Page 1

ACTION TAC Ready­to­use vinyl application fluid for applying pressure sensitive vinyl and decals to most surfaces. 

Less aggressive than other fluids

Will not attack transfer tape or cause separation

One product for all grades of vinyl

A great prep and cleaning agent – One product does the Whole Job

Less Clean­Up Residue

Excellent Pricing

Smells Good, No Harmful Odors

Works Great!

Landor UK Ltd 51 Clarence Road, Fleet, Hampshire, GU51 3RY Tel: 01252 624 411 Fax: 01252 623 411 Email: info@landoruk.com Web: www.landoruk.com


ACTION TAC Application Techniques Ideal temperature for applying vinyl is above 40 degrees Fahrenheit. Lower temperature slows the set up time.

1) Clean surface with Action

2) Place lettering (copy) on surface.

Assume that every surface is dirty and that it should be cleaned thoroughly before any transfer is made. Action Tac is an excellent cleaner and prep agent.

3) Remove backing then spray surface with Action Tac.

4) Lay copy on wet surface and squeegee down.

5) After 1 minute (approx.) saturate tape, squeegee once more.

6) Carefully remove transfer tape, pull down at 45 degrees.

A clean surface will usually result in a good transfer.

7) Complete transfer by wiping area dry. Landor UK Ltd 51 Clarence Road, Fleet, Hampshire, GU51 3RY Tel: 01252 624 411 Fax: 01252 623 411 Email: info@landoruk.com Web: www.landoruk.com

action-tac  

Less aggressive than other fluids Will not attack transfer tape or cause separation One product for all grades of vinyl Excellent Pricing La...