Issuu on Google+

9. Tapes Butalu Crepe Butalu Tape Butaseal Dot-Fix Expansion Tape HCS-Tape High Tech Tape High Tech Tape Transparant Nova Antiskid Tape Nova Clear Tape Nova Pro Tape Nova Structural Tape Novatex Tape Novatex Tape HD Novatex Tape HM Novatex Tape Red / White Novatex Tape Yellow / Black Seal & Bond Foamtape Silicon Repair tape Stripfix Two Way Tape Velfix Velfix Bundle and Tie Vulcanova Tape

BAC BLU BSL DOT EXP HCS HTT HTR NAT NCT PRO NST NTX NTX HD NTXHM NRW NYB SFT SRT SFX TWT VFX VBT VLT

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

www.novatio.com

9.1


9. Tapes

Butalu Crepe SELF-ADHESIVE BUTYL SEALING TAPE ON A STRETCHABLE ALUMINIUM FILM • Easy to obtain a better fit. • Eliminates the need for nails and staples.

BAC General information BUTALU CREPE is a self-adhesive butyl sealing tape on a stretchable strengthened aluminium film. The special gathered aluminium layer can be stretched up to 60%. BUTALU CREPE was developed to make homes airtight to fit the concept of passive home building.

BUTALU CREPE perfectly fits around all uneven shapes and structures.

Technical information and packaging Thickness: 1.2 mm. Colour of butyl: grey. Colour of the aluminium top layer: anthracite. Stretch length: 60%. Tensile strength: 150N/50 mm. Breaking strain: 20% (in length after 60% stretching). Sensitive to solvents: yes. Density: 1.4 g/cm³. Peeling force: >70N. UV resistance: very good. Application temperature: +3°C to +40°C.

Temperature resistance: -30°C to +80°C with peaks to +140°C for 24 hours. Storage 12 months in a dry, sheltered place at a temperature between +5°C and +30°C. Freezing temperatures cannot damage the product. At temperatures higher than +30°C the protective foil can be more difficult to remove.

Applications and use Applications: BUTALU CREPE has uses including finishing roof edges, corners and chimneys. BUTALU CREPE is also an ideal membrane for sealing roof support points. BUTALU CREPE perfectly fits around all uneven shapes and structures such as on roofs, dormer windows, skylights, gutters, pipes, etc.. BUTALU CREPE is compatible with most building materials, metals and synthetics.

Instructions for use: - Remove protective film. - Apply to dry, clean surface. - Press with a roller. It is recommended to first apply a coat of BUTASEAL or SEAL&BOND PH BUTYL to very porous materials to fill uneven surfaces and guarantee sealing.

Product references

9.2

Article nr

Name

Content

Section

603825000

Butalu Crepe

500 x 25 cm

Tapes

www.novatio.com

V0.0


9. Tapes

Butalu Tape EFFICIENT SEALING TAPE FOR PERMANENT REPAIR AND PROTECTION • Very high, immediate adhesion. • Special butyl rubber body. • Very high tear resistance. • Excellent U.V. resistance. • Aluminium support reinforced with synthetic materials. • Lead coloured. • High temperature resistance: -30°C to +100°C. • Adheres to most materials: concrete, stone, lead, zinc, steel, aluminium and glass. • Easy to apply, also in corners and bends. • Can be painted.

BLU General information BUTALU is a sealing tape which consists of a modified butyl rubber body and a complex aluminium support reinforced with synthetic material, and a silicon protective film. Due to the unique composition of the butyl rubber mass, a very high initial adhesion is obtained. The extreme flexible rubber mass adapts itself to each form and fills irregularities in the surface smoothly.

The aluminium support is reinforced with synthetic material and is therefore tear resistant, unalterable and extremely weatherproof. The carrier is lead coloured and can be painted on. BUTALU allows sealing of leaks or finishing off of joints in a quick and very effective way.

Technical information and packaging Thickness: +/- 0.7 mm. Aluminium support: complex aluminium film reinforced with synthetic material. Adhesive mass: modified butyl rubber cold adhesive. Specific weight: 1100 g/m². Peeling force on fireproof cement: at 90°C and 200 mm/min >= 10 N/cm. Temperature resistance: -30°C to +100°C. Application temperature: +5°C to +40°C.

Chemical resistance: water: excellent; Weather conditions: excellent. Hydrocarbons: not resistant. First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • sealing roof joints at: - gutter in zinc or lead - domes - chimneys - feed-through pipes - grates - lead flashings • sealing pipe connections and canals in ventilation, airco, heating systems

• sealing glass or polycarbonate in veranda and greenhouse construction • thermal insulation and corrosion protection in pipelines • sealing and bonding of hinged or moving connections • sealing leaks in waste pipes

Product references

V0.0

Article nr

Name

Content

Section

603059000

Butalu Tape

roll 10m x 50mm

Tapes

603259000

Butalu Tape

roll 10m x 100mm Tapes

603159000

Butalu Tape

roll 10m x 150mm Tapes

www.novatio.com

9.3


9. Tapes

Butaseal DOUBLE-SIDED ADHESIVE ON ROLL BASED ON FLEXIBLE BUTYL RUBBER • Very high "immediate" bonding strength. • For both bonding and sealing. • Temperature resistant from -30°C to +80°C. • Remains flexible, does not harden. • Follows perfectly the unevennesses of the substrate. • Well mouldable. • For both permanent and temporary fixings. • Easy and clean application. • Very good adhesion, also on "difficult" materials. • Available in black and grey.

BSL General information BUTASEAL is a double-sided adhesive and sealing band on roll. BUTASEAL remains flexible and does not harden due to its unique composition based on modified butylene rubbers. BUTASEAL offers a very high immediate bonding strength, even on materials that are difficult to bond.

Due to its flexible composition, BUTASEAL adapts itself perfectly to any substrate and can be used perfectly in combination with one-component adhesives that harden much 'slower'.

Technical information and packaging • Butaseal Black - Thickness: 1.5 mm - Width: 15 mm - Length/roll: 30 m - Mass/m²: 2400g/m² - Tensile strength 100 mm/min.: 0.20 Mpa - Shear strength 10 mm/min.: 0.029 Mpa • Butaseal Light Grey - Thickness: 1 mm - Width: 25 mm - Length/roll: 30 m - Mass/m²: 1600g/m² - Tensile strength 100 mm/min.: 0.19 Mpa - Shear strength 10 mm/min.: 0.026 Mpa

• Flows at 70°C: 0% • Temperature resistance: -30°C+80°C • Application temperature: +5°C • First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-free. Safety measures: consult the Safety Data Sheet.

Applications and use INDUSTRY • flexible bonding - temporary or permanent also on difficult materials • gives an immediate adhesion in combination with SEAL & BOND MS60 • sealing of wire and cable passages • prevents galvanic action in metal constructions • prevents vibrations • makes water- and dampproof • bonding and sealing of PE foil • "instant" sealing on difficult places • as mouldable mastic for problematic cases

AUTOMOTIVE • bonding of plastic foil in doors and roof covering • sealing of front mudguards and bodywok parts • ideal for eliminating vibrations • sealing of cable passages, rear lights, surface mounted sliding roofs • fixing of upright decorative frames • waterproof mounting of antennas

Product references Article nr

9.4

Name

Content

551158000

Butaseal black

551258000

Butaseal Grey

www.novatio.com

Section

15mm x 1,5mm x 30m 25mm x 1 mm x 30m

V0.0

Tapes Tapes


9. Tapes

Dot-Fix

DOT

HIGH TECHNOLOGICAL TRANSPARENT ACRYLIC ADHESIVE IN DOT-FORMATION • No cutting and tearing anymore. • Always the correct dimension in stock. • No waste. • High adhesiveness to most lacquers, synthetic materials and metals. • Ideal permanent adherence of 112 N/ cm² even at temperature variations of -30°C to +100°C. • Good immediate adhesion. • UV and water resistant. • Very good chemical resistance against detergents and alcohol.

General information DOT-FIX is a high technological transparent acrylate adhesive, especially developed for specific applications with a very high peeling and adhesion force. DOT-FIX has a very good chemical resistance to water, detergent, alcohol,...

DOT-FIX is a transparent adhesive that consists of a dot-formation on a protective foil that makes punching or cutting unnecessary.

Technical information and packaging Adhesive: acrylic. Film: polyester, thickness 50 Micron. Covering film: white silicone paper. Colour: white-transparent. Temperature resistance -30°C to +100°C. UV-resistance: OK. Chemical resistance: detergents, alcohol, ok. Moisture resistance: water ok. Fast immediate adhesion according to Test method FTM 9 :20 N/25 mm². Tensile force (FTM 1): 28 N/25 mm². Peeling force 180° (FTM 1): 28 N/25 mm². Shear strength after 2 hrs on fine steel: 1 kg/ 25 mm².

Can be used on: most surfaces: paper, cardboard, wood, metal, plastic film, textile, enamel, painted surfaces, smooth polished natural stone, glass, most plastics and powder paints; Surfaces based on PE, PP, silicones and bitumen must first be tested on adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • DOT-FIX is specially developed to bond quickly, very thin, clean, economical and transparent as well in the industrial, automobile and pharmaceutical sector • fixing of different kinds of strips in the furniture industry • bonding of letters in the advertising world • fixing of front panels, car emblems • DOT-FIX has the best adherence results on smooth and flat surfaces: fixing of nameplates and indication plates on smooth surfaces

• DOT-FIX can also be used on porous surfaces by gently pushing several times on the adhesive. In that way a constructive effect and a thicker adhesive layer are created. • assembling of small applications

Product references Article nr 563101000

V0.0

Name

Content

Section

Dot-Fix

Set 5 sheets 100mmx210mm

Tapes

www.novatio.com

9.5


9. Tapes

Expansion Tape SELF-ADHESIVE, PRECOMPRESSED FOAM TAPE FOR SEALING JOINTS, SEAMS AND FLANGES • Fills in all uneven gaps. • Offers protection against humidity, dust, noise, cold loss and heat loss,... • Has a water-resistant finish. • Very good UV protection. • Very slow expansion. • Does not show any signs of ageing thanks to its synthetic coating. • Free of bitumen and does not run. • Foam tape is impregnated with fireresistant aluminium oxide. • Suitable for even and uneven surfaces. • Meets the BG1 standard and Class B1 fire standard.

EXP General information EXPANSION TAPE is a precompressed, selfadhesive foam tape with a synthetic coating that is impregnated with aluminium oxide. This impregnation ensures that the tape adheres to the joint partition and protects the tape mainly against the weathering and ageing. The tape retains the tensile strength even in cold temperature. The tape meets the Class B1 fire standards.

EXPANSION TAPE is a BG1 approved foam tape, making it suitable for sealing joints, seams and flanges,... as well as offering protection against humidity, dust, heat loss and noise. EXPANSION TAPE is waterresistant and UV-resistant. EXPANSION TAPE remains pressed against both walls in a constant and powerful way.

Technical information and packaging Density: 75 kg/m³ (+/- 8 kg/m³). Tensile strength at break: >200%. Impregnation: alu-oxide and synthetic coating. Colour: black. Fire class: B1 - DIN 4102 Part 1 PNDS04-581. Coefficient of thermal conductivity: 60 mW/ m.K. Root penetration 4062: no penetration. Thermal stability: from -30°C to +85°C. Mould resistant: resistant. Water resistant density: efficient when compressed with a test pressure of 67% 300 Pa, 80% >600 Pa.

Adhesion force: >18N/25mm. Tensile strength: >100kPA ISO 1798. Odour: odourless. UV-resistance: meets DIN 53387 standard. Joint type: smooth-normal; smooth-diagonal; uneven-normal; uneven-diagonal. For PE, PP, silicone and bitumen based surfaces, first test on adhesion. Storage life: 12 months, dry, cool and frostfree. Safety measures: please consult the Material Safety Data Sheet.

Applications and use • expands very slowly, so it can be applied straight from the roll • the higher the ambient temperature, the faster the adhesion • finishing of the most common joints, seams and flanges • joining of masonry with door frames and window frames, concrete columns, façade and roof elements, dilatation joints • after use, the roll must be fastened with a piece of tape to prevent swelling

.

Max expansion BG1 2,5 mm 2,5 mm 2,5 mm 4 mm 4 mm 5 mm 5 mm 5 mm 7 mm 7 mm

0 tape 10 mm 15 mm 20 mm 10 mm 15 mm 10 mm 15 mm 20 mm 15 mm 20 mm

Product references

9.6

Article nr

Name

Content

Section

564102000

Expansion Tape 10/2

roll 12,5 m

Tapes

564152000

Expansion Tape 15/2

roll 12,5 m

Tapes

564202000

Expansion Tape 20/2

roll 12,5 m

Tapes

564103000

Expansion Tape 10/3

roll 10 m

Tapes

564153000

Expansion Tape 15/3

roll 10 m

Tapes

564104000

Expansion Tape 10/4

roll 8 m

Tapes

564154000

Expansion Tape 15/4

roll 8 m

Tapes

564204000

Expansion Tape 20/4

roll 8 m

Tapes

564156000

Expansion Tape 15/6

roll 5,6 m

Tapes

564206000

Expansion Tape 20/6

roll 5,6 m

Tapes

www.novatio.com

V0.0

Max expansie tape 8 mm 8 mm 8 mm 11 mm 11 mm 17 mm 17 mm 17 mm 26 mm 26 mm


9. Tapes

HCS-Tape

HCS

UNIQUE DOUBLE-SIDED ADHESIVE TAPE FOR INDUSTRIAL APPLICATIONS • High initial adhesive strength. • Transparent. • Based on a polyester film and modified acrylic adhesive. • Very high shear strength: 4 kg/cm². • Extremely fine: 220 micron. • Anchors in the base material. • High temperature resistance. • Stretch and shrink proof. • UV-resistant.

General information HCS-TAPE is a double-sided adhesive tape. It has been specially developed for industrial use. The tape has high adhesive power on various plastics and types of metals and is anchored in the base material.

The polyester carrier ensures a very stable and strong tape by which stretching and shrinking are almost non-existing.

Technical information and packaging Adhesive: modified acrylic. Carrier: polyester. Protective film: red polypropylene, 70 micron. Colour: transparent. Temperature resistance: > 175°C. UV-resistance: OK. Gramme mass protective film: 65 g/m². Total thickness without protective film: 220 micron. Tensile strength: 4 kg/cm². Shear strength: 4 kg/cm². Total adhesive strenght is obtained after 24 hours.

Construction of the tape: 1.Protective film: red silicone polypropylene 2.Transparent modified acrylic adhesive 3.Carrier: polyester 4.Transparent modified acrylic adhesive First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet

Applications and use • fixing different types of strips in the furniture industry • bonding of advertising signs • installing and bonding price holders and identification labels • advertising frames and name-plates for publicity purposes

• industrial bonding of air ducts and their connections • cross distributions on glass in combination with a sealingkit • aluminium strips on glass doors/windows

Product references

V0.0

Article nr

Name

Content

Section

555128000

HCS-Tape

roll 50m x 12mm

Tapes

555198000

HCS-Tape

roll 50m x 19mm

Tapes

www.novatio.com

9.7


9. Tapes

High Tech Tape DOUBLE-SIDED TAPE WITH EXTREMELY HIGH ADHESIVE STRENGTH • Structural adhesive on roll. • Replaces screws, blind rivets, welding,... • Avoids damaging of the surfaces. • Very high initial adhesion. • Allows repositioning. • UV-resistant, ideal for permanent fixing. • Moisture-resistant and liquid proof. • High temperature resistance 150°C. • Bonds stainless steel, copper, aluminium, lacquer, varnish, glass, wood, most synthetic materials, tiles,...

HTT General information HIGH TECH TAPE is a tape that can guarantee structural bonding and is made of a closed cell structure and consequently is 100% liquid proof. HIGH TECH TAPE has a high chemical resistance.

HIGH TECH TAPE is very good temperature resistant in negative as well as positive temperature fluctuations. The protective foil can be removed easily.

Technical information and packaging Adhesive: acrylic through and through. Protective foil: red polyethylene. Colour: grey acrylic. Pressure resistance: cures by pressing. Temperature resistance: for 4 hours 150° for 200 hours 90°C. Solvent resistance: non-soluble. UV-resistance: OK. Liquid density: perfect. Shearing force: 72 N/cm².

Max. Tensile strength: 82 N/cm². Density: 740 kg/m². Thickness: 0.8 mm. First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use AUTOMOTIVE • bonding of decorative frames, emblems, electrical components, decorative covers on side mirrors • bonding of roof- and wall panels on framework with buses and trucks, protective strips of vestibules, mirrors, number plates,...

• name- and information plates for permanent attachments • electronics: rails in switch boxes, assembling of all electronics components, even at high temperature fluctuations

INDUSTRY • sanitary and kitchen arrangement: bonding of different accessories and fittings on formica, tiles, metal, inox, lacquer, glass,... Product references

9.8

Article nr

Name

Content

Section

554068000

High Tech Tape

roll 10m x 6mm

Tapes

554128000

High Tech Tape

roll 10m x 12mm

Tapes

554198000

High Tech Tape

roll 10m x 19mm

Tapes

554258000

High Tech Tape

roll 10m x 25mm

Tapes

www.novatio.com

V0.0


9. Tapes

High Tech Tape Transparant UNIQUE TRANSPARENT DOUBLESIDED TAPE WITH A 100% CLOSED CELLULAR STRUCTURE • Pure acrylic adhesive on roll. • Very high Tack-value. • Removable. • Crystal-clear. • Extreme temperature and UV resistance. • Chemical resistant and insoluble!

HTR

General information HIGH TECH TAPE TRANSPARANT is specially developed for permanent bonding and can be used indoor as well as outdoor. HIGH TECH TAPE TRANSPARANT can be used to bond all sorts of materials, like metal, glass, wood and different kinds of plastics.

HIGH TECH TAPE TRANSPARANT has a very good connection and a very high shear strength.

Technical information and packaging Adhesive: 100% acrylic. Protective foil: transparent polyethylene. Colour: transparent. Thickness: 1,0 mm. Pressure sensitivity: cures by pressing. Temperature resistance: -40°C to +120°C. Solvent resistance: insoluble. UV-resistance: good. Moisture resistance: very good. Density: 850 kg/m². Tensile strength: 67 N/cm². Dynamic shearing force: 4900 g/cm.

180° reinforced adherence on stainless steel: 2000 g/cm. Adheres to copper, inox, aluminium, lacquer, varnish, glass, wood, tiles, most synthetic materials, etc... First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use AUTOMOTIVE • replaces pop rivets, welds, screws • bonding of decorative frames, emblems and decorative covers • bonding of weights to light-metal rims INDUSTRY • replaces pop rivets, welds, screws • sanitary and kitchen arrangement: bonding of different accessories and fittings on formica, tiles, metal, stainless steel, lacquer, glass,...

• name- and information plates for permanent fixing • electronics: rails in switch boxes, assembling of all electronic components, even at high temperature fluctuations

Product references

V0.0

Article nr

Name

Content

Section

554065000

High Tech Tape Transparant

roll 10m x 6mm

Tapes

554125000

High Tech Tape Transparant

roll 10m x 12mm

Tapes

554195000

High Tech Tape Transparant

roll 10m x 19mm

Tapes

554255000

High Tech Tape Transparant

roll 10m x 25mm

Tapes

www.novatio.com

9.9


9. Tapes

Nova Antiskid Tape BLACK, SELF-ADHESIVE ANTISKID TAPE • Semi-vulcanised quality rubber on a PVC-film, covered with an acrylic glue. • Very effective antiskid structure. • Does not absorb any moisture or water. • UV- and ageing resistant. • Resists temperatures up to +160°C. • Universal applications, for in- and outdoor use.

NAT

General information NOVA ANTISKID TAPE is a semi vulcanised quality rubber on a PVC film, covered with an acrylate glue. NOVA ANTISKID TAPE is highly temperature resistant at positive or negative fluctuation of temperature.

NOVA ANTISKID TAPE has no water absorbing capacity.

Technical information and packaging Top layer: semi vulcanised rubber. Glue layer: acrylate glue. Intermediate layer: PVC-film. Colour: black. Pressure sensitivity: hardens by pressure. Temp, resistance: resists temp, -30°C to 160°C. Tickness: 1,8 mm. UV-resistance: OK. Non-ageing: OK. Impermeability: excellent.

Hardness: Shore A 85-95. Adhesion on BA-steel: 32,5 N/25mm. First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • as antiskid on cellar stairs, emergency stairs, swimming pools, lubricating stations,... • on entering steps of trucks • as buffer plate on walls and doors

• as antiskid on the bottom of tool kits • as safe bearing surface on e.g. earthmoving machines

Product references

9.10

Article nr

Name

Content

566110000

Nova Antiskid Tape

roll 10cm x 106cm Tapes

www.novatio.com

Section

V0.0


9. Tapes

Nova Clear Tape TRANSPARENT AND SELF-ADHESIVE PU-FILM • High quality polyurethane film with acrylic glue. • Protects against chemical pollution, grit, rust, scratches,... • Protects against wear by vibration and friction. • Thanks to its elasticity of 75% it can be moulded into many shapes. • Temperature resistance of -40°C to +90°C. • Long-life product. • Ideal on hard surface. • Can be lacquered and/or varnished. • Protects aluminium, stainless steel, chromium plate, PU, glass, lacquer, acrylic plastic, ABS,... • Prevents squeeking and improves the impact resistance.

NCT General information NOVA CLEAR TAPE is a high quality, transparent polyurethane film with acrylic glue. NOVA CLEAR TAPE adheres to most synthetics, lacquers, types of metal,... and protects against rust, grit, scratches, friction, vibration, ...

NOVA CLEAR TAPE is 100% transparent and can be moulded and painted.

Technical information and packaging Film: polyurethane. Glue: acrylic glue. Colour: transparent. Application temp.: +8°C to +50°C. Temp, resistance: -40°C to +90°C. Tensile strength: 13,5 N/mm². Elasticity: > 75%. Conservation of quality: for 7 years. Adherence to: raw aluminium, anodised aluminium, stainless steel, chromed steel, polyurethane, glass, acrylic, ABS,... Important: do not apply on soft surfaces or surfaces that can brake, peel, shrink or expand.

Time 20 min. 20 min. 24 uur 24 uur

Grade 90° 180° 90° 180°

Bonding >900 N/m >600 N/m >530 N/m >700 N/m

First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use Protects against: • rust • grit • scratches

• friction • vibrations

Product references

V0.0

Article nr

Name

Content

Section

566315000

Nova Clear Tape

roll 2m x 150mm

Tapes

566330000

Nova Clear Tape

roll 2m x 300mm

Tapes

www.novatio.com

9.11


9. Tapes

Nova Pro Tape THE PROFESSIONAL PROTECTIVE TEXTILE TAPE • A water-resistant PET-coat finished with textile. • Easy to apply manually. • Permits the protection of a closed circuit. • Perfect adhesion, even on difficult materials such as e.g. silicone cables,... • Prevents cracking, squeaking, vibrations and wear. • Esthetical repair for an original look. • Resists ageing. • Temperature resistance from -30°C to +110°C. • Ideal for repair or tap of wire bundles, cable trees, pipes,...

PRO General information NOVA PRO TAPE is a tape that is specially developed to protect cable trees, cable hoses, pipes and tubes manually. The tape has a good temperature resistance and is sound absorbing.

NOVA PRO TAPE resists ageing and rotting. Thanks to the woolly textile and very thin structure of NOVA PRO TAPE overlappings are almost invisible.

Technical information and packaging Based on: PET. Top coat: woolly textile. Adhesive: rubber adhesive. Colour: black. Tensile strength: 40 N/cm. Elongation after fracture: 10-25%. Total thickness: 0.3 mm. Shrink: 0.3 mm. Adhesive power: > 1.5 N/cm. Temperature resistance: from -30°C to +110°C. Solvents: free. NOVA PRO TAPE has a fast immediate adhesiveness on most materials which is 100% optimal after 24 hours.

First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • protection of cables in dashboard or switch boxes against vibrations • protection of cables, tubes, wires, pipes • bundling of cables

• wrapping of repaired wires or bundles • gives your repair an original look • for the installation of LPG • tuning

Product references

9.12

Article nr

Name

Content

Section

553198000

Nova Pro Tape

roll 10m x 19mm

Tapes

www.novatio.com

V0.0


9. Tapes

Nova Structural Tape

NST

General information

BLACK, SELF-ADHESIVE STRUCTURAL FILM • Polymeric high-quality vinylfilm with acrylic glue. • Functional with aesthetical advantages. • Protects against chemical pollution, grit, rust, scratches,... • Protects against wear by vibration and friction. • Temperature resistance of -40°C to +90°C. • Long lifespan and colourfast. • Ideal on hard surfaces. • Protects lacquered bodywork parts in various materials. • Increases the impact resistance. • Original use by different trademarks.

NOVA STRUCTURAL TAPE is a high quality, polymeric vinylfilm that protects weak spots against rubble, scratches, rust,... NOVA STRUCTURAL TAPE protects against wear by vibration and friction.

NOVA STRUCTURAL TAPE adheres to the smoothest plastics, lacquers, aluminium, stainless steel, anodised aluminium, ...

Technical information and packaging Film: structured polymeric vinyl. Glue: acrylic glue. Colour: black. Application temp.: +8°C to +50°C. Temp, resistance: -40°C to +90°C. Tensile strength: 13,5 N/mm². Conservation of quality: for 7 years. Adherence to: untreated aluminium, anodized aluminium, stainless steel, chromium plated steel, polyurethane, glass, acryl, ABS,...

Time Grade Bonding 20 min. 90° >900 N/m 20 min. 180° >600 N/m 24 uur 90° >530 N/m 24 uur 180° >700 N/m First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • interior building: for general maintenance, protection and repairs • as an original protective tape for various car brands: Ford, GM, Volkswagen, Toyota, Nissan, Peugeot, Citroen,... Product references

V0.0

Article nr

Name

Content

Section

566515000

Nova Structural Tape

roll 2m x 150mm

Tapes

www.novatio.com

9.13


9. Tapes

Novatex Tape QUALITY TAPE FOR UNIVERSAL MAINTENANCE AND REPAIR • Woven cloth tape, provided with a polyethylene protection and a strong adhesive coating. • Waterproof. • Extreme high adhesiveness. • Easy to tear, also lengthwise. • Heat resistant up to 95°C. • Adheres to most surfaces.

NTX General information NOVATEX-TAPE is a woven cloth tape, provided with a polyethylene protection and a strong adhesive coating.

NOVATEX-TAPE is easy to tear, also lengthwise.

Technical information and packaging Thickness of tape: 0.279 mm. Tensile strength: 112 N/25 mm. Elongation at break: 9%. Adhesion to stainless steel: 16 N/25 mm. Temperature resistance: normal: -10°C up to 80°C; +95°C for 30 minutes. Material of tape: polyester-cotton cloth laminated to a PE backing. Adhesive: high tack - natural rubber based. Resistance to seawater: only occasional contact. First test foundations based on PE, PP, silicones and bitumen for adhesion.

Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • sealing air ducts and funnels • bundling cables • repairing tarpaulins • keeping objects in place while bonding • temporary fixings - stand buildings • sealing airconditioning ducts • repairing exhaust tubes

• fixing plastic foil for storage • temporary sealing of window and door openings • temporary repair of broken windows • protecting sharp edges and corners • essential in every company car

Product references

9.14

Article nr

Name

Content

Section

561017000

Novatex Tape black

10m x 19mm

Tapes

561027000

Novatex Tape Grey

10m x 19mm

Tapes

561018000

Novatex Tape Black

50m x 50mm

Tapes

561028000

Novatex Tape Grey

50m x 50mm

Tapes

561048000

Novatex Tape Blue

50m x 50mm

Tapes

www.novatio.com

V0.0


9. Tapes

Novatex Tape HD TOP OF THE RANGE TEXTILE TAPE • Woven, tear-resistant textile tape with a soft hotmelt adhesive layer. • Weather and water resistant. • Extremely high level of immediate adhesive power. • Tear resistant. • Temperature resistance from -25°C to +60°C. • Excellent adhesion, even on rough surfaces.

NTX HD

General information NOVATEX TAPE HD is a superior textile tape in the NOVATEX line that easily withstands ageing. This HD version has an extremely soft glue coat that allows adhesion to difficult surfaces, such as carpets and even on stone and concrete. The synthetic rubber glue is furthermore temperature resistant.

The top layer of NOVATEX TAPE HD consists of weather and water resistant PE-coated and tear-resistant textile.

Technical information and packaging Adhesive type: hotmelt / synthetic rubber. Total thickness: 0.26 mm. Adhesion to steel: 30 N/25 mm. Adhesion to PE: 24 N/25mm. Adhesion to stone at 0°C: 30 N/25 mm. Adhesion to stone at 23°C: 27 N/25 mm.

Tear strength: 110 N/25 mm. Solvent-free. Application temperature: from -25°C to +60°C. Temperature resistance: -15°C to +50°C.

Applications and use NOVATEX TAPE HD has a high level of immediate adhesive power on rough surfaces, such as stone, concrete, brick, etc., but also on carpets and even on difficult plastics such as polyethylene.

NOVATEX TAPE HD can also be used at extremely low temperatures down to -25°C.

Product references

V0.0

Article nr

Name

Content

Section

561128000

Novatex Tape HD

roll 50mm x 50m

Tapes

www.novatio.com

9.15


9. Tapes

Novatex Tape HM TEXTILE TAPE WITH A VERY HIGH IMMEDIATE ADHESIVE POWER • Very fast adhesiveness thanks to the Hot-melt glue. • Fine, woven textile tape easy to tear, even lengthwise. • Can be repositioned. • Very good temperature resistance up to 70°C. • Adheres to most surfaces.

NTX-HM

General information NOVATEX-TAPE HM is a fine woven textile tape provided with a strong Hot-melt glue, with a very high immediate adhesive power.

NOVATEX-TAPE HM is easy to tear, even lengthwise.

Technical information and packaging Thickness of the tape: +/- 0.21 mm. Thickness of the glue: +/- 80 micron. Tensile strength: 6,5 KN/m test method GB 7753-87. Temperature resistance: -15°C to +70°C. Elasticity: 25%. Rolling Ball Tack: 4 test method GB 7125-84. Adhesiveness: > 12 hrs test method GB 4851-84.

Colour: yellow. First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • sealing of air ducts • bundling of cables • repair of port sails • third hand fixing • temporary fixings - stand construction • sealing of air-conditioning ducts • repair of exhaust systems • fixing of plastic film for storage • temporary sealing of window and door openings

• temporary repair of broken windows • protection of sharp corners and sides • indispensable in each company car • can be used as marking tape in combination with black NOVATEX-TAPE.

Product references

9.16

Article nr

Name

Content

Section

561038000

Novatex Tape HM

roll 50m x 50mm

Tapes

www.novatio.com

V0.1


9. Tapes

Novatex Tape Red / White

NRW

RED/WHITE TAPE FOR MARKING AND General information SAFETY NOVATEX TAPE RED/WHITE is a barrier tape provided with a strong adhesive coat for interior and exterior use. The tape is easy to tear.

• Water-resistant. • High adhesive strength. • UV-resistant. • Heat resistant to +90°C. • Adheres to most surfaces. • For interior or exterior use.

Technical information and packaging Adhesive: white adhesive coat based on natural rubbers and synthetic resins. UV resistance: good. Base: fabric with PE coating. Total thickness: 0.3 mm. Tensile strength: 137 N/25mm.

Breaking strain: 11%. Peeling force on stainless steel: 9.8 N/25mm. Temperature resistance: from -35°C to +80°C. Shelf life 24 months kept in a dry, cool and frost-free place.

Product references

V0.0

Article nr

Name

Content

Section

561068000

Novatex Tape Red / White

roll 50mm x 50m

Tapes

www.novatio.com

9.17


9. Tapes

Novatex Tape Yellow / Black YELLOW/BLACK TAPE FOR CORDONING OFF AND SAFETY PURPOSES

General information

• Water-resistant. • High adhesive strength. • UV-resistant. • Heat resistant to +90°C. • Adheres to most surfaces. • For interior or exterior use.

Technical information and packaging

9.18

NYB

NOVATEX TAPE YELLOW/BLACK is a barrier tape with a strong adhesive coat for interior and exterior use. The tape is easy to tear. Adhesive: white adhesive coat based on natural rubbers and synthetic resins. UV resistance: good. Base: fabric with PE coating. Total thickness: 0.3 mm. Tensile strength: 137 N/25mm.

Breaking strain: 11%. Peeling force on stainless steel: 9.8 N/25mm. Temperature resistance: from -35°C to +80°C. Shelf life 24 months kept in a dry, cool and frost-free place.

Product references Article nr

Name

Content

Section

561058000

Novatex Tape Yellow / Black

50mm x 50m

Tapes

www.novatio.com

V0.0


9. Tapes

Seal & Bond Foamtape DOUBLE-SIDED FOAMTAPE • Double-sided foam tape with a closed cellular polyethylene foam. • Very high immediate adhesive power. • Large tearing strength. • Very good temperature resistance.

SFT

General information SEAL & BOND FOAMTAPE is a double sided tape that consists of a white, closed polyethylene foam, covered with acrylate glue.

SEAL & BOND FOAMTAPE has a high immediate adhesive power and very good anti-tearing strength.

Technical information and packaging Glue: modified acrylate. Foam: closed cellular polyethylene. Protective foil: blue silicone paper. Density: 55 kg/m³ Adhesive power: 18N/25 mm after 1 minute 19N/25 mm after 20 minutes. Temperature resistance: -40°C to +100°C. Application temperature: +15°C to +30°C.

Thickness: 3mm. Length: 25 meter. First test foundations based on PE, PP, silicones and bitumen for adhesion. Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • assembly of name-plates, letters, decorative strips, emblems, plexiglass, mirrors, displays, …

• ideal for third hand vertical gluing

Product references

V0.0

Article nr

Name

Content

Section

550368000

Seal & Bond Foamtape white

roll 12mm x 25m

Tapes

550369000

Seal & Bond Foamtape black

roll 12mm x 25m

Tapes

www.novatio.com

9.19


9. Tapes

Silicon Repair tape SUPER-POWERFUL SELFVULCANISING TAPE • Pressure resistant to 8 bar. • Heat resistant up to 200°C. • Insulating up to 8000 Volts. • Permanently airtight and liquid-proof. • Instant vulcanisation – even under water. • Leaves behind no glue remains.

SRT

General information SILICON REPAIR TAPE is a silicone tape that meets the highest specifications and can be used as insulation, sealing or repair tape under varying conditions. SILICON REPAIR TAPE can be applied in poor conditions, where preparation is difficult, because it bonds by itself.

The surface therefore does not necessarily have to be cleaned and dried. SILICON REPAIR TAPE remains flexible and resists petroleum (gasoline), oil, acids, solvents, salt water, road salt and UV light. Available in black or transparent, depending on application.

Technical information and packaging Pressure resistance: up to 8 bar Temperature resistance: -60°C to 200°C

Safety measures: please read the safety card

Applications and use • By stretching the tape and tightly (halfoverlapping) wrapping it on top of itself, a permanent bond forms almost immediately. • SILICON REPAIR TAPE is ideally suited for: repairing leaking hoses, sealing pipes

and fittings, insulating electrical wires, corrosion protection, sealing connectors and fittings, protecting rigging and rope ends, marking lines and chains, giving anti-slip qualities to handles and tools,...

Product references

9.20

Article nr

Name

Content

Section

565515000

Silicon repair tape transparent

1 pcs

Tapes

565525000

Silicon repair tape black

1 pcs

Tapes

www.novatio.com

V0.0


9. Tapes

Stripfix

SFX

TRANSPARENT GLUE ON ROLL FOIL, FOR INSTANT BONDING • Requires no drying time. • Safe to use, contains no solvents. • Holds up to 8 kg/cm². • Cut a suitable piece, press together and it's ready! • Good resistance to water, diluted acids, alkalines, mineral oils, ... • Does not dry out or harden. • Can be used as a sealant.

General information STRIPFIX is a synthetic, pressure-sensitive transparent adhesive on roll. It has been designed to provide a very strong bond between a wide variety of materials and substrates. STRIPFIX can be used immediately on clean, dry and grease-proof surfaces.

STRIPFIX is excellent for bonding "difficult" materials such as glass, metal, wood, rubber and plastics including polyethylene.

Technical information and packaging Composition: rubber / resin. Elongation: 1000%. Initial adhesive strength: 52 N/cm². Tensile strength: 60 N/cm² after 10 min.; 80 N/cm² after 24 hours. Application weight: 405 g/m². Temperature resistance: -10°C to +50°C. Static shear FTM8: 0,5kg -25mm x 25mm/ +20°C Application temperature: > +10°C. Water absorption: 0%.

Thickness: 0,4 mm. Pressure needed to achieve 20% compression: 1,6 kg/cm². U.V. resistance: bad - exposure to UV light should be avoided. Tolerance: thickness and width < 10%. Shelf life: 12 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use BUILDING • mounting of connections for protective plates of drain pipes, insulating material in polypropylene, filter membranes for road construction • bonding of light insulating plates, connections in synthetic material,...

CAR INDUSTRY • fixing of insulating material, name-plates and signs,... CONSTRUCTION • bonding of side and roof panels on caravans

FURNITURE INDUSTRY • mounting of laminated decorative frames • fixing of corners on furniture Product references

V0.0

Article nr

Name

Content

Section

521208000

Stripfix

roll 30m x 12mm

Tapes

521908000

Stripfix

roll 30m x 19mm

Tapes

www.novatio.com

9.21


9. Tapes

Two Way Tape DOUBLE SIDED FOAM TAPE FOR PERMANENT ATTACHMENT • Extra strong, high tensile strength an elasticity. • Oil, petrol, diesel, chemical and weather resistant. • Clean and simple to use. • Permanent adhesion on clean surfaces. • Repositionable.

TWT General information TWO WAY TAPE consists of a 0.8 mm black, cross-linked, closed cell, polyethylene foam, coated on both sides with an acrylic adhesive. TWO WAY TAPE offers very high adhesive and cohesive properties, with the possibility of repositioning.

TWO WAY TAPE has a high holding power and an excellent resistance to weathering and oil. TWO WAY TAPE is available in five different dimensions to make the job easier.

Technical information and packaging Foam: black, cross-linked, closed-cell polyethylene. Adhesive: acrylic resin, reacts to pressure. Backing: one side silicone coated green polyethylene film. Density: 100 kg/m³ Adhesion to steel: 1365g/20 mm (7 days/ 20°C). Shear strength: 7.5 kg/cm². Features: high holding power; excellent resistance to weathering and oil.

End use temperature range after 7 days: -40°C to +100°C. Min. application temperature: +10°C. Thickness: 0.9 mm. First test foundations based on PE, PP, silicones and bitumen for adhesion (see each tape). Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • mounting of automotive side mouldings and emblems • mounting of name-plates and letters • mounting of interior and exterior coverings

• mounting of air-spoilers • mounting of electronic components • ideal for use with high fluctuations of temperature

Product references

9.22

Article nr

Name

Content

Section

550068000

Two Way Tape

roll 6mm x 10m

Tapes

550128000

Two Way Tape

roll 12mm x 10m

Tapes

550158000

Two Way Tape

roll 15mm x 10m

Tapes

550198000

Two Way Tape

roll 19mm x 10m

Tapes

550258000

Two Way Tape

roll 25mm x 10m

Tapes

www.novatio.com

V0.0


9. Tapes

Velfix

VFX

General information VELCRO SYSTEM FOR FAST AND EASY MOUNTING AND DISMOUNTING VELFIX is a high-quality Velcro system woven

• Up to 10.000 times opening and closing. • 100 % polyamide tissue. • Provided with an acrylate adhesive. • Good temperature resistance. • Good adhesion, also on uneven surfaces. • Adhesive layer does not damage the surface. • Ideal for "blind" fixings. • 4 types available: - hook band - loop band (to be used with hook band) - special "harpoon" design for a direct adhesion on carpets - back-to-back for bundling and keeping together.

of 100% polyamide and is provided with an acrylate adhesive water-based layer. Due to the fine weaving structure, VELFIX shows no elongation or shrinkage, and can therefore also be applied on uneven surfaces.

VELFIX has a very high tensile strain. Yet it can be opened easily. VELFIX can be opened and closed up to 10.000 times.

Technical information and packaging HOOK AND LOOP BAND Material: 100% polyamide. Temp, resistance: -30°C to +140°C. Tensile strength: 2.3 N/cm width. Peel off force: 10 N/cm². Thickness: 3 mm (+/- 0.5 mm) (after closing). ACRYLATE ADHESIVE Material: acrylate water based adhesive. Temp, resistance: -15°C to +110°C. Application temp.: +20°C. To be applied: on a clean, degreased, solid and dry surface. Press on very well. Apply at room temperature.

Max. bonding strength: after 72 hours. Resistance: UV: good; aliphatic solvents: good; aromates: good; water (cold): moderate. Removal: dissolves in hot water (90°C). First test foundations based on PE, PP, silicones and bitumen for adhesion (see each tape). Shelf life: 24 months, keep dry, cool and frost-proof.

Applications and use • VELFIX harpoon band is specially developed for a direct adhesion on loopshaped woven carpet. Therefore, damage of the carpet is prevented in case of temporary or permanent fixing and dismounting becomes very easy. • VELFIX back to back is an ideal

bundling system for cables, hoses and other objects. It can always be reopened and reused and is therefore ideal for bundling cable bundles of computers, audio/ video, where, due the minor press-on force, no damage to the conductor is possible.

Product references Article nr

Name

Content

Section

562058000

Velfix loop band black

5m x 25mm

Tapes

562158000

Velfix hook band black

5m x 25mm

Tapes

562258000

Velfix harpoon band black Velfix hook and loop band, fixed back to back

5m x 25mm

Tapes

5m x 25mm

Tapes

562358000

V0.0

www.novatio.com

9.23


9. Tapes

Velfix Bundle and Tie

VBT

General information

• Ultra thin hook and loop. • Easy to use with low peeling force resistance. • High tensile strength with an optimised hook-loop connection. • High material strength due to the special polypropylene. • Also safe to use on most sensitive materials thanks to its soft finish. • For indoor and outdoor use, with good humidity and weather resistance. • Available in two colours: black for neutral bundling and tying, fluorescent yellow for noticeably safer tying • Comes with a handy dispenser with belt clamp and cutting blade.

9.24

VELFIX BT is a very fine polypropylene Velfix for tying and bundling. This special technology allows for a low peeling force resistance, which guarantees user friendliness that directly opposes its high tensile strength. The soft finish respects the most sensitive materials and even plants. Its humidity and weather resistance makes it perfect to use indoors as well as outdoors. VELFIX BT can be open and closed hundreds of times. The greater the overlap, the stronger the connection.

VELFIX BT is available in two colours: black and fluorescent yellow. The black version is used to bundle and tie neutrally, while the fluorescent yellow version makes it all noticeable. The handy VELFIX BT dispenser is small and comes with a belt clamp and a cutting blade.

Technical information and packaging Carrier: polypropylene. Width: 15 mm. Length: 3 m. Average peeling force: new tape: 88,84 g/ cm². After 3000 closings: 67,11 g/cm².

Average tensile strength: new tape: 1,46 kg/ cm². After 3000 closings: 1,31 kg/cm².

Product references Article nr

Name

Content

Section

562815000

Velfix Sup Fine Yellow

15mmx3m

Tapes

562915000

Velfix Sup Fine black

15mmx3m

Tapes

562999000

Velfix Super Fine Dispenser

www.novatio.com

Tapes

V0.0


9. Tapes

Vulcanova Tape

VLT General information

SELF-VULCANIZING TAPE, INDISPENSABLE IN EACH WORKSHOP • Seals, insulates and protects against moisture and corrosion. • Ideal for hard to reach places. • High electrical isolation. • By stretching and overlapping, the tape forms a homogeneous mass. • Ideal product for effective repairs on pipes, tubes and cables. • Easy - time-saving - reliable.

A conformable, self-amalgamating tape based on polyisobutylene, colour black. VULCANOVA TAPE can also be used for protection against corrosion on metal pipework. Insulation against electrical loss show a high degree of stability under conditions of use.

The tape is also highly resistant to prolonged immersion in water and has excellent resistance to ozone.

Technical information and packaging Material: polyisobutylene strengthened by polyethylene. Thickness: 0.5 mm. Tensile strength: 2.0 MN/m². Elongation at break: 600%. Temperature range: -40°C up to +90°C. Water absorption: 0.4%. Electrolytic corrosion liability: none. Flammability: flammable. Resistance against ozone: excellent. Chemically resistant to: water vapour, corrosive vapours, thinned acids. Chemically not resistant to: oil, petrol, grease, solvents. Waterproof: yes.

Weatherproof: yes. Dieletric strength: 40 KV/mm. Volume resistivity: 1015 Ohm Dielectric constant: 2.5 (50 Hz). Power factor: 0.0014 (50 Hz). Adhesion: self-amalgamating. VULCANOVA TAPE is halogen free. First test foundations based on PE, PP, silicones and bitumen for adhesion (see each tape). Shelf life: 24 months, keep dry, cool and frost-proof. Safety measures: consult the Safety Data Sheet.

Applications and use • insulation and protection of electrical connections and cables • repairing and protecting of cable bundling • corrosion protection of metal pipes • temporary repairs of water hoses • insulation of electrical connectors

• to improve all water resistance on electrical applications • for joining (splicing) and repair of a wide range of power and distribution cables up to 46 KV

Product references

V0.1

Article nr

Name

Content

Section

565190000

Vulcanova Tape

roll 10m x 19mm

Tapes

565380000

Vulcanova Tape

roll 10m x 38mm

Tapes

www.novatio.com

9.25


Teipit binder9