Page 1

Silent Screen Submittal Package

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 1 of 14


Summary of Documents Submitted Section A:

Section A provides information about the EAS Silent Screen Panel System. Included in this section are the product specifications, acoustical performance overview, quality assurance, warranty information, product data sheets, etc.

Section B:

Section B provides information on the Color Coating Systems being used at EAS. The information includes an overview of the coating process, advantages of the paint systems, and cleaning and maintenance instructions.

Section C:

Section C provides information on the packaging of panels, instructions on receiving and storage of panels, material handling and installation of the panels.

Section D:

Section D provides a brief overview on the durability and advantages of EAS products. As the specifications illustrate, the paint systems once applied allow the panel systems to offer exceptional resistance to chemical deterioration and abrasion and at the same time exhibit excellent weathering characteristics to most environments.

Appendices: 1. Acoustical Reports. 2. Mineral Rock Wool Specifications. 3. Typical Details.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 2 of 14


Section A: Noise Panel Systems (Empire Silent Screen Noise Abatement System) •

The EAS Silent Screen Panel System is engineered for acoustical enclosures and noise barriers where structural integrity, sound absorption and transmission loss are of major concern. Silent Screen panels are designed for both indoor and outdoor applications.

Acoustical Performance Standards 9 Has Noise reduction coefficient of 1.05 when measured in accordance with the requirements of ASTM C423. 9 Has STC = 35 when tested in accordance with the requirements of ASTM E90.

Silent Screen Panels 9 The panels are fabricated from 16 and 22 gauge cold-formed sheet steel. 9 The panels have a width of 12 inches and a thickness of 2¾ inches. 9 The panel face tray is made of 22 gauge perforated cold-formed steel and has 3/16 inch diameter perforations in a 3/8 inch staggered pattern. 9 The panel back tray is made of 16 gauge non-perforated cold-formed steel. 9 The panel back tray is filled with six pound density mineral rock wool. 9 Maximum panel length is 12’ before intermediate bracing is required. 9 Sound strikes the perforated side; most of it passes through the perforations and is absorbed by the acoustical material, while some is reflected back to the source of the noise. The remaining sound which is transmitted through the barrier is substantially reduced.

Material and Finishes 9 Silent Screen Panels shall be fabricated from 16 and 22 gauge cold-formed sheet steel. o Conforms to the structural quality and galvanized in accordance with ASTM A-653, Class G-90. o Melts above 2,750 Degrees Fahrenheit, has a flame spread of 15 or less and a smoke development of 0 when tested in accordance with ASTM Standard E-84, is rated incombustible by ASTM Standard E-136. 9 Finish: The panels will be galvanized and may be coil coated or painted with a powder coating paint system. EAS Standard Color Guide available on request. 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 3 of 14


9 Mineral Rock Wool (see attached data sheets) conforms to Federal Specifications HH-1-558B and ASTM Standard E-136 and has the following characteristics: o Has a density of 6 pounds per cubic foot. o Is non-hygroscopic and absorbs less than 1% water. o Melts above 2,000 Degrees Fahrenheit, has a flame spread of 15 or less and a smoke development of 0 when tested in accordance with ASTM Standard E-84, is rated incombustible by ASTM Standard E-136. 9 Quality Assurance o EAS products will conform to the required quality and performance standards. o EAS panels, trims, accessories shall be installed in accordance with the approved shop drawings to ensure the required quality standards. 9 Warranty o EAS shall warrant for a period of one year that the panels, trims and accessories furnished by the manufacturer shall be free from defects in materials and factory workmanship. o Paint finish warranties shall be the paint manufacturers standard for wall panels and trims.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 4 of 14


Section B: Color Coating Systems: Coil Coating Process: Under the first system; EAS uses coils that have been coil coated. Coil coating is a continuous and highly automated process for coating metal before fabrication. Please refer to the illustration of this process attached separately. The coil coating process involves: • • • • •

Uncoiling and Straightening of the coils Cleaning and Pre-treating (chemical treatment) both sides of the coils Application of prime coat and oven curing Application of top coat and oven curing again Recoiling for final shipment

The material is tested at various process points to ensure that paint specifications and specified quality parameters are met. The color coating system used is Akzo Nobel Coatings Inc’s TRINAR 2 Coat Color System. All TRINAR coatings are 70% formulations of Kynar 500 or Hylar 5000 polyvinylidine fluoride (PVDF) resin. Critical Performance Characteristics for Akzo Nobel Coatings Inc’s TRINAR 2 Coat Color System: Some of the performance characteristics in accordance with the ASTM test procedures are as follows: • • • • • •

Adhesion (per ASTM D 3359) 9 no loss of adhesion Flexibility (per ASTM D 4145) 9 1T to 3T; no loss of adhesion Hardness (per ASTM D 3363) 9 HB minimum Reverse Impact (per ASTM D2794) 9 3x metal thickness, no tape off Abrasion Resistance (per ASTM D 968) 9 65 +/- 10 liters per mil Specular Gloss (per ASTM D 523) 9 Less than 25 at 60º 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 5 of 14


• • • •

Salt Spray (per ASTM D 117) 9 1,000 hours – 1/16” max creep from scribe Humidity (per ASTM D 2247) 9 2,000 hours – no field blisters Florida Exposure (per ASTM G7) 9 25 years film integrity QUV Weatherometer (per ASTM G154 w/Bulb A 340) 9 3,000 hours – Chalk rating no less than 8

The complete product specifications and performance properties are available upon request. Advantages: •

• • • • • • •

Environmentally friendly. 9 For TRINAR coated coils, the coils are received color coated thereby eliminating the handling of powder. No solvents to handle. 9 For TRINAR coated coils, the coils are received color coated thereby eliminating the use of any solvents. Product is ready to apply, No adjustments needed. 9 See above. One coat application for textures and high film build products. Multiple color finishes in single coat applications. Large Volumes. 9 For TRINAR coated coils large volumes can be processed in shorter time spans. Flexibility. Good resistance to chipping and scratching. Excellent abrasion and chemical resistance.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 6 of 14


Powder Coating Process: Under the second system; EAS uses coils that are bare galvanized. The main difference between the two systems is; in the first system we take the color coated coils and process them to form the panels, whereas in the second system the panels are formed from the bare galvanized coils and then powder coated. The coating process involves: • • • •

Putting the panels (flashing material, etc.) through a wash system. Dry off stage for the wash system as parts need to be dry before powder coating. The panel parts are then run through the powder coating booth where they are color coated individually. The coated panel parts are then cured and baked in an oven for the specified time at appropriate temperature.

The material is tested at various process points to ensure that paint specifications and specified quality control parameters are met. The Sherwin Williams POWDURA® Powder Coating is used by EAS. This product line has excellent chemical resistance and durability and works well as an anti-graffiti product. The EAS Standard Color Guide is available on request. Critical Performance Characteristics for Sherwin Williams POWDURA® Powder Coatings: Some of the performance characteristics in accordance with the ASTM test procedures are as follows: • • • • •

Adhesion (per ASTM D 3359) 9 no failure with 1/16” squares Flexibility (per ASTM D 522) 9 Pass 1/8” Mandrel Bend Hardness (per ASTM D 3363) 9 2H Reverse Impact (per ASTM D2794) 9 140 Dir./140 Rev Specular Gloss (per ASTM D 523) 9 80+ at 60 degrees

The complete product specifications and performance properties are available upon request.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 7 of 14


Advantages: •

• • • • • •

Environmentally friendly 9 The powder is stored in sealed containers in cool and dry conditions. The powder in itself is environmentally friendly. No solvents to handle. 9 The powder is mixed in the gunning tank and does not require any solvents. Product is ready to apply, no adjustments needed. One coat application for textures and high film build products. Multiple color finishes in single coat applications. Good resistance to chipping and scratching. Excellent abrasion and chemical resistance.

Cleaning and Maintenance of Panel Systems: The panel systems made with both the TRINAR 2 coat system and the Powder Coating system, under regular working environment, has shown remarkable resistance to exterior chalking, fading, cracking and the effects of chemicals and ultraviolet rays. However, coil coated panels offer a relatively non-adherent, inert surface to undesirable materials. Removal of undesirable materials from the surface of coil coated, factory-finished bake enamels should always be limited to mild soapy water or mild cleaners, followed by a clean water rinse. However, it is recognized that occasionally problems occur, such as overspray from air-dry painting in the area, graffiti, or other incidental problems. Since these bake enamels are composed of resins and pigments which can be adversely affected by strong chemicals, extreme care should be exercised in any removal activities. It is very important that all cleaners and solvents, as listed below in Steps A through D, be first tested on a less visible area, to determine if there are any potentially negative effects from the cleaning process. Cleaning should not be attempted if there is any damage, such as abrasion, scuffing, dulling, burnishing, etc., done to the film in the test area. The following sequential procedures are suggested: A.) Unless the “condition” is clearly undesirable, it is often best to do nothing at all. This is often the case with light, unintentional overspray; it will probably be removed by the elements in a relatively short period of time. B.) If, however, removal is deemed necessary, first try washing with mild soapy water or a mild household cleaner such as Fantastic. Sometimes the use of a minimally abrasive Teflon-type pad gives just enough physical action to succeed. 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 8 of 14


Please note: Repeated rubbing with abrasive cleaners and/or pads is likely to result in a scuffed surface, which will not only be unsightly, but will also decrease the service life of the factory finish and void warranty coverage. C.) If Step B fails to address the problem in a satisfactory manner, a slightly more aggressive approach would be to wipe the surface with either mineral spirits or VM&P Naphtha. These solvents are often used in air drying. Mineral spirits evaporate slowly and will work best in warm weather on warm metal. VM&P Naphtha evaporates rapidly, and will work best in cool weather on cool metal. D.) If steps B and C have not produced satisfactory results, more aggressive aromatic solvents, such as xylene (“xylol” or “m-xylene”) or toluene (“toluol”) may be used very carefully, being sure to limit the amount of solvent to the minimum necessary, to only dampen a cloth and limit the time of exposure to 10-15 seconds or less on any given area. Xylene has a moderate evaporation rate and is best suited for warm metal in warm weather. Toluene evaporates faster, and is better suited for cool weather on cool metal. Note: Stronger solvents, such as any type of ketone, should never be used to clean factory finishes – damage to the coating is extremely likely to occur and will void any warranty coverage. E.) The longer that the factory applied, baked enamel surface has been in service, the more susceptible it will be to damage caused by any procedure intended to remove undesirable deposits from its surface. It is therefore important that all cleaners and solvents be first tested on a less visible area, to determine the potential side-effects of cleaning. Cleaning should not be undertaken if there is any damage, such as abrasion, scuffing, dulling, burnishing, etc., done to the film. Such damage automatically voids warranty coverage. Also, the older the original surface, the greater will be the likelihood that the “cleaned” area will result in a somewhat different appearance, due to the removal of dirt and natural degradation of materials from the cleaned area.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 9 of 14


Section C: Packing, Material Handling and Installation Packaging: EAS Silent Screen Panels are packaged and shipped flat on a wooden pallet. The maximum length of the panels is 12 ft and approx. 60 panels are packed on each pallet (depending on the length of the panel). The panels are placed on the pallet in 4 rows and then vertically stacked. Care is taken while stacking the panels so that there are no scratches on the panels. Additionally foam strips are placed between each of the panels at multiple locations to ensure that the panels do not rub against each other. The panels once stacked are shrink-wrapped and then bound by steel bands on all sides to ensure that the panels do not move. Computerized packing slips indicating the length of the panels, number of panels and other information are attached to the panels before shrink wrapping. These packing slips are visible to visual inspection. See Picture 1 for illustration.

Picture 1 – Pallet The panels are then moved to the loading dock where they are loaded onto trucks using a fork lift. See Picture 2 for illustration.

Picture 2 - Loading 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 10 of 14


The pallets are loaded on a flat bed truck side by side (in some cases a box truck may be used). The pallets are not loaded on top of each other as they might damage the panels on the lower pallet while in transport. See Pictures 3 and 4 for illustration.

Picture 3

Picture 4

The pallets, once loaded, are tarped with water resistant material to ensure that the panels reach the destination safely. See picture 5 for illustration.

Picture 5 Receiving: Upon arrival of the panels at the jobsite, the contractor is responsible for inspecting the shipment for damage, shortages etc. If damage or shortage is observed, a claim must be filed with the carrier at once, and the delivery documents must be noted. If there is concealed damage or shortage the carrier and the company must be notified immediately. Photographs of the damaged components in their original packages will be needed in submitting the claim. Claims must be submitted within 72 hours of delivery. 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 11 of 14


Unloading: We recommend using a fork lift for unloading the pallets from the truck. The maximum pallet weight is approximately 4,800 pounds. Storage: • As the panels will usually be installed within a few weeks of receipt, care should be taken to store them at convenient locations to minimize handling during erection. • The shrink wrapping should be removed only at the time of installation of the panels. • The pallets should be stored reasonably level, but slightly sloped to allow for drainage. • The pallets should not be stacked one over the other. • If the panels need to be stored for a longer period of time, they should be stored and protected in a covered, dry location that provides for good air circulation, is shielded from direct sun light and is free from the effects of corrosive environments. Material Handling: The panels should be carried on edge in a vertical position for stiffness. Care should be taken to avoid carrying them horizontally/flat as bending or warping may occur. Installing Panels: • Installation will be per the Approved plan set.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 12 of 14


Section D: Durability EAS wall systems are designed to minimize costs, are light weight, easy to install, aesthetically pleasing and designed to be virtually maintenance free over the expected lifetime of a typical installation. The panels are fabricated from galvanized (G-90) steel and may be coil coated or powder coated depending on the application. Further the design of the panels itself eliminates the use of fasteners thereby reducing any chance of rust setting in through the drilled holes for the fasteners. The powder coating of the panels extends the life of the panels thereby reducing the susceptibility to chemical deterioration and abrasion as well as minimizes the effects of weathering. As the panels are used for outdoor application over the lifetime of the installation one will see some weathering effects but these will not be significant. Similarly the structural posts used for installing the panels are galvanized and may be painted or powder coated depending on the customer requirement. This reduces the susceptibility of the structural posts to any chemical deterioration and abrasion. From the design perspective the noise walls are designed based on current AASHTO standards and are designed for wind speeds in excess of 140 mph depending upon the region and specified parameters.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 13 of 14


Appendices Attached herewith are the Silent Screen acoustical reports, Mineral Rock Wool specifications and our typical product details. These detail drawings are for general information and cover typical usage and installation, but may differ from more project-specific drawings.

1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empireacoustical.com ● Website: www.empireacoustical.com WORLDWIDE ACOUSTICAL PRODUCTS & SERVICES Page 14 of 14


NOTES:

2.

22 GA. STEEL (ASTM A653) PERFORATED FACE TRAY

MATERIAL USED: 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

PERFORATED

12"

NON-PERFORATED PERFORATED

FINISH: THE PRODUCTS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN 2 3/4" EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS 2" THICK MINERAL REQUIREMENT. COLOR ROCK WOOL SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

1/2" 4 1/2"

1/2" 4 1/2"

2"

12" 16 GA. STEEL (ASTM A653) SOLID BACK TRAY

SILENT SCREEN PANEL SECTION 2" = 1'-0" INTERLOCK DETAIL NO SCALE

22 GA. STEEL (ASTM A-653) PERFORATED FACE TRAY 16 GA. STEEL (ASTM A-653) SOLID BACK TRAY

DETAIL:

2 3/4"

2" THICK MINERAL ROCK WOOL INSULATION

SILENT SCREEN ISOMETRIC SECTION DRAWN BY: DATE:

12"

CJB 2011-01-04

SCALE:

PANEL ISOMETRIC 2" = 1'-0"

1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 1

\\M25-server\cad\EAS CAD\EAS Details\Silent Screen\EAS-SILENT SCREEN ISO SECTION.dwg, SILENT SCREEN ISO SECTION, 1/4/2011 4:55:54 PM

1.


I-BEAM POST, REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT SPECIFICATIONS AND DIMENSIONS.

2'-0" MIN. 4'-0" MAX. 2'-0" MIN. 4'-0" MAX. 2'-0" MIN. 4'-0" MAX.

SECTION "A"

TWO (2) WASHERS AND NUT. ALL PIECES ARE TO BE GALVANIZED. REFER TO ARCH'L / CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

B 1

3 3/4" MIN. TO C.L. OF BOLT

RETAINING ANGLE L2"x2"x3/16" MIN. REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT SPECIFICATIONS AND DIMENSIONS.

TOP OF SILENT SCREEN SUPPORT STRUCTURE

DETAIL:

SILENT SCREEN I-BEAM POST INSTALLATION DRAWN BY: DATE:

CJB 2010-12-22

SCALE:

A 1

PLAN VIEW

EAS SILENT SCREEN PANEL

1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN I-BEAM POST INSTALL.dwg, SILENT SCREEN I-BEAM POST INSTALL PAGE 1, 1/3/2011 8:10:17 AM

SECTION "B"

RETAINING ANGLE L2"x2"x3/16" MIN. REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT SPECIFICATIONS AND DIMENSIONS.

1'-0"

1'-0"

2'-0" MIN. 4'-0" MAX.

EAS SILENT SCREEN PANEL

REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT BEAM DIMENSIONS.

1'-0"

RETAINING ANGLE L2"x2"x3/16" MIN. REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT SPECIFICATIONS AND DIMENSIONS.


MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL. PANELS ARE 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

2.

FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123. THE PANELS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS REQUIREMENT. COLOR SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

2" MIN.

1.

2'-0" MIN. 4'-0" MAX.

2" MIN.

C 2

SECTION "C"

2'-0" MIN. 4'-0" MAX. 2'-0" MIN. 4'-0" MAX.

REFER TO ARCH'L / CIVIL / STRUCTURAL FOR EXACT ANGLE DIMENSIONS.

1'-0" MIN.

3/16" MIN.

L2"x2"x3/16" MINIMUM

DETAIL:

1'-0" MIN.

SILENT SCREEN I-BEAM POST INSTALLATION DRAWN BY: DATE:

RETAINING ANGLE DETAIL

SLOT OPENING,

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN I-BEAM POST INSTALL.dwg, SILENT SCREEN I-BEAM POST INSTALL PAGE 2, 1/3/2011 8:10:34 AM

NOTES:


PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

B 2

B 2

ELEVATION A 2

NOT TO SCALE

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

CAISSON DEPTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. DETAIL:

SILENT SCREEN PLATE MOUNTED DETAILS DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN PLATE MOUNTED.dwg, SILENT SCREEN PLATE MOUNTED pg 1, 1/3/2011 8:14:10 AM

SILENT SCREEN PANEL

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

A 2


STEEL PLATE CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

ANCHOR BOLTS, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SILENT SCREEN PANEL

SECTION B NOT TO SCALE

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

B 2

B 2

ANCHOR BOLTS, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SECTION A NOT TO SCALE

DETAIL:

SILENT SCREEN PLATE MOUNTED DETAILS

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN PLATE MOUNTED.dwg, SILENT SCREEN PLATE MOUNTED pg 2, 1/3/2011 8:13:53 AM

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

ION AT U IN

NT CO

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

CO

N

SILENT SCREEN PANEL

ION AT U TIN

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DETAIL:

ISOMETRIC

SILENT SCREEN PLATE MOUNTED DETAILS

NOT TO SCALE DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

3 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN PLATE MOUNTED.dwg, SILENT SCREEN PLATE MOUNTED pg 3, 1/3/2011 8:13:36 AM

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


A 2

C 2

C 2

B 2

B 2

SILENT SCREEN PANEL

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT DIMENSIONS.

ELEVATION NOT TO SCALE

NOTES: 1.

MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL. PANELS ARE 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

2.

FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123. THE PANELS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS REQUIREMENT. COLOR SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

DETAIL:

SILENT SCREEN JERSEY BARRIER BACK MOUNT DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER BACK MOUNT.dwg, SILENT SCREEN JERSEY BARRIER BACK MOUNT pg 1, 1/3/2011 8:12:03 AM

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT DIMENSIONS.

A 2

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT DIMENSIONS.

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT DIMENSIONS.

PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR FOR EXACT DIMENSIONS.


ANCHOR BOLTS (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SECTION B NOT TO SCALE

3"x3" CLIP ANGLE 3" LONG

C 2

C 2

B 2

B 2

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. ANCHOR BOLTS (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SECTION A NOT TO SCALE

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DETAIL:

SILENT SCREEN JERSEY BARRIER BACK MOUNT DRAWN BY: DATE:

SECTION C NOT TO SCALE

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER BACK MOUNT.dwg, SILENT SCREEN JERSEY BARRIER BACK MOUNT pg 2, 1/3/2011 8:11:47 AM

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


ION

NT CO

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SILENT SCREEN PANEL

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

N

TIO

N CO

UA TIN

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. DETAIL:

SILENT SCREEN JERSEY BARRIER BACK MOUNT DRAWN BY: DATE:

ISOMETRIC

CJB 2010-12-22

NOT TO SCALE SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

3 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER BACK MOUNT.dwg, SILENT SCREEN JERSEY BARRIER BACK MOUNT pg 3, 1/3/2011 8:11:30 AM

PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

AT INU


B 2

A 2

SILENT SCREEN PANEL

B 2

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

ELEVATION NOT TO SCALE

NOTES: 1.

MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL. PANELS ARE 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

2.

FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123. THE PANELS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS REQUIREMENT. COLOR SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

DETAIL:

SILENT SCREEN JERSEY BARRIER TOP MOUNT DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER TOP MOUNT.dwg, SILENT SCREEN JERSEY BARRIER TOP MOUNT pg 1, 1/3/2011 8:13:05 AM

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

A 2

C-C COLUMNS VARIES, REFER TO STRUCTURAL FOR EXACT DIMENSIONS

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

PANEL LENGTH VARIES, REFER TO STRUCTURAL FOR EXACT DIMENSIONS


WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL

ANCHOR BOLTS (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SILENT SCREEN PANEL

SECTION B NOT TO SCALE

B 2

B 2

SECTION A NOT TO SCALE

ANCHOR BOLTS (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DETAIL:

SILENT SCREEN JERSEY BARRIER TOP MOUNT DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER TOP MOUNT.dwg, SILENT SCREEN JERSEY BARRIER TOP MOUNT pg 2, 1/3/2011 8:12:49 AM

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

STEEL PLATE


ION

NT CO

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SILENT SCREEN PANEL

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

N

TIO

N CO

UA TIN

CONCRETE BARRIER (BY OTHERS), REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. DETAIL:

SILENT SCREEN JERSEY BARRIER TOP MOUNT ISOMETRIC

DRAWN BY: DATE:

NOT TO SCALE

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

3 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN JERSEY BARRIER TOP MOUNT.dwg, SILENT SCREEN JERSEY BARRIER TOP MOUNT pg 3, 1/3/2011 8:12:34 AM

PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

AT INU


PANEL LENGTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

C-C COLUMNS VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

B 2

A 2

B 2

ELEVATION NOT TO SCALE

WIDE FLANGE BEAM EMBEDDED IN CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

CAISSON DEPTH VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. NOTES: 1.

MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL. PANELS ARE 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

2.

FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123. THE PANELS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS REQUIREMENT. COLOR SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

DETAIL:

SILENT SCREEN POST EMBEDDED IN CAISSON DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN POST EMBED IN CAISSON.dwg, SILENT SCREEN POST EMBED IN CAISSON pg 1, 1/3/2011 8:16:07 AM

SILENT SCREEN PANEL

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

VARIES, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

A 2


WIDE FLANGE BEAM EMBEDDED IN CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SILENT SCREEN PANEL

SECTION B NOT TO SCALE

WIDE FLANGE BEAM REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. B 2

B 2

WIDE FLANGE BEAM EMBEDDED IN CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

SECTION A NOT TO SCALE

DETAIL:

SILENT SCREEN POST EMBEDDED IN CAISSON

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN POST EMBED IN CAISSON.dwg, SILENT SCREEN POST EMBED IN CAISSON pg 2, 1/3/2011 8:15:26 AM

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


ION AT U IN

WIDE FLANGE BEAM, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

C-C COLUMNS VARIES REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

CO

N

SILENT SCREEN PANEL

ION AT U TIN

CONCRETE CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. WIDE FLANGE BEAM EMBEDDED IN CAISSON, REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

DETAIL:

SILENT SCREEN POST EMBEDDED IN CAISSON DRAWN BY: DATE:

ISOMETRIC NOT TO SCALE

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

3 OF 3

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN POST EMBED IN CAISSON.dwg, SILENT SCREEN POST EMBED IN CAISSON pg 3, 1/3/2011 8:15:05 AM

NT CO

PANEL LENGTH VARIES REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


3"

3"

WELD TO FLANGE

1 3/4"

BOLT HOLE, TYP. SEE PLANS 3"

WELD TO WEB

SUPPORT CLIP

BOLT HOLE, TYP. BASE PLATE

2 1/2"

3/16" SUPPORT ANGLE

BASE PLATE

NOT TO SCALE

ELEVATION B

NOT TO SCALE

NOT TO SCALE

3" 3"

ELEVATION A

ANCHOR BOLT

HOLE, TYP.

BASE PLATE

3"

1 3/8"

5"

SUPPORT CLIP SUPPORT ANGLE

BEAM

A B

HOLE, TYP. GALVANIZED BOLT PER SPECIFICATIONS, TO ATTACH SUPPORT ANGLE TO SUPPORT CLIP

2 1/2"

3/16" SUPPORT CLIP NOT TO SCALE DETAIL:

SILENT SCREEN SUPPORT ANGLE DETAILS DRAWN BY: DATE:

PLAN VIEW NOT TO SCALE

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN SUPPORT ANGLE DETAILS.dwg, SILENT SCREEN SUPPORT ANGLE DETAILS, 1/3/2011 8:17:08 AM

SUPPORT CLIP 1 1/4"

WELD TO WEB

WELD TO FLANGE

FLANGE OF BEAM

WEB OF BEAM


NOTES: 1. MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL.

BEAM

3"x3"x SPECIFIED LENGTH SUPPORT ANGLE BOLTED TO SUPPORT CLIP

3"x3"x5" SUPPORT CLIP WELDED TO WEB AND FLANGE OF BEAM

DETAIL:

SILENT SCREEN SUPPORT ANGLE DETAILS DRAWN BY: DATE:

CJB 2010-12-22

SCALE:

ISOMETRIC VIEW NOT TO SCALE

1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN SUPPORT ANGLE DETAILS.dwg, SILENT SCREEN SUPPORT ANGLE ISOMETRIC, 1/3/2011 8:16:48 AM

2. FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123.


C-C COLUMNS VARIES, REFER TO ARCH'L / CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

WIDE FLANGE BEAM (SQUARE TUBE MAY BE SUBSTITUTED) REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

2"x3"x2"x3/16" BROKE C CHANNEL WELDED TO STRUCTURAL BEAMS

SILENT SCREEN PANEL

ELEVATION NOT TO SCALE

NOTES: 1.

MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL. PANELS ARE 16 AND 22 GAUGE GALVANIZED (G-90) STEEL MEETING THE REQUIREMENTS OF ASTM A-653 STEEL.

2.

FINISH: STRUCTURAL STEEL WILL BE GALVANIZED PER ASTM A-123. THE PANELS WILL HAVE A GALVANIZED FINISH AND MAY BE PAINTED WITH AN EXTERIOR GRADE BAKED ON POWDER COAT PAINT SYSTEM PER THE OWNERS REQUIREMENT. COLOR SELECTION SHALL BE FROM THE EMPIRE ACOUSTICAL SYSTEMS STANDARD COLOR GUIDE. IN CASE OF SPECIAL COLOR AND COATING REQUIREMENTS, ADDITIONAL CHARGES WILL APPLY.

DETAIL:

SILENT SCREEN C CHANNEL VERTICAL INSTALLATION DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN C CHANNEL VERTICAL INSTALL.dwg, SILENT SCREEN C CHANNEL VERTICAL INSTALL ELEVATION, 1/3/2011 8:07:40 AM

VARIES, REFER TO ARCH'L / CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.

2"x3"x2"x3/16" BROKE C CHANNEL WELDED TO STRUCTURAL BEAMS


C-C COLUMNS VARIES, REFER TO ARCH'L / CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS. SILENT SCREEN PANEL 2"x3"x2"x3/16" C CHANNEL WELDED TO STRUCTURAL BEAMS

2"x3"x2"x3/16" BROKE C CHANNEL WELDED TO STRUCTURAL BEAMS

ISOMETRIC NOT TO SCALE

DETAIL:

SILENT SCREEN C CHANNEL VERTICAL INSTALLATION DRAWN BY: DATE:

CJB 2010-12-22

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN C CHANNEL VERTICAL INSTALL.dwg, SILENT SCREEN C CHANNEL VERTICAL INSTALL ISOMETRIC, 1/3/2011 8:07:17 AM

WIDE FLANGE BEAM (SQUARE TUBE MAY BE SUBSTITUTED) REFER TO CIVIL / STRUCTURAL PLANS FOR EXACT SPECIFICATIONS AND DIMENSIONS.


3 1/4" O.D.

3 1/4"

2" O.D.

2"

3 1/4"

2 7/8" MIN. I.D.

3/16" PLATE FOR PANEL SUPPORT

"BROKE" C CHANNEL SECTION

1.

MATERIAL USED: STRUCTURAL STEEL IS ASTM A-36 STEEL THAT WILL BE GALVANIZED PER ASTM A-123.

2.

FINISH: STRUCTURAL STEEL WILL HAVE A GALVANIZED FINISH.

3.

A 2"x3 1/4"x3/16" PLATE WILL BE WELDED AT THE BOTTOM OF EACH VERTICAL "BROKE" C CHANNEL AS SUPPORT FOR THE PANELS.

PANEL LENGTH VARIES, SEE ARCH'L / CIVIL / STRUCTURAL

VERTICAL "BROKE" C CHANNEL

VERTICAL "BROKE" C CHANNEL 12" SILENT SCREEN PANEL

DETAIL:

SILENT SCREEN "BROKE" C CHANNEL

2"

2"x3 1/4"x3/16" PLATE FOR PANEL SUPPORT

DRAWN BY: DATE:

CJB 2010-12-23

SCALE:

"BROKE" C CHANNEL & SUPPORT PLATE ELEVATION

1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

1 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN BROKE C CHANNEL.dwg, SILENT SCREEN BROKE C CHANNEL pg 1, 1/3/2011 8:06:40 AM

NOTES:

3/16"


SILENT SCREEN PANEL

WALL / MOUNTING SURFACE (BY OTHERS) "BROKE" C CHANNEL

"BROKE" C CHANNEL

6"

SILENT SCREEN PANEL RECOMMENDED WALL-MOUNTED "BROKE" C CHANNEL

SILENT SCREEN PANEL

6" x 3/16" FLAT PLATE RECOMMENDED WALL-MOUNTED "BROKE" C CHANNEL 2 ~ "BROKE" C CHANNELS, WELDED BACK TO SIDE

POST

SILENT SCREEN PANEL

2 ~ "BROKE" C CHANNELS, WELDED BACK TO BACK SILENT SCREEN PANEL RECOMMENDED POST-MOUNTED "BROKE" C CHANNEL CONFIGURATION

SILENT SCREEN PANEL

POST

RECOMMENDED CORNER POST-MOUNTED "BROKE" C CHANNEL CONFIGURATION

SILENT SCREEN PANEL 3/16" FLAT PL. BETWEEN C CHANNEL AND POST

3/16" FLAT PLATE BETWEEN C CHANNELS "BROKE" C CHANNEL, TYP.

DETAIL:

SILENT SCREEN "BROKE" C CHANNEL

POST DRAWN BY: DATE:

SILENT SCREEN PANEL RECOMMENDED CORNER POST-MOUNTED "BROKE" C CHANNEL CONFIGURATION

CJB 2010-12-23

SCALE: 1106 South Mays Ste. 240 Round Rock, Texas 78664 PHONE: (512) 828-3138 FAX : (512) 233-1757 www.empireacoustical.com

NO SCALE SHEET:

2 OF 2

\\M25-server\cad\EAS Details\Silent Screen\EAS-SILENT SCREEN BROKE C CHANNEL.dwg, SILENT SCREEN BROKE C CHANNEL pg 2, 1/3/2011 8:06:19 AM

WALL / MOUNTING SURFACE (BY OTHERS)

FASTENER TO SECURE C CHANNEL TO WALL (BY OTHERS)


Technical Product Information BOARD INSULATION 15080* PROCESS EQUIPMENT INSULATION 40 42 23** MINERAL BOARD INSULATION 07 21 13**

General Product Information:

Description & Common Applications:

ROXUL® products are mineral wool fibre insulations made from basalt rock and slag. This combination results in a noncombustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.

The RHT® 60 product is a non-combustible, semi-rigid mineral wool insulation board that is water repellent and designed for high temperature applications where durability and some flexibility are required. Common application areas for the RHT series of board insulation are storage tank insulations, drying/oven equipment, petro-chemical and power generating equipment protection where high temperature, fire resistance, and moisture resistance are concerns.

Compliance and Performance: ASTM C 612 Mineral Fiber Block and Board Thermal Insulation MEA Approval New York City Approval City Of Los Angeles Approval

Type IVB, Complies 331-97-M RR 25444

Fire Performance: ASTM E 136 CAN4 S114 ASTM E 84(UL 723)

Behaviour of Materials at 750°C (1382°F) Test for Non-Combustibility Surface Burning Characteristics

CAN/ULC S102

Surface Burning Characteristics

Non-Combustible Non-Combustible Flame Spread = 0 Smoke Developed = 0 Flame Spread = 0 Smoke Developed = 0

Maximum Service Temperature: ASTM C 411

Hot Surface Performance

In Compliance with ASTM C612 @ 1200°F(650°C)

Linear Shrinkage

<1% @ 1200°F (650°C)

Moisture Sorption

0.01%

R-value/inch @ 75°F RSI value/25.4 mm @ 24°C

4.2 hr.ft².F/Btu*** 0.74 m²K/W

Corrosiveness to Steel Stainless Steel Stress Corrosion Specification as per Test Methods C871 and C692: U.S. Nuclear Regulatory Commision, Reg. Guide #1.36: U.S. Military Specifications MIL-I-24244 (all versions including B and C)

Pass Conforms

Dimensional Stability: ASTM C 356

Moisture Resistance: ASTM C 1104

Thermal Resistance: ASTM C 518 (C 177)

Corrosive Resistance: ASTM C 665 ASTM C 795 ****

Acoustical Performance ASTM C 423 CO-EFFICIENTS AT FREQUENCIES Thickness 1.5” 2.0”

125 Hz 0.19 0.26

250 Hz 0.55 0.71

500 Hz 1.03 1.14

1000 Hz 1.06 1.09

2000 Hz 1.02 1.04

4000 Hz 1.01 1.03

NRC 0.90 1.00

*MASTER FORMAT 1995 EDITION **MASTER FORMAT 2004 EDITION *** at the time of manufacturing


Thermal Conductivity: 0.90 Therm al Conductivity (Btu.in/hr.ft2F)

0.13

Thermal Conductivity (W/mC)

0.11 0.09 0.07 0.05 0.03 0

50

100

150

200

250

300

350

400

0.80 0.70 0.60 0.50 0.40 0.30 0.20 0

100

200

Mean Tem perature (C)

300

400

500

600

700

M e an Te m p e ratu re (F)

Compressive Strength: ASTM C 165

at 10%: at 25%:

Density: ASTM C 612-93 - Nominal ASTM C 612-00 - Actual ≥ 2” thickness

104 psf (5 kPa) 230 psf (11 kPa)

6.0 lbs/ft3

96 kg/m3

4.4 lbs/ft3

70 kg/m3

Dimensions: 24” (width) x 48” (length) 610 mm (width) x 1219 mm (length)

Thickness: Product thickness is available in 1” through 2.5” in 1/2” increments as well as 3”, 4” and 5” offerings.

Key Application Qualifiers: • Easy to install • Service temperature 1200°F (650°C) • Non-combustible • Lightweight • Can be fabricated/laminated • Excellent thermal resistance • Low moisture sorption • Good compressive resistance • Non-corrosive • Chemically inert • CFC and HCFC free product and process • Made from natural & recycled materials

For additional sizes, please contact our customer service representatives.

Facing: This product can be faced with reinforced foil. Please note that the facing will influence the product’s service temperature range.

Other ROXUL Products: Please consult ROXUL for all your insulation needs. We have an extensive range of products for all applications from pipe insulation to commercial products to residential batts. ROXUL invites all inquiries and will act promptly to service all of your requirements.

**** “Provisions for lot testing may be required, consult manufacturer.” Note: As ROXUL Inc. has no control over installation design and workmanship, accessory materials or application conditions, ROXUL Inc. does not warranty the performance or results of any installation containing ROXUL Inc’s. products. ROXUL Inc’s. overall liability and the remedies available are limited by the general terms and conditions of sale. This warranty is in lieu of all other warranties and conditions expressed or implied, including the warranties of merchantability and fitness for a particular purpose.

ROXUL INC. www.roxul.com

Milton, Ontario Tel: 905-878-8474 Tel: 1-800-265-6878

Fax: 905-878-8077 Fax: 1-800-991-0110 Revised: March 10, 2009 Supersedes: July 3, 2008

silent-screen-standard-submittal-package_1  

Silent Screen Submittal Package 1106 South Mays, Suite 240, Round Rock, TX 78664 ● Phone: 512.828.3138 ● Fax: 512.233.1757 Email: sean@empir...

Read more
Read more
Similar to
Popular now
Just for you