F. Ball Gets Tough On Moisture… F. Ball and Co. Ltd.’s Professional Waterproof Surface Membranes really do ‘Pack a Punch’…
T
he technical Experts at F. Ball know that the way to ensure the lasting performance of a new floorcovering installation is to deal with any damp or moisture problems from the outset. If not dealt with successfully at the start of the project, not only will the appearance of the new floorcovering be ruined, but the very fabric of its construction and ultimately the integrity of the installation will be compromised too. As the UK’s premier flooring product specialist, F. Ball have developed a specialist market leading range of high performance products providing a wide range of moisture control solutions. These products are tried and tested and used by the world’s best flooring contractors. Every flooring contractor knows the old maxim – time is money, so when there are products that can deliver better economy, are easier to apply, and provide time-saving solutions guaranteed to perform perfectly, they’re bound to attract a lot of attention. Moisture is a tough problem requiring an even tougher solution – something that can ‘Hit Moisture Hard’ and deliver a ‘Knock-out blow’ that will prevent moisture winning the fight… Guaranteed! Accurate moisture testing in accordance with the British Codes of Practice BS 8203, BS 5325 and BS 8201 is essential to determine the Relative Humidity (RH) level within a subfloor. Where the RH is above 75%, the installation should not proceed, as excess moisture in the floor could result in blistering of the floorcovering or complete failure of the flooring installation. This may result in expensive and lengthy remedial work, including the possibility of a costly ‘rip out’. Visual inspection is insufficient as a surface can appear dry while excess moisture is still present. F. Ball recommend Moisture Levels be checked by use of their approved Digital Hygrometers, the Protimeter Aquant or
Protimeter Moisture Measurement System (MMS)… all available from F. Ball and approved wholesale outlets. Once levels have been accurately measured and confirmed you then need apply the best Waterproof Surface Membrane available. Introducing F Ball’s ‘Damp Destroyer’, Stopgap F77… a One-Coat (two-part) Epoxy system that can be used over subfloors with an RH measurement of up to 98%! This dynamic combination delivers a ‘Killer Blow’ and guarantees to leave Moisture ‘Down and Out’ in One Round! Available in 3kg, 7kg or 14kg options, this ‘Damp Destroyer’ is worth its weight in gold as it can even be used with underfloor heating (up to 90% RH) and can be regarded as a Winning Combination in almost every situation. F. Ball’s ‘Hydro-Slayer’ Stopgap F78… Weighing in at 6kg, 12kg or 18kg options, is a Two-Coat (one-part) Water Based System that has proven to be a True Winner as an EcoFriendly – Zero Waste Contender that delivers a ‘Decisive Blow’ to moisture where RH levels are present up to 95%! Both Stopgap F77 and F78 deliver ‘Heavyweight Knockout Performances’ given their Handy Pack Sizes… and they certainly don’t ‘Pull any Punches’ and will deliver the Ultimate Blow in the battle against Moisture. Kilo for Kilo there are no better ‘Weapons of Damp Destruction’ to have in your corner. The treatment of Moisture problems is a very serious element of any flooring contactor’s daily life… The secret to a successful outcome is to ‘Fight Smarter’ and ‘Beat Moisture… Black and Blue’ with F. Ball’s specialist Waterproof Surface Membranes!
For further information on the complete F.Ball range of Waterproof Surface Membranes, moisture control and moisture measurement please visit the F.Ball website www.f-ball.co.uk
As the UK’s premier flooring product specialist, F. Ball have developed a specialist market leading range of high performance products providing a wide range of moisture control solutions. These products are tried and tested and used by the world’s best flooring contractors. Performance Statistics
Stopgap F77 The ‘Damp Destroyer’
Stopgap F78 The ‘Hydro-Slayer’
Pack Sizes
3kg, 7kg or 14kg kits
6kg, 12kg or 18kg pack
Colour
Black – to assist with uniform application
Blue – to assist with uniform application
Shelf Life
12 months if unopened and stored under good conditions
12 months if unopened and stored under good conditions
Cure Time
3 hours at 20c ambient
15-30 min at 20c ambient (for first coat – 30 min for 2nd coat)
Application
One coat
Two Coats
Tools required
1.5mm x 5mm or A2 trowel and paint roller
Paint Roller