Page 72

HYDRAULIC CUTTERS MODELS: UHC38, UHC80

UHC38

UHC80

MODEL UHC38 --

Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses

--

Target material is placed in the open jaw of the cutter

--

Hydraulic pressure supplied from a separate source (ROV or deck HP Pack)

--

Capable of supplying pressure up to 700 bar, with a 0.5 l/min flow applied to complete the cutting operation

MODEL UHC80 --

Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses

--

Target material is placed in the jaw of the cutter and the anvil pin Is then inserted, retaining the material

--

Hydraulic pressure is supplied from a separate source, typically a deck mounted HPU

--

A supply pressure of 700 bar and flow of 0.5 l/min is applied to complete the cutting operation

TECHNICAL SPECIFICATIONS

SOS-TDS-167 REV A-11152017 SOS-TDS-168 REV A-11152017

72

UHC 38

UHC80

Max Cutting Capacity

38 mm

Ø80 mm

Wire Rope

38 mm

Ø75 mm

Height

327 mm

416 mm

Width

100 mm

-

Depth

130 mm

-

Cyl. OD

82 mm

174 mm

Operating Pressure

700 bar

700 bar

Swept Volume

145 cc

510 cc

Approx. Weight

15.2 kg

42 kg

www.seanicusa.com info@seanicusa.com / www.seanicuk.com info@seanicuk.com

Profile for Seanic Ocean Systems

Digital Catalog – Fall 2017  

Digital Catalog – Fall 2017