Page 1

asmeco

ASMECO

PROTECTIVE COATING Abrasive Blasting & Painting Specialized Protective Coating Tank Lining, Hydro Blasting & Fire Proofing

AL SAKHRA M E T A L C O A T I N G

www.asmeco.net

1


ASMECO

Complete Solution for Protective Coating

2


ASMECO

About Us

Even the best paint or protective coating offers no protection against corrosion, once rust has started eating the metal inside. In this respect, a proper surface preparation is just as important as the surface treatment. By applying the surface cleaning method Abrasive blasting it is possible to remove rust spots, scale, remainders of oxide or paint films and other deposits. Using the process adopted by us, clean to metal surface can be obtained, providing a perfect base for subsequent treatment. Our company is equipped with the infrastructure necessary to ensure perfect workmanship, and has a staff of well-trained and experienced professionals. The continuing education of our colleagues helps us safeguard that the quality of our work never should fail to meet our customers’ expectations

We are based in Sajja Industrial Area, Sharjah, where we have 80,000 ft2 of fully developed manual blasting & painting facilities with loading, unloading and transportation facility, at a competitive price providing delivery on time without compromising on quality. We also have mobile crews that are equipped to carry out services at your yard or workplace. All our work is completed to international standards under the guidance and supervision of NACE certified personnel.

Facilities

3


ASMECO

Services • Epoxies & Polyurethanes • Intumescent Fire Proofing • Phenolic Tank Linings • Inorganic Zn Silicates • Coal Tar Epoxies • GRE, Polyesters & Vinyl Esters • Wrapping Coating

4

Inspection • Surface Profile Test • SSPC PA2 DFT Test • Salt Contamination Test • Low Voltage Holiday Test • High Voltage Holiday Test • Pull off Test for Adhesion


ASMECO

Quality Statement

Our commitment to earning positive leadership in the community is evident through our honesty, integrity and reliability in all our relationships. At ASMECO, we offer a combination of quality workmanship, cost-effectiveness and on-time delivery. More than providing quality service, we share the responsibilities of our customers. We are never satisfied until our customers feel so. As a pioneer in the field, we are a reliable, efficient and service-oriented organization. Our vast experience and knowledge in the specialised industry of anticorrosion technology, enables us to offer quality services of the highest degree to our valued clients.

We recognise the importance of customer requirements and expectations, therefore we are totally committed in delivering our service with guaranteed satisfaction. By complying with International Standards ISO 9001:2008 and incorporating a Quality Management System, our dedicated team of staff are able to maintain a high level of excellence with safety and productivity. We pride ourselves in caring and protecting our environment by adhering to Regulations, remaining knowledgeable within our field and continually improving our business performance.

Our Mission It is our mission to build up a sound business relationship on the basis of reliable work at moderate rates executed with in the specified time schedule.

5


ASMECO

Structural Steel

Surface preparation is the essential first stage treatment of a steel substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system. The performance of a coating is significantly influenced by its ability to adhere properly to the substrate material. Residual mill scale on steel surfaces is an unsatisfactory base to apply modern, high performance protective coatings and is therefore removed by abrasive blast cleaning. Other surface contaminants on the rolled steel surface, such as oil and grease are also undesirable and must be removed before the blast cleaning process. The surface preparation process not only cleans the steel, but also introduces a suitable profile to receive the protective coating. Paint specifications usually comprise a sequential coating application of paints or alternatively paints applied over metal coatings to form a ‘duplex’ coating system. The protective paint

6

systems usually consist of primer, undercoat(s) and finish coats. Each coating ‘layer’ in any protective system has a specific function, and the different types are applied in a particular sequence of primer followed by intermediate / build coats in the shop, and finally the finish or top coat either in the shop or on site. We enable contractors to provide ‘best value’ service to maximise coating performance over structure life and to reduce whole life costs.


ASMECO

Pipe Coating

Steel pipelines are used all over the world for cross country transport of natural gas, crude oil, water, petrochemical and petroleum products at high pressures over long distances. These pipelines are protected against corrosion by external and internal coating systems

Depending on customer specifications, we offer Liquid epoxy coating or Special anticorrosive painting. Suitable for fresh and salt water immersion Effective for speeding up production Suitable for corrosive environments

External coating primarily acts as a barrier between the pipe and its surrounding environment. It is one of the main methods used to protect pipelines from corrosion – often used in conjunction with cathodic protection – and can also provide thermal insulation.

Resistant to many solvents and chemicals Resistant to cathodic disbondment

An internal coating can be applied to reduce friction within a pipeline and enable smoother product transmission, resulting in increased product throughput, reduced operational costs, faster commissioning, and corrosion protection in storage. Internally coating a pipeline also causes less wear to pigs during runs.

7


ASMECO

Petrochemical Coatings

Tanks Coating

Years of service and chemical corrosion can harm the inside of tank preventing it from properly protecting its contents. Tank lining and coating is a key factor in preventing not only product contamination but also corrosion. A wrong choice of tank surface preparation may result in lack of adhesion, solvent entrapment from applying multiple coats too quickly , soluble salt contamination, and/or inadequate ventilation and post cure requirements. We ensure you to get the best possible surface preparation and provide a broad spectrum of surface coating solution of industrial tanks. Our services include standard surface preparation, internal and external coating application.

8


ASMECO

Petrochemical Coatings

Vessels Coating

Pressure vessels are probably the most complicated area to protect. Besides the pressure itself, there are challenges in the chemical processes in the vessel and the temperatures that often accompany them, and it is important to be clear on the exact needs. Metal Coatings supplies refineries and gas companies with safe, durable and cost-effective coating services for petrochemical corrosion protection that we also perform on a variety of substrate types. These cutting-edge coatings provide resistance to corrosion and abrasion, while protecting surfaces from galling, seizing and other metal surface damage. Our teams strive to enhance personnel and equipment safety while offering superior, expedited service to fit the needs of the petrochemical industry.

9


ASMECO

Marine Coating Marine paints and coatings are applied to commercial and military ships (for both salt and fresh water), fixed and floating marine structures such as offshore oil rigs, and recreational boats and yachts. Included are passenger ships, freighters, tankers, container ships, fishing boats and ferries, as well as oil rigs, inland waterway ships, barges and tow boats. Marine coatings are designed with particular functionality properties to best protect and preserve the surfaces to which they are applied. Coatings are applied in accordance with paint manufacturer’s guidelines with all necessary criteria being met prior to commencement of coating and of course carefully complied with during the coating process.

10


ASMECO

Intumescent Coating A coating for steel that can give a highly decorative finish. It works by expanding in a fire, creating a dense char and keeps the failure temperature of the steel below its critical failure level for periods of up to 2 hours Safe, durable and affordable, Intumescent fireproofing is a thin film coating that is applied directly to a variety of otherwise unapproved building materials, allowing them to meet fire code, fire rating and flame spread requirements.

applying fire retardant coatings to doors, columns, and structural steel or as a coating for fire stops, ducting voids and other smoke and fire prevention applications.

Intumescent fireproofing coatings are used indoors and outdoors, can be environmentally friendly and have been proven in service over many years. Intumescent high performance paint can keep construction costs low while preserving focal points and building character. Our crews utilize specialized surface preparation and application techniques when

11


ASMECO

asmeco

AL SAKHRA METAL COATING

P.O Box: 37321, Sharjah – United Arab Emirates | Tel: 00971 6 5540990 | Fax: 00971 6 5540619 Email: mail@asmeco.net | www.asmeco.net

12

Asmeco catalogue  

Asmeco catalogue designed by sanoj saseendran

Asmeco catalogue  

Asmeco catalogue designed by sanoj saseendran

Advertisement