Page 1

Exterior Guard Plate

Profile Cylinder Design

Protects the cylinder against many forms of attack, including drilling, wrenching and prying.

Unique design protects against pulling.

Thru-bolted for added protection.

Interior thumbturn or keyed both sides (double cylinder) available.

Available Finishes

Standard keyway or high-security (Medeco, Mul-T-Lock) available.

Satin Chrome (626) Satin Brass (605)

Includes a hardened steel layer. Steel Encased Mechanism

Interior Trim Styles

Factory Assembled 15-Year Guarantee Internally Gear Driven Wood Doors 4100 Series Hollow Metal 2-¾" Backset Doors Single (Interior Thumbturn) or Double (Keyed Both Sides) models

Spring Loaded For Easy Operation

Multiple Point Locking vs. Multiple Locks On The Door Multiple locks are typically located on one edge of the door. A burglar need only pry on the lock edge in order to break through the way the locks are fastened to the frame.

Makes your door as strong as the adjoining wall & frame One 4 point lock is all you need for break-in protection.

Exiting is time-consuming and potentially hazardous as one must do several actions in order to unlock all the locks.

Exiting is quick and easy as one turn retracts all the bolts in one motion. Use a standard mortise or cylindrical latch lock for standard locking.

How To Order:

INTEGRA-LOCK™

Safe Exiting Hazard

And if all of the locks are not in the same position to start, unlocking can be complicated by figuring out which locks are locked and which are open!

Suitable for steel and wood doors Mechanism and bars installed within the door Special doors are not required May be field-installed on factory prepped doors without special training Field installation on non-prepped doors available by factory trained technicians Templates available at www.securitech.com

4200-M1-51-LH-605-HM-U-P-______ A B C D E F G H I

A: MODEL (4200, 4100, 4100X[no exterior operation]) B: CYLINDER/KEYWAY INFO (A=ARROW, M=MEDECO, S=SCHLAGE "C", "T"=MUL-T-LOCK, Y=YALE) FUNCTION (1=SINGLE, 2=DOUBLE CYLINDER) C: # OF PINS (5 OR 6) (SOME CYLINDERS ARE ONLY AVAILABLE ONE WAY. USE "X" FOR MUL-T-LOCK. DOOR THICKNESS (1=1-3/4" thru 1-7/8", 2=2" thru 2-1/8") D: DOOR SWING (LH, LHR, RH, RHR) E: FINISH (605=POLISHED BRASS, 626=BRUSHED CHROME) F: DOOR TYPE (HM=HOLLOW METAL, WD=WOOD, KL=KALAMEIN, SI=STEEL INSULATED) G: DOOR EDGES (U=TOP & BOTTOM U-CHANNELS, F=TOP & BOTTOM ARE FLUSH, M=MIXED) H: FRAME (P=FACTORY PREPARED FOR STRIKES, N=RETROFIT [NO PREP], W=WOOD) I: SPECIAL KEYING INFO, DOOR SIZE IF OVER 3'0"X7'0", ETC.

made in usa by (800)622-5625

SECURITECH GROUP, INC. 54-45 44th St. (718)392-9000 (718)392-8944 fax

Maspeth, NY 11378 www.securitech.com

Integralock Options  
Integralock Options