Issuu on Google+

Table of Contents Sumps and filling stations made of GRP, PE and steel IBC bands and ground protection systems Drum and hazardous material racks, environmental and safety cabinets Safety container modules and fireproof storage units Tanks for lubricants and hazardous materials Collection stations, containers and filling funnels Cemsorb binding agents, eye rinser, oil suction units and boot cleaners

6 - 19 20 - 24 25 - 35 36 - 39 41 - 47 48 - 56 57 - 62

Page Page Page Page Page

65 - 68 69 - 75 76 - 78 79 - 80 81 - 82

Pumps

Page Page Page Page Page Page Page

Environmental protection

Hazardous-material storage, environmental protection

Pumps

Filling stations, tank systems

Diesel dispensing pumps and CUBE pumps Diesel pumps, chemical pumps electrically Lubricant pumps electrically and pneumatically Grease guns and bucket greasers Chemical pumps, hand pumps

Filling stations, tank systems Stationary tank systems and fuel dispensing areas Mobile tank systems for diesel and petrol Tanks systems for AUS 32 (AdBlue®)

Page 84 - 107 Page 108 - 125 Page 126 - 136

Transport and storage containers

Transport and storage containers Tanks and mobile water dispensing systems Storage tanks and polyethylene water reservoirs Rectangular containers Logistics and tool boxes, steel tipping container, large containers, rinsing trays

Page 138 - 150 Page 151 - 155 Page 156 - 159 Page 159 - 166

Spreaders

All-purpose spreader Box spreaders 35 l

Page

169

Rotary spreaders 20 l - 260 l, Mounted spreader 130 l

Page 170 - 172

Winter service

Winter services Grit container, handling equipment Brine tank Snow shovels and polypropylene shovels

Page 174 - 177 Page 179 Page 180

CEMO Solar Thermal Applications with SUNdirect and SUNclassic, KT heat storage tank Heating oil storage with GRP safety tanks

Page 182 - 188 Page 189

Index

Page 192 - 193

Product group (PG): Please note the different resale conditions for the individual product groups. The respective product group is indicated on every catalogue page. Delivery is made by parcel service for individual orders;

see "terms of delivery and payment" on page 191.

AdBlue® is a registered trademark of the German Automotive Industry Association.

Heat and energy storage

Heat and energy storage

1


Always on the safe side with tank systems from CEMO. The tank types and safety of tank systems are divided into various classes. We would like to show you here briefly the most important distinguishing features that offer you maximum safety for your application. On the following pages you will find professional tank systems in all classes that meet these requirements. Tank, single wall (the tank wall is not monitored) In the event of a leak, the stored fluid (oil, diesel, fuel oil, etc.) can escape into the environment and cause damage. The main distinction between these tanks lies in their material properties that are influenced by factors such as ageing (shape retention, UV resistance, corrosion)

or in the event of failure (leakage before fracture). For this reason, only single-walled GRP safety tanks* may be installed without bund outside water protection areas thanks to their outstanding material properties. Tank in bund (both tank walls are not monitored) Only the intermediate spaces have to be monitored optically or with a leak detector. In the event of undiscovered damage to the bund, the stored fluid can nevertheless escape unnoticed into the environment and cause extensive damage in the event of a leak in the tank. Although colloquially speaking it may be correct to call these “double-walled systems”, the expression is mislead-

Tank single wall

Tank in bund

Double-walled tank with liquid leak detector

Double-walled tank with vacuum monitoring

ing as there is no active monitoring to detect and signal damage. Double-walled tank with liquid leak detector (both tank walls are constantly monitored) Damage to the tank walls is immediately indicated by a drop in the leaked fluid. In the event of damage to the outer tank wall, how­ ever, part of this leaked fluid can escape into the environment, but without causing extensive damage. Double-walled tank with vacuum monitoring (both tank walls are constantly monitored) Damage to the inner or outer tank wall is immediately signalled optically and acoustically even before a stored fluid can escape into the environment. This tank type conforms to safety class 1 of the EU standard to which we manufacture our DWT tanks for the highest level of safety.

We will be happy to advise you in more detail.

Info-Hotline:

+49 (0) 71 51 / 96 36-0 2

* The national installation laws and conditions must be observed.


Environmental protection

Real advantages for you: !

 esponsible behaviour secures our future: R Tanks and sump pallets for water protection

!

 he creation of tidy, well ordered conditions T leads to safer storage

!

 ll CEMO products comply with legal requirements and design A approval requirements in many countries: so you avoid risks

!

 e offer solutions that can stand up to any com­parison: W e.g. GRP tanks with 25 year guarantee

!

 RP tanks and sump pallets are virtually all-purpose: G e.g. for many chemicals and flammable liquids with a flash point > 55° C (up to now A III)

3


Safe storage of hazardous materials (German regulations as example)

The basics of hazardous material storage When storing hazardous materials, various basic legal conditions are to be observed. The essential relevant information is presented below. Cause for Concern principle: Water is the most important foundation for life and is irreplaceable. This fact has always been true, and endangering the water supply is a threat to our future. This is why the so-called "cause for concern principle" is central to the (German federal) Water Resources Management Act. In the words of a lawyer: "Cause for concern exists not only when a harmful event is likely to occur but even as soon as a harmful event is not unlikely to occur."

1. Water polluting classes (WGK) According to the Water Resources Management Act (Wasser­haushalts­ gesetz - WHG) § 19 g, water polluting materials are divided into the following classes in accordance with the Administrative Regulations for Water Polluting Materials (Verwaltungsvorschrift wassergefährdender Stoffe - VwVwS):

fulfilled. It will generally be specified in the safety data sheet. In the case of mixtures and solutions the component with the highest WGK is, according to the KwS, the determining factor. WGK 1 can generally be obtained by dilution of a WGK material by one or two powers of 10.

liquids into hazard classes A I to A III and B, is no longer applicable. In the future, flammable liquids will be subdivided as follows (in accordance with the hazardous materials act): highly inflammable (flash point < 0°C) easily inflammable (flash point < 21°C)

To reduce a classification from WGK 3 to WGK 2, dilution by at least a second power of 10 is required, while to achieve WGK 1 dilution by at least a fourth power of 10 is required. If an exceptional hazard is involved, e.g. a carcinogenic material, dilution is not permitted.

2. Classification of flammable liquids On 01.01.2003 the German law relating to flammable liquids (VbF) was suspended. It was replaced by the Health and Safety at Work Act (BetrSichV). As a result, the sub-division of combustible

flammable (flash point 21 - 55°C) liquids with a flash point > 55°C Liquids with a flash point of over 100°C are classed as non-inflammable, e.g. lubricating oil. During carriage, the traffic law regulations of the ADR take precedence over those the law relating to flammable liquids (VbF).

WGK 3 strongly water polluting material, e.g. waste oil WGK 2 water polluting material, e.g. diesel, lubricating oil WGK 1 slightly water polluting material, e.g. RME, AdBlue® A catalogue of water polluting materials (KwS) is published as a supplement to the VwVwS, in which individual materials are classified according to their polluting potential. Materials which are not listed here can by classified by the material manufacturer, acting under his own responsibility, if the criteria for a particular water polluting class are not clearly

AdBlue® is a registered trademark of the German Automotive Industry Association. Technical specifications and prices subject to change.

4


Protection and safety 3. Examples:

WGK

in accordance with the Hazardous Materials Act

Alcohol (ethanol), acetone

1

highly flammable

Antifreeze (glycol)

1

non-flammable

AdBlue

1

non-flammable

Diesel, heating oil

2

liquid with flash point > 55°C

Standard petrol

3

easily flammable

Unused lubricating oils

2

non-flammable

Waste oil of known origin*

3

liquid with flash point > 55°C*

Waste oil of unknown origin*

3

easily flammable*

Water soluble cutting fluid

3

non-flammable

CHC (Tri, Per, etc.)

3

non-flammable

*Important advice: Your workshop can reduce costs and workload, if waste oils with different origins are kept separate and mixtures with petrol or other solvent residues are avoided.

4. Important legal provisions • Water Resources Management Act (WHG) • State Water Resources Management Act (LWG) • Ordinance on installations handling water polluting substances (VAwS) • Health and safety at work act (BetrSichV) • Technical Regulation for Handling Flammable Liquids (TRbF) • Hazardous Materials Act (GefStoffV) • European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) We will be pleased to advise you.

5. Collection volumes General rule: The collection tray must be able to hold at least 10% of the total storage volume or the contents of the largest container stored above it. The tray volume must therefore be equal to the largest of these two volumes. A special regulation applies in water protection areas: Here, it is necessary to guarantee a 100 % capture volume for the media stored. Material resistance Selection of tray material is dependent on the media stored. In most cases, the high resistance properties of GRP (see page 6), make it a suitable choice.

Technical specifications and prices subject to change.

5


GRP sumps GRP sumps are ideal for the storage of environmentally hazardous substances. GRP is a universally applicable material for the storage of environmentally hazardous substances. The thermosetting plastic base structure in conjunction with the glass fibre reinforcement provide an advantageous fire behaviour and high chemical resistance. GRP sumps combine the properties of steel

and plastic. Due to their absolute corrosion resistance, GRP sumps can be placed directly on the ground. The low installation height facilitates easy handling in factories and workshops.

All sumps are made from glass fibre reinforced plastic (GRP) and have the General Construction Inspection Approval no. Z-40.12-227 granted by DIBt-Berlin for the storage of strongly water polluting substances.

Extremely favourable price-performance ratio Universally applicable e.g. waste oil, lyes and acids 100 % corrosion-resistant Low installation height, because no ground clearances are required (compare steel sump pallets) Minimum inspection requirements, no additional inspection of tray bottom (compare steel sump pallets)

Comparison of the suitability of sump pallets made from different materials (confirmed by independent experts) used with various media typical in industrial concerns and workshops

Material of collection trays

Media stored Waste oil of known origin (flammable, flash point > 55°C)

GRP Steel painted or galvanized PE = polyethylene

X X –

Heating oil and diesel (flammable, flash point > 55°C)

X X –

Petrol, nitro (highly inflammable, easily flammable, flammable)*

Lyes up to pH 8

– X –

X approved and resistant – not approved / not resistant * Special storage space requirements are to be observed. (fire protection, explosion protection).

X X X

Lyes over pH 8

Acids up to 10 % salt solutions pH 6-8 fixing baths

– – X

X – X

Acids up to 20 % battery acid 37 %

X – X

Carboxylic acids above 10 % (except formic acid)

– – –

If necessary, please enquire about individual resistances.

Technical specifications and prices subject to change.

6


GRP sumps

[PG 9]

with general construction inspection approval no. Z-40.12-227

Sump pallet 220/2

Sump pallet 150 for Euro pallets

Sump pallet 220/1

Sump pallet 220/3

Sump pallet 220/4

Sump pallet 65

Sump pallets [PG 9] Designation Type GRP sump pallet 65

External dimensions Collection Loading Quantity Weight Order cm (l x w x h) volume l capacity kg 200 l drums approx. kg no. - without grating 7086 82 x 41 x 23 65 4 - with galvanized steel grating 7717 82 x 42 x 24 65 40 9,5 GRP sump pallet 150 for Euro pallets - without fixture 5113 120 x 80 x 16.5 150 9 - with fixing pins 5114 120 x 80 x 20.8 150 9 - with galvanized steel grating 7963 120 x 80 x 19.0 140 250 25 - with fixing pins and galvanized steel grating 7970 120 x 80 x 23.5 140 250 25 GRP sump pallet 220/1 standard resin - without grating 7867 85 x 85 x 39 210 400 1 13 7868 - with galvanized steel grating 85 x 85 x 40 210 400 1 27 - complete with GRP grating 7869 85 x 85 x 40 210 400 1 20 GRP sump pallet 220/2 standard resin - without grating 6882 128 x 85 x 27 220 800 1 13 - with galvanized steel grating 6875 128 x 85 x 29 220 800 2 33 - complete with GRP grating 6886 128 x 85 x 29 220 800 2 24 GRP sump pallet 220/3 - without grating 7085 188 x 85 x 19 220 1200 1 18 - with galvanized steel grating 7083 188 x 85 x 20 220 1200 3 46 - complete with GRP grating 7286 188 x 85 x 20 220 1200 3 36 GRP sump pallet 220/4 - without grating 6884 128 x 128 x 18 220 1300 1 18 - with galvanized steel grating 6876 128 x 128 x 21 220 1300 4 46 - complete with GRP grating 6943 128 x 128 x 20 220 1300 4 36

Packages Packaging unit / item 5 10

GRP sump pallet 150 without fixture Order no. 7742 7743

GRP sump pallet 220/2 with galvanized steel grating Order no. 7744 7745

Technical specifications and prices subject to change.

7


Accessories for GRP sump pallets

[PG 9]

Accessories for multiple installation [PG 9] Type Front end Adjoining In blocks of 4

Designation Covering strip short Covering strip long Cover plate Covering strip short Covering strip long

Number required 220/2 220/3 1 1 1 1 2 2 -

220/4 1 1 4

Order no. 6967 6968 6969 6967 6968

Front end

Adjoining

In blocks of 4

b Screw on fixing angle for pallets

a

d Loading rails

Steel foot-frame, galvanized

Accessories for GRP sump pallets Designation

c External dimensions Weight Order cm (l x w x h) approx. kg no. 6889 128 x 85 x 11 15

a Steel foot-frame, galvanized (max. drive-under height 96 mm) only for GRP sump pallet 220/2 b Screw on fixing plate for pallets (2 off with screws) only for GRP pallet sump pallet 150 c Edging (4-part), galvanized for sideways insertion in the steel grating, to stop storage material such as small containers, etc. from falling off) d Loading rails, galvanized (2 off), width inside 15 cm 65 Steel grating, galvanized for GRP sump pallet 150 220/1 220/2 220/3 220/4

Mobile sump pallets from GRP

0.5

5112 6990

Edging for steel grating

6878 7641 8121 8176 6883 7084 6885

220/2 mobile

[PG 9]

Sump pallet with hot-dip galvanized grating and hot-dip galvanized chassis with collision protection. 2 steering and 2 fixed castors as well as a pushing bar for trouble-free steering. Designation External dimensions Height of Collection 200 l drum Loading Weight Order Type cm (l x w x h) loading area volume l Items kg approx. kg no. 220/1-mobile 7870 109 x 86 x 108 56 210 1 400 50 220/2-mobile 7834 152 x 86 x 108 44 220 2 800 60

Ă&#x2DC; castors 12.5 cm

Technical specifications and prices subject to change.

8


PE sump pallets PE sump pallets with an ideal price/performance ratio CEMO always offers a suitable solution when it comes to collecting water-polluting substances. Environmentally compatible, proper and safe storage of hazardous materials is an important topic for every company.

Caustic, flammable, explosive, fire-promoting or toxic substances require special care during handling and storage. For purposes of protection and a clean environment, we have developed a range of PE sump pallets which offer great functionality and

high resistance against acids and lyes thanks to the diverse variation options which ensures an ideal price/performance ratio for you.

high chemical resistance great functionality various variants: with fixing pins, feet, skids or rollers

the tray can be placed directly on the floor or a Euro pallet

PE small container and rack trays

PE sump pallet with a collection volume of 242â&#x20AC;&#x2030;l

PE filling station with a collection volume of 450â&#x20AC;&#x2030;l

Technical specifications and prices subject to change.

9


Euro PE sump pallet 250/2

[PG 9] Euro PE sump pallet 250/2 with general construction inspection approval no. Z-40.22-420 • manufactured from high quality polyethylene (HDPE) • high chemical resistance • collection capacity without grating 250 l, with grating 224 l • for storing drums up to 224 l • high functionality • tray can be positioned directly on the floor or on a Euro-pallet • versions with locking pins (for Euro-pallets), feet, runners or castors

Example: suitable for Euro pallets

Euro PE sump pallet 250/2 - RG without approval no. • manufactured from high quality recycled polyethylene • suitable as a collection tray for materials not hazardous to water or for uses for which no approval is required

With 2 runners and steel grating

With steering castors with and without steel grating

Integrated recessed handles for easy lifting With 4 feet and PE grating

Designation / Capacity, l

External dimensions cm (l x w x h)

Capacity Quantity Weight kg 200 l approx. drums kg

Euro PE sump pallet 250/2 ... ... without grating 120.5 x 80.5 x 33 600 120.5 x 80.5 x 33 600 ... with galvanized steel grating 120.5 x 80.5 x 34 600 ... with PE grating Euro PE sump pallet 250/2 with 4 feet ... ... without grating 120.5 x 80.5 x 43 600 120.5 x 80.5 x 43 600 ... with galvanized steel grating 120.5 x 80.5 x 44 600 ... with PE grating Euro PE sump pallet 250/2 with 2 runners ... ... without grating 120.5 x 80.5 x 43 600 120.5 x 80.5 x 43 600 ... with galvanized steel grating 120.5 x 80.5 x 44 600 ... with PE grating Euro PE sump pallet 250/2 mobile with steering and fixed castors* ... 129 x 80.5 x 104 400 ... without grating, with steel baseframe 129 x 80.5 x 104 400 ... with galvanized steel grating 129 x 80.5 x 104 400 ... with PE grating and steel baseframe * Loading height 250/2 mobile 49 cm, castor dia. 12.5 cm

Without approval 250/2 RG Order no.

With General Construction Inspection Approval Order no.

1 2 2

16 29 29

8424 8425 8426

8276 8277 8278

1 2 2

18 31 31

8427 8428 8429

8279 8280 8281

1 2 2

20 33 33

8430 8431 8432

8282 8283 8284

1 2 2

26 37 39

8433 8434 8435

8285 8286 8287

Technical specifications and prices subject to change.

10


Euro PE sump pallet 250/2

[PG 9]

Accessories Description a Locking pins for fixing the Euro PE sump pallet 250/2 onto a Euro pallet (4 pcs. incl. fittings) Steel grating, galvanized for PE sump pallet 250/2 b PE grating for PE sump pallet 250/2 c Sump pallet attachment (height 20.5 cm)

a

a

Order no. 8288 8324 8325 8358

b

c

Packages

Euro PE sump pallet 250/2 - RG, without approval Package unit/item 5 10

Without grating (cf. order no. 8424) Order no. 8436 8437

With steel grating (cf. order no. 8425) Order no. 8438 8439

Euro PE sump pallet 250/2, with General Construction Inspection Approval. Package unit/item 5 10

Without grating (cf. order no. 8276) Order no. 8359 8360

With steel grating (cf. order no. 8277) Order no. 8361 8362

Canister rack system for Euro PE sump pallet 250/2

[PG 9]

The rack system is designed for the Euro PE sump pallet 250/2 in versions: without feet or runners (8276 + 8277), with feet (8279 + 8280) and with runners (8282 + 8283). Loading capacity per storage level: 100 kg.

Euro PE sump pallet with steel grating (8277) and canister rack system base unit (8523)

Euro PE sump (8277), canister rack system base unit (8523) and extension unit (8627)

Designation

Canister rack system base unit for Euro PE sump pallet 250/2, consisting of 4 push-on support elements and one steel grating (excludes sump) Canister rack system attachment unit for Euro PE sump pallet 250/2, consisting of 4 push-on support elements and one steel grating (excludes sump)

Overall Heights of storage dimensions* levels in cm from cm (l x w x h) the ground * 120.5 x 80.5 x 81 33 / 81 120.5 x 80.5 x 129

129

Weight Order approx. kg no. 19

8523

19

8627

* Scope includes Euro PE sump pallet 250/2 with steel grating (8277) Technical specifications and prices subject to change.

11


PE sump pallets

W

[PG 9]

NE

With general construction inspection approval no. Z-40.22-380 (240/2 and 240/4) • manufactured from high quality polyethylene (HDPE) • high chemical resistance • removable perforated plate • forklift-accessible on all four sides (240/4) • forklift-accessible on two sides (240/1, 240/2 and 240/4e)

PE sump pallet 240/2 PE sump pallet 240/1

PE sump pallet 240/4

PE sump pallet 240/4e

Designation PE sump pallet 240/1 PE sump pallet 240/2 PE sump pallet 240/4 PE sump pallet 240/4e

Overall dimensions cm (l x w x h) 100 x 68 x 60 130 x 75 x 44 138 x 129 x 28 245 x 66 x 27

A / B cm C / D cm Load bearing capacity kg 250 37.5 / 81.5 500 27 / 71 40 / 84 1000 1000

Containment capacity l 233 236 242 235

Quantity 200 l drums 1 2 4 4

Weight Order no. approx. kg 10017 17 10018 20 8524 30 10019 26,5

Technical specifications and prices subject to change.

12


Small container/laboratory trays

[PG 9] With general construction inspection approval no. Z-40.22-485 • small container/laboratory trays from polyethylene • fully recyclable • can be used with/without perforated plate • stackable for space-saving storage/transport • non-slip plate surface • maintenance friendly • designed for Euro-pallets

PE sump pallet 30 l

PE sump pallet 100 l with PE grating

PE sump pallet 20 l

PE sump pallet 20 l with PE grating PE sump pallet 40 l with PE grating

Designation PE sump pallet 20 l PE sump pallet 20 l with PE grating PE sump pallet 30 l PE sump pallet 30 l with PE grating PE sump pallet 40 l PE sump pallet 40 l with PE grating PE sump pallet 60 l PE sump pallet 60 l with PE grating PE sump pallet 100 l PE sump pallet 100 l with PE grating

Overall dimensions cm (b x d x h) 60 x 40 x 15.5 60 x 40 x 15.5 80 x 40 x 15.5 80 x 40 x 15.5 80 x 60 x 15.5 80 x 60 x 15.5 100 x 60 x 17.5 100 x 60 x 17.5 120 x 80 x 17.5 120 x 80 x 17.5

Collection volume l l 20 20 30 30 40 40 60 60 100 100

Weight approx. kg 2 3 3 4.5 3.5 6.5 4.5 8.5 7.5 16

Order no. 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725

Technical specifications and prices subject to change.

13


PE collection tray

(Polyethylene)

[PG 9]

with general construction inspection approval no. Z-40.22-388

Suitable for hazardous substance cabinet 13/20... PE collection tray 40 l PE collection tray with frame ... drum racks 360, 540 and hazardous substances racks.

PE collection tray Designation Type PE collection tray 30 PE collection tray 40

without grating complete with steel grating without grating complete with steel grating

External dimensions cm (l x w x h) 98 x 60 x 8,5 98 x 60 x 8,5 130 x 62 x 8 130 x 62 x 8

Collection volume l 30 30 40 40

Loading capacity kg 50 50

Weight approx. kg 4 10 5 13

Accessories Steel grating galvanized for PE collection trays 30 l Steel grating galvanized for PE collection trays 40 l

Order no. 8076 8077 7871 7872 8167 8168

PE collection tray 30 - mobile / twinmobile workshop trolley

PE collection trays With general construction inspection approval no. Z-40.22-388 • c hassis galvanised with 2 steering and 2 fixed castors, dia. 100 mm, as well as a pushing handle for trouble-free maneuvering • for carrying and storage of water-polluting substances such as cleaning agents, pesticides, used oil filters, oil-coated machine components •P  E collection tray can be removed for cleaning • for workshop trolley, the upper support level is provided with corrugated rubber mats (no collection tray)

PE collection tray 30-mobile PE collection tray 30-twinmobile

Corrugated rubber mat for the second support level, see Accessories

Designation PE collection tray 30-mobile PE collection tray 30-twinmobile Workshop trolley Accessories PE collection tray 30 l Galvanised grating for PE collection tray 30 l Corrugated rubber mat 95 x 55 cm for second support level

External dimensions cm (l x w x h) 112 x 63 x 104 118 x 63 x 104 118 x 63 x 104

[PG 9]

Workshop trolley

Collection volume l l 30 30 -

Loading capacity kg 100 2 x 100 2 x 100

Weight approx. kg 28 50 40 4 6 1.5

Order no. 8166 8291 8292 8076 8167 8293

Technical specifications and prices subject to change.

14


Polyethylene folding tray, 20 l [PG 9]

W E N

The extremely flat design of this folding collection tray means it can be transported in any vehicle. It is ideally suited for transporting hazardous materials on construction, agricultural and forestry machines. This saves you unnecessary costs caused by leaking chemicals or oils. • flat design, low space requirement when unfolded (only 8 mm high) • quick assembly with Velcro fasteners • absolutely impervious to liquid • resistant to many chemicals and oils

Designation

Collection Collapsed dim. Expanded dim. Weight Order approx. kg no. cm (l x w x h) volume l cm (l x w x h) Polyethylene folding tray 8966 20 56 x 39 x 16.5 90 x 70 x 0.8 1.1

Packages Package unit/item 5 10

Order no. 8975 8976

Mobile filling station

Optional: the additional super-absorbent Cemsorb tile (see page 58) can colect and trap liquid, thus eliminating sloshing. For easy clean up, the liquid and absorbent tile can be disposed of together.

[PG 9] • made of polyethylene • ideal as a mobile filling station and tray • easy to maintain, fluid flows into front area • easy handling thanks to symmetrical design • all-rubber wheels and steering castors with locks • tensioning belts to secure drums • large filling area with beaded surface, texture traps and reduces fluid movement • sturdy handles • lock-in safety support for easy vertical pick-up and storage of drums • 2 foot recesses facilitate tilting and handling

Designation Mobile filling station

Overall dimensions Containment Quantity Weight Order cm (b x d x h) capacity l 200 l drums approx. kg no. 81.5 x 68 x 174

250

1

42

8528

Technical specifications and prices subject to change.

15


PE filling station 450 l [PG9] With general construction inspection approval no. Z-40.22-380 • made from high-quality polyethylene (PE) • high chemical resistance • collection volume 450 l • suitable as a storage and filling station for two 200-l barrels l (with additional drum pallet for four 200-l drums • can be driven under

PE filling station 450 l

PE filling station with PE drum pallet (accessories)

PE drum pallet (accessories)

Designation PE filling station 450

Overall dimensions cm (l x w x h) 135 x 138 x 64

Accessories for filling station 450 l PE drum pallet

Canister filling stand

94 x 138 x 39

Collection volume l 450 –

Quantity 200 ldrums 2 2

Weight approx. kg 46 15

Order no. 8674 8675

[PG 9]

• facilitates emptying of canisters up to 30 l • cage secures mounting of canisters • precise metering by swivelling of the canister • made from highly resistant stainless steel

Designation External dimensions max. canister dimen- Weight Order Type cm (l x w x h) sions cm (l x w x h) approx. kg no. Canister filling stand 8007 67 x 39 x 74 31 x 29 x 48 5,4 for canisters up to 30 l, made from stainless steel, thus also suitable for use with acids and lyes Technical specifications and prices subject to change.

16


Steel sump pallets

[PG 9] Steel sump pallets

Provide safe storage for water-polluting as well as inflammable substances (previously classed as AI*, AII, AIII and B). • a ll SW sump pallets are equipped with hotdip galvanized, removable gratings • a wide range of models ensures the correct solution for every application • a pproved design • s ump pallets with 100 mm ground clearance permit driving under from all sides. * Special storage space requirements are to be observed. (fire protection, explosion protection).

Sump pallets without grating Designation Type SO1 Type SO2 Type SO4 Type SO4e Type SO8

External dimensions cm (l x w x h) 80 x 80 x 44 120 x 80 x 35 120 x 120 x 26,5 239 x 80 x 23 239 x 120 x 20

Collection volume l 205 205 205 205 205

Capacity / no. of 200 l drums

Collection volume l 205 205 205 205 205

Capacity / no. of 200 l drums 1 x 200 l drum 2 x 200 l drums 4 x 200 l drums 4 x 200 l drums 8 x 200 l drums

1 200 l drums and small container

Loading kg 300 450 900 900 1800

Weight approx. kg 46 48 55 70 88

painted model Order no. 8529 7582 7681 7683 7685

Loading kg 300 450 900 900 1800

Weight painted model approx. kg Order no. 8531 56 7583 66 7688 96 7690 106 7692 171

galvanized model Order no. 8530 7680 7682 7684 7686

Sump pallets with grating Designation Type SW1 Type SW2 Type SW4 Type SW4e Type SW8

External dimensions cm (l x w x h) 80 x 81 x 46 120 x 81 x 36 120 x 121 x 28,5 239 x 81 x 25 239 x 121 x 21

galvanized model Order no. 8532 7687 7689 7691 7693

Packages Packaging unit / item 3 5 10

Designation Type Type SW2 - painted Type SW2 - painted Type SW2 - painted

Order no. 7694 7695 8913

Technical specifications and prices subject to change.

17


Accessories for GRP and steel sump pallets

Type FB2 barrel support

Type FB3 barrel support

[PG 9]

Stackable barrel support (example with 3 drums)

Sump pallets are not part of the equipment supplied.

Barrel support frame for GRP- and steel sump pallets Designation Type FB1 FB2 FB3 Stackable barrel support

External dimensions cm (l x w x h) 60 x 60 x 35 113 x 60 x 35 120 x 60 x 40 63 x 45 x 53

Capacity 1 x 60 l or 1 x 200 l 2 x 60 l or 2 x 200 l 3 x 60 l 1 x 60 l

Weight approx. kg 15 21 17 10

Order no. 7586 7587 7835 7741

Drum stands can be combined with: • GRP sump pallets, see page 7 • PE sump pallets, see page 10 and 12 • steel sump pallets, see page 17 • mobile sump pallets, see page 8, 10 and 19 • ground protection floor elements, see page 24 • drum racks type 120, to obtain a further storage level, see page 26 • harmful substance collection stations, see page 50 and 51 • hazardous substance stations, see page 51 • PE drum depot, see page 52

Sump pallets are not included in the scope of delivery PE barrel support, universal, for 60 l and 200 l drums

PE drum pallet, for 200 l drums

PE barrel support for GRP and steel sump pallets Designation Type PE barrels support PE drum pallet

External dimensions cm (l x w x h) 62.5 x 50 x 40 94 x 138 x 39

Capacity 1 x 60 l or 1 x 200 l 2 x 200 l

Weight approx. kg 6 15

Order no. 7988 8675

Technical specifications and prices subject to change.

18


Mobile steel sump pallets

[PG 9]

• with hot-dip galvanized, removable gratings • 2 steering and 2 fixed castors as well as a pushing bar for trouble-free steering • collection volume 205 l • loading height SW1-mobile 49 cm, loading height SW2-mobile 42 cm Designation External dimensions 200 l drum Loading Weight Order Type cm (l x w x h) items kg approx. kg no. SW1-mobile painted 7397 98 x 81 x 104 1 300 82,5 7398 galvanized 98 x 81 x 104 1 300 82,5 SW2-mobile painted 7399 138 x 81 x 104 2 450 98,5 7400 galvanized 138 x 81 x 104 2 450 98,5 7420 Securing belt for safer transport Ø castors 12,5 cm

Drum handling [PG 9] Drum handling

Drum trolley for the secure transport and placement of drums e. g. on collection trays up to 35 cm high. Simple tilting enables the drum trolley to be used in suitable areas as a filling station.

Drum handling Designation Drum trolley for steel drums, with pneumatic wheels dia. 40 cm and 4 twin barrel rollers, dia. 5 cm Drum trolley galvanized for steel drums, with pneumatic wheels dia. 26 cm Drum trolley for steel drums

Safe working load kg 400 400

Weight approx. kg 23 21

Order no. 7710 8006

Drum trolley galvanized for steel drums

Technical specifications and prices subject to change.

19


IBC bunds (GRP)

[PG 9] Capacity 1.000 l. Bund from glass fibre reinforced plastic, GRP, and optionally with galvanized steel grating for Intermediate Bulk Containers (IBC). The practical storage and filling station for water-polluting and flammable liquids with a flash point > 55 °C (previously AIII). • u niversally applicable e.g. for used oil, lyes and acids • c orrosion resistant With General Construction Inspection Approval no.: Z-40.12-315 Export version without approval. Capacity 1100 l. Without installation

Accessories: collision protection, can holder and base pallet

extremely favourable price-performance ratio universally applicable e.g. waste oil, lyes and acids 100 % corrosion-resistant IBC bunds made of GRP Designation with galvanized steel grating with galvanized steel grating, export version

External dimensions Collection Container at cm (l x w x h) volume l 1000 l / item 162 x 119 x 91 1000 1 162 x 119 x 91 1100 1

Loading Weight Order capacity kg approx. kg no. 7588 1600 93 8665 1600 83

Accessories for IBC sumps made of GRP Designation

Weight Order approx. kg no. 7589 6 7590 4 7591 25

Collision protection Can holder, bearing surface 75 x 28 cm (w x d) Base pallet (ground clearance 90 mm)

Collision protection

Can holder: formed as a drip tray

Base pallet

Technical specifications and prices subject to change.

20


IBC bunds (Polyethylene)

[PG 9] With general construction inspection approval no. Z-40.22-451 • manufactured from high quality polyethylene • high resistance to chemicals • capacity 1100 l • forklift- or walkie-truck-accessible (do not transport when filled)

IBC bund 1100/2 PE with PE perforated plates

IBC bund 1100/1 PE with PE perforated plates

IBC bund 1100/1 PE

Designation IBC bund 1100/1-PE IBC bund 1100/1-PE with PE perforated plate IBC bund 1100/2-PE with PE perforated plate

External dimensions Collection Container at cm (l x w x h) volume l 1000 l / item 145 x 145 x 100 1100 1 145 x 145 x 100 1100 1 245 x 145 x 58 1100 2

Loading Weight Order capacity kg approx. kg no. 8581 2000 75 8582 2000 105 8583 4000 120

Accessories Designation a Filling attachment for IBC bund 1100/1 PE b Filling attachment for IBC bund 1100/2 PE a

External dimensions Containment capacity Weight Order cm (l x w x h) l up to overflow approx. kg no. 8584 59 x 64 x 107 100 10 8585 59 x 64 x 67 100 6

b

IBC bund 1100/2 PE with filling attachment

IBC bund 1100/1 PE with filling attachment

Technical specifications and prices subject to change.

21


IBC bunds (Steel)

[PG 9] • approved for storage of water-polluting and flammable substances • designed for the storage of lare containers such as IBC, ASF- and ASP containers up to 1000 litres • with galvanized, removable grates • 100 mm ground clearance for safe transport • painted (RAL 5002, ultramarine blue) or galvanized • with design approval

IBC bund GGS-e with a canister filling stand GGS-AB and can carrier

IBC bund GGS

IBC bund GGS galvanized

IBC bunds made of steel Designation IBC bund made of steel IBC bund made of steel

Accessories Filling stand (without grating) Can holder for IBC bunds GGS and GGS-e

External dimensions cm (l x w x h) GGS painted 135 x 130 x 76 GGS galvanized 135 x 130 x 76 GGS-e painted 270 x 130 x 45 GGS-e galvanized 270 x 130 x 45

galvanized

135 x 130 x 40 35 x 30 x 19

Collection Container at volume l 1000 l / item 1000 1 1000 1 1000 2 1000 2

-

1 -

Loading Weight Order capacity kg approx. kg no. 7392 2000 180 7393 2000 180 7394 4000 260 7395 4000 260

2000 -

20 4

7396 8740

Technical specifications and prices subject to change.

22


Ground protection systems (Polyethylen)

[PG 9] With general construction inspection approval no. Z-40.22-443 • c an be used as storage/filling station • elements can be combined to cover a complete storage area • connection components (Accessories) permit the lining of surfaces of any size that are suitable as storage and transfilling stations • rugged, removable PE perforated plate • stable PE access ramp with an integrated fixing bolt for connection to the perforated plate, slight inclination for easy loading of the floor elements • perforated plate and access ramp are non-slip

FS 150 / 16 / 16-PE with access ramp

FS 150 / 16 / 16-PE with access ramp

FS 150 / 16 / 8-PE with access ramp

Designation

Overall dimensions cm (l x w x h)

PE ground protection systems Access ramp

FS 150 / 16 / 8-PE FS 150 / 16 / 16-PE AR 150 / 8-PE

Collection volume l

160 x 80 x 15 160 x 160 x 15 129 x 81 x 15

120 240 -

Safe working Weight ap- Order kg prox. kg no. 500 1000 300

24 45 15

8525 8526 8527

Connecting rails and cross connectors as accessories Accessories Designation

Overall dimensions cm (l x w x h) 150 x 4 x 4 70 x 4 x 4 9.5 x 6.7 x 1

Connecting rail, long Connecting rail, short Cross connector

Retainers

dia. cm 8

Order no. 8676 8677 8678

[PG 9]

Retainers from polymer-concrete, suitable for fuel dispensing

areas prevent the uncontrolled spreading of water-polluting liquids in both indoor and outdoor areas. The traversable elements for installation on concrete are highly abrasion-resistant and are resistant to chemicals including CHCs.

Type

Dimensions Containment Weight volume l/m² cm (l x w x h) approx. kg STG 100 x 29 x 6 60 23 STE 25/25 x 29 x 6 60 12 STT 50/25 x 29 x 6 60 15 Manufactured to order. Delivery approx. 3-4 weeks. Installation material

STG STE STT

Order no. 7592 7593 7594

Quantity

Order no. Adhesive 7595 10 kg container Primer 7596 1 kg container To install the retaining sills, you will require the following material quantities: 3.5 kg adhesive and 0.25 kg primer per meter

Technical specifications and prices subject to change.

23


Ground protection systems (Steel)

Cross connector Type KV T connector Type TV Access ramp Type AR Access corner Type AE

[PG 9]

Connecting profile Type VP Surface protection element type FS Access ramp Type AR

Ground protection systems made from steel to ensure safe handling of water-polluting as well as flammable substances (previously classed as AI*, AII, AIII and B). Modular, matched elements enable the lining of any large surfaces to be suited for use as a storage or transfilling station. • suitable for storage of water-polluting and flammable substances • approved design • modular, matched elements •p  ainted (RAL 5002, ultramarine blue) or galvanized • with hot-dip galvanized gratings

System elements Designation Type Ground protection

External dimensions Height Collection Capacity Wheel cm (l x b) cm volume l kg/m² load kg FS 55/13/13 painted 131 x 131 5.5 49 5000 450 FS 55/13/18 painted 131 x 181 5.5 69 5000 450 FS 55/18/18 painted 181 x 181 5.5 96 5000 450 FS 108/13/13 painted 131 x 131 11 105 5000 450 FS 108/13/18 painted 131 x 181 11 146 5000 450 FS 108/18/18 painted 181 x 181 11 202 5000 450 Access ramp AR13 galvanized 126 x 72 5.5 AR18 galvanized 176 x 72 5.5 AE galvanized 72 x 72 5.5 AR13 galvanized 126 x 72 11 AR18 galvanized 176 x 72 11 AE galvanized 72 x 72 11 Manufactured to order. Delivery approx. 3-4 weeks. Galvanized version of ground protection elements upon request.

Weight approx. kg 106 136 201 112 153 209 30 42 21 34 46 23

Order no. 7401 7402 7403 7404 7405 7406 7407 7408 7410 7411 7412 7414

Weight approx. kg 2 3 1 1

Order no. 7415 7416 7418 7419

Fastening elements Designation Type VP13 galvanized VP18 galvanized KV galvanized TV galvanized

External dimensions mm (b x l) 38 x 1280 38 x 1780 200 x 200 200 x 100

Manufactured to order. Delivery approx. 3-4 weeks. Technical specifications and prices subject to change.

24


Drum racks Drum racks for approved and space-saving storage of barrels and other containers. All drum racks are completely hot-dip galvanized and have a corrosion free GRP sump pallet for long-term safe use. Due to their absolute corrosion resistance, GRP sump pallets can be placed directly on the ground.

The low installation height facilitates handling in the factory/ workshop. The different rack models permit filling over the projecting sump pallet even for the most widely varying types of barrels and containers. The rack ensures optimum matching to the actual operating conditions.

Delivered in space-saving individual parts, easily and quickly assembled. Sump pallets with General Construction Inspection Approval no. Z-40.12-227 granted by DIBt-Berlin.

Example: Drum rack type 360

has two grating levels and six dip-in individual drum supports, which can be clipped in different positions in two storage levels. Accessories: Can holder, steel grating for 3rd storage level

quick and easy assembly universally applicable e.g. waste oil, lyes and acids corrosion-resistant 3 storage levels minimum inspection requirements, no additional inspection of sump pallet bottom (compare steel sump pallets)

Accessories

Sump pallet supports for secure standing on uneven ground and to permit driving under the drum rack

Can holder for easy filling of small containers

Rotating roller support for simple movement of drums

Ball valve for quick and simple discharge

Technical specifications and prices subject to change.

25


Drum racks

[PG 9]

60

60

60

Drum rack type 120 Model 1

Drum rack type 120 Model 2

Drum rack type 120 Model 3

Drum rack type 120 for small containers and 60 l barrels Model Designation 1 2 3

Type 120 with GRP sump pallet 65 l … … with drum supports for 2 x 60 l barrels … with grating support for small containers … with drum and grating support for 1 x 60 l barrel and small containers

Overall dimensions cm (l x w x h) 45 x 82 x 131 45 x 82 x 131 45 x 82 x 131

Heights of Weight Order storage levels in approx. kg no. cm from ground 7081 63 / 115 18 7639 60 / 112 21 7640 60 / 112 19

Accessories for drum rack type 120 Steel grating for GRP sump pallet as 3rd storage level Stackable drum support, for an extra storage level for a 60 l drum Can holder for type 120/360/540, galvanized, bearing surface 23 x 11 cm (w x d) Discharge ball valve 1/2", nickel plated brass, angled 90° Discharge ball valve 3/4", nickel plated brass, angled 90°

42 x 80 x 3 63 x 45 x 53

24

6 10 2 1 1

7641 7741 5917 3775 3776

60

Application example: with steel grating for GRP sump pallet as 3rd storage level

60

Application example: with stackable barrel support as an extra storage level for a 60 l drum (see page 18)

Technical specifications and prices subject to change.

26


Drum racks

60

60

60

[PG 9]

60

Drum rack type 360

Drum rack type 540

Application example: with can holder and steel grating as 3rd storage level (accessory)

Application example: with can holder and steel grating as 4th storage level (accessory)

60

60

60

60

60

60 PE collection tray 40 l as accessory

Drum rack type 360 for small containers and up to 6 x 60 l barrels Designation

Overall dimensions cm (l x w x h)

Drum rack type 360 with GRP sump pallet 150 l and drum supports for 6 x 60 l barrels and small containers

132 x 80 x 130

Heights of Weight storage levels in approx. kg cm from ground 69 / 117 60

Order no.

Heights of Weight storage levels in approx. kg cm from ground 69 / 117 / 165 82

Order no.

7642

Drum rack type 540 for small containers and up to 12 x 60 l barrels Designation

Overall dimensions cm (l x w x h)

Drum rack type 540 with GRP collection tray 150 l and drum supports for 6 x 60 l barrels and small containers Expansion unit for type 540 with drum supports for 6 x 60 l barrels and small containers

132 x 80 x 200 132 x 80 x 200

Accessories for drum rack types 360 and 540 Steel grating as 3rd (for type 360) or 4th storage level (for type 540) 130 x 62 x 3 Steel tray 20 l as 3rd (for type 360) or 4th storage level (for type 540) 130 x 62 x 5 PE collection tray 40 l as insert tray (acid-/alkali resistant)* 130 x 62 x 8 Drum supports 3 pcs. per storage level a Drum supports „raising“ 3 pieces for one storage level for optimum emptying of the 60 l drums Edge border (4-part), galvanized for sideways insertion in the steel grating for securing storage material such as small containers, etc. from filling off Can holder for type 120/360/540, galvanized, bearing surface 23 x 11 cm (w x d) Discharge ball valve 1/2", nickel plated brass, angled 90° [PG 1] Discharge ball valve 3/4", nickel plated brass, angled 90° [PG 1] * see page 14

7734

69 / 117 / 165

72

7855

21 21 22

18 19 5 1 1

6817 7799 7871 7800 8254 6990

2 1 1

5917 3775 3776

a

Combined drum rack type 540 and expansion unit type 540

Combined drum rack type 540 and hazardous substance rack 13/20 (see page 30)

Drum supports for optimum emptying of 60 l drums

Technical specifications and prices subject to change.

27


Drum racks Drum rack type 400 Model 1 1 storage level for 1 x 200 l or 2 x 60 l drums

Drum rack type 400 Model 2 2 storage levels for either 1 x 200 l or 2 x 60 l drums

Drum rack type 400 Model 3 1 storage level for 1 x 200 l or 2 x 60 l drums and 1 grating level for small containers

[PG 9]

60

60

60

60

60

60

200

200 60

200

60

200

200

60

60

200

Drum rack type 400 for small containers up to 4 x 60 l barrels Model 1 2 3

Designation Type 400 with GRP sump pallet 220 l … … with barrel support for 2 x 60 l barrels or 1 x 200 l barrel … with barrel support for 4 x 60 l barrels or 2 x 200 l barrels or for for 2 x 60 l drums or 1 x 200 l drum … with barrel support for 2 x 60 l barrels or 1 x 200 l barrel and grating support for small containers

Overall dimensions Heights of cm (l x w x h) storage levels in cm from ground 99 x 128 x 84 62 99 x 128 x 162 62 / 140 99 x 128 x 162

Accessory (see page 25) Sump pallet support for type 400 (pair), sump pallet can be driven under by forklift Storage level for 1 x 200 l or 2 x 60 l drums 99 x 66 x 84 Grating level for small containers 99 x 125 x 84 Rotating roller support for 200 l barrel (pair) Edge border (4-part), galvanized for sideways insertion into the steel grating for securing storage material such as small containers, etc. Can holder for type 400/800, galvanized, bearing surface 18,5 x 11 cm (w x d) Discharge ball valve 1/2", nickel plated brass, angled 90° [PG 1] Discharge ball valve 3/4", nickel plated brass, angled 90° [PG 1]

Weight Order approx. kg no. 41 70

7663 7664

62 / 139

82

7665

15 62 62 66

7

7668 8326 8327 7669 6990

6 2 1 1

7727 3775 3776

Technical specifications and prices subject to change.

28


Drum racks

200

[PG 9]

200

200

200

60

200

200

200

Drum rack type 800 Model 1

200

Drum rack type 800 Model 2

60

60

200

Drum rack type 800 Model 3

200

60

Drum rack type 800 Model 4

60

60

Drum rack type 800 Model 5

60

60

60

60

60

60

Drum rack type 800 Model 6

Drum rack type 800 for small containers and up to 4 x 200 l barrels Model Designation 1 2 3 4 5 6

Type 800 with GRP sump pallet 220 l … … with barrel supports for 2 x 200 l barrels … with barrel supports for 4 x 200 l barrels … with barrel supports for 2 x 200 l barrels and 3 x 60 l barrels … with barrel supports for 2 x 200 l barrels and grating support for small containers … with drum supports for 3 x 60 l barrels … with drum supports for 6 x 60 l barrels

Accessory (see page 25) Tray support for type 800 (pair), sump pallet can be driven under by forklift Storage level for 2 x 200 l drums Storage level for 3 x 60 l drums Grating level for small containers Rotating roller support for 200 l barrel (pair) Edge border (4-part), galvanized for sideways insertion in the steel grating for securing storage material such as small containers, etc. Can holder for type 400/800, galvanized, bearing surface 18.5 x 11 cm (w x d Discharge ball valve 1/2", nickel plated brass, angled 90° [PG 1] Discharge ball valve 3/4", nickel plated brass, angled 90° [PG 1]

Overall dimensions Heights of Weight Order cm (l x w x h) storage levels in approx. kg no. cm from ground 7670 141 x 128 x 84 62 51 7671 141 x 128 x 162 62 / 140 84 7672 141 x 128 x 162 62 / 140 87 7673 141 x 128 x 162 62 / 139 116 141 x 128 x 84 141 x 128 x 162

62 62 / 140

54 90

7674 7675

15 62 62 62 66

10

141 x 66 x 84 141 x 66 x 84 141 x 125 x 84

7679 8328 8329 8330 7669 6990

6 2 1 1

7727 3775 3776

Technical specifications and prices subject to change.

29


Environmental/HazMat racks [PG 9] Environmental/HazMat rack 10/20 For storage of water-polluting substances in small containers up to 30 l capacity. The tray is completely galvanized and can be assembled without screws or tools. It has 5 shelf floors which can be positioned in mounting points that have 25 mm spacing and two 30 l, PE collection trays. General Construction Inspection Approval no. Z-40.22-388. Each level can support up to 200 kg.

Environmental/HazMat rack 10/20

Environmental/HazMat rack 13/20 For storage of water-polluting substances in small containers up to 20 l capacity. It is completely hot-dip galvanized and equipped with a 20 l leak-tight tray bottom welded in accordance with StawaR (German guidelines for the requirements of steel container trays of capacity up to 1000 l) lowest storage level. Each level can support up to 200 kg.

Environmental/HazMat rack 13/20

Environmental/HazMat rack 10/20 for small containers Designation

Overall dimensions cm (l x w x h) 106 x 63 x 200

Environmental/HazMat rack 10/20 for small containers Accessories for Environmental/HazMat rack 10/20 Expansion rack for environmental/HazMat rack 10/20 PE collection tray 30 l as insert tray (acid-/alkali resistant)* Additional shelf floor for Environmental/HazMat rack 10/20 * see page 14

101 x 63 x 200 98 x 60 x 8.5 100 x 60 x 4

Weight approx. kg 44

34 4 4

Order no. 8091

8092 8076 8093

Environmental/HazMat rack 13/20 for small containers Designation Environmental/HazMat rack 13/20 for small containers Expansion unit for Environmental/HazMat rack 13/20 PE collection tray 40 l as insert tray (acid-/alkali resistant)*

Overall dimensions Heights of cm (l x w x h) storage levels in cm from ground 132 x 63 x 200 16/69/117/165 132 x 63 x 200 16/69/117/165 130 x 62 x 8

Weight approx. kg 92 82 5

Order no. 7820 7856 7871

* see page 14

Extra PE collection tray 30/40 l as accessory

Combined Environmental/HazMat rack 13/20 and Environmental/HazMat 13/20 expansion unit Combined Environmental/HazMat rack 10/20 and expansion rack for Environmental/HazMat rack 10/20

Tray bottom sealed by welding in accordance with StawaR Technical specifications and prices subject to change.

30


Environmental/HazMat cabinets The Environmental/HazMat cabinets serve for the safe and approved storage of water and environmentally polluting substances within buildings. They are manufactured from quality steel sheets and provided with folding doors, which are locked using a cylinder lock (two keys). Because the environmental/HazMat cabinets can be locked, access can be restricted to personnel with appropriate training for the handling of hazardous substances. Not suitable for the storage of flammable substances in the work place.

[PG 9]

Example application: The Environmental/HazMat cabinets provide an optimum solution for the storage of pesticides within a communal or agricultural company, because according to VAwS for the storage of pesticides up to 1,000 kg (or 200 kg T & T+), simplified regulations apply (see also page 34).

The CEMO Environmental/HazMat cabinets comply with: • The technical regulations for flammable liquids, TRbF 20 3.1.5.2 (3) and (4) 1. and 2. • The technical regulations for hazardous substances, TRGS 514 1 (1), 1 (2) 4., 1 (3) and TRGS 515 1 (1) and 1 (2) 4., 1 (3) as well as 3.3.3 1. and 2. . • The Hazardous Materials Act GefStoffV §24 (1), (2) and (3). • DIN ISO 14.000 ff

Environmental/HazMat cabinet 13/20

Based on the drum rack 540, the Environmental/HazMat cabinet 13/20 serves for storage of environmentally harmful substances such as pesticides, lubricants, etc. The surface of the cabinet casing is sealed with a high quality powder coating (RAL 7035 light grey). The doors have ventilation slits top and bottom. On the inside of the door is a map case holder in which packing notes, treatment instructions, etc can be properly stored. The base frame and the grating floor are completely hot-dip galvanized. The Environmental/ HazMat cabinet 13/20 is optionally available with a 150 l GRP sump pallet with General Construction Inspection Approval Z-40.1-227 or with a galvanized and welded tray bottom of 20 l capacity as the lowest storage level (in accordance with StawaR). Each level can support up to 200 kg. The shelf depth of 600 mm enables the horizontal storage of 60 l drums incl. discharge valve. The cabinet is delivered ready for assembly.

Insert tray PE

Closed with warning signs

Environmental/HazMat cabinet 13/20 Designation Environmental/HazMat cabinet 13/20 with GRP collection tray 150 l and 4 gratings as well as doors, side parts, roof and rear wall Environmental/HazMat cabinet 13/20 with 3 gratings and 1 x tray bottom 20 l as well as doors, side parts, roof and rear wall

Environmental/HazMat cabinet 13/20 with tray bottom Overall dimensions cm (w x d x h) 132 x 80 x 200 132 x 63 x 200

Weight approx. kg 202 204

Order no. 7954 7956

Accessories 7871 PE collection tray 40 l as insert tray (acid-/alkali resistant)* 130 x 62 x 8 5 7800 Barrel supports 3 off per storage level 1 Please note: For a storage capacity of 100 l or more, approved collection trays are prescribed. The collection volume/size of the collection tray should be sufficient for 10 % of the total volume / or rather minimum capacity of the largest container, depending which is higher. * see page 14 Technical specifications and prices subject to change.

31


Environmental/HazMat cabinets Environmental/HazMat cabinets 10/20, 10/10, 5/20 and 5/10 with General Construction Inspection Z-38.5-213 • TÜV/GS tested • high collection volumes • lockable (2 keys supplied)

[PG 9]

• integrated ventilation gratings above and below • doors with 180° opening angle • support floors designed as a tray • load capacity per tray floor approx. 80 kg • shelf heights can be adjusted in 15 mm steps • light gray baked powder spray finish (RAL 7035)

• labelling with warning signs • map case holder for data sheets, packing notes, etc. • Environmental/HazMat cabinet 10/10 and 5/10 additionally with border strip and rubber mat on top for tool storage

TIP

An approved collection tray is not required for a total storage volume of < 100 l liquid materials. Simple tray bottoms suffice in this case.

Environmental/HazMat cabinet 10/20

Environmental/HazMat cabinet 10/10

Environmental/HazMat cabinet 10/20 and 10/10 Designation

Supplied with:

Environmental/HazMat cabinet 10/20 Environmental/HazMat cabinet 10/10

Bottom tray 1 x 30 l 1 x 30 l

Floor tray 3 x 20 l 1 x 20 l

Overall dimensions cm (b x d x h) 93 x 50 x 195 93 x 50 x 95

Weight approx. kg 75 55

With General Construction Without Inspection Approval approval Order no. Order no. 8547 8035 8548 8133

Accessories 1 set insertable perforated plates (4 pcs.) for Environmental/HazMat cabinet 10/20 20 l floor tray (1 off for repeat ordering) for Environmental/HazMat cabinet 10/20 and 10/10 1 insertable perforated plate (1 pc. for repeat ordering) for Environmental/HazMat cabinet 10/20 and 10/10

Insertable perforated plates as an accessory

20 4.5

8549 8039

8037 8039

5

8551

8041

Border strip and rubber mat for tool storage in the Environmental/HazMat cabinet 10/10

Technical specifications and prices subject to change.

32


Environmental/HazMat cabinets

[PG 9]

Environmental/HazMat cabinet 5/20

Insertable perforated plates as an accessory

Border strip and rubber mat for tool storage in the hazardous substance cabinet 5/10

Environmental/HazMat cabinet 5/10

Environmental/HazMat cabinet 5/20 and 5/10 Designation

Supplied with:

Environmental/HazMat cabinet 5/20 Environmental/HazMat cabinet 5/10

Bottom tray 1 x 16.5 l 1 x 16.5 l

Floor tray 3 x at 10 l 1 x at 10 l

Overall dimensions cm (b x d x h) 50 x 50 x 195 50 x 50 x 95

Weight With General Construction approx. kg Inspection Approval Order no. 8552 50 8553 35

Without approval Order no. 8036 8134

Accessories 1 set insertable perforated plates (4 pcs.) for Environmental/HazMat cabinet 5/20 Floor tray 10 l (1 off for repeat ordering) for Environmental/HazMat cabinet 5/20 and 5/10 1 insertable perforated plate (1 pc. for repeat ordering) for Environmental/HazMat cabinet 5/20 and 5/10

Acid / lye cabinet from PE

11.5 2.5

8554 8555

8554 8040

3

8556

8556

[PG 9] Acid/lye cabinet from PE • for chemicals (acids/lyes) • body and door from PE • with rubber seal • with polycarbonate window • also for storing Cemsorb binders, see page 57, and medicines for animals

Designation Type Acid/lye cabinet 6/9 Accessories Insert shelves, 2 item

External dimensions cm (b x d x h) 56.5 x 37.5 x 85 -

Internal dimensions cm (b x d x h) 53 x 30 x 76 -

Weight approx. kg 13 1

Order no. 8882 8883

Technical specifications and prices subject to change.

33


Storage of Pesticides Advice and regulations (explained according to German law) For the proper storage of pesticides, in principle a large number of laws, ordinances and technical regulations must be observed, which for the general user are frequently difficult to grasp. The following laws and rules are to be observed: • Technical Regulations for Hazardous Substances (TRGS) • Technical Regulations for Inflammable Liquids (TRbF) • Hazardous Materials Act (GefStoffV) • Water Resources Management Act (WHG) • Health and safety at work act (BetrSichV)

• Ordinance for Facilities and Companies Handling Substances Hazardous to Water (VAwS) • Guidelines for fire water retention (LöRüRL) When applied to the relatively small storage quantities in agricultural concerns these laws

are only partially relevant (see the simplified requirements for the storage up to 1 t pesticides). What the farmer must consider when storing pesticides is explained in the appendix.

Simplified requirements for the storage of up to 1 t of pesticides Rules for

Storage quantities up to 1 t

Storage quantity max. 1000 kg of pesticides in their original containers up to 200 kg T/T+ product (of which max. 50 kg T+) Collection tray/sump pallets

For a total volume of <100 l liquid material, an approved collection tray is not necessary. Here, a rack or cabinet with a tray bottom as the lowest storage level is sufficient to prevent pollution. E.g.: CEMO environmental/HazMat cabinet with tray bottom. For a total volume of ≥100 l of liquid material, an approved collection tray is required for at least 10% of the total volume of liquid material or at least the content of the largest container – depending on which is higher. E.g.: CEMO drum rack 360 or 540 with approved sump pallet or CEMO environmental/HazMat cabinet with approved collection tray

User manual

Required

Signs Fire, unshielded light and smoking forbidden. Unauthorized access forbidden. Note: The signs are already attached on the CEMO environmental/HazMat cabinet or are enclosed. Binding agent

Have a chemical binding agent at hand for the absorption of any escaping liquids.

Roofs, walls, doors/gates

Of fire-resistant construction conforming to DIN 4102, e.g. tractor garage

Fire extinguisher

Fire extinguisher PG 12 (with 12 kg ABC dry powder)

Floor

Floor, impervious to liquid, (e.g. concrete), no drains or run-offs

Approval Dependent on the storage quantity of water polluting or flammable liquids. When storing up to 100 l of material of class WGK 3 or 20 l of flammable liquid, class A I, there is no obligation to inform authorities or even ask for permission. When storing water polluting material of class WGK 2 or less or combustible material, class A II, there is also no obligation to inform authorities or even ask for permission. Fire water retention

Not required

Ventilation

Good ventilation of the room must be possible

We would like to advise that local law might differ from above stated.

Technical specifications and prices subject to change.

34


Secure cabinets PROTECTO-LINE FWF 30 and FWF 90 [PG9] Cabinets for proper storage of hazardous materials in accordance with DIN EN 14470-1 and TRbF 20 (appendix L). The secure cabinets PROTECTO-LINE are design approved in accordance with DIN EN 14470-1. The cabinets are resistant to fire for 30 or 90 minutes. In accordance with TRbF 20 (appendix L),up to 200 l AI fluds can be stored in work rooms in secure cabinets FWF30 and up to 450 l AI fluids in safety cabinets FWF90. The outer body consists of a non-combustible material (for FWF90) or BI material (for FWF30). The surface coating is highly resistant to chemicals. Colour light grey, similar to RAL 7035 The secure cabinets are equipped with: • tray bottoms from powder-finished steel plate (3 pcs.) • a bottom tray from powder-finished steel plate with a perforated plate insert • hydraulically damped door closers • door closing system (heat triggered) • ventilation connection • earthing according to BGR 132 • feet adjustable from inside • GS/CE label

Type 6/20

Type 12/20

Secure cabinets PROTECTO-LINE FWF 30 and FWF 90 Designation Type 12/20 - FWF30 12/20 - FWF90 6/20 - FWF30 6/20 - FWF90

External dimensions cm (b x d x h) 119.5 x 59.5 x 196 120 x 59.5 x 196 59.5 x 59.5 x 196 60 x 59.5 x 196

Internal dimensions cm (b x d x h) 107.5 x 51.5 x 160 111.6 x 48.3 x 160.3 47.5 x 51.5 x 160 51.6 x 48.3 x 160.3

Weight approx. kg 226 600 147 340

Order no. 8055 8700 8057 8701

Ventilation system [PG 9] Emerging vapours and gasses must be extracted directly on location. The ventilation systems ensure the ventilation of secure cabinets, barrel cabinets and transferfilling cabinets. The ventilation system must be connected to an existing air-extraction line.

Designation Extraction system with fan and air flow monitoring

External dimensions cm (l x w x h) 26.6 x 50 x 27.4

Order no. 8739

In working rooms, no explosion-hazard area is defined around technically ventilated secure cabinets, insofar as no other sources in the room cause an explosion-hazard area (TRbF 20 appendix L para. 4.1) • supplied ready to plug in • body from non-combustible material (A2), with surface coating • surface: grey, similar to RAL 7035 light grey microper1 • sound pressure level Lp2A: 39 dB(A) • type of protection: IP 55 EExeII T4 • voltage: 230 V • light-emitting diode for functional operation • connecting fitting ND 75 mm

Technical specifications and prices subject to change.

35


Safety storage containers [PG 7] As an accessible store, they offer a compact solution for the storage of hazardous substances/materials. The model series SRC W ensures the safe storage or waterpolluting liquids. Container design: Prefabricated model from galvanized sheet steel. Wall and roof elements from galvanized

trapeze profile corrugated sheet steel. Wall, roof and floor sections made from thick steel plates. Hot dipped galvanized steel sump floor, floor grating removable (loading 1000 kg/m²). Large, single wing door (width 1294 mm) for simple handling. Traversable roof (designed to withstand 125 kg/m² snow load) with drainage via interior gutters. With General Construction Inspection Approval no. Z-38.5-229.

Outdoor storage of flammable material For outdoor storage, hazardous substances/ materials stores do not need not be fire-proof, if: • there is a sufficient safety distance of at least 10 meters to the nearest building or • any building walls closer than this are fire-proof (F 90 according to DIN 4102)

SRC 3.1W painted with 1-wing door (199,6 cm high, 130 cm wide) on the long side

SRC 3.3W galvanized with1-wing door (199,6 cm high, 130 cm wide) on the narrow side • equipped with a technical ventilator (optional, see accessories), water-polluting and flammable fluids can be stored.

SRC 5.1W galvanized with 2-wing door (optional, see accessories)

Safety storage container for water polluting substances/HazMat Designation

Type SRC 1.1W Type SRC 2.1W Type SRC 3.1W Type SRC 3.2W Type SRC 3.3W Type SRC 4.1W Type SRC 5.1W

External dimensions cm (l x w x h) 235 x 91.5 x 234 235 x 195 x 234 298.5 x 235 x 234 471 x 298.5 x 234 705 x 298.5 x 234 402 x 235 x 234 505.5 x 235 x 234

Base surface / m² 2.1 4.6 7.0 14.0 21.0 9.5 11.9

Collection volume l 300 630 1000 2 x 1000 3 x 1000 1350 1700

galvanized model position of door Long side Narrow side Order no. Order no. 8043 – 8044 8743 8744 8045 8745 8209 8746 8749 8747 8750 8748 8751

galvanized and painted position of door Long side Narrow side Order no. Order no. 8210 – 8211 8752 8753 8212 8754 8213 8755 8758 8756 8759 8757 8760

On delivery: Unloading of the goods by the customer.

Safety storage container for water polluting substances/HazMat with heat insulation Designation

Type SRC 1.1T Type SRC 2.1T Type SRC 3.1T Type SRC 3.2T

External dimensions cm (l x w x h)

235 x 91.5 x 239 235 x 195 x 239 298.5 x 235 x 239 471 x 298.5 x 239

Base surface / m² 2.1 4.6 7.0 14.0

Collection volume l

300 630 1000 2 x 1000

galvanized model position of door Long side Narrow side Order no. Order no. 8214 – 8215 8761 8762 8216 8763 8217

galvanized and painted position of door Long side Narrow side Order no. Order no. 8218 – 8219 8764 8765 8220 8766 8221

On delivery: Unloading of the goods by the customer. Technical specifications and prices subject to change.

36


Safety storage containers

[PG 7]

SRC 4.1W galvanized with sliding doors

â&#x20AC;˘ 3-fold overrlapping sliding door, can be opened over the entire width

Safety storage container with sliding door for water-polluting substances Designation Type SRC 3.1W ST Type SRC 3.2W ST Type SRC 3.3W ST Type SRC 4.1W ST Type SRC 5.1W ST

External dimensions cm (l x w x h)

Base surface / m²

298.5 x 237 x 234 473 x 298.5 x 234 707 x 298.5 x 234 402 x 237 x 234 505.5 x 237 x 234

7.0 14.0 21.0 9.5 11.9

Accessories for safety storage containers

Collection volume l

galvanized galvanized and painted Order no. Order no. 8767 8772 1000 8768 8773 2 x 1000 8769 8774 3 x 1000 8770 8775 1350 8771 8776 1700 On delivery: Unloading of the goods by the customer.

Designation a Shelf short, for insertion in, shelf dimensions 100 x 50 cm, 3 shelves (load 120 kg) Shelf long, for insertion in, shelf dimensions 200 x 50 cm, 3 shelves (load 180 kg) b Access ramp, max. wheel load 450 kg, 70 x 120 cm (w x d) c Double wing door, surcharge (199.6 cm high, door wing 125 cm wide, side wing 65 cm) Double wing door insulated, surcharge (199.6 cm high, door wing 125 cm wide, side wing 65 cm) d Ventilator for ventilation in explosion prevention model e Ribbed tube heater 850 W for safety storage container 1.1 T up to 3.1 T in explosion prevention model Ribbed tube heater 1700 W for safety storage container 3.2 T in explosion prevention model Room thermostat for heaters 8225 and 8226 in safety container modules (explosion prevention design) f Oval lamp 60 W in explosion prevention model g Long field lamp 2 x 58 W in explosion prevention model On/off switch IP 54 h Fuse box Delivery with HGV-mounted crane (not discountable) Set of 4 crane eyelets for up to 1 t total load for safety storage container Set of 4 crane eyelets with bars for up to 3 t total load for safety storage container a

Shelf short / long e

b

c

Access ramp f

Weight approx. kg 34 63 34

Double wing door

Order no. 8046 8047 8048 8222 8223 8224 8225 8226 8533 8227 8228 8229 8230 8239 10070 10071 d

Ventilator

g

h

Long field lamp Ribbed tube heater

Oval lamp

Fuse box (example)

Technical specifications and prices subject to change.

37


BCK F90 walk-in fireproof storage

BCK 6N with 2-leaf door on the long side with optional access ramp

BCK interior view with optional small parts rack BCK 6N with 2-leaf door on the narrow side

BCK N walk-in, 2400 width, 2400 height Designation BCK 2N BCK 3N BCK 4N BCK 5N BCK 6N

External dimensions cm Internal dimensions cm (l x w x h) (l x w x h) 204 x 241 x 242 183 x 220 x 210 304 x 241 x 242 283 x 220 x 210 404 x 241 x 242 383 x 220 x 210 504 x 241 x 242 483 x 220 x 210 604 x 241 x 242 583 x 220 x 210

The standardized BCK fireproof storage units were developed with the expertise gained in hundreds of hazardous material storage facilities built to individual customer specifications. The BCK storage units are fireproof inside and outside for up to 90 minutes as required by DIN 4102. They have integrated sumps and are suitable for both indoor and outdoor use. Each BCK storage unit is a separate fire compartment. • F 90 fire protection inside and outside •d  elivered ready for use • stable, welded design • thermally insulated with a high thermal insulation value • with integrated sump made of galvanized sheet steel • load-bearing surface with removable, galvanized steel gratings, 1000 kg/m² • automatically closing doors with anti-panic function • door optionally in the narrow or long side, single- or double-leaf • low threshold, 160 mm • corrosion protection via 2C paint in RAL 9002 grey-white Collection volume l 500 780 1060 1340 1620

Storage capacity m² 4.0 6.2 8.4 10.6 12.8

Order no. 8534 8535 8536 8537 8538

Ex works – Please ask for freight rates! Other sizes, equipment versions and accessories such as technical ventilation, door retainer system with fire detection, heating, air-conditioning, stainless steel collection tray, access ramp, lighting, small parts racks, lightning protection, fire alarm system, fire extinguishing system, etc. upon request. Technical specifications and prices subject to change.

38


BCK F90 Fire protection storage racks Wherever hazardous materials are stored in tanks or IBCs and they are moved with forklifts, fireproof storage units must be used as rack storage. The BCK fireproof rack storage units meet these requirements for safe and environmentally compatible storage. The BCK rack storage units can be used practically anywhere, both indoors and outdoors. They provide fire protection for up to 90 minutes.

Two BCKs prepared for set-up as serial storage units

BCK R 2726

• F90 inside and outside • delivered ready for use • stable, welded design • thermally insulated with a high thermal insulation value • with integrated sump, galvanized • automatically closing doors • set-up as serial facility possible • rack load: 3000 kg for Euro- pallet racks, 4000 kg for IBC racks

BCK racks are easy to load.

BCK drum racks (sump 320 l) Designation BCK R 2726-1-320 BCK R 2726-2-320

External dimensions Compartment dimensions Compartment dimensions Capacity cm (l x w x h) 1st level cm (l x w x h) 2nd level cm (l x w x h) 318 x 174 x 288 270 x 120 x 255 None 3 Euro pallets 318 x 174 x 288 270 x 120 x 120 270 x 120 x 120 6 Euro pallets

Order no. 8539 8540

BCK IBC racks (sump 1000 l) Designation

External dimensions Compartment dimensions Compartment dimensions Capacity Order no. cm (l x w x h) 1st level cm (l x w x h) 2nd level cm (l x w x h) 318 x 174 x 303 270 x 120 x 255 None 2 IBC 8541 BCK R 2726-1-1000 2 IBC+small container rack 318 x 174 x 303 270 x 120 x 150 270 x 120 x 97 8542 BCK R 2726-2-1000

Other sizes available on request.

Temperature sensor for fire detection (accessory)

Ex works – Please ask for freight rates!

Technical ventilation with up to fivefold air exchange (accessories)

Rain gutter over the door (basic equipment), door retainer and overhead door closers with sequential closing configuration for leaf doors (accessories)

Technical specifications and prices subject to change.

39


GRP horizontal cylindrical chemical tank

DWT tank, horizontal

Double-walled, horizontal GRP tank

Made of GRP, chemical protection layer made of special resin Capacity, l (net, 95%)

4000 5000 6000 8000 8000 10000 15000 20000 25000 30000

Dimensions, cm (l x w x h)* 230 x 191 x 207 285 x 191 x 207 336 x 191 x 207 440 x 191 x 207 296 x 233 x 246 362 x 233 x 246 446 x 256 x 266 584 x 256 x 266 724 x 256 x 266 860 x 256 x 266

* Height with fitted cover increases by 35 cm

Tank dia. cm 160 160 160 160 200 200 220 220 220 220

[PG 3]

Weight

approx. kg

410 450 510 660 650 730 1100 1400 1960 2515

Order no. 8111 8112 8025 8113 8114 8115 8116 8117 8384 8385

• with General Construction Inspection Approval no. Z-40.11-479 • double-walled tank made of GRP, weather­resistant and suitable for outdoor installation • intermediate space monitorable with vacuum-based leak detector • with galvanized steel frame • large (nominal diameter DN 500) inspection dome • dome lid (stainless steel) with connections for necessary accessories • ladder to the dome lid • excellent thermal insulation thanks to "sandwich technology" • cover for dome lid available (optional)

Technical specifications and prices subject to change.

40


PROFI-Tank for fresh and waste oil, double-walled two connection flanges (dia. 170 mm) for up to 8 connection options outdoor installation double wall, therefore no bund necessary, even in water protection areas (however check local regulations) easy tank cleaning with maintenance-free, visual leak detector leak indicator (accessory) for connecting up to 25 individual tanks of all sizes 100% corrosion-resistant translucent tank wall for easy filling level monitoring 25 year tank warranty Tank approval no.: Z-40.11-280

anks PROFI t ed O M E C All prov also ap are now leak indicator! ta withou

No leak indicator is necessary for installation, even in water protection areas. The tanks are already equipped with a visual leak detector* which is integrated in the tank wall.

• integrated optical leakage detection • leak detector optional but not required *Protected by patents

CEMO DWT tanks, double-walled, can be retrofitted with a leak indicator (conforming to safety class 1).

• vacuum leakage detection device monitors inner and outer walls • no wall clearance is required with vacuum leakage detector device Technical specifications and prices subject to change.

41


PROFI-tank for fresh and waste oil, double-walled [PG 4] PROFI-tank without accessory with integrated optical leak detection* Capacity l 1300 1500 2000 2350 *Protected by patents

Dimensions cm (l x w x h) 150 x 74 x 156 150 x 74 x 180 200 x 86 x 156 200 x 86 x 180

Weight approx. kg 80 90 100 110

Order no. 7388 7327 7328 7329

Accessories for fresh oil storage tank Designation a Dome lid (steel) with 4 threaded pipe couplings (straight), 2" for filling, also 2", 1 1/2" and 1". Supplied with: a blanking cap for each pipe coupling 2", 1 1/2" and 1". b Dome lid (steel) with 2 threaded tubes (sloping welded), 1 x 2" for filling, 1 x 2" for ventilation and 2 threaded pipe couplings (straight) 2" and 1". Supplied with: Tanker coupling and ventilation cap.

Order no.

a

b

1436 8519

c

d

Accessories for waste oil storage tank c Filling funnel complete, with suction pipe, tanker coupling, ventilation connection and lockable cover, only for DWT tank 1300 and 2000 Padlock for above, galvanised d Dome lid (steel) complete with suction pipe, with pipe couplings, respectively 1 x 2", 1 1/2" and 1". Supplied with: tanker coupling and a blanking cap for each pipe coupling 2", 1 1/2" and 1", for Profi-tank 1300 and 2000 for Profi-tank 1500 and 2350

7331 1490

5322 7332

e

f

g

h

Accessories, general e Vacuum leakage detection device VL 320-420, optical and acoustic Accessories package for single tank leak detector device Base package VL 320-420 for connecting two tanks to the leak detector device Expansion package VL 320-420 for connecting an extra tank to the leak detector f Protective housing for leak detector device includes relay contact for connection of a signal horn when installed outdoors g Complete overfill protection , supply voltage 230 V, consisting of: Level indicator (sensor) with R 1" and 3/4" couplings, display unit (warning unit) with signal lamp and buzzer. h Signal horn for overfill protection also necessary for larger separations between vehicle and tank and for leak detection when mounted in a protective box i Level indicator for oil, 230 V for continuous tank filling level management* j Step, galvanized, step heights 20 cm and 40 cm k Floor support for DWT 1300 and 1500 l Floor support for DWT 2000 and 2350 l with knobs to enable ventilation of the support surface l Tank heater type TH 370, 230 V, Ă&#x2DC; 44 mm, for electric heating of EL grade heating oil and diesel fuel, power: 0.22 kW, self regulating, prevents separation of paraffin at low temperatures

7351 7352 7356 7357 7353 7330

i

j

5269 7796

k

3345 7730 7731 8126

l

* Description see page 103 (Order no. 7795) Technical specifications and prices subject to change.

42


Lubricant Tank GT for fresh and waste oil [PG 4] GRP safety tank, (from glass fibre-reinforced plastic) with contents scale. Approved for indoor and outdoor use for: normal lubricants, vehicle gear oils, hydraulic oils, waste oil of known origin, cooling lubricants and many other liquids and chemicals. For other applications, we can supply GRP bunds, see below.

25 year tank guarantee 100% corrosion-resistant translucent tank wall for easy filling level monitoring

Tank approval no.: Z-40.11-190

Tank without accessories Capacity l

Dimensions cm (l x w x h) 116 x 73 x 161 166 x 73 x 161 216 x 73 x 161

1000 1500 2000

with dome dia. 145 mm

Weight approx. kg 60 80 100

Order no. 1448 1449 1450

Accessories for fresh oil storage tank Designation

Order no.

a Dome lid (steel) with 4 threaded pipe couplings (straight), 2" for filling, also 2", 1 ½" and 1". Supplied with: a blanking cap for each pipe coupling 2", 1 ½" and 1". b Dome lid (steel) with 2 threaded tubes (sloping welded), 1 x 2" for filling, 1 x 2" for ventilation and 2 threaded pipe couplings (straight) 2" and 1". Supplied with: Tanker coupling and ventilation cap. c Hand pump for engine oils up to SAE 50 d Overfill protection complete comprising: level sender (probe) with reducer R 1" and ¾", indicator (warning arrangement) with warning lamp and buzzer. e Signal horn also necessary for larger separations between vehicle and tank

a

b

c

d

e

f

g

h

1436 1451 1452 7330 5269

Accessories for waste oil storage tank f Filling funnel complete with suction pipe, tanker coupling, ventilation connection and lockable lid Padlock for above, galvanised Step, galvanized, step heights 20 cm and 40 cm (fig. page 42) g Dome lid (steel) for waste oil, complete with suction pipe, with pipe couplings respectively 1 x 2", 1 ½" and 1". Supplied with: tanker coupling and a blanking cap for each pipe coupling 2", 1 ½" and 1". h Level measurement unit pneumatic, for retrofitting

7206 1490 3345 5322

7565

Bunds [PG 6] Approved for the CEMO-GT-safety tank. Manufactured from glass fibre reinforced plastic (GRP) with top gripping edge and steel band in the middle of the container. Tank approval no.: Z-40.11-190 Suitable for single tanks 1000 l 1500 l 2000 l

Capacity External dimensions Internal dimensions Weight Order cm bottom (l x w x h) approx. kg no. approx. l cm top (l x w x h) 1160 5125 158 x 87 x 105 145 x 74 x 104 47 1520 5126 203 x 87 x 105 190 x 74 x 104 55 2030 5127 268 x 87 x 105 255 x 74 x 104 69

Technical specifications and prices subject to change.

43


Lubricant Tanks for fresh and waste oil [PG 4] Individual tank from HDPE with integral galvanised sheet steel bund, standard accessories such as filling level indicator, optical leakage detector device, integral carrying handle, no pump.

low overall height

For storage of fresh and waste oil with a flash point > 55° C also approved for indoor installation and in water protection areas without a bund*. Low overall height (up to 1000 l), thus no steps are required when filling with waste oil.

n rotectio llision p 0 l o c h it w 150 llet 00 l and Base pa I tank 10 LT U M r fo

UNI-Tank Single tank as described above with integral foot pallet. Capacity l 400 750 1000 1500

Dimensions cm (l x w x h) 73 x 70 x 117 98 x 77 x 142 128 x 77 x 142 163 x 77 x 185

Approval No. Z-40.21-365 Z-40.21-288 Z-40.21-288 Z-40.21-432

Weight approx. kg 50 66 89 151

Order no. 7979 7379 7380 7881

Weight approx. kg 55 82 100 165

Order no. 7536 7381 7382 7539

MULTI-Tank Single tank as described above with integral sheet steel pallet for driving under with a forklift or hand forklift from any of four sides. Particular advantages: A  pproved for transport according to the ADR, but without a fitted pump. Examination after 2½ years (see ADR 6.5.1.6.4.b).*** L  ower centre of gravity increases stability and improves handling/ transport. Capacity l Dimensions cm (l x w x h) 400 73 x 70 x 117 750 98 x 77 x 146 1000 128 x 80 x 147 1500 164 x 80 x 187

Storage and transport Approval No. Z-40.21-365 / D/BAM6403/31HA1 Z-40.21-288 / D/BAM04022/31HA1 Z-40.21-288 / D/BAM04033/31HA1 Z-40.21-432 / D/BAM6404/31HA1

* National installation laws and conditions must be adhered to - we will be happy to advise. *** The transport approval for all plastic-IBC is limited to 5 years.

Technical specifications and prices subject to change.

44


Lubricant Tanks for fresh and waste oil [PG 4] Accessories for UNI- and MULTI-tank Designation a GRP filling funnel with sealable lid b suction pipe with tanker coupling for UNI/MULTI-Tank up to 1000 l suction pipe with tanker coupling for UNI/MULTI-Tank 1500 l c Hand pump for engine oils up to SAE 50 for UNI/MULTI-Tank up to 1000 l d Overfill protection complete, supply voltage 230 V, comprising: level sender (probe) with reducer R 1" and 3/4", indicator (warning arrangement) with warning lamp and buzzer. e Signal horn for overfill protection also necessary for larger separations between vehicle and tank f Leakage detector device optical and acoustic g Cover, suitable for UNI/MULTI Tank 340 l and 1000 l, made of polyethylene, with a steel frame, also suitable for stacking empty containers on top of each other

Order no. 7389 7390 8323 1452 7330

a

b

c

d

e

f

5269 7391 8909

g

Viscotroll: mobile compact lubricant system [PG 4] Viscotroll

is the ideal oil dispenser solution in all cases, where the drum may have to be moved anywhere within the workshop. Thanks to the electric power supply, connection to any type of socket is possible and no compressed air supply is needed. The unit has a self-priming gear pump, which guarantees a constant flow rate as well as even, pulsation- and noise-free flow. A flowmeter with a display integrated into the nozzle enables exact metering and volume control of the dispensed liquid. Pump technical data - see Viscomat lubricant pump 200/2 page 76. Type Viscotroll 200/2 Viscotroll 200/2 with flowmeter K 400

Mobile compact lubricant system Wheeled barrel carrier of tubular construction complete with nozzle holder, hose holder and drip tray, self-priming pump with connected 230 V AC asynchronous motor with self-ventilation (protection category IP 55), 1" suction hose with foot valve and filter, 4 m pressure hose ½", nozzle with flexible end, drop-free automatic valve.

Weight approx. kg 34 35

Order no. 7909 7910

Viscotroll 200/2 with flowmeter pressure switch with incorporated safety valve available on request

Technical specifications and prices subject to change.

45


Compact lubricant system ECO, pneumatic for fresh oil [PG 4] Single tank from HDPE with integral galvanized steel plate bund, standard accessories such as pallet feet, level indicator, optical leak detector, suction set, pump, 4 m filling hose and manual digital flowmeter, with mounting and drip cup. Without installation. For above ground storage of clean oil with a flash point >55°C. Also approved for indoor installation in water protected areas without a bund*.

a

b

Compact systems with pneumatic pump Individual tank as described above, Pneumatic pump 3:1. Type Capacity l UNI 750 UNI 750 a UNI 1000 b UNI 1000

Dimensions cm (l x w x h) 108 x 77 x 180 108 x 77 x 187 138 x 77 x 180 138 x 77 x 187

Hose 4 m, hose holder 15 m, open rewinder 4 m, hose holder 15 m, open rewinder

Weight approx. kg 90 108 114 132

Order no. 8815 8816 8817 8818

Accessories c Service unit d Spiral hose 5 m for pneumatic pump

7584 7585

c

More accessories see page 76-77.

Pneumatic pump (technical data) Pneumatic pump 3:1, cannot be calibrated ratio 3:1, operation at 6 – 8 bar, max. delivery rate 14 l/min, compressed-air connection ¼˝ IG, medium outlet ½˝ IG, air consumption approx. 330 l/min, Suction connection 1˝ IG, operation, only with service unit, delivery medium oil up to SAE 90

d

**National installation laws and conditions must be adhered to – we will be happy to advise. Technical specifications and prices subject to change.

46


Compact lubricant system ECO, electric for fresh oil [PG 4] Individual tank from HDPE with integral galvanised sheet steel bund, standard accessories such as pallet base, filling level indicator and optical leak indicator, suction kit, pump, filling

hose and digital manual flowmeter, with holder and drip tray. Without installation.

b a

For storage of fresh and waste oil with a flash point > 55° C and approved for use in water protected areas without a bund* when installed indoors.

c

d

Type Dimensions Hose Weight Capacity l cm (l x w x h) approx. kg UNI 750 108 x 77 x 167 4 m, hose holder 90 UNI 750 108 x 77 x 187 15 m, open rewinder 108 a UNI 1000 138 x 77 x 167 4 m, hose holder 114 b UNI 1000 138 x 77 x 187 15 m, open rewinder 132 c UNI 1500** 187 x 77 x 210 4 m, hose holder 168 d UNI 1500** 212 x 77 x 210 15 m, open rewinder 188 ** incl. filling connection with TW coupling, bleeding cap and overfilling protection

Order no. 8251 8679 8252 8680 8681 8682

More accessories see page 76-77.

Electric pumps (technical data) Electric pump 230 V (cannot be calibrated) Gear pump with a delivery rate of 9 l/min, max. delivery pressure 12 bar, suitable for engine, transmission and hydraulic oils up to SAE 140

Electric pump 230 V (cannot be calibrated) with a delivery rate of 9 l/min and max. delivery pressure of 12 bar

**National installation laws and conditions must be adhered to – we will be happy to advise.

Technical specifications and prices subject to change.

47


Collecting and transport container for hazardous materials (HazMat) [PG 4] Mobile hazardous substance collector GS-MOBILE for flammable liquids Approval no. D/BAM 6744/31A (400 l and 600 l), D/BAM 6743/31A (980 l)

indefinite approval period The collection, storage and transport container for flammable liquids without a sump pallet (e.g. waste oil of unknown origin, solvents, thinners and many more, previously classed as AI, AII, AIII and B). The integrated forklift pallet enables easy and safe transport. An integrated funnel with a dirt sieve and a fixed installed suction pipe with tanker coupling simplify filling and emptying. Can be used by anybody. Design: explosion shock-proof

400 l

980 l

Filling funnel dia. 300 mm

GS-MOBILE for A I to A III and B as described above

Capacity Dimensions, cm (l x w x h) l without ventilation pipe 400 96 x 96 x 114 600 96 x 96 x 141 980 121 x 121 x 141

Dimensions, cm (l x w x h) with ventilation pipe 2" 96 x 96 x 310 96 x 96 x 300 121 x 121 x 300

Aâ&#x20AC;&#x2030;I collection container A collection and storage container for inflammable liquids (e.g. waste oil of unknown origin, solvents, thinners, etc., previously classed as AI, AII, AIII and B). The integrated forklift pallet enables easy and safe transport. An integrated funnel with a dirt sieve and a fixed installed suction pipe with tanker coupling simplify filling and emptying.

AI-Sammelbehälter Capacity l 200 Accessories Padlock, galvanised

Diameter cm 70

Weight approx. kg 196 250 310

Order no. 7713 7714 7715

Ventilation pipe 2" can be removed for transport

[PG 9]

Integrated filling funnel with protective strainer and permanently installed suction tube

Height in cm with open closed lid 169 108

Weight approx. kg 56

Order no. 6409 1490

hot-dip galvanised, doublewalled steel container Technical specifications and prices subject to change.

48


Mobile box hazardous materials approved

[PG 9] Mobile box

The stable design enables clean and safe storage of hazardous solid goods belonging to packing groups II or III and is also approved for transport according to ADR, RID and IMDG codes. The container (blue), with a capacity of 170 l or 250 l, and lid (coloured) are easy to handle, even when the container is full. The specially shaped lid enables storage in 2-layers. Up to 8 boxes can be safely stacked on a Euro pallet. The beading in the container wall enables emptying with a rotary forklift. The mobile box is particularly suitable for the following applications: • Collection container for waste and materials such as oil binding agents, paint residues, etc. • Collection and transport container for recycling, cleaning cloths, etc. • Collection container for flammable and polluting substances

up to 8 containers on a Euro pallet, two layer stackable

Mobile box 170 l Packing units/ item

Dimensions per packing unit cm (l x w x h)

1 4 8

60 x 40 x 88 120 x 80 x 88 120 x 80 x 176

Weight approx. kg 12 69 116

red

Order no. / lid green

blue

7718 7721 7724

7719 7722 7725

7720 7723 7726

Mobile box 250 l Packing units/ item 1 4 8

Dimensions per packing unit cm (l x w x h) 60 x 60 x 89 120 x 120 x 89 120 x 120 x 178

Weight approx. kg 15 80 140

red 7805 7807 7809

Order no. / lid green blue 8318 7806 8319 7808 8320 7810 170 l

Red lid version

Green lid version

Lid with PU seal, fire-classified, light and air-tight for moisture-sensitive material

250 l

Blue lid version

lockable mechanism with metal bracket and locking spring

Technical specifications and prices subject to change.

49


HazMat collection stations

[PG 9] Hazardous substance collection stations

with roller floor from glass fibre reinforced plastic (GRP) offer central, safe storage for different containers and liquids. The GRP sump pallet with splash protection wall is suitable to store liquids of all the water-polluting classes. The wide opening, lockable lid with pneumatic springs enables easy loading/unloading and allows outdoor use â&#x20AC;&#x201C; station has galvanised floor frame and roller floor. Protected by patent P 38 01 810.1-09. General Technical Approval Z-40.12-228 granted by DIBt-Berlin.

Gas pressure springs for easy opening

Hazardous substance collection station with roller floor for outdoor installation

GRP hazardous substance collection station with roller floor Model Surface area cm (l x w) with containment space for outdoor installation (with hood) Standard model 200 l 150 x 85 Special model 400 l 150 x 85 for indoor installation (without hood) Standard model 200 l 150 x 85

Height Weight Order no. cm approx. kg 211 226

90 114

3339 3462

138

65

3340

Accessories for hazardous substance collection station with roller floor Moveable pallet, galvanised, with roller floor, for transport of full drums for: Collection station with 200 l containment space 46 x 65 32 Collection station with 400 l containment space 46 x 65 47

â&#x20AC;Ś for indoor installation without hood 22 25

3343 3636

Retrofitting parts for hazardous substance collection station with roller floor Hood, lockable, complete with fittings, suitable for order no. 3340 Exchangeable lock with individual lock Exchangeable lock with simultaneously locking lock

3341 5640 5643

Technical specifications and prices subject to change.

50


HazMat collection stations

[PG 9] Hazardous substance collection station with grated floor

from glass fibre reinforced plastic (GRP) with roller floor, but with galvanised floor frame with grating. With General Technical Approval no. Z-40.12-228 granted by DIBt-Berlin.

Hazardous substance collection station with grated floor for outdoor installation Barrel stand as accessory (see page 18)

GRP hazardous substance collection station with grated floor Model with grated floor 200 l integrated sump pallet for outdoor installation (with hood) for indoor installation (without hood)

Surface area cm (l x w) 150 x 85 150 x 85

Height cm 211 138

Weight Order no. approx. kg 3412 85 5229 60

Accessories for hazardous substance collection station with grated floor Discharge ball valve 1/2", nickel plated brass, angled 90° [PG 1] 1 Discharge ball valve 3/4", nickel plated brass, angled 90° [PG 1] 1

3775 3776

Retrofitting parts for hazardous substance collection station with grated floor Hood lockable, complete with fittings, suitable for order no. 5229 Exchangeable lock with individual lock Exchangeable lock with simultaneously locking lock

3341 5640 5643

… for indoor installation without any hood Barrel stand as accessory (see page 18)

Hazardous substance stations from sheet steel are approved for storage of all waterpolluting as well as flammable substances (previously classed as AI, AII, AIII and B). The robust, lockable construction and the variable internal equipment provides a universal solution. With design approval. 100 mm ground clearance for safe transport.

Hazardous substance station for outdoor installation

Sheet steel hazardous substance station painted, with 225 l containment volume for storing a maximum 2 x 225 l barrels Designation / Type EW2-GH/VbF

External dimensions cm (l x w x h) 142 x 89 x 151

Internal dimensions Loading Weight Order cm (l x w x h) kg approx. kg no. 7597 138 x 85 x 107 1000 212

Technical specifications and prices subject to change.

51


PE Drum depot

[PG 9]

EW

PE Drum depot

N

•w  ith general construction inspection approval Z-40.22-380 • a pproved for the storage of water-polluting and aggressive liquids • s afe storage of 200 l drums indoors or outdoors • c ollection tray, perforated plate and hood in polyethylene (PE) • c ollection tray can be driven under on both sides • h ood with four cut-outs for ground anchoring • two smooth-running, rugged, yet flexible PE blinds for access from both sides (opened either at the front or rear) • 2 storage compartments on the inside side walls • lockable (padlock not included in the scope of delivery) • h igh chemical resistance to aggressive media

Type PE 250-4-GH with hood for storing up to four 200 l drums

Type PE 250-2-GH with hood for storing up to two 200 l drums

Collection tray can be driven under on both sides

Type PE 250-4-GH

Designation PE Drum depot 250-2-GH PE Drum depot 250-4-GH

Collection volume l 224 242

Capacity 2 drums at 200l 4 drums at 200l

lockable (padlock not included in the scope of delivery)

External dimensions cm (l x w x h) 156.5 x 99.5 x 211 156.5 x 162 x 211

Weight approx. kg 111 157

Order no. 8933 8934

Technical specifications and prices subject to change.

52


Safety compact container [PG 7] For storing water-polluting and flammable fluids • with General Construction Inspection Approval no. Z-38.5-229 • all round natural ventilation with micro­ perforation; pests and small animals cannot enter. • walls and roof elements from galvanized steel plate • design: galvanized or galvanized and painted (RAL 5002 ultramarine blue (other RAL colours on request)) • lockable, 1-leaf door (width 1240 mm) • roof traversible, snow load 125 kg/m² • bearing surface with removable galvanized gratings load: 1000 kg/m² • tray material: steel plate S235JR according to DIN EN 10025, galvanized • tray material thickness: 3 mm • ground clearance 100 mm

SKC 4/240 galvanized and painted SKC 2/240 H galvanized

Safety compact container, collection volume 240 litre Designation

External dimensions cm (l x w x h)

SKC 2/240 SKC 2/240 H SKC 4/240 SKC 4/240 H

152.5 x 125 x 169.9 152.5 x 125 x 234 152.5 x 155 x 165.9 152.5 x 155 x 230

Internal dimensions cm (l x w x h) 138.4 x 99.4 x 132.2 138.4 x 99.4 x 196.3 138.4 x 129.4 x 132.2 138.4 x 129.4 x 196.3

SKC 2/1000 H galvanized and painted

Capacity 2 drums at 200 l 2 drums at 200 l 4 drums at 200 l 4 drums at 200 l

galvanized model Order no. 8777 8778 8779 8780

galvanized and painted Order no. 8785 8786 8787 8788

SKC 4/1000 galvanized and painted

Safety compact container, collection volume 1000 litre Designation

External dimensions cm (l x w x h)

Internal dimensions cm (l x w x h)

SKC 2/1000 SKC 2/1000 H SKC 4/1000

152.5 x 125 x 200 152.5 x 125 x 234 152.5 x 155 x 195

138.4 x 99.4 x 132.2 138.4 x 99.4 x 196.3 138.4 x 129.4 x 132.2

SKC 4/1000 H

152.5 x 155 x 264

138.4 x 129.4 x 196.3

Capacity 2 drums at 200 l 2 drums at 200 l 4 drums at 200 l or 1 IBC at 1.000 l 4 drums at 200 l or 1 IBC at 1.000 l

galvanized model Order no. 8781 8782 8783 8784

galvanized and painted Order no. 8789 8790 8791 8792

Technical specifications and prices subject to change.

53


Collection containers

54


Collection containers for indoor storage [PG 9] Battery disposal box

Optimal storage and transport system • high density PE plastic (HDPE) • mostly acid-proof • can be loaded up to 1 t, stacked up to 3 t • can be loaded up to 600 kg as individual box, up to 450 kg per box when stacked • up to 6 boxes can be stacked • for transporting old batteries (Rh 2807) in accordance with ADR 4.1.4.1 P801a • stackable and safe for transport • equipped with three runners • labeled with danger warnings

box 610 l

Battery disposal box Capacity l 610 Accessory for battery disposal box Designation Lid for box 610

External dimensions cm (l x w x h) 120 x 100 x 76

Weight approx. kg 41

Order no.

External dimensions cm (l x w x h) 121.5 x 101.5 x 6

Weight approx. kg 7

Order no.

8322

8086

Collection containers for outdoor storage [PG 9] Vehicle battery disposal container

• stable GRP model enables clean and safe storage for old vehicle batteries • approved for transport in accordance with ADR 4.1.4.1 P801a • two ventilation openings and a galvanised steel base frame for stable positioning • all fittings are stainless steel • inserted wooden grate forms a plain base surface • to prevent unauthorised access, the lid can be locked • labeled with danger warnings

Outdo o Indoo r r Vehicle battery disposal container Capacity l 200 400 700

External dimensions cm (l x w x h) 89 x 59 x 81 120 x 80 x 81 134 x 99 x 110

Weight approx. kg 23 37 50

Order no. 3396 3397 3983

Technical specifications and prices subject to change.

55


Funnels / collection trays

[PG 9]

GRP funnel for drum use. Safe seating. No risk of spillage.

The PE collection pan is made from acid-proof plastic.

GRP funnel/PE collection trays Designation GRP funnel

- without lid for 200 l drum - with hinged lid for 200 l drum - without hinged lid for 60 l drum PE collection trays 20 l 55 l

External dimensions cm (l x w x h) Height 15, dia. 56 Height 18, dia. 56 Height 16, dia. 39 69 x 44 x 10,5 101 x 73 x 12.5

Weight Order approx. kg no. 3342 3 5348 5 5493 2.5 6892 1,3 6891 2,8

GRP funnel with hinged lid

PE collection trays

• with swash edge to prevent content spillage • pouring spout for transfilling • robust carrying handles • acid, chemical, oil and petrol resistant • sizes 17 and 58 l, sealable, provided with holder(s) for oil filters • size 58 l is also mobile (wheels on one side)

a

b

c

PE collection trays Designation a PE collection tray b PE collection tray sealable c PE collection tray sealable

Volume l 16 17 58

External dimensions cm (l x w x h) 58 x 47 x 16 61 x 46 x 18 92 x 60 x 25

Weight approx. kg 1.3 2 7.6

Order no. 7906 7907 7908 Technical specifications and prices subject to change.

56


Cemsorb binders "Universal" and "Oil"

[PG 9]

Cemsorb binders are high-performance binders to absorb accidentally discharged or spilled hazardous substances without delay or to prevent them from spreading.

100 l oil (80 kg) Oil binder requirement

+

+

+

4 kg

70 - 140 kg

125 - 250 kg

Polypropylene oil binder felt

Calcinated mineral granulates

Diatomaceous earth

=

=

=

Cemsorb binder "Universal" grey The Cemsorb binder "Universal" was developed to absorb all types of fluids. We do not recommend using it on water surfaces. Please use the Cemsorb binder "Universal" to absorb small quantities of different technical fluids. Cemsorb binder "Oil" blue Cemsorb binder "Oil" was developed to absorb oil and oil derivatives. Cemossorb oil binder is hydroscopic; it does not absorb water.

205 - 330 kg 150 - 220 kg 84 kg

Advantages: • Cemsorb binders absorb up to 18 times their own weight in fluids • Cemsorb binders are simple and easy to use. Simply place them on the spilled fluid, and the fluid is quickly absorbed. The area of the accident or the workplace is soon ready to use again • thanks to their high calorific value, they are well suited for thermal utilisation by incineration

ADVANTAGE: With Cemsorb binders, you can save up to 70 % of the disposal costs compared to conventional binders.

Technical specifications and prices subject to change.

57


Cemsorb binders "Universal" and "Oil"

[PG 9]

Cemsorb binders Designation a Cemsorb cloths Heavy weight Perforated in width direction b Cemsorb cloth roll Heavy weight Transversely perforated c Cemsorb cloth roll Heavy weight mehrfach perforiert d Cemsorb cloth roll Heavy weight Multiply perforated e Cemsorb carpet Heavy weight Non-slip, dense, reinforced f Cemsorb pillow filled with flakes g Cemsorb drum cover

a

Absorption in Dimension l/sales unit. cm 113 40 x 50

Area m²/ sales unit 20

Sales unit 100 cloths / carton

Universal (grey) Order no. 8794

180

40 x 4000

32

2 rolls / carton

9.6

8795

8796

48

40 x 2500

10

3.5

-

8797

103

80 x 3000

24

1 roll / dispenser carton 1 carpet / carton

10,9

-

8798

80

dia. 7.5 x 120

-

20 snakes / carton

8

8799

8800

110

40 x 40

-

16 pillows / carton

8

8801

8802

31.5

dia. 56

6.15

25 items/ plastic bag

2.1

-

8803

b

Cemsorb cloths "Universal"

d

Weight approx. Oil (blue) kg / sales unit Order no. 8793 6

c

Cemsorb cloth roll "Oil"

Multiple Cemsorb cloth rolls "Universal": both sides reinforced, lint-free and perforated

e

g Cemsorb snake "Universal"

f Cemsorb carpet "Universal" with extra-reinforced surface

Cemsorb drum cover "Universal" with reinforced and lint-free surface Cemsorb pillow "Oil"

Technical specifications and prices subject to change.

58


Cemsorb Emergency sets

[PG 9]

Cemsorb-Notfallsets Designation

Capacity

a Cemsorb emergency set

1 pair gloves, 2 disposal sacks, 32 cloths 30 x 30 cm, 1 snake 1.20 m x 7.5 cm, 5 wiping cloths 1 pair gloves, 3 disposal bags, 35 cloths 40 x 50 cm, 3 snakes 1.20 m x 7.5 cm, 1 snake 3 m x 7.5 cm, 2 pillows, 10 wiping cloths 1 sturdy PE box (8953), 100 item cloths Universal (8794), 20 snakes Universal (8800), 1 item emergency set Universal (8805) 1 sturdy PE box (8615), 100 item cloths Universal (8794), 20 snakes Universal (8800), 1 item emergency set Universal (8805)

b Cemsorb spill set

c Cemsorb emergency trolley d Cemsorb emergency box

a

b

Cemsorb emergency set

Cemsorb spill set

Absorption in l/sales unit. 20

Dimension Weight approx. Oil (blue) cm kg / sales unit Order no. 8804 32 x 32 x 16 2

Universal (grey) Order no. 8805

75

50 x 50 x 25

7,5

8806

8807

197

80 x 60 x 53

32

-

10014

197

120 x 60 x 54

35

-

8543

d

c

Cemsorb emergency trolley Cemsorb emergency box"Universal"

b c

Technical specifications and prices subject to change.

59


Cemsorb binder for the fire brigade

[PG 9] Cemsorb binders white

were developed specially for use as oil barriers on bodies of water. They are hydrophobic, therefore do not absorb any water. The floating Cemsorb barriers have a very large capacity and are ideally suited for disaster control.

a Cemsorb cloth roll

b-e Cemsorb barriers

Cemsorb binders for the fire brigade Designation a b c d e

Absorption in l/sales unit Cemsorb cloth roll white, unperforated 180 Cemsorb barriers filled with flakes 152 Cemsorb barriers filled with flakes 114 Cemsorb barriers filled with flakes 254 Cemsorb barriers filled with flakes 228

Flexible sewer cover

Dimension Area m²/ cm sales unit 40 x 4000 32 dia. 13 x 300 dia. 13 x 500 dia. 20 x 300 dia. 20 x 500 -

[PG 9]

Sales unit 2 rolls/carton 4 barriers/ plastic bag 2 barriers/plastic bag 4 barriers/plastic bag 2 barriers/plastic bag

W E N

Weight approx. Order kg/sales unit no. 8810 9,6 8811 12 8812 9 8813 20 8814 18

The sewer covers prevent escaped liquids from passing through drains, grates or manhole covers, thereby protecting sewer systems against pollution. Simply lay the sewer cover over the drain and the leak is stopped. • flexible, polyurethane sealing mat • colour: yellow • not electrically conductive • resistant to oil and most water-based industrial chemicals • adhesive underside • can be used immediately on almost every surface • can be re-used (easy to clean with soap and water) • extremely economical

Flexible sewer cover Designation Flexible sewer cover 70 x 70 cm Flexible sewer cover 91 x 91 cm

External dimensions cm (l x w) 70 x 70 91 x 91

Height 8 mm Order no. 10050 10052

Heigth 13 mm Order no. 10051 10053

Technical specifications and prices subject to change.

60


Eye rinser

[PG 9]

W E N

Eye rinser "eyePOD" The revolutionary eye shower for use everywhere. A water tap becomes an eye rinser at the flick of a wrist. • no additional installation effort • c an be screwed onto all common water taps • normal tap function is retained even when the eye shower is mounted • with thermostat to provide protection against scalding the eyes • made from stainless steel with a polished surface

3 adapters for connection to all common water taps

standard connection with locking nut

When the logo of the eyePOD points upwards then the water tap functions as normal. An integrator perlator ensures optimal control of the water jet. Rotating the front of the eyePOD by 180° brings the two eye showerheads into the correct position and activates them. The water is emitted through the two eye showerheads and can be used for instant eye flushing. When the eyePOD is not in use, the two nozzles point downwards protecting them from dust and dirt.

Eye rinser Designation Eye rinser "eyePOD"

Order no. 10067

Technical specifications and prices subject to change.

61


Mobile oil suction units Electric oil suction unit The mobile oil suction unit meets the growing requirement for sucking waste oil directly out of a car engine via the oil dipstick seating. An integral 12 l reservoir container can hold the removed waste oil directly. The oil suction unit has a special self-priming centrifugal pump which can produce very high vacuum pressures. Technical data Mobile frame complete with: • self-priming centrifugal pump, 230 V, delivery rate 2 to 10 l/min Designation Electric oil suction unit, 12 l

Pneumatic oil suction unit Compressed-air operated mobile oil extractor 65 l Ideal for quick oil changes on larger vehicles such as lorries, tractors, and cars, etc. A vacuum is generated in the tank with the aid of compressed air. The oil can then be decentrally extracted from the engines using the extraction probes, independently of a compressed-air connection. Ideal oil temperature 70 - 80 °C. Tank is drained by compressed air. Designation Pneumatic oil suction unit, 65 l

[PG4]

• vacuum gauge for checking the pump's operation and for successful emptying • suction hose with fast connection for the probes • 4 different suction probes (semi-rigid probe dia. 6 x 800 mm, semi-rigid probe dia. 8 x 800 mm, rigid probe dia. 8 x 650 mm, rigid probe dia. 9 x 650 mm) • removable probe holder with liquid-tight base for collection of any oil drops • removable transparent collection container 12 l • suitable for oils up to SAE 140 Dimensions cm (l x w x h) 32 x 32 x 90

Weight approx. kg 19,5

Order no. 8253

Technical data • mobile 65 l container with level indicator, vacuum indicator and 1-bar relief valve • compressed-air connection ¼" • removable tool tray • extraction hose 2 m with probe adapter • 7 different flexible and rigid probes; direct adapters for Mercedes, VW, BMW and Citroen • Drain hose 2 m • max. extraction volume 52 l

Dimensions cm (l x w x h) 60 x 60 x 86

Weight approx. kg 26,9

Order no. 8726

Boot cleaner [PG 4] Boot cleaner

The boot cleaner is, from a hygiene point of view, a must for every business, every sewage plant, waste site, etc. It enables practical, effort-saving, quick and thorough cleaning of your boots. The boot cleaner is equipped with 3 fixed and one moveable brush with a water connection as well as a slip free standing Type Boot cleaner, stainless steel Boot cleaner with collection tray, stainless steel

surface. Water connection ½". Each model is made from stainless steel. A special solution is available for heavily contaminated areas comprising a boot cleaner with a collection tray for collection and separate disposal of any dirty water that runs off.

Dimensions cm (l x w x h) 48 x 40 x 93 52 x 49 x 97

Order no. 8050 8051

Technical specifications and prices subject to change.

62


Milieu producten van Cemo