Page 1


SERIES GW WORM REDUCTION PRODUCT FEATURES Hub City is introducing a new product design of 7” and larger center distance worm gear drives. In this catalog are the features, ratings, dimensions and design details of the new GW series worm gear drives.

• Rugged iron housings, covers, and flanges provide superior strength and rigidity.

• Oversized steel output shafts provide superior over-hung load and torque characteristics.

• Two separate housings in the double reduction design insures long trouble free life of all components.

• Large oil capacity provides positive splash lubrication and superior cooling capability.

• The worm shaft is cut integral with the input shaft then hardened, ground, and polished to provide maximum efficiency with minimum gear noise.

• Metal nameplate drive screwed to housing insures easy field identification for repair parts and replacement.

• The bronze worm gear is chill cast from the highest quality bronze to provide superior wear and lubricity characteristics for longer life and higher efficiency.

• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.

• Premium tapered roller bearings on output shafts provide greater life, overhung load and thrust capacity.


GW WORM GEAR DRIVES Worm Gear Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFC Single Reduction Worm Gear Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 to 5 Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 to 5 Double Reduction Worm Gear Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 to12 Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 to 12 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Warnings & Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Terms & Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

EMAIL: sales@hubcityinc.com

WEB: www.hubcityinc.com

1


HUB CITY GW WORM GEAR DRIVES

R a t i n g Ta b l e Series GW 700 Ratio

5 7 1/2 10 15 20 25 30 40 50 60 70

Series GW 800

Input RPM

Output RPM

Input HP

Output HP

Output TQ OHL

Input HP

Output Output HP TQ

1750 1170 870 100

341.5 228.3 169.8 19.5

51.170 43.353 38.427 9.250

49.115 41.324 36.392 8.181

9062 11404 13506 26416

6209 6209 6209 6209

66.875 56.618 50.159 13.930

64.312 54.111 47.652 12.417

1750 1170 870 100

236.5 158.1 117.6 13.5

41.546 35.247 30.763 6.968

39.684 33.389 28.923 6.089

10572 13304 15499 28388

6209 6209 6209 6209

54.370 46.092 40.874 9.723

1750 1170 870 100

179.5 120.0 89.2 10.3

35.744 30.368 26.470 6.153

33.884 28.509 24.631 5.256

11893 14967 17391 32282

6209 6209 6209 6209

1750 1170 870 100

119.3 79.8 59.3 6.8

25.978 22.136 19.580 4.157

24.294 20.441 17.881 3.436

12827 16143 18991 31744

1750 1170 870 100

85.4 57.1 42.4 4.9

19.916 17.045 15.130 3.345

18.199 15.312 13.392 2.595

1750 1170 870 100

71.4 47.8 35.5 4.1

16.911 14.060 12.906 2.821

1750 1170 870 100

59.3 39.7 29.5 3.4

1750 1170 870 100

Series GW 1000 OHL

Input HP

Output Output HP TQ OHL

11866 14932 17685 36447

7761 7761 7761 7761

104.651 88.498 78.334 22.115

100.915 84.908 74.774 19.802

18619 23431 27750 63935

11028 11028 11028 11028

52.053 43.796 38.569 8.536

13867 17451 20668 39793

7761 7761 7761 7761

84.411 71.469 63.321 16.549

81.109 68.243 60.098 14.659

21413 26947 31914 67727

11028 11028 11028 11028

43.319 36.771 32.648 7.960

41.160 34.631 30.498 6.831

14447 18181 21532 41958

7761 7761 7761 7761

67.117 56.888 50.458 13.678

64.006 53.853 47.425 11.837

22466 28273 33484 72712

11028 11028 11028 11028

6209 6209 6209 6209

33.822 28.791 25.297 5.747

31.753 26.716 23.230 6.820

16766 21099 24672 44195

7761 7761 7761 7761

52.789 44.862 39.876 9.949

49.825 41.921 36.918 8.365

26308 33107 39209 77295

11028 11028 11028 11028

13431 16903 19880 33520

6209 6209 6209 6209

25.929 22.162 19.506 4.630

23.815 20.037 17.390 3.623

17575 22118 25815 46792

7761 7761 7761 7761

40.433 34.481 30.748 8.011

37.394 31.462 27.707 6.350

27597 34730 41131 82011

11028 11028 11028 11028

15.264 12.444 11.234 2.124

13462 16417 19931 32790

6209 6209 6209 6209

21.937 18.791 16.649 3.862

19.930 16.769 14.624 2.943

17578 22122 25946 45421

7761 7761 7761 7761

34.199 29.224 26.104 6.703

31.313 26.346 23.201 5.175

27618 34756 41163 79871

11028 11028 11028 11028

14.112 11.909 10.791 2.295

12.576 10.382 9.234 1.681

13356 16491 19725 31233

6209 6209 6209 6209

17.925 14.993 13.674 2.936

16.164 13.257 11.890 2.211

17166 21058 25398 41088

7761 7761 7761 7761

28.529 24.435 21.272 5.490

25.831 21.734 18.617 4.122

27433 34523 39769 76598

11028 11028 11028 11028

43.8 29.3 21.8 2.5

10.880 9.178 8.450 1.935

9.305 7.622 6.845 1.278

13399 16416 19828 32194

6209 6209 6209 6209

14.079 12.170 10.881 2.644

12.158 10.229 8.933 1.773

17507 22032 25875 44687

7761 7761 7761 7761

21.818 18.795 16.908 4.539

19.077 16.051 14.135 3.105

27471 34571 40943 78246

11028 11028 11028 11028

1750 1170 870 100

35.0 23.4 17.4 2.0

8.740 7.426 6.857 1.615

7.228 5.930 5.317 0.988

13011 15966 19250 31109

6209 6209 6209 6209

11.317 9.838 8.837 2.224

9.460 7.959 6.951 1.380

17028 21429 25166 43469

7761 7761 7761 7761

17.476 15.128 13.204 3.793

14.835 12.482 10.618 2.411

26703 33605 38444 75935

11028 11028 11028 11028

1750 1170 870 100

29.2 19.5 14.5 1.7

7.003 6.033 5.513 1.273

5.657 4.687 4.146 0.744

12220 15143 18014 28131

6209 6209 6209 6209

9.048 7.629 7.126 1.748

7.399 6.014 5.446 1.038

15982 19430 23663 39244

7761 7761 7761 7761

13.983 12.152 10.762 3.013

11.624 9.780 8.416 1.829

25107 31597 36566 69119

11028 11028 11028 11028

1750 1170 870 100

25.0 16.7 12.4 1.4

5.740 4.963 4.567 1.094

4.484 3.709 3.290 0.595

11300 13979 16676 26222

6209 6209 6209 6209

7.370 6.242 5.854 1.476

5.850 4.755 4.306 0.821

14743 17921 21829 36215

7761 7761 7761 7761

11.431 9.979 8.845 2.589

9.220 7.758 6.655 1.464

23235 29240 33736 64584

11028 11028 11028 11028

Note: All torque values listed in inch-pounds, all overhung load values listed in pounds. The point of application of the overhung load is considered to be one shaft diameter measured outward from the gear case housing. At speeds above 1750 RPM, units may become thermally limited. For extended operation, limit input HP to 1750 RPM catalog rating.

Thrust and Overhung Load Ratings (Lbs.) Thrust Load Ratings (Low Speed Shaft, All Ratios) Overhung Load Capacity* (High Speed Shaft, All Ratios) Overhung Load Capacity** (Extended Brg Design Output Shaft, All Ratios)

GW700

GW800

GW1000

4009 450 3791

4777 450 4850

6808 500 8500

*The point of application of the overhung load is considered to be one shaft diameter measured outward from the gearcase housing. **Load Located at end of output shaft.

2

CALL: (605) 225-0360

FAX: (605) 225-0567


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW701, GW801, GW1001 C-Flange Adapter must be ordered separately - see page 13. L

FA FZ

I

N

N

N

N BF, (4) EQ. SP. ON AJ BOLT CIRCLE OD DIA.

M BD DIA.

S

O

USEABLE

U DIA.

E

O*

P

C

D

AK DIA.

BORE DIA.

T DIA.

T DIA.

T DIA.

U DIA. P

K

H (8) TAPPED HOLES (4) TOP & (4) BOTTOM

S USEABLE

P

T DIA.

B

LM LM1

L

USEABLE

USEABLE

P

USEABLE

USEABLE

J

(NEMA MOTORS ONLY) CL

O

G

G

BE1 BE

O*

F A

F A

Standard Styles Available

B

A

C

Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings or assembly position options. Assembly positions also apply to motor flange unit.

UNIT A GW701 7.63 GW801 8.63 GW1001 9.53

B C D E F FA FZ 14.88 18.91 7.59 7.000 5.50 11.37 .35 17.00 20.96 8.86 8.000 6.50 12.52 .57 20.88 25.47 10.36 10.000 6.88 14.69 .51

UNIT P** S** GW701 5/8 x 4.00 3/8 x 2.87 GW801 3/4 x 4.50 1/2 x 2.81 GW1001 7/8 x 5.00 1/2 x 3.69

T Dia. 2.750 3.000 3.750

U Dia. 1.625 1.875 2.250

*applies to double output shaft **keyway width by length

G H H Depth J K L M 2.75 1-8 1.56 12.50 6.25 11.50 2.97 3.25 1-8 1.66 14.25 7.13 12.50 2.84 3.44 1 1/4-7 2.04 17.75 8.88 15.50 3.76

N O 11.76 5.65 12.25 5.98 14.75 6.76

O* 5.65 5.98 6.76

NEMA Motor Data NEMA Motor Mounting Dimensions Frame

AJ

AK

BD

OD

180TC 7.25 8.50 9.00 210TC 7.25 8.50 9.00 250TC 7.25 8.50 9.00

BE BE1 BORE

N/A N/A .50 N/A N/A .50 N/A N/A .50

KWY.**

BF***

1.125 1/4 x 1/8 1.375 5/16 x 5/32 1.625 3/8 x 3/16

.53 .53 .53

**keyway width by depth Note: All dimensions listed are for reference only. Contact factory for certified dimensions. WARNING For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

EMAIL: sales@hubcityinc.com

NEMA Motor Flange Face Locations UNIT

180TC 210TC 250TC LM1 LM1 LM1

GW701 GW801

15.50 N/A

15.50 16.58

15.50 16.58

WEB: www.hubcityinc.com

3


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW702, GW802, GW1002 C-Flange Adapter must be ordered separately - see page 13. H DIA. FA

(NEMA MOTORS ONLY)

AF

RAD.

AF

L

I

DOTTED OUTLINES INDICATE OPTIONAL MOUNTINGS OD DIA. BORE DIA.

DOTTED OUTLINES INDICATE BF, (4) EQ. SP. OPTIONAL MOUNTINGS ON AJ BOLT CIRCLE

M

FZ AA

AK DIA.

S

USEABLE

CL

LM1

S

USEABLE

BD DIA.

U DIA. E C

V DIA.

V DIA.

U DIA. BE1 BE

D AB

LM L

T DIA. G

G

3 SETSCREWS EACH END 120째 APART

AC

B

AE2

F

AD AG

AC

AE1

AC

AE2

F

AD

AG

AC

AE1

Standard Styles Available

A

B

Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings or assembly position options. Assembly positions also apply to motor flange units.

UNIT AA GW702 N/A GW802 N/A GW1002 N/A

AB N/A N/A N/A

AC 1.06 1.06 1.33

UNIT M RAD. S** GW702 2.97 N/A 3/8 x 2.87 GW802 2.84 N/A 1/2 x 2.81 GW1002 3.76 N/A 1/2 x 3.69

AD 11.36 12.48 15.78

AE1 1.09 1.03 1.39

AE2 AF AG B 1.09 N/A 13.50 14.88 1.03 N/A 14.50 17.00 1.39 N/A 18.50 20.88

T-max* T-kwy*** U Dia. V Dia. 3.938 1 x 1/2 1.625 4.92 4.438 1 x 1/2 1.875 5.55 5.438 1-1/4 x 5/8 2.250 6.67

*T dimensions are for max. bore diameter. For other bore dimensions, refer to catalog page 14. **keyway width by length ***keyway width by depth

C D E F FA 18.91 7.59 7.000 5.50 11.37 20.96 8.86 8.000 6.50 12.52 25.47 10.36 10.000 6.88 14.69

FZ .35 .57 .51

G H Dia. I L 2.75 N/A N/A 11.50 3.25 N/A N/A 12.50 3.44 N/A N/A 15.50

NEMA Motor Data NEMA Motor Mounting Dimensions Frame AJ AK BD 180TC 7.25 8.50 9.00 210TC 7.25 8.50 9.00 250TC 7.25 8.50 9.00

OD BE BE1 N/A N/A .50 N/A N/A .50 N/A N/A .50

BORE KWY.** 1.125 1/4 x 1/8 1.375 5/16 x 5/32 1.625 3/8 x 3/16

BF*** .53 .53 .53

**keyway width by depth

NEMA Motor Flange Face Locations Note: All dimensions listed are for reference only. Contact factory for certified dimensions.

UNIT

180TC 210TC 250TC LM1 LM1 LM1

GW702 GW802

15.50 N/A

WARNING

For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

4

CALL: (605) 225-0360

FAX: (605) 225-0567

15.50 16.58

15.50 16.58


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW707, GW807, GW1007 L

E

I

M S

AM

C-Flange Adapter must be ordered separately - see page 13.

FA

USEABLE

(NEMA MOTORS ONLY) LM LM1

U DIA.

AC VIEW "A-A"

N

FH

H DIA. (4) HOLES

P

O

A

USEABLE

B

USEABLE

AD TAP V

T DIA.

S

AC

D

CL

L

J

BE

BE1

U DIA.

A

A

F

Standard Styles Available

R

L

Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings or assembly position options. Assembly positions also apply to motor flange units.

UNIT A AC AD GW707 22.00 1.000 .38-16 UNC X 1.00 DP GW807 28.00 1.062 .62-11 UNC X 1.50 DP GW1007 32.00 1.188 .62-11 UNC X 1.50 DP UNIT S** GW707 3/8 x 2.87 GW807 1/2 x 2.81 GW1007 1/2 x 3.69

T Dia. 2.937 3.438 3.938

AM B D E F FA FH H Dia. 6.06 22.00 8.50 7.000 19.00 11.3710.75 1.13 6.22 28.00 10.00 8.000 24.00 12.5213.75 1.31 7.94 32.00 12.50 10.000 28.00 14.6917.00 1.31

U Dia. V 1.625 1.75 1.875 2.00 2.250 2.25

Note: “O” on units size 700 through 1000 is the minimum dimension to output seal or screw head. **keyway width by length

I J L M N O P** N/A 19.00 11.50 2.97 24.00 7.63 3/4 X 6.44 N/A 24.00 12.50 2.84 27.06 9.25 7/8 X 8.00 N/A 28.00 15.50 3.76 29.50 9.43 1 X 7.75

NEMA Motor Data NEMA Motor Mounting Dimensions Frame AJ AK BD 180TC 7.25 8.50 9.00 210TC 7.25 8.50 9.00 250TC 7.25 8.50 9.00

OD BE BE1 N/A N/A .50 N/A N/A .50 N/A N/A .50

BORE KWY.** 1.125 1/4 x 1/8 1.375 5/16 x 5/32 1.625 3/8 x 3/16

BF* .53 .53 .53

**keyway width by depth

Note: All dimensions listed are for reference only. Contact factory for certified dimensions. WARNING For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

EMAIL: sales@hubcityinc.com

NEMA Motor Flange Face Locations 180TC 210TC 250TC UNIT LM LM1 LM1 GW707 15.50 15.50 15.50 GW807 N/A 16.58 16.58

WEB: www.hubcityinc.com

5


HUB CITY GW WORM GEAR DRIVES

R a t i n g Ta b l e Series GW7000 Ratio

75 100 150 200 250 300 400 500 600 750 900 1000 1200 1500 1800 2400 3000 3600

Input Output RPM RPM

Series GW8000

Input HP

Output HP

Output TQ

OHL

1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870

23.1 15.4 11.5 16.5 11.0 8.21 11.4 7.61 5.66 8.54 5.71 4.24 7.14 4.78 3.55

9.13 7.69 6.80 9.13 7.04 5.61 7.25 5.31 4.18 5.81 4.21 3.29 4.90 3.55 2.77

7.55 6.16 5.32 7.22 5.37 4.16 5.53 3.90 2.98 4.32 3.00 2.28 3.54 2.46 1.86

20601 25161 29208 27535 30607 31879 30621 32270 33158 31857 33136 33817 31238 32432 33067

6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209

1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870 1750 1170 870

5.69 3.80 2.83 4.27 2.85 2.12 3.41 2.28 1.70 2.85 1.90 1.41 2.38 1.59 1.18 1.98 1.32 .983 1.75 1.17 .87 1.42 .951 .707 1.19 .796 .592 .989 .661 .492 .729 .488 .363 .583 .390 .290 .486 .325 .242

4.27 3.06 2.39 3.41 2.43 2.10 2.86 2.04 1.59 2.53 1.81 1.42 2.13 1.53 1.20 1.73 1.24 .972 1.73 1.24 .976 1.52 1.10 .871 1.28 .929 .739 1.04 .755 .603 .899 .654 .525 .758 .554 .446 .598 .437 .353

2.99 2.05 1.55 2.29 1.56 1.17 1.85 1.26 .944 1.56 1.06 .79 1.27 .862 .645 1.01 .679 .508 .949 .640 .477 .794 .534 .399 .648 .436 .325 .511 .344 .256 .389 .262 .195 .301 .202 .151 .226 .152 .113

33136 34024 34489 33805 34477 34830 34209 34752 35036 34477 34936 35174 33682 34109 34331 32016 32391 32585 35031 35308 35452 35168 35402 35522 34325 34542 34654 32580 32770 32868 33661 33868 33975 32512 32710 32813 29307 29473 29558

6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209 6209

Input HP 15.5 12.0 9.57 12.6 9.55 7.64 9.82 7.23 5.71 7.92 5.75 4.50 6.61 4.80 3.76 5.82 4.19 3.26 4.65 3.33 2.59 3.88 2.78 2.16 3.43 2.46 1.92 2.87 2.05 1.60 2.50 1.80 1.42 2.34 1.68 1.32 2.05 1.48 1.16 1.71 1.23 .979 1.29 .928 .738 1.20 .869 .694 1.02 .743 .595 .801 .583 .470

Series GW10000

Output HP

Output TQ

OHL

Input HP

13.0 9.78 7.61 10.1 7.40 5.76 7.62 5.41 4.15 5.98 4.18 3.18 4.88 3.40 2.58 4.17 2.87 2.17 3.20 2.19 1.65 2.60 1.77 1.33 2.18 1.48 1.11 1.77 1.20 .898 1.47 .991 .740 1.33 .899 .672 1.12 .752 .561 .903 .608 .454 .674 .453 .338 .544 .366 .273 .423 .285 .213 .317 .213 .159

35507 39931 41787 38575 42191 44192 42212 44811 46217 44158 46181 47264 43010 44863 45852 46181 47593 48334 47245 48316 48879 45835 46812 47326 48316 49049 49429 46812 47481 47827 46627 46972 47150 49201 49644 49874 49420 49793 49986 47819 48159 48334 42944 43207 43342 46987 47314 47482 45708 46025 46189 41112 41376 41512

7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761 7761

26.5 20.4 16.3 20.8 16.2 13.0 16.5 12.3 9.78 13.5 9.93 7.83 11.3 8.31 6.55 10.1 7.29 5.71 8.12 5.85 4.58 6.89 4.96 3.88 6.03 4.34 3.40 5.04 3.63 2.85 4.13 2.97 2.33 4.21 3.05 2.41 3.73 2.72 2.15 3.13 2.28 1.81 2.56 1.86 1.48 2.17 1.59 1.26 1.83 1.35 1.08 1.46 1.07 .856

Output HP 22.5 16.9 13.2 17.0 12.8 10.0 13.0 9.38 7.25 10.3 7.31 5.59 8.45 5.96 4.55 7.29 5.06 3.84 5.62 3.87 2.92 4.57 3.13 2.35 3.86 2.63 1.97 3.13 2.13 1.60 2.49 1.69 1.27 2.37 1.60 1.20 1.98 1.34 1.00 1.61 1.09 .811 1.28 .860 .643 .964 .650 .486 .780 .505 .377 .565 .381 .285

Output TQ

OHL

61010 68348 72067 64363 72302 76335 72069 77678 80749 76261 80671 83051 74571 78638 80828 80671 83779 85419 83011 85377 86628 84431 86351 87361 85377 87006 87854 82964 84459 85236 79353 80681 81371 87344 88332 88847 87832 88666 89097 85216 85980 86375 81353 82031 82381 83314 84037 84411 80836 81535 81896 73284 73877 74183

11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028 11028

Note: All torque values listed in inch-pounds, all overhung load values listed in pounds. The point of application of the overhung load is considered to be one shaft diameter measured outward from the gear case housing. See page 2 for extended bearing and input shaft overhung load (OHL) capacity. At speeds above 1750 RPM, units may become thermally limited. For extended operation, limit input HP to 1750 RPM catalog rating.

High Speed Shaft Overhung Load Capacity (LBS.) Unit Size O.H.L. Capacity

GW7000 150

GW8000 GW10000 175 300

See page 2 for L.S. OHL and Thrust Ratings

6

CALL: (605) 225-0360

FAX: (605) 225-0567


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW7001, GW8001, GW10001 SECONDARY UNIT

N

PRIMARY UNIT

FA

N L

BC

M

I

S USEABLE

R

X Y

E

Z

U DIA. P

C

USEABLE

T DIA.

D

T DIA.

O*

P USEABLE

O K

H (8) TAPPED HOLES (4) TOP & (4) BOTTOM

J B

F A

BJ

G

Standard Styles Available

RA

DR

LB

UL

LA UR

RB

DL

L

LR

R

STYLE UR-LR Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings. Assembly positions also apply to motor flange units.

UNIT A B BC BJ C D E F FA G H H Depth I J K GW7001 7.63 14.88 12.96 24.33 20.46 7.59 7.000 5.50 10.63 2.75 1-8 1.56 N/A 12.50 6.25 GW8001 8.63 17.00 13.94 26.69 23.79 8.86 8.000 6.50 11.93 3.25 1-8 1.66 N/A 14.25 7.13 GW10001 9.53 20.88 17.05 32.74 29.24 10.36 10.000 6.88 14.34 3.44 1 1/4-7 2.04 N/A 17.75 8.88 UNIT GW7001 GW8001 GW10001

O* P** R S** T Dia. 5.69 5/8 x 4.00 4.33 3/16 x 1.75 2.750 6.02 3/4 x 4.50 4.11 1/4 x 2.88 3.000 6.80 7/8 x 5.00 5.12 1/4 x 3.00 3.750

L M N O 6.76 2.38 11.76 5.69 9.57 3.47 12.25 6.02 10.88 3.38 14.75 6.80

U Dia. X Y Z .875 3.250 3.50 9.38 1.250 4.250 4.44 11.38 1.250 5.250 5.12 14.00

*applies to double output shaft **keyway width by length

EMAIL: sales@hubcityinc.com

WEB: www.hubcityinc.com

7


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW7002, GW8002, GW10002 H DIA.

AF

RAD.

DOTTED OUTLINES INDICATE OPTIONAL MOUNTINGS

SECONDARY UNIT FA

PRIMARY UNIT

I

BC U DIA.

AA

M S

L

USEABLE

X Z Y

E

C

V DIA. D AB

T DIA. 3 SETSCREWS EACH END 120째 APART

G

BH B

AC

F

AE2

AD

AC

AE1 AG

Standard Styles Available

RA

DR

LB

UL

LA

UR

RB

DL

ONLY ONE SECONDARY STYLE AVAILABE. ORDER BY PRIMARY STYLE ONLY.

STYLE UR Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings. Assembly positions also apply to motor flange units.

UNIT GW7002 GW8002 GW10002

AA N/A N/A N/A

AB N/A N/A N/A

AC AD AE1 AE2 AF AG B 1.06 11.36 1.09 1.09 N/A 13.50 14.88 1.06 12.48 1.03 1.03 N/A 14.50 17.00 1.33 15.78 1.39 1.39 N/A 18.50 20.88

UNIT GW7002 GW8002 GW10002

RAD. S** N/A 3/16 x 1.75 N/A 1/4 x 2.88 N/A 1/4 x 3.00

BC BH C D E F FA G H Dia. I L M 12.96 16.90 18.91 7.59 7.000 5.50 10.63 2.75 N/A N/A 6.76 2.38 13.94 18.19 20.96 8.86 8.000 6.50 11.93 3.25 N/A N/A 9.57 3.47 17.05 22.30 25.47 10.36 10.000 6.88 14.34 3.44 N/A N/A 10.88 3.38

T-max* T-kwy*** U Dia. V Dia. X Y Z 3.938 1 x 1/2 .875 4.92 3.250 3.50 9.38 4.438 1 x 1/2 1.250 5.55 4.250 4.44 11.38 5.438 1-1/4 x 5/8 1.250 6.67 5.250 5.12 14.00

*T dimensions are for max. bore diameter. For other bore diameters refer to catalog page 10. **keyway width by length ***keyway width by depth

8

CALL: (605) 225-0360

FAX: (605) 225-0567


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW7004, GW8004, GW10004 Coupling Type C-Flange Adapter must be ordered separately - see page 13. (NEMA MOTORS ONLY) N PRIMARY UNIT BC AK DIA.

SECONDARY UNIT

BE1

BD DIA.

BE

OD DIA.

FA

N

LQ LQ1 RQ

BE BE1 U DIA.

BORE DIA.

I R

X P

Y

E

USEABLE

T DIA.

T DIA. BF, (4) EQ. SP. ON AJ BOLT CIRCLE

D

C S USEABLE

L LM1 LM

O*

P

USEABLE

O

K

J B

H (8) TAPPED HOLES (4) TOP & (4) BOTTOM

F A

BJ

G

Standard Styles Available

RA

LB NOT AVAILABLE

UL

LA UR RB

UNIT A B BC BJ C D E F FA G GW7004 7.63 14.88 12.96 24.33 20.46 7.59 7.000 5.50 10.63 2.75 GW8004 8.63 17.00 13.94 26.69 23.79 8.86 8.000 6.50 11.93 3.25 GW10004 9.53 20.88 17.05 32.74 29.24 10.36 10.000 6.88 14.34 3.44 UNIT O* P** R S** GW7004 5.69 5/8 x 4.00 4.33 3/16 x 1.75 GW8004 6.02 3/4 x 4.50 4.11 1/4 x 2.88 GW10004 6.80 7/8 x 5.00 5.12 1/4 x 3.00

T Dia. 2.750 3.000 3.750

LR

L NOT AVAILABLE STYLE UR-LR

U Dia. X Y Z .875 3.250 3.50 9.38 1.250 4.250 4.44 11.38 1.250 5.250 5.12 14.00

H H Depth I J K L 1-8 1.56 N/A 12.50 6.25 6.76 1-8 1.66 N/A 14.25 7.13 9.57 1 1/4-7 2.04 N/A 17.75 8.88 10.88

M N O 2.38 11.76 5.69 3.47 12.25 6.02 3.38 14.75 6.80

NEMA Motor Data NEMA Motor Mounting Dimensions Frame 56C 140TC 180TC 210TC 250TC

*applies to double output shaft **keyway width by length

R

AJ 5.88 5.88 7.25 7.25 7.25

AK 4.50 4.50 8.50 8.50 8.50

BD OD BE 5.88 6.64 .38 5.88 6.64 .38 9.00 N/A N/A 9.00 N/A N/A 9.00 N/A N/A

BE1 N/A N/A .50 .50 .50

BORE .625 .875 1.125 1.375 1.625

KWY.** 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16

BF .41 .41 .53 .53 .53

**keyway width by depth Note: All dimensions listed are for reference only. Contact factory for certified dimensions.

NEMA Motor Flange Face Locations

WARNING

For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

EMAIL: sales@hubcityinc.com

UNIT

56C/140TC 180TC LM RQ LQ LM1 RQ LQ1

LM1

GW7004 9.01 5.51 5.88 10.01 5.81 6.31 10.01 GW8004 11.81 6.04 6.45 12.90 6.68 7.21 12.90 GW10004 13.21 7.35 7.85 14.30 7.98 8.61 14.30

210TC RQ LQ1 6.25 6.68 7.98

LM1

250TC RQ LQ1

6.75 N/A N/A 7.21 13.46 7.24 8.61 14.86 8.54

WEB: www.hubcityinc.com

N/A 7.77 9.17

9


HUB CITY GW WORM GEAR DRIVES

Dimensions Model GW7005, GW8005, GW10005 RAD.

H DIA.

LQ LQ1 RQ

BC

AK DIA. I

(NEMA MOTORS ONLY) AF

PRIMARY UNIT

SECONDARY UNIT

FA

Coupling Type C-Flange Adapter must be ordered separately - see page 13.

BE BE1

DOTTED OUTLINES INDICATE OPTIONAL MOUNTINGS

BE1 BE

BD DIA. OD DIA.

U DIA.

BORE DIA. AA X Y

E

BF, (4) EQ. SP. ON AJ BOLT CIRCLE AB

C

S

USEABLE

V DIA.

LM1 LM

D

L

T DIA. G

3 SETSCREWS EACH END 120 APART B

AC

F

AE2

AD AG

AC

AE1

Standard Styles Available

RA

UNIT GW7005 GW8005 GW10005

UNIT GW7005 GW8005 GW10005

AA N/A N/A N/A

AB N/A N/A N/A

LB NOT AVAILABLE

AC AD AE1 AE2 1.06 11.36 1.09 1.09 1.06 12.48 1.03 1.03 1.33 15.78 1.39 1.39

RAD. S** T-max* T-kwy*** N/A 3/16 x 1.75 3.938 1 x 1/2 N/A 1/4 x 2.88 4.438 1 x 1/2 N/A 1/4 x 3.00 5.438 1-1/4 x 5/8

UL

LA

NOT AVAILABLE STYLE UR

UR

RB

AF AG B BC N/A 13.50 14.88 12.96 N/A 14.50 17.00 13.94 N/A 18.50 20.88 17.05

BH C D E F FA G H Dia. I L M 16.90 18.91 7.59 7.000 5.50 10.63 2.75 N/A N/A 6.76 2.38 18.19 20.96 8.86 8.000 6.50 11.93 3.25 N/A N/A 9.57 3.47 22.30 25.47 10.36 10.000 6.88 14.34 3.44 N/A N/A 10.88 3.38

U Dia. V Dia. X Y Z .875 4.92 3.250 3.50 9.38 1.250 5.55 4.250 4.44 11.38 1.250 6.67 5.250 5.12 14.00

*T dimensions are for max. bore diameter. For other bore diameters refer to catalog page 12. **keyway width by length ***keyway width by depth

ONLY ONE SECONDARY STYLE AVAILABLE. ORDER BY PRIMARY STYLE ONLY.

NEMA Motor Data NEMA Motor Mounting Dimensions Frame 56C 140TC 180TC 210TC 250TC

AJ 5.88 5.88 7.25 7.25 7.25

AK 4.50 4.50 8.50 8.50 8.50

BD OD BE 5.88 6.64 .38 5.88 6.64 .38 9.00 N/A N/A 9.00 N/A N/A 9.00 N/A N/A

BE1 N/A N/A .50 .50 .50

BORE .625 .875 1.125 1.375 1.625

KWY.** 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16

BF .41 .41 .53 .53 .53

**keyway width by depth Note: All dimensions listed are for reference only. Contact factory for certified dimensions. WARNING For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

10

CALL: (605) 225-0360

NEMA Motor Flange Face Locations UNIT GW7005 GW8005 GW10005

56C/140TC LM RQ LQ

LM1

180TC 210TC RQ LQ1 LM1 RQ LQ1

9.01 5.51 5.88 10.01 5.81 11.81 6.04 6.45 12.90 6.68 13.21 7.35 7.85 14.30 7.98

6.31 10.01 6.25 7.21 12.90 6.68 8.61 14.30 7.98

LM1

6.75 N/A 7.21 13.46 8.61 14.86

250TC RQ LQ1 N/A 7.24 8.54

FAX: (605) 225-0567

N/A 7.77 9.17


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW7007, GW8007, GW10007 FA

SECONDARY UNIT BH PRIMARY UNIT BC

I

M S

E

L

USEABLE

AM

U DIA. X Z Y

D

K

V

N

FH H DIA. (4) HOLES

AC

AD TAP

AC P

VIEW "A-A" A

A

J

B

F

O

USEABLE

T DIA.

A

Standard Styles Available NOTE: STYLES DL-L AND DR-R ARE NOT AVAILABLE DUE TO INTERFERENCE BETWEEN PRIMARY UNIT AND SECONDARY UNIT SIDE MOUNT FLANGE.

RA

DR LB UL

LA UR RB

DL

L

R

STYLE UR-L Note: The input shaft may be rotated in either direction. Units are for mounting as shown. Contact factory for other mountings. Assembly positions also apply to motor flange units.

UNIT A AC AD GW7007 22.00 1.000 .38-16 UNC X 1.00 DP GW8007 28.00 1.062 .62-11 UNC X 1.50 DP GW10007 32.00 1.188 .62-11 UNC X 1.50 DP UNIT N O P** S** GW7007 24.00 7.63 3/4 X 6.44 3/16 x 1.75 GW8007 27.06 9.25 7/8 X 8.00 1/4 x 2.88 GW10007 29.50 9.43 1 X 7.75 1/4 x 3.00

AM B BC BH D E F 6.06 22.00 12.96 16.90 8.50 7.000 19.00 6.22 28.00 13.94 18.19 10.00 8.000 24.00 7.94 32.00 17.05 22.30 12.50 10.000 28.00 T Dia. 2.937 3.438 3.938

FA 10.63 11.93 14.34

FH 10.75 13.75 17.00

H Dia. I 1.13 N/A 1.31 N/A 1.31 N/A

J K L M 19.00 29.88 6.76 2.38 24.00 34.00 9.57 3.47 28.00 38.38 10.88 3.38

U Dia. V X Y Z .875 1.75 3.250 3.50 9.38 1.250 2.00 4.250 4.44 11.38 1.250 2.25 5.250 5.12 14.00

*applies to double output shaft **keyway width by length

EMAIL: sales@hubcityinc.com

WEB: www.hubcityinc.com

11


HUB CITY GW WORM GEAR DRIVES

Dimensions Models GW7008, GW8007, GW10007 AK DIA. SECONDARY UNIT

FA I

BE1 BE

PRIMARY UNIT BD DIA. OD DIA. BORE DIA.

BC

Coupling Type C-Flange Adapter must be ordered separately - see page 13.

LQ LQ1 RQ E

BE BE1 U DIA.

AM X Y BF, (4) EQ. SP. ON AJ BOLT CIRCLE

D S

USEABLE

V H DIA. (4) HOLES

A

AD TAP

A

AC

A

O

P

J

VIEW "A-A"

F

L

USEABLE

T DIA.

AC

LM1 LM

N

FH

B

Standard Styles Available NOTE: STYLES LA-L, LB-L, RA-R AND RB-R ARE NOT AVAILABLE DUE TO INTERFERENCE BETWEEN PRIMARY UNIT C-FLANGE AND SECONDARY UNIT SIDE MOUNT FLANGE.

RA

NOT LB AVAILABLE

UNIT A AC AD GW7008 22.00 1.000 .38-16 UNC X 1.00 DP GW8008 28.00 1.062 .62-11 UNC X 1.50 DP GW10008 32.00 1.188 .62-11 UNC X 1.50 DP UNIT N O P** S** GW7008 24.00 7.63 3/4 X 6.44 3/16 x 1.75 GW8008 27.06 9.25 7/8 X 8.00 1/4 x 2.88 GW10008 29.50 9.43 1 X 7.75 1/4 x 3.00

UL

LA UR RB NOT AVAILABLE STYLE UR-L

R

L

AM B BC BH D E F FA FH 6.06 22.00 12.96 16.90 8.50 7.000 19.00 10.63 10.75 6.22 28.00 13.94 18.19 10.00 8.000 24.00 11.93 13.75 7.94 32.00 17.05 22.30 12.50 10.000 28.00 14.34 17.00 T Dia. 2.937 3.438 3.938

*applies to double output shaft **keyway width by length

Note: All dimensions listed are for reference only. Contact factory for certified dimensions.

U Dia. V X Y Z .875 1.75 3.250 3.50 9.38 1.250 2.00 4.250 4.44 11.38 1.250 2.25 5.250 5.12 14.00

H Dia. I J K L M 1.13 N/A 19.00 29.88 6.76 2.38 1.31 N/A 24.00 34.00 9.57 3.47 1.31 N/A 28.00 38.38 10.88 3.38

NEMA Motor Data NEMA Motor Mounting Dimensions Frame 48CZ 56C 140TC 180TC 210TC 250TC

AJ 3.75 5.88 5.88 7.25 7.25 7.25

AK 3.00 4.50 4.50 8.50 8.50 8.50

BD OD BE BE1 3.88 4.36 .38 N/A 5.88 6.64 .38 N/A 5.88 6.64 .38 N/A 9.00 N/A N/A .50 9.00 N/A N/A .50 9.00 N/A N/A .50

BORE .500 .625 .875 1.125 1.375 1.625

KWY.** 1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16

BF .28 .41 .41 .53 .53 .53

**keyway width by depth

WARNING

For safety, purchaser or user should provide protective guards over shaft extensions and any couplings, sheaves and belts, sprockets and chains, etc., mounted thereon.

NEMA Motor Flange Face Locations 56C/140TC 180TC UNIT LM RQ LQ LM RQ GW7008 9.01 5.51 5.88 10.01 5.81 GW8008 11.81 6.04 6.45 12.90 6.68 GW10008 13.21 7.35 7.85 14.30 7.98

12

CALL: (605) 225-0360

LQ LM1 6.31 10.01 7.21 12.90 8.61 14.30

210TC RQ 6.25 6.68 7.98

LQ1 LM1 6.75 N/A 7.21 13.46 8.61 14.86

250TC RQ LQ1 N/A N/A 7.24 7.77 8.54 9.17

FAX: (605) 225-0567


HUB CITY GW WORM GEAR DRIVES

Accessories Horizontal Base Kits

Vertical Base Kits

SHIPPING UNIT SIZE KIT NUMBER WT (LBS) GW70 0279-00600 41 GW80 0279-00601 48 GW100 0279-00602 76

SHIPPING UNIT SIZE KIT NUMBER WT (LBS) GW70 0279-00603 71 GW80 0279-00604 78 GW100 0279-00605 156 I

S

O

USEABLE

L

O*

T DIA.

P

USEABLE

0*

D D V V

K J B

N

D1 O

G F A

H DIA. (4) HOLES

K

H DIA. (4) HOLES G

J B

F A

Dimensions

Dimensions UNIT GW70 GW80 GW100

A 13.38 13.5 16.88

B 15.38 17.37 21.14

D 9 10.5 12

F 11.25 11.5 14

UNIT GW70 GW80 GW100

H 1.13 1.13 1.44

J 13 14.75 17

K 6.5 7.38 8.5

V 1.42 1.65 1.65

G 5.63 5.75 7

C Flange Motor Mounting Kits

UNIT GW70 GW80 GW100

A 26.91 28.96 37.47

B 14.88 17 20.88

D 7 8 9

D1 N/A N/A N/A

UNIT GW70 GW80 GW100

F 23.99 25.5 30.75

G 13.87 14.38 17.76

H 1.13 1.13 1.44

J 12.5 14 17.75

UNIT GW70 GW80 GW100

K 6.25 7 8.88

N 11.76 12.25 14.75

O 5.69 6.02 6.8

V 0.75 0.75 1

Single Reduction UNIT SIZE GW70 GW80

FLANGE SIZE 180TC 210TC 250TC 210TC 250TC

KIT NUMBER 0279-00606 0279-00607 0279-00608 0279-00609 0279-00610

SHIPPING WT (LBS) 14 16 28 16 28

Double Reduction (fits primary unit) UNIT SIZE GW70D

GW80D & GW100D

FLANGE SIZE 56C 140TC 180TC 210TC 56C 140TC 180TC 210TC 250TC

KIT NUMBER 0279-00611 0279-00612 0279-00613 0279-00614 0279-00615 0279-00616 0279-00617 0279-00618 0279-00619

SHIPPING WT (LBS) 7 7 11 11 8 8 11 11 12

Hollow Output Shaft Bore Sizes Fract. Size

Decimal Equiv.

KWY*

2-7/16 2-1/2 2-11/16 2-15/16 3 3-3/16 3-7/16 3-15/16 4-3/16 4-7/16 4-15/16 5-7/16

2.438 2.500 2.688 2.938 3.000 3.188 3.438 3.938 4.188 4.438 4.938 5.438

5/8 x 5/16 5/8 x 5/16 5/8 x 5/16 3/4 x 3/8 3/4 x 3/8 3/4 x 3/8 7/8 x 7/16 1 x 1/2 1 x 1/2 1 x 1/2 1-1/4 x 5/8 1-1/4 x 5/8

GW GW 2700 2800

GW 21000

* * * * * * *

* * * *

* * * * *

*Dimensions refer to driven shaft. Note: Special bores are available upon request. Consult factory for information.

See unit pages for dimensions

EMAIL: sales@hubcityinc.com

WEB: www.hubcityinc.com

13


HUB CITY GW WORM GEAR DRIVES

Lubricant Capacities (Pts)

Engineering Data

Mounting Position GW70 Single Reduction Units Worm Over 35 Worm Under 32 3/4 Vertical Output 20 3/4 Vertical Input 36 1/2 Extended Bearing 40 Double Reduction Primary Unit Worm Over 4 1/2 Worm Under 6 3/4 Vertical Output 5 1/2 Vertical Input 5 3/4 Extended Bearing 8 Sec.Unit Worm Over 50 1/3

Approximate Shipping Weights (LBS) SINGLE REDUCTION GW701 399 GW702 399 GW707 560 GW801 582 GW802 582 GW807 780 GW1001 905 GW1002 905 GW1007 1180

DOUBLE REDUCTION MODELS GW7001 478 GW8005 728 GW7002 478 GW8007 920 GW7004 482 GW8008 930 GW7005 482 GW10001 1136 GW7007 643 GW10002 1136 GW7008 647 GW10004 1151 GW8001 718 GW10005 1151 GW8002 718 GW10007 1406 GW8004 728 GW10008 1431

GW80

GW100

48 51 1/4 28 3/4 50 63

72 80 40 75 102

7 9 1/2 8 8 12 71 1/2

11 3/4 19 15 1/2 15 1/2 17 107 1/4

Note: Units are shipped dry Recommended Lubricants are HUB CITY GL460 for normal conditions HUB CITY SYNTHETIC LUBRICANT Recommended for extreme conditions

Dimensional Comparison HUB CITY OLD to NEW STYLE L

FA FZ

N

I

N

M S

O

USEABLE

U DIA.

E

P

P

USEABLE

USEABLE

C

T DIA.

D

K

O*

T DIA.

G

H (8) TAPPED HOLES (4) TOP & (4) BOTTOM

J

F A

B

SERIES GW70 70 GW80 80

A 7.63 7.75 8.63 9

SERIES GW70 70 GW80 80

I N/A N/A N/A N/A

B 14.88 15.188 17 17.75 J 12.5 12.5 14.25 14.75

C 18.91 18.5 20.96 21.25 K 6.25 6.25 7.13 7.38

D 7.59 7.625 8.86 8.75

L 11.5 12 12.5 13.63

M 2.97 3.63 2.84 3.88

E 7 7 8 8

F 5.5 5.5 6.5 6.5

N 11.76 11.125 12.25 12.75

FA 11.37 11.5 12.52 13.094 O 5.65 5.44 5.98 6.25

FZ 0.35 -2.5 0.57 -2.5

P** 5/8 x 4.00 5/8 x 5.00 3/4 x 4.50 3/4 x 5.63

Extended Bearing Units

G 2.75 2.75 3.25 3.25

H 1-8 1-8 1-8 1-8

S** 3/8 x 2.87 3/8 x 3.13 1/2 x 2.81 1/2 x 3.38 L

H Depth 1.56 2 1.66 2

T Dia. 2.75 2.75 3 3.25

U Dia. 1.625 1.75 1.875 1.875

I

USEABLE

D

V N

FH

H DIA. (4) HOLES

P

B

SERIES GW70 70 GW80 80

A 22 22.25 28 24.25

B 22 22.25 28 24.25

D 8.5 10.25 10 11.25

F 19 19 24 21

FH 10.75 9.03 13.75 10.44

O

A

USEABLE

T DIA. J

H Dia. 1.13 1.06 1.31 1.31

A

A

J 19 19 24 21

N 24 25.75 27.06 27.31

O 7.63 7.625 9.25 8.3125

F

P** 3/4 X 6.44 3/4 X 6.69 7/8 X 8.00 7/8 X 7.63

T Dia. 2.937 2.937 3.438 3.438

V 1.75 1.5 2 1.75

** Keyway width by length

14

CALL: (605) 225-0360

FAX: (605) 225-0567


IMPORTANT INFORMATION WARNING

CAUTION

Please Read Carefully

WARNING and CAUTION information is supplied to you for your protection and to provide The following you with many years of trouble free and safe operation of your HUB CITY product.

Read ALL instructions prior to operating reducer. Injury to personnel or reducer failure may be caused by improper installation, maintenance or operation.

WARNING

• Written authorization from HUB CITY is required to operate or use reducers in man lift or people moving devices. • Check to make certain application does not exceed the allowable load capacities published in the current catalog. • Buyer shall be solely responsible for determining the adequacy of the product for any and all uses to which Buyer shall apply the product. The application by Buyer shall not be subject to any implied warranty of fitness for a particular purpose. • For safety, Buyer or User should provide protective guards over all shaft extensions and any moving apparatus mounted thereon. The User is responsible for checking all applicable safety codes in his area and providing suitable guards. Failure to do so may result in bodily injury and/or damage to equipment. • Hot oil and reducers can cause severe burns. Use extreme care when removing lubrication plugs and vents. • Make certain that the power supply is disconnected before attempting to service or remove any components. Lock out the power supply and tag it to prevent unexpected application of power. • Reducers are not to be considered fail safe or self-locking devices. If these features are required, a properly sized, independent holding device should be utilized. Reducers should not be used as a brake. • Any brakes that are used in conjunction with a reducer must be sized or positioned in such a way so as to not subject the reducer to loads beyond the catalog rating. • Lifting supports including eyebolts are to be used for vertically lifting the gearbox only and no other associated attachments or motors. • Use of an oil with an EP additive on units with backstops may prevent proper operation of the backstop. Injury to personnel, damage to the reducer or other equipment may result. • Overhung loads subject shaft bearings and shafts to stress which may cause premature bearing failure and/or shaft breakage from bending fatigue, if not sized properly.

CAUTION

• Test run unit to verify operation. If the unit tested is a prototype, that unit must be of current production. • If the speed reducer cannot be located in a clear and dry area with access to adequate cooling air supply, then precautions must be taken to avoid the ingestion of contaminants such as water and the reduction in cooling ability due to exterior contaminants. • Mounting bolts should be routinely checked to ensure that the unit is firmly anchored for proper operation.

In the event of the resale of any of the goods, in whatever form, Resellers/Buyers will include the following language in a conspicuous place and in a conspicuous manner in a written agreement covering such sale: The manufacturer makes no warranties or representations, express or implied, by operation of law or otherwise, as to the merchantability or fitness for a particular purpose of the goods sold hereunder. Buyer acknowledges that it alone has determined that the goods purchased hereunder will suitably meet the requirements of their intended use. In no event will the manufacturer be liable for consequential, incidental or other damages. Resellers/Buyers agree to also include this entire document including the warnings and cautions above in a conspicuous place and in a conspicuous manner in writing to instruct users on the safe usage of the product. This information should be read together with all other printed information supplied by HUB CITY.

EMAIL: sales@hubcityinc.com

WEB: www.hubcityinc.com

15


TERMS AND CONDITIONS OF SALES QUOTATIONS ARE MADE AND ORDERS ARE ACCEPTED BY SELLER SUBJECT ONLY TO THESE TERMS AND CONDITIONS: 1. AGREEMENT AND MODIFICATION OF SALES TERMS. The agreement between Seller and Buyer (“Sales Contract”) is with respect to the sale of goods described on the other side hereof (the “goods”). Any Terms and Conditions contained in any purchase order or other form of communication from Seller's customers which are additional to or different from these Terms and Conditions shall be deemed rejected by Seller unless expressly accepted in writing by Seller. 2. ACCEPTANCE OF ORDERS. Acceptance by Seller of Buyer’s purchase order(s) is expressly conditioned upon Buyer’s assent to these Terms and Conditions. Buyer will be deemed to have assented to such Terms and Conditions unless Seller receives written notice of any objections within 10 days after Buyer's receipt of this form or in all events prior to any delivery or other performance by Seller of Buyer's order if less than 10 days. 3. QUOTATIONS. Quotations by Seller shall be deemed to be offers by Seller to sell the goods described therein subject to these Terms and Conditions, and acceptance of such offers is expressly limited to acceptance by Buyer of all of these Terms and Conditions within 30 days from the date of the quotation or as specified. Purchase orders submitted by Buyer for the goods quoted by Seller shall be subject to and will be deemed to constitute acceptance of these Terms and Conditions. All purchase orders will be subject to approval by Seller. 4. TERMINATION OR MODIFICATION. The Sales Contract may be modified or terminated only upon Seller’s express written consent, which consent will at all times be conditioned on Buyer’s agreement to pay Seller’s modification or termination charge including, but not limited to expenses and costs plus a reasonable profit, except that any goods completed on or before Seller’s acceptance of termination shall be accepted and paid in full by Buyer. 5. PRICES AND TERMS. Fulfillment of Buyer’s order is contingent upon the availability of materials. The price of the goods sold pursuant to the Sales Contract shall be based upon Seller's prices in effect at the time of shipment and any acceptance of the order will be on the basis of the freight rates now in effect. In the event of an increase or decrease in the applicable freight charges before the material is shipped, such changes in freight charges will be for the account of Buyer. Price advances, discounts, extras and terms and conditions are subject to changes without notice. Unless otherwise provided on the front side hereof, price is F.O.B. Seller’s point of shipment, and terms of payment shall be net 30 days from date of invoice. Seller may assess a delinquency charge of 1-1/2 percent per month on invoices not paid within stated payment terms. Seller may require full or partial payment or payment guarantees in advance of shipment whenever, in its opinion, the financial condition of Buyer so warrants. In addition, Seller may, at any time, suspend performance of any order or require payment in cash, security or other adequate assurance satisfactory to Seller when, in Seller’s opinion, the financial condition of Buyer warrants such action. 6. TAXES. Prices do not include sales, use or other similar federal, state or local taxes. Buyer shall pay to Seller, in addition to the price of the goods, all applicable taxes which may be invoiced separately at a later date. 7. DESIGN; EXTRA WORK; BUYER'S MATERIAL. (a) If any order accepted by Seller contemplates the preparation of special designs by Seller, Buyer issuing such order will have a responsible representative specifically approve all designs prepared by Seller. (b) If Buyer requests extra work not included in the quotation or original order, Buyer will pay for the extra work at reasonable rates as determined by Seller. (c) In the event spoilage/damage occurs on orders where Buyer furnishes the material, Seller shall not be liable for replacement of or damage to such material. 8. RISK OF LOSS, TITLE, SECURITY INTEREST. Delivery shall occur, and risk of loss shall pass to Buyer, upon delivery of the material to a carrier at the F.O.B. point of shipment. Transportation shall be at Buyer's sole risk and expense, and any claims for losses or damage in transit shall be against the carrier only. However, Seller retains title to all products until paid for in full in cash and Buyer agrees to perform all acts necessary to provide a fully perfected security interest in the goods in favor of Seller. Seller may, at Seller’s option, repossess the same, upon Buyer's default in payment hereunder, and charge Buyer with any deficiency. 9. DELIVERIES AND QUANTITIES. (a) Delivery dates are not guaranteed but are estimated on the basis of immediate receipt by Seller of all information to be furnished by Buyer and the absence of delay, direct or indirect, resulting from or contributed to by circumstances beyond Seller's reasonable control. If the goods are non-catalog goods, Seller may ship overages or underages to the extent of 10 percent of quantity ordered, and Buyer shall pay for such quantity based upon the unit price of the goods. Seller shall not be required to maintain closer control of quantity, unless specifically agreed to by Seller in writing. Quantities of all items may be determined by weight. Any claims for shortage must be within 10 days from the date of receipt of the goods by Buyer, and in every case the weights found in any particular shipment, including tare, must be given and Seller advised as to the method used by Buyer in computing the count of parts. (b) In the event that Buyer is unable to accept delivery of the goods at time of shipment, Seller shall invoice Buyer for the full purchase price as if shipment had been made and: (i) if Seller is able to store such goods in its own facilities, Buyer will pay Seller the reasonable handling and storage charges for the period of such storage, and (ii) if Seller is unable to store such goods at its own facility, Seller reserves the right to arrange handling and storage in a suitable bonded warehouse for the Buyer at Buyer's expense. In cases where handling and storage become necessary, it shall be Buyer's responsibility to notify Seller when shipment is to be made. Seller will make necessary arrangements for shipment at Buyer’s expense. 10. RETURNED GOODS. Goods may not be returned. However, if Seller consents in writing or upon verbal authorization to the return of goods for any reason, transportation charges must be prepaid by Buyer, who also shall assume all risk of loss of such returned goods until actual receipt by Seller. 11. INSPECTION, ACCEPTANCE. Buyer shall inspect the goods immediately upon the receipt thereof. All claims by Buyer (including claims for shortages), except only those provided for under the WARRANTY AND LIMITATIONS OF LIABILITY and PATENTS clauses below, must be asserted in writing by Buyer within a 10 day period or they are waived. If this contract involves partial performances, all such claims must be asserted within a 10 day period for each partial performance. Rejection may be only for defects substantially impairing the value of products or work. Buyer’s remedy for lesser defects shall be those provided for under the Warranty and Liability clauses. THERE SHALL BE NO REVOCATION OF ACCEPTANCE. If Buyer wrongfully rejects, revokes or delays acceptance of items or work tendered under this contract, or fails to make a payment due on or before delivery, or repudiates this contract, Seller shall, at its option, have a right to recover as damages, either the price as stated herein (upon recovery of the price, the items involved shall become the property of the Buyer) or the profit (including reasonable overhead) which the Seller would make from performance together with incidental damages and reasonable cost. 12. WARRANTIES AND LIMITATIONS OF LIABILITY. (a) Seller warrants to Buyer that the goods will conform to the following warranty: The goods will be commercially free from defects in material and workmanship under normal use for a period of 1 year from the date of shipment of the goods by Seller and will conform at the date of shipment to applicable specifications, drawings and blueprints, except for departures therefrom with written approval of Buyer; provided that work performed by Seller upon blanks and other materials furnished by Buyer is excluded from this warranty. Seller shall have no liability to Buyer for cost of blanks furnished by Buyer which are damaged or spoiled during heat treat or machining operations; (b) In the case of drives, gears and reducers manufactured by Seller, Seller warrants only that such products, when shipped, shall be capable of delivering the service rating as indicated in Seller’s written documents, including quotations and catalogs or as noted on such products, providing such equipment is properly installed and maintained, correctly lubricated, operating under normal conditions with competent supervision, and within the load limits for which it was sold, and provided further that the equipment is free from critical speed, tortional or other type vibration, no matter how induced; (c) If any model or sample was provided to the Buyer, it was used merely to illustrate the general type and quality of goods and not to warrant that goods shipped would be of that type or quality; (d) UNLESS AUTHORIZED IN WRITING BY A CORPORATE OFFICER OR VICE PRESIDENT, NO AGENT, EMPLOYEE OR REPRESENTATIVE OF SELLER HAS ANY AUTHORITY TO BIND SELLER TO ANY AFFIRMATION, REPRESENTATION OR WARRANTY CONCERNING THE GOODS SOLD UNDER THE SALES CONTRACT AND ANY SUCH AFFIRMATION, REPRESENTATION OR WARRANTY HAS NOT FORMED A PART OF THE BASIS OF THE BARGAIN AND SHALL BE UNENFORCEABLE; (e) Seller’s sole obligation under the foregoing warranties is limited to either, at Seller’s option, replacing or repairing defective goods (or defective parts thereof). This warranty does not cover the cost of installation of the new or repaired goods or parts. Replacement goods or parts are warranted for the remainder of the warranty period applicable to the goods originally supplied by Seller. All claims for allegedly defective goods must be made within 10 days after Buyer learns of such alleged defects. All claims not made in writing and received by Seller within such 10 day period shall be deemed waived. Buyer shall return a sample of the alleged defective

part for Seller's inspection, and no other goods shall be returned to Seller without Seller’s written consent. This warranty shall not extend to goods subjected to misuse, abuse, neglect, accident or improper installation or maintenance, incorrect lubrication, or goods which have been altered or repaired by anyone other than Seller or its authorized representative; (f) THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY OTHER TYPE, WHETHER EXPRESS OR IMPLIED; (g) Products not manufactured and work not performed by Seller are warranted only to the extent and in the manner that the same are warranted to Seller by Seller's vendors, and then only to the extent that Seller is reasonably able to enforce such warranty. In enforcing such warranty, it is understood Seller shall have no obligation to initiate litigation unless Buyer undertakes to pay all costs and expenses therefor, including but not limited to Attorney’s fees, and indemnifies Seller against any liability to Seller's vendors arising out of such litigation; (h) THE FOREGOING IS SELLER’S ONLY OBLIGATION AND BUYER’S EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. BUYER’S FAILURE TO SUBMIT A CLAIM AS PROVIDED ABOVE SHALL SPECIFICALLY WAIVE ALL CLAIMS FOR DAMAGES OR OTHER RELIEF INCLUDING BUT NOT LIMITED TO CLAIMS BASED ON LATENT DEFECTS. IN NO EVENT SHALL BUYER BE ENTITLED TO INCIDENTAL, CONSEQUENTIAL, CONTINGENT, OR SPECIAL DAMAGES, NOR SHALL SELLER’S LIABILITY EXCEED THE PURCHASE PRICE OF THE GOODS. EVEN IF THE REPAIR OR REPLACEMENT REMEDY SHALL BE DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE UNDER SECTION 2-719 OF THE UNIFORM COMMERCIAL CODE, SELLER SHALL HAVE NO LIABILITY TO BUYER FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SUCH AS LOST PROFITS, LOST REVENUE, DAMAGE TO OTHER EQUIPMENT OR LIABILITY OR INJURY TO A THIRD PARTY. ANY ACTION ARISING HEREUNDER OR RELATED HERETO MUST BE COMMENCED WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION OCCURS OR IT SHALL BE BARRED, NOTWITHSTANDING ANY STATUTORY PERIOD OF LIMITATIONS TO THE CONTRARY; and (i) In the event of the resale of any of the goods, in whatever form, Buyer will include the following language in a conspicuous place and in a conspicuous manner in a written agreement covering such resale: “THE MANUFACTURER MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS SOLD HEREUNDER. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS PURCHASED HEREUNDER WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. IN NO EVENT WILL MANUFACTURER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES.” (j) Nuclear Use Disclaimer - Equipment sold by Seller is not intended for use in connection with any nuclear facility or activity. If so used, Seller disclaims all liability for any nuclear damage, injury or contamination, and Buyer shall indemnify and hold Seller, its officers, agents, employees, successors, assigns and customers harmless from and against any and all losses, damages or expenses of whatever form or nature (including attorneys’ fees and other costs of defending any action) which they or any of them may sustain or incur, whether as a result of breach of contract, warranty, tort (including negligence) or otherwise, by reason of such use. 13. REMEDIES AND LIMITATIONS OF LIABILITY. In the event Buyer claims Seller has breached any of its obligations under the Sales Contract, whether of warranty or otherwise, Seller may request the return of goods and tender to Buyer, at Seller's option, a replacement shipment of goods. If Seller so requests the return of the goods, the goods will be redelivered to Seller in accordance with Seller’s instructions and at Buyer’s expense. Except as herein provided, Seller shall have no further obligation under the Sales Contract. The remedies contained in this paragraph and paragraph 12 hereof shall constitute the sole recourse of Buyer against Seller for breach of any of Seller’s obligations under the Sales Contract, whether warranty or otherwise. 14. TECHNICAL ADVICE. Any technical advice furnished or recommendation made by Seller or any representative of Seller concerning any use or application of any of the goods is believed to be reliable, but SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED, ON RESULTS TO BE OBTAINED. BUYER ASSUMES ALL RESPONSIBILITY FOR LOSS OR DAMAGE RESULTING FROM THE HANDLING OR USE OF ANY OF THE GOODS. 15. FORCE MAJEURE. Seller shall not be liable for failure to perform its obligations under the Sales Contract in whole or in part caused by the occurrence of any contingencies beyond the reasonable control either of Seller or of suppliers of Seller. If any such contingency occurs, Seller may allocate goods and deliveries among Seller's customers. 16. ASSIGNMENT AND DELEGATION. No right or interest in the Sales Contract shall be assigned by Buyer without Seller’s prior written consent, and no delegation of any obligation owed, or to the performance of any obligation by Buyer shall be made without Seller’s prior written consent. Any attempt at assignment or delegation shall be wholly void and totally ineffective for all purposes unless made in conformity with this paragraph. 17. PATTERNS AND TOOLING. Unless otherwise agreed to in writing with Buyer, Seller shall retain title to and possession of all special tooling, patterns and dies whether paid for by Buyer or not, but such special tooling, patterns and dies that are specifically paid for by Buyer will be held by Seller exclusively for the manufacture of Buyer's goods for not more than 2 years after the date of Buyer's last order requiring their use. Seller will exercise reasonable care in handling and storing any tooling, patterns or dies specifically paid for by Buyer, but Seller shall not be liable for damage or loss thereof. 18. PATENTS. SELLER MAKES NO REPRESENTATION OR WARRANTY WITH RESPECT TO THE PATENTABILITY OF THE GOODS OR THAT ANY OF THE GOODS WILL BE FREE FROM CLAIMS OF INFRINGEMENT. Buyer agrees to indemnify and defend Seller in any such suit, action or proceeding for any claim resulting from actual or alleged infringement of any domestic or foreign letters patent for (i) any feature, construction or design incorporated at Buyer’s request in any goods or to adapt such goods to the particular use of Buyer or Buyer's customers or (ii) any additions, changes or adaptations made by Buyer or Buyer's customers after delivery of the goods. 19. CONFIDENTIAL INFORMATION. All drawings, diagrams, specifications, technical data and other materials furnished by Seller and identified by Seller as confidential are and shall remain the exclusive property of Seller and shall be returned to Seller upon request. Buyer agrees to treat such information and material as confidential and not to reproduce or disclose such information or materials without Seller’s prior written consent. This paragraph does not apply to any information already known to and readily accessible in the trade or which may become so through no fault of Buyer. 20. CHANGES. Seller may, at any time, without notice, make changes (whether in design, material, improvements or otherwise) in any catalog goods, and may discontinue the manufacture of any catalog goods, all in its sole discretion, without incurring any obligations of any kind as a result thereof, whether for failure to fill an order of Buyer or otherwise. 21. INSTALLATION. Installation of the goods shall be by Buyer unless otherwise specifically stated in the Sales Contract. 22. SEVERABILITY. If any term or provision contained in the Sales Contract is declared or held invalid by a court of competent jurisdiction, such declaration or holding shall not affect the validity of any other term, clause or provision contained herein. 23. GOVERNING LAW AND LIMITATION. (a) The formation and performance of the Sales Contract shall be deemed to have been made and governed by the Uniform Commercial Code as adopted in the state of Seller's principal place of business; (b) Buyer hereby agrees to the jurisdiction of any state or federal court located in the county of Seller's principal place of business. Buyer waives any objection based on forum non conveniens and any objection to venue of any action instituted hereunder, and consents to the granting of such legal or equitable relief as is deemed appropriate by a court of competent jurisdiction. The rights and obligations of Seller and Buyer shall not be governed by the provisions of the United Nations Convention on Contracts for the International Sale of Goods; and (c) Seller represents that the goods will be produced in compliance with the Fair Labor Standards Act of 1938, as amended. (d) BUYER AGREES TO PAY ALL OF SELLER’S COSTS AND EXPENSES OF COLLECTION AND LITIGATION, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ FEES AND COSTS. Revised May, 2007


F G

M H

www.hubcityinc.com D MIN.

D MAX. B

Does your application require CAD drawings? How about a configurator to aid your gear drive selection? Log on to www.hubcityinc.com where you may access our catalog tool for configurating and selecting a gear drive or mounted bearing. Then download our Fast Draft DXF drawings, browse through the standard and custom product overviews, read what’s new at the “HUB,” and order product literature. Download all of our product literature in an easy to use PDF format. If a custom gear drive is what your are looking for, there are several examples of HUB CITY’s custom capabilities featured here.

SOLUTION DRIVEN

Do you need to speak to a HUB CITY field salesperson? Contact information is located on the site, as well as a HUB CITY Authorized Distributor directory searchable by zip code.

CUSTOMER SERVICE CATALOG TOOLS CONFIGURATOR CAD DRAWINGS

CUSTOM PRODUCTS STANDARD PRODUCTS LOCATE DISTRIBUTORS

FIELD SALES OFFICES

support • service • solutions

Find the HUB CITY field salesperson nearest you.


Hub City West 1110 North Anaheim Blvd. Anaheim, CA 92801 (714) 776-1992

Hub City Midwest 6450 West Hanna Avenue Indianapolis, IN 46241 (317) 856-4855

Hub City Southeast 135 Cecil Court Fayetteville, GA 30214 (770) 461-8334

Hub City Headquarters 2914 Industrial Avenue Aberdeen, SD 57402 (605) 225-0360

Hub City Southwest 3251 Royalty Row Irving, TX 75062 (972) 721-0080

Hub City Northeast 6520 Stonegate Drive Allentown, PA 18106 (610) 391-9298

Hub City East 1011 Van Buren Avenue Indian Trail, NC 28079 (704) 847-9131

Hub City Canada 557 Fenmar Drive Toronto, ON M9L 2R6 (416) 743-8922

“At The Heart Of What Drives Your World” 2914 Industrial Avenue • P.O. Box 1089 • Aberdeen, SD 57402 Phone: (605) 225-0360 • Fax: (605) 225-0567 Email: sales@hubcityinc.com • www.hubcityinc.com Printed In The U.S.A.

5899H - SK/5-07/3.5K/WP

8603599040

HUB CITY Series cw worm gear drives (réducteur de vitesse)  

• Metal nameplate drive screwed to housing insures easy field identification for repair parts and replace- ment. • Rugged iron housings, cov...