Page 1

Accurate and Fast Brake Performance Testing for Heavy Vehicles


AUTOSTOP Heavy Is a portable, battery-powered, invehicle brake performance tester that measures average and maximum deceleration, stopping distance, test speed and pedal-force required to stop a heavy vehicle.

AUTOSTOP Heavy Evaluates brake performance in a quick and reliable manner, and prints an accurate test report that complies with International Standards.

AUTOSTOP Heavy Is an efficient diagnostic and compliance tool, designed to test service and emergency brakes of heavy and slow-moving vehicles used in the transport and mining industries, off-road vehicles, and even forklifts.

AUTOSTOP Heavy has an optional data logging facility, which allows downloading to a PC through an RS-232c interface. If you would like information on another product, please select from the range below:

SAE Mitra Sejati Co, Address Jl. Kayumanis-AMD28, No. 96 JakartaTimur 13530 Phn: +6221-94309943, 8088467 | Fax: +6221-80884679 Website: Email:

Accurate and Fast Brake Performance Testing for Heavy Vehicles

STEP 1: Secure Heavy in the vehicle with its trap or optional Floor-mounted magnet, in a horizontal position, with the lid open and facing forward. Attach the load cell to the brake pedal to test the services brakes.



STEP 2 : Turn on heavy and enter the examiner's ID and the vehicle's registration number. Start the test by accelerating the vehicle to the required speeds. STEP 3 : Apply the brakes by pressing the floot on the load cell attached to the brake pedal, until the vehicle is stationary.


Features • Calculates and Displays average and maximum deceleration, distance to stop test speed and pedal-force required to stop the vehicle • Prints two original reports (one for the customer, the other for the examinear) as a permanent record of the test result dat, time, examinear's ID number and the vehicle's reg/VIN number • Price competitive Light weight (0.3 Kg), compact (123x267x246mm) and portable • Robust contraction that is water-resistant and petrol, chemical and acid-proof • Conventional (QWERTY) keypad lay-out, with a tactile membrane cover • LCD Display • Adjustable display control • Both metric nd imperial units of measurement • Built-in integrity check • Rechargeable, sealed, acid-gel battery with low battery level indicator and automatic shut down • Calibration that is internationally traceable through NATA

• Interval of calibration asa determined by the relevant local authority • 12 months warranty • Low-cost spare parts, accessories and consumables • Comprehensive after-sales service and assistance • Internet support hotline for diagnosis and calibration Optional Features • Numerous user-Entry hardware and software options • Optional ecternal accelerometer for isolated drivers cabin • Optional output to ISO 3412

• •

• • •

Specifications Input Load cell: rated to less than +/- 20N 0 - 1000N Acceleratormeter: rated to less than +/-1% over 0 - 1.5g Output Display: 8 caracter LCD Bult-In printer (Dot Matrix) EIA RS-232C Interface

Products Pty Ltd SAE Mitra Sejati Co, Address Jl. Kayumanis-AMD28, No. 96 Phn: +6221-94309943, 8088467 | Fax: +6221-80884679 Website: Email:

Analysis of The Results • Average and mximum deceleration • Test speed • Stopping distance • Time to Stop • Foot pedal force Power Source • 12V. 1,9AH selaed-lead acid rechargeable battery Printer • Paper: maximum Diameter 48mm;44.5mm (+/-0.5mm) • Ribbon; Epson Type ERC-05 • Ribbon; life equivalent to 3 papper rolls • Print speed; 1.0 line/sec Standar Accesoriess • Bttery charger • Paper roll • Printer ribbon • Papper roll spindle • Printer cover plate assembly • Straps or optional floormounted magnet for case restraint • User manual

Outer appreance and specification are subject to change without prior notice


STEP 4 : After the vehicle has come to stop, Heavy evaluates the brake performance, and display nd print the results.

Autostop heavy  
Autostop heavy