Page 1


About MatTek Corporation

MatTek Corporation was founded in 1985 by two chemical engineering professors from MIT. In 1991 the company leveraged its core polymer surface modification technology into the emerging tissue engineering market. MatTek Corporation is at the forefront of tissue engineering and is a world leader in the production of innovative 3D reconstructed human tissue models. Our skin, ocular, and respiratory tissue models are used in regulatory toxicology (OECD, EU guidelines) and address toxicology and efficacy concerns throughout the cosmetics, chemical, pharmaceutical and household product industries. EpiDerm™, MatTek’s first 3D human cell based in vitro model, was introduced in 1993 and became an immediate technical and commercial success. MatTek revolutionized the market for human cell-based in vitro models by:

MatTek dramatically reduced product cost and increased lab efficiency by consistently delivering high quality, reproducible, products. In turn, this has led to rapid acceptance and utilization of MatTek’s in vitro products by a wide array of major international corporations. The outstanding reproducibility of EpiDerm and EpiOcular, MatTek’s corneal tissue model, led directly to impressive results in international multi-laboratory pre-validation and validation studies. Commercial companies are now empowered to achieve the desirable humane and sociopolitical goals of reducing the number animals used in research while simultaneously controlling costs and generating more relevant, species specific, reproducible data. In 2012 MatTek expanded its global operations by opening MatTek In Vitro Life Science Laboratories a new, state of the

•  Reducing the cost of such models by 50- 80% •  Optimizing researchers’ results by introducing published QC standards (concurrent positive and negative controls), assuring a level of reproducibility acceptable to industry and regulators. •  Increasing industry and regulator confidence in the performance of commercially available in vitro tissue models. The creative use of non-animal (in vitro) testing was fueled by the powerful synergistic effect of lower (direct / indirect) costs and significantly improved product quality.

2 | MatTek Corporation Catalog

art manufacturing and research facility in Bratislava, Slovakia.

MatTek’s human cell-derived tissue models are used throughout the United States and Canada, Europe, Japan, and Eastern Asia. Our record of scientific and technological innovation remains strong as we continue to develop and validate new in vitro assays and human tissue models. We invite you to use our products, services and technical solutions, which will afford your company new opportunities in obtaining faster, cost-effective, more reliable and relevant results compared to the traditional assays and 2D in vitro systems.


Table of Contents 02

About MatTek

04

Glass Bottom Dishes

07

35 mm Glass Bottom Dishes

09

Dish Properties

10

Glass Bottom Plates

18

Chambered Cell Culture Slides

20

Coverslides and Coverslide Kits

24

Product Measurement Guide

30

Cultureware FAQ’s

31

Product Catalog Index

MatTek Corporation Catalog | 3 © 2019 MatTek Corporation


MatTek Dishes MatTek glass bottom dishes combine the convenience of standard size 35 mm and 50 mm disposable plastic petri dishes with the optical quality of glass, providing superior microscopic images. For most applications, No. 1.5 is the preferred coverslip thickness, especially for optimizing image quality with high numerical aperture objectives. A type 1 rat tail collagen coating assists cell adherence to the glass.

All MatTek dishes are sterilized with gamma-irradiation.

4 | MatTek Corporation Catalog


MatTek Corporation Catalog | 5 © 2019 MatTek Corporation


MatTek Dishes

6 | MatTek Corporation Catalog


35 mm MatTek Dishes Part No.

Description

$ | Sleeve Qty

$ | Case Qty

No. 0 Coverslip, 10 mm Glass Diameter No. 0 Poly-D-Lysine Coverslip, 10 mm Glass Diameter No. 0 Collagen Coated Coverslip, 10 mm Glass Diameter

$46 | 10 $56 | 10 $56 | 10

$371 | 200 $453 | 200 $453 | 200

No. 0 Coverslip, 14 mm Glass Diameter No. 0 Poly-D-Lysine Coverslip, 14 mm Glass Diameter No. 0 Collagen Coated Coverslip, 14 mm Glass Diameter

$46 | 10 $56 | 10 $56 | 10

$371 | 200 $453 | 200 $453 | 200

No. 0 Coverslip, 7 mm Glass Diameter

$52 | 10

$486 | 200

$56 | 5

$321 | 75

No. 1.0 Coverslip, 14 mm Glass Diameter No. 1.0 Poly-D-Lysine Coverslip, 14 mm Glass Diameter No. 1.0 Collagen Coated Coverslip, 14 mm Glass Diameter

$46 | 10 $56 | 10 $56 | 10

$381 | 200 $453 | 200 $453 | 200

No. 1.0 Coverslip, 20 mm Glass Diameter

$56 | 10

$498 | 200

No. 1.5 Coverslip, 10 mm Glass Diameter No. 1.5 Poly-D-Lysine Coverslip, 10 mm Glass Diameter No. 1.5 Collagen Coated Coverslip, 10 mm Glass Diameter

$46 | 10 $56 | 10 $56 | 10

$349 | 200 $432 | 200 $432 | 200

No. 1.5 Coverslip, 14 mm Glass Diameter No. 1.5 Poly-D-Lysine Coverslip, 14 mm Glass Diameter No. 1.5 Collagen Coated Coverslip, 14 mm Glass Diameter

$46 | 10 $56 | 10 $56 | 10

$349 | 200 $432 | 200 $432 | 200

No. 1.5 Coverslip, 20 mm Glass Diameter

$56 | 10

$464 | 200

$52 | 10

$464 | 200

35 mm Dish | No. 0 Coverslip 10 mm Glass Diameter P35G-0-10-C P35GC-0-10-C P35GCOL-0-10-C

14 mm Glass Diameter P35G-0-14-C P35GC-0-14-C P35GCOL-0-14-C

7 mm Glass Diameter P35G-0-7-C

35 mm Dish | No. 1.5 (High Tolerance) Coverslip 14 mm Glass Diameter P35G-0-.170-14-C

No. 1.5 (High Tolerance) Coverslip, 14 mm Glass Diameter

35 mm Dish | No. 1.0 Coverslip 14 mm Glass Diameter P35G-0-1.0-14-C P35GC-0-1.0-14-C P35GCOL-0-1.0-14-C

20 mm Glass Diameter P35G-0-1.0-20-C

35 mm Dish | No. 1.5 Coverslip 10 mm Glass Diameter

14 mm Glass Diameter P35G-1.5-14-C P35GC-1.5-14-C P35GCOL-1.5-14-C

20 mm Glass Diameter P35G-1.5-20-C

7 mm Glass Diameter P35G-1.5-7-C

No. 1.5 Coverslip, 7 mm Glass Diameter

Cultureware | MatTek Dishes

P35G-1.5-10-C P35GC-1.5-10-C P35GCOL-1.5-10-C


50 mm MatTek Dishes Low sidewalls make 50 mm dishes ideal for microinjection. 50 mm dish covers snap securely to the bottom, perfect for atmosphere maintenance.

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

No. 0 Coverslip, 14 mm Glass Diameter

$45 | 10

$399 | 200

No. 0 Coverslip, 30 mm Glass Diameter

$63 | 10

$526| 200

No. 1.5 Coverslip, 14 mm Glass Diameter No. 1.5 Coverslip, 14 mm Glass Diameter, Poly-D-Lysine Coated

$45 | 10 $56 | 10

$376 | 200 $459 | 200

No. 1.5 Coverslip, 30 mm Glass Diameter

$63 | 10

$526 | 200

$56 | 5

$526 | 75

50 mm Dish | No. 0 Coverslip 14 mm Glass Diameter P50G-0-14-F

30 mm Glass Diameter P50G-0-30-F

50 mm Dish | No. 1.5 Coverslip

Cultureware | MatTek Dishes

14 mm Glass Diameter P50G-1.5-14-F P50GC-1.5-14-F

30 mm Glass Diameter P50G-1.5-30-F

35 mm Dish | No. 1.5 Gridded Coverslip 14 mm Glass Diameter P50G-1.5-30-FGRD

No. 1.5 Coverslip, 30 mm Glass Diameter


MatTek Glass Bottom Dishes FAQ’s How are glass bottom dishes typically used? MatTek’s glass bottom dishes are available uncoated or coated with poly-d-lysine or collagen. All dishes are gamma irradiated to insure sterility. A general procedure for their use follows. •

Maintain sterility: Open dishes in a sterile environment (e.g. laminar flow hood).

Pre-equilibrate dishes: Incubate the dishes with culture medium. Pipet 2-3 ml of medium into the 35 mm dishes or 3-4 ml into the 50 mm dishes and incubate at 37° C for 15 minutes.

Add cell suspension to microwell: Remove the culture medium by aspiration and plate cells onto the glass surface. Pipet 250 µl of the cell suspension (cells suspended in culture medium) into the 10 mm diameter microwells, 500 µl of cell suspension into the 14-mm microwells, or 1 ml of cell suspension into the 20-mm wells. Incubate the dishes for 1 hour at 37° C.

Add additional medium: After 1 hour, gently fill the remainder of the dish with medium. Add 2-3 ml to the 35 mm dishes or 3-4 ml for the 50 mm dishes.

What type of glass bottom dish should I use to grow my cells? It is hard to predict which type of glass bottom dishes (uncoated, poly-d-lysine coated, or collagen coated) will work best with your specific cell type. Many transformed or cancerous cell lines will grow on uncoated dishes. Poly-lysine coated dishes work well for neuronal culture and for many primary cells; other cells prefer a collagen coating. Also, many researchers purchase our uncoated dishes and apply their own specialized coating. You can also Google search for published methods utilizing glass bottom dishes and your cells.

Can the coverslip be removed from the glass bottom dishes? Yes, but for most applications, cells growing in the glass bottom dish can be viewed without removal of the coverslip using a variety of inverted and upright microscopes.

Can the glass bottom dishes be re-used? We do

NOT recommend re-using the glass bottom

dishes. The surface properties of the substrate on which cells are cultured have a profound effect on cell structure and function. Re-use of dishes will introduce uncontrolled variables into your experiments which may affect the phenomenon under study. MatTek glass bottom dishes are meant for single-use experiments.

MatTek Corporation Catalog | 9 © 2019 MatTek Corporation


Glass Bottom Plates MatTek dishes have been the industry standard for cell culture and spectacular high resolution imaging for nearly 30 years quality with high numerical aperture objectives. MatTek’s multiwell plates combine the highest quality glass with the ability to grow up to 96 cultures under identical conditions.

All MatTek dishes are sterilized with gamma-irradiation.

10 | MatTek Corporation Catalog


6-well Glass Bottom Plates Available in 10 mm, 14 mm, or 20 mm glass diameters, these 6-well plates offer the largest culture surface of any of our multiwell plates.

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

$36

$220 | 10

$36

$220 | 10

$36

$220 | 10

$36

$230 | 10

$36

$230 | 10

$36

$230 | 10

$36

$208 | 10

$36

$208 | 10

$36

$208 | 10

6-well Plate | No. 0 Coverslip 10 mm Glass Diameter P06G-0-10-F

No. 0 Coverslip, 10 mm Glass Diameter

14 mm Glass Diameter P06G-0-14-F

No. 0 Coverslip, 14 mm Glass Diameter

20 mm Glass Diameter P06G-0-20-F

No. 0 Coverslip, 20 mm Glass Diameter

6-well Plate | No. 1 Coverslip 10 mm Glass Diameter P06G-1.0-10-F

No. 1.0 Coverslip, 10 mm Glass Diameter

14 mm Glass Diameter

Cultureware | Glass Bottom Plates

P06G-1.0-14-F

No. 1.0 Coverslip, 14 mm Glass Diameter

20 mm Glass Diameter

P06G-1.0-20-F

No. 1.0 Coverslip, 20 mm Glass Diameter

6-well Plate | No. 1.5 Coverslip 10 mm Glass Diameter P06G-1.5-10-F

No. 1.5 Coverslip, 10 mm Glass Diameter

14 mm Glass Diameter P06G-1.5-14-F

No. 1.5 Coverslip, 14 mm Glass Diameter

20 mm Glass Diameter P06G-1.5-20-F

No. 1.5 Coverslip, 20 mm Glass Diameter


MatTek Plates MatTek’s signature high-quality glass in multiple options from 6 to 384 wells to suit your culture needs.

MatTek Corporation Catalog | 13 Š 2019 MatTek Corporation


12-well Glass Bottom Plates Available in 10 mm, 14 mm, or 20 mm glass diameters, these 12-well plates offer the largest culture surface of any of our multiwell plates.

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

No. 0 Coverslip, 10 mm Glass Diameter

$49

$299 | 10

No. 0 Coverslip, 14 mm Glass Diameter

$49

$299 | 10

No. 1.0 Coverslip, 10 mm Glass Diameter

$49

$310 | 10

No. 1.0 Coverslip, 14 mm Glass Diameter

$49

$310 | 10

No. 1.5 Coverslip, 10 mm Glass Diameter

$49

$289 | 10

No. 1.5 Coverslip, 14 mm Glass Diameter

$49

$289 | 10

12-well Plate | No. 0 Coverslip 10 mm Glass Diameter P12G-0-10-F

14 mm Glass Diameter P12G-0-14-F

12-well Plate | No. 1 Coverslip 10 mm Glass Diameter P12G-1.0-10-F

14 mm Glass Diameter

Cultureware | Glass Bottom Plates

P12G-1.0-14-F

12-well Plate | No. 1.5 Coverslip 10 mm Glass Diameter P12G-1.5-10-F

14 mm Glass Diameter P12G-1.5-14-F


RENAME ME - Single Spicimen Plate With a viewing area of 98mm X 67mm, MatTek’s newest cultureware product has been created to provide the greatest possible culture surface in a standard size plate. The generous viewing area of this plate makes it ideal for whole-animal or whole-organ imaging.

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

384-well Plate | No. 1.5 Coverslip Uncoated P384G-1.5-10872-C

No. 1.5 Coverslip, 98mm X 67mm Viewing Area

$63

$257 | 10

PBK384G-1.5-C

No. 1.5 Coverslip, 98mm X 67mm Viewing Area, Black Plate

$68

$273 | 10

384-well Black Glass Bottom Plates MatTek 384-well glass bottom plates are ideal for highquality, high-throughput performance applications where low autofluorescence and exceptional optical clarity are needed. Ideal for high-resolution imaging, sensitive fluorescence, and confocal microscopy such as single molecule detection (SMD). Transmission measurements are capable in the wavelength range above 340nm.

MatTek Corporation Catalog | 15 Š 2019 MatTek Corporation


24-well Glass Bottom Plates Part No.

Description

$ | Sleeve Qty

$ | Case Qty

No. 0 Coverslip, 10 mm Glass Diameter

$55

$358 | 10

No. 0 Coverslip, 13 mm Glass Diameter

$55

$358 | 10

No. 1.0 Coverslip, 10 mm Glass Diameter

$55

$365 | 10

No. 1.0 Coverslip, 13 mm Glass Diameter

$55

$369 | 10

No. 1.5 Coverslip, 13 mm Glass Diameter

$55

$230 | 10

No. 1.5 Coverslip, 13 mm Glass Diameter

$55

$230 | 10

$63

$422

$ | Sleeve Qty

$ | Case Qty

$60

$374 | 10

24-well Plate | No. 0 Coverslip 10 mm Glass Diameter P24G-0-10-F

13 mm Glass Diameter P24G-0-13-F

24-well Plate | No. 1.0 Coverslip 10 mm Glass Diameter P24G-1.0-10-F

13 mm Glass Diameter P24G-1.0-13-F

24-well Plate | No. 1.5 Coverslip 10 mm Glass Diameter P24G-1.5-10-F

13 mm Glass Diameter P24G-1.5-13-F

24-well Plate | No. 1.5 Coverslip

Cultureware | Glass Bottom Plates

Multi-well Plate Cover P24GTOP-1.5-F

No. 1.5 Coverslip

48-well Glass Bottom Plates Part No.

Description

48-well Plate | No. 0 Coverslip 10 mm Glass Diameter P48G-1.5-6-F

No. 0 Coverslip, 10 mm Glass Diameter


96-well Glass Bottom Plates MatTek’s signature high-quality cover glass, combined with the high throughput convenience of a standard 96well plate for brilliant imaging.

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

$36

$208 | 10

$58 $86 $63

$198 | 10

96-well Plate | No. 0 Coverslip 5 mm Glass Diameter P96G-0-5-F

No. 0 Coverslip, 5 mm Glass Diameter

96-well Plate | No. 1.5 Coverslip 5 mm Glass Diameter P96G-1.5-5-F P96GC-1.5-5-F PBK96G-1.5-5-F

No. 1.5 Coverslip, 5 mm Glass Diameter No. 1.5 Coverslip, 5 mm Glass Diameter, Poly-D-Lysine Coated No. 1.5 Coverslip, 5 mm Glass Diameter, Black Plate

$278 | 10 $241 | 10

NanoSurface Topography NanoSurface Plate | No. 1.5 Coverslip PBK96G-1.5-7-NS

No. 1.5 Coverslip, 6.5 mm Glass Diameter

$225

Featured Product! Black 96-well Plates Minimized backscattered light / background fluorescence Glass bottom provides superior high-resolution imaging Eliminates well-to-well crosstalk

MatTek Corporation Catalog | 17 Š 2019 MatTek Corporation


Coverslips and Coverslip Kits The highest quality German coverslips for use with MatTek’s Chambered Cell Culture Slides. Culture up to 8 different conditions on our new Chambered Slides, fix or stain your samples, and finish with these coverslips for immaculate slides, and brilliant images.

All MatTek dishes are sterilized with gamma-irradiation.

18 | MatTek Corporation Catalog


Coverslips Description Here

Part No.

Description

$ | Sleeve Qty

Specific Sizes PCS-1.5-5024 PCS-0-10872 PCS-1.5-10872

50 mm x 24 mm Coverslip, No. 1.5 Glass Thickness 108 mm x 72 mm Coverslip, No. 0 Glass Thickness 108 mm x 72 mm Coverslip, No. 1.5 Glass Thickness

$96 | 100 $142 | 10 $142 | 10

15 mm Coverslip, No. 0 Glass Thickness 15 mm Coverslip, No. 1 Glass Thickness 15 mm Coverslip, No. 1.5 Glass Thickness

$110 | 100 $110 | 100 $99 | 100

17 mm Coverslip, No. 0 Glass Thickness 17 mm Coverslip, No. 1.0 Glass Thickness 17 mm Coverslip, No. 1.5 Glass Thickness

$110 | 100 $110 | 100 $99 | 100

18 mm Coverslip, No. 0 Glass Thickness 18 mm Coverslip, No. 1 Glass Thickness 18 mm Coverslip, No. 1.5 Glass Thickness

$110 | 100 $110 | 100 $99 | 100

15 mm Coverslips PCS-0-15 PCS-1.0-15 PCS-1.5-15

17 mm Coverslips PCS-0-17 PCS-1.0-17 PCS-1.5-17

18 mm Coverslips PCS-0-18 PCS-1.0-18 PCS-1.5-18

18 x 18 mm Coverslips PCS-0-1818 PCS-1.0-1818 PCS-1.5-1818 PCS-170-1818 PCS-1818-GRD

18 x 18 mm Coverslip, No. 0 Glass Thickness 18 x 18 mm Coverslip, No. 1 Glass Thickness 18 x 18 mm Coverslip, No. 1.5 Glass Thickness 18 x 18 mm Coverslip, No. 1.5 (High Tolerance) Glass Thickness 18 x 18 mm Coverslip, No. 2 Glass Thickness

$89 | 100 $89 | 100 $76 | 100 $110 | 100 $150 | 100

Cultureware | Coverslips

22 x 22 mm Coverslips PCS-1.5-2222

22 x 22 mm Coverslip, No. 1.5 Glass Thickness

$76 | 100

25 mm Coverslip, No. 0 Glass Thickness 25 mm Coverslip, No. 1.0 Glass Thickness 25 mm Coverslip, No. 1.5 Glass Thickness

$144 | 100 $144 | 100 $133 | 100

35 mm Coverslip, No. 0 Glass Thickness 35 mm Coverslip, no. 1.5 Glass Thickness

$165 | 100 $154 | 100

25 mm Coverslips PCS-0-25 PCS-1.0-25 PCS-1.5-25

35 mm Coverslips PCS-0-35 PCS-1.5-35


18 x 18 mm Coverslip, No. 1 Glass Thickness $100

Coverslip Kits Description Here

Part No.

Description

$ | Sleeve Qty

$ | Case Qty

No. 1.5 Coverslip 35 mm Glass Diameter CSGK/C

No. 1.5 Coverslip (22 x 22 mm), 35 mm Corning Dish

$43 | 20

$337 | 500

CSGK/C-HT

No. 1.5 (High Tolerance) Coverslip (22 x 22 mm), 35 mm Corning Dish

$50 | 10

$359 | 200

CSGK/F

No. 1.5 Coverslip (22 x 22 mm), 35 mm Flacon Dish

$43 | 20

$337 | 500

CSGK/F-F

Same as CSGK/F contains foam protection

$45 | 20

$371 | 500

CSGK/N

No. 1.5 Coverslip (22 x 22 mm), 35 mm Nunc Dish

$43 | 20

$349 | 500

MatTek Corporation Catalog | 21 © 2019 MatTek Corporation


Chambered Cell Culture Slides MatTek’s newest cultureware product, these chambered slides offer the unique benefit of culturing up to 8 different conditions on one standard glass slide. The easy “snap-on, snap-off” chamber apparatus uses no adhesive, and does not require a special tool for removal. WWW • Convenient for microscopic observation • Easy open flip for chamber & slide disassembly • No chemical adhesives used • Prevents cross-contamination • Alphanumeric labeling • 2-well, 4-well, and 8-well formats available.

All MatTek dishes are sterilized with gamma-irradiation.

22 | MatTek Corporation Catalog


Part No.

Description

$ | Sleeve Qty

2-well Chambered Cell Culture Slide CCS-2

2-well CCS

$107 | 12

4-well Chambered Cell Culture Slide CCS-4

4-well CCS

$107 | 12

8-well Chambered Cell Culture Slide CCS-8

8-well CCS

$107 | 12

Cultureware | CCS


Product Measurement Guide

24 | MatTek Corporation Catalog


35 mm Glass Bottom Dishes

50 mm Glass Bottom Dishes

Cultureware | NSERT PAGES


6-well Plate

12-well Plate

26 | MatTek Corporation Catalog


24-well Plate

48-well Plate

Cultureware | NSERT PAGES


96-well Plate

Chambered Cell Culture Slide

28 | MatTek Corporation Catalog


Special Orders

Other than the standard 10mm, 14mm, and 20mm glass diameter surfaces, do the glass bottom dishes come with any alternatives? Glass bottom dishes with 7-mm diameter glass surfaces are standard products (e.g. part # P35G1.5-7-C or P35G-0-7-C). In addition, 50-mm, 60-mm- and 100-mm dishes come with a 30-mm diameter glass surface (e.g. part #P50G-1.5-30-F, P60G-1.50-30-F, P100G-1.5-30-F) and are standard products; these dishes maximize the surface area for cell growth. When very expensive reagents need to be conserved, dishes with a 5-mm diameter glass surface (e.g. part #: P35G-1.55-C) are also available on a special order basis. Lead-time: Special order items typically can be produced within 2-3 weeks of receipt of a purchase order. However, bulk sterilization of the glass bottom dishes occurs only once every 6 weeks. Therefore, the lead-time for sterilized, special order products can vary between 3-8 weeks. Note: Lead-times can be shortened if the customer will sterilize the dishes using UV and/or 70% ethanol (e.g. 40 mins under UV light in a tissue culture hood and/or immersion if 70% ethanol for 30 minutes). Special order charges: Special order charges: For special orders of 3 cases or more, there is no special order charge; however, for special orders of less than 3 cases, a special order charge will apply. Return policy: Special orders items cannot be returned.

MatTek Corporation Catalog | 29 Š 2019 MatTek Corporation


Cultureware FAQ’s How do I know that the glass bottom multi-well plates are sterile? All glass bottom multi-well plates are gamma irradiated at an FDA approved and certified vendor. We sterilize our dishes in bulk – typically >5000 separate cases are sterilized at the same time. Since sterility is an absolute requirement for all of our customers, the gamma dose that we use is excessive in order to ensure sterility. Following sterilization, dishes are subject to our quality control analysis to verify sterility: they are incubated in antibiotic- and anti-fungal-free medium for 7 days. In addition, each box has a gamma irradiation indicator which turns red upon exposure to gamma rays.

Where do you manufacture and ship your dishes? All of our dishes are manufactured and shipped worldwide from our location in Ashalnd, MA, USA.

What are MatTek’s major product lines? MatTek produces a variety of normal (non-transformed), human cell-derived, 3-dimensional, organotypic in vitro tissue equivalents. Our site, MatTek.com, is devoted to providing detailed information about our in vitro human tissue equivalents. They are mitotically and metabolically active, closely mimic their in vivo counterparts, both structurally and biochemically, and do so with guaranteed reproducibility.

How are the in vitro human tissue equivalents shipped? Tissues are typically shipped at 4°C on medium-supplemented agarose gel. Shipment day: Every Monday. Shipment Delivery: Tuesday morning via FedEx priority service (US). Outside US: Tuesday-Thursday depending on location.

30 | MatTek Corporation Catalog


Catalog Number Index

P35G-0-10-C. . . . . . . . . . . P35G-0-14-C. . . . . . . . . . . P35G-0-20-C. . . . . . . . . . . P35G-0-7-C. . . . . . . . . . . . P35G-1.0-14-C . . . . . . . . . P35G-1.0-20-C . . . . . . . . . P35G-1.5-10-C . . . . . . . . . P35G-1.5-14-C . . . . . . . . . P35G-1.5-20-C . . . . . . . . . P35G-1.5-7-C . . . . . . . . . . P35G-0.170-14-C . . . . . . . P35GC-0-10-C. . . . . . . . . P35GC-0-14-C. . . . . . . . . P35GC-1.0-14-C. . . . . . . . P35GC-1.5-10-C. . . . . . . . P35GC-1.5-14-C. . . . . . . . P35GCOL-0-10-C. . . . . . . P35GCOL-0-14-C. . . . . . . P35GCOL-1.0-14-C. . . . . . P35GCOL-1.5-10-C. . . . . . P35GCOL-1.5-14-C. . . . . . P50G-0-14-F. . . . . . . . . . . P50G-30-F. . . . . . . . . . . . . P50G-1.5-14-F. . . . . . . . . P50G-1.5-30-F. . . . . . . . . P50GC-0-14-F. . . . . . . . . . P50GC-1.5-14-F . . . . . . . . P06G-0-10-F. . . . . . . . . . . P06G-0-14-F. . . . . . . . . . .

Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 7 Pg. 8 Pg. 8 Pg. 8 Pg. 8 Pg. 8 Pg. 8 Pg. 13 Pg. 13

P06G-0-20-F. . . . . . . . . . . P06G-1.0-10-F. . . . . . . . . P06G-1.0-14-F. . . . . . . . . P06G-1.0-20-F. . . . . . . . . P06G-1.5-10-F. . . . . . . . . P06G-1.5-14-F. . . . . . . . . P06G-1.5-20-F. . . . . . . . . P12G-0-10-F. . . . . . . . . . . P12G-0-14-F. . . . . . . . . . . P12G-1.0-10-F. . . . . . . . . P12G-1.0-14-F. . . . . . . . . P12G-1.5-10-F. . . . . . . . . P12G-1.5-14-F. . . . . . . . . P24G-0-10-F. . . . . . . . . . . P24G-0-13-F. . . . . . . . . . . P24G-1.0-10-F. . . . . . . . . P24G-1.0-13-F. . . . . . . . . P24G-1.5-10-F. . . . . . . . . P24G-1.5-13-F. . . . . . . . . P48G-1.5-6-F. . . . . . . . . . P96G-0-5-F. . . . . . . . . . . . P96G-1.5-5-F. . . . . . . . . . P96GC-0-5-F. . . . . . . . . . . P96GC-1.5-5-F . . . . . . . . . PBK96G-1.5-5-F. . . . . . . . CCS-2. . . . . . . . . . . . . . . . CCS-4. . . . . . . . . . . . . . . . CCS-8. . . . . . . . . . . . . . . . CSGK/C. . . . . . . . . . . . . . .

Pg. 13 Pg. 13 Pg. 13 Pg. 13 Pg. 13 Pg. 13 Pg. 13 Pg. 14 Pg. 14 Pg. 14 Pg. 14 Pg. 14 Pg. 14 Pg. 16 Pg. 16 Pg. 16 Pg. 16 Pg. 16 Pg.16 Pg. 16 Pg. 17 Pg. 17 Pg. 17 Pg. 17 Pg. 17 Pg. 19 Pg. 19 Pg. 19 Pg. 22

CSGK/C-HT. . . . . . . . . . . . CSGK/F. . . . . . . . . . . . . . . CSGK/F-F. . . . . . . . . . . . . CSGK/N. . . . . . . . . . . . . . . PCS-1.5-5024. . . . . . . . . . PCS-0-10872. . . . . . . . . . . PCS-1.5-10872. . . . . . . . . PCS-0-15. . . . . . . . . . . . . . PCS-1.0-15. . . . . . . . . . . . PCS-1.5-15. . . . . . . . . . . . PCS-0-17. . . . . . . . . . . . . . PCS-1.0-17. . . . . . . . . . . . PCS-1.5-17. . . . . . . . . . . . PCS-0-18. . . . . . . . . . . . . . PCS-1.0-18. . . . . . . . . . . . PCS-1.5-18. . . . . . . . . . . . PCS-0-1818. . . . . . . . . . . . PCS-1.0-1818. . . . . . . . . . PCS-1.5-1818. . . . . . . . . . PCS-170-1818. . . . . . . . . . PCS-1818-GRD. . . . . . . . . PCS-1.5-2222. . . . . . . . . . PCS-0-25. . . . . . . . . . . . . . PCS-1.0-25. . . . . . . . . . . . PCS-1.5-25. . . . . . . . . . . . PCS-0-35. . . . . . . . . . . . . . PCS-1.5-35. . . . . . . . . . . .

Pg. 22 Pg. 22 Pg. 22 Pg. 22 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23 Pg. 23

MatTek Corporation Catalog | 31 © 2019 MatTek Corporation


32 | MatTek Corporation Catalog

Profile for Ryan Alexa Pitt

MatTek DRAFT ONE  

MatTek DRAFT ONE  

Advertisement