30678_KX-TCD705G_a_English
➡ ◆
8/5/01
6:58 am
Page 40
Handset Programming Setting Time Alarm
The handset(s) will sound an alarm at a preset time for 30 seconds once or everyday. To set the time (24 hour clock), see below:In the ‘Setting Handset’ mode S/U
Y or V
Select ‘Time Alarm’
S/U Y or V <Enter Select ‘Set Alarm Time’
Time> Y or V (24hr Clock) NOTE: If time has previously been set, it will be displayed.
S/U
Y or V
Select ‘Save’
• To set the alarm ON/OFF, etc. see page 37.
To Stop the Alarm When the alarm sounds and ‘Time Alarm’ is shown on the display, press any dialling button K to I, $, L , % or O to stop alarm. The alarm time turns off and the display returns to the standby mode. If ‘Once’ is selected, the setting is automatically turned off. If the unit is in the talk, speakerphone or intercom mode during the alarm time, the alarm will not sound. After finishing, the alarm will start ringing.
◆
Setting Direct Call Number
ASetting H/
You can store one number in the Direct Call memory. This feature allows you to make a call easily by pressing O or %.Incoming calls are accepted. In the ‘Setting Handset’ mode S/U
Y or V
Select ‘Call Option’
S/U
Y
<Enter Phone No.>
Select ‘Direct Call No.’
NOTE: If number has previously been entered, the number is displayed. To edit the number, see page 20. • To set the Direct Number ON/OFF, see page 38.
Y
S/U
Y or V
Select ‘Save’
Dialing the Stored Number 1. Make sure that “ “ is displayed in the standby mode. 2. Z O or %. The number stored in the direct call memory is dialled automatically. When the handset is in the ‘Direct Call’ mode, it is not possible to make any calls until direct call is cancelled. This also includes emergency calls.
40