Oscillating Multi-Tool | Best Oscillating Tools http://www.OscillatingMulti-Tool.com
Oscillating Multi-Tool | Best Oscillating Tools >>> Get This... Oscillating Multi-Tool (AMAZING $300 Value) And Best Oscillating Tools! http://www.OscillatingMulti-Tool.com
So, What IS An Oscillating Multi-Tool?
If you have a job which involves cutting, sanding, or trimming any materials like plastic, wood, copper pipe, or PVC, an Oscillating Multi-Tool is the tool you're looking for. Since it has a small working radius, it is ideal for reaching tight areas a bigger tool cannot. With the right blade it is an invaluable tool. For example, you could remove a counter top without destroying a tile back splash, or remove grout around tile. For renovating projects on worn-out windows, sashes, and doors, it will make super-quick work of stripping old paint. The way the Oscillating Multi-Tool is designed to work, it will cut through hard surfaces, yet leave softer surfaces (such as you're finger) unharmed. When the Oscillating Multi-Tool was first designed, it was used for removing plaster casts in hospitals. This tool would quickly cut
through a cast, but leave the skin below without a scratch. If you want to add an Oscillating Multi-Tool to your tool box for simple jobs, the 1.5 Amp motor will be more than sufficient to get the it done. On the other hand, if you need it for bigger jobs like major remodeling or home construction, then you should probably opt for the more powerful 2.5 Amp motor. When you finally determine the kind of jobs and the kind of motor you need for the Oscillating Multi-Tool, you next need to decide whether to use a batteryoperated model or a plug-in model. The tool works great in cramped hard to reach places, and in this case a cordless model would be the best choice. But keep in mind, if you plan to use it for prolonged time periods you will need extra battery packs. If you're just an ordinary home handy-man, a plug-in model would probably be good enough for use around the house. Regardless of what your final decision is, just do not forget the adaptability of this tool. It has a wide range of uses, itâ€™s not just a cut-off saw. This handy tool can be used as a scrapper, a sander, or you can use it to cut metal, like nails for example, or saw through wood, and even plastic pipes. Were you aware that plumbers use this tool all the time to cut copper pipe because it leaves clean and even edges? The Oscillating Multi-Tool is so versitile that new and innovative uses are being developed for it each year, and brand new blade designs are being released all the time. Amazingly, there is even a customized blade specifically created for stripping caulk off of wooden boat decks that will leave the wood unmarked. A number of the custom blades tend to be steeply-priced, so to increase the usable life span of a blade it is best to let the Oscillating Multi-Tool do much of the work, instead of trying to force the blade with lots of pressure. It may cut slower this way, but it will certainly lenghten the life of the blade. Don't be impatient, you will notice that if you put too much cutting force on wood it will cause it to burn. So start with a very light pressure and increase gradually. Like most other new power tools, you may have to practice a little to get really good with it. So take a bit of time with some scrap wood and get an idea of what the Oscillating Multi-Tool can do. Don't panic, mastering the Oscillating Multi-Tool is actually fairly easy. And once you've gotten the basics down, you may just wonder how you ever did without this tool to begin with.
If you’re interested in getting more free content and information, just access this Oscillating Multi-Tool page. Cheers, Chris James
Published on Dec 20, 2011