Lofts

1.2

1.3

Key

1.4

{0,0,0} {0,150,150}

{0,90,150}

{0,90,150} {50,0,150}

{150,90,150}

{105,0,150}

{0,0,90} {150,150,100} {150,150,105} {150,0,150}

{0,105,0}

{150,0,90}

{150,150,0} {150,150,0}

{150,120,0}

{150,150,105}

{0,105,0}

{0,150,0}

{65,150,0} {0,0,0}

Attractor / Control Points (X,Y,Z) Grid Points

{0,40,150}

{0,45,150}

{0,75,150}

{90,0,0}

{150,0,90}

{150,60,0}

{150,60,0}

{150,0,0}

{Index Selection}

{Index Selection}

{Index Selection}

{Index Selection}

2.1

2.2

2.3

2.4

{-100,-148,157}

{77,166,157}

{80,-3,0} {Surface Grid of 1.1}

{Attractor Point Location}

{Attractor Point Location}

{Attractor Point Location}

3.1

3.2

3.3

3.4

Paneling

Shiho Margaret Takahashi - 821698

Paneling Grid & Attractor Point

Module 02 - Task 01

1.1

+

Design Matrix 1:5

A similar diamond type shape is repeated on the panels of this surface. The shape is stretched as it approaches the longest diagonal axis. It allows for an interesting pattern to be reflected on the ground when sunlight enters the structure, and compliments the curve of the surface.

The openings of each face of the panel are largest at this corner of the surface and gradually become smaller as it reaches the opposite corner which has panels with completely closed faces. This is an effective design when considering the entry of sunlight into the interior space.

The waffle structure contributes to the creation of an interior volume and acts as the support of the two paneled surfaces. Its design also assists with the concept of letting in a lot of sunlight

The individual panels start as a pyramid attracted to the top corner and gradually splits into two and moves the vertex of the pyramids towards the center as it reaches this bottom corner. This allows for a sense of movement and compliments the curvature and long diagonal axis of this surface.

Exploded Isometric 1:1 0

20

60mm

Grid Manipulation

1.2

1.3

Key

1.4

{0,0,0}

Attractor / Control Points (X,Y,Z) Attractor / Control Curves Grid Points

{85,50,150}

{150,100,150}

{-16,7,45}

{150,150,50}

{161,7,10}

{150,0,0}

{150,0,0}

{150,0,0}

Geometry Distribution

Module 02 - Task 02

1.1

Geometry Tranformation

Shiho Margaret Takahashi - 821698

{Curve Attractor}

{Curve Attractor}

{Curve Attractor}

{Curve Attractor}

2.1

2.2

2.3

2.4

{Volume Gravitational Centre}

{Sphere}

{Dipyramid}

{Dipyramid + Pyramid}

3.1

3.2

3.3

3.4

{186,173,0}

{186,173,0}

{Reverse Attractor Point}

{Attractor Point}

{Morph}

{Random Scale}

Design Matrix 1:5

These cut outs could be interesting if served as an interior garden or a similar space where people could reach out for fresh air and direct sunlight An opening is created where the geometry intersects. Creates a continuity between the three open spaces.

The solids left behind can be interpreted as the interior volume/space. The angled cut out on this sloped face can create interesting entry points for sunlight if constructed by a transparent material.

Isometric 1:1 0

20

Solid boolean using 3.1 attractor point iteration. 60mm

The interior space will have an interesting path of circulation as the spikes from the geometry create an interesting over hang from the ceiling

Advertisement