ETL & DLC Listed Dimmable LED Thin Panel Lights Ideally Designed for Down Lighting
1888PressRelease Energyefficient, vibrationresistant LED replacements for both fluorescent fixtures and tube lights with its ETL and DLC listed dimmable thinpanel lights. LEDtronics® announces energyefficient, vibrationresistant LED replacements for both fluorescent fixtures and tube lights with its ETL and DLC listed dimmable thinpanel lights that are designed to replace troffers in most standard recessed Tbar ceilings. Available in three sizes, the CLL series of thinpanel LED lights are ideal for flatpanel down lighting in offices, hospitals, hotels, resorts, conference rooms, commercial areas, as well as in educational institutions. Model number CLL1X440WXWW101D is 1x4 ft and consumes only 45 watts of power, CLL2X240WXWW101D is 2x2 ft and consumes 44 watts, while CLL2X460WXWW101D is 2x4 ft, with only a 67watt power use. Power consumption further decreases in linear proportion to the dimming level. Additionally, the minimal lamp heat output of LEDs over that produced by fluorescent tubes keeps temperatures in offices and hallways optimally lower, saving building airconditioning costs . The CLL LED Panel Lights come in frosted lens, putting out 4100Kelvin natural white light. Optional other colors, 3000K and 5000K, are available on request with quantity orders. The panel lights operate at 100277 VAC, delivering a total light output of 4325 lumens (1x4 panel), 4259 lm (2x2 panel) and 6414 lm (2x4 panel) across a wide beam pattern of up to 115 degrees. When it comes to rated life, the LEDtronics series of dimmable LED thin panel lights really shines. While conventional fluorescent lamps typically have an idealcondition rated lab life in the range 8,000 to 24,000 hours, the CLL LED panel lights boast a realworld operating life of 50,000 hours and more5.7 years of continuous light output. The sturdy construction of a UVresistant polycarbonate lens over the LED panels provides increased protection no glass to break and no mercury environmental hazards to worry about as with fluorescent tubes. In addition, the housing shields against many environmental effects, allowing them to be placed in locations where typical tube lights would be more vulnerable to the elements, thus eliminating the additional expense of lightrobbing plastic tube guardsa major problem in the food industry. Also, LEDtronics thin LED panel lights perform well in a wide range of ambient operating temperatures: ~22°F to ~+122°F (~30°C to ~+50°C), making them ideal for applications subject to frequent onoff cycling or very low temperatures. Other benefits of LEDs over fluorescents include: Quick and easy installation to minimize retrofit costs; no ballast nor starter needed, thus mostly eliminating radio frequency that interferes with radio and cell phone signals; instant, fullstrength lightup; no buzzing or flickering; and directional distribution of light. These thin LED panel lights come with an electrical junction box that connects to the back of the light panel for easy electrical connection. Solidstate design renders LEDs impervious to shock, vibration, frequent switching and environmental extremes.
Savings from reduced maintenance costs and downtime quickly return the capital investment expenditure, making them as friendly to the environment as they are to the operating budget. The LEDtronics LED panel lights comply with RoHSthe leadfree and mercuryfree European directive. They emit little infrared or ultraviolet radiation. Unlike conventional fluorescent bulbs, LED lights are not disposed of as hazardous waste at end of life. The LEDtronics series CLL Panel Lights come with a 5year LEDtronics warranty. Availability is stock to 46 weeks for special requirements. For technical information or for custom design and/or manufacturing needs, contact Jordon Papanier at 3105341505 or email us at info ( @ ) ledtronics dot com, or postal mail at LEDtronics, Inc dot , 23105 Kashiwa Court, Torrance, CA 90505 dot http://www.ledtronics.com/ ###
Published on Jun 11, 2014
(1888 PressRelease) Energy-efficient, vibration-resistant LED replacements for both fluorescent fixtures and tube lights with its ETL and DL...