Page 1

Things to Keep in Mind for Indoor Shooting Range Ventilation Watching an indoor shooting sports event may sound interesting to you but it may also bring along some dangerous effects too. Yes, you might not even realize that if an indoor shooting range lacks proper ventilation system it may cause airborne lead particles that can be equally harmful for the shooters and viewers in the range area. Perhaps, this is the reason that it has been made mandatory in many states to install proper indoor shooting range ventilation to avoid such dangerous circumstances in an indoor shooting arena. Reading this article, you will learn about some essential things to keep in mind for Indoor Shooting Range Ventilation. Actual Speed of Air Inside the Range Area:The first thing to keep in mind while planning to get an HVAC system for an indoor shooting range is to check the actual speed of air inside the range area. The attempt should be to provide contamination free fresh air to the shooter to breath during the firing event. Not just contamination free air but every effort should be made to maintain a steady air flow within the range by installing a good ventilation system. Generally, an average speed of 50 to 75% per minute speed of air inside the range is considered ideal with the help of a ventilation system. Breath Ability Degree:Experts believe that during a shot in a shooting region, constant friction as leads to stick in the gun and get suspended in air during each shot. This in turn may led to reduced degree of breathing ability of air especially for the shooter, who stays in close proximity to the gun. So, in short, it is a must to get an Indoor Shooting Range Ventilation with a proper design to eliminate such difficulties in breathing ability during a shooting event. Measure for a Clear Vision: Third important thing to keep in mind for Indoor Shooting Range Ventilation is to ensure a clear vision while installing such a ventilation range. This is because an unclear vision may lead to difficulty for the shooter to shoot properly during an event. Moreover; every attempt should be made to ensure that smoke generated after every shoot gets ventilated properly to reduce the zero visibility chances for a shooter. Contamination Free Non-Range Areas:On the other hand, while installing an Indoor Shooting Range Ventilation, one must check that the entire region remains contamination free. Be it the main range area or non-range area, both the areas related to an indoor shooting range should remain contamination free of harmful carbon monoxide gas emissions that are usually eliminated through a ventilator system. Proper calculations to eliminate such contaminations should be checked beforehand before installing an HVAC system. So, to conclude we now assume that you know in detail about the main things to keep in mind before choosing a shooting range ventilation system for best efficiency.


Does the Shooting Range Ventilation System Remove the Dangers of Lead? Indoor shooting ranges are popular with everyone such as the law enforcement personnel and hobby shooters. These people along with the employees at the range remain at risk. Exposure to lead can cause a variety of problems and for this reason proper shooting range ventilation is quite important. As the popularity of the shooting ranges increase, so do the cases of lead poisoning. The reason is faulty system for ventilation. People working in such closed spaces tend to inhale lead dust. Inadequate cleaning causes build-up of these particles, making the situation extremely dangerous for the shooters and the employees. Proper shooting range ventilation effectively removes lead dust and helps everyone to breathe easy. Other than inhaling the dust from the lead particles generated after discharge of firearms, consumption of contaminated food and present of contaminants on hands might also lead to the problem. The best facilities understand the negative effects of exposure to lead and use appropriate measures to make the conditions ideal for everyone involved. It makes sense to know a little bit about lead poisoning because it will help you to understand the importance of quality ventilation in indoor shooting ranges. Lead will get inside the body of the individual when they absorb, ingest, or inhale these particles. You might have to poisoning unknowingly and that is why effective shooting range ventilation is critical. The early symptoms of poisoning tend to be non-specific and involve difficulty in concentration, weak feet or hands, fatigue, and headache. Anyone related to the shooting ranges have to undergo blood tests. This way it will become possible to measure lead amounts inside the body. As per the recommended standard, test done every 6 months is ideal. If you have been using the ranges on a regular basis, it is important to consider this. With the presence of the best shooting range ventilation, it is possible to minimize the exposure levels. When it comes to something as serious as lead you have to understand that there are no safe levels for this. You will further realize the necessity of good ventilation once you understand the negative effects of lead on your body. When you inhale or ingest this, it will enter your bloodstream and from then onwards distributes across the body. Gradually, it will travel to and collect, stored within the bones with long-term damage to their health and the organs of the individual. Your exposure length and the concentration of the lead inside the body determine the associated damage levels. Range owners should make sure that the shooting range ventilation is at par with the required standards. This way, everyone is happy and the shooters can practice their skills without worrying about poisoning from the lead at all times.


What is the Importance of Shooting Range Ventilation? If there is one sport that has gained immense popularity over the decades is none other than an indoor shooting event. Although, an exciting sports event, indoor shooting may lead to serious threats if some violations are done. The most serious among them are health threats due to lead accumulation in the range area. Perhaps, this is the reason that now ranges that are not properly ventilated often get slashed with a fine by state authorities. Installing an HVAC system in a shooting range area has more than one benefit. Here is more information on the importance of Shooting Range Ventilation: Helps Eliminating Contamination Through Guns:The biggest advantage of installing a Shooting Range Ventilation system is that it helps eliminating the contamination through guns during each shot. If the contamination gets accumulated it may led to serious health issues to the shooter as well as to those who clean the guns. The contamination could be so serious to harm the person’s hands and skin too by sticking the lead to the skin. This is where, a proper installed HVAC system can absorb all the lead particles and reduce such health threats. Reduces Exposure to Lead:On the other hand, one cannot deny the benefit of getting an efficient ventilation system in a range in reducing the exposure to lead. If one such ventilation system in installed, then no one inside the range need to worry about dust fumes coming out whenever a gun is shot. You can even freely eat and drink in the range by relying on the efficiency of such a system to clean the air. However; for better safety, experts recommend washing hands and changing gloves frequently after one such shooting extravaganza. Ensures Clean Air to Breath:At the same time, another benefit of installing a Shooting Range Ventilation is to ensure clean air to breath every single minute inside the range. Not just lead particles, but any sort of harmful gas inside the range area gets filtered to ultimately provide the insiders to inhale clean and fresh air. However; a good HVAC system will ensure that no carbon monoxide is emitted from the system inside the range. Re-circulates Air within Indoor Shooting Range: Most importantly, installing a Shooting Range Ventilation helps re-circulating air within the range after filtering out all the lead particles from the air. However; the efficiency of the filtration will depend on the type of filter used in the HVAC system. Most of the ranges use 100% air ventilation system to clean all the inside air by heating and cooling it off again. To conclude, it can now be said that only a good quality HVAC system can ensure proper environment inside the range without any worries for lead threats emitted after each gun shot. However; at the same time, we do believe that just by learning about the benefits of such a ventilation system is not enough, one should also know when to change its filters to maintain its efficiency inside the range.


Key Things to Know About Indoor Shooting Range HVAC An indoor shooting range serves both as a medium to enhance the shooting capabilities of the military forces and also as a medium of indoor sports events. However, at the same time, it is important to stick to some key guidelines related to such shooting range areas to ensure there is no threat to the health due to lead accumulation. For this, most of the ranges now get proper range HVAC units, so that those who spend hours within the range don’t get affected in terms of health in any way. Read on and learn about a few key things about Indoor Shooting Range HVAC. Air Pressure & Flow Balance:The first crucial thing to know about indoor shooting ventilation systems is the way it will help maintaining the air pressure and air flow balance. A good system will never fail in maintaining an optimum balance between the supply and return of air pressure inside the range. Refrigerants &Ductwork:Second main thing to consider regarding a Small Arms Ventilation System is the type of refrigerants used should meet the regulations charted out by the government authorities. Apart from this, the ductwork should be ideally placed and sealed to ensure a proper designing for an efficient operation inside the range. Proper Filtration:Third important thing to remember while installing a Range HVAC at a shooting area is to ensure regular change or cleaning of the filter that absorbs all the lead from the range. Moreover; it is equally important to know how to discard the waste accumulated in the filter, which is mostly lead and may again get exposed in air if not removed properly. Size of the HVAC:If you have sufficient funds, then don’t go for a small HVAC unit for your shooting range. Keep in mind that an improperly sized unit may not be of any use, so spending one time on the right size will ensure that there is no premature machine failure of the unit. Load Calculations:At the same time, one must also conduct a proper load calculation before Small Arms Ventilation System. In order to ensure proper efficiency of such a system, one must choose the right size and calculate the load. Remember, reusing any worn-out material of the unit may lead to poor efficiency in filtering the air in the range. ASHRAE Standards:Another important thing to consider before installing a Range HVAC is that it meets the standards of ASHRAE or American Society of Heating, Refrigerating and Air Conditioning Engineers. In fact, in many regions, it is mandatory to stick to these standards in a shooting range. Easy Customization:Lastly, make sure to check whether the Range HVAC that you wish to install in a shooting range is easy to customize. Before customization, one should also be able to understand the actual use of one such system in a range and then customize it as per requirement using different sets of accessories like bullet traps, firearm stalls and ceiling guards.

Shooting Range Ventilation  

Rushing Air Treated Air Systems 4405 Spring Cypress Road,Suite 202 Houston, TX 77056 (832) 791-5521 http://www.rushingair.net Rushing Air...

Shooting Range Ventilation  

Rushing Air Treated Air Systems 4405 Spring Cypress Road,Suite 202 Houston, TX 77056 (832) 791-5521 http://www.rushingair.net Rushing Air...

Advertisement