Page 1

Roto Roof Windows Opening Sizes for Combination Flashing Kits Without Insulation Collar 2 x 1 Combination windows 35mm x 740mm x 5mm x 100mm x 5mm x 740mm x 35mm 3 x 1 Combination windows 35mm x 740mm x 5mm x 100mm x 5mm x 740mm x 5mm x 100mm x 5mm x 740mm x 35mm With Insulation Collar 2 x 1 Combination windows 35mm x 740mm x 35mm x 100m x 35mm x 740mm x 35mm 3 x 1 Combination Windows 35mm x 740mm x 35mm x 100mm x 35mm x 740mm x 35mm x 100mm x 35mm x 740mm x 35mm Note: The above measurements are based on 740mm x 980mm sized window and 100mm rafters between the windows Note: If you have more windows continue the combination pattern until required Note: For trimmers at top and bottom of the window there should be a minimum of 35mm but more is required to create a splay at the top and bottom of the window. This allows more light and reduces the possibility of condensation along with the pre fitted vapour barrier The Roto Principle: More freedom. More convenience.

Roto Roof Windows - Opening Sizes for Combination Flashing Kits  

Opening Sizes for Combination Flashing Kits

Read more
Read more
Similar to
Popular now
Just for you