Issuu on Google+

5 Castle Court Thornlie Price: $540,000 - $560,000 Voyage Destination! Seeking the fountain of youth or just the perfect home that satisfies the whole family's needs? Then look no further as the compass point has landed directly at 5 Castle Court, Thornlie. Be impressed as you enter through the main entry timber door, with spacious living areas and massive 5 bedrooms with formal lounge, kitchen, and family/dining combined giving a expansive presence to this home. Games room leading out to a paved courtyard, giving easy access to separate workshop, carport and parking for the caravan, boat or RV. Master bedroom includes walk in wardrobe and ensuite, while all other others are complimented with built in wardrobes and top quality carpet coverings throughout. Included also is a self-contained granny flat at the rear of the home, giving a perfect situation for extended guest, family or rental proposition. 5 Castle Court is a home on your "Do Not Miss" list. Call Phil Taylor now on 0402 487 578 and ask for a Property Information Memo pack to be sent out today!


More About this Property Property ID

12TDFFY

Property Type

House

Land Area

796 m2

Including

Dining Room Gas Lounge Pergola Rumpus Room Storage

LJ Hooker Thornlie Contact:

Phil Taylor

Email:

thornlie@ljh.com.au

Phone:

(08) 9459 7788

Fax:

(08) 9493 1552

LJ Hooker Financial Services Contact:

Brian Brooks

Phone:

0409 113 237

Email:

bbrooks.finance@ljh.com.au

LJ Hooker Settlements Phone:

08 9426 6088

Email:

settlementswa@ljh.com.au

Disclaimer The above information has been furnished to us by the Vendor. We have not verified whether or not that information is accurate and do not have any belief one way or the other in its accuracy. We do not accept any responsibility to any person for its accuracy and do no more than pass it on. All interested parties should make and rely upon their own enquiries in order to determine whether or not this information is in fact accurate.


Enquiry Confirmation

PO Box 378 Abbotsford VIC 3067 Phone: 1100

Job No. 4671224 To: Company: Address:

Caller ID: Phone: Mobile: Fax No: Email:

Mr Phil Taylor LJ Hookers Shop 9 1 Holmes St Southern River Wa 6110

986090 0893984000 0402487578 0893980176 southperthrealestate@gmail.com

Warning: The map below only displays the location of the proposed dig site and does not display any asset owner’s pipes or cables. The area highlighted has been used only to identify the participating asset owners, who will send information to you directly. Asset owners aim to provide you with details of their assets within 2 working days. Enquiry Date: Start Date: Address: Intersection

• • •

17/05/2011 8:58:14 AM 19/05/2011 5 Castle Ct Thornlie WA 6108 Not Specified

Check that the location of the dig site is correct. If not you MUST submit a new enquiry. Should the scope of works change, or plan validity dates expire, you must submit a new enquiry. Do NOT dig without plans. Safe excavation is your responsibility. If you do not understand the plans or how to proceed safely, please contact the relevant asset owners.

Map Ref: Streetsmart 435C7 Additional work site information: Marketing Visit our new Web site - www.dialbeforeyoudig.com.au (WA)

• If plans are not received within 2 working days, contact the asset owners directly & quote their Sequence No. • ALWAYS perform an onsite inspection for the presence of assets. Should you require an onsite location, contact the asset owners directly. Please remember, plans do not detail the exact location of assets. • Pothole to establish the exact location of all underground assets using a hand shovel, before using heavy machinery. • Ensure you adhere to any State legislative requirements regarding Duty of Care and safe digging requirements. • If you damage an underground asset you MUST advise the asset owner immediately. • By using this service, you agree to the terms and disclaimers set out at www.1100.com.au.

• For more information on safe excavation practices, visit www.1100.com.au

The asset owners listed below have been requested to contact you with information about their asset locations within 2 working days. Additional time should be allowed for information issued by post. Seq No.

Asset Owner

Contact No

21504685 21504687 21504686 21504684

Western Power Telstra, WA WA Gas Networks Water Corporation WA

1300769345 1800653935 131352 0894248115

Notification Status Notified Notified Notified Notified

** Asset owners highlighted by asterisks ** require that you visit their offices to collect plans. # Asset owners highlighted with a hash require that you call them to discuss your enquiry or to obtain plans.


To: Mr Phil Taylor Company: LJ Hookers Sequence Number:

21504685

Job Number: 4671224

Data Services Customer Services Level 5 West 363 Wellington Street Perth WA 6000 T: 1300 769 345 F: (08) 9326 6079 www.westernpower.com.au Electricity Networks Corporation ABN 18 540 492 861

Dig Site Location: 5 Castle Ct

Thornlie6108NB: New information on coversheet DIAL BEFORE YOU DIG 1100 INFORMATION SHEET This information is only valid for 30 days from date of issue. 17/05/2011 7:21:42 AM •

It is mandatory for the customer/excavator/contractor to physically locate all services before excavating.

Never assume depth and alignment of cables.

When undertaking any works, it is the responsibility of the customer/excavator/contractor to ensure that all due care and safe clearances are observed and maintained.

Check Utility Providers Code of Practice for Western Australia requirements for work in road and rail reserves at this Main Roads Western Australia site: http://www.mainroads.wa.gov.au/UsingRoads/RoadTrafficInformation/Pages/WorksOnMainRo ads.aspx

Western Power underground electrical cables are in the following categories: • TRANSMISSION (66 kV, 132 kV and/or 330 kV) If these cables are indicated on the map, and are affected by your works, you must call the Team Leader Transmission Lines Relocation 9326 6429 - 2 weeks prior to commencing works. • OTHER CABLE TYPES include pilot cables, high voltage cables (11 to 22 kV), low voltage cables (440 V) and streetlight cables (240 V). The typical alignment for underground assets is 0 - 0.6m and 2.4 – 3 m from the property boundary. Western Power underground communications pipes are also known as: •

Perth Fibre Network: These pipes are typically 3 – 4.2 m from property boundary but may vary.

DESIGN or DESIGN DRAWING means field-works are possibly in progress or just completed and the plans supplied may differ from the current state in the ground. NOT depicted on Western Power Dial Before You Dig Plans are: •

Cables within a private property, for example, from pillar (green dome) to your electric meter. A cable-locating company will have to be contacted for on-site locations in your private property.

Private cables belonging to government authorities, for example, Main Roads, RailNet etc.

Private streetlight cables belonging to local government, private estates etc.

DMS#: 3865531v9


Overhead cables (so LOOK UP to check for overhead dangers!)

CONTACT INFORMATION If you need to: • •

protect/support the cable/s at your excavation site or work near overhead powerlines

please contact Western Power’s Customer Contact Centre on 13 10 87. For more information on electrical safety, visit http://westernpower.com.au/safety/index.html. In the event that you discover a cable NOT shown on your map, contact 1300 769 345.

In the event of damage to a Western Power underground cable call Western Power Faults and Emergencies on 13 13 51.

DISCLAIMER

The provisions of this Disclaimer cannot and do not purport to limit or otherwise exclude the application of, or any warranties, rights, powers or remedies under, any Commonwealth or Western Australian legislation that does not permit or otherwise makes void any such exclusion or limitation provisions, including but not limited to, section 52 of the Trade Practices Act 1974 (Cth) and section 10 of the Fair Trading Act 1987 (WA). Whilst Electricity Networks Corporation (trading as Western Power) and its officers, employees, agents, contractors, or advisers (Associates) have used their reasonable commercial endeavours to ensure that all and any of the information, statements or representations (if any) express or implied (including by silence) in this Information Sheet and accompanying or related plans, diagrams, drawings and data (Information) is correct, the Information is to be used as a guide only. By taking the Information Sheet and/or making any use of the Information, all persons using or seeking to use the Information (Users) represent and warrant to Western Power and its Associates and each of them that they will comply with the obligations referred to in this Information Sheet and in the Information. Subject always to the provisions in the first paragraph of this Disclaimer: Western Power and each of its Associates: (1) do not make or give any representation or warranty, express or implied, as to the accuracy, reliability, currency, timeliness or completeness of; (2) disclaim to the fullest extent the law permits and will not be liable or responsible for, any liability, loss or damage, whether direct or indirect (and whether or not arising out of negligence, breach of duty or statutory duty, or lack of care, of Western Power and its Associates or of any of them) Users may suffer or incur arising out of, or in connection with, any use or reliance on; and (3)

are under no obligation to correct, update or revise, the Information.

DMS#: 3865531v9


LEGEND TRANSMISSION

COMMUNICATIONS

132kv Underground

Perth Fibre Conduit UG

132kV Termination

Communication Pit

66kV Underground 66kV Termination 330kV Underground DISTRIBUTION - HIGH and LOW VOLTAGE Cable Joint

Street Light Pilot, Overhead

Join Underground Data Overhead Data Underground

Street Light Pilot, Underground Street Light Circuit, Overhead Street Light Circuit, Underground

Kiosk / Ring Main Unit

HV Cable Pole Termination

LV Distribution Frame

HV Underground

Pillar (Green Dome) or Pit

Single Phase Underground

Substation Underground crossing

LV Cable Pole Termination LV Underground

Oil Pipe

Fuses & Switches

Lamp

Lot & House Number

TYPICAL POWER PLAN

DMS#: 3865531v9

TYPICAL COMMUNICATIONS PLAN


WA GAS NETWORKS UNDERGROUND ASSET DETAILS

ASSETS AFFECTED - see accompanying plan Job No: Sequence No: Date of Issue: Phone: Mobile: Fax:

Mr Phil Taylor LJ Hookers Shop 9 1 Holmes St Southern River Wa, 6110

4671224 21504686 17/05/2011 0893984000 0402487578 0893980176

DBYD Utility Registration Name: 70852 - WA Gas Networks DBYD Location: 5 Castle Ct, Thornlie, WA, 6108

ATTENTION: This response to your inquiry has been interpreted from details in your requested DBYD picture location request only (not any street address you gave). It is your duty to ensure the accompanying plan/s match your geographical area of works.

IF YOU SEE, HEAR, SMELL OR OTHERWISE DETECT GAS, LEAVE THE IMMEDIATE AREA AND THEN CALL 13 13 52 Our records indicate that WA Gas Networks Pty Ltd (WAGN) gas infrastructure IS PRESENT in the vicinity of and/or surrounding area of the above enquiry. This response relates only to WAGN assets. Your Duty of Care requires that personnel must at all times comply with, and have on site, this information sheet and the accompanying plan(s). All plans are subject to this information sheet. You should also refer to the “Questionnaire for works near WAGN gas infrastructure” on page [5] of this document, which must be read and all questions answered. If you answer “yes” to any of the questions you must contact WA Gas Networks during business hours on 1300 926 755. All information provided is to be used as a guide only (see Disclaimer item 5). It does not absolve you or third parties from your Duty of Care obligations, including to take additional precautions where work has the potential to impact on gas assets, public safety or the environment, or from your duties at law (including Reg 3.21 of the Occupational Safety and Health Regulations 1996).

WARNINGS • •

• • • • • • •

No works of any type within 15 metres of any HIGH PRESSURE gas infrastructure without prior approval from WA Gas Networks. NO HOT WORK within 15 metres of any gas infrastructure except in compliance with applicable laws & Australian Standard 1674. DO NOT let heat sources or hot works impact on any gas infrastructure and take into consideration that the ground or adjacent structures may also be capable of transmitting heat so as to circumvent protection afforded by a heat shield or barrier. DANGER Gas can cause asphyxiation and is flammable. Keep all ignition sources well away (eg flames, matches/lighters, sparks, electrical devices, vehicles or engines, mobile phones, cameras). Gas pipes must not be unsupported or left without adequate cover or protection without prior approval from WA Gas Networks. Damage to the pipe coating or pipe itself can be very dangerous if not given immediate attention. Report any damage to WA Gas Networks immediately on 13 13 52. Do not attempt to repair any damaged gas infrastructure. No alteration or removal of live or abandoned gas infrastructure without prior written approval from WA Gas Networks. Any abandoned or proposed gas infrastructure indicated on the gas plans must be treated as live. Never assume the location or depth of any gas infrastructure. Pipes may not follow straight lines or maintain a constant depth. Always check carefully (eg by careful hand digging of potholes). Unauthorised repairs or tampering with gas infrastructure may result in prosecution under the Energy Operators (Powers) Act 1979. WA Gas Networks reserves all rights to recover compensation for loss or damage to its gas infrastructure or other property including for indirect or consequential losses. Page 1 of 5

Document No.:

GDW WI 1050 RF 0002

Revision: Review Due:

3 23/03/2011


PLANS: Plans provided are current for 30 days only from date of request. You must use current plans at all times. Plans do not show all gas service lines (which connect gas mains to individual meter positions). See condition 3(c) below. If plan shows additional detail symbols ( * ) or ( further detail from the number below.

) in the area of proposed works it is your duty to obtain that

Plans (including the location of pipes, services, infrastructure and boundaries) are approximate only. You must safe and proper procedures - including potholing (see condition 4 below) Plans are not a guide as to gas availability for connection purposes. To call WA Gas Networks:

weekdays from 8am to 4pm, call – 1300 926 755 after hours, weekends and emergencies, call – 13 13 52

CONDITIONS FOR WORKS IN THE VICINITY OF WA GAS NETWORKS ASSETS 1. Compliance with Warnings You must comply with the Warnings contained in this information sheet and the accompanying plan(s). 2. Compliance with General Guidelines for Third Party Works, applicable laws and duty of care All work (including but not limited to using Excavator’s Augers, Directional, drilling machines, ‘Ditch Witch’ type trenching machine, Loader, Dozer, Skid Steer (Bob Cat)) must comply with all applicable requirements in the “General Guidelines for Third Party Works” and with all applicable laws and Australian Standards. All due care must be exercised to locate any gas infrastructure in the vicinity and when conducting any works near them. 3. All Gas Infrastructure All work that may have any impact upon any gas infrastructure (see 3(a), (b) and (c) below for examples) should be carefully planned with notification to WA Gas Networks well in advance of commencement (see “General Guidelines for Third Party Works” for required lead times and contact details engineering.services@wagasnetworks.com.au). Amongst other things, this includes excavation of or near gas pipelines, boring/drilling, crossings of pipelines (including by other underground infrastructure e.g. drains, power cables, etc), road works and structural installations. In addition: a. High Pressure Pipelines (HP, PEHP > 110, CHP, FHP) No works of any type are permitted within 15 metres of these pipelines without prior approval from WA Gas Networks. For approvals contact WA Gas Networks on 1300 926 755. You must ascertain the location of any high pressure pipeline, in relation to your proposed work by: •

locating a straight line between two high pressure warning signs and

assessing the distance from this line to your proposed work area.

WA Gas Networks may require stand-by supervision during your works and will advise of attendance requirements. b. Medium (MP), Medium-Low (MLP), Low (LP) and other Pipeline Pressures These pipelines are installed in most streets throughout the Perth metro area and several country centres. Main valves, regulator sets and test points also exist at intervals along these pipelines. Where work may impact upon these pipelines or assets then WA Gas Networks must be contacted as per item 3 above. c. Gas Services and Meters If a gas meter is installed on a property, an underground gas service pipe will run from the meter position to the gas main in the street. Plans do not show all gas service lines, but their presence must be anticipated. Most gas meter boxes installed since 1996 will include a sticker giving approximate guidelines for the gas service line location. All due care must be exercised to locate any gas services in the vicinity and when conducting any works near them.

Page 2 of 5 Document No.:

GDW WI 1050 RF 0002

Revision: Review Due:

3 23/03/2011


4. Compliance with Safe Work Practices It is your responsibility to have and comply with adequate safe work practices and procedures. Without limiting your obligations: PLAN - The complete Dial Before You Dig documentation and plans must always be on site and referred to for the duration of work. Refer to regulation 3.21 of the Occupational Safety and Health Regulations 1996 and the Utility Providers “Code of Practice” for further useful information. POTHOLE - Using current Dial Before You Dig plans, all gas pipes should be located (including any deviation in the direction of a gas pipe) by exposing them by careful digging using a HAND SHOVEL. Where the proposed work is parallel to a gas pipeline, pothole every 5 metres along the entire route. Damage to the pipe coating or to the pipe itself can create a very dangerous situation if not given immediate attention. If damage does occur, it must be reported to WA Gas Networks immediately on Ph. 13 13 52. PROTECT - Supervise and monitor all excavations near gas infrastructure using a dedicated spotter. Where any gas infrastructure is required to be exposed, adequate protection of the gas infrastructure is required to prevent potential damage. Also implement appropriate controls when conducting ‘hot work’ ( in accordance with AS 1674) in the vicinity of the WAGN GDS such as; isolation; separation distance; the placement of an effective non-combustible barrier of sufficient size and thermal resistance for the intensity, type and duration of heat exposure; gas monitoring; monitoring the environment surrounding the WAGN GDS to ensure it is not being impacted by the work, and other controls as necessary. 5. Disclaimer & further terms a. Nothing in this document, any accompanying plan or the “General Guidelines for Third Party Works” (together called “Documents”) purports to exclude or modify any term, condition or warranty to the extent that by law it cannot lawfully be excluded or modified by agreement or notice, including but not limited to those under Part V of the Trade Practices Act 1974 (Cth) and corresponding provisions of state legislation. b. If any of WA Gas Networks Pty Ltd (“WAGN”), or their respective related entities, officers, employees, agents, contractors or advisers (together called “Associates”) is liable for a breach of a term, condition or warranty described in paragraph 5(a) above, its liability is, to the fullest extent permitted by law, limited to any one or more of the following as it determines in its absolute discretion: i.

in relation to goods supplied by them, replacing or repairing the goods, supplying an equivalent item, paying the cost of replacing or repairing the goods or paying the cost of acquiring or hiring an equivalent item; and

ii.

in relation to services supplied by them, the re-supply of the services or the payment of the cost of having the services re-supplied.

c. Subject to paragraphs 5(a) and (b), but otherwise despite any other provision in the Documents, no representation or warranty is made or given (whether expressly or by implication) by any of WAGN or their respective Associates in respect of any information contained or referred to in any of the Documents or in any other communication from WAGN concerning any of the Documents or the subject matter of any of the Documents (“Information”). In particular, but without limiting the generality of the foregoing limitation, none of WAGN or their respective Associates makes any warranty or representation as to the truth, accuracy, completeness, reliability, currency, timeliness, quality or fitness for any purpose of or the standard of care taken in the preparation of any Document or Information (including, but not limited to, the accuracy of the scale of, or the location of any thing or symbol shown on, any plan or diagram). d. Subject to paragraphs 5(a) and (b), to the maximum extent permitted by law, none of WAGN or their respective Associates is liable to any person or other body (“Recipient”) who receives or otherwise obtains access to all or any part or parts of the Documents or Information, in any way (including, but not limited to, liability for negligence, breach of statutory duty or lack of care) in respect of any cost, expense, damages, loss or liability, including, but not limited to: i.

any financial or economic loss, cost, expense or damage, including but not limited to loss of production, loss of profit, loss of revenue, loss of use, loss of contract, loss of goodwill or loss of business opportunity;

ii.

any new or increased costs or expenses, including but not limited to financing or operating costs;

iii. any failure to achieve any actual or anticipated saving in respect of any cost or expense; Page 3 of 5 Document No.:

GDW WI 1050 RF 0002

Revision: Review Due:

3 23/03/2011


iv. any cost, expense, damage or loss resulting from any liability of the Recipient to any other person or body howsoever and whensoever arising, suffered or incurred by the Recipient in relation to, or in connection with, the disclosure to them of, or use of, or reliance on, all or any part or parts of the Documents or Information. e. By using any Document or Information, each Recipient is taken to represent and warrant to WAGN that the Recipient will comply with the conditions and other terms referred to in the Documents or Information, including but not limited to conditions that: i.

the Recipient must comply with the conditions in numbered paragraphs 1 to 4 above and this paragraph 5;

ii.

as between WAGN and each Recipient, WAGN owns the Information and all rights and title in and to the Information are to remain vested in WAGN;

iii. no Recipient has any right, title or interest in the Information or, except as expressly provided for in the Documents, any licence or right to copy, alter, modify, publish or otherwise use or deal with the Information without prior written approval from WAGN; iv. WAGN makes no representation and gives no warranty as to its right to disclose any Information; v.

the Recipient relies on any Information entirely at its own risk and expense;

vi. the Recipient must undertake its own independent due diligence and investigations in relation to the Information; vii. none of WAGN or their respective Associates owes the Recipient any duty of care in respect of the Information; and viii. none of WAGN or their respective Associates is under any obligation to correct, update or revise any Documents or Information.

Gas Main and Service Identification LEGEND 1. Pipe Diameter (mm) 2. Pipe Material: CI = Cast Iron PE = PolyEthylene GI = Galvanised Iron PVC = PVC ST = Steel 3. Alignment (in metres from property line) 4. Pressure in main (eg MP = Medium Pressure) 5. Off Line Service- service may not be a straight line to meter. (Warning – OLS may not always be shown on plan. See item 3c above) 6. Service valve in the vicinity (Note: Service Valves may be “Buried”) 7. Pre-Laid Service laid in Common Trench 8. Main Status: (See warnings page 1) AB = Abandoned Mains CT = Mains in Common Trench PROP = Proposed Mains 9. Customer Connection: Does not indicate actual location of meter position D1 = Domestic C1 = Commercial 10. Additional detail available and must be obtained if within area of proposed works - see page 2 above

10

*

IF YOU SEE, HEAR, SMELL OR OTHERWISE DETECT GAS, LEAVE THE IMMEDIATE AREA AND THEN CALL 13 13 52

Page 4 of 5 Document No.:

GDW WI 1050 RF 0002

Revision: Review Due:

3 23/03/2011


Questionnaire for Works near WAGN Gas Infrastructure The accompanying documentation must be read and the following questions answered and instructions followed when planning and before commencing any work. Questions Yes No Will any works be within 15 metres of any High Pressure gas 1 infrastructure? If answered Yes you must contact the WA Gas Networks High Pressure Coordinator to seek prior approval on 1300 926 755 between 08:00 hours – 16:00 hours (Monday – Friday, except public holidays). If you answer Yes to any of the following questions you must contact WA Gas Networks Engineering Services to seek prior approval on (08) 9499 5200 between the above hours. Plan ahead and allow sufficient time for WA Gas Networks Engineering Services to consider your request. Question Yes No Will any works require the use of a vibrating roller within 15 2 metres of any gas mains? Will any works involve boxing the ground out to a depth of 3 300mm or more for the construction of a road/car park or crossover/driveway over a gas main? Will any works affect water flows or drainage, eg. surface 4 drainage, within 15 metres of any gas mains? Will any works involve traversing any gas infrastructure with 5 any heavy vehicle or plant (eg. cranes, agitators or trucks)? Will any works involve stockpiling of spoil, dangerous goods 6 or any other materials over any gas infrastructure? Will any works or structure (eg. fencing) obstruct access to 7 gas infrastructure? Will any works involve placing infrastructure eg. cable, pipes etc. that will not comply with the minimum separation 8 distances to the gas infrastructure: 300mm crossing, 500mm parallel? Will any works involve blasting that could affect any gas 9 infrastructure? Will any works involve the installation of electrical 10 infrastructure to operate above 22kV in the vicinity of any steel gas infrastructure? If unsure, please contact WA Gas Networks Engineering Services on (08) 9499 5200. IMPORTANT: it is your responsibility to TAKE CARE to comply with all requirements of WA Gas Networks Engineering Services (including their ‘Additional Information for Works near WAGN Gas Infrastructure’ (GDW WI 1880 RF 0001)), the WAGN Dial Before You Dig cover sheets and maps and all applicable laws and standards.

Page 5 of 5 Document No.:

GDW WI 1050 RF 0002

Revision: Review Due:

3 23/03/2011


ASSETVIEW SYMBOLS SHEET DISTRIBUTION MAINS High Pressure

Albany Pressure

Service Line

Fremantle High Pressure

Medium-Low Pressure

Scratch Design

Polyethylene High Pressure

Low Pressure

Abandoned Pipes

City High Pressure

Not Gassed Laid

Abandoned Pipes Sold

Medium Pressure

PROPOSED DISTRIBUTION MAINS Standard

Common Trenching

Relay

DUCTS AND SLEEVES Duct

Horizontal Bore

Sleeve

Road Crossing

Concrete Slabs

GATE STATIONS AND REGULATOR SETS High Pressure

Polyethylene High Pressure

Medium Pressure

Fremantle High Pressure

City High Pressure

Medium-Low Pressure

Pressure Reducing Station

Gate Station

L.P.G. Tank

VALVES High Pressure

High Pressure Service

Abandon Valve

Isolation Valve

Main

Service

FITTINGS Gas Syphon

Coupling

Expansion Joint

Main Cross A

Reducer

Stopple

Flange

Change Node

Threadolet

Tapping Band

Bend

Elbow

Monolithic Joint

End Cap

Tee

Insulation Joint

Transition

3 Way Tee

F

Abandon Fitting

PROTECTION DEVICES T

A

Test Point

P

Potential Monitoring

FS

Foreign Structure Monitoring

Odorant Sampling Point

E

Earthing

IJM

Insulation Joint with Mitigation

Pressure Monitoring Point

EM

Earth with Mitigation

Anode

GB

Impressed Current Groung Bed

Bond Wire

FEATURES SC

Side Card See Details

NC

Obstacle

Miscellaneous Line

Main Not Connected

Reference Line

SV

Service Valve

Pipe Location Sign

Easement

OLS

Offline Service

Scanned Image

Fence

PLS

Pre-Laid Service

Gas Pit

Kerb

PLSS

Pre-Laid Service Stairs

Gas Indicator

Building

EoM B/L End of Main Building Line

EoM CoD

End of Main Change of Direction Peg

DELIVERY POINTS Service Point

Gas Meter

Gas Meter Set

FEATURE POLYGONS Hard Digging

Proving Location

Licensed Areas

Not Gassed - Mains Laid

Pressure System Upgrade

Local Govt. Auth.

/General/Assetview Symbols Sheet.dgn GD RF 0080

Issue : December 2010




















243  D1 41

RD

109  D1 22

110  D1 20

CAVALIER CT

112  D1 16

111  D1 18

THORNLIE 

126  D1 13 EOM ON BL

125  D1 11

113  D1 14

124  D1 9

114  D1 12

115  D1 10

C PV

 128

122  D1 5

123  D1 7

3

129  D1 6

130  D1 4

120  D1 51

133  D1 59

50

1

 !

119  D1 49

C PV

5 1.

20 PV C

M

LP 20 P V

259

260  D1 50

 C

261  D1 48

262 46

255  D1 13

C PV 50 SO

258  D1 19

 Scale: 1:1,500  Location: 5 Castle Ct  This plan is issued subject to that Important: Please read all warnings, conditions and information on the attached “Underground Asset Details” information sheet.

information and those conditions and warnings (including, but not limited to, the “NO HOT WORKS” warning). Plans are current for only 30 days  and follow safe work from date of request, indicative only and not warranted to be accurate. It is your responsibility to carefully locate underground assets practises and procedures (eg pot-holing). WA Gas Networks will seek compensation for damage caused to assets.



265  D1 40



257  D1 17

54

56

R AL D

264  D1 42

263  D1 44

256  D1 15

 

Map Tile: 1 Date: 17/05/2011

REG

C PV 278 20

277

247  D1 49

LP .5 M VC 1 P 0 8

 !

80

276  D1 58

246  D1 47



   OLS D1 52

131  D1 2

132  D1 57

Sequence No: 21504686 Notification/Job No: 4671224

118  D1 4

245  D1 45

94  D1 5

92  D1 1

8

12.5

117  D1 6

121

C PV 50 MLP 1.5

 

0

116  D1 8



GRENAD IER DR 80 PVC 1.5 ML P

244  D1 43

93  OLS D1 3

CASTLE CT

20

service line runs

Meters 25

95  D1 7

R

EOM ON BL

96  D1 9

D

105  D1 25

97  D1 11

AL

107  D1 29

106  D1 27

104  D1 23

103  D1 21

101  OLS D1 17 50 PVC 1.5 MLP

EG

102  D1 19

98  D1 13

100  D1 15

R

C PV P 50 ML 1.5 91

80 PV C1 .5 M LP RE GA LD R

S EN OV



253  D1 9

254  D1 11

M 1.5

DR

N

269  D1 12

271  D1 1

270  D1 10

272  D1 3



Copyright 2010



/ 



252  D1 7

LP

IG RE VE

268  D1

266  D1 38








WATER CORPORATION UNDERGROUND ASSET DETAILS

629 Newcastle Street Leederville, WA, 6007 PO Box 100 Leederville, WA, 6902 www.watercorporation.com.au (08) 9424 8115

Requestor details Mr Phil Taylor LJ Hookers Shop 9 1 Holmes St Southern River Wa 6110 0893984000 Phone: 0402487578 Mobile: 0893980176 Fax: Email: southperthrealestate@gmail.com

Sequence No: DBYD Job No: Enquiry Date: Issue Date:

21504684 4671224 17/05/2011 17/05/2011

Address

5 Castle Ct Thornlie WA 6108 115.96218 -32.0648 435C7

Requested location details

GPS X Coordinate GPS Y Coordinate Map Ref

Note: The response for this enquiry has been interpreted from details in the picture location only.

Water Corporation asset impact PIPELINE FOUND The area you requested contains one or more pipeline(s). See attached documents.

Important 1. 2. 3. 4.

Plans show approximate location only – verify location by potholing before using powered machinery. Please read all information and attachments. All documents must be kept together and retained on site by the work team. This information is valid for 30 days from date of issue.

Rev 14/10/10


Scale:

1:750

Centre Point: 115.962째, -32.065째

Sequence No: 21504684 Print Date:

17/05/2011 Page: 1 of 1

Water

The Water Corporation has taken due care in the preparation of this map but accepts no responsibility for any inaccuracies or inappropriate use. This plan may be reproduced in its entirety for the purpose of site work planning but shall not otherwise be altered or published in any form without the permission of the Water Corporation. The Water Corporation may need to be advised of any planned ground disturbing activities near facilities on this map. Refer to Brochure - "Protecting Buried Pipelines". Please report any inaccuracies to Spatial Information Management Group on (08) 9420 2068.


Scale:

1:750

Centre Point: 115.962째, -32.065째

Sequence No: 21504684 Print Date:

17/05/2011 Page: 1 of 1

Sewer

The Water Corporation has taken due care in the preparation of this map but accepts no responsibility for any inaccuracies or inappropriate use. This plan may be reproduced in its entirety for the purpose of site work planning but shall not otherwise be altered or published in any form without the permission of the Water Corporation. The Water Corporation may need to be advised of any planned ground disturbing activities near facilities on this map. Refer to Brochure - "Protecting Buried Pipelines". Please report any inaccuracies to Spatial Information Management Group on (08) 9420 2068.


Plan Legend (summary) INFORMATION BROCHURE This legend is provided to Dial Before You Dig users to assist with interpreting Water Corporation plans. A more detailed colour version can be downloaded from www.watercorporation.com.au. WARNING - Plans do not always show all pipes and associated equipment at a site or their accurate location. Pothole by hand to verify asset location before using powered machinery. WATER, SEWERAGE AND DRAINAGE PIPELINES CRITICAL PIPELINE (thick line) EXTRA CAUTION REQUIRED A risk assessment may be required if working near this pipe. Refer to your Dial Before You Dig information or call 131375.

CANNING TRUNK MAIN

100AC

GEYER PL P.M.

AG47

Pipes are not always labelled on plans as shown here – assume all pipes are significant and pothole to prove location and depth. P.M. pressure main M.S. main sewer R rising main (i.e. drainage pressure main) Common material abbreviations: AC asbestos cement e.g. 100AC NOTE: AC is brittle and is easily damaged. CI cast iron GRP glass reinforced plastic P PVC - class follows pipe material (e.g.100P-12) RC reinforced concrete S steel VC vitrified clay

450RC 50 R 147.8

NON-STANDARD ALIGNMENT Pipes are not always located on standard alignments due to local conditions. (i.e. Other than 2.1 m for reticulation mains and 4.5 m for distribution mains.)

(3.0)

MWA12345 or PWD12345 or CK43

CONC ENC

OTHER PIPE SYMBOLS Other numbers or codes shown on pipes are not physical attributes. These are Water Corporation use only. CONCRETE ENCASEMENT, SLEEVING AND TUNNELS May be in different forms: steel, poured concrete, box sections, slabs.

150P

225SU

20.0

5.0

100S SL

150AC

CHANGE INDICATOR ARROW Indicates a change in pipe type or size. e.g. 150mm diameter PVC to 150mm diameter asbestos cement (AC). PIPE OVERPASS The overpass symbol indicates the shallower of the two pipes.

150DAV

250PRV 100SC

VALVES Many different valve types are in use. Valve may be in a pit or have a visible valve cover. There may be no surface indication. Valves may be shallower than the main or offset from it. e.g. A scour valve (SC) may have a pipe coming away from main pipeline on the opposite side to that indicated on the plan.

DOC ID:3374003 VERSION: 8/6/2010

Page 1 of 2


FIRE SERVICES 100 mm polythene domestic (DOMS) service FS Fire service FHS Fire hydrant service Hydrant may be visible external to the building. Even if not visible a substantial fire service may still be present.

100P-DOMS 100S FS

PIPE BYPASS Bypass will not be on the same alignment as the main pipeline.

150S-5

T WIRE CABLE

TR

A

ACCESS TEE OR MANHOLE OR SERVICE ACCESS PIT NOTE: Opening any manhole or pit is dangerous and is prohibited. Below ground. May not be any visible signs at ground level or may be located in a pit.

SAP

MH

WASTEWATER ACCESS CHAMBERS (MANHOLES) -Manhole (shown not labelled) -Tee or maintenance shaft (shown not labelled) MS maintenance shaft (labelled) WARNING: Opening any manhole or pit is dangerous and is prohibited.

MS

26.24 V1234 7.0 ASE 2.0 FSW

CATHODIC PROTECTION (CP) Buried CP equipment may be located some distance from the pipeline being protected interconnected by buried cable. All CP fittings may not be visible. A buried anode – various sizes and configurations TP test point - may be visible on a post or in-ground TR transformer rectifier

4.01 0438 4.2 FE 1.0 FN

WASTEWATER MANHOLE INFORMATION BOXES Square non-trafficable Do not drive vehicles over or place loads. Round trafficable In general if not located in the road treat as if non-trafficable.

HAZARDOUS MANHOLE Indicates a potential health hazard from risk of exposure to toxic waste. WARNING: Opening any manhole is dangerous and is prohibited. FLOWMETER Various types of flow meters located in a pit. May be labelled with identifier. (e.g. 50 MFM, 50MM) STANDPIPE, WATER SAMPLING POINT (WSP), WATER SUPPLY POINT (WP) May be located adjacent to mains. Usually there will be some visible indication. WSP

WP Hydrant Hydrant Tee Pillar hydrant

PH

Lot 1 Lot 2 Lot 3 Lot 4 Lot 5

D

FL

FM

FRL

SOUTH PERTH PS1

3.9 1:2.7 OE 444.8

Water Corporation

R

May not be visible. May not be visible. Visible

PRE-LAID SERVICES D Deferred FL Fully Prelaid Left FM Fully Prelaid Front Middle FR Fully Prelaid Right L Left R Right

Code indicates on which side of a lot the water service is located: May be no visible indication at site.

SEWER OR DRAINAGE PUMP STATION Several pipes and a pressurised main will be in the vicinity.

OPEN CHANNEL OA Landscaped OE Normal Open Earth OF Open channel with flood levee OH Half Pipe OL Lined Channel OS Swale-Shallow Depression OW Natural Water Course DOC ID: 3374003 VERSION: 8/6/2010

Drainage structures, even if dry, must be kept clear of any obstruction such as sand stockpiles.

Page 2 of 2


Protecting Buried Pipelines INFORMATION BROCHURE Important Information for Anyone Planning to Work Near Water Corporation Pipelines Pipeline damage can be expensive, hazardous and highly disruptive to the community. If you are a planner, constructor, supervisor, excavator or work in a similar role this brochure has important information to help you plan your site work and ensure that Water Corporation pipelines are not damaged. All buried pipes must be visually identified before using powered machinery.

About Water Corporation pipelines The Water Corporation operates vast water, sewerage and drainage pipe networks throughout WA. At any given location there may be multiple pipes in the ground of different sizes, depths, alignments and materials. Many pipes operate at high pressures and flow rates. The sudden release of large volumes of water under pressure may be dangerous to people in the vicinity and could lead to significant damage and community disruption. Water reticulation mains are present in most streets with individual property services connected to these mains. These property services may be located by finding the property water meter. Property services are not marked on plans, however their presence should be anticipated. Sewer Gravity Mains, Sewer Property Services and Drainage Gravity Mains are present in many streets and are often within property boundaries. Gravity mains may be located by the presence of an access chamber or manhole along the line of the sewer. Sewer property services are not marked on plans however their presence should be anticipated. See “Private Property” below for more information. Other assets associated with pipes are: anchor and thrust blocks, sampling points, valves, valve pits, cathodic protection systems, underground tanks, manholes, and flow measuring equipment. Interfering with or damaging these assets can be hazardous. Some pipes operate at high pressures and volumes, and hazardous gases may be present.

How pipelines can be damaged Pipes may be damaged by common construction activities such as excavating, drilling, boring, compaction, piledriving, movement of heavy loads, and operating cranes and vehicles. Any damaged must be reported on 13 13 75 (24 hrs).

How to avoid damage Damage can be avoided by carefully planning and conducting the work. Apply the 4-Ps: Plan - Pothole Protect – Proceed.

1 - Plan Before starting site work, request plans from the free Dial Before You Dig service. Plans usually will be provided within 2 days. (Mailed responses may take longer.) Read and fully understand the plans and any other information provided. Assess the risks and plan your work to avoid damage and other interference. Use this table as a guide: The Water Corporation must be notified prior to starting work in some instances – see over. 2 - Pothole Pothole by hand and visually confirm pipe location and depth before excavating with powered machinery. Pipes are not always at the exact location shown on plans. Will the work possibly… ?

Examples

a) cause direct contact in any way with a pipeline (including any minor contact with the protective coating)

Scraping with an excavator bucket or directional drilling head.

b) involve digging near to pipe or otherwise disturbing pipe foundations, bedding or other support

A crossing over or under a pipe.

c) cause subsidence of a pipeline, supporting material or structures

Excavating long or deep close to a pipe.

d) cause high loads to be applied to a pipeline or soil cover

Heavy vehicles and material stockpiles.

e) result in high impacts, shock or vibration near to or directly on a pipeline

Heavy vibratory compaction, piledriving, blasting & dropping heavy loads

f)

limit access for future works Installing facilities too close or maintenance to pipelines.

g) cause electrical currents to be applied to induced in a pipeline

Trenchless underground power installation.

h) interfere with cathodic protection systems

Direct damage to cables or affecting voltage potentials

3 – Protect Use the appropriate measures to prevent pipe damage such as:     

Conducting a detailed utilities survey Choosing an alternative excavation or drilling site Marking the assets using flags, markings, barricades, signs, or bunting Choosing appropriate equipment and ensuring it will be used with care Choosing site specific work methods such as excavation planning, supervision, use of spotters,

DOC ID: 2627750 VERSION: 18/3/2010

Page 1 of 2


 

hand digging and shoring. Engaging the Water Corporation for site assistance if necessary (charges apply). Ensuring site workers are aware of pipes and protection requirements.

4 - Proceed After you have completed the planning and preparation and have established the steps to prevent damage you can proceed – carefully. Continue to monitor work for changes.

Notification of Intention to Work Near Water Corporation Pipelines If you intend to excavate or do other ground disturbing work near Water Corporation pipelines listed below it is strongly recommended that you notify the Water Corporation. Contact 13 13 75 at least 5 working days prior to the work commencing to discuss plans with a technical advisor. The technical advisor may require a damage risk assessment. This will usually be conducted in a face-to-face meeting at one of our offices. In straight forward cases the assessment may be conducted over the phone. This risk assessment will enable you to be better prepared to undertake the work without causing damage. WHEN NOTIFICATION IS REQUIRED MINIMUM ENCROACHMENT LIMITS (To pipe centreline)

TYPE OF PIPE

PIPE SIZE

3m

Water main

300mm dia or greater

2m

RC or AC water main

All sizes

3m

Sewerage pressure main

All sizes

3m

Drainage pressure main

All sizes

Pipe crossings or other ground disturbing work

Very heavy vehicle crossings other than on established (i.e. permanent) roads. n/a

All pipe types above

All sizes

Gravity sewers, junctions or risers, or drainage pipes

All sizes

Underground power work 1m 0.5 m

(crossings) (parallel)

Working near key infrastructure Distance self determined – depends on extent of the work (Use distances above as a minimum.)

Any pressurised sewer, water or drainage pipes.

All sizes

EXTRA CAUTION REQUIRED when working near PRESSURE PIPES near KEY INFRASTRUCTURE such as major roads, bridges, or railway. Damaged pressure pipes can undermine foundations and damage key infrastructure. Ground disturbing work – any activity which causes significant disturbance to the ground. This includes but is not limited to open trench and trenchless excavations, ground anchor installation, ground penetration deeper than 500mm, the use of vehicular compaction equipment (i.e. not hand-operated equipment), storage or movement of heavy loads. Pipeline types, sizes and materials are indicated on Water Corporation plans. Many large pipes are also labelled such as “Serpentine T.M.” (trunk main) or “Armagh St Sewer P.M.” (pressure main). Crossing - includes installation / construction by open trench or trenchless methods, and installation of soil anchors. RC - reinforced concrete AC - asbestos cement

For assistance with information on Water Corporation assets supplied through Dial Before You Dig call 13 13 95 between 8 am and 5 pm weekdays. On-site locations - If you cannot locate a Water Corporation asset on-site call 13 13 75 (all hours) to request an on-site location which may be arranged where possible. Charges apply. See also Underground Service Locaters in the Yellow ® Pages . Private Property - For additional information about private services contact 13 13 95 between 8 am and 5 pm weekdays. Plans of a private property sewers may be available at cost from any Water Corporation Business Office or the Master Plumbers Association. Building approval is required from the Water Corporation for new buildings, building improvements, parapet walls, retaining walls and swimming pools. The service pipe between the water meter and the house or external tap is the owner’s responsibility. It is recommended that this pipe be located by hand digging.

Further information •

Dial Before You Dig: www.1100.com.au

Guidelines for Working Near Water Corporation Pipelines. Available from www.watercorporation.com.au. (Look under Your business - Working near pipelines.)

Utility Providers Code of Practice for Western Australia. Available from: www.mainroads.wa.gov.au/UsingRoads/RoadTrafficInformation/Pages/WorksOnMainRoads.aspx

DOC ID:2627750 VERSION: 5/4/2011

Page 2 of 2



5 Castle Court, Thornlie