Page 1

SMART MOTION C A T A L O G 2009:1


Which arm do you need? To ensure that the balancing arm you order meets your expectations it is important to consider the following aspects.

1. Which type?

PARALLEL ARM

RAIL SUPPORTED ARM

!

Stationary.

!

Rails permit unlimited reach.

!

Vertical working motion, such as threading.

!

!

Can be mounted on table, wall or pillar.

Can be used over several work stations, or several arms can share rails at one work station.

!

Can be mounted between pillars fixed to ceiling, wall or floor.

DO YOU NEED ERROR PROOFING?

FOLDING ARM !

Stationary.

!

Large effective working area in horizontal plane–several different working operations on same unit at varying distances.

!

Can be mounted on table, wall or pillar.

You can upgrade Folding arms and most Rail arms with Smart-Control. Smart-Control upgrade adds three encoders to specific torque arms, at the pivot locations, and a control system. The controller converts the data from the encoders to an X, Y & Z location and controls the screwdrivers based on the program you generated.


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

2. Which tool holder?

3. What load capacity? To decide the correct load capacity for a balancing arm you need to take the following into account: Weight of cables, hoses, etc. to tool/machine Weight of tool/machine Weight of any extension tube

The design of the tool and type of operation determine the choice of tool holder. Tool holders are available that are fixed, or can tilt and rotate to permit horizontal or vertical operations..

+

Weight of tool holder

=

Total weight to use when choosing load capacity

Choose the correct size of tool holder by measuring the diameter of the selection of the tool or machine that will be held in the tool holder. If necessary, the tool holder can be combined with one of our specially made adapter sleeves. NOTE! When the shaft of a power screwdriver is parallel with the rotating axis of the tool holder, the torque will not be eliminated.

WHAT IS SMART-CONTROL? Smart-Control upgrade adds positional tracking to your torque arm. The Smart-Control knows the X, Y & Z location of your tool and synchronizes the location with the tool control system. Smart-Control Features: !

Program 5 jobs with 40 screw locations each.

!

Add a bit/socket tray to confirm the correct applicator is used.

!

Add Smart-Bins to confirm the correct screw is used. Look for the Smart upgrade symbol to know if the arm you are considering is suitable for this option.

Although the greatest care has been taken to ensure the accuracy of information in this catalog, we accept no liability for any errors. We reserve the right to make changes without prior notice. I L L U S T R A T I O N S The illustrations in this catalog represent the products described, but the supplied goods may differ in certain respects from those illustrated. S P E C I F I C A T I O N S To avoid holding back improvement in design, materials and manufacturing methods, we reserve the right to revise designs and dimensions in relation to the information given in this catalog.

Customers are reminded that when buying products from Kolver USA for use in professional or other applications, additional up-to-date information and advice is available that is outside the scope of this catalog concerning the suitability of each product for use with various combinations of Kolver USA’s extensive product range. All relevant information must be passed on to the individuals who are responsible for using the product.

3


4

S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Parallel arm (PA1) PA1 is the most powerful parallel arm and is capable of supporting a weight of up to 22.0 lbs and a torque of up to 619.5 in/lbs. It is intended for vertical operations and is especially suitable for fitting screws and for large threading operations. The weight of the tool is supported by gas springs. The longer pillar is recommended as installed on the floor when working in a seated position.

Article Number

Load Capacity

Torque

Max reach

Min reach

Height

PA1-0400-0102

2.2–4.4 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in

PA1-0400-0203

4.4–6.6 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in 21.7 in

PA1-0400-0304

6.6–8.8 lbs

619.5 in/lbs

36.2 in

24.8 in

PA1-0400-0405

8.8–11.0 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in

PA1-0400-0506

11.0–13.2 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in

PA1-0400-0608

13.2–17.6 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in

PA1-0400-0810

17.6–22.0 lbs

619.5 in/lbs

36.2 in

24.8 in

21.7 in

PA1-0500-0102

2.2–4.4 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in

PA1-0500-0203

4.4–6.6 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in

PA1-0500-0305

6.6–11.0 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in

PA1-0500-0506

11.0–13.2 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in

PA1-0500-0608

13.2 17.6 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in

PA1-0500-0810

17.6–22.0 lbs

619.5 in/lbs

43.3 in

28.7 in

25.6 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Parallel arm (PA1)

TABLE STAND !

TST-0125

Torque ≤ 442.5 in/lbs

WALL BRACKET !

WBR-P1-1

Torque ≤ 442.5 in/lbs

WALL BRACKET !

WBR-P1-2

Torque ≤ 619.5 in/lbs

ADJUSTABLE VERTICAL HOLDER !

ATH-4050-1 Ø = 1.6–1.96 in

!

BST-080X080X0800 h = 31.5 in

!

ATH-5060-1 Ø = 1.96–2.3 in

!

BST-080X080X1300 h = 51.2 in

Weight .88 lbs Torque ≤ 442.5 in/lbs

PILLAR

FIXED VERTICAL HOLDER !

*

VTH-PF-057-1

Weight 1.5 lbs Torque ≤ 619.5 in/lbs

FIXED VERTICAL HOLDER swiveling tool !

*

VTH-PS-057-1

Weight 3.3 lbs Torque ≤ 619.5 in/lbs

*

See price list for a selection of Adapter Sleeves

5


6

S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Parallel arm (PA2) The PA2 parallel arm is intended for vertical operations and is used primarily with threading machines and power screwdrivers. The longer pillar is recommended as installed on the floor when working in a seated position.

Article Number

Load Capacity

Torque

Max reach

Min reach

Height

PA2-0300-0002

0–4.4 lbs

177.0 in/lbs

25.2 in

17.3 in

13.8 in

PA2-0300-02025

4.4–5.5 lbs

177.0 in/lbs

25.2 in

17.3 in

13.8 in

PA2-0400-0002

0–4.4 lbs

177.0 in/lbs

30.7 in

20.5 in

16.9 in

PA2-0400-02025

4.4–5.5 lbs

177.0 in/lbs

30.7 in

20.5 in

16.9 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Parallel arm (PA2)

TABLE STAND !

TST-0100 h = 11.8 in

TABLE CLAMP

!

TST-0148 h = 18.5 in

!

PILLAR

!

WBR-P2

ADJUSTABLE VERTICAL HOLDER

!

BST-080X040X0800 h = 31.5 in

!

!

BST-080X040X1300 h = 51.2 in

Weight .44 lbs

FIXED VERTICAL HOLDER !

VTH-0036-2 Ø = 1.4 in

!

VTH-0038-2 Ø = 1.5 in

!

VTH-0046-2 Ø = 1.8 in

!

VTH-0056-2 Ø = 2.2 in

Weight .44 lbs

VERTICAL HOLDER, adjustable in two axis * !

STH-0036-2 Ø = 1.4 in

!

STH-0038-2 Ø = 1.5 in

!

STH-0046-2 Ø = 1.8 in

!

STH-0056-2 Ø = 2.2 in

Weight .44 lbs

*

WALL BRACKET

TCL-2282

See price list for a selection of Adapter Sleeves

ATH-2540-2 Ø = 0.98–1.6 in

!

ATH-4050-2 Ø = 1.6–1.96 in

7


8

S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Folding arm (PS1) PS1 is the most powerful folding arm. It is capable of supporting a weight of up to 22.0 lbs and a torque of up to 619.5 in/lbs. Folding arms have a large effective working area and are suitable for both vertical and horizontal operations. The weight of the tool is supported by gas springs. The longer pillar is recommended as installed on the floor when working in a seated position.

Article Number

Load Capacity

Torque

Max reach

Min reach

PS1-1000-0102

2.2–4.4 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1000-0204

4.4–8.8 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1000-0405

8.8–11.0 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1000-0506

11.0–13.2 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1000-0608

13.2–17.6 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1000-0810

17.6–22.0 lbs

619.5 in/lbs

38.8 in

11.6 in

PS1-1200-0102

2.2–4.4 lbs

619.5 in/lbs

45.7 in

15.7 in

PS1-1200-0204

4.4–8.8 lbs

619.5 in/lbs

45.7 in

15.7 in

PS1-1200-0405

8.8–11.0 lbs

619.5 in/lbs

45.7 in

15.7 in

PS1-1200-0506

11.0–13.2 lbs

619.5 in/lbs

45.7 in

15.7 in

PS1-1200-0608

13.2–17.6 lbs

619.5 in/lbs

45.7 in

15.7 in

PS1-1200-0810

17.6–22.0 lbs

619.5 in/lbs

45.7 in

15.7 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Folding arm (PS1)

TABLE STAND !

WALL BRACKET

TST-0125

!

Torque ≤ 442.5 in/lbs

WBR-P1-1

Torque ≤ 442.5 in/lbs

ADJUSTABLE VERTICAL HOLDER !

ATH-4050-1 Ø = 1.6–1.96 in

!

Torque ≤ 619.5 in/lbs

!

BST-080X080X0800 h = 31.5 in

!

BST-080X080X1300 h = 51.2 in

FIXED VERTICAL HOLDER !

ATH-5060-1 Ø = 1.96–2.4 in

!

VTH-PF-057-1

Weight 1.54 lbs Torque ≤ 619.5 in/lbs

FIXED VERTICAL HOLDER, swiveling tool *

ADJUSTABLE HORIZONTAL HOLDER

VTH-PS-057-1

!

ROTARY HORIZONTAL HOLDER, fixed tool

HTH-4050-1 Ø = 1.6–1.96 in

!

HTH-5060-1 Ø = 1.96–2.4 in

Weight 2.65 lbs Torque ≤ 442.5 in/lbs

Weight 3.75 lbs Torque ≤ 619.5 in/lbs

!

PILLAR

WBR-P1-2

Weight .88 lbs Torque ≤ 442.5 in/lbs

!

*

HTH-PF-057-1

Weight 3.53 lbs Torque ≤ 619.5 in/lbs

*

WALL BRACKET

See price list for a selection of Adapter Sleeves

ROTARY HORIZONTAL HOLDER, swiveling tool * !

HTH-PS-057-1

Weight 5.3 lbs Torque ≤ 619.5 in/lbs

9


10 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Folding arm (PS2) The PS2 folding arm has a large effective working area and a wide selection of tool holders for both vertical and horizontal operations. Common tools and machines that are used with PS2 include pop rivet guns, portioning tools, power screwdrivers, adhesive guns and nail guns. The longer pillar is recommended as installed on the floor when working in a seated position.

Article Number

Load Capacity

Torque

Max reach

Min reach

PS2-0750-0001

0–2.2 lbs

177.0 in/lbs

27.9 in

4.3 in

PS2-0750-01025

2.2–5.5 lbs

177.0 in/lbs

27.9 in

4.3 in

PS2-0900-0001

0–2.2 lbs

177.0 in/lbs

33.1 in

7.9 in

PS2-0900-01025

2.2–5.5 lbs

177.0 in/lbs

33.1 in

7.9 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Folding arm (PS2)

TABLE STAND

PILLAR

!

TST-0100 h = 11.8 in

TABLE CLAMP

!

TST-0148 h = 18.5 in

!

WALL BRACKET

TCL-2282

!

WBR-P2

!

BST-080X040X0800 h = 31.5 in

!

BST-080X040X1300 h = 51.2 in

FIXED VERTICAL HOLDER ADJUSTABLE VERTICAL HOLDER !

ATH-2540-2 Ø = 0.98–1.96 in

!

ATH-5060-1 Ø = 1.6–1.96 in

!

VTH-0036-2 Ø = 1.4 in

!

VTH-0038-2 Ø = 1.5 in

!

VTH-0046-2 Ø = 1.8 in

!

VTH-0056-2 Ø = 2.2 in

Weight 1.54 lbs Torque ≤ 619.5 in/lbs

Weight .44 lbs

VERTICAL HOLDER, adjustable in two axis *

HORIZONTAL HOLDER, rotary and adjustable *

!

STH-0036-2 Ø = 1.4 in

!

STH-0038-2 Ø = 1.5 in

!

CST-0036-2 Ø = 1.4 in

!

CST-0038-2 Ø = 1.5 in

!

STH-0046-2 Ø = 1.8 in

!

STH-0056-2 Ø = 2.2 in

!

CST-0046-2 Ø = 1.8 in

!

CST-0056-2 Ø = 2.2 in

Weight .66 lbs

Weight .88 lbs

ROTARY HORIZONTAL HOLDER * !

HTH-0036-2 Ø = 1.4 in

!

HTH-0038-2 Ø = 1.5 in

Weight .88 lbs

*

See price list for a selection of Adapter Sleeves

!

HTH-0046-2 Ø = 1.8 in

!

HTH-0056-2 Ø = 2.2 in

11


12 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Folding arm (PS3) The PS3 folding arm is used exclusively for fine mechanical work. Machines and tools that are often used with this folding arm include soldering irons and small power screwdrivers. Tool mountings are available for both vertical and horizontal operations. A wall bracket, height stop and extension tube are standard equipment with this arm. The longer pillar is recommended as installed on the floor when working in a seated position.

Article Number

Load Capacity

Torque

Max reach

Min reach

PS3-0750-00005

0–1.1 lbs

30.98 in/lbs

26.4 in

5.3 in

PS3-0750-00501

1.1–2.2 lbs

30.98 in/lbs

26.4 in

5.3 in

PS3-0900-00005

0–1.1 lbs

30.98 in/lbs

31.7 in

9.1 in

PS3-0900-00501

1.1–2.2 lbs

30.98 in/lbs

31.7 in

9.1 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Folding arm (PS3)

PILLAR

WALL BRACKET

!

BST-040X040X0800 h = 31.5 in

TABLE CLAMP

!

BST-040X040X1300 h = 51.2 in

!

TCL-2282

EXPANSION TUBE !

HEIGHT STOP

WBR-P3

!

Included.

TAR-P3

Included.

ADJUSTABLE VERTICAL HOLDER

TEX-P3

!

Weight .31 lbs

ATH-2540-3 Ø = 0.98–1.6 in

!

ATH-4050-3 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER

VERTICAL HOLDER, adjustable in two axis *

!

VTH-0036-3 Ø = 1.4 in

!

VTH-0038-3 Ø = 1.5 in

!

STH-0036-3 Ø = 1.4 in

!

STH-0038-3 Ø = 1.5 in

!

VTH-0046-3 Ø = 1.8 in

!

VTH-0056-3 Ø = 2.2 in

!

STH-0046-3 Ø = 1.8 in

!

STH-0056-3 Ø = 2.2 in

Weight .33 lbs

Weight .66 lbs

HORIZONTAL HOLDER, rotary and adjustable *

ROTARY HORIZONTAL HOLDER *

!

CST-0036-3 Ø = 1.4 in

!

CST-0038-3 Ø = 1.5 in

!

HTH-0036-3 Ø = 1.4 in

!

HTH-0038-3 Ø = 1.5 in

!

CST-0046-3 Ø = 1.8 in

!

CST-0056-3 Ø = 2.2 in

!

HTH-0046-3 Ø = 1.8 in

!

HTH-0056-3 Ø = 2.2 in

Weight .88 lbs

*

!

See price list for a selection of Adapter Sleeves

Weight .33 lbs

13


14 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Rail supported arm (PR1) The PR1 rail supported arm is the most powerful arm of this type and has a very versatile design. The rails for the PR1 arm and smaller PR2 arm are the same. This has the advantage that if necessary both sizes of arm can be mounted on the same rail unit. The extension tube can be mounted at the required height. The weight of the tool is supported by gas springs.

Article Number

Load Capacity

Torque

Reach

PR1-0500-0102

2.2–4.4 lbs

442.5 in/lbs

+/-19.7 in

PR1-0500-0204

4.4–8.8 lbs

442.5 in/lbs

+/-19.7 in

PR1-0500-0405

8.8–11.0 lbs

442.5 in/lbs

+/-19.7 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Rail supported arm (PR1)

PILLAR !

BST-080X080X1300

RAIL !

BRL-3412

CABLE TROLLEY !

TRO-8040

Rec 1 piece/m

OFFSET BEAM !

OSB-080X040X0500

END STOP !

EST-3434

ARRESTING KIT 4 PCS !

AKI-MC6S06X040-1

ALUMINUM BEAM !

SBE-080X040

END COVER !

ECO-8040

EXTENSION TUBE !

TEX-P1

Rec 1 set/m

WEIGHT: 1.1 lbs

FIXED VERTICAL HOLDER, swiveling tool

ADJUSTABLE VERTICAL HOLDER !

ATH-4050-1 Ø = 15.7–19.7 in

FIXED VERTICAL HOLDER

!

ATH-5060-1 Ø = 19.7–23.6 in

!

Weight: .88 lbs

*

See price list for a selection of Adapter Sleeves

VTH-PF-057-1

Weight: 1.5 lbs

!

VTH-PS-057-1

Weight: 3.3 lbs

*

15


16 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Rail supported arm (PR2) The PR2 rail supported arm has a very flexible design and many practical accessories. We recommend that the rail supported arm is fitted with both a side stop and a height stop for maximum control and convenience. Because the same rails can be used for both the PR1 and PR2 arms it is possible to mount both sizes of arm on the same rail unit if needed. The extension tube can be mounted at the required height. If an adjustable working height is required, we recommend the adjustable extension tube. It can be adjusted between 15.75 and 27.6 in. Article Number

Load Capacity

Torque

Reach

PR2-0550-00025

0–5.5 lbs

177.0 in/lbs

+/- 18.1 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Rail supported arm (PR2)

PILLAR !

BST-080X040X1300

OFFSET BEAM !

OSB-080X040X0500

ARRESTING KIT 4 PCS !

AKI-MC6S06X040-1

Rec 1 set/m

ALUMINUM BEAM !

SBE-080X040

RAIL !

BRL-3412

CABLE TROLLEY END STOP !

EST-3434

!

TRO-8040

END COVER ECO-8040

Rec 1 piece/m

!

SIDE STOP

HEIGHT STOP

!

SAR-P2

!

TAR-P2

ADJUSTABLE VERTICAL HOLDER EXTENSION TUBE !

TEX-P2

Weight: 1.1 lbs

EXTENSION TUBE, adjustable !

THA-P2

Weight: 1.3 lbs

!

ATH-2540-2 Ø = 0.98–1.6 in

!

ATH-4050-2 Ø = 1.6–1.96 in

Weight .44 lbs

VERTICAL HOLDER, FIXED VERTICAL HOLDER

*

VTH-0036-2 Ø = 1.4 in

!

STH-0036-2 Ø = 1.4 in

!

VTH-0038-2 Ø = 1.5 in

!

STH-0038-2 Ø = 1.5 in

!

VTH-0046-2 Ø = 1.8 in

!

STH-0046-2 Ø = 1.8 in

!

VTH-0056-2 Ø = 2.2 in

!

STH-0056-2 Ø = 2.2 in

Weight .44 lbs

*

adjustable in two axis

!

See price list for a selection of Adapter Sleeves

Weight .66 lbs

17


18 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Rail supported arm (PR3) The PR3 rail supported arm has a very flexible design and is used exclusively for fine mechanical work. There are tool holders for both vertical and horizontal operations. The rails can be ordered in the required length and can be mounted on the ceiling, wall or floor. A height stop and extension tube are standard equipment with the arm, giving excellent accessibility, convenience and control.

Article Number

Load Capacity

Torque

Reach

PR3-0500-0001

0–2.2 lbs

30.98 in/lbs

+/- 17.3 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

Accessories Rail supported arm (PR3)

PILLAR !

BST-080X040X1300

OFFSET BEAM !

RAIL

OSB-080X040X0500

!

BRL-8040

END STOP !

EST-2020

CABLE TROLLEY !

TRO-PR3

Rec 1 piece/m

END COVER !

ECO-8040

ADJUSTABLE VERTICAL HOLDER

EXTENSION TUBE

!

ATH-2540-3 Ø = 0.98–1.6 in

HEIGHT STOP

!

ATH-4050-3 Ø = 1.6–1.96 in

!

Weight .44 lbs

TAR-P3

Included.

!

TEX-P3

Weight: .31 lbs Included.

HORIZONTAL HOLDER, FIXED VERTICAL HOLDER

rotary and adjustable

*

!

VTH-0036-3 Ø = 1.4 in

!

CST-0036-3 Ø = 1.4 in

!

VTH-0038-3 Ø = 1.5 in

!

CST-0038-3 Ø = 1.5 in

!

VTH-0046-3 Ø = 1.8 in

!

CST-0046-3 Ø = 1.8 in

!

VTH-0056-3 Ø = 2.2 in

!

CST-0056-3 Ø = 2.2 in

Weight .33 lbs

Weight .88 lbs

VERTICAL HOLDER, adjustable in two axis

ROTARY HORIZONTAL HOLDER *

STH-0036-3 Ø = 1.4 in

!

HTH-0036-3 Ø = 1.4 in

!

STH-0038-3 Ø = 1.5 in

!

HTH-0038-3 Ø = 1.5 in

!

STH-0046-3 Ø = 1.8 in

!

HTH-0046-3 Ø = 1.8 in

!

STH-0056-3 Ø = 2.2 in

!

HTH-0056-3 Ø = 2.2 in

Weight .66 lbs

*

*

!

See price list for a selection of Adapter Sleeves

Weight .33 lbs

19


20 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Smart Motion

Pillar mounted folding arms model POS-100 & POS-300 Smart Motion ergonomic folding arms assist operators who work with heavier assembly work. The result is a safer and more efficient work station design. The POS-100 and POS-300 are complete folding arm packages that can be used for many different types of mounting, including rail-mounting applications. Folding arms are often used with screwdrivers or nutrunners, but can also be used with other types of tools and applications, such as drilling equipment, tapping application and different types of material handling applications. Our range of tool attachments makes all variations of screwdriver operation possible; horizontal, vertical or rotational. Fast installation, minimal maintenance and long life are characteristics of the POS units.

Performance

Article Number

Load Capacity

Torque

PS-100

33.1 lbs

885.0 in/lbs

Max reach 78.7 in

PS-300

66.1 lbs

2655.0 in/lbs

78.7 in


w w w. k o l v e r u s a . c o m / S M A R T M O T I O N C ATA L O G

How to choose a tool holder/when you need a brake There are nine different tool configurations available to cover the most common operations with an inline or right angled tool. Follow the guide below to identify the specific tool holder needed and brake required: !

Do you have an inline or right angled tool?

!

Is the tool performing horizontal and/or vertical rotations?

!

Is the tool fixed or swivel mounted (i.e. rotate about its axis)?

!

What is the diameter of the attachment point on the tool? For optimal fit, provide the tool make and model number when ordering.

Inline tool holders

No Brake

Brake Required

0 - 885.0 in/lbs !

S-PTH-F75

Ø = < 2.95 in Weight 12.1 lbs

885.0 - 2655.0 in/lbs !

D-PTH-F75

Ø = < 2.95 in Weight 14.3 lbs

P/N for tool holder required

No Brake

0 - 885.0 in/lbs !

S-PTV-F75-L100

Ø = < 2.95 in Weight 19.8 lbs

885.0 - 2655.0 in/lbs !

D-PTV-F75-L300 Ø = < 2.95 in Weight 33 lbs

P/N for tool holder required

0 - 885.0 in/lbs !

S-PTR-F75-L100

Ø = < 2.95 in Weight 23.1 lbs

885.0 - 2655.0 in/lbs !

D-PTR-F75-L300 Ø = < 2.95 in Weight 34.6 lbs

P/N for tool holder required

21


22 S M A R T M O T I O N C ATA L O G / w w w. k o l v e r u s a . c o m

Right angled tool holders

No Brake

No Brake

0 - 885.0 in/lbs !

S-PTV-F75

Ø = < 2.95 in Weight 14.3 lbs

885.0 - 2655.0 in/lbs !

D-PTV-F75

Ø = < 2.95 in Weight 16.1 lbs

Brake Required

0 - 885.0 in/lbs !

S-PTV-S75

0 - 885.0 in/lbs

Ø = < 2.95 in Weight 16.1 lbs

885.0 - 2655.0 in/lbs !

D-PTV-S75

Ø = < 2.95 in Weight 19.8 lbs

!

S-PTH-F75-L100

Ø = < 2.95 in Weight 17.6 lbs

885.0 - 2655.0 in/lbs !

D-PTH-F75-L300 Ø = < 2.95 in Weight 31 lbs

P/N for tool holder required

P/N for tool holder required

P/N for tool holder required

Brake Required

Brake Required

Brake Required

0 - 885.0 in/lbs !

S-PTH-S75-L100

Ø = < 2.95 in Weight 19.4 lbs

885.0 - 2655.0 in/lbs !

D-PTH-S75-L300 Ø = < 2.95 in Weight 34.6 lbs

P/N for tool holder required

0 - 885.0 in/lbs !

S-PTR-F75-2L100

0 - 885.0 in/lbs Ø = < 2.95 in Weight 28.7 lbs

885.0 - 2655.0 in/lbs !

D-PTR-F75-2L300

Ø = < 2.95 in Weight 51.8 lbs

P/N for tool holder required

!

S-PTR-S75-2L100

Ø = < 2.95 in Weight 30.2 lbs

885.0 - 2655.0 in/lbs !

D-PTR-S75-2L300

Ø = < 2.95 in Weight 53.4 lbs

P/N for tool holder required


Options As an option POS-100 & POS-300 can be equipped with an operator assist feature to activate the machine. This gives the operator an additional force upwards or downwards when the machine is used, which gives the operator relief in their daily assembly work. Requires an electrical control signal 24 VDC.

Additional Smart Motion arms Smart Motion offers a large range of arms to meet the many types of assembly production needs. Below are examples of Parallel Arms for Vertical Applications, Rail Arms mounted to Overhead Rails, and Torque Tubes mounted to Overhead Rails. Our standard arms are designed to cover a large range of our clientsâ&#x20AC;&#x2122; needs. We also offer the service of custom designs for special applications.

Application examples


CAT1 1009 4M

KOLVER USA 1 Park Drive Unit 9 Westford, Massachusetts, 01886 USA phone: 978 692 5166 fax: 978 692 3042 www.kolverusa.com

Smart Motion Catalog  

Smart Motion Catalog

Read more
Read more
Similar to
Popular now
Just for you