Issuu on Google+

Total nº of pages: 5 OFFER FOR USED CUT-TO-LENGTH AND SLITTING LINE-SEPARATE STRAIGHTENER

Page

1

We are pleased to present our best financial proposal for the supply of a cut-to-length and slitting line- separate straightener for a 1500 x 1,5mm coils, special setup for aluminum, also can cut all other materials.

Soluciones técnicas metálicas integradas S.L. | C/ Luxemburg s/n Nave 16A E-08191 Rubí (Barcelona) | Tel. +34 936 977 847 | Fax +34 936 977 848 info@stmi.es | www.stmi.es


TECHNICAL SPECIFICATIONS AND BREAKDOWN OF THE MACHINE DESCRIPTIONS Decoiler Max. coil weight Max. coil width Max. coil diameter Max. coil diameter with loading trolley Mandrel expansion diameter Uncoiled speed Power supply Direction of work Coil press arm

7.000 Kg 1.500 mm 1.400 mm 1.400 mm 470/520 mm 20 m/min 380 V 50 Hz from right to left

Feeding table 1 Straightener By using a 11 rollers diameter 100mm straightener, 2 rollers to drag in front of straightener, 7 rollers for straighten, and 2 rollers after straighten. The 4 drag rollers and all lower rollers are motorized. The upper roller for material load, raise up by two pneumatic cylinders and all the upper rollers for straight has manual high regulation, by using a fly wheel. Feeding table 2 Plastic film applicator Pinch roll Slitting line for sheet 1500 x 1.5mm By using a circular shear equipped with 5 set of cutters with quick adjustment system. The straightener and the shear are motorized with the same CC. motor. Cut-to-length for sheet 1500 x 2mm By using a mechanical shear guillotine with pneumatic clutch-brake. Scrap decoilers Control cabinet This machine it's equipped with an electronic control cabinet with a new electronic programmer to introduce length and number of cuts up to 9 different programs.

Page

2

STACKING TABLE with a constant level system 1500mm x 4000mm

Soluciones técnicas metálicas integradas S.L. | C/ Luxemburg s/n Nave 16A E-08191 Rubí (Barcelona) | Tel. +34 936 977 847 | Fax +34 936 977 848 info@stmi.es | www.stmi.es


Page

3

ANNEX PHOTOGRAPHIC

Soluciones técnicas metálicas integradas S.L. | C/ Luxemburg s/n Nave 16A E-08191 Rubí (Barcelona) | Tel. +34 936 977 847 | Fax +34 936 977 848 info@stmi.es | www.stmi.es


4 Page Soluciones técnicas metálicas integradas S.L. | C/ Luxemburg s/n Nave 16A E-08191 Rubí (Barcelona) | Tel. +34 936 977 847 | Fax +34 936 977 848 info@stmi.es | www.stmi.es


USED CUT-TO-LENGTH AND SLITTING LINE-SEPARATE STRAIGHTENER