Page 1

DIGITAL CATALOG SUMMER 2018


CONTENTS From the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Seanic News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Featured Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Standard ROV Tooling . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Engineered Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Centurion Group Portfolio . . . . . . . . . . . . . . . . . . . . . . 120


FROM THE PRESIDENT

Seanic Ocean Systems For those of us that attended Subsea Tieback 2018 in

Our Seanic UK office has become known for being a superb

Galveston Texas earlier this year, I think we can all agree

source to hire a wide variety of ROV and Diver tooling. What

there was a renewed sense of optimism or maybe I should

many may not realize is they are also an excellent source

say cautious optimism within the room. With the price of oil

to provide innovative solutions to your subsea challenges.

pushing past $60/bbl in early December and continuing to

This month we feature a project that allowed our team to

climb in Q1 to $65/bbl, who wouldn’t be optimistic considering

showcase their skills in support of subsea decommissioning.

the extremely low oil prices we’ve seen over the past 2+ years. Several companies I met with had already started to experience increased activity, while others were entertaining new levels of quote activity with hopes that awards would take place in the coming months. But behind all of that optimism there was still a slight concern if prices were actually sustainable throughout 2018. Many worried that the current prices were artificially supported by cuts in international production. Would producers continue to hold down spending as long as possible and use this uptick in prices to improve their profitability? Would near term CAPEX spending be diverted to land based operations/investments versus deepwater? All valid questions, but unfortunately none of us were absolutely sure on what to expect, especially with the choppy market we’d experienced over the previous years. Going into 2018 analysts’ predicted there would be a slight uptick in CAPEX and IMR/OPEX activities across most markets. As we enter Q3 I think that’s been the case in some markets, but clearly not in all. Even though prices have pierced $70/bbl we are once again facing the possibility of increased production across the world making it increasing more difficult to read the tea leaves. We thought this would be good opportunity to highlight our experience in building a variety of subsea panels. From Diver to ROV panels we’ve worked with many of the largest companies in the industry and our panels have been deployed in several markets around the world.

Seanic manufactures our own

buckets, hot stabs and paddle valves that effectively interface

Our feature tool this issue is a Class V Torque Tool. Over the years Seanic has manufactured large quantities of Class V & VII Torque Adaptors for a growing number of customers. We recently delivered a large order of Class V Torque Tools and thought this would be a good time to share some pictures of our new design along with the technical specifications. Since our inception in 2007, our customers have entrusted us to store and maintain some of their most valuable subsea hardware and tools. As the quantities and complexity of those products grew, it became increasing more difficult to manage this effort using spreadsheets. In Q2, Seanic is rolling out an asset management portal that allows our customers access to all of their equipment, reserve assets for future campaigns/ activities and track the status of the tool at any time, from any place. It will also provide a variety of reports improving visibility on past or present maintenance and certifications. In 2016, Seanic opened a new facility in Katy Texas, a suburb of Houston. The 55,000 Sq. /Ft. building on 10+ acres included a 50’ x 50’ x 30’D in ground test tank. Our goal was to attract all aspects of in water testing, from gas tests to diving operations and of course SIT’s that involved ROV’s. Q1 brought several companies to our facility to use that tank for general testing and wet testing their ROV’s before heading into the field. We hope you find this publication beneficial and welcome any feedback you can provide. On behalf of the Seanic employees around the world we want to thank you for your continued support.

with a wide range of industry accepted subsea valves. If you are in need of subsea panels, let us provide you some of the components or supply you with a finished product.

Tom Ayars President 3


WHAT’S NEW AT SEANIC

DESIGN & BUILD OF PANELS Over the last 10 years, Seanic has provided custom engineered ROV and diver-operated panels to subsea customers around the world. Panel designs range from the simple ROV mounted test panels to complex long term subsea installations with multiple functions and a wide array of components. Panels, as simple as they may seem, require a coordinated effort on the part of the design engineer and the end customer to develop an assembly that captures all requirements and meets customer and industry defined specifications.

Seanics

engineering

staff

work

closely

with customers to meet these sometimes demanding requirements and provide cost effective solutions that will stand up to the rigors of subsea use.

installations, or bolded in place so labels can be changed out

Panel components include API standard hot stab and

as the panels is repurposed for other applications.

manifold sets, paddle operated valves of all types, protected

Panels can be designed for long term subsea service, installed

gauges and in some cases customer supplied equipment

prior to or after equipment deployment and fabricated out of

that requires custom engineered solutions to be adapted to

corrosion resistant materials or carbon steel that has been

panel mounting and ROV use. Seanic has ROV operable valve

coated or painted to customer specifications. Intervention

designs for a wide range of valve types and manufacturers.

panels with features allowing for temporary installation by a

Custom labels can be cut directly into the panel for permanent

ROV can be designed to be compact and light weight. Some

4


of these types can be temporarily integrated on the ROV itself. Test equipment and surface gear are also common applications, panels and frame designs can be designed to virtually any customer requirement. Panels can be supplied with or without plumbing as requested by the customer. Seanic employs first rate tubing fitters and fabricators, pride in craftsmanship shows in the finished product. The Seanic team works closely with customers, moving from concept to final design and on to assembly and

• Standard paddle operators that are ROV and installation friendly • Components are designed to be rugged and reliable • Components can be orientated in many configurations to suit the attached valve and application. Please contact the Seanic team for your future panel needs, our sales and engineering staff will assist in providing cost effective solutions of the highest quality.

testing, providing a seamless transition from requirement to fulfillment.

5


ABERDEEN

SEANIC DEVELOPS A UNIQUELY ENGINEERED PACKAGE FOR A SUBSEA DECOM PROJECT With our expertise and proven track record, Seanic was called upon to deliver a unique package of equipment ahead of a decommissioning project in the North Sea. Our Aberdeen based engineers were tasked with creating a diver operated tooling package to condition the top of a spherical condeep storage cell on the Brent Delta platform prior to its decommissioning.

The end solution covered four main stages: • Locating, installing and levelling a central datum on the cells to allow all equipment to be installed on the interface plate and ensure concentricity of operations • Conditioning of the cell top with the orbital milling machine • Core drilling on a set PCD for installation of securing studs • Post tension testing of chemically retained securing studs Seanic performed all testing at our facility just outside of Aberdeen which included, diver training and full procedural demonstration to confirm operations and timings, post tensioning along with destruction testing on retaining studs. The spread of tools were dispatched in bespoke subsea baskets along with a dedicated workshop and parts

The project was the first of its kind and involved polishing the top of concrete storage cells to prepare the surface for installation of baseplates for cell sampling. The orbital milling tool and associated installation equipment was designed to be installed onto the storage cell and mill a circular area of 1.8m diameter to the level, smooth surface required by the customer. From concept to completion of the offshore work,

container, which was maintained and stored at Seanic between offshore campaigns. The work was successfully carried out across the desired storage cells over several campaigns on schedule and without incident. Deliverables included subsea tooling, deck equipment and offshore technicians and engineers over the duration of the project.

the project took over 5 years and Seanic worked alongside

The decommissioning of the Brent Delta provided some

the operator, dive contractors, third party contractors and

significant challenges to the oil and gas industry and Seanic

equipment suppliers to provide a cost effective solution.

is pleased that we could contribute innovative engineered solutions to this phase of the project.

6


7


TEST POOL

POOL PARTY 2018! Increased oil prices have brought increased activity for our state-of-the-art 50 ft. square x 30 ft. deep in-ground test tank. So far this year three ROV operators have brought vehicles to our Katy facility to perform several days of rigorous inwater testing before placing them in service. Our test tank can be hired on a day rate basis for companies looking to test multiple underwater applications. From gas testing to diver SIT’s to heavy hardware, our 2000lbs sq./ft. pool bottom is capable of handling heavier equipment than any other test tank along the Gulf Coast. Features include: • Communications/data connectivity to conference rooms and ROV crew • Dedicated conference and office facilities for customer operations • Multiple HD TV’s to monitor cameras on pool deck, pool perimeter and ROV’s (on system) • All operations can be recorded in HD digital video and edited per clients’ requirements • Support hardware such as HPU’s and ROV tools available on-site

8


9


ASSET MANAGEMENT SOFTWARE Seanic is excited to roll out our new asset tracking software.

Aside from the features listed here, we are able to automate

This robust web portal provides our customers access to

tool usage and monthly inventory reports, often required,

their equipment, stored and maintained at Seanic, anytime

without the hassle of exchanging outdated spreadsheets on

and anywhere.

a weekly/monthly basis and tailor them to fit our customers’

Some of the key features included are: •

100% transparency

Reserve tooling for future campaigns/projects

Scheduled maintenance

Equipment status (Reserved, In Use, In Demob, In Repair, Available)

Equipment induction folders that include: OMM, FAT, pictures, drawings and certs

10

Many more

needs.


FEATURED PRODUCT

CLASS V TORQUE TOOL

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- SURFACE TEST JIG WITH TOPSIDE

Aluminum housing Steel motor

DIGITAL READOUT

Steel gear reduction

-- COMPENSATOR FILL AND DRAIN BOTTLES -- HOSES

17-4 SSTL latching fins Materials

Delrin nose

-- COMPLETE SPARES KIT

Aluminum counter parts

-- SPARE MOTOR

316 SSTL ROV handle 316 SSTL hardware

-- OPERATING & MAINTENANCE MANUAL -- BOX LIFT SLINGS CERTIFIED FOR OFFSHORE LIFT

17-4 SSTL end effectors

Torque Range Weight

Maximum Operating Pressures

2,000-5,000 ft-lbs 275 lbs/163.5 kg (air) 220 lbs/126 kg (water) 2,100 psi @ 10gpm (motor) 3,000 psi (latching fins)

11


STANDARD ROV TOOLING

12


ELECTRIC SMART TORQUE TOOL API 17H CLASS 1-4 Seanic has designed an Electric Smart Torque Tool in the tradition of providing our customers a simple, rugged and reliable product. The tool has a closed loop speed/position control system, allowing fine control and angular position feedback. Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.

ADDITIONAL FEATURES -- CALIBRATED STRAIN GAUGE FEEDBACK WITHIN +/-2% -- INPUT CURRENT LIMITING AND ALARMING -- OPTIONAL COMMUNICATION (ISOLATED RS232, ETHERNET) -- TURNS COUNTER, TORQUE OUTPUT, SHAFT POSITION DISPLAYED TOPSIDE -- SPEED LIMITING ALARMING -- RESOLVER-BASED TURNS COUNTER ACCURATE TO LESS THAN 1/10TH DEGREE OF A REVOLUTION

Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque. As it does not require an HPU for operation, surface testing in the yard or shop environment is easily accomplished. Torque is measured by internal feedback with an accuracy of +/- 2%.

TECHNICAL SPECIFICATIONS Max Torque Output

2000 ft lbs

Length

25 inches

Max Speed

15 rpm

Power

120 VAC at 12.5 A max

Weight (air)

120 lbs

Max Speed

15 rpm

Motor Controls

Start/stop, Direction, Speed, Torque Control Latches disengage when power is lost. Same proven

Fully Automated Hydraulic-

latch design as standard Seanic torque tools. Internal

Actuated Latches

electric-driven HPU circuit provides hydraulic power and control. Torque limited by closed loop motor current and strain

Torque Limiting & Alarming

gauge feedback. Safe Torque Off feature (torque output is immediately disengaged if limit is met). No changes in accuracy or performance due to pressure and temp changes. Single 3/4� hose houses

125:1 Torque Multiplier SOS-TDS-029 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

and protects the cable assembly, replacing multiple hydraulic hoses. Dynamic subsea test jig designed specifically for ETT use available as option.

13


SMART TORQUE TOOL API 17H CLASS 1-4 The Seanic Smart Torque Tool has retained the rugged features of its predecessor and added the technologically advanced features our customers require.

WHAT’S IN THE BOX -- SUBSEA DISPLAY

We have retained the mechanical counter as a backup which allows for failsafe operation if the battery is depleted, but also added a digital display that provides real-time torque and turns both subsea and on the surface, via laptop control. The

-- SURFACE TEST JIG AND READ OUT

tool can be supplied as a stand-alone smart tool or with a proportional valve pack,

-- #8 JIC HOSES (2)

laptop and GUI that can limit torques, control speed and direction and log values.

-- #4 JIC HOSE

Our robust latch system provides confidence that you are securely locked into the

-- COMP BOTTLE WITH FITTINGS -- OPERATING & MAINTENANCE MANUAL

subsea bucket and will stay that way until you choose to disengage. In the case of an unforeseen power failure, our latches are spring-loaded and will retract, allowing you to safely disconnect from the work site.

-- ELECTRICAL SPARES -- MECHANICAL SPARES -- 195CC MOTOR (2) -- 36CC MOTOR (2)

TECHNICAL SPECIFICATIONS

-- 1-4 END EFFECTOR AND TEST STEM -- CABLE BETWEEN TOOL AND DISPLAY

Spring Return Latches

Robust Dogs 17-4 Hardened Fins 110 lbs/50 kg (air)

Weight

85 lbs/39 kg (water) Display in Tenths Large, easy-to-read numbers

Mechanical Counter

Oil-filled, Independently-sealed housing Allows failsafe operation if battery is depleted or display is compromised

SOS-TDS-031 REV A-11132017

14

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HI-TORQUE TOOL API 17H Seanic Ocean Systems has designed an API 17H and ISO 13628-8 compliant hi-torque tool to reliably perform a multitude of subsea applications.

WHAT’S IN THE BOX -- SURFACE TEST JIG WITH TOPSIDE DIGITAL READOUT -- HOSES

Our tool has a removable and exchangeable 17H Class-4 nose that can also be attached to Seanic’s Smart Torque Tool , for a convenient two-in-one functionality. The hi-torque tool is useful in installing umbilicals and flying leads, opening and closing valves on a Christmas tree, and conjunction with Tool Deployment Units (TDUs). A mechanical turns counter, which needs no battery and features highly

-- COMPLETE SPARES KIT

visible numbers for easy monitoring, eliminates the inherent problems commonly

-- 1 HIGH TORQUE MOTOR

associated with electronic digital counters.

-- 1 HIGH TORQUE ADAPTER -- OPERATING & MAINTENANCE MANUAL

TECHNICAL SPECIFICATIONS Mechanical (no battery) Counter Features

Highly visible numbers Displays in tenths Oil-filled, independently sealed housing

Weight

72 lbs/33 kg (air) 55 lbs/25 kg (water)

SOS-TDS-030 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

15


FLYING LEAD ORIENTATION TOOL The Seanic Flying Lead Orientation Tool, or FLOT, is designed and built for ease of operation and maintenance. The tool allows for angular and rotational orientation of a class 4 torque tool to aid in connection of flying leads subsea. Simple design allows for customized configurations. Built-in load holding valves ensure safe and reliable pitch control.

WHAT’S IN THE BOX -- #8 JIC HOSE (2)

The Seanic Flying Lead Orientation Tool (FLOT) provides the operator a durable design with greater versatility and less overall weight, which means you don’t sacrifice valuable payload. Seanic’s FLOT provides the option of roll up to 360° in

-- #4 JIC HOSE (2)

certain configurations, giving you the ability to dock flying leads in the most difficult

-- SPARES KIT

of conditions. This unit has been designed to fit the Seanic’s torque tool, and has

-- OPERATING & MAINTENANCE MANUAL

been customized or retrofitted for compatibility with many industry-recognized torque tools.

TECHNICAL SPECIFICATIONS Materials

316 SS / 6061 T6 AL / Ni-Al-Brz

Dimensions

17”W x 40”L x 14”H

Hydraulic Requirements

Two open-center directional control valves

Max Operating PSI & Flow

Pitch cylinder: 3000 psig at .5 gpm Roll motor: 3000 psig at 1.75 gpm

FLOT Weight

149 lbs/68 kg (air) - 108 lbs/49 kg (water)

Pitch Angle

135° (90° down from horizontal, 45° up from horizontal) 32° either direction (360° optional configuration

Roll Angle

depending on application)

Max Hang Weight on TT

600 lbs

SOS-TDS-010 REV A-11102017

16

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SUBSEA TORQUE VERIFICATION UNIT Seanic Ocean Systems has a subsea verification unit that verifies torque readings of an API 17H Class 1-4 torque tool at depth. This tool is also available as a dual gauge unit, subsea switchable between class 1-2 and 3-4 without the need to change gauges at the surface. Useful when multiple tools are being used that require subsea verification prior to use.

WHAT’S IN THE BOX -- 2,200 FT-LB GAUGE (2)

The unit readily attaches to the ROV cage or TMS to provide a reliable assessment of changes in torque output when adjustments are made, without the need to return to the surface. Our verification unit boasts a two-in-one functionality, as it

-- 500 FT-LB GAUGE (2)

can additionally be used to verify torque adjustments on the surface in place of a

-- TEST STEMS

normal torque tool test jig. Because it is a purely mechanical piece of equipment,

-- OPERATING & MAINTENANCE MANUAL

our subsea verification unit has no electronics to fail, batteries to die, wires to break or electrical housings to flood.

TECHNICAL SPECIFICATIONS 316 L SS Materials

Nickel-Aluminum-Bronze 17-4 SS API 17H Class 1-2 end effector

Interface

API 17H Class 3 end effector API 17H Class 4 end effector

Weight Maximum Input Torque

170 lbs/77 kg (air) 145 lbs/65 kg (water) 2,000 ft-lbs

SOS-TDS-022 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

17


INTELLIGENT VALVE PACK Seanic Intelligent Valve Packs can be configured to meet many requirements. The pack is designed and built to operate our Smart Torque Tool, but can also be configured for other tooling requirements including FLOT’s and custom multi-function tools.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

Standard design allows for scaling of valve size and type providing simple rugged function while maintaining compact and light weight form. Closed or open loop control, data logging and custom control interfaces are all available options that can be added to the system. Graphical User Interface design can be customized for a wide range of applications.

TECHNICAL SPECIFICATIONS 87 lb (air) Weight

68 lb (water) 15 station

Dimensions

10 1/4” W x 22” L x 8 3/4” H 15 NG directional control valves, capable of proportional pressure control on 10 stations

Features

Transducers integrated to monitor supply, return and ambient pressure Clear lid for viewing Diagnostic’s LED’s Isolated RS232 circuit Customizable software and valve configurations 30 #4 JIC A/B Outputs; #12 JIC P/T Inputs; Filter included

Requirements

Power and Communications: 24 VDC @ 6 amps, RS232 Hydraulic: 3,000 psi @ 20 gpm max

SOS-TDS-013 REV A-11102017

18

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


TORQUE TOOL ADAPTER API 17H CLASS V Seanic has designed and manufactured an API 17H Class IV to API 17H Class V torque adapter for use in all standard API 17H Class V interfaces. Using an API 17H Class IV and API 17H Class V tool on the same dive is very common.

WHAT’S IN THE BOX -- SURFACE TEST JIG AND READ OUT -- COMPENSATOR BOTTLE COMPLETE WITH FITTINGS AND GEAR OIL

The real beauty of an API 17H Class V adapter is that no hydraulic connection is required, which allows the API 17H Class V tool to be left in place while other API 17H Class IV duties are being performed. The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.

-- SPARES KIT -- OPERATING & MAINTENANCE MANUAL

TECHNICAL SPECIFICATIONS Aluminum housing Steel gear reduction 17-4 SSTL location fins Materials

17-4 SSTL end effectors Delrin nose 316 SSTL ROV handle 316 SSTL hardware

Torque Range Weight

0-5,000 ft-lbs 215 lbs/98 kg (air) 170 lbs/77 kg (water)

SOS-TDS-032 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

19


TORQUE TOOL ADAPTER API 17H CLASS 6/7 Seanic has designed and manufactured an API 17H Class 6/7 torque adapter for use in all standard API 17H Class 6/7 interfaces. The tool is ideally suited for any subsea application requiring up to 25,000 ft-lbs torque.

WHAT’S IN THE BOX -- SURFACE TEST JIG AND READ OUT

The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations. The tool requires no electrical or hydraulic interface, freeing the ROV to leave it in place and perform other subsea operations.

-- STANDARD NOSECONE -- CLASS 6/7 END EFFECTOR AND TEST STEM -- COMPENSATOR BOTTLE COMPLETE WITH FITTINGS AND GEAR OIL -- SPARES KIT

TECHNICAL SPECIFICATIONS Stainless steel housing

-- VECTOR NOSECONE (OPTIONAL)

Steel gear reduction 17-4 SSTL location fins

-- OPERATING & MAINTENANCE MANUAL Materials

17-4 SSTL end effectors Delrin nose 316 SSTL ROV handle 316 SSTL hardware

Input Interface

API 17H Class 4 male end effector (1.5” square drive) API 17H Class 7 female end effector (3.5” square drive)

Output Interface

API 17H Class 6 female end effector (2.625” square drive)

Weight Torque Range

535 lbs/243 kg (air) 425 lbs/193 kg (water) 5,000-25,000 ft-lbs

SOS-TDS-027 REV A-11132017

20

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


17 H/D EXCLUDER HOT STABS AND RECEPTACLES The new bi directional flow excluder design keeps seawater out and hydraulic oil in. The purpose is to not contaminate the ROV hydraulic system with water and not have an environmental release of hydraulic oil into the ocean. The design does not impede flow or limit pressure ratings and can be made in single, dual or quad port configurations of 17H Type A or Type B.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

Made with the highest quality materials to perform in the harshest of subsea environment, all come with pressure test reports and material certificates. Pressure ranges available from 5,000-20,000 psi on all models, and can be configured with multiple port sizes and fitting types. Stabs and manifolds conform to API 17D or API 17H (ISO 13628-8).

TECHNICAL SPECIFICATIONS MATERIALS Handles

316 SS

Bodies

Xylan coated Nitronic 60

Female Receptacles

Nitronic 50

Nose Tips

Ni-Al-Brz

Fittings & Fasteners

316 SS

O-rings

90 Durometer HNBR

SOS-TDS-002 REV A-11062017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

21


PADDLE VALVES Seanic offers ROV-operable ball valve interfaces to complement the wide array of subsea ball, needle and directional control valves currently on the market. Our commitment to durable design and construction ensures that your tools will hold up under the demands of the subsea environment. We maintain a constant supply of paddle valves in stock, and can additionally provide your team with the necessary valve components to suit your project needs.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

Seanic’s paddle valves, manufactured entirely from durable and corrosion-resistant stainless steel, are designed with hard stops to prevent an ROV from over-torquing and avoid costly damage to the valve stem. They meet the industry standard API 17H specifications for ROV interface tooling. Designed with longevity in mind, our stainless steel paddle valves resist the damaging effects of subsea corrosion and boast a 20-year design life.

TECHNICAL SPECIFICATIONS Materials

Stainless steel

Depth Rating

Full ocean depth

Weight

11 lbs/5 kg

SOS-TDS-018 REV A-11132017

22

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HUB CLEANING TOOL API Standard or Custom This tool creates a clean and polished sealing surface to allow a gasket to attain a reliable seal, minimizing operational risks. Our HUB Cleaning Tool can be built with a scrubbing surface of various Scotch-Brite® pads or brushes to further break up tough marine deposits.

WHAT’S IN THE BOX -- SPARE SCOTCH BRITE® PADS

Seanic Ocean Systems has created a specially designed tool for the removal of fouling and marine growth from wellhead sealing surfaces prior to AX/VX gasket installation. The hub cleaning tool can be manipulator-driven or built for hydraulic

-- SPARE HARDWARE

operation, and is available to fit all API standard or other customer-requested

-- OPERATING & MAINTENANCE MANUAL

hub sizes. A valuable instrument for subsea construction or drilling work, the hub cleaning tool features no bolts or pieces that could potentially fall into the wellhead, eliminating the risk of costly damage and retrieval efforts.

TECHNICAL SPECIFICATIONS Stainless Steel Materials

Nickel-Aluminum-Bronze HDPE

Weight Dimensions

65 lbs/29 kg (air) 28 lbs/13 kg (water) 24.5”W x 18”H

SOS-TDS-012 REV A-11102017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

23


GASKET REMOVAL TOOL AX/VX & Custom Design We designed and manufactured a variety of ring gasket removal and installation tooling that boasts a rugged, yet lightweight design to perform under the formidable conditions of the deep sea environment. In addition to the standard configurations, we have engineered and manufactured custom Max-8 and Max-14 gasket removal and replacement tool designs that require side entry to the wellhead (2” and 4” AX).

WHAT’S IN THE BOX -- AX/VX TOOL

The gasket removal tool can be manufactured to accommodate a variety of industry standards or custom gasket sizes. It’s designed to be positioned by the ROV manipulator, efficiently and reliably replacing standard 18 3⁄4-inch AX and VX

-- #4 SIZE HOSE (2)

style gaskets, and is manufactured using 100% corrosion-resistant alloys, ensuring

-- SPARE GRIP TAPE

resistance to corrosion damage and years of dependable subsea operation.

-- OPERATING & MAINTENANCE MANUAL

TECHNICAL SPECIFICATIONS WEIGHT (AIR)

WEIGHT (WATER)

18 3/4”

61 lbs.

54 lbs.

16 3/4”

56 lbs.

48 lbs.

15”

50 lbs.

42 lbs.

Materials

Stainless Steel Nickel-Aluminium-Bronze

SOS-TDS-004 REV A-11082017

24

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


5K WATER BLASTER High Pressure Triplex water blasters for a multitude of purposes, including cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.

WHAT’S IN THE BOX -- COMPENSATOR BOTTLE COMPLETE WITH GEAR AND OIL FITTINGS -- SPARE STRAINER

Built with longevity in mind, our 5K water blaster requires less frequent gearbox flushing than other similarly powered water blasters on the market. In addition, the blaster can be used as a high pressure, high-volume pump for rapid and powerful fluid injection. Seanic maintains a stock of our standard 5K water blaster, and offers the option of customization according to customer needs.

-- WAND / TURBO NOZZLE -- GAUGE PANEL -- #8 JIC HOSE (2) -- #6 JIC HOSE (1)

TECHNICAL SPECIFICATIONS

-- #8 5K JIC HOSE (1) -- SPARES KIT -- OPERATING & MAINTENANCE MANUAL

#8 JIC hoses for supply and return of the motor Interface

#6 JIC hose motor case drain #8 JIC high pressure hose for water nozzle

Maximum Pressure

Input: 3000 psi / Output: 5000 psi

Maximum Flow

Input: 12 gpm / Output: 4.5 gpm

SOS-TDS-001 REV A-11062017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

25


SUPER GRINDER The Seanic Super Grinder is a powerful tool for cutting materials up to six inches in thickness. Aside from the standard fiber abrasive blade, the super grinder can operate with blade options including carbide tooth, carbide brazed, and re rescue-grade blades to suit the most demanding of subsea cutting needs.

WHAT’S IN THE BOX -- #8 JIC HOSE (3)

Powered by a commonly used and industry-accepted thruster motor, our Super Grinder features removable and replaceable blades to best suit the task at hand. The standard 20-inch blade is in stock, and can be manufactured in sizes

-- SPARE ABRASIVE BLADES (15)

ranging from 6-30 inches, in addition to custom diameters according to project

-- DIAMOND BLADES (UPON REQUEST)

specifications. This rugged and rigorously tested tool is used for decommissioning,

-- OPERATING & MAINTENANCE MANUAL

storm repair and recovery and for cutting and removal of jumpers and umbilicals to the surface.

TECHNICAL SPECIFICATIONS 316 SS frame, shroud and hardware Painted aluminum housing 17-4 drive shaft Fiber abrasive grinding wheel Stainless steel

Materials

Nickel-Aluminum-Bronze Oil of opportunity Motor requires A & B connection with #8 JIC Case drain requires C connection with #10 JIC Requires open center directional flow valve (1) 120 lbs/54 kg (air)

Weight

100 lbs/45 kg (water)

Operating Pressures

Max operation pressure: 3,000 psi Max flow rate: 20 gpm

SOS-TDS-025 REV A-11132017

26

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


BRUSHING TOOL Single Head A powerful brushing tool that cuts through tough marine growth on jacket legs, wellheads and other structures to allow for improved inspection, cutting, or attachment to subsea structures. The hydraulic-driven rotary brush, held by the ROV manipulator, safely and efficiently cleans growth and accumulated debris on subsea structures. The brush operates to a working depth of 10,000 FSW.

WHAT’S IN THE BOX -- ALL HOSES SUPPLIED

Our custom-engineered brushing tool features removable, individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear. The tool can be outfitted with a reservoir and pump to

-- SPARE BRISTLE PODS

inject citric acid onto the cleaning site through the brush head, ensuring thorough

-- CITRIC ACID PUMP AND RESERVOIR

removal of stubborn calcium growth and marine debris. Seanic also offers a

(AS REQUIRED) -- OPERATING & MAINTENANCE MANUAL

standard HUB cleaning tool that has an 18 3⁄4-inch diameter brush head, and can be customized to any dimensions to meet your subsea project specifications.

TECHNICAL SPECIFICATIONS 6061 T-6 Aluminum 316 Stainless Steel Materials

Ampco 45 Nickel-Aluminum-Bronze Carbon steel (motor) Polypropylene bristles Brass or nylon bristles

Hydraulic Requirements

6 gpm @ 2,000 psi

Working Depth

10,000 FSW

SOS-TDS-005 REV A-11082017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

27


ECB UNITS Cleaning Method Seanic has developed a revolutionary new cleaning method for subsea applications. By combining low pressure/high volume pumps and inertial cavitation nozzles, we’ve developed a safe and effective ROV powered cleaning system. Traditional high pressure water blasters can be ineffective or even destructive if used improperly. The Seanic ECB systems are a field-proven solution for removing marine growth from vessel hulls, strakes, risers, fairings and moorings.

WHAT’S IN THE BOX -- PUMP ASSEMBLY

Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine for removal of marine growth from vessel hulls, strakes, risers, fairings and moorings. Seanic

-- NOZZLES / HOSES

has developed a revolutionary new cleaning method for subsea applications.

-- COMPLETE SPARES PACKAGE INCLUDES

Traditionally high pressure water blasters are often ineffective because they aren’t

FITTINGS, HOSES, ETC. -- MAINTENANCE TOOLS AND SUPPLIES

powerful enough or they are too powerful and often damage the object being cleaned.

-- SPARES INVENTORY LIST -- OPERATING & MAINTENANCE MANUAL

TECHNICAL SPECIFICATIONS Input

Input 3000 psi @ 20-22 gpm

Output

3000 psi @ 14 gpm

Weight

Materials Dimensions

275 lbs (air) 225lbs (water) 316 Stainless Steei Aluminum 30”W x 36”L x 12”H

SOS-TDS-009 REV A-11102017

28

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


MULTI-PURPOSE PUMPS 10K-15K PSI This unique pump has the ability to pump a multitude of fluids and can be used for methanol service with no risk of cross contaminating the ROV’s supply oil. These pumps can be delivered with a variety of different reservoirs and directional control valves rated for 10k and 15k service.

WHAT’S IN THE BOX -- SPARES KIT -- OPERATING & MAINTENANCE MANUAL

Seanic’s multipurpose pumping system has a 3.8:1 ratio and is capable of pumping fluids to a working pressure of 10,000 psi. The pump is rated for use in 10,000 FSW and is made of corrosion-resistant materials, making it robust and reliable for subsea use. The pump is ideally suited for hydrate remediation work, as it can draw a powerful 22 in HG vacuum.

TECHNICAL SPECIFICATIONS Materials

Weight Maximum Output Pressure Operating Pressures

Hydraulic

Connections

316 SS housings, SS fittings Ni-Al-Brz, piston 78 lbs/35 kg (air) 60 lbs/27 kg (water) 10,000 psi, 2.5 gpm max flow Max HPU input pressure: 2900 psi Flow rate not to exceed 8 gal/min Oil of opportunity Requires one open-center directional flow valve Pump and tank: #6 JIC fittings Input and output: #4 JIC fittings

Working Depth

10,000 FSW

Dimensions

36” x 6” x 8”

SOS-TDS-017 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

29


DYNASET PUMP 5K Water Blaster The 5K Dynaset Water Blaster pump system was designed for high pressure, subsea cleaning.

WHAT’S IN THE BOX -- SPARE HOSES

Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging. At it’s core, the hydraulically driven Dynaset

-- REBUILD KIT

intensifier pump uses filtered sea water and a ROV friendly Turbo nozzle. In

-- OPERATING & MAINTENANCE MANUAL

addition, the pump can be used as a high pressure, high flow for rapid and powerful fluid injection.

TECHNICAL SPECIFICATIONS Weight

25 lbs (air) / 15 lbs (water)

Dimensions

18 in W x 19 in D x 7 in H

Materials

Primarily Aluminum 6061-T6 and Stainless Steel

Hydraulic Connections

Requires (1) open center directional control valve(s). P and T connections are #12 JIC male fittings.

Input Pressure & Flow

3,000 PSI @ 30 gpm max

Output Pressure & Flow

5,000 PSI @ 5.5 gpm

SOS-TDS-008 REV A-11102017

30

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


PH PROBE Seanic Ocean Systems has designed a pH probe used to measure and monitor pH in the subsea environment, particularly useful in drilling operations and the prediction of cement returns. The probe, which features a handle for ease of manipulation by the ROV, monitors pH levels within a wellbore and assists in the accurate prediction of cement return.

WHAT’S IN THE BOX -- SPARES KIT

The probe also features a logging function that can record pH readings for later download and analysis. Our pH probe is entirely self-contained and battery powered, with an extensive battery life of approximately 72 hours. The probe’s red

-- SOLUTIONS

LED display is highly visible in dark water, and features an energy-conserving sleep

-- OPERATING & MAINTENANCE MANUAL

function that can be switched on or off by flashing the ROV lights.

TECHNICAL SPECIFICATIONS Weight

65 lbs/30 kg (air)

Depth Rating

10,000 FSW/3,000 MSW

Battery Life

Approx 72 hours display time

Dimensions

54 in L x 7 in diameter (largest)

Materials

Stainless steel body and display housing UHMW probe

SOS-TDS-019 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

31


TORQUE RECEPTACLE API 17D Seanic maintains a supply of standard and customizable API Torque Receptacles in a variety of materials to interface with an ROV torque tool. Our bearingless torque receptacles can be panel-mounted for reliable docking, valve rotation, and interface with a torque tool or other subsea equipment to prevent costly damage to installation valves.

WHAT’S IN THE BOX -- RECEPTACLE UNIT

Seanic API Torque Receptacles are available in three materials to ensure sound interface and reliable performance with your subsea equipment. We offer torque receptacles in corrosion—resistant stainless steel, durable carbon steel, or a selflubricating Nickel-Aluminum-Bronze alloy. While standard torque receptacles are currently in stock, Seanic’s API Torque Receptacle can be modified as needed to meet customer demands for specific projects or custom orders. Our superior quality torque receptacles conform to API 17H and ISO 13628-8 standards, and can be machined to match any custom bolt pattern—providing a seamless connection and guaranteed compatibility with your ROV.

TECHNICAL SPECIFICATIONS 1020 Carbon Steel Materials

316 L Stainless Steel Ni-Al-Brz

SOS-TDS-026 REV A-11132017

32

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


LINEAR VALVE OVERRIDE TOOL LVOT / LAOT The Seanic Linear Valve Override Tool (LVOT ) is designed to API 17H specifications to manually override linearlyactuated valves that have lost hydraulic control power and returned to the closed or fail-safe position. Custom lockout positions are available.

WHAT’S IN THE BOX -- TYPE A, B AND C HEADS

The LVOT and lockouts are designed to be deployed through ROV intervention. Custom lockout positions are available. In addition to the LVOT, three different size lockouts are supplied to lock the linearly actuated valve at the 2-inch, 5-inch and

-- INTENSIFIER PANELS

7-inch positions. The LVOT and lockouts are designed to be deployed through ROV

-- LOCKOUTS (AS NEEDED)

intervention.

-- SPARES -- SPARES -- HOSES -- API 17H HOT STAB RECEPTACLE

TECHNICAL SPECIFICATIONS

(DUAL PORT OR SINGLE PORT) -- OPERATING & MAINTENANCE MANUAL

Weight

Maximum Pressure

300 lbs / 136 kg (air) 256 lbs / 116 kg (water) 3000 psi (rod side) 9115 psi (piston side)

Stroke

13 inches

Fail Safe

Spring retracts plunger

Maximum Force

170,000 lbs

Interface

Spring return retracts plunger

SOS-TDS-015 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

33


GL4 REGAN LATCH RELEASE TOOL Seanic Ocean Systems manufactures a GL4 Regan Latch Release Tool for the disconnection and removal of subsea guideposts. The damaged or non-functional guidepost can then be retrieved to the surface along existing guide wires.

WHAT’S IN THE BOX -- SPARES KIT

Our GL4 Regan Latch Release Tool, designed to be held in the ROV manipulator, enables an ROV to mechanically attach to the top of a guidepost and enable its removal using hydraulic power to compress and disengage the latching mechanism

-- HOSES

that holds the guidepost in place. The GL4 Regan Latch Release Tool’s hydraulic

-- OPERATING & MAINTENANCE MANUAL

supply can be either plumbed directly to the ROV, or supplied in the form of a hot stab attachment.

TECHNICAL SPECIFICATIONS Materials

316 L SS, carbon steel or aluminum

Stroke

3”

Output

3,000 psi @ 2 gpm

Release Force

18,000 lbs

Weight

35 lbs / 16 kg (air) 28 lbs / 13 kg (water)

SOS-TDS-011 REV A-11102017

34

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


DOCKING CONE API/ISO Standard Seanic manufactures and maintains a supply of API/ISO standard docking cones for the stabilization and alignment of an ROV modular skid.

WHAT’S IN THE BOX -- HOSES

Our docking cone is built to API/ISO standards guaranteeing ROV compatibility, no matter the application. The hydraulically actuated docking cone connects to a receptacle and serves as an interface between objects for such purposes as tree

-- SPARE SEALS KIT

and piletop landings, pile alignment, docking to subsea tooling systems, and as a

-- OPERATING & MAINTENANCE MANUAL

component installed on a tool deployment unit (TDU). Seanic can also provide the matching female mating receptacle that can be mounted on the tree or pile for orientation and simplified interface purposes.

TECHNICAL SPECIFICATIONS 316 Stainless Steel Materials

Anodized Aluminum Housing Delrin Nose Cone

Weight

20 lbs / 9 kg (air) 16 lbs / 7 kg (water)

SOS-TDS-006 REV A-11102017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

35


SUBSEA LOAD CELL The Seanic load cell is designed to provide accurate, reliable load readings for the lifting of subsea structures. This unit is a simple, rugged and reliable alternative to some of the other high tech options on the market. Calibration certifications are good for one year and can be quickly recertified annually. The subsea load cell comes with 2x gauges: one 0-10000 lb calibrated and one 0-20000 lb calibrated and can be interchanged quickly.

WHAT’S IN THE BOX -- SPARE GAUGE -- OPERATING & MAINTENANCE MANUAL

The subsea load cell installs directly between the lifting line and load itself. There are no electrical or battery operated components and the load cell can be easily monitored by an ROV with the large, easy-to-read display. The cells are manufactured of all stainless components and are completely oil-filled so corrosion is not a problem.

TECHNICAL SPECIFICATIONS Material

316/304/17-4 SS

Capacity

20,000 lbs max lift

Dimensions

12” L x 12” W x 8 1/2” D 55 lbs (air)

Weight

45 lbs (water)

Cylinder Max Pressure Rating

3,000 psi

SOS-TDS-020 REV A-11132017

36

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SUCTION CUP STICKY FOOT Seanic designs and manufactures a suction cup sticky foot that can be built to custom sizes or suction levels to assist in station-keeping and lifting smooth-surface objects.

WHAT’S IN THE BOX -- MANUAL

Its high level of suction and grip ensures that an ROV will stay reliably in place when attached to smooth surfaces such as a vessel hull or pipeline. The sticky foot can be deployed by the ROV manipulator or hard-mounted to the vehicle in an appropriate location for the job. While we have a variety of sizes in stock, our sticky foot can be manufactured to custom shape or size specifications, load holding capacities, and suction levels to ensure reliable performance under any conditions your ROV may encounter.

TECHNICAL SPECIFICATIONS Suction Cup Bellows

250 mm

Working Depth

10,000 FSW 6061 T-6 Aluminum 316SS

Materials

Rubber Ampco 45 Ni-Al-Brz Carbon Steel (motor)

Hydraulic Input Requirements

9 gpm @ 2,000 psi

Output Requirements

250 gpm

Weight

45 lbs/20 kg (air)

Dimensions

38 lbs/18 kg (water) 12” x 12” x 20”

SOS-TDS-023 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

37


SUCTION PILE INTERFACE STAB Seanic Ocean Systems manufactures an ROV friendly suction pile stab primarily used during the installation of suction piles. The stab is also available with a rubber flap seal option, eliminating the need for the additional hydraulic power used to iflate the bladder.

WHAT’S IN THE BOX -- SPARE BLADDER

Our stabs can be outfitted with pressure sensors, providing more accurate feedback than gauges and reducing the risk of damage or costly pile collapse. The suction pile interface stabs are built to order, can be customized to any size, and

-- GAUGE

are rigorously tested onshore to assure product quality and reliable performance

-- OPERATING & MAINTENANCE MANUAL

at depth. Custom-engineered design features include an optional inflatable seal to overcome common sealing problems associated with irregularly painted or corroded surfaces inside the stab interface of most suction piles. This provides a secure fit and the ability to tighten the O-ring in the event of rust or scale buildup.

TECHNICAL SPECIFICATIONS 6061-T6 Aluminum body/handles Delrin nose piece Materials

316 SS fittings Buna-N rubber bladder Buna-N rubber solid seal is also available

Weight

Dimensions

45 lbs (air) 38 lbs (water) 32 in L 13 in OD at handle

SOS-TDS-024 REV A-11132017

38

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


VORTEX DREDGE KIT The most powerful 4 inch ROV and diver dredge in the world is available for rent. The Vortex has a removal rate performance more commonly seen in the 6 inch dredges. Vortex do not supply dredges as a combination jetter/ dredge unit, with the belief that it is better to create the most powerful inlet suction and combine that with an actual high pressure jetter unit.

WHAT’S IN THE BOX -- VORTEX DREDGE KIT

The low hydraulic consumption leaves enough hydraulic supply on most ROV’s to utilize a purpose built jetter unit for effective soil breakup. Environmental concerns are addressed through the high efficiency, low energy demand hydraulic system negating the need for external compensators. This is a completely modular system with many installation options for a variety of ROV’s. The true 4 inch performance with minimum 3.89 inch internal diameter reduces blockages and operates on a lower hydraulic flow.

TECHNICAL SPECIFICATIONS Flow Requirements

19 gpm (minimum) 22 gpm (optimum)

2400 psi (minimum) Pressure

4500 psi (maximum) 2800 psi (optimum)

Weight

99 lbs / 45 kg (air)

SOS-TDS-028 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

39


MAG DRILL The drill is mounted to the metallic work site by energizing a lifting magnet using a hydraulic cylinder as the actuator. The powerful magnet holds the drill in place to perform precise cuts for the purposes of decommissioning, salvage, pinning, flooding or venting.

WHAT’S IN THE BOX -- SPARE ANNULAR BITS

Our Mag Drill is rated for 10,000 FSW and can easily cut holes into any flat or round steel structure with an annular cutter of up to 6 inches in diameter, at various depths-of-cut. This tool is custom engineered and built to meet customer

-- HOSES

specifications, and can be customized according to hole diameter and drill depth

-- SPARE MOTOR

to suit project needs. Seanic designs and manufactures a Mag Drill that allows

-- OPERATING & MAINTENANCE MANUAL

an ROV to attach a drill to any metallic subsea surface to cut holes of varying diameters.

TECHNICAL SPECIFICATIONS Drilling Hydraulic

Weight

6” (150mm, 3/4” shank) max. diameter annular cutter Requires 3 open centered directional control valves (4 valves if using optional Slug Ejector function) 201 lbs/91 kg (air) 171 lbs/77 kg (water)

SOS-TDS-016 REV A-11132017

40

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SUBSEA SAMPLE BOTTLE ASSEMBLY The Seanic Standard Sample Bottle system is a safe, simple and effective tool for gathering subsea samples. Custom configurations and interchangeable collection interfaces makes it the right choice for subsea sampling.

WHAT’S IN THE BOX -- SAMPLE BOTTLE ASSEMBLY

The Subsea Sample Bottle Assembly is used to collect samples of gas bubbles/ fluid from on or near the sea floor. It uses differential pressure to create a vacuum which will allow the gas bubbles/ fluid samples to be captured in the sample bottle

-- ROV HANDLE

subsea, and is not intended to identify the cause of or source of the gas bubbles/

-- VARIOUS RELIEF VALVE SPRINGS

fluid at the operation site, only to collect samples in a safe and easy way for future

-- SPARE FUNNEL

analysis.

-- SPARE FLEX HOSE -- OPERATING & MAINTENANCE MANUAL

TECHNICAL SPECIFICATIONS 316 SS valve and fittings Materials

Aluminum sample bottle Flexible PVC collection tube Compressed gas: 77.7 cu-ft/2.2cu.m

Bottle Capacity

Water: 2.93 gal/11.1 L Pressure: 3000 psi

SOS-TDS-021 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

41


DUAL FLUID HPU Seanic has designed and built a new Hydraulic Power Unit that is very unique. The use of a check ball pump and an electric motor was the difference between a standard oil HPU that can’t pump the water glycol and the air driven pumps usually used in this application.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

The Dual Fluid HPU can deliver 10k and 5gpm of either water glycol or traditional mineral based oils. This unit was built to fill a demand for both hyperbaric chamber testing of ROV tooling as well as providing constant volume flow for high pressure water glycol applications.

TECHNICAL SPECIFICATIONS 10,000 PSI @ 5 GPM Specifications

2-20 Gallon Reservoirs 4 Point Lifting Slings and Fork Pockets 230/460v/60Hz Electric Motor

Dimensions

76 x 56 x 86 3800 lbs

SOS-TDS-007 REV A-11102017

42

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


INTERVENTION PANEL Seanic Intervention Panels can be precision water jet cut from 316 L Stainless Steel or from Carbon Steel and painted with a 3 part epoxy process able to withstand long term subsea exposure.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

All panels and components will be under API Guidance to ensure ROV friendliness. Our staff has years of experience designing and building this equipment, providing you the confidence it will be done right the first time, every time. Seanic can custom design and manufacture ROV Intervention Panels per customer requirements. These can include Hot Stabs and Receptacles, ROV Torque Receptacles, Ball Valve Actuators and Gauges.

TECHNICAL SPECIFICATIONS Materials

316L or Epoxy Coated Steel

Weights & Dimensions

Varies according to customer requirements

Interface Options

Hot Stab, Paddle Valve, Gauges, Torque Receptacles, LVOT Heads or Flying Leads

SOS-TDS-014 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

43


30 INCH SAW This clamp design cuts through a single jumper and eliminates concerns of aligning multiple cuts. It’s retroactive, so all previously purchased 20 inch super grinders can be added to the clamp, and is easily removed for standalone applications. The clamp portion may be used with multiple Seanic cutting tools including both the 30 inch and 20 inch super grinders as well as other cutting and drilling accessories.

WHAT’S IN THE BOX -- SPARES KIT -- OPERATING & MAINTENANCE MANUAL

Through this streamlined design, the 30 inch saw provides maximum cut depth with minimal clamping support. The clamp design holds the grinder steady ensuring straight cut and preventing blade binding in both horizontal and vertical positions. Diameters range from 12 to 18 inches OD with adapter shoes allowing diameters as small as 4 inches.

TECHNICAL SPECIFICATIONS 345 lbs (air)

Weight

280 lbs (water)

Dimensions

43”W x 27 1/4”D x 78”H Clamping range of 12-18” OD

Features

Maximum cut depth of 11 1/2”

Depth Rating

Infinite

High Torque Motor

6,000 in-lb

Maximum Pressure

3,000 psi

Maximum Flow

20 gpm

SOS-TDS-003 REV A-11082017

44

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


ENGINEERED SOLUTIONS


ROV SHACKLE CUSTOM-ENGINEERED Seanic designs and manufactures a variety of hydraulic ROV actuation kits for shackles ranging from 5-500 tons for the purpose of lowering or lifting heavy equipment to or from the sea floor without cutting lifting wires. ROV shackles adhere to DNV 2.7-1 standards to ensure compatibility for your subsea needs.

WHAT’S IN THE BOX -- DUMMY POLY STAB

Constructed from an alloy steel and designed for simple operation through the use of an ROV manipulator, this tool enables an ROV to make or break shackle connections hydraulically when adding subsea hardware to a field, landing

-- API 17H HOT STABS (OPTIONAL)

manifold or other subsea construction. Seanic’s actuation kits for shackles are built

-- HOSES (OPTIONAL)

with a mechanical override capacity, in order to make or break shackles without

-- OPERATING & MAINTENANCE MANUAL

the need for hydraulic power. Seanic’s actuation kits for shackles are built with a mechanical override capacity, in order to make or break shackles without the need for hydraulic power.

TECHNICAL SPECIFICATIONS Weight (air)*

Weight (water)*

Dimensions

120T

360 lbs/163 kg

311 lbs/141 kg

50” x 14” x 25”

200T

984 lbs/446 kg

910 lbs/412 kg

64” x 14” x 30”

400T

1282 lbs/582 kg

1102 lbs/500 kg

74” x 19” x 36”

Material

Alloy steel; Stainless steel parts for hydraulic actuators

* Weights and dimensions for example models shown. ROV shackles can be manufactured in sizes ranging from 5-450 T.

SOS-TDS-034 REV A-11132017

46

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


FLEX JOINT CLEANING TOOL ROV COMPATIBLE The flex joint cleaning tool was designed to clamp around steel catenary risers with pipeline diameters ranging from 6 to 24 inches. The tool is operated by a Seanic technician through the use of a joystick and tooling computer with GUI interface inside the ROV control van.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

The unique deployment system of the tool allows it to be used on any industryrecognized work class ROV. The tool is designed with interchangeable tool trays, which provide the option to work with various inspection cameras, lasers, temperature probes and cleaning tools. The purpose of the tool is to thoroughly clean the underside of the flex joint by removing excessive marine growth from the elastomer, allowing for optimal inspection.

TECHNICAL SPECIFICATIONS Approximate Weight

Hydraulic Requirements

800 lbs/363 kg (air) ~ 20 lbs/9 kg (water) 10 gpm at 3000 psi Four Open-center Directional Control Valves Rotates 190° to 260° in either direction

Movement

Brush pole moves up and down and tilts forward and backward to reach corners/transition areas Transit tray moves pole closer to or away from the riser

SOS-TDS-033 REV A-11132017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

47


SEA CHEST COVERS MULTIPLE SIZES Seanic has designed and manufactured ROV-installable Sea Chest Covers in a variety of sizes, used for UWILD and for marine maintenance activities on subsea platforms. During a UWILD the external hull must be cleaned and inspected, in addition to the replacement and/or repair of internal systems inside the hull.

WHAT’S IN THE BOX -- OPERATING & MAINTENANCE MANUAL

Seanic’s Sea Chest Covers are used to plug the open flange during inspection and maintenance campaigns. The operation and functionality is imperative to the successful sealing of the internal hull while personnel and equipment are inside performing the inspection and maintenance. The differential pressure at the sea chest flange provides a sealing mechanism allowing for the seal face of the Sea Chest Cover to stay in place and prevent seawater from entering into the flange. Clamping mechanisms on the sea chest covers provide additional security for the connection and sealing force. An internal bladder on the sea chest is inflated using a seawater injection pump providing an internal sealing element as a secondary measure to prevent any additional seawater from entering the hull in the event of a slow failure of the primary face seal. The design is ROV friendly, and capable of being deployed and installed efficiently. Seanic’s API 17H FLOT and Class 1-4 torque tool is used to deploy and lock the Sea Chest Cover onto the sea chest flange.

SOS-TDS-035 REV A-11152017

48

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


TORQUE TOOL API 17H CLASS V

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- SURFACE TEST JIG WITH TOPSIDE

Aluminum housing Steel motor

DIGITAL READOUT

Steel gear reduction

-- COMPENSATOR FILL AND DRAIN BOTTLES -- HOSES

17-4 SSTL latching fins Materials

Aluminum counter parts

-- SPARE MOTOR

316 SSTL ROV handle 316 SSTL hardware

-- OPERATING & MAINTENANCE MANUAL -- BOX LIFT SLINGS CERTIFIED FOR OFFSHORE LIFT

17-4 SSTL end effectors Delrin nose

-- COMPLETE SPARES KIT

Torque Range Weight

Maximum Operating Pressures

2,000-5,000 ft-lbs 275 lbs/163.5 kg (air) 220 lbs/126 kg (water) 2,100 psi @ 10gpm (motor) 3,000 psi (latching fins)

SOS-TDS-036 REV A-03202018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

49


HYDRAULIC POWER PACK MODEL: 22KW Standard 22kw HPU suited to operate large range of tooling and various other applications. Operator friendly unit with basic control and function. Built in low level and overheat protection.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Sacraficial weld plates supplied on unit

--

Primary structure in accordance with DNV 2.7-1

--

Can be supplied with auxiliary pressure and flow control valves to suit

HYDRAULIC CONNECTOR FOR PRESSURE AND RETURN

client requirement --

Pressure, return and drain line filtration

-- ISO B CONNECTION FOR CASE DRAIN -- CROWFOOT CONNECTION FOR BOWMAN COOLER -- SUPPLIED WITH 25M ELECTRICAL CABLE -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Max Flow

75 l/min @ 60Hz operation

Max Pressure

320 bar @ 35 l/min 60 Hz operation

Motor

22kW WEG 4 pole 3ph 380/440v 50/60Hz

Starter

Star Delta in SS enclosure

Filtration

MP Filtri pressure, return & drain

Cooler

Bowman seawater heat exchanger

Reservoir

200 litre, low oil & high temp trips

Frame

4 point lift in accordance with DNV 2.7-1

Dimensions

1492 x 800 x 1615 mm

Weight

1,000 kg

Certification

Full certification package for MPI, slings, shackles & load test

SOS-TDS-175 REV A-11152017 SOS-TDS-159

50

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


ATEX ZONE 1 HYDRAULIC POWER PACK MODEL: Z1 36KW Atex Z1 rated HPU suited to a wide range of applications including operation of large tooling fleet. Built in low level and overheat protection. User friendly unit with basic control.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Sacraficial weld plates supplied on unit

--

Primary structure in accordance with DNV 2.7-1

--

Can be supplied with auxiliary pressure and flow control valves to suit

HYDRAULIC CONNECTOR FOR PRESSURE AND RETURN -- ISO B CONNECTION FOR CASE DRAIN

client requirement --

Pressure, return and drain line filtration

--

Built to ATEX standard with third party release inspection certificate

-- CROWFOOT CONNECTION FOR BOWMAN COOLER -- SUPPLIED WITH 25M ELECTRICAL CABLE -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Max Flow

140 l/min @ 145bar, 60Hz operation

Max Pressure

320 bar @ 50 l/min 60 Hz operation

Motor

36kW WEG Ex II 2G EEx d IIB T4 4 pole 3ph 380/440v 50/60Hz

Starter

Star Delta in Ex II 2GD EEx d II B T5 enclosure

Filtration

Ikron pressure, return & drain

Cooler

Bowman seawater heat exchanger

Reservoir

300 litre, low oil & high temp trips

Frame

4 point lift in accordance with DNV 2.7-1

Dimensions

1650 x 900 x 1870 mm H

Weight

1,500 kg

Certification

Full certification package for MPI, slings, shackles & load test

SOS-TDS-179 SOS-TDS-157 REV A-11152017

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk

51


HYDRAULIC CUT-OFF SAW MODEL: C023 The CO23 cut off saw designed for dimensional cutting of metal or masonry materials such as concrete, structural steel and pipe. Maximum depth of cut is 80mm and can be governed by adjustable shoe.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

TCT diamond or abrasive discs available for purchase

--

Maximum disc size 250mm

--

Lockable trigger

--

Lightweight, robust and operater friendly

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- HUB SPANNER

TECHNICAL SPECIFICATIONS Capacity

10” Disc

Arbor

1”

Flow

38-57 L/min

Pressure

105-140 Bar

Weight

10.4kg

Length

495mm

Width

280mm

Porting

8 SAE

SOS-TDS-166 SOS-TDS-159 REV A-11152017

52

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


3.5TE DEMAG PEEL GRAB The Demag 3.5te designed to safely handle scrap, waste, rock, slag and logs. Individually driven arms ensuring secure grip of load.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Can be configured for diver or ROV

--

Topside support equipment available

--

Basic, robust, heavy duty euipment for handling all coarse and bulky material

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- SINGLE LEG SLING AND MASTERLINK SUPPLIED FOR DEPLOYMENT

TECHNICAL SPECIFICATIONS Arm Capacity

0.8m3

Payload

3.5T

Weight

920 kg

No. of Arms

4

Pressure

200 bar

Height closed

1885 mm

Height open

1575 mm

Width closed

1610 mm

Width open

2420 mm

SOS-TDS-179 REV A-11152017 SOS-TDS-153

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

53


HYDRAULIC GRINDER MODEL: GR29 Due to its high power and variable speed range this versatile tool can be used for grinding, cutting, polishing and the removal of marine growth.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Hand held tool designed for use by diver or configured for ROV

--

Various discs available including abrasive, diamond and polishing

--

Can also be fitted with nylon and wire brushes

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- HUB SPANNERS

TECHNICAL SPECIFICATIONS Capacity

7” or 9” Disc

Speed

2700 rpm

Arbor

5/8” UNC

Flow

15 - 38 l/min

Optimum Flow

34 l/min

Pressure

70 - 175 bar

Weight

6.8 kg

Length

230 mm

Width

230 mm

Porting

8 SAE

SOS-TDS-159 SOS-TDS-170 REV A-11152017

54

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC REEL MODEL: HR300 Standard tooling downline. 300m twin line supplied. Max pull of 1000kg. Flow range 15-60 lpm. Working pressure 200 bar. In addition to supporting tooling fleet can be utilised for various other operations.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Sacraficial weld plates supplied on unit

--

Primary structure in accordance with DNV 2.7-1

--

Can be supplied with additional drain line on request

--

Pay in/out local control

-- 6MTR DECK WHIPS SUPPLIED WITH UNIT

--

Tool hot/cold local control

-- OPERATING MANUAL

--

Fitted with rotary coupling

TECHNICAL SPECIFICATIONS Capacity

300 m Twin Hose Umbilical

Max Pull

1000 kg

Flow

15 – 60 l/min

Pressure

200 bar

Connection

6 m hoses c/w Q.D. Couplings

Weight

1500 kg Tare, 3000 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

DRUM DIMENSIONS Core

800 mm

Flange

350 mm

Width

800 mm

DIMENSIONS

SOS-TDS-179 REV A-11152017 SOS-TDS-178

Length

1770 mm

Width

1770 mm

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk

55


HYDRAULIC PEANUT GRINDER MODEL: PG04 The 6mm collet allows for the fitting of flap wheels, micro cut off wheels, mounted points and various rotary burrs. Suited to grinding welds and intricate maintenance tasks. Operational flow range 15-40 lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Hand held tool designed for use by diver or configured for ROV

--

Various discs available including abrasive, diamond and polishing

--

Can also be fitted with rotary wire brushes

--

Wide range of burrs available to suit application

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- COLLET SPANNERS

TECHNICAL SPECIFICATIONS Speed

9450 rpm

Arbor

6 mm Collet

Flow

15 - 40 l/min

Pressure

70 - 175 bar

Weight

4 kg

Length

350 mm

Width Nose

65 mm

Width Body

91 mm

Porting

8 SAE

SOS-TDS-159 SOS-TDS-174 REV REV A-11152017 A-11152017

56

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk


WIRE ROPE CUTTERS MODELS: RCV75HD, RCV115, RCV155 Interlocking hydraulically operated anvil ensures the RCV75 blade can not be actuated until anvil is fully engaged. Integrated mini booster allows for unit operation with low pressure feed of 200 bar. The RCV115 & RCV155 benefit from an independently controlled anvil. Heavy duty construction for use in severe RCV75HD

RCV115

working conditions. Suitable for wire rope, umbilicals and

RCV155

cables.

WHAT’S IN THE BOX -- HIGH PRESSURE 4MTR WHIPS SUPPLIED AS STANDARD -- OPERATING MANUAL

MODEL RCV75HD --

Suited to both ROV and diver operations

--

Designed for cutting rope with a maximum diameter of 75mm

--

Operational flow rate 4 lpm to 14 lpm

--

Internal relief valve ensures blade cylinder is never over pressurised

MODEL RCV115 & RCV155 --

Can be configured for both diver and ROV on request

--

Operating pressure of 700 bar for blade and 200 bar for anvil

--

Can be supplied with intensifier

--

Various handles available on request

TECHNICAL SPECIFICATIONS RCV75HD

RCV115

RCV155

75 mm Dia. & 1960

115 mm Dia. & 1770

155 mm Dia. & 1880

N/mm2 grade

N/mm2 grade

N/mm2 grade

Any

Any

Any

-

690 bar

690 bar

Max Input Pressure Anvil

210 bar

210 bar

210 bar

Height

517 mm

703 mm

867 mm

Width

176 mm

252 mm

277 mm

514 mm

592 mm

125 kg

240 kg

Cutting Capacity (Wire Rope) Water Depth Max Input Pressure Main Cylinder

SOS-TDS-202 REV A-11152017 SOS-TDS-203 REV A-11152017 SOS-TDS-179 SOS-TDS-204REV REVA-11152017 A-11152017

Length (Max) Weight (Approx)

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

390 mm (max, anvil out) 43 kg

57


ROV CHAIN CALIPER Designed to measure one chain link ranging from 600mm to 1100mm. Fitted with dampened d-handle.

WHAT’S IN THE BOX -- CALIBRATION CERTIFICATE

--

Can be supplied with a range of go-no go gauges for interlink and diameter measurement

-- OPERATING MANUAL -- VERIFICATION BARS -- SUBSEA DISPLAY AND ASSOCIATED CONNECTORS -- 4M HOSE WHIPS

TECHNICAL SPECIFICATIONS Range

850-1050 mm

Tool Accuracy

+/- 0.3 mm

Weight in Air

42 kg

Weight in Water

34 kg

ROV Handle

Fish tail and Oceaneering flex joint

Max Pressure

30 bar

Max Force

0.4 Te

Hydraulic Interface

4 JIC or ¼ Swagelok, 4m hose

Instrument Interface

Supplied with Micro Subconn c/w voltage network

Chain link length

875 +/- 22 mm

Chain diameter

125 +/- 6 mm

SOS-TDS-190 SOS-TDS-159 REV REV A-11152017 A-11152017

58

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk


SUBSEA DRILL RIG MODEL: SDR100 Designed for drilling holes up to 125mm dia. Local variable speed control 10-35 lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Can be mounted via clamps, magnets and straps

--

Manual feed for precise control

--

Easily adapted to suit client specification

--

Various arbors and bits available to suit application

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- KEYS AND CHUCKS SUPPLIED AS PER APPLICATION

TECHNICAL SPECIFICATIONS Capacity

100 mm Dia

Speed

50 - 250 rpm

Flow

0 - 35 l/min

Pressure

70 - 175 bar

Length

440 mm

Width

230 mm

Height

540 mm

Porting

½” BSP

Weight

25kg

SOS-TDS-179 REV A-11152017 SOS-TDS-198

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

59


SOFTLINE CUTTERS MODELS: SL55, SL80 Although heavy duty the SL55 and SL80 are compact and lightweight. Pressure supply of 210 bar and 690 bar max respectively. Idealy suited to cut softlines, polyproylene and fibre ropes.

SL55

SL80

MODEL SL55

WHAT’S IN THE BOX

--

Can be ROV configured via mounting holes on cutter

-- INDUSTRY STANDARD 3/4 WING TYPE

--

Side open entry allows for easy placement

--

Cutting capacity of up to 54mm

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

MODELS SL80 --

Can be ROV configured via mounting holes on cutter

--

Side open entry allows for easy placement

--

Cutting capacity of up to 54mm

TECHNICAL SPECIFICATIONS

SOS-TDS-193 REV A-11152017 SOS-TDS-194 REV A-11152017

60

SL55

SL80

Capacity

54 mm Dia

80 mm Dia

Pressure

210 bar

690 bar

Weight

4.52 kg

14.2 kg

Length

410 mm

647 mm

Width

150 mm

188 mm

Depth

44 mm

138 mm

Porting

¼” BSP

¼” BSP

SOS-TDS-159 REV A-11152017

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk


SPITZNAS ANGLE GRINDER MODEL: SL80 Due to its high power and variable speed range this versatile tool can be used for grinding, cutting, polishing and the removal marine growth. Suited to those hard to reach areas.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Hand held tool designed for use by diver or configured for ROV

--

Various discs available including abrasive, diamond and polishing

--

Can also be fitted with nylon and wire brushes

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- HUB SPANNERS

TECHNICAL SPECIFICATIONS Operating Pressure

90 - 140 Bar

Working Pressure

90 Bar

Capacity

1.8 kW

Displacement

20-50 l/min

Free Speed

5500 ± 5% U/min

Peripheral Speed Max

52.2 m/s

Max Disc Size

180mm

Holder and Thread

22.2mm Dia. M14

Dimensions

570 x 250 x 150 mm

Weight (without holder & protecting disc)

6.7 kg

Weight (total)

7.6 kg

SOS-TDS-179 REV A-11152017 SOS-TDS-195

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

61


HYDRAULIC RECIP SAW MODEL: SPITZNAS A good alternative to rotary disc cutters. Carious pitch and length of blades available. Designed for those hard to get to areas. Wide flow range of 15-50lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Twist and lever throttle options available

--

Lock on lever control

--

Blade length up to 600mm

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- CHAIN AND CLAMP AVAILABLE ON REQUEST

TECHNICAL SPECIFICATIONS Capacity

290mm Dia

Power

2.8Kw

Flow

15 - 50 l/min

Pressure

140 bar

Strokes/min

350

Stroke

60 mm

Weight

6.1 kg

Length

600 mm

SOS-TDS-159 SOS-TDS-177 REV A-11152017

62

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC BREAKERS MODEL: BR45 & BR67 The BR45 light to medium breaker suited to rock, concrete and coral. Control trigger regulates amount of blows per minute from 0 - 1800. The BR67 medium to heavy breaker suited to rock, concrete tamping and rod driving. Control trigger regulates amount of blows per minute from 0 - 1300.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Well balanced tool for minimum operator fatigue

--

Variety of breaker points available including flat, moil and spade

--

Blow force increased with aid of built in diaphragm accumulator

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS BR45

BR67

Capacity

1 in Hex Parallel

6” x ¼” Hex

Weight

25 kg

30 kg

Length

65 cm

68 cm

Width

36 cm

40 cm

Pressure

105 - 140 bar

105 - 140 bar

Max Back Pressure

17 bar

17 bar

Flow Range

26 - 34 l/m

26 - 34 l/m

Optimum Flow

30 l/m

30 l/m

Porting

8 SAE

8 SAE

Output

1800 Blows/min

1800 Blows/Min

SOS-TDS-179 REV A-11152017 SOS-TDS-165

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

63


STANLEY CHIPPING HAMMER MODEL: CH15 The CH15 chipping hammer is suited to light concrete and rock breaking/chipping projects. A tool designed for more intricate work. A shock and heat insulated body paired with ergonomic design make it comfortable for diver operations. Flow range 26-34 lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Well balanced tool for minimum operator fatigue

--

Variety of breaker points available including flat, moil and spade

--

Trigger protection for minimising accidental activation

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Capacity

0.58” x 2 ½” shank steel bits

Flow

26 - 34 l/min

Pressure

70 - 140 bar

Weight

7.25 kg

Length

430mm

Width

80mm

Porting

8 SAE

Tool Steels

Wide chisel, Moil point, Flat chisel

SOS-TDS-196 SOS-TDS-159 REV A-11152017

64

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


STANLEY HYDRAULIC DRILL MODEL: DL07 The DL07 underwater hydraulic drill is a powerful and reliable tool for drilling holes in the hardest of woods, metal & masonry etc. With a wide flow range of 11-38lpm and feather trigger the DL07 is suitable for a very broad range of drill bit types and applications.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT

--

Powerful, lightweight, portable hydraulic drill completely sealed for underwater operation

--

Reverse feature

--

Compatible for range of drill bits up to 18mm dia all available for purchase

--

Fitted with trigger guard and dual position assist handle

-- OPERATING MANUAL -- CHUCK KEY SUPPLIED

TECHNICAL SPECIFICATIONS Capacity

½” Chuck

Speed

350 - 1500 rpm

Torque

27 Nm

Flow

15 - 45 l/min

Pressure

70 - 140 bar

Weight

3.6 kg

Length

230 mm

Width

100 mm

Porting

8 SAE

SOS-TDS-179 REV A-11152017 SOS-TDS-197

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

65


HYDRAULIC IMPACT WRENCH MODEL: IW12 Underwater impact wrench IW12 is a 3/4” square drive tool with adjustable impact intensity from 340-1632nm. Stanley impact wrenches can be operated over wide flow ranges, in the case of the IW12, 15-45lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Hand held tool designed for use by diver or configured for ROV

--

Various sockets available for purchase

--

Provides exceptional output torque from compact and lightweight tool

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Capacity

¾” Square Drive

Torque

340 - 1630 Nm

Flow

15 - 45 l/min

Optimum Flow

30 l/min

Pressure

70 - 140 Bar

Weight

6 kg

Length

240 mm

Width

102 mm

Porting

8 SAE

SOS-TDS-159 SOS-TDS-172 REV A-11152017

66

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC IMPACT WRENCH MODEL: IW16 The IW16 impact wrench is a 1” square drive underwater hydraulic wrench with adjustable impact intensity from 6803400nm. Stanley impact wrenches can be operated over wide flow ranges, in the case of the IW16, 26-45lpm.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Hand held tool designed for use by diver or configured for ROV

--

Various sockets available for purchase

--

Provides exceptional output torque from compact and lightweight tool

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Capacity

1” Square Drive

Torque

680 - 3400 Nm

Flow

25 - 45 l/min

Optimum Flow

30 l/min

Pressure

105 - 140 Bar

Weight

12 kg

Length

370 mm

Width

110 mm

Porting

8 SAE

SOS-TDS-179 REV A-11152017 SOS-TDS-173

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

67


5TE STRUTT GRAB The Strutt 5TE is designed to safely handle scrap, waste, rock, slag and logs. Individually driven arms ensuring secure grip of load.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Can be configured for diver or ROV

--

Topside support equipment available

--

Basic, robust, heavy duty euipment for handling all coarse and bulky material

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- SINGLE LEG SLING AND MASTERLINK SUPPLIED FOR DEPLOYMENT

TECHNICAL SPECIFICATIONS Arm Capacity

0.3m3

Payload

5T

Weight

800 kg

No. of Arms

5

Pressure

200 bar

Height closed

2010 mm

Height open

1550 mm

Width closed

1300 mm

Width open

2100 mm

SOS-TDS-159 SOS-TDS-154 REV A-11152017

68

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SUBSEA TORQUE VERIFICATION UNIT MODEL: SUBSEA TVU Used to confirm operational output from any rotary torque tool conforming to API17d class 1-4 or hi torque.

WHAT’S IN THE BOX -- CALIBRATION CERTIFICATE -- 5 DIGIT LED DISPLAY

--

Consists of high accuracy torque transducer mounted within a standard class 1-4 or high torque receptacle

--

Rugged housing deep water rated to 3000m

--

Max torque 2700nm

-- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Interface

API 17D Class 1-4 or API 17H Hi-Torque

Max Torque

2,700 Nm

Weight

37 kg

Length

370 mm

Width

500 mm

Height

550 mm

INPUT ADAPTORS: Class 1 & 2

17.5 mm Square

Class 3

28.6 mm Square

Class 4

38.1 mm Square

17 H

35.0 mm Square

SOS-TDS-179 REV A-11152017 SOS-TDS-199

www.seanicusa.com www.seanicusa.com info@seanicusa.com info@seanicusa.com // www.seanic.co.uk www.seanic.co.uk info@seanic.co.uk info@seanic.co.uk

69


TWIN DISC CUTTER MODEL: TDC125 The TDC125 is suited to cutting a variety of product including cable, hauser and wire rope up to a diameter of 125mm. Designed to push product away from discs allowing a more controlled cut and significantly reducing the potential for over bite.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE

--

Can be configured for diver or ROV

--

Twin disc reduces cutting times and increases disc life

--

Various discs available dependant on project

HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- HUB SPANNERS

TECHNICAL SPECIFICATIONS Max Cut Dia.

125 mm

Max Speed

4000 rpm

Flow

34 l/min

Pressure

210 bar

Weight

14.7 kg

Length

550 mm

Width

500 mm

Depth

250 mm

Mounting

‘T’ bar or Fishtail

SOS-TDS-159 SOS-TDS-201 REV A-11152017

70

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


TURNS COUNT & TORQUE READOUT MODELS: TC1 & TC2 Used in conjunction with KIS torque tool the TC1 displays amount of cw/ccw turns in addition the TC2 also displays torque output.

WHAT’S IN THE BOX -- CHARGING UNIT -- OPERATING MANUAL

--

Stand alone unit with no requirement for control system or datalink

--

Inbuilt light sensors actuate the display when illuminated by ROV or diver light, allowing the display to lay dormant when not required and therefore increasing battery life

TECHNICAL SPECIFICATIONS Display

5 Digit (14mm) LED +/- 999.9

Depth Rating

3,000 m

Battery

Rechargeable NiMh D cell

Activation

Light sensor

Count reset

Magnetic reed switch

Length

200 mm

Width

80 mm

Body Dia.

50 mm

Weight

1.6 kg (Air), 1.1 kg (Water)

SOS-TDS-179 REV SOS-TDS-200 REVA-11152017 A-11152017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

71


HYDRAULIC CUTTERS MODELS: UHC38, UHC80 With a double acting cylinder the UHC38 and UHC80 are suited to cutting wire ropes, cables and hoses/umbilicals. 700 bar maximum working pressure with a 0.5lpm minimum flow.

UHC38

UHC80

WHAT’S IN THE BOX -- HIGH PRESSURE 4MTR WHIPS SUPPLIED AS STANDARD -- OPERATING MANUAL

MODEL UHC38 --

Can be ROV configured via mounting holes on cutter

--

Side open entry allows for easy placement

--

Cutting capacity of up to 38mm

--

Can be configured with intensifier unit on request

MODEL UHC80 --

Heavy duty and robust cutter with a cutting capacity of 80mm

--

Can be configured with intensifier on request

TECHNICAL SPECIFICATIONS

SOS-TDS-167 REV A-11152017 SOS-TDS-168 REV A-11152017

72

UHC 38

UHC80

Max Cutting Capacity

38 mm

Ø80 mm

Wire Rope

38 mm

Ø75 mm

Height

327 mm

416 mm

Width

100 mm

-

Depth

130 mm

-

Cyl. OD

82 mm

174 mm

Operating Pressure

700 bar

700 bar

Swept Volume

145 cc

510 cc

Approx. Weight

15.2 kg

42 kg SOS-TDS-159 REV A-11152017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


10TE VANTEC GRAB The Vantec 10te is designed to safely handle scrap, waste, rock, slag and logs. individually driven arms ensuring secure grip of load.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR

--

Can be configured for diver or ROV

--

Topside support equipment available

--

Basic, robust, heavy duty equipment for handling all coarse and bulky material

-- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- SINGLE LEG SLING AND MASTERLINK SUPPLIED FOR DEPLOYMENT

TECHNICAL SPECIFICATIONS Arm Capacity

3.0m3

Payload

12,000 kg

Weight

3,800 kg

No. of Arms

6

Pressure

200 bar

Flow

40 - 80 l/min

Height open

2700 mm

Height closed

3360 mm

Width open

4180 mm

Width closed

2360 mm

SOS-TDS-179 REV A-11152017 SOS-TDS-155

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

73


HYDRAULIC SHEAR CUTTER MODEL: VHS60 With 1000te of cutting force and a jaw opening of 800mm the VHS60 is suited to cutting a variety of flexible and rigid products. Suitable for topside and subsea operations.

WHAT’S IN THE BOX -- RIGGING FOR VERTICAL AND HORIZONTAL

--

Can be configured for ROV and diver use

--

On request can be supported with various topside equipment

--

Maximum working pressure of 350 bar with a flow rate up to 400 lpm

OPERATION -- STANDARD DIXON CONNECTIONS -- TRANSIT FRAME AND RIGGING -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Model

Verachtert VSHS60

Jaw Opening Height

800 mm

Jaw Opening Depth

830 mm

Base of Jaws Height

718 mm

Max Closing Force

9850 kN

Optimum Flow

400 l/min

Max Pressure

350 bar

Frame

4 point lift in accordance with DNV 2.7-1

Dimensions

4780 x 1500 x 1912 mm H

Weight

6500 kg

SOS-TDS-180 SOS-TDS-159 REV A-11152017

74

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC SHEAR CUTTER MODEL: CAT S80 With 800te of cutting force and a jaw opening of 620mm the S80 is suited to cutting a variety of flexible and rigid products. Suitable for topside and subsea operations.

WHAT’S IN THE BOX -- RIGGING FOR VERTICAL AND HORIZONTAL

--

Can be configured for ROV and diver use

--

On request can be supported with various topside equipment

--

Maximum working pressure of 350 bar with a flow rate up to 200 lpm

OPERATION -- STANDARD DIXON CONNECTIONS -- TRANSIT FRAME AND RIGGING -- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Model

Caterpillar S 80

Jaw Opening Height

623 mm

Jaw Opening Depth

840 mm

Base of Jaws Height

525 mm

Optimum Flow

200 L/min

Max Pressure

350 bar

Frame

4 point lift in accordance with DNV 2.7-1

Dimensions

4800 x 1500 x 2400 mm H

Weight

6000 kg. 8000kg w/ frame

SOS-TDS-179 REV A-11152017

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

75


DIVER TORQUE TOOL MODEL: KIS17D4 The KIS tool is a basic rotary torque tool which conforms to API 17d class 1 - 4. A robust lightweight no frills tool with local control for diver operation.

WHAT’S IN THE BOX -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT

--

Maximum torque is 2700 nm. 20 rpm maximum

--

Can be supported on request by torque verification unit, torque manifold and turns counter

--

CW/CCW operation

--

Can be configured on request for ROV use

-- OPERATING MANUAL

TECHNICAL SPECIFICATIONS Interface

Class 1 - 4

Max Torque

2,700 Nm

Speed

0 - 20 rpm

Flow

0 - 25 l/min

Pressure

175 bar Max

Weight

26kg (in water)

Dimensions

675 x 220 x 300 mm H

Handle

Front and rear w/lift point

Porting

1/2” BSP

Tools may be supplied and used in conjunction with UES Torque Manifold and Torque Verification Unit. Supplied as standard c/w 1.5m whips and ¾” Q.D. Couplings

SOS-TDS-159 REV A-11152017

76

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC IMPACT WRENCH

MODEL: IW24

The IW24 impact wrench is a 1-1/2” square drive underwater hydraulic wrench with adjustable impact intensity from 1088-4760nm. Stanley impact wrenches can be operated over wide flow ranges, in the case of the IW24, 26-45lpm.

--

Hand held tool designed for use by diver or configured for ROV

--

Various sockets available for purchase

--

Provides exceptional output torque from compact and lightweight tool

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR -- 1.5MTR TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL

Capacity

1 ½” Square Drive

Torque

1088-4760 Nm

Flow

25-45 l/min

Optimum Flow

30 l/min

Pressure

125-140 Bar

Weight

19.5 Kg

Length

410 mm

Width

130 mm

Porting

3/8” NPT

SOS-TDS-205 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

77


HYDRAULIC HOLE PUNCH

Designed for the quick, safe and accurate punching of steel up to 16mm thick with a punch diameter of 24mm.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TOOLING SPANNERS

Based on requirement unit can be supplied with various punches ranging from 8mm - 24mm and a variaty of elongated punches

--

Rugged tool with ergonomically suited handle for ease of use operation

Operating Pressure

700 bar

Max Throat Depth

70 mm

Max Punching Thickness

16 mm Mild Steel, 6 mm Stainless Steel

Max Punching Diameter

24 mm

Hole Marking Time

11.8 Seconds

Allowable Max Pressure

68.65 MPa (700kgf/cm2)

Max Output

464 kN (47tF)

Ram Stroke

25 mm

Mass (Weight)

25.5 kg

SOS-TDS-206 REV A-06102018

78

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


STANLEY ROV TRASH PUMP

Designed to handle the pumping of fluids up to 1600 lpm and solids up to 3” in diameter. Configured to suit diver and ROV operation.

--

Can be supplied with a variety of hosing including layflat

--

Lightweight unit (14kg)

--

Configured to suit client requirement

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- LIFTING POINT AND TEST CERTIFICATE

Pump Flow Pump Connections

1688 LPM water Up to 3” solids 4” Camlok Discharge, 3” Camlok Suction c/w Heliflex Hoses & ROV Suction Head

Hydraulic Connections

8JIC Supply & Return 4JIC Pilot

Inlet Flow

27 l/min

Inlet Pressure

210 bar Max

Dimensions

450 x 450 x 320 mm H

Weight

30kg (in Air)

Tools supplied as standard with 3m Suction and Discharge hoses and 3m whips w/ JIC connections

SOS-TDS-207 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

79


INTENSIFIER PANEL

Robust, lightweight unit designed for easy install and hookup to ROV.

--

Integrated safety circuit for the automatic bleeding of excess pressure

--

Additional safety relief on pressure outlet

--

Max outlet of 690 bar with a 2 lpm flow

--

4:1 ratio

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE AND FACTORY SET SAFETY RELIEF

Max Outlet

690 Bar 2 LPM

Max Input

172 Bar 14 LPM

Intensifier Ratio

4:1

Water Depth

Any

Dimensions

252 x 153 x 144 mm

Weight in air

10 kg

Weight in water

7 kg

SOS-TDS-208 REV A-06102018

80

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


LP ROV JETTING UNIT

Lightweight versatile unit designed for easy operation via ROV.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL AND 3M WHIPS

LP ROV jetting unit delivering upto 310 lpm and 6 bar pressure through 1 1/4” outlet

Pump Flow

310 l/min

Pump Pressure

6 bar

Hydraulic Connections

8 JIC Supply & Return 4 JIC Pilot

Inlet Flow

27 l/min

Inlet Pressure

210 bar Max.

ROV Tooling Manifold

PO15, fitted

Dimensions

590 x 210 x 225mm H

Weight

16kg (Air), 12kg (Water)

Tools supplied as standard with 3m whips

SOS-TDS-209 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

81


ROLLER SHEAVE

For the safe deployment of cables, hoses and umbilical.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL AND CERTIFICATION

Lightweight unit with 2000kg line pull and capacity of product up to 80mm

Line Pull

2000 Kg

Bend Radius

800 mm

Max Diameter

80 mm

Sheave Length

1567 mm

Sheave Height

828 mm

Sheave Thickness

218 mm

SOS-TDS-210 REV A-06102018

82

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


ROV SHEAVE

For the safe deployment of cables, hoses and umbilical.

--

Unit incorporates guide rollers ensuring product is kept true to sheave

--

Additional deck frame available on request

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL AND CERTIFICATION

Line Pull

10,000 Kg

Bend Radius

780 mm

Max Diameter

50 mm

Height

2097 mm

Diameter

1610 mm

Radius to Inner Sheave

780 mm

SOS-TDS-211 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

83


OVERBOARDING CHUTE (SMOOTH)

For the safe deployment of cables, hoses and umbilical.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL. CERTIFICATION -- SACRIFICIAL WELD PLATES -- SLING ASSEMBLY

Lightweight unit with 3000kg load capacity of product

Radius

700 mm

Load Capacity

3000 Kg

Length

1310 mm

Width

405 B/Flanges

Weight

600 Kg

Mounting

Weld Plates

Certification

Full certification

SOS-TDS-212 REV A-06102018

84

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


OVERBOARDING ROLLER CHUTE

For the safe deployment of cables, hoses and umbilical.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- SACRIFICIAL WELD PLATES -- SLING ASSEMBLY

Lightweight unit with 3000kg load capacity of product

Radius

700 mm

Load Capacity

3000 Kg

Length

1310 mm

Width

405 B/Flanges

Weight

600 Kg

Mounting

Weld Plates

Certification

Full certification package provided

SOS-TDS-213 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

85


MELCAL MARINE CRANE

Compact design knuckle boom crane fitted to subframe grillage with a 14.5M reach.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

Powered via dedicated HPU supporting limit and weight overload protection

--

Radio controlled or local operation

--

Continuous slewing operation

Capacity

1.28Te at Full Reach

Hydraulic Reach

14.5m

Length Stowed

2.95m

Height Stowed

3.01m

-- SLING ASSEMBLY

Base Footprint

2.43m x 2.43m

-- SPREADER BEAM

Winch

2 Te

Max Reach

14.5m

Controls

Local & Radio Remote

Hydraulic Power

37kW, 270 bar

Slewing Angle

Continuous

Weight

6000 Kg

-- CERTIFICATION -- SACRIFICIAL WELD PLATES

-- REMOTE OPERATION STATION

SOS-TDS-214 REV A-06102018

86

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


TORQUE MANIFOLD

Allows a single tool to be configured for various output torques.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE

Integrated control manifold providing rotary control, speed control and 3 independent pressure controls

Max Pressure

210 bar

Max Flow

30 l/min

Weight

7 kg

Length

189 mm

Width

155 mm

Height

180 mm

Mounting

2 x M8 bolts

P, T, A & B

3.8” BSP

P1‐P4

¼” BSP

Gauge Port

Stauff test point

SOS-TDS-215 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

87


ROV TOOLING MANIFOLD BLOCK

Manifold allows the connection and control of tooling via ROV.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE

Protection of flow and pressure in addition to vent down check valve for the protection of tooling

--

Safety check within circuit to furthermore protect tooling

Max Pressure

210 bar

Max Flow

45 l/min

Standard Flow

35 l/mi

Main Ports

3/8” BSP

Pilot

¼” BSP

Mounting

3x M6 clearance holes

Dimensions

148 x 125 x 57 mm

Weight

2 kg

SOS-TDS-216 REV A-06102018

88

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SUBSEA HAND PUMP

Variety of pumps available including single acting or double acting low or high pressure.

--

Mounted on lightweight grating for ease of use

--

Built in pressure protection

--

Can be fitted with range of hydraulic connections to suit client

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

specifications

Max Working Pressure

700 bar

Controls

Single acting pressure & vent valve, Hand operated piston lever

Reservoir

Flexible reservoir suitable for subsea use (1 litre capacity)

Relief Valve

Safety Relief valve fitted internally. Adjustable up to 600 bar

Overall Dimensions

600 x 120 x 150 mm H

Weight

2 kg

SOS-TDS-217 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

89


LOW PRESSURE HAND PUMP

Low pressure hand pump available in single and double acting.

--

Mounted on lightweight grating for ease of use

--

Built in pressure protection

--

Can be fitted with range of hydraulic connections to suit client

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

specifications

Max Working Pressure

300 bar

Controls

Double acting pressure & vent valve, Hand operated piston lever

Reservoir

3 litre

Relief Valve

Safety Relief valve fitted internally. Adjustable up to 300 bar

Overall Dimensions

235 x 240 x 180mm H (without lever)

Weight

11.2 kg w/grill

SOS-TDS-218 REV A-06102018

90

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HIGH PRESSURE HAND PUMP

High pressure hand pump available in single and double acting.

--

Mounted on lightweight grating for ease of use

--

Built in pressure protection

--

Can be fitted with range of hydraulic connections to suit client

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

specifications

Max Working Pressure

700 bar

Controls

Double acting pressure & vent valve, Hand operated piston lever

Reservoir

2 litre

Relief Valve

Safety Relief valve fitted internally. Adjustable up to 700 bar

Overall Dimensions

235 x 240 x 180mm H (without lever)

Weight

11.2 kg w/grill

SOS-TDS-219 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

91


12T, 20T, 65T HYDRAULIC SHACKLE

Designed for safe rigging via diver or ROV.

--

Can be configured to operate via ROV direct or via hotstab

--

Can be operated and supplied with hand pump for diver operations

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE

HYDRAULIC SHACKLES

12T

20T

SWL

20 T

20 T

65 T

(Shackle Size)

25 T

25 T

85 T

0.5 - 10 l/min

0.5 - 10 l/min

0.5 - 10 l/min

30 cc

30 cc

240 cc

200 bar

200 bar

200 bar

30 kg

30 kg

60 kg

Length Open

670 mm

670 mm

1050 mm

Length Closed

520 mm

520 mm

800 mm

Width

110 mm

110 mm

160 mm

Height

320 mm

320 mm

530 mm

Porting

¼” BSP

¼” BSP

3/8” BSP

Flow Cylinder Vol Pressure Weight

65T

Tools supplied

Tools supplied

Tools supplied as

as standard with

as standard with

standard with ¼”

3/8 Snap - Tite

3/8 Snap - Tite

Snap - Tite Q.D.

Q.D. Couplings

Q.D. Couplings

Couplings

SOS-TDS-220 REV A-06102018

92

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


8T ROV CHAIN HOIST

Designed to provide stable and controllable raising and lowering of loads subsea.

--

Strong, robust unit

--

API 17D Class 4 interface with an unlimited depth rating

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- LIFT TEST CERTIFICATE

Lift Capacity

8,000kg

Lift Distance

3m

Minimum hook to hook distance

810mm

ROV Interface

API 17D Class 4

Input Torque

90Nm

Input Speed

300 rpm

Hoist Speed

1 m/min

Chain

3 falls

Depth Rating

Unlimited

Weight in Air

160kg

Weight in Water

144kg

SOS-TDS-221 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

93


50 LITRE AER SYSTEM

Designed to supply hydraulic power under black ship situation. Supported via independent HPU.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE -- DECK HOSES AND QDS

Intensified pressure up to 630 bar with a 50 litre accumulator capacity allowing the emergency actuation of cutters via stored energy

Hydraulic Supply

35 l/min at 275 bar max

Accumulator Capacity

50 litres

Charge Pressure

275 bar

Pre‐Charge Gas Pressure

140 bar

Available fluid capacity at

20 litres

above conditions Max Outlet Pressure 630

4:1 ratio

bar, with intensifier Frame

Welded steel channel stand, 4 pad eye lift point

Dimensions

700 x 700 x 2300 mm L

Weight

500 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles and load test

SOS-TDS-222 REV A-06102018

94

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


75 LITRE AER SYSTEM

Designed to supply hydraulic power under black ship situation.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE -- INTEGRATED HPU -- 20M ELECTRIC CABLE

Intensified pressure up to 630 bar with a 75 litre accumulator capacity allowing the emergency actuation of cutters via stored energy

Electrical Supply

7.5kW, 440V

Accumulator Capacity

75 Litres

Charge Pressure

300 bar

Intensifier Ratio

4:1

Max Outlet Pressure

630 bar

Length

1226mm

Width

1020mm

Height

1510mm

Weight

900kg Gross

SOS-TDS-223 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

95


12TE TENSIONER

Purpose built providing up to 12T constant back tension for umbilical spooling.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- TEST CERTIFICATE -- INTEGRATED HPU

Compact built unit with local controls and digital readout monitoring cable/umbilical tension, speed and length

--

Complimented with Seanic UK spooler and guide frame supplying a precision tensioning service.

Max Back Tension

12T

Max Line Speed

20 m/min

Drum Size

1800 OD x 500 mm Wide

Hydraulic Power Unit

Hatz 44.1kW Diesel, Tandum Dowty Gear Pumps, Air Blast & Seawater Coolers

Controls

Local Directional Control Valve & Tension Control Circuit

Operating Monitoring

Digital Readouts for Cable Tension, Speed & Length

Frame

Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions

4000 x 2000 x 2350 mm H

Weight

7500 kg

SOS-TDS-224 REV A-06102018

96

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


RB SPOOLER

Small compact hydraulic powered reel designed for the storage and deployment of a variety of cables and hoses.

--

Local control with various shafts supplied to support range of drum sizes

--

Power supplied by external HPU available on request

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- INDUSTRY STANDARD 3/4 WING TYPE COUPLERS -- SPOOLING DRUM

Max Drum Capacity

Max Drum OD - 1700mm

Max Drum width - 1200mm

1800 OD x 500 mm Wide

Max Back Tension

1500kg @ 750mm Radius

Drum Shaft Sizes

75 + 90mm Shaft Available

Motor

1 off - Staffa B270, 4.31 l/rev

Hydraulic Supply

Max Pressure 210 bar

Requirements Flow up to 50 l/min

4000 x 2000 x 2350 mm

Controls

Directional Control Valve Constant Back Tension Control Facility

Frame

Welded Channel skid, c/w lift points and sea fastenings

Overall Dimensions

2250 x 1010 x 1450mm H (excl.drum)

Weight

1500kg

Certification

Full certification package supplied in accordance with all current legislative standards

SOS-TDS-225 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

97


DRUM SPOOLER

Spooling unit for wire or umbilical bundles onto winches or cranes under tension.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

Local control and able to support range of drum sizes up to 2500MM wide and 3200MM dia

--

Maximum payload 30Te

--

Shaft collars available to suit range of drum through holes

Max Drum Capacity

2500 mm Max Drum Width

-- CERTIFICATION -- INTEGRATED HPU

3200 mm Max Drum Dia.

30 te Max Payload Max Drum Torque

36kNm

Max Back Tension

3T

Shaft Size

120 mm Dia.

Integral HPU

Perkins Diesel, David Brown Pump, Pall Pressure Filter, Air Blast & Seawater Coolers. 210 bar, 80 l/min

Controls

Directional Control Valve, Tension Control Circuit, Optional Spooler Guide Frame control circuit

Frame

Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions

5000 x 2400 x 2110 mm H (3350 mm H drum filled)

Weight

7000 kg

Certification

Full certification package is supplied for the unit, in accordance with all current legislative standards

SOS-TDS-226 REV A-06102018

98

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


SPOOLING GUIDE FRAME

Used in conjunction with the drum spooler to provide control of a product when spooling onto a storage drum.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION

Power typically provided by the spooling unit or can be provided from a separate HPU and control valve

--

Features geared drive to move product guide rollers

Max Umbilical/Wire Size

60 mm between rollers

Hydraulic Motor

Danfoss 0MM32

Hydraulic Supply Required

Max Pressure 60 bar, Flow up to 5 l/min

Control

Provided by Cable Spooler or other

Frame

Welded steel Channel skid, Box Section Frame c/w Forklift Pockets, Tie - Down Plates & 4 Point Lift

Dimensions

3600 x 1500 x 3375 mm H

Weight

3000 kg Gross

Certification

Full certification package for MPI, slings, shackles and load test

Weight

7000 kg

Certification

Full certification package is supplied for the unit, in accordance with all current legislative standards

SOS-TDS-227 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

99


HR300E ELECTRIC POWERED REEL

Primarily used to deploy air, hydraulic or broco service umbilicals for subsea operations. Can be provided with service umbilical or empty drum.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 20M ELECTRICAL CABLE

Inverter controlled electric drive providing a step-less variable speed operation

--

Pay in/out local control

--

Sacrificial weld plates supplied on unit

Capacity

300 m Twin Hose Umbilical

Max Pull

750 kg – (600kg) continuous

Line Speed

20 m/min

Drive

5 kW Inverter Drive

Supply

415/440 V, 50/60Hz

Drum Dimensions

Core 800 mm / Flange 350 mm / Width 800 mm

Length

1770 mm

Width

1770 mm

Weight

1500 kg Tare, 3000 kg Gross

Control

Manual Joystick

Certification

Full certification package for hose test, MPI, slings, shackles and load test

SOS-TDS-228 REV A-06102018

100

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HTL HYDRAULIC REEL

Primarily used for handling hose, umbilicals and cables for many applications. Drum can be split/ divided for installation of various bundles.

--

Local control for pay in/out

--

Sacrificial weld plates supplied on unit

--

3000KG payload

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 6M DECK HOSES (PRESSURE, RETURN, DRAIN)

Drum Core

1100 mm Dia.

Drum Width

1000 mm + 250 mm

Flange Depth

375 mm

Max Pull

4000 kg

Motor

MTL MHA500

Gearbox

Brevini RI250

Flow

70 l/min

Pressure

210 bar

Connection

6m hoses c/w Q.D. Couplings

Length

2160 mm

Width

2150 mm

Height

2300 mm

Weight

2000 kg Tare, 5000 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

SOS-TDS-229 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

101


LARGE HYDRAULIC BREVINI REEL

Primarily used for handling hose, umbilicals and cables for many applications. Drum can be split/ divided for installation of various bundles.

--

Local control for pay in/out

--

Sacrificial weld plates supplied on unit

--

3500KG payload

--

304mm dia access to drum core

--

Rotary union or sliprings of various sizes can be installed

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION

Drum Dimensions

Core 1250 mm Dia. / Flange 2250 mm Dia. / Drum Width 1500 mm

Hydraulics

Max Pressure 210 bar / Flow up to 160 l/min / Operational Flow – 45 l/min – 7rpm / Operational Pressure – 150 bar – 2000kg line

-- 6M DECK HOSES (PRESSURE, RETURN, DRAIN)

pull Max Line Pull

2000 kg at Drum

Motor

Hydromatic 55cc/rev Fixed Displacement axial piston

Brake/Gearbox

Brevini PWD3300, Planetary gearbox, Failsafe Brake (107.2:1 Ratio)

Control

Walvoil SD18/2 Motor Spool. Dual Bank

Slew Bearing

SUN 815 20 00 CC, 304mm Dia. Access to drum core

Frame

Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4

Dimensions

2500 x 2500 x 2600mm H

Weight

3500 kg Tare, 7000kg Gross estimated

Certification

Full certification package for hose test, MPI, slings, shackles & load test SOS-TDS-230 REV A-06102018

102

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


LARGE HYDRAULIC HAGGLUND REEL

Primarily used for handling hose, umbilicals and cables for many applications. Drum can be split/ divided for installation of various bundles.

--

Local control for pay in/out

--

Sacrificial weld plates supplied on unit

--

3500KG payload

--

304mm dia access to drum core

--

Rotary union or sliprings of various sizes can be installed

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 6M DECK HOSES (PRESSURE, RETURN, DRAIN)

Drum Dimensions

Core 1067 mm Dia. / Flange 2275 mm Dia. / Drum Width 1650 mm

Hydraulics

Max Pressure 210 bar, Flow up to 80 l/min (7rpm)

Max Line Pull

5000 kg

Motor/Brake

Hagglund, 11084cc/rev, HD62 - 111000 - A0 - R0 - 00 - 00

Control

Walvoil SD 18/2 Motor Spool spring centred. Relief valve set to 110 bar (3te)

Rotary Union

Optional – Slew ring bearing 340 mm ID

Couplings

Supply & Return 1” Parker 61 Series, Drain ½” ISO7241B

Frame

Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4

Dimensions

3100 x 2450 x 2700 mm H

Weight

6500 kg Tare, 10,000kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

SOS-TDS-231 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

103


POCLAIN HOSE REEL

Small compact hydraulic powered reel designed for the storage and deployment of a variety of cables and hoses.

--

Local control for pay in/out

--

Sacrificial weld plates supplied on unit

--

Drum has the facility for mounting slip rings of various sizes

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 6M DECK HOSES (PRESSURE, RETURN, DRAIN)

Capacity

200 m ½” Hose, 3,000m 5mm cable

Max Pull

200 kg

Flow

5 l/min

Pressure

200 bar

Connection

6 m hoses c/w Q.D. Couplings

Drum Dimensions

Core 615 mm / Flange 200 mm / Width 380 mm / Bearing Bore 142 mm

Length

1200 mm

Width

1050 mm

Weight

750 kg Tare 1500 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

SOS-TDS-232 REV A-06102018

104

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HYDRAULIC A-FRAME

Hydraulic powered A-frame configurable to suit a variety of applications that can be set up and supplied with winches and HPU.

--

Frame deployed via hydraulic rams

--

Local control station for frame deployment and winches

--

4Te Combined SWL, 3Te from one point

--

Sacrificial weld plates supplied on unit and installation rigging

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 6M DECK HOSES

SWL

4000kg

Approx. Weight

2500kg

Approx. Dimensions Length

4700mm

Width

2200mm

Height (stored)

2900mm

Height (max)

4300mm

Weight

750 kg Tare 1500 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

SOS-TDS-233 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

105


DIVER HI-TORQUE TOOL

The tool is a basic rotary torque tool which conforms to API 17H. A robust, lightweight, no frills tool. Ideal for use with local control for diver operation.

--

Maximum torque is 2000 Nm

--

20 RPM maximum

--

Can be supported on request by torque verification unit

--

Torque manifold and turns counter

--

CW/CCW operation

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- INDUSTRY STANDARD 3/4 WING TYPE

Interface

API17H 35mm Hi Torque

Max Torque

2,000 Nm

Speed

0 - 20 rpm

Flow

0 - 25 l/min

-- OPERATING MANUAL

Pressure

175 bar Max

-- CERTIFICATION

Weight

26kg (in water)

Dimensions

640 x 220 x 400 mm H

Handle

Front and rear w/lift point

Porting

1/2” BSP

HYDRAULIC CONNECTOR -- 1.5M TOOL WHIPS SUPPLIED WITH UNIT

Tools may be supplied and used in conjunction with Seanic Torque Manifold and Torque Verification Unit

SOS-TDS-234 REV A-06102018

106

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


MANUAL DIVER TORQUE TOOL

Basic rotary tool which conforms to API 17D and 17H. Simple, robust tool that can be manually operated by a diver.

--

Maximum torque is 2700 Nm

--

CW/CCW operation

--

Hand wheel or 3/4” drive

--

Facilitates the use of a torque wrench for accurate torque settings with

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

a multiplication ration of 5:1

Interface

API17H / API17D

Max Torque

2,700 Nm

I/O

5:1

Input

Hand Wheel or ¾” square drive

Weight

18 kg (in water)

Dimensions

460 x 220 mm

Handle

Included w/ lift point

Handle

Front and rear w/lift point

SOS-TDS-235 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

107


ROV TORQUE TOOL CLASS 1-4

The tool is a basic rotary torque tool which conforms to API 17D Class 1-4. A robust, lightweight, no frills tool. Ideal for use with small ROVs in shallow water depth (Max 300M).

--

Maximum torque is 2700 Nm

--

20 rpm maximum

--

Can be supported on request by torque verification unit, torque manifold

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- 3M TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- CERTIFICATION

and turns counter --

CW/CCW operation

Interface

API17H / API17D

Max Torque

2,700 Nm

I/O

5:1

Input

Hand Wheel or ¾” square drive

Weight

18 kg (in water)

Dimensions

460 x 220 mm

Handle

Included w/ lift point

Handle

Front and rear w/lift point

SOS-TDS-236 REV A-06102018

108

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


ROV HIGH TORQUE TOOL

The tool is a basic rotary torque tool which conforms to API 17H. A robust, lightweight, no frills tool. Ideal for use with small ROVs in shallow water depth (Max 300M).

--

Maximum torque is 2000 Nm

--

20 RPM maximum

--

Can be supported on request by torque verification unit

--

Torque manifold and turns counter

--

CW/CCW operation

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- 3M TOOL WHIPS SUPPLIED WITH UNIT -- OPERATING MANUAL -- CERTIFICATION

Interface

API17H 35mm Hi - Torque

Max Torque

2000 Nm

Speed

0 - 20 rpm

Flow

0 - 25 l/min

Pressure

175 bar Max

Weight

21kg (in water)

Dimensions

460 x 220 mm

Handle

T Bar or Fish Tail

Porting

1/2” BSP

Tools may be supplied and used in conjunction with Seanic Torque Manifold and Torque Verification Unit.

SOS-TDS-237 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

109


HYDRAULIC DRILL HD25

Versatile hammer drill ideal for rock, concrete, wood or masonry. Primarily for use underwater but also suitable to land applications.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

D-handle and large multi-position assist handle for increased manoeuvrability

--

Comes with depth gauge attachment

--

Hammer function can be disabled for efficient light drilling

Drilling Capacity

Up to 25mm (1”.)

Blows Per Minute

3,400 bpm

Flow Range

15 to 50 l/min

Pressure

140 Bar

-- INDUSTRY STANDARD 3/4 WING TYPE

Ports

8 SAE O - Ring

-- HYDRAULIC CONNECTORS

Weight

8.2kg

Length

475 mm

Connection

3/8 Body Flush Face Couplings

Motor

0.6 kW / 625 rpm @ l/min

System Type

Open Centre

Chuck Type

SDS - Plus

-- CERTIFICATION -- 1.5M TOOL WHIPS

SOS-TDS-238 REV A-06102018

110

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


MAGNUM CORING DRILL

Hand held drill providing unrivalled power for both wet and dry diamond drilling applications.

--

Built in torque limiting valve results in little or no kickback/snatch

--

Lockable on trigger

--

Water swivel for cooling and flushing

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- CERTIFICATION -- 1.5M TOOL WHIPS -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTORS

Capacity

100 mm Dia.

Flow

20 l/min

Working Pressure

140 Bar

Operating Speed

Mag 5 – 600 rpm / Mag 10 – 1000 rpm / Mag 15 – 1500 rpm

Weight

8 kg (without core bit)

Length

410 mm (without core bit)

Noise Level

83 dB Free running at 1m

Core bit connection

½” BSP Female

Options

Water Flush Swivel

SOS-TDS-239 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

111


PARROT CUTTERS IU10A30, CU3035

Double acting secateur cutters with twist activated handle.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL -- HIGH PRESSURE WHIP

Suited for the controlled cutting of steel sections, umbilicals and power cables

--

Built in pressure relief valve

PARROT CUTTERS

IU10A30

CU3035

Max. Cutting Capacity

Ø125 mm

Ø144 mm

Cutting Force

177 kN

306 kN

Length

696 mm

682 mm

Operating Pressure

700 bar

700 bar

Swept Volume Approx. Weight

84 cc

83 cc

15.3 kg

14.8 kg

SOS-TDS-240 REV A-06102018

112

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


CABLE CUTTER TC120

Hydraulic cutting head. Opening cutting head allows cutter to be placed over cables and hoses. Fully supported through Seanic fleet.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

Lightweight, compact unit ideal for restricted space operation suited to cutting hoses, umbilicals and copper cable with a diameter up to 120mm

--

Safety relief protects against over pressurisation

Weight

9.8 kg

Operating Pressure

700 Bar

Max Cutting Diameter

120 mm

Hose Whips

Length as required

Typical Cutting Capacity

3 x 150mm² Steel armoured 80mm

Examples

1000mm² EPR Rubber insulated 85mm 1000mm² EPR Rubber insulated + lead sheath 92mm 1000mm² EPR Rubber sulated + lead sheath + PE sheath 100mm

SOS-TDS-241 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

113


HAND OPERATED CUTTER - 85MM CAPACITY

Hydraulic cutting head. Opening cutting head allows cutter to be placed over cables and hoses. Fully supported through Seanic fleet.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

Lightweight, compact unit ideal for restricted space operation suited to cutting hoses, umbilicals and copper cable with a diameter up to 85mm

--

Safety relief protects against over pressurisation

Max Cutting Capacity (Dia.)

85 mm

Working Pressure

700 bar

Length

653 mm

Width

175 mm

Weight

6.6 kg

SOS-TDS-242 REV A-06102018

114

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


HAND OPERATED WIRE CUTTER 32MM CAPACITY

Hydraulic cutting head. Opening cutting head allows cutter to be placed over cables and hoses. Fully supported through Seanic fleet.

--

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- OPERATING MANUAL

Lightweight, compact unit ideal for restricted space operation suited to cutting hoses, umbilicals, wire ropes and power cables

--

Safety relief protects against over pressurisation

Cutting Capacities Wire Rope

32 mm

Soft steel bar

25 mm

Re‐Bar

25 mm

Copper Cable

32 mm

Aluminium Cable

32 mm

Length

375 mm

Width

90 mm

Weight

9.3 kg in Air

SOS-TDS-243 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

115


SPITZNAS AXIAL DIE GRINDER

The 6mm/ 1/4” collet allows for the fitting of flap wheels, micro cut off wheels, mounted points and various rotary burrs. Suited to grinding welds and intricate maintenance tasks. Operational flow range 10-30 LPM.

--

Hand held tool designed for use by diver or configured for ROV

--

Various discs available including abrasive, diamond and polishing

--

Can also be fitted with rotary wire brushes

--

Wide range of burrs available to suit application

WHAT’S IN THE BOX

TECHNICAL SPECIFICATIONS

-- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR -- 1.5M TOOL WHIPS SUPPLIED WITH UNIT

Speed

11500 rpm

Arbor

¼” Collet

Flow

10 - 30 l/min

Operating pressure

90 - 105 bar

-- OPERATING MANUAL

Weight

7.6 kg

-- COLLET SPANNERS

Length

275 mm

Width

65 mm

Porting

8 SAE

SOS-TDS-244 REV A-06102018

116

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk


DIESEL HPUS

Compact unit with air cooled diesel engine. 12v electric start system. Fitted with seawater heat exchanger.

--

System relief protection in addition to pump protection

--

320 bar max output pressure

--

Max 130lpm flow

--

Filtration for pressure, return and case line

TECHNICAL SPECIFICATIONS DIESEL HPUS

40KW

45KW

WHAT’S IN THE BOX

Max Flow

73 l/min @ 1800 rpm, 120 l/min @ 3000 rpm

130 l/min @ 1800 rpm 145 l/min @ 2000 rpm

Max Pressure

320 bar

320 bar

-- OPERATING MANUAL

Pump

Kawasaki K3VL45/B 45cc/rev variable

Kawasaki K3VL80/B‐1NRKM‐P0/1‐H4

displacement, load sensing, pressure and

80cc/rev variable displacement, pressure

torque control

and torque control

Deutz – F4L1011 air cooled diesel 1500/3000

Hatz – M4L air cooled diesel

rpm fitted with Chalwyn valve and spark

1500/2000 rpm

-- LIFTING CERTIFICATION -- SLING ASSEMBLY

Motor

-- SACRIFICIAL WELD PLATES -- INDUSTRY STANDARD 3/4 WING TYPE HYDRAULIC CONNECTOR FOR PRESSURE AND RETURN -- ISO B CONNECTION FOR CASE DRAIN -- CROWFOOT CONNECTION FOR BOWMAN COOLER

arrestor Starter

Battery with isolator, 12v

12v Electric

Filtration

MP Filtri pressure, Stauff return & suction

MP Filtri pressure, Stauff return & suction

Cooler

Bowman seawater heat exchanger

Bowman seawater heat exchanger

Reservoir

300 litre, level temperature gauge

300 litre, level temperature gauge

Fuel Tank

200 litre (244g/kWh @ 50% consumption)

200 litre (244g/kWh @ 50% consumption)

Frame

Steel channel base, box section corner

Steel channel base, box section corner

posts, 4 point lift

posts, 4 point lift

Dimensions

1900 x 1000 x 1400 mm h

1900 x 1000 x 1400 mm h

Weight

1800 kg wet

1800 kg wet

Certification

Full certification package for MPI, slings,

Full certification package for MPI, slings,

shackles & load test

shackles & load test

SOS-TDS-245 REV A-06102018

www.seanicusa.com info@seanicusa.com / www.seanic.co.uk info@seanic.co.uk

117


PRODUCT INDEX ENGINEERED SOLUTIONS

5Te Strutt Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

Flex Joint Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . 47

8T ROV Chain Hoist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

ROV Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

10TE Vantec Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sea Chest Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

12TE Tensioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

73

50 Litre AER System. . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 75 Litre AER System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

STANDARD ROV TOOLING

ATEX Zone 1 Hydraulic Power Pack . . . . . . . . . . . . . . . 51

5K Water Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Cable Cutter (TC120). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

17 Flow Excluder Hot Stabs & Receptacles . . . . . . .

21

Diesel HPUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

30 inch Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Diver Hi-Torque Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

AX/VX Gasket Removal Tool. . . . . . . . . . . . . . . . . . . . .

24

Drum Spooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Brushing Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Hand Operated Cutter (80MM) . . . . . . . . . . . . . . . . . . . 114

Docking Cone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Hand Operated Cutter (32MM). . . . . . . . . . . . . . . . . . . . 115

Dual Fluid HPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

High Pressure Hand Pump. . . . . . . . . . . . . . . . . . . . . . . 91

Dynaset Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

HR300E Electric Powered Reel. . . . . . . . . . . . . . . . . . 100

ECB Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

HTL Hydraulic Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Flying Lead Orientation Tool . . . . . . . . . . . . . . . . . . . . . 16

Hydraulic A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

GL4 Regan Latch Release Tool. . . . . . . . . . . . . . . . . . . 34

Hydraulic Breakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

Hub Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Cut-Off Saw . . . . . . . . . . . . . . . . . . . . . . . . . .

52

23

Intelligent Valve Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Hydraulic Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Intervention Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Drill HD25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

43

Linear Valve Override Tool . . . . . . . . . . . . . . . . . . . . . . . 33

Hydraulic Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mag Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Hydraulic Hole Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Multipurpose Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Hydraulic Impact Wrench (IW12) . . . . . . . . . . . . . . . . .

66

Paddle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Impact Wrench (IW16) . . . . . . . . . . . . . . . . .

67

22

54

PH Probe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Hydraulic Impact Wrench (IW24) . . . . . . . . . . . . . . . . . . 77

Subsea Load Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Hydraulic Peanut Grinder . . . . . . . . . . . . . . . . . . . . . .

56

Subsea Sample Bottle Assembly. . . . . . . . . . . . . . . . . 41

Hydraulic Power Pack (22KW) . . . . . . . . . . . . . . . . . . .

50

Subsea Torque Verification Unit. . . . . . . . . . . . . . . . .

17

Hydraulic Recip Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . .

62

Suction Cup Sticky Foot . . . . . . . . . . . . . . . . . . . . . . . .

37

Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

Suction Pile Interface Stab . . . . . . . . . . . . . . . . . . . . .

38

Hydraulic Shackle (12T, 20T, 65T). . . . . . . . . . . . . . . . . . 92

Super Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Hydraulic Shear Cutter (VHS 60) . . . . . . . . . . . . . . . . . 74

Torque Receptacle API 17D. . . . . . . . . . . . . . . . . . . . . .

Hydraulic Shear Cutter (CAT S80) . . . . . . . . . . . . . . .

32

75

Torque Tool Adapter 17H Class 6/7. . . . . . . . . . . . . . . . 20

Intensifier Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Vortex Dredge Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Large Hydraulic Brevini Reel . . . . . . . . . . . . . . . . . . . . 102

3.5Te Demag Peel Grab. . . . . . . . . . . . . . . . . . . . . . . . .

Large Hydraulic Hagglund Reel. . . . . . . . . . . . . . . . . . 103

118

53


LP ROV Jetting Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Low Pressure Hand Pump . . . . . . . . . . . . . . . . . . . . . . . 90

TORQUE TOOLS Electric Smart Torque Tool API 17H Class 1-4 . . . . . . . 13

Magnum Coring Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Hi-Torque Tool API 17H. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Manual Diver Torque Tool. . . . . . . . . . . . . . . . . . . . . . . 107

Smart Torque API 17h Class 1-4. . . . . . . . . . . . . . . . . . . 14

Melcal Marine Chute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Torque Tool API 17H Class V. . . . . . . . . . . . . . . . . . . . . . 19

Overboarding Chute (smooth). . . . . . . . . . . . . . . . . . . . 84

Class V Torque Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Overboarding Roller Chute. . . . . . . . . . . . . . . . . . . . . . . 85 Parrot Cutters (IU10A30, CU3035). . . . . . . . . . . . . . . . . 112 Poclain Hose Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 RB Spooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Roller Sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 ROV Chain Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

ROV High Torque Tool . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ROV Sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 ROV Tooling Manifold Block . . . . . . . . . . . . . . . . . . . . . . 88 ROV Torque Tool (Class 1-4). . . . . . . . . . . . . . . . . . . . . .108 Softline Cutters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60

Spooling Guide Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Spitznas Angle Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . 61 Spitznas Axial Die Grinder . . . . . . . . . . . . . . . . . . . . . . . 116 Stanley Chipping Hammer . . . . . . . . . . . . . . . . . . . . . .

64

Stanley Hydraulic Drill . . . . . . . . . . . . . . . . . . . . . . . . . .

65

Stanley ROV Trash Pump. . . . . . . . . . . . . . . . . . . . . . . . 79 Subsea Drill Rig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

Subsea Hand Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Subsea Torque Verificaation Unit. . . . . . . . . . . . . . . .

69

Torque Manifold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Turns Count & Torque Reader. . . . . . . . . . . . . . . . . . .

71

Twin Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Wire Rope Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

119


THE CENTURION GROUP PORTFOLIO OF COMPANIES Centurion Group Limited provides equipment rental and specialist services on a global scale. We provide our customers with superior value by virtue of our experienced people and our unique ability to provide one rental solution via our portfolio companies. We combine the scale, breadth and capability of our collective rental solutions to drive efficiencies for our customers globally.


HEADQUARTERS

UK OFFICE

25310 Clay Road

West Pitmillan Business Centre

Katy, TX 77493

Newburgh, Ellon AB41 6AL

United States

United Kingdom

+1 (713) 934-3100

+44 1358 788202

info@seanicusa.com

info@seanic.co.uk

DISTRIBUTORS Ativatec

CPH ProServe Pte. Ltd.

Rua Hélio de Almeida s/n Prédio 3,

8, Tuas View Square

Sala 41, Cidade Universitária

Singapore 637574

Ilha do Fundão / Rio de Janeiro –

+65 6561 7987

RJ – Brasil – CEP 21941-614

penghoe.ching@cphproserve.com

+55 21 3733 4125 daniel@ativatec.com.br Reliance Subsea

Scanmudring

76 Tragarete Road

430-434 Water Street, Suite 300

Port of Spain

PO Box 39087, Topsail Road PO

Trinidad & Tobago

St. John’s NL A1E 5Y7

(868) 355 8400

+1 709 722 2325

info@reliancesubsea.com

georgeosmond@scanmudring.ca

EQUIPMENT MANAGEMENT Outsourcing SOLUTIONS A CENTURION COMPANY

Seanic Digital Catalog – Summer 2018  
Seanic Digital Catalog – Summer 2018