Stop burning waste gases!
+ = + €/$ +
wer o p the clean
on i t uc d pro
THE GREEN ENERGY SOLUTION
ble the m
Do you use an industrial flare?
Do you burn waste gases?
Do you burn a profit? Flaring waste gases provides no benefit whatsoever. This process does not negate satisfactorily the damage to the environment and the degradation of the quality of life for neighboring communities. Furthermore, valuable revenue that could be obtained through the use of modern waste disposal technologies is practically burned into thin air. Why waste energy and money by using a polluting process?
A complete and effective Todayâ€™s technology can turn around this problem and make it a source of profit in every aspect. Landfills, refineries and the system that converts mining of gas and oil are just a few of the activities that can the wasted energy into take advantage of their by-production of waste gases. T clean energy Leading-edge technology permits the generation of gas with almost zero emissions. electricity and useful thermal energy from them, allow spectru while minimizing, at the same time, their adverse low-fuel environmental effects. technologies
Do not burn waste gases! Make money and save the environment.
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
ON A PRO
-DEPRECIATION OF CA -PRODUCTION: 2,2 GW -(NOx, CO, VOCs) emission -Low maintenance costs! -Movable to the next site when
THE GREEN ENERGY SOLUTION
an energy production
lut th ion e
offers a range of innovative solutions for energy production with nearly zero emissions. These solutions revolve around the production of heat and electrical energy (cogeneration) from a wide range of gaseous fuel sources, including low quality gas.
Flex Turbine ΜΤ250™ The MT250 successfully operates in a variety of environments.
Combined Heat and Power (CHP)
The 250kW system provides clean, continuous power to a facility while it recovers heat for greater efficiency in on site heating, cooling and hot water systems. It is the cleanest burning and most robust gas turbine suitable for industrial or commercial applications, such as active landfills, refineries, steel industry and any other process that directs waste gases to a torch.
FlexEnergy technology enables customers to generate continuous energy from low caloric value gases while attaining extremely low emissions of NOx, CO and VOC’s.
Oil & Gas Production Hydrocarbon fuels can result from many operations along the oil/ gas recovery stream. “Raw” gases associated with upstream recovery operations can often be conditioned for direct use with a turbine. Hydrocarbon constituents can be used as fuel as long as sufficient dew Install point suppression can be maintained.
now Flex Turbine The Flex Turbine™ MT250 operates effectively using a wide range of seous fuels. Its ability to adjust the combustion turbine technology, MT250™ to produce ws the MT250 to make clean and efficient fuel consumption of a broad um of caloric values - even with gas 30% methane content. Thus, ultra-clean electricity and blends (biogas) or too high in energy (natural gas) that other useful thermal energy s are unable to exploit, the MT250 reclaims them.
STE TO ENERGY
APITAL: 1,5 -3 years! W per year! ns: < 5ppm! needed!
The Flex MT250 G3
Advantages of a Flex Turbine™ MT250 • Generates reliable power that provides energy security and the ability to supply electricity to priority loads in the event of a grid outage.
The Flex MT250 EX
is a gas turbine, which takes advantage of hot air from an external heat source to produce electricity.
• Has a long-term field operating record in diverse applications and environments. • Contains an internal waste heat recovery system that results in a compact footprint. • Provides heating/cooling capability in addition to electricity resulting in energy savings over time. • Hedges against increasing electricity prices by ensuring predictable costs. • Increases power temperatures.
SCIN AB ScandInvestor AB
Reg nr. SE.556811-1248 www.scin.se / firstname.lastname@example.org EUR IBAN: SE77 6000 0000 0000 4500 1529 BIC: HANDSESS
SWEDEN Västra Finnbodavägen 2 131 31 Nacka P.O.Box 2037, 132 02 Saltsjö-Boo
• Performs in the harsh environments due to its durable, rugged design. • Has low emissions as a result of its patented low-N Ox combustor. • Recuperates engine heat to enhance turbine efficiency. • Has integrated fuel-gas booster available. • Is CARB Certified for landfill gas, digester gas and natural gas specializes in the
Waste-to-Energy sector, providing commer-
Benoordenhoutseweg 13, 2596 BA Den Haag P.O.Box 3, 2650 AA Berkel en Rodenrijs Tel +31 70 314 24 16 Fax +31 10 713 15 63
cial, construction and consulting services.
GREECE: Athens dpt: Mavrogenos 13 Lofos Axiomatikon, GR-121 36 Peristeri Attiki Tel +30 697 285 66 22 Ioannina dpt: Gerakari str 7, GR- 45 332 Ioannina, Tel: +30 26510 21846, Fax: +30 26510 21848
WASTEENERGY is an affiliate of the Swedish company SCIN AB. has established a partnership with EECT-Turbomachinery to install and service the cleanest power stations in the market – all manufactured by FlexEnergy, the leader in renewable, green and flexible energy production.
copyright SCIN AB & SBD AB ©
is a complete system for producing electricity and thermal energy with a gas turbine.
Published on Dec 7, 2012
Do you use an industrial flare?Do you burn waste gases?Do you burn a profit? Today’s technology can turn around this problem and make it a s...