Page 1

Catalog Addendum to L820 printed January, 2011

Durable, corrosion-resistant anD economical choice that satisfies ul 1738 requirements. fasnseal速 444 & fasnseal速 W2 444 single-wall and double-wall special gas vent systems. ul 1738 and ulc s636.


UL 1738 and ULC S636 LiSted. Same FeatUreS and BeneFitS aS FaSnSeaL at an eConomiCaL priCe

®

FasNSeal 444 1

“a venting system shall be made of corrosion resistant materials…” (ul 1738 section 5.3)

“stainless steel…and other vent gas conduit shall comply with the requirements for the applicable tests…” (ul 1738 section 5.4)

Both AL29-4C and 444 have passed the UL 1738 Corrosion tests. Codes and Standards only require a vent system that has been listed to UL 1738. No specific material requirement. UL1738 does not state that material must be AL29-4C. 444 has a higher useful temperature limit (more applications). 444 has the equivalent corrosion resistance as AL29-4C, but at less cost.

DuraVent | www.duravent.com


UL 1738 and ULC S636 Systems

Specifications

fasnseal

applications fasnseal and fasnseal flex is for use with natural gas or propane Categories II, III and IV appliances or Canada’s Type BH Gas Vent Systems, having a maximum rated operating temperature of 480°F and a maximum positive pressure of 6” water column. FasNSeal can be used on a wide range of applications, including: high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters, or tankless water heaters.

All FasNSeal single- and double-wall vent lengths and components feature patented built-in mechanical locking band and triplelipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. This construction feature allows for ease of installation. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensures a leak-free product that is meant to last.

fasnseal W2 is ideal for use on commercial applications such as: office buildings, medical facilities, condos, or multiple unit apartment complexes where there is the need for low clearances to combustibles. In residential applications, FasNSeal W2 is the perfect solution for running between floor joists or in walls. materials and construction fasnseal 3”–7”: 444 super-ferritic stainless steel .016” 8”–12”: 444 super-ferritic stainless steel .019” 14”–24”: 444 super-ferritic stainless steel .024” fasnseal W2 3”–6”: 444 super-ferritic stainless steel .016” inner wall, 304 or 430 .016” outer wall. 7”: 444 super-ferritic stainless steel .016” inner wall, 304 or 430 .024” outer wall. 8”–12”: 444 super-ferritic stainless steel .019” inner wall, 304 or 430 .024” outer wall. 14”–24”: 444 super-ferritic stainless steel .024” inner wall, 304 or 430 .024” outer wall. Diameters fasnseal (single- and double-wall) 3”-24” listings fasnseal (single- and double-wall) UL Listed to UL 1738 and ULC S636. 800-835-4429 | DuraVent

2


FasNSeal 444 | Special Gas Vent

fasnseal® 444 - single-Wall Vent Length

Use to vent category II, III and IV appliances. SIZE 3” 3” 3”

A

B

3” 3” 3” 4” 4” 4” 4” 4” 4” 5” 5” 5” 5” 5” 6” 6” 6” 6” 6” 7” 7” 7” 7” 7” 8” 8” 8” 8” 8” 9” 9” 9” 9” 9” 10” 10”

3

DuraVent | www.duravent.com

ORDER # STOCK #

FSVL603-4S FSVL1203-4S FSVL1803-4S FSVL2403-4S FSVL3603-4S FSVL6003-4S FSVL604-4S FSVL1204-4S FSVL1804-4S FSVL2404-4S FSVL3604-4S FSVL6004-4S FSVL605-4S FSVL1205-4S FSVL1805-4S FSVL2405-4S FSVL3605-4S FSVL606-4S FSVL1206-4S FSVL1806-4S FSVL2406-4S FSVL3606-4S FSVL607-4S FSVL1207-4S FSVL1807-4S FSVL2407-4S FSVL3607-4S FSVL608-4S FSVL1208-4S FSVL1808-4S FSVL2408-4S FSVL3608-4S FSVL609-4S FSVL1209-4S FSVL1809-4S FSVL2409-4S FSVL3609-4S FSVL610-4S FSVL1210-4S

300001-4S 300015-4S 300045-4S 300060-4S 300075-4S 300090-4S 300002-4S 300016-4S 300046-4S 300061-4S 300076-4S 300091-4S 300003-4S 300017-4S 300047-4S 300062-4S 300077-4S 300004-4S 300018-4S 300048-4S 300063-4S 300078-4S 300005-4S 300019-4S 300049-4S 300064-4S 300079-4S 300006-4S 300020-4S 300050-4S 300065-4S 300080-4S 300007-4S 300021-4S 300051-4S 300066-4S 300081-4S 300008-4S 300022-4S

A

B

SIZE

ORDER # STOCK #

4” 10” 16” 22” 34” 58” 4” 10” 16” 22” 34” 58” 4” 10” 16” 22” 34” 4” 10” 16" 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10”

6” 12” 18” 24” 36” 60” 6” 12” 18” 24” 36” 60” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12”

10” FSVL1810-4S 300052-4S

A

16” 10” FSVL2410-4S 300067-4S 22” 10” FSVL3610-4S 300082-4S 34” 12” FSVL612-4S 300009-4S 4” 12” FSVL1212-4S 300023-4S 10” 12” FSVL1812-4S 300053-4S 16” 12” FSVL2412-4S 300068-4S 22” 12” FSVL3612-4S 300083-4S 34” 14” FSVL614-4S 300010-4S 4” 14” FSVL1214-4S 300024-4S 10” 14” FSVL1814-4S 300054-4S 16” 14” FSVL2414-4S 300069-4S 22” 14” FSVL3614-4S 300084-4S 34” 16” FSVL616-4S 300011-4S 4” 16” FSVL1216-4S 300025-4S 10” 16” FSVL1816-4S 300055-4S 16” 16” FSVL2416-4S 300070-4S 22” 16” FSVL3616-4S 300085-4S 34” 18” FSVL618-4S 303905-4S 4” 18” FSVL1218-4S 303909-4S 10” 18” FSVL1818-4S 303913-4S 16” 18” FSVL2418-4S 303917-4S 22” 18” FSVL3618-4S 303921-4S 34” 20” FSVL620-4S 303906-4S 4” 20” FSVL1220-4S 303910-4S 10” 20” FSVL1820-4S 303914-4S 16” 20” FSVL2420-4S 303918-4S 22” 20” FSVL3620-4S 303922-4S 34” 22” FSVL622-4S 303907-4S 4” 22” FSVL1222-4S 303911-4S 10” 22” FSVL1822-4S 303915-4S 16” 22” FSVL2422-4S 303919-4S 22” 22” FSVL3622-4S 303923-4S 34” 24” FSVL624-4S 303908-4S 4” 24” FSVL1224-4S 303912-4S 10” 24” FSVL1824-4S 303916-4S 16” 24” FSVL2424-4S 303920-4S 22” 24” FSVL3624-4S 303924-4S 34”

B

18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36”


Special Gas Vent | FasNSeal 444

Adjustable Vent Length

Use to add length to straight length of FasNSeal pipe. Adds 2”–14” of length. Requires at least 2” overlap for a secure connection. available in custom lengths.

2”-14” 18”

SIZE ORDER # STOCK #

SIZE ORDER # STOCK #

3”

FSAVL3-4S 300250-4S

12” FSAVL12-4S 300258-4S

4”

FSAVL4-4S 300251-4S

14” FSAVL14-4S 300259-4S

5”

FSAVL5-4S 300252-4S

16” FSAVL16-4S 300260-4S

6”

FSAVL6-4S 300253-4S

18” FSAVL18-4S 303937-4S

7”

FSAVL7-4S 300254-4S

20” FSAVL20-4S 303938-4S

8”

FSAVL8-4S 300255-4S

22” FSAVL22-4S 303939-4S

9"

FSAVL9-4S 300256-4S

24” FSAVL24-4S 303940-4S

10" FSAVL10-4S 300257-4S

2° Adjustable Vent Length

Use to facilitate for the 2° pitched required in horizontal runs. available in custom lengths. SIZE

18”

2”-12”

90° Elbow

ORDER #

STOCK #

3"

FSAVL03-2-4S 303128-4S

4"

FSAVL04-2-4S 303129-4S

5"

FSAVL05-2-4S 303130-4S

6"

FSAVL06-2-4S 303143-4S

7"

FSAVL07-2-4S 303144-4S

8"

FSAVL08-2-4S 303145-4S

9"

FSAVL09-2-4S 303146-4S

10"

FSAVL10-2-4S 303147-4S

12"

FSAVL12-2-4S 303148-4S

14"

FSAVL14-2-4S 303149-4S

16"

FSAVL16-2-4S 303150-4S

Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. SIZE

A

B

ORDER #

STOCK #

A

B

SIZE

3”

FSELB9003-4S 300160-4S

4”

6”

12” FSELB9012-4S 300168-4S 8 1⁄2” 10 1⁄4”

4”

FSELB9004-4S 300161-4S 4 1⁄2” 6 1⁄4”

5”

FSELB9005-4S 300162-4S

5”

6 3⁄4”

ORDER #

STOCK #

A

B

14” FSELB9014-4S 300169-4S 9 1⁄2” 11 3⁄8” 16” FSELB9016-4S 300170-4S

11” 12 1⁄2”

6”

FSELB9006-4S 300163-4S 5 1⁄2” 7 1⁄2”

18” FSELB9018-4S 303929-4S 11 1⁄2” 13 1⁄8”

7”

FSELB9007-4S 300164-4S 6 1⁄8” 7 7⁄8”

20” FSELB9020-4S 303930-4S 12 1⁄2” 14 1⁄2”

8”

FSELB9008-4S 300165-4S 6 1⁄2” 8 1⁄4”

22” FSELB9022-4S 303931-4S 13 3⁄8” 15”

9"

FSELB9009-4S 300166-4S

24” FSELB9024-4S 303932-4S 14 1⁄2” 16 1⁄8”

7”

9”

10" FSELB9010-4S 300167-4S 7 1⁄2” 9 3⁄8”

800-835-4429 | DuraVent

4


FasNSeal 444 | Special Gas Vent

88° Elbow

Use to transition from a vertical to a horizontal run. Stabilizes a 2° pitch towards the condensate drain for good condensate management. SIZE A

B

45° Elbow

ORDER #

STOCK #

A

B

SIZE

3”

FSELB8803-4S 303890-4S

4”

6”

9"

4”

FSELB8804-4S 303891-4S 4 1⁄2” 6 1⁄4”

10" FSELB8810-4S 303897-4S 7 1⁄2” 9 3⁄8”

5”

FSELB8805-4S 303892-4S

6 3⁄4”

12” FSELB8812-4S 303898-4S 8 1⁄2” 10 1⁄4”

6”

FSELB8806-4S 303893-4S 5 1⁄2” 7 1⁄2”

14” FSELB8814-4S 303899-4S 9 1⁄2” 11 3⁄8”

7”

FSELB8807-4S 303894-4S 6 1⁄8” 7 7⁄8”

16” FSELB8816-4S 303900-4S

8”

FSELB8808-4S 303895-4S 6 1⁄2” 8 1⁄4”

5”

A

B

ORDER #

STOCK #

A

A

B

FSELB8809-4S 303896-4S

7”

9”

11” 12 1⁄2”

30° Elbow

B

SIZE

3”

12”

ORDER #

STOCK #

A

B

3”

FSELB4503-4S 300130-4S 5 3⁄8”

4”

FSELB4504-4S 300131-4S 5 5⁄8” 3 1⁄8”

14”

FSELB4514-4S 300139-4S 9 1⁄4” 4 5⁄8”

5”

FSELB4505-4S 300132-4S

3 1⁄4”

16”

FSELB4516-4S 300140-4S 10”

4 7⁄8”

6”

FSELB4506-4S 300133-4S 6 3⁄8” 3 3⁄8”

18”

FSELB4518-4S 303925-4S 10 1⁄8”

5”

7”

FSELB4507-4S 300134-4S 6 3⁄4” 3 1⁄2”

20” FSELB4520-4S 303926-4S 10 7⁄8” 5 1⁄4”

8”

FSELB4508-4S 300135-4S 7 1⁄8” 3 5⁄8”

22” FSELB4522-4S 303927-4S 11 5⁄8” 5 5⁄8”

9"

FSELB4509-4S 300136-4S 7 1⁄2” 3 7⁄8”

24” FSELB4524-4S 303928-4S 12 3⁄8” 5 7⁄8”

6”

10" FSELB4510-4S 300137-4S 7 7⁄8”

FSELB4512-4S 300138-4S 8 1⁄2” 4 1⁄4”

4”

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE

A

B

DuraVent | www.duravent.com

STOCK #

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE

5

ORDER #

ORDER #

STOCK #

A

B

SIZE

ORDER #

STOCK #

A

B

FSELB3009-4S 300656-4S

7”

2 1⁄2”

3”

FSELB3003-4S 300650-4S 4 7⁄8” 1 7⁄8”

9"

4”

FSELB3004-4S 300651-4S 5 1⁄8” 1 7⁄8”

10" FSELB3010-4S 300657-4S 6 1⁄2” 2 1⁄4”

5”

FSELB3005-4S 300652-4S 5 1⁄4”

2”

12” FSELB3012-4S 300658-4S

6”

FSELB3006-4S 300653-4S 5 1⁄2”

2”

14” FSELB3014-4S 300659-4S 7 1⁄2” 2 1⁄2”

7”

FSELB3007-4S 300654-4S 5 7⁄8”

2”

16” FSELB3016-4S 300660-4S 8 1⁄8” 2 3⁄4”

8”

FSELB3008-4S 300655-4S 6 1⁄8” 2 1⁄8”

7”

2 1⁄2”


Special Gas Vent | FasNSeal 444

15° Elbow

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE

A

B

Wide Mouth Boot Tee

ORDER #

STOCK #

A

B

SIZE

ORDER #

STOCK #

A

B

3”

FSELB1503-4S 300239-4S 4 3⁄8” 7⁄8”

9"

FSELB1509-4S 300245-4S 5 1⁄4”

1”

4”

FSELB1504-4S 300240-4S 4 1⁄2”

1”

10" FSELB1510-4S 300246-4S 5 1⁄4”

1”

5”

FSELB1505-4S 300241-4S 4 5⁄8” 7⁄8”

12” FSELB1512-4S 300247-4S 5 1⁄2”

1”

6”

FSELB1506-4S 300242-4S 4 3⁄4” 7⁄8”

14” FSELB1514-4S 300248-4S 5 3⁄4”

1”

7”

FSELB1507-4S 300243-4S 4 7⁄8”

1”

16” FSELB1516-4S 300249-4S 6 1⁄8”

1”

8”

FSELB1508-4S 300244-4S 5 1⁄8”

1”

Use to transition from horizontal to vertical. Provides improved flue gas flow with angled gradual transitions. Can also be used as a manifold connection to gang boilers into a common vent. SIZE ORDER #

A C B

Standard Tee

A

B

C

SIZE ORDER #

A

B

C

4"

FSWBT4-4S 15 3⁄4"

7"

6 9⁄10"

12" FSWBT12-4S 23 3⁄4”

11"

10 9⁄10”

5"

FSWBT5-4S 16 3⁄4”

7 1⁄2"

7 3⁄10”

14" FSWBT14-4S 25 3⁄4”

12"

11 9⁄10”

6"

FSWBT6-4S 17 3⁄4”

8"

7 9⁄10”

16" FSWBT16-4S 27 3⁄4”

13"

12 9⁄10”

7"

FSWBT7-4S 18 3⁄4”

8 1⁄2”

8 3⁄10”

18" FSWBT18-4S 29 3⁄4”

14"

13 9⁄10”

8"

FSWBT8-4S 19 3⁄4”

9"

8 9⁄10”

20" FSWBT20-4S 31 3⁄4”

15"

14 9⁄10”

9"

FSWBT9-4S 20 3⁄4”

9 1⁄2”

9 3⁄10”

22" FSWBT22-4S 33 3⁄4”

16"

15 9⁄10”

10" FSWBT10-4S 21 3⁄4”

10"

9 9⁄10”

24" FSWBT24-4S 35 3⁄4”

17"

16 9⁄10”

Use for a 90° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. C A

B

SIZE ORDER # STOCK #

A

B

C

SIZE ORDER # STOCK #

3" 4 1⁄2” 12”

A

B

C

FST12-4S 300183-4S 16”

7”

9”

3”

FST3-4S

300175-4S 7”

4”

FST4-4S

300176-4S 8” 3 1⁄2” 5”

14”

FST14-4S 300184-4S 20” 8 1⁄2” 11”

5”

FST5-4S

300177-4S 10” 4”

6”

16”

FST16-4S 300185-4S 22” 9 1⁄2” 12”

6”

FST6-4S

300178-4S 10” 4 1⁄2” 6”

18”

FST18-4S 303933-4S 22 7⁄8” 11” 12 1⁄2”

7”

FST7-4S

300179-4S 12” 5”

7”

20”

FST20-4S 303934-4S 24 7⁄8” 12” 13 1⁄2”

8”

FST8-4S

300180-4S 14” 5 1⁄2” 8”

22”

FST22-4S 303935-4S 26 7⁄8” 13” 14 1⁄2”

9"

FST9-4S

300181-4S 14” 6”

24”

FST24-4S 303936-4S 28 7⁄8” 14” 15 1⁄2”

10"

FST10-4S 300182-4S 14” 6 1⁄2” 8”

8”

800-835-4429 | DuraVent

6


FasNSeal 444 | Special Gas Vent

Branch Tee

Use as a Tee increaser or as a manifold connection to gang boilers into a common vent. Available in custom size combinations. SIZE C

A

ORDER # STOCK #

A

B

C

4” x 4” x 3” FST04B03-4S 303004-4S 8 1⁄10” 3 1⁄2”

5”

5” x 5” x 3” FST05B03-4S 303014-4S 8 1⁄10” 4”

5 3⁄5”

6” x 6” x 5” FST06B05-4S 300199-4S 10 1⁄5” 4 1⁄2” 5 3⁄4” B

Boot Tee

Use to transition from horizontal to vertical with improved flue gas flow. SIZE

A

B

Tee Cap

ORDER # STOCK #

A

SIZE

ORDER # STOCK #

A

B

4”

FSBT4-4S 301029-4S 11 1⁄2” 7 1⁄2”

9”

FSBT9-4S 301034-4S 16 1⁄2”

5”

FSBT5-4S 301030-4S 12 1⁄2”

10”

FSBT10-4S 301035-4S 17 1⁄2” 10 1⁄2”

6”

FSBT6-4S 301031-4S 13 1⁄2” 8 1⁄2”

12”

FSBT12-4S 301036-4S 19 1⁄2” 11 1⁄2”

7"

FSBT7-4S 301032-4S 14 1⁄2”

14"

FSBT14-4S 301037-4S 21 1⁄2” 12 1⁄2”

8”

FSBT8-4S 301033-4S 15 1⁄2” 9 1⁄2”

16"

FSBT16-4S 301038-4S 23 1⁄2” 13 1⁄2”

8” 9”

10”

Use to cap Standard Tee, Branch Tee or Boot Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate. SIZE ORDER # STOCK # 3”

Severe Weather Rain Cap

A

DuraVent | www.duravent.com

SIZE ORDER # STOCK #

3”

FSTC3-4S 300205-4S

12”

FSTC12-4S 300213-4S

4”

FSTC4-4S 300206-4S

14”

FSTC14-4S 300214-4S

5”

FSTC5-4S 300207-4S

16”

FSTC16-4S 300215-4S

6”

FSTC6-4S 300208-4S

18”

FSTC18-4S 303941-4S

7”

FSTC7-4S 300209-4S

20”

FSTC20-4S 303942-4S

8”

FSTC8-4S 300210-4S

22”

FSTC22-4S 303943-4S

9"

FSTC9-4S

24”

FSTC24-4S 303944-4S

10"

FSTC10-4S 300212-4S

300211-4S

Use where high winds and horizontal rain are present. For vertical termination only. SIZE

B

7

B

4”

ORDER #

STOCK #

A

B

FSSWRC04-4S 303964-4S

6”

7 1⁄10”


Special Gas Vent | FasNSeal 444

Termination Cone

Use for vertical termination. Creates static back pressure to adjust harmonics. Venturi effect increases velocity of flue gases. Reduced opening provides for a smaller cross section to deter rain from entering the system. Available in custom size combinations. B

A C

SIZE

ORDER #

STOCK #

A

B

C

5” x 4”

FSCN0504-4S

303776-4S

6 2⁄5”

4”

5”

12” x 10”

FSCN1210-4S

300868-4S

6 2⁄5”

10”

12”

14” x 12”

6 2⁄5”

12”

14”

FSCN1412-4S

300662-4S

16” x 14”

FSCN1614-4S

300623-4S

6 2⁄5”

14”

16”

18” x 16”

FSCN1816-4S

300748-4S

6 2⁄5”

16”

18”

20” x 18”

FSCN2018-4S

303551-4S

6 2⁄5”

18”

20”

22” x 20”

FSCN2220-4S

303552-4S

6 2⁄5”

20”

22”

24” x 22”

FSCN2422-4S

303553-4S

6 2⁄5”

22”

24”

800-835-4429 | DuraVent

8


FasNSeal 444 | Special Gas Vent

fasnseal W2® 444 - Double-Wall Vent Length

Used for venting special gas burning Categories II, III and IV appliances. To calculate O.D. add 1” to vent diameter. SIZE

B

9

DuraVent | www.duravent.com

A

ORDER # STOCK #

W2-603-4S 3” W2-1203-4S 3” W2-1803-4S 3” W2-2403-4S 3” W2-3603-4S 4” W2-604-4S 4” W2-1204-4S 4” W2-1804-4S 4” W2-2404-4S 4” W2-3604-4S 5” W2-605-4S 5” W2-1205-4S 5” W2-1805-4S 5” W2-2405-4S 5” W2-3605-4S 6” W2-606-4S 6” W2-1206-4S 6” W2-1806-4S 6” W2-2406-4S 6” W2-3606-4S 7” W2-607-4S 7” W2-1207-4S 7” W2-1807-4S 7” W2-2407-4S 7” W2-3607-4S 8” W2-608-4S 8” W2-1208-4S 8” W2-1808-4S 8” W2-2408-4S 8” W2-3608-4S 9” W2-609-4S 9” W2-1209-4S 9” W2-1809-4S 9” W2-2409-4S 9” W2-3609-4S 10” W2-610-4S 10” W2-1210-4S 10” W2-1810-4S 3”

100001-4S 100015-4S 100045-4S 100060-4S 100075-4S 100002-4S 100016-4S 100046-4S 100061-4S 100076-4S 100003-4S 100017-4S 100047-4S 100062-4S 100077-4S 100004-4S 100018-4S 100048-4S 100063-4S 100078-4S 100005-4S 100019-4S 100049-4S 100064-4S 100079-4S 100006-4S 100020-4S 100050-4S 100065-4S 100080-4S 100007-4S 100021-4S 100051-4S 100066-4S 100081-4S 100008-4S 100022-4S 100052-4S

A

B

SIZE

ORDER # STOCK #

A

B

4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 3” 4” 10” 16" 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16”

6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18”

10”

W2-2410-4S W2-3610-4S W2-612-4S W2-1212-4S W2-1812-4S W2-2412-4S W2-3612-4S W2-614-4S W2-1214-4S W2-1814-4S W2-2414-4S W2-3614-4S W2-616-4S W2-1216-4S W2-1816-4S W2-2416-4S W2-3616-4S W2-618-4S W2-1218-4S W2-1818-4S W2-2418-4S W2-3618-4S W2-620-4S W2-1220-4S W2-1820-4S W2-2420-4S W2-3620-4S W2-622-4S W2-1222-4S W2-1822-4S W2-2422-4S W2-3622-4S W2-624-4S W2-1224-4S W2-1824-4S W2-2424-4S W2-3624-4S

22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34” 4” 10” 16” 22” 34”

24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36” 6” 12” 18” 24” 36”

10” 12” 12” 12” 12” 12” 14” 14” 14” 14” 14” 16” 16” 16” 16” 16” 18” 18” 18” 18” 18” 20” 20” 20” 20” 20” 22” 22” 22” 22” 22” 24” 24” 24” 24” 24”

100067-4S 100082-4S 100009-4S 100023-4S 100053-4S 100068-4S 100083-4S 100010-4S 100024-4S 100054-4S 100069-4S 100084-4S 100011-4S 100025-4S 100055-4S 100070-4S 100085-4S 103905-4S 103909-4S 103913-4S 103917-4S 103921-4S 103906-4S 103910-4S 103914-4S 103918-4S 103922-4S 103907-4S 103911-4S 103915-4S 103919-4S 103923-4S 103908-4S 103912-4S 103916-4S 103920-4S 103924-4S


Special Gas Vent | FasNSeal 444

Adjustable Vent Length

Use to add variable length to your straight length of FasNSeal pipe. Adds 2”–14” of length. Requires at least 4” overlap for a secure connection. SIZE

B

A

ORDER #

STOCK #

A

SIZE

ORDER #

STOCK #

A

B

3”

W2-AVL3-4S 100250-4S 2”-14” 18”

12” W2-AVL12-4S 100258-4S 2”-14”

18”

4”

W2-AVL4-4S 100251-4S 2”-14” 18”

14” W2-AVL14-4S 100259-4S 2”-14”

18”

5”

W2-AVL5-4S 100252-4S 2”-14” 18”

16” W2-AVL16-4S 100260-4S 2”-14”

18”

6”

W2-AVL6-4S 100253-4S 2”-14” 18”

18” W2-AVL18-4S 103937-4S 2”-14”

18”

7”

W2-AVL7-4S 100254-4S 2”-14” 18”

20” W2-AVL20-4S 103938-4S 2”-14”

18”

8”

W2-AVL8-4S 100255-4S 2”-14” 18”

22” W2-AVL22-4S 103939-4S 2”-14”

18”

9"

W2-AVL9-4S 100256-4S 2”-14” 18”

24” W2-AVL24-4S 103940-4S 2”-14”

18”

10" W2-AVL10-4S 100257-4S 2”-14”

90° Elbow

B

18”

Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. SIZE ORDER # STOCK # A

B

A

SIZE ORDER # STOCK #

A

B

3”

W2-9003-4S 100160-4S 3 9⁄10” 5 9⁄10”

12” W2-9012-4S 100168-4S 8 2⁄5” 10 2⁄5”

4”

W2-9004-4S 100161-4S 4 2⁄5” 6 2⁄5”

14” W2-9014-4S 100169-4S 9 2⁄5” 11 2⁄5”

5”

W2-9005-4S 100162-4S 4 9⁄10” 6 9⁄10”

16” W2-9016-4S 100170-4S 10 1⁄10” 12 2⁄5”

6”

W2-9006-4S 100163-4S 5 2⁄5” 7 2⁄5”

18” W2-9018-4S 103929-4S 11 5⁄12” 13 4⁄11”

7”

W2-9007-4S 100164-4S 5 9⁄10” 7 9⁄10”

20” W2-9020-4S 103930-4S 12 5⁄12” 14 4⁄11”

8”

W2-9008-4S 100165-4S 6 2⁄5” 8 2⁄5”

22” W2-9022-4S 103931-4S 13 5⁄12” 15 4⁄11”

9"

W2-9009-4S 100166-4S 6 9⁄10” 8 9⁄10”

24” W2-9024-4S 103932-4S 14 5⁄12” 16 4⁄11”

10" W2-9010-4S 100167-4S 7 2⁄5”

88° Elbow

B

9 2⁄5”

Use to transition from a vertical to a horizontal run. Facilitates a 2° pitch towards the condensate drain for good condensate management. SIZE ORDER # STOCK # A

B

A

B

SIZE ORDER # STOCK #

A

B

3”

W2-8803-4S 103890-4S 3 9⁄10” 5 9⁄10”

12” W2-8812-4S 103898-4S 8 2⁄5” 10 2⁄5”

4”

W2-8804-4S 103891-4S 4 2⁄5” 6 2⁄5”

14” W2-8814-4S 103899-4S 9 2⁄5” 11 2⁄5”

5”

W2-8805-4S 103892-4S 4 9⁄10” 6 9⁄10”

16” W2-8816-4S 103900-4S 10 1⁄10” 12 2⁄5”

6”

W2-8806-4S 103893-4S 5 2⁄5” 7 2⁄5”

18” W2-8818-4S 103901-4S 11 5⁄12” 13 4⁄11”

7”

W2-8807-4S 103894-4S 5 9⁄10” 7 9⁄10”

20” W2-8820-4S 103902-4S 12 5⁄12” 14 4⁄11”

8”

W2-8808-4S 103895-4S 6 2⁄5” 8 2⁄5”

22” W2-8822-4S 103903-4S 13 5⁄12” 15 4⁄11”

9"

W2-8809-4S 103896-4S 6 9⁄10” 8 9⁄10”

24” W2-8824-4S 103904-4S 14 5⁄12” 16 4⁄11”

10" W2-8810-4S 103897-4S 7 2⁄5”

9 2⁄5”

800-835-4429 | DuraVent 10


FasNSeal 444 | Special Gas Vent

45° Elbow

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE ORDER # STOCK # A

B

A

A

B

3”

12” W2-4512-4S 100138-4S 8 2⁄5” 4 3⁄10”

W2-4503-4S 100130-4S 5 1⁄5”

4”

W2-4504-4S 100131-4S 5 3⁄5” 3 1⁄10”

14” W2-4514-4S 100139-4S 9 1⁄10” 4 7⁄10”

5”

W2-4505-4S 100132-4S

3 1⁄5”

16” W2-4516-4S 100140-4S 9 4⁄5” 4 9⁄10”

6”

W2-4506-4S 100133-4S 6 3⁄10” 3 2⁄5”

18” W2-4518-4S 103925-4S 11 5⁄12” 7 7⁄10”

7”

6”

W2-4507-4S 100134-4S 6 7⁄10” 3 1⁄2”

20” W2-4520-4S 103926-4S

12

8 1⁄5”

8”

W2-4508-4S 100135-4S

3 7⁄10”

22” W2-4522-4S 103927-4S

13

8 7⁄10”

9"

W2-4509-4S 100136-4S 7 2⁄5” 3 4⁄5”

24” W2-4524-4S 103928-4S

14”

9 1⁄5”

7”

4”

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE ORDER # STOCK # A

B

15° Elbow

A

B

SIZE ORDER # STOCK #

A

B

3”

W2-3003-4S 100650-4S 4 9⁄10” 1 4⁄5”

9"

4”

W2-3004-4S 100651-4S 5 1⁄5” 1 9⁄10”

10" W2-3010-4S 100657-4S 6 7⁄10” 2 3⁄10”

5”

W2-3005-4S 100652-4S 5 2⁄5”

2”

12” W2-3012-4S 100658-4S 7 1⁄5”

2”

14” W2-3014-4S 100659-4S 7 7⁄10” 2 3⁄5”

6”

W2-3006-4S 100653-4S 5 7⁄10”

7”

W2-3007-4S 100654-4S 5 9⁄10” 2 1⁄10”

8”

W2-3008-4S 100655-4S 6 1⁄10” 2 1⁄5”

W2-3009-4S 100656-4S 6 2⁄5” 2 1⁄5” 2 2⁄5”

16” W2-3016-4S 100660-4S 8 1⁄5” 2 7⁄10”

Offsets obstructions as needed. Allows for better condensate management and less back pressure. SIZE ORDER # STOCK # A

B

11 DuraVent | www.duravent.com

SIZE ORDER # STOCK #

3”

10" W2-4510-4S 100137-4S 7 7⁄10”

30° Elbow

B

A

B

SIZE ORDER # STOCK #

A

B

3”

W2-1503-4S 100239-4S 4 9⁄10” 1 4⁄5”

9"

W2-1509-4S

100245

6 2⁄5” 2 1⁄5”

4”

W2-1504-4S 100240-4S 5 1⁄5” 1 9⁄10”

10" W2-1510-4S

100246

6 7⁄10” 2 3⁄10”

5”

W2-1505-4S 100241-4S 5 2⁄5”

2”

12”

W2-1512-4S

100247

7 1⁄5” 2 2⁄5”

6”

W2-1506-4S 100242-4S 5 7⁄10”

2”

14” W2-1514-4S

100248

7 7⁄10” 2 3⁄5”

16” W2-1516-4S

100249

8 1⁄5” 2 7⁄10”

7”

W2-1507-4S 100243-4S 5 9⁄10” 2 1⁄10”

8”

W2-1508-4S 100244-4S 6 1⁄10” 2 1⁄5”


Special Gas Vent | FasNSeal 444

Standard Tee

Use for a 90° offset, to combine connections from two or more appliances into a common vent or as a condensate management point when used in conjunction with drain fitting. All Standard Tees have completely welded inner walls. B

A

C

SIZE ORDER # STOCK #

A

B

C

SIZE ORDER # STOCK #

A

B

C

7”

3”

W2-T3-4S 100175-4S 7 3⁄10” 4 1⁄2” 3”

12” W2-T12-4S 100183-4S 16 3⁄10” 9”

4”

W2-T4-4S 100176-4S 8 3⁄10” 4 4⁄5” 3 1⁄2”

14” W2-T14-4S 100184-4S 20 3⁄10” 11” 8 1⁄2”

5”

W2-T5-4S 100177-4S 9 3⁄10” 5 3⁄10” 4”

16” W2-T16-4S 100185-4S 22 3⁄10” 12” 9 1⁄2”

6”

W2-T6-4S 100178-4S 10 3⁄10” 5 4⁄5” 4 1⁄2”

18” W2-T18-4S 103933-4S 22 7⁄8” 12 1⁄2” 11”

7”

W2-T7-4S 100179-4S 11 3⁄10” 6 3⁄10” 5”

20” W2-T20-4S 103934-4S 24 7⁄8” 13 1⁄2” 12”

8”

W2-T8-4S 100180-4S 12 3⁄10” 6 4⁄5” 5 1⁄2”

22” W2-T22-4S 103935-4S 26 7⁄8” 14 1⁄2” 13”

9"

W2-T9-4S 100181-4S 13 3⁄10” 7 3⁄10” 6”

24” W2-T24-4S 103936-4S 28 7⁄8” 15 1⁄2” 14”

10" W2-T10-4S 100182-4S 14 3⁄10” 7 4⁄5” 6 1⁄2”

Wide Mouth Boot Tee

Use to transition from horizontal to vertical with improved flue gas flow with angled gradual transitions. Can also be used as a manifold connection to gang boilers into a common vent. Completely welded inner walls. SIZE

A C B

Tee Cap

ORDER #

A

B

C

SIZE

ORDER #

A

B

C

10 9⁄10"

4”

W2-WBT4-4S 15 3⁄4”

7”

6 9⁄10”

12” W2-WBT12-4S 23 3⁄4"

11"

5”

W2-WBT5-4S 16 3⁄4”

7 1⁄2”

7 4⁄10”

14” W2-WBT14-4S 25 3⁄4"

12"

11 9⁄10"

6”

W2-WBT6-4S 17 3⁄4”

8”

7 9⁄10”

16” W2-WBT16-4S 27 3⁄4"

13"

12 9⁄10"

7”

W2-WBT7-4S 18 3⁄4”

8 1⁄2”

8 4⁄10”

18” W2-WBT18-4S 29 3⁄4"

14"

13 9⁄10"

8”

W2-WBT8-4S 19 3⁄4”

9”

8 9⁄10”

20” W2-WBT20-4S 31 3⁄4"

15"

14 9⁄10"

9"

W2-WBT9-4S 20 3⁄4”

9 1⁄2”

9 4⁄10”

22” W2-WBT22-4S 33 3⁄4"

16"

15 9⁄10"

10" W2-WBT10-4S 21 3⁄4”

10”

9 9⁄10”

24” W2-WBT24-4S 35 3⁄4"

17"

16 9⁄10"

Use to cap Standard Tee, Branch Tee or Boot Tee. Remove Tee Cap to inspect the system; clean out debris. SIZE ORDER # STOCK # A

A

SIZE ORDER # STOCK #

A

3”

W2-TC3-4S 100205-4S

3 1⁄2”

12”

W2-TC12-4S 100213-4S

3 1⁄2”

4”

W2-TC4-4S 100206-4S

3 1⁄2”

14” W2-TC14-4S 100214-4S

3 1⁄2”

5”

W2-TC5-4S 100207-4S

3 1⁄2”

16”

W2-TC16-4S 100215-4S

3 1⁄2”

6”

W2-TC6-4S 100208-4S

3 1⁄2”

18” W2-TC18-4S 103941-4S

3 1⁄2”

7”

W2-TC7-4S 100209-4S

3 1⁄2”

20” W2-TC20-4S 103942-4S

3 1⁄2”

8”

W2-TC8-4S 100210-4S

3 1⁄2”

22” W2-TC22-4S 103943-4S

3 1⁄2”

9"

W2-TC9-4S 100211-4S

3 1⁄2”

24” W2-TC24-4S 103944-4S

3 1⁄2”

10" W2-TC10-4S 100212-4S

3 1⁄2”

800-835-4429 | DuraVent 12


FasNSeal 444 | Special Gas Vent

Rain Cap

Use where pipe terminates above the roof line. When terminating larger than 12” vent diameter use a Termination Cone. SIZE

ORDER # STOCK #

A

3”

W2-RC3-4S 100325-4S

A

4”

W2-RC4-4S 100326-4S

C

5”

B

Termination Cone B

B

C

3 1⁄2”

6 4⁄5”

1”

4 1⁄2”

8 9⁄10”

1”

W2-RC5-4S 100327-4S

5 4⁄5”

11 3⁄10”

1”

6”

W2-RC6-4S 100328-4S

6 4⁄5”

13 1⁄2”

1”

7"

W2-RC7-4S 100329-4S

7 4⁄5”

15 4⁄5”

1”

8”

W2-RC8-4S 100330-4S

8 4⁄5”

18”

1”

9”

W2-RC9-4S 100331-4S

10”

20 3⁄10”

1”

10”

W2-RC10-4S 100332-4S

11”

22 1⁄2”

1”

12”

W2-RC12-4S 100333-4S

13”

27”

1”

Use for vertical termination. Creates static back pressure to adjust harmonics. Venturi effect increases velocity of flue gases. Reduced opening provides for a smaller cross section to deter rain from entering the system. Available in custom size combinations.

A

SIZE C

13 DuraVent | www.duravent.com

STOCK #

A

B

C

W2-CN0806-4S 100618-4S

8”

6”

6 2⁄5”

14” x 12” W2-CN1412-4S 100622-4S

14”

12”

6 2⁄5”

8” x 6”

ORDER #


Warranty ®

M&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products to the original purchaser, with the exception of Ventinox (lifetime), DuraBlack (five years) and all Termination Caps (five years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from substantial defects in material or manufacturing, if properly installed, maintained and used. This Warranty is non-transferable with the exception of Ventinox which is transferable from the original homeowner to the buyer of the home for a period of ten (10) years. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) purchased other than from an authorized DuraVent dealer, retailer or distributor; (2) modified or altered; (3) improperly serviced, inspected or cleaned; or (4) subject to negligence or any use not in accordance with the printed materials provided with the product as determined by DuraVent. This limited lifetime warranty applies only to parts manufactured by DuraVent. DuraVent provides the following warranties for its products: One Hundred Percent (100%) of the purchase price or MSRP at time of purchase, whichever is lower, for 15 years from the date of purchase, and Fifty Percent (50%) thereafter, except for the following limitations: Ventinox liner and components in wood, oil, wood pellet, and gas installations are warranted at One Hundred Percent (100%) for the lifetime of the original homeowner; Ventinox 316 liner and components for coal burning installations which are warranted One Hundred Percent (100%) for ten years; all Termination Caps and DuraBlack® are warranted at One Hundred Percent (100%) for five years, and at Ten Percent (10%) thereafter. All warranty obligations of DuraVent shall be limited to repair or replacement of the defective product pursuant to the terms and conditions applicable to each product line. These remedies shall constitute DuraVent’s sole obligation and sole remedy under this limited warranty. This warranty provides no cash surrender value. The terms and conditions of this limited lifetime warranty may not be modified, altered or waived by any action, inaction or representation, whether oral or in writing, except upon the express, written authority of an executive officer of DuraVent. Ventinox WARRANTY CONDITIONS Liner and Component warranties contained herein are subject to the following conditions: (1) The Liner and Components must be installed according to DV’s installation instructions; (2) The Liner and Components are used only to line or reline chimneys venting residential appliances for which the liner was intended; and (3) documented annual inspection of the Liner and Components and maintenance as deemed necessary, beginning one year after the date of installation and continuing throughout the warranty period, by a Nationally Certified Chimney Sweep or VENTINOX® installer. The Liner and Components warranty is further subject to compliance with the following requirements throughout the warranty period: The chimney must have a chimney cap and chemical chimney cleaners must not be used when cleaning the Liner or Components. Plastic-bristle flue cleaning brushes are recommended. Corn, biofuels, driftwood or other wood containing salt, preservative-treated lumber, plastic and household trash or garbage, or wood pellets containing such materials must not be burned in the appliance or fireplace. In case of a chimney fire, the chimney must be inspected and approved by a certified Chimney Sweep before reuse. After each annual inspection, maintenance, and cleaning, the certified Chimney Sweep must fill out and date the appropriate section of the warranty card provided with the chimney liner. LIMITATIONS ON INTERNET SALES: Notwithstanding any other terms or conditions of this limited lifetime warranty, DuraVent provides no warranty for the following specific products if such products are both: (a) purchased from an Internet seller; and (b) not installed by a qualified professional installer: DuraTech®, DuraPlus HTC®, PelletVent Pro®, FasnSeal®, and DuraVent’s relining products including DuraLiner®, DuraFlex® 304, DuraFlex® 316, DuraFlex® Pro, DuraFlex® SW, and Ventinox®. For purposes of this warranty, a trained professional installer is defined as one of the following: licensed contractors with prior chimney installation experience, CSIA Certified Chimney Sweeps, NFI Certified Specialists, or WETT Certified Professionals. DuraVent reserves the right to inspect defective product to determine if it qualifies for replacement under the terms of this limited lifetime warranty. All warranty claims must be submitted with proof of purchase. Labor and installation costs are not covered under this warranty. To obtain warranty service contact DuraVent promptly at DuraVent Warranty Service, 902 Aldridge Rd., Vacaville CA 95688, or call 800-835-4429. WHERE LAWFUL, DuraVent DISCLAIMS ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL DuraVent BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED TO PROPERTY DAMAGE AND PERSONAL INJURY. DuraVent’S ENTIRE LIABILITY IS LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. For the most up-to-date installation instructions, see www. duravent.com REV 10.20.2010 M&G DuraVent, Inc. PO Box 1510 Vacaville, CA 95696-1510 Manufactured in Vacaville, CA and Albany, NY.

800-835-4429 | DuraVent 14


Catalog Addendum to L820 printed January, 2011

Made in the USA. 800-835-4429 www.duravent.com L444 1/2011

DuraVent Chimney  

Durable, corrosion-resistant anD economical choice ... - M&G DuraVent

Read more
Read more
Similar to
Popular now
Just for you