23 09
Spinning Reel
Maintenance Tips
DO NOT • Rinse your reel when drag knob is loose • Remove handle when washing
1.
Tighten drag knob and rinse under low pressure tap water in upright position
2.
Rotate spool and rinse for 15-20 seconds
• Using high pressure water to wash down your reel • Wash your reel in an upside down position • Soak reel in a bucket of fresh water • Place your reel under direct sunlight after washing
Use a toothbrush to brush handle area, line roller area and drag knob
4.
Spin reel in fast rotation to channel excess water out
5.
Use a dry cloth to wipe down reel exterior
6.
Use an air duster to spray difficult access area/joints to clear off excess water
7.
Remove drag knob and wipe off excessive water on spool and rotor area
8.
Screw back drag knob and leave it in a dry and cool place
•
Remove line after deep sea fishing to wash down spool or if intending to keep for long time storage
•
Avoid placing your reel on boat side rod holders when boat is travelling to prevent splashes of sea water
•
Put 1-2 drops of oil on main shaft / line roller / handle knob bearings / drive gear bearings and screws after 2-3 times usage
• Send for servicing every 6 months if the reel is being used frequently
REELS
3.
JDM Spinning Export Spinning Reels Reels
Recommendations