Issuu on Google+

SecPoint®Portable Penetrator – Virtual Edition Installation Guide Rev. 3.0 – Portable Penetrator® 22.5 and newer.

Thank you for choosing Portable Penetrator – Virtual Edition. This guide will help you through the process of downloading,installing and configuring the software. Please read the these instructions carefully and make sure that you are following each and every step exactly as mentioned in this guide. Otherwise you may not be able to run the software. For Troubleshooting please check the Troubleshooting Section of this Guide.

During installation:


Portable Penetrator Installation Guide

1. You’ll need the Unit ID. Please make sure you do have the unit ID/License ID. A Unit ID consists of a 10 digit alphanumeric code and looks like this example: ExAmPle123 2. You’ll need to Login to VIP Lounge. This is necessary to download the software. Please make sure you do have your login credentials for the VIP Lounge, or alternatively your unit ID. If you didn’t receive your login credentials for the VIP Lounge, you may use your unit ID,or you may contact your reseller or send an e-mail to support@secpoint.com to get them.

Software Download Please follow the login instructions in one of the boxes below. The final result will be the same.

If you have VIP Lounge Userid – Password Go to this link: https://vip.secpoint.com and type your VIP Lounge login credentials. Once you have successfully logged in, click on the button Download Software (on the right side of the screen) .

If you have only your Unit ID Go to this link: https://vip.secpoint.com/secpoint/download.php and type your Unit ID. Once you have successfully logged in, you will be redirected to the download page. This page will show the Portable Penetrator’s download choice.

You will be redirected to the download page, that will show the Portable Penetrator’s download choice. If you also purchased a Protector, you will see the download choice of both products.

Click on Download Penetrator / Portable Penetrator for Laptop or Server to open the download window, as shown in the picture below.

Copyright © 1999-2014 SecPoint

Page 2 of 11


Portable Penetrator Installation Guide Just like a Microsoft Word document file runs on Microsoft Word, the same way the Virtual Edition of Portable Penetrator runs on VMWare Player. Therefore you need to download and Install: 1. VMWare Player (Click on Download VMWare Player to download) 2. Portable Penetrator Software (click on Download Portable Penetrator Part 1/2 and then on Download Portable Penetrator Part 2/2 to download) The Portable Penetrator software is a large file, so you will find it packed and split into two .rar files. The two software parts must be unpacked using Winrar. If you don’t already have it installed on your computer, you can download it from here, clicking on Download Download Winrar.

Copyright © 1999-2014 SecPoint

Page 3 of 11


Portable Penetrator Installation Guide Installation VMWarePlayer installation Launch the VMware-player executable file you have downloaded. This will install the VMWare Player on your Computer. The VMWare Player is free to use.

Portable Penetrator installation You can either follow this guide or watch this video: http://www.youtube.com/watch?v=mPxSRboqNJw

Once you have installed VMware Player, launch it, and you will see the welcome screen.

Copyright Š 1999-2014 SecPoint

Page 4 of 11


Portable Penetrator Installation Guide 1) Open a Virtual Machine, select Portable Penetrator file from the location you saved it in.

2) Click on Machine to start the software

Play

Virtual

3) It will ask if the virtual machine is Copied or Moved. Select I moved it. If you select the other choice by mistake, please restart from step 1.

Copyright Š 1999-2014 SecPoint

Page 5 of 11


Portable Penetrator Installation Guide 4) Once you have started up your virtual machine, this is your Desktop. You are now on the Operating System where the SecPoint® Portable Penetrator is already running.

5) To go to the Portable Penetrator’s web interface, click on either Firefox or Google Chrome. They are both set up to load the login page of the Portable Penetrator, but before this happens, a warning page will appear, as shown below. Click Proceed anyway to continue. This message may vary depending on the web browser you are using

Copyright © 1999-2014 SecPoint

Page 6 of 11


Portable Penetrator Installation Guide 6) The first time you login to the Portable Penetrator, you will see the initialization page. Here you must type your Unit ID, for example ExAmPle123 and click Initialize. Make sure that you don’t type any blanks before or after the unit ID. If you mistype your Unit ID you will not be able to activate your license. You can repeat the activation process by pointing your browser to https://127.0.0.1/login.php?query=init

Copyright Š 1999-2014 SecPoint

Page 7 of 11


Portable Penetrator Installation Guide 7) Finally, you will be redirected automatically to the login window. From now on, each time you want to login to the Portable Penetrator’s web interface, you will get to this login window. Here you can login with user admin and your Unit ID (for example ExAmPle123) as password.

The Portable Penetrator’s login page can be reached at https://127.0.0.1/login.php from within the VMware virtual machine. The Portable Penetrator’s default IP address is 192.168.1.2, so, once the VMWare virtual machine has started, you can login to the Portable Penetrator by just pointing your browser to https://192.168.1.2/login.php from the host Operating System (Windows) without going into the virtual machine. The same can be done from another computer in your LAN. When you login to the Portable Penetrator from your host OS or from another computer, you must first add your computer’s IP to the list of authorized IPs. You can do this by pointing your browser to https://192.168.1.2/adminip/ . Here you must enter the same login information as on step 7.

Copyright © 1999-2014 SecPoint

Page 8 of 11


Portable Penetrator Installation Guide Please Note: Once you first run the software, the license will be Not active until it gets online and activates. How to get online if the Portable Penetrator doesn’t have access to the Internet: 1. Make sure VMware is set to Bridge mode: Go to menu Virtual Machine > Virtual Machine Settings of your VMWare. Here, set the Network to Bridged mode. 2. Go to the Penetrator’s web interface and click Network > IP, Gateway & DNS 3. Change the IP settings according to your Network. Click OK and wait for the Portable Penetrator to activate new settings. 4. Click on System Status: Perfect / Not Good (on the right side , in Penetrator Information) and check that the Penetrator Online status is OK. 5. Click on on the right part of the screen to connect to the update server and activate the license. 6. If the License cannot be activated, please go to menu Update > Force Database Update and click OK. If you still can’t update, please contact Support. It is recommended that you keep your Portable Penetrator always up-to-date, to get the maximum from new features. Please download a new firmware whenever it’s available. You can read the change log at http://www.secpoint.com/latest-penetrator-firmware.html

Live Chat and Remote Support If you have any issues, please visit http://www.secpoint.com and Click on the Live Chat support image on the Top Middle section. Please note that we provide remote support using TeamViewer. Please Make sure you have the latest version of Teamviewer installed. You can click here to download TeamViewer

Copyright © 1999-2014 SecPoint

Page 9 of 11


Portable Penetrator Installation Guide Troubleshooting •

If you have any problems to get your Portable Penetrator to connect to the internet: Login to the Portable Penetrator, then go to Network > IP, Gateway & DNS. Here you can configure the IP address so that it fits your network settings.

If you get a black screen and the text EOFEOF when you startup the virtual machine: It can be because the Vmware virtual machine did not close correctly. To solve it: VMware player/workstation: Please click the Vmware menu and click Ctrl+Alt+Del VMware Esxi: Right click on the VM – mark Guest click Send Ctrl+Alt+Del

VMWare Tools: If the VmWare software asks you if you want to upgrade to the latest VMware tools, please select NO and Never Remind again. The tools are already included and upgrading to a newer, untested version, may cause software issues.

Firewall: If you have a firewall blocking the outgoing traffic, please make sure to whitelist the website https://update.secpoint.com, TCP port 443. This is the server used to keep the Protector up to date.

License Expired: If the Portable Penetrator says that the License is expired, just after installation, it means that you need to go online and get the latest update so you can activate your new license. Click on on the right part of the screen to connect to the update server and activate the license.

If you need any help, please email us at support@secpoint.com or visit http://www.secpoint.com and click the live chat image on top.

Copyright © 1999-2014 SecPoint

Page 10 of 11


Portable Penetrator Installation Guide Training Videos Launch Exploits : http://www.youtube.com/watch?v=bMKzohhUNCI How to do Range Scan : http://www.youtube.com/watch?v=zyF4e885nCY How to launch Wi-Fi Bomb : http://www.youtube.com/watch?v=MxA4NSOVnAA Spoof Mac Address Wi-Fi : http://www.youtube.com/watch?v=SCp6qNFZ6IQ Different Antenna : http://www.youtube.com/watch?v=ebqmmZTWI2A Setup wizard penetrator : http://www.youtube.com/watch?v=K5Q9zaqKYNI How to start scan : http://www.youtube.com/watch?v=dTg7eQ3ogP4 WPA WPA 2crack video : http://www.youtube.com/watch?v=CoZpoahF2As WEP crack video : http://www.youtube.com/watch?v=Vk3cKvAYdN0 Portable Penetrator Wi-Fi Antenna guide - VMware Workstation : http://www.youtube.com/watch?v=fBe9acvsUtE How to connect Wi-Fi Antenna for Windows7 : http://www.youtube.com/watch?v=86TFHIk29Po How to connect Wi-Fi Antenna for Mac OS X : http://www.youtube.com/watch?v=hb25HkAxmws

Copyright Š 1999-2014 SecPoint

Page 11 of 11


Portable penetrator vmware player setup guide 3 0