Issuu on Google+

P.O. Box 40397 Charleston, SC 29423-0397 USA V 1-843-886-0094 F 1-843-886-3701 Toll Free 1-888-253-2778 www.marabu-northamerica.com

PRODUCT DATA SHEET Date: January 16, 2008 Product Name: ClearShield速 Clear UV Protective Liquid Laminate Anti-Graffiti Coating Product type: Suggested Use:

Clear UV, Chemical Resistant, Graffiti Resistant Topcoat Topcoat Interior: X Exterior: X

PRODUCT DESCRIPTION CLEARSHIELD速 ANTI-GRAFFITI COATING is a formulated air-dry coating with excellent chemical resistance. It is well suited for high performance applications where hardness, flexibility and abrasion resistance is required. This coating also has excellent ultraviolet light resistance thereby permitting use in severe exterior applications. ClearShield Anti-Graffiti may be cleaned with a range of solvents including our CitrusBased Graffiti Remover (R4001). Other commercial cleaners such as Goof-Off are suitable.

PHYSICAL PROPERTIES Viscosity: 15 seconds Zahn # 3 Weight per Gallon: 8.1 lbs. Non-Volatile by Volume: 31% V.O.C: 1.5 lb/gal. (180 g/L) Sheen: Gloss Shelf Life: 1 year

48 seconds Zahn #2

SUGGESTED APPLICATION DATA Substrate: Steel, Aluminum, Plastic, Vinyl, Paper, most solvent-based ink jet output. Always test ink and substrate combinations to insure adhesion and compatibility of clear to ink. Application Method: Spray, Foam Applicator, Roller (High Density White Foam) Application Viscosity: use as supplied Reducer: Water if needed. Mils Wet: 2.8 Mils Dry: 1 Coverage: 450 square feet per gallon at 1 mil dry film (100% efficiency)

ClearShield Anti Graffiti

1


CURE SCHEDULE

Air Dry: X Temperature: @ 80°F Dust Free: 20 min. Dry to Handle: 60 min. Recoat: 30 minutes

SPEED OF DRY DEPENDS ON RELATIVE HUMIDITY AND AIR MOVEMENT SPECIAL CONSIDERATIONS:

KEEP FROM FREEZING ONCE ACTIVATED POT LIFE IS 4 HOURS

TYPICAL PRODUCTS THAT MAY BE CLEANED FROM A SURFACE COATED WITH ANTI-GRAFFITI Most common aerosol spray paints. Enamels will be more difficult to remove than lacquers. Finger Nail Polish Latex Paints Ketchup Sharpies – trace shadowing may be present after cleaning.

CHEMICAL RESISTANCE OF THE CURED DRIED FILM APPLIED AT A MINIMUM OF 1 MIL DRY Chemical Resistance (10 min. spot test)1 Ethanol

Slight softening, recovers

Methanol

Slight softening, recovers

Isopropanol

No Effect

Acetone

No Effect

Toluene

No Effect

1,1,1-Trichloroethane

No Effect

Gasoline

No Effect

1

1.0 mils dry films conditioned at 140° for 30 minutes, applied to Bonderite 1000 panels.

ClearShield Anti Graffiti

2


1 N NaOH

No Effect

Ammonia, 5%

No Effect

Fantastic

No Effect

1 N H2SO4

No Effect

IBM Cleaner

No Effect

Formula 409

Slight softening, recovers

2% Spic N’ Span solution

No Effect

MEK, double rubs

200+

Cleveland Cabinet Humidity Resistance (100°F, 100% RH, 100 hours) Rusting (ASTM D610)

No Effect

Blistering (ASTM D714)

No Effect Salt Spray Resistance (5% NaCL, 95°F, 100 hours)

Unscribed Rusting (ASTM D610)

No Effect

Blistering (ASTM D714)

No Effect

Scribed

Rusting (ASTM D610)

No Effect

Blistering (ASTM D714)

Few, no. 4

Undercutting

1/8 inch

(1.0 mil dry films air-dried seven days)

Metal Plastics ClearShield Anti Graffiti

3


Bonderite 1000

Excellent

Lexan

Excellent

Untreated Cold Rolled Steel

Excellent

Noryl

Selective*

Untreated Aluminum

Excellent

ABS

Excellent

Anodized Aluminum

Excellent

Styron

Selective*

MANUFACTURER INFORMATION

Marabu North America PO Box 40397 Charleston, SC 29423 1-843-886-0094 1-843-886-3701 FAX www.clearstarcorp.com Statements and methods described herein are based on the best information and practices known to Marabu NA at the time of issue. Procedures are suggestions only and are not to be construed as warranty information or results. It is the user’s obligation to determine whether this product is suitable for the particular use and specific method of application.

ClearShield Anti Graffiti

4


clearshieldantigraffitimna