Page 1

Lofts

1.2

1.3

(88,105,175)

Key

1.4

(88,105,175)

(88,105,155) (60.64,129.47,125.21)

Grid Points

(82,137,93)

(61.29,56.44,150.82)

(82,137,93)

(65,132,95)

(46,60,123)

(64,131,0)

(150,55,0)

(64,131,0)

(150,55,0)

(0,120,0)

(0,120,0)

(22.8,95.21,0)

(51,0,0)

(150,55,0)

(150,55,0)

(102.59,88.01,0)

(102.59,88.01,0)

(0,120,0)

(46,60,123)

(24,24,116)

(24,24,116)

(64,131,0)

(44,87,120)

(44,70,114)

(44,70,114)

(64,131,0) (0,120,0)

(22.8,95.21,0)

(23,104,0)

(51,0,0)

(51,0,0)

(51,0,0)

Shiyu Chen 913430

Paneling

{Index Selection}

{Index Selection & Curvature Points}

{Index Selection & Curvature Points}

{Index Selection & Curvature Points}

2.1

2.2

2.3

2.4

{Attractor Point Location}

{Curve Attractor Points}

{Random Attractors & Manual Grid Offset}

{Grid Offset Selection}

3.1

3.2

3.3

3.4

Design Matrix 1:4

The contours have been adjusted bend inwards like that of a ribcage and lungs. This also provides the structure with a sense of movement and directs the eye into the structure rather than just skimming the surfaces.

The surface and panels combine so that parts of the surface is covered by the twisting day.

the contours twist around on the other side of the structure to transition the eye between one surface to the other.

Exploded Isometric 1:1 0

20

60mm

As it tapers toward the bottom corner, the panels get flatter and more open and inclues holes to direct movement and “lengthen� the structure to resemble a wing-like figure.

Attractor / Control Points (X,Y,Z) Attractor / Control Curves

(82,137,123)

(82,137,123)

(44,87,120)

(0,0,0)

(88,105,155) (60.64,129.47,125.21)

Paneling Grid & Attractor Point

Module 02 - Task 01

1.1

Mimicking the panels, the waffle structure follows the idea of triangles and tapers towards a point like shape from wide to narrow.


Grid Manipulation & Attrator Points

1.2

1.3

Attractor / Control Points (X,Y,Z) Attractor / Control Curves Grid Points

Shiyu Chen 913430

Boolean Differences

{Attractor Points}

Attractor Points & Random Attractor

{Attractor Point and Random Attraction}

2.1

2.2

2.3

{Attractor Point Location}

{Attractor Point Location}

{Attractor Point Location}

3.1

3.2

3.3

Design Matrix 1:4

The cut out diamonds from the side of the pyramid reflect its own base shape. While the tips of the diamond taper to the end, those that reach to the other side and go straight through show a changing cross-sections.

The long extended shapes that cut through this solid encompasses the atmosphere of a hallway. It mimicks that of an extensive hallway to stretches out towards an exit. The length of these shapes give the solid a more enclosed, private feel even though it is exposed on the sides.

The ends that meet often provide closure; its structure seems to be concave, encouraging people to look in, or around depending on the direction at which it is pointed. From the outside, it appears that the shape is fairly solid. It is not only until you rotate your view and change the perspective that you see the large holes that open up the structure.

Here, the emptiness can be that of a sheltered lookout.

Isometric 1:1 0

Key (0,0,0)

Shape Transformations & Attractors

Module 02 - Task 02

1.1

20

Solid boolean

60mm

Digital Design Module 2 A1 Pinup - Shiyu Chen  
Digital Design Module 2 A1 Pinup - Shiyu Chen  
Advertisement