................................

GUARDS AND KNIVES ........................................................

GUARDS, CUTTERBAR KNIFE (NON-CLOG) ....................

GUARDS, LIFTING................................................................

GUARDS, LIFTING................................................................

GUIDE, BELT, STRAW CHOPPER ROTOR........................

GUIDE,BELT,UNLOADING AUGER COUNTERSHAFT ......

GUIDES, FEEDER CONVEYOR DRIVE CHAIN..................

GUIDES,BELT,SEPARATOR,UNLDG.AUGER DR...............

GUSSET, ENGINE COMPARTMENT UPPER DOOR ........

PAGE 130 - 9 130 - 15 130 - 17 130 - 17 40 - 3 40 - 7 130 - 16 130 - 5 130 - 23 130 - 24 130 - 29 130 - 29 130 - 19 120 - 9 40 - 61 70 - 39 120 - 141 130 - 11 120 - 103 120 - 54 120 - 56 100 - 41 120 - 71 100 - 20 100 - 52 100 - 53 100 - 22 100 - 55 120 - 67 130 - 13 110 - 56 140 - 16 80 - 17

H 2D5 3B20 4D8 4D10 3I25 4D16 3D3 3C6 4E24 1F6 1H25 1H6 1I18 1I14 1H12 3D16 1H14 1G16 1H5 1I16 1J12 1G16 1G16 1H8 1I8 1I10 1I10 1G16 5C4 1H19

HANDLE, CONTROL ............................................................

HANDLE, ENGINE COMPARTMENT REAR SHEET ..........

HANDLE, GUARD, STRAW CHOPPER HOUSING ............

HANDLE, GUARD, STRAW CHOPPER HOUSING ............

HANDLE, REVERSER CONTROL........................................

HANDLE, STRAW CHOPPER ..............................................

HANDLES, CAB DOOR ........................................................

HANDRAIL, L.H. DOOR ........................................................

HANDWHEEL,CLEANING FAN SPD.CTL.LINKAGE ..........

HANGER, EXHAUST PIPE ..................................................

HARNESS AND BLOWER,CAB ROOF WIRING ................

HARNESS BRACKET, REAR CAB ......................................

HARNESS, ADAPTER, AM RADIO ......................................

HARNESS, AM-FM STEREOPHONIC RADIO ....................

HARNESS, CIRCUIT BREAKER ..........................................

HARNESS, COMPRESSOR..................................................

HARNESS, FEEDER HOUSE HEADER TACHOMETER ....

HARNESS, GRAIN TANK, L.H. ............................................

HARNESS, HARVESTRAK ADAPTER ................................

HARNESS, KIT ......................................................................

HARNESS, MAGNETIC PICK-UP ........................................

HARNESS, REAR HOOD......................................................

HARNESS, SEPARATOR, L.H. ............................................

HARNESS, SEPARATOR, RIGHT-HAND ............................

HARNESS, SPEAKER, AM ..................................................

HARNESS, STEREOPHONIC RADIO ..................................

HARNESS, STEREOPHONIC TAPE PLAYER ....................

HARNESS, UNLOADING AUGER ........................................

HARNESS, WIRING, FRONT AND REAR LEVELING ........

HARNESS, WIRING, INSTRUMENT PANEL ......................

50 - 48 80 - 15 120 - 54 120 - 56 110 - 45 120 - 62 90 - 25 90 - 3 120 - 97 30 - 17 40 - 39 40 - 19 40 - 57 40 - 53 40 - 25 90 - 38 40 - 27 40 - 3 40 - 18 40 - 55 40 - 77 40 - 3 40 - 3 40 - 21 40 - 47 40 - 49 40 - 49 40 - 3 150 - 25 40 - 33

10-15 PN=15

1A16 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1H14 1H14 1G16 1G24 1H10 1H5 1H23 1H3 1H3 1H3 1C11 1G21 3D8 3I5 3I6 3I7 3E5 3E5 3E4 3E6 1D24 1D25 1I1 3D17 3B7 4F2 3B20 3B22 4G24 4H25 3B7 5C5 4F4 3B13 4H4 4I5 4I4 4I2 4I4 1H14 1F6 4I23 4G20 2I24 4G19 2E25 4I6 2G20 2G22 5B25 2E24 1E11 2I16 3E6 3E5 2I18 2I19 2J4 2D19 2D20 2D16 5C2 2H15 1F5 2H14 1H21 4G15

10-16

HARNESS, WIRING, LIGHTS, L.H.......................................

HARNESS, WIRING, OPERATOR’S PLATFORM................

HARNESS, WIRING, REAR HOOD, L.H. ............................

HARNESS,LOW SHAFT SPEED MONITOR’S ....................

HARNESSES, WIRING, ENGINE COMPARTMENT............

HARVESTRAK ADAPTER HARNESS..................................

HARVESTRAK CIRCUIT BREAKER ....................................

HARVESTRAK COMBINE MONITOR ..................................

HARVESTRAK CONTROL PANEL ......................................

HARVESTRAK, PREAMPLIFIER ..........................................

HEAD, CYLINDER ................................................................

HEADER ELECTROMAGNETIC CLUTCH ..........................

HEADLINER, CAB ROOF ....................................................

HEADS, FEEDER BEATER ..................................................

HEADS, FEEDER BEATER ..................................................

HEADS, FEEDER BEATER ..................................................

HEATER CONTROL HOSES................................................

HEATER CONTROL VALVE ................................................

HEATER CORE ....................................................................

HEATER HOSES ..................................................................

HEATER, ENGINE COOLANT..............................................

HEATER, ENGINE COOLANT..............................................

HI PRESSURE SWITCH LIGHT ASSEMBLY ......................

HI PRESSURE SWITCH, AIR CONDITIONER ....................

HINGE ROD, SEPARATOR FRONT ....................................

HINGE, CLEAN GRAIN LOWER AUGER HOUSING..........

HINGE, ENGINE COMPARTMENT REAR SHEET..............

HINGE, ENGINE COMPARTMENT UPPER DOOR ............

HINGE, GRAIN TANK ..........................................................

HINGE, GRAIN TANK VERTICAL AUGER ..........................

HINGE, SEPARATOR FRONT..............................................

HOLDER, FUSE, LEVELING ................................................

HOOD, CLEAN GRAIN LOWER ELEVATOR HOUSING ....

HOOD, REAR ........................................................................

HORIZONTAL UNLDG. AUGER SWIVEL SHROUD ..........

HORIZONTAL UNLOADING AUG.DRIVE GEAR CASE......

HORIZONTAL UNLOADING AUGER ..................................

HORIZONTAL UNLOADING AUGER SWIVEL ....................

HORIZONTAL UNLOADING HOUSING ..............................

HORN ....................................................................................

HOSE, ASPIRATOR ..............................................................

HOSE, DECLUTCHING IDLER ............................................

HOSE, L.H. SIDE LUBE BANK SYSTEM ............................

HOSE, PLATFORM LIFT OIL LINES ..................................

HOSE, R.H. SIDE LUBE BANK SYSTEM............................

HOSE, STEERING LOWER OIL LINES (REAR) ................

HOSE, UNLOADING AUGER LUBE BANK SYSTEM ........

HOSES AND LINES, HYDRAULIC OIL................................

HOSES AND LINES, HYDRAULIC OIL................................

HOSES AND LINES, LEVELING ..........................................

HOSES AND OIL LINES, STEERING - FRONT..................

HOSES AND RADIATOR ......................................................

HOSES, DRIVE REEL HYDRAULIC ....................................

HOSES, HEATER..................................................................

HOSES, HEATER CONTROL ..............................................

HOSES, HYDRAULIC DRIVE REEL, BAT REEL ................

HOSES, HYDRAULIC DRIVE REEL, PICKUP REEL..........

HOSES, HYDRAULIC LIFT REEL ........................................

HOSES, HYDROSTATIC DRIVE LOWER OIL ....................

HOSES, HYDROSTATIC DRIVE LOWER OIL ....................

HOSES, HYDROSTATIC DRIVE OIL ..................................

HOSES, LEVELING SYSTEM OIL LINE ..............................

HOSES, UNLOADING AUGER SWING HYD. OIL ..............

HOSES,AIR INTAKE-AIR CLEANER TO MANIFOLD..........

HOSES,UNLOADING AUGER SWING HYD.OIL ................

HOUR METER ......................................................................

HOUSING AND AUGER, UPPER TAILINGS ......................

PAGE 40 - 27 40 - 27 40 - 3 40 - 13 40 - 23 40 - 18 40 - 37 40 - 16 40 - 16 40 - 16 20 - 30 40 - 9 90 - 30 110 - 24 110 - 25 110 - 26 90 - 54 90 - 54 90 - 53 90 - 55 20 - 70 20 - 71 40 - 40 90 - 39 80 - 1 120 - 99 80 - 15 80 - 17 130 - 3 130 - 29 80 - 1 150 - 27 120 - 101 80 - 7 130 - 7 130 - 34 130 - 33 130 - 31 130 - 33 40 - 27 30 - 17 140 - 15 120 - 143 70 - 87 120 - 142 60 - 26 130 - 35 70 - 33 70 - 35 150 - 21 60 - 25 20 - 83 70 - 79 90 - 55 90 - 54 70 - 81 70 - 82 70 - 93 50 - 63 50 - 64 50 - 60 150 - 23 70 - 54 30 - 16 70 - 53 40 - 35 120 - 138

GRID 3D12 4F25 2E14 1I24 1I25 1J1 3F10 4F11 4F2 4F8 4F4 4E20 1C7 2E6 4I11 2C2 1F17 4H25 4I4 2C14 2C15 1F21 1F23 3G12 4G2 4G10 5C8 3I13 4H20 4E2 2F6 1J7 4D8 4D10 1G22 4H19 4G12 1E25 2B19 1D12 1D14 1D13 1D15 4I15 4F10 4H23 1D16 3J2 4I5 3G23 3I8 3I8 4H11 3I13 1E13 2F6 4G8 4D22 2G4 2G6 2G8 2G10 2G3 2G5 2G7 2G9 2G4

HOUSING AND CAB AIR FILTER........................................

HOUSING AND LOADING AUGER......................................

HOUSING AND PARKING BRAKES (L.H.)..........................

HOUSING, ALTERNATOR, 72 AMP ....................................

HOUSING, ALTERNATOR, 72 AMP ....................................

HOUSING, ALTERNATOR, 90 AMP ....................................

HOUSING, BEARING ............................................................

HOUSING, CLEAN GRAIN ELEVATOR ..............................

HOUSING, CLEAN GRAIN LOWER AUGER ......................

HOUSING, CLEAN GRAIN LOWER AUGER ......................

HOUSING, CLEAN GRAIN LOWER ELEVATOR ................

HOUSING, CLEANING FAN ................................................

HOUSING, CRANKSHAFT OIL SEAL ..................................

HOUSING, DRIVE WHEEL ..................................................

HOUSING, ENGINE POWERSHAFT....................................

HOUSING, FINAL DRIVE......................................................

HOUSING, FUEL INJECTION PUMP ..................................

HOUSING, GRAIN TANK VERTICAL ..................................

HOUSING, HORIZONTAL UNLOADING ..............................

HOUSING, HYDROSTATIC DRIVE PUMP ..........................

HOUSING, HYDROSTATIC DRIVE PUMP ..........................

HOUSING, INJECTION PUMP GOVERNOR (TH 01) ........

HOUSING, INJECTION PUMP GOVERNOR (TH 05) ........

HOUSING, KNIFE DRIVE CASE ..........................................

HOUSING, LOADING AUGER..............................................

HOUSING, LOWER TAILINGS ............................................

HOUSING, MICRO SWITCH ................................................

HOUSING, PLATFORM CONVERSION ..............................

HOUSING, PUMP, GRAIN TANK ........................................

HOUSING, SHOE GRAIN SUPPLY AUGERS ....................

HOUSING, SPINDLE, REAR WHEELS ................................

HOUSING, STARTER DRIVE ..............................................

HOUSING, STRAW CHOPPER ............................................

HOUSING, STRAW CHOPPER ............................................

HOUSING, STRAW WALKER PLUGGING ..........................

HOUSING, SUMP, GRAIN TANK ........................................

HOUSING, TAILINGS ELEVATOR ......................................

HOUSING, THROTTLE LINKAGE CONTROL ....................

HOUSING, TRANSM. AND DIFFERENTIAL ........................

HOUSING, TURBOCHARGER (AIRESEARCH) ..................

HOUSING, TURBOCHARGER (AIRESEARCH) ..................

HOUSING, TURBOCHARGER CENTER..............................

HOUSING, TURBOCHARGER CENTER(AIRESEARCH)....

HOUSING,CYL.,PRIMARY CTR’SHAFT SHEAVES ............

HOUSING,UPPER,CLEAN GRAIN ELEVATOR ..................

HOUSING,VERTICAL AUGER LOWER GEAR CASE ........

HOUSINGS, TURBOCHARGER (SCHWITZER) ..................

HOUSINGS,FEEDER HOUSE UPPER SHAFT....................

HSG.HORIZONTAL UNLDG.AUGER DR.GEAR CASE ......

HUB, AUGER DRIVE, PLATFORM ......................................

HUB, DRIVE, FEEDER BEATER..........................................

HUB, FEEDER BEATER DRIVE ..........................................

HUB, GRAIN TANK FRONT CROSS AUGER ....................

HUB, PLATFORM CONVERSION ........................................

HUB, RADIATOR FAN DRIVE BELT TIGHTENER ............

HUB, REAR WHEELS ..........................................................

HUB, SHEAVE, LOWER TAILINGS AUGER ......................

HUB, STRAW SPREADER ..................................................

HYDRAULIC CONTROL VALVE SPOOLS, MAIN ..............

HYDRAULIC CONTROL VALVE SPOOLS, MAIN ..............

HYDRAULIC CONTROL VALVE SPOOLS, MAIN ..............

HYDRAULIC CONTROL VALVE SPOOLS, MAIN ..............

HYDRAULIC CONTROL VALVE SPRINGS, MAIN..............

HYDRAULIC CONTROL VALVE SPRINGS, MAIN..............

HYDRAULIC CONTROL VALVE SPRINGS, MAIN..............

HYDRAULIC CONTROL VALVE SPRINGS, MAIN..............

HYDRAULIC CONTROL, MAIN RELIEF VALVE ................

6622 COMBINE PC1746

PAGE 90 - 34 120 - 123 60 - 15 40 - 64 40 - 65 40 - 66 100 - 27 120 - 108 120 - 99 120 - 105 120 - 101 120 - 93 20 - 26 60 - 7 140 - 3 50 - 20 30 - 29 130 - 29 130 - 33 50 - 33 50 - 34 30 - 34 30 - 36 100 - 57 120 - 125 120 - 133 150 - 30 110 - 32 130 - 24 120 - 73 60 - 33 40 - 72 120 - 54 120 - 56 40 - 11 130 - 23 120 - 135 30 - 11 50 - 12 20 - 57 20 - 59 20 - 58 20 - 60 140 - 7 120 - 107 130 - 27 20 - 61 110 - 47 130 - 34 100 - 71 110 - 27 110 - 27 130 - 15 110 - 32 20 - 85 60 - 33 120 - 131 120 - 69 70 - 17 70 - 19 70 - 21 70 - 23 70 - 16 70 - 18 70 - 20 70 - 22 70 - 17

(16-OCT-86) PN=16

1A17 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2G8 4I16 2H20 2H21 2I18 2I19 2I18 2I17 2I16 2J8 2J9 2J10 2J2 2J4 2J5 2J13 2J12 2J14 2G18 2G17 2H20 2H21 2G20 2G22 2F15 2I10 2D3 2I21 2I23 2D5 2D2 2D15 2D15 2I12 2I20 2I12 2I6 2I8 2D8 2D10 2C20 2D11 2C6 2C8 2C6 2C17 2D19 2D20 2D19 2D20 2C22 2C23 2C10 2C10 2D16 2D16 2D16 2D15 2D15 2D15 2D15 2C11 2C12 2C18 2C14 2C11

PAGE HYDRAULIC CONTROL, MAIN RELIEF VALVE ................ 70 - 21 HYDRAULIC CYLINDER BARREL, PRIMARY COUNTERSHAFT SHEAVES (DUAL-RANGE)................ 140 - 8 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 59 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 60 HYDRAULIC DRIVE REEL HOSES, BAT REEL ................ 70 - 81 HYDRAULIC DRIVE REEL HOSES, PICKUP REEL .......... 70 - 82 HYDRAULIC DRIVE REEL LINES, BAT REEL.................... 70 - 81 HYDRAULIC DRIVE REEL OIL LINES ................................ 70 - 80 HYDRAULIC HOSES, DRIVE REEL .................................... 70 - 79 HYDRAULIC LIFT REEL MASTER CYLINDER .................. 70 - 98 HYDRAULIC LIFT REEL MASTER CYLINDER KIT ............ 70 - 99 HYDRAULIC LIFT REEL MASTER CYLINDER-RH ............ 70 - 100 HYDRAULIC LIFT REEL OIL LINES .................................... 70 - 91 HYDRAULIC LIFT REEL OIL LINES .................................... 70 - 93 HYDRAULIC LIFT REEL OIL LINES .................................... 70 - 94 HYDRAULIC LIFT REEL SLAVE CYLINDER KIT................ 70 - 103 HYDRAULIC LIFT REEL SLAVE CYLINDER-LEFT ............ 70 - 102 HYDRAULIC LIFT REEL SLAVE CYLINDER-LH ................ 70 - 104 HYDRAULIC MOTOR KIT .................................................... 70 - 31 HYDRAULIC MOTOR, DR. REEL ........................................ 70 - 30 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 59 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 60 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 33 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 35 HYDRAULIC OIL RESERVOIR ............................................ 70 - 3 HYDRAULIC PUMP,HYDROSTATIC DRIVE REEL ............ 70 - 73 HYDRO. DRIVE DISPLACEMENT CONTROL VALVE........ 50 - 46 HYDRO. DRIVE REEL FLOW CONTROL VALVE .............. 70 - 84 HYDRO. DRIVE REEL FLOW CONTROL VALVE .............. 70 - 86 HYDRO.DR.DISPLACEMENT CTL.VALVE GASKET .......... 50 - 48 HYDRO.DRIVE DISPLACEMENT CONTROL VALVE ........ 50 - 45 HYDRO.DRIVE OIL RESERVOIR MOUNTING STRAP ...... 50 - 59 HYDRO.DRIVE OIL RESERVOIR SIGHT GLASS .............. 50 - 59 HYDRO.DRIVE REEL HYDRAULIC PUMP KIT .................. 70 - 75 HYDRO.DRIVE REEL HYDRAULIC PUMP MOUNTING .... 70 - 83 HYDRO.DRIVE REEL HYDRAULIC SHEAVE KIT .............. 70 - 75 HYDRO.DRIVE REEL OIL LINES ON PLATFORM ............ 70 - 69 HYDRO.DRIVE REEL SPEED CTL.VALVE LINKAGE ........ 70 - 71 HYDROSTATIC CHARGE PUMP ........................................ 50 - 51 HYDROSTATIC CHARGE PUMP KIT .................................. 50 - 53 HYDROSTATIC DRIVE CENTER SECTION........................ 50 - 39 HYDROSTATIC DRIVE CHARGE PUMP MOUNTING........ 50 - 55 HYDROSTATIC DRIVE CONTROL CABLE ........................ 50 - 25 HYDROSTATIC DRIVE CONTROL CABLE MOUNTING .... 50 - 27 HYDROSTATIC DRIVE CONTROL LEVER ........................ 50 - 25 HYDROSTATIC DRIVE CYLINDER BLOCK KIT ................ 50 - 36 HYDROSTATIC DRIVE LOWER OIL HOSES .................... 50 - 63 HYDROSTATIC DRIVE LOWER OIL HOSES .................... 50 - 64 HYDROSTATIC DRIVE LOWER OIL LINES........................ 50 - 63 HYDROSTATIC DRIVE LOWER OIL LINES........................ 50 - 64 HYDROSTATIC DRIVE MOTOR .......................................... 50 - 41 HYDROSTATIC DRIVE MOTOR .......................................... 50 - 42 HYDROSTATIC DRIVE MOTOR COUPLER........................ 50 - 29 HYDROSTATIC DRIVE MOTOR MOUNTING...................... 50 - 29 HYDROSTATIC DRIVE OIL COOLER ................................ 50 - 60 HYDROSTATIC DRIVE OIL FITTINGS ................................ 50 - 60 HYDROSTATIC DRIVE OIL HOSES .................................... 50 - 60 HYDROSTATIC DRIVE OIL MOUNTING ............................ 50 - 59 HYDROSTATIC DRIVE OIL RESERVOIR............................ 50 - 59 HYDROSTATIC DRIVE OIL RESERVOIR FILTER.............. 50 - 59 HYDROSTATIC DRIVE OIL RESERVOIR STRAINER ........ 50 - 59 HYDROSTATIC DRIVE PUMP BEARING ............................ 50 - 30 HYDROSTATIC DRIVE PUMP BEARING ............................ 50 - 31 HYDROSTATIC DRIVE PUMP BEARINGS ........................ 50 - 37 HYDROSTATIC DRIVE PUMP CYLINDER BLOCKS .......... 50 - 33 HYDROSTATIC DRIVE PUMP FRONT COVER.................. 50 - 30

6622 COMBINE PC1746

(16-OCT-86)

GRID 2C12 2C14 2C15 2C17 2D6 2C11 2C12 2C19 2C14 2C15 2C18 2C18 2I10 2I10 2I14 2I14 2I14 2C17 2C9 2C9 2C9 2D23 2D23 2D22 2D22 2D17 5C22 5C22

HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC HYDROSTATIC

PAGE DRIVE PUMP FRONT COVER.................. 50 - 31 DRIVE PUMP HOUSING .......................... 50 - 33 DRIVE PUMP HOUSING .......................... 50 - 34 DRIVE PUMP HOUSING KIT .................... 50 - 36 DRIVE PUMP KIT ...................................... 50 - 49 DRIVE PUMP SEALS ................................ 50 - 30 DRIVE PUMP SEALS ................................ 50 - 31 DRIVE PUMP SERVO PISTON ASSY...... 50 - 38 DRIVE PUMP SHAFT ................................ 50 - 33 DRIVE PUMP SHAFT ................................ 50 - 34 DRIVE PUMP SWASHPLATE.................... 50 - 37 DRIVE PUMP TRUNNIONS ...................... 50 - 37 DRIVE REEL HYDRAULIC PUMP ............ 70 - 73 DRIVE REEL HYDRAULIC SHEAVE ........ 70 - 73 DRIVE REEL MOTOR SHIELD ................ 70 - 77 DRIVE REEL MOTOR SPROCKETS ........ 70 - 77 DRIVE REEL MOTOR SUPPORTS .......... 70 - 77 DRIVE SHAFT KIT .................................... 50 - 36 DRIVE SHEAVES ...................................... 50 - 28 DRIVE SUPPORTS .................................... 50 - 28 DRIVE UNIT................................................ 50 - 28 DRIVE UNIT LOWER SHIELD .................. 50 - 67 DRIVE UNIT LOWER SUPPORTS............ 50 - 67 DRIVE UNIT UPPER LATCH .................... 50 - 66 DRIVE UNIT UPPER SHIELD .................. 50 - 66 DRIVE UPPER OIL LINES ........................ 50 - 61 GROUND DRIVE BELTS .......................... 170 - 11 GROUND DRIVE SHEAVES .................... 170 - 11

I 3I18 3J6 4F21 4I23 3I20 4I21 4D19 3J9 3J10 4I25 3H3 4H17 4H17 5C19 5C20 3J8 3D11 1I1 1G4 1G7 1C6 1F21 1F23 2B22 4I2 1B18 3C22 1H21 1H23 1H19 5D23 3C22 3D7 3C12 1D10

IDLER SHAFT, FEEDER CONVEYOR ................................

IDLER SHAFT, FEEDER CONVEYOR ................................

IDLER, CLEAN GRAIN ELEVATOR ....................................

IDLER, DECLUTCHING ........................................................

IDLER, DRIVE, FEEDER CONVEYOR ................................

IDLER, DRIVE, SECONDARY COUNTERSHAFT ..............

IDLER, DRIVE, STRAW CHOPPER ....................................

IDLER, FEEDER CONVEYOR DRIVE ................................

IDLER, FEEDER CONVEYOR DRIVE ................................

IDLER, FEEDER HOUSE DRIVE ........................................

IDLER, KNIFE DRIVE ..........................................................

IDLER,SHEAVE,GR.TANK CROSS AUGER DRIVE............

IDLER,SPROCKET,GR.TANK CROSS AUGER DRIVE ......

IDLERS, FEEDER HOUSE DRIVE ......................................

IDLERS, FEEDER HOUSE DRIVE ......................................

IDLERS, FEEDER HOUSE MIDDLE BELT..........................

IMPELLER, PRESSURIZER BLOWER ................................

INDICATOR LIGHT ASSEMBLY, HI PRESSURE................

INJECTION NOZZLE, FUEL ................................................

INJECTION NOZZLE, FUEL ................................................

INJECTION PUMP GEAR COVER ......................................

INJECTION PUMP GOVERNOR HOUSING (TH 01) ..........

INJECTION PUMP GOVERNOR HOUSING (TH 05) ..........

INPUT SHAFT, TRANSMISSION..........................................

INSPECTION DOOR,HOR.UNLDG.AUG.SWIVEL ..............

INSTALLATION KIT, SHORT BLOCK (TH 01) ....................

INSTRUMENT PANEL ..........................................................

INSTRUMENT PANEL ACCESSORIES ..............................

INSTRUMENT PANEL GAUGES..........................................

INSTRUMENT PANEL WIRING HARNESS ........................

INSTRUMENT PANEL, CONSOLE COVER DECALS ........

INSULATION, CONSOLE ......................................................

INSULATION, INNER CAB ROOF........................................

INSULATION, SEAT CONSOLE ..........................................

INTAKE MANIFOLD ..............................................................

110 - 37 110 - 51 120 - 119 140 - 15 110 - 39 140 - 13 120 - 65 110 - 54 110 - 55 140 - 17 100 - 76 130 - 21 130 - 21 170 - 8 170 - 9 110 - 53 90 - 33 40 - 40 30 - 42 30 - 45 20 - 25 30 - 34 30 - 36 50 - 15 130 - 31 20 - 12 90 - 19 40 - 35 40 - 37 40 - 33 170 - 37 90 - 19 90 - 29 90 - 9 20 - 55

10-17 PN=17

1A18 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1C11 4B24

PAGE INTAKE VALVES .................................................................. 20 - 30 INTERMEDIATE SHAFT, CYLINDER DRIVE ...................... 120 - 17

J 3G23 3J5

JAW, AUGER DRIVE, PLATFORM ...................................... 100 - 71 JAW, SLIP CLUTCH, FEEDER HOUSE .............................. 110 - 50

K 2D8 1H21 2I22 1I8 1I20 1I14 3G20 2F25 2G1 2F17 2E10 3D21 3D23 5B21 5D25 1J15 1I8 2G15 1I16 2J11 2J9 2J13 2J15 2G18 2D10 2C17 2C17 2C17 5B10 5B12 5B14 5B19 5B20 2G3 2G5 2G6 2G7 2G9 2G10 2G11 2G12 2G13 2F21 2D6 3E3 2J1 1I22 1I23 1I18 2G1 3D14 2I23 2H8 2H10 2H12

10-18

KEY, HYDROSTATIC CHARGE PUMP................................

KEY, IGNITION......................................................................

KIT, ADJUSTING SCREW ....................................................

KIT, AM RADIO ....................................................................

KIT, AM-FM RADIO, PUSH BUTTON ..................................

KIT, AM-FM STEREOPHONIC RADIO ................................

KIT, AUGER DRIVE ..............................................................

KIT, BACK PLATE REPAIR ..................................................

KIT, BACK PLATE, MAIN HYD. PUMP................................

KIT, BACK PLATE, MAIN HYDRAULIC VALVE ..................

KIT, BRAKE SLAVE CYLINDER ..........................................

KIT, COMPRESSOR..............................................................

KIT, COMPRESSOR HARDWARE ......................................

KIT, CONTROL VALVE SOLENOID ....................................

KIT, DECAL ..........................................................................

KIT, ELECTRICAL CONNECTOR SERVICE........................

KIT, EXTERNAL ANTENNA ..................................................

KIT, FLOW CONTROL PLUG ..............................................

KIT, HARNESS ......................................................................

KIT, HYD.LIFT REEL MASTER CYLINDER-RH ..................

KIT, HYDRAULIC LIFT REEL MASTER CYLINDER ..........

KIT, HYDRAULIC LIFT REEL SLAVE CYLINDER ..............

KIT, HYDRAULIC LIFT REEL SLAVE CYLINDER ..............

KIT, HYDRAULIC MOTOR....................................................

KIT, HYDROSTATIC CHARGE PUMP ................................

KIT, HYDROSTATIC DRIVE CYLINDER BLOCK ................

KIT, HYDROSTATIC DRIVE PUMP HOUSING ..................

KIT, HYDROSTATIC DRIVE SHAFT ....................................

KIT, LEVELING CYLINDER ..................................................

KIT, LEVELING CYLINDER ..................................................

KIT, LEVELING CYLINDER ..................................................

KIT, LEVELING VALVE ........................................................

KIT, LEVELING VALVE SOLENOID ....................................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAIN HYDRAULIC CONTROL VALVE ........................

KIT, MAJOR SEAL REPAIR..................................................

KIT, MOTOR ..........................................................................

KIT, O-RING - AIR CONDITIONING ....................................

KIT, PLATFORM LIFT HYDRAULIC CYLINDER ................

KIT, RADIO ............................................................................

KIT, RADIO ANTENNA..........................................................

KIT, RADIO, AM ....................................................................

KIT, RELIEF VALVE, MAIN HYD. PUMP ............................

KIT, SEAL ..............................................................................

KIT, SEAL REPAIR ..............................................................

KIT, SECONDARY CONTROL VALVE ................................

KIT, SECONDARY CONTROL VALVE ................................

KIT, SECONDARY CONTROL VALVE ................................

50 - 51 40 - 35 70 - 85 40 - 47 40 - 59 40 - 53 100 - 67 70 - 13 70 - 14 70 - 5 60 - 11 90 - 44 90 - 47 150 - 17 170 - 39 40 - 80 40 - 47 70 - 28 40 - 55 70 - 101 70 - 99 70 - 103 70 - 105 70 - 31 50 - 53 50 - 36 50 - 36 50 - 36 150 - 5 150 - 7 150 - 9 150 - 15 150 - 16 70 - 16 70 - 18 70 - 19 70 - 20 70 - 22 70 - 23 70 - 24 70 - 25 70 - 26 70 - 9 50 - 49 90 - 52 70 - 89 40 - 61 40 - 63 40 - 57 70 - 14 90 - 36 70 - 86 70 - 47 70 - 49 70 - 51

GRID 1I8 1I16 2F2 2E18 2E22 2E20 1I10 3D15 1I12 1I8 1I14 1J13 2I3 1G16 2D6 2I21 2I12 2I12 2D6 2D8 2H2 2H18 2I2 2H24 3F14 3F14 3F16 3G25 3G21 3F9 3H2 3F8 3G12 3G25 3H3 3G25 3G25 3G25 3H2 3G25 5C16 3F4 3G9 4D16 3F3 3G8 3D6 4B22 1G8 1G9 4G24 2I8 1I22 1E25 2G24 3C16

KIT, SPEAKER, AM ..............................................................

KIT, SPEAKERS, RADIO, TAPE PLAYER ..........................

KIT, STEERING CYLINDER..................................................

KIT, STEERING PUMP ........................................................

KIT, STEERING PUMP INPUT SHAFT SEAL ....................

KIT, STEERING PUMP SEAL ..............................................

KIT, STEREOPHONIC RADIO..............................................

KIT, SUPER HEAT ................................................................

KIT, TAPE PLAYER ..............................................................

KIT, TAPE PLAYER, AM ......................................................

KIT, TAPE PLAYER, AM-FM STEREOPHONIC ..................

KIT, TERMINAL AND WIRING ............................................

KIT, UNLOADING AUGER SWING HYD. CYL. ..................

KIT, WIRING, L.H. SEPARATOR ........................................

KIT,DISPLACEMENT CONTROL VALVE ............................

KIT,HYDRO.DRIVE REEL FLOW CONTROL VALVE ........

KIT,HYDRO.DRIVE REEL HYDRAULIC PUMP ..................

KIT,HYDRO.DRIVE REEL HYDRAULIC SHEAVE ..............

KIT,HYDROSTATIC DRIVE PUMP ......................................

KIT,SEAL REPAIR,HYDROSTATIC CHARGE PUMP..........

KIT,SEAL REPAIR,SECONDARY CONTROL VALVE ........

KIT,SEAL REPR.,UNLOADING AUGER SWING HYD ........

KIT,UNLOADING AUGER SWING HYD. CYLINDER ..........

KIT,UNLOADING AUGER SWING HYD.CYLINDER............

KNIFE AND AUGER DRIVE SHAFT ....................................

KNIFE AND AUGER DRIVE SUPPORTS ............................

KNIFE AND AUGER DRIVE TUBE AND SUPPORTS ........

KNIFE DRIVE ........................................................................

KNIFE DRIVE AND AUGER DRIVE SHAFTS ....................

KNIFE DRIVE BELT TIGHTENER........................................

KNIFE DRIVE BRACKETS....................................................

KNIFE DRIVE CASE ............................................................

KNIFE DRIVE CASE ............................................................

KNIFE DRIVE CHAIN............................................................

KNIFE DRIVE IDLER AND TIGHTENER ............................

KNIFE DRIVE SHAFT ..........................................................

KNIFE DRIVE SHEAVE ........................................................

KNIFE DRIVE SHIELD ..........................................................

KNIFE DRIVE SHIELDS........................................................

KNIFE DRIVE SPROCKET ..................................................

KNIFE DRIVE SPROCKETS AND CHAINS ........................

KNIFE GUARDS, CUTTERBAR (NON-CLOG) ....................

KNIFE GUARDS, CUTTERBAR (NON-CLOG) ....................

KNIFE, STRAW CHOPPER ..................................................

KNIVES AND GUARDS ........................................................

KNIVES AND GUARDS ........................................................

KNOB, CAB ROOF................................................................

KNOB, CONCAVE ADJUSTING CONTROLS......................

KNOB, FUEL SHUT-OFF ......................................................

KNOB, FUEL SHUT-OFF CONTROL ..................................

KNOB, GRAIN TANK ............................................................

KNOB, HYDRO.DRIVE REEL SPEED CONTROL ..............

KNOB, RADIO ......................................................................

KNOB, THROTTLE LINKAGE CONTROL ............................

KNOB, VARIABLE CYLINDER CONTROL ..........................

KNOBS, SEAT ......................................................................

PAGE 40 - 47 40 - 55 60 - 28 60 - 19 60 - 23 60 - 21 40 - 49 90 - 37 40 - 51 40 - 47 40 - 53 40 - 78 70 - 66 40 - 3 50 - 49 70 - 84 70 - 75 70 - 75 50 - 49 50 - 51 70 - 41 70 - 57 70 - 65 70 - 63 100 - 31 100 - 31 100 - 33 100 - 73 100 - 69 100 - 26 100 - 75 100 - 25 100 - 57 100 - 73 100 - 76 100 - 73 100 - 73 100 - 73 100 - 75 100 - 73 170 - 5 100 - 21 100 - 53 120 - 62 100 - 20 100 - 52 90 - 28 120 - 15 30 - 46 30 - 47 130 - 3 70 - 71 40 - 61 30 - 11 70 - 37 90 - 13

L 3C6 3B15 4B19 3C8 4E13 3B20 3C1

LADDER, FRONT .................................................................. 90 - 3 LADDER, REAR .................................................................... 80 - 9 LAMP, CYLINDER SPEED TACHOMETER ........................ 120 - 11 LANDING, OPERATOR’S...................................................... 90 - 5 LATCH, CHAFFER FRAME .................................................. 120 - 85 LATCH, ENGINE COMPARTMENT REAR SHEET ............ 80 - 15 LATCH, ENGINE COMPARTMENT WALKWAY .................. 80 - 21 6622 COMBINE PC1746

(16-OCT-86) PN=18

1A19 6622 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 3B25 4G24 2D22 3B16 3H9 5B23 5B23 5B23 5B23 5B8 5B8 5B8 5B10 5B12 5B14 5B15 5B8 5C6 5B25 5C5 5C2 5C2 5C2 5B17 5B19 5B20 5C4 2B8 4F11 4H7 2C6 2E12 3C16 4G18 4G12 1E25 2G24 4F10 4F4 3H23 3H25 1G1 2I25 2J10 2J7 2J2 2J4 2J14 1C16 3F5 3G10 1I2 1G17 1H21 1I4 1H14 1E14 1C3 1C4 2G20 2G22 5B25 3D25 2E5 2E3 1E22 2I18

LATCH, FRONT ENGINE COMPARTMENT ........................

LATCH, GRAIN TANK ..........................................................

LATCH, HYDROSTATIC DRIVE UNIT UPPER....................

LATCH, SEPARATOR R.H. SHIELD ....................................

LEVELING CABLES AND MTG.,PLATFORM-RH ................

LEVELING CONTROL CHECK VALVE................................

LEVELING CONTROL PISTON ............................................

LEVELING CONTROL PISTON ROD ..................................

LEVELING CONTROL RESERVOIR AND LINE..................

LEVELING CYLINDER ..........................................................

LEVELING CYLINDER BARREL ..........................................

LEVELING CYLINDER BLEEDER VALVE ..........................

LEVELING CYLINDER KIT ..................................................

LEVELING CYLINDER KIT ..................................................

LEVELING CYLINDER KIT ..................................................

LEVELING CYLINDER MOUNTING ....................................

LEVELING CYLINDER PISTON ROD ..................................

LEVELING LIMIT SWITCH AND BRACKET ........................

LEVELING LINES AND HOSES ..........................................

LEVELING SWITCHES AND FUSE ....................................

LEVELING SYSTEM OIL LINE HOSES ..............................

LEVELING SYSTEM OIL LINES ..........................................

LEVELING SYSTEM OIL LINES FILTER ............................

LEVELING VALVE ................................................................

LEVELING VALVE KIT..........................................................

LEVELING VALVE SOLENOID ............................................

LEVELING WIRING HARNESS, FRONT AND REAR ........

LEVER ASSEMBLY, GEARSHIFT........................................

LEVER, CLEAN GRAIN ELEVATOR HOUSING..................

LEVER, CONTROL, UNLOADING AUGER..........................

LEVER, HYDROSTATIC DRIVE CONTROL ........................

LEVER, PARKING BRAKE ..................................................

LEVER, SEAT........................................................................

LEVER, SEPARATOR DRIVE CONTROLS ........................

LEVER, TAILINGS ELEVATOR HOUSING ..........................

LEVER, THROTTLE LINKAGE CONTROL ..........................

LEVER, VARIABLE CYLINDER CONTROL ........................

LEVER,CLEAN GRAIN ELEVATOR UPPER HOUSING ....

LEVER,CLEAN GRAIN LOWER ELEVATOR HOUSING ....

LEVER,REVERSER FEEDER HOUSE BOTTOM SHEET ..

LEVER,REVERSER FEEDER HOUSE BOTTOM SHEET ..

LEVERS, FUEL INJECTION PUMP GOVERNOR ..............

LIFT CYLINDER, PLATFORM ..............................................

LIFT REEL MASTER CYLINDER, HYDRAULIC-RH............

LIFT REEL OIL LINES ..........................................................

LIFT REEL OIL LINES, HYDRAULIC ..................................

LIFT REEL OIL LINES, HYDRAULIC ..................................

LIFT REEL SLAVE CYLINDER,HYDRAULIC-LH ................

LIFT STRAPS ........................................................................

LIFTING GUARDS ................................................................

LIFTING GUARDS ................................................................

LIGHT, DOME........................................................................

LIGHT, UNLOADING AUGER ..............................................

LIGHTER ELEMENT..............................................................

LIGHTS, FIELD......................................................................

LIGHTS, WIRING HARNESS, L.H. ......................................

LINE, ENGINE OIL PRESSURE GAUGE ............................

LINERS, CYLINDER ..............................................................

LINERS, CYLINDER ..............................................................

LINES AND HOSES, HYDRAULIC OIL................................

LINES AND HOSES, HYDRAULIC OIL................................

LINES AND HOSES, LEVELING ..........................................

LINES, AIR CONDITIONER ..................................................

LINES, BRAKE, LEFT-HAND................................................

LINES, BRAKE, RIGHT-HAND ............................................

LINES, FUEL ........................................................................

LINES, HYDRAULIC DRIVE REEL, BAT REEL ..................

6622 COMBINE PC1746

(16-OCT-86)

PAGE 80 - 20 130 - 3 50 - 66 80 - 10 110 - 3 150 - 19 150 - 19 150 - 19 150 - 19 150 - 3 150 - 3 150 - 3 150 - 5 150 - 7 150 - 9 150 - 11 150 - 3 150 - 28 150 - 21 150 - 27 150 - 23 150 - 23 150 - 23 150 - 13 150 - 15 150 - 16 150 - 25 50 - 1 120 - 108 130 - 11 50 - 25 60 - 13 90 - 13 120 - 141 120 - 135 30 - 11 70 - 37 120 - 107 120 - 101 110 - 17 110 - 19 30 - 38 70 - 88 70 - 100 70 - 97 70 - 91 70 - 93 70 - 104 20 - 35 100 - 22 100 - 55 40 - 41 40 - 5 40 - 35 40 - 43 40 - 27 20 - 86 20 - 22 20 - 23 70 - 33 70 - 35 150 - 21 90 - 49 60 - 5 60 - 3 30 - 7 70 - 81

GRID 2J2 2J4 2D19 2D20 5C2 2I17 2D17 2J7 2I24 2E25 2H14 4C10 2E1 4E24 3I25 1F2 2I8 4F25 4G2 5D9 5D7 5D9 4G6 4G4 5D9 4C10 1G24 1H19 1H2 1H2 4F8 4G8 4G14 4G10 3G8 3F22 4G20 4G19 4I6 3G20 1B10 1B9

LINES, HYDRAULIC LIFT REEL OIL ..................................

LINES, HYDRAULIC LIFT REEL OIL ..................................

LINES, HYDROSTATIC DRIVE LOWER OIL ......................

LINES, HYDROSTATIC DRIVE LOWER OIL LINES ..........

LINES, LEVELING SYSTEM OIL..........................................

LINES, OIL, HYDRAULIC DRIVE REEL ..............................

LINES, OIL, HYDROSTATIC DRIVE UPPER ......................

LINES, OIL, LIFT REEL ........................................................

LINES, OIL, PLATFORM LIFT ..............................................

LINES, STEERING LOWER OIL (REAR) ............................

LINES,OIL,UNLOADING AUGER SWING HYD. ..................

LINK, DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM ..................................................................................

LINKAGE AND PEDALS, BRAKE ........................................

LINKAGE, CLEANING FAN SPEED CONTROL..................

LINKAGE, REVERSER CONTROL ......................................

LINKAGE, THROTTLE ..........................................................

LINKAGE,HYDRO.DRIVE REEL SPEED CTL.VALVE ........

LOADING AUGER AND HOUSING......................................

LOADING AUGER AND HOUSING......................................

LOADING AUGER BELTS ....................................................

LOADING AUGER DR. SHEAVES AND BELTS ................

LOADING AUGER DRIVE ....................................................

LOADING AUGER DRIVE TIGHTENER ..............................

LOADING AUGER GEAR CASE ..........................................

LOADING AUGER SHEAVES ..............................................

LOCKOUT ARM, DUAL-RANGE CYLINDER DRIVE ..........

LOW SHAFT SPEED MONITOR’S HARNESS ....................

LOW SHAFT SPEED MONITORING CONTROL BOX........

LOW SHAFT SPEED MONITORS........................................

LOW SHAFT SPEED MOUNTING BRACKETS ..................

LOWER AUGER, CLEAN GRAIN ........................................

LOWER TAILINGS AUGER ..................................................

LOWER TAILINGS AUGER DRIVE TIGHTENER................

LOWER TAILINGS HOUSING ..............................................

LUB FITTING, KNIVES AND GUARDS................................

LUB FITTING, PICKUP REEL DR. ......................................

LUBE BANK SYSTEM, L.H. SIDE........................................

LUBE BANK SYSTEM, R.H. SIDE ......................................

LUBE BANK, UNLOADING AUGER ....................................

LUBE FITTING, AUGER DRIVE ..........................................

LUBRICANT, CYLINDER LINER PACKING ........................

LUBRICANT, ENGINE VALVE STEM ..................................

PAGE 70 - 91 70 - 93 50 - 63 50 - 64 150 - 23 70 - 80 50 - 61 70 - 97 70 - 87 60 - 26 70 - 53 120 - 27 60 - 1 120 - 97 110 - 45 30 - 13 70 - 71 120 - 123 120 - 125 170 - 23 170 - 21 170 - 23 120 - 129 120 - 127 170 - 23 120 - 27 40 - 13 40 - 33 40 - 15 40 - 15 120 - 105 120 - 131 120 - 137 120 - 133 100 - 52 100 - 41 120 - 143 120 - 142 130 - 35 100 - 67 20 - 3 20 - 2

M 1J12 1J12 1C2 1J8 2G1 2G1 2G4 2G6 2G8 2G10 2G3 2G5 2G6 2G7 2G9 2G10 2G3 2G5 2G6 2G7

MAGNETIC PICK-UP ............................................................

MAGNETIC PICK-UP HARNESS..........................................

MAIN BEARINGS ..................................................................

MAIN FRAME, STARTER ....................................................

MAIN HYD. PUMP BACK PLATE KIT..................................

MAIN HYD. PUMP RELIEF VALVE KIT ..............................

MAIN HYDRAULIC CONTROL RELIEF VALVE ..................

MAIN HYDRAULIC CONTROL RELIEF VALVE ..................

MAIN HYDRAULIC CONTROL RELIEF VALVE ..................

MAIN HYDRAULIC CONTROL RELIEF VALVE ..................

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE HOUSING ..............

MAIN HYDRAULIC CONTROL VALVE KIT ........................

MAIN HYDRAULIC CONTROL VALVE KIT ........................

MAIN HYDRAULIC CONTROL VALVE KIT ........................

MAIN HYDRAULIC CONTROL VALVE KIT ........................

40 - 77 40 - 77 20 - 21 40 - 73 70 - 14 70 - 14 70 - 17 70 - 19 70 - 21 70 - 23 70 - 16 70 - 18 70 - 19 70 - 20 70 - 22 70 - 23 70 - 16 70 - 18 70 - 19 70 - 20

10-19 PN=19