Page 1

STRUCTURAL RENOVATION steinhauser.bz | 1300209-05 | 06-13


VGZ WOOD-WOOD

VGZ FULLY THREADED SCREW WITH CYLINDRICAL HEAD

Art. code VGZ7xxx / VGZ9xxx

Constructive solution: Through the use of a timber slab placed above the existing beam, a structural reinforcement which mixes lightness and material compatibility is realized. Thanks to this dry-fixing, the system is lightly invasive and totally reversible.

Product Description The self tapping screw VGZ, thanks to the thread running along the full length and through a cross placed installation with “X� configuration, provides an high level of performance as regard resistance and stiffness. In particular, stiffness is the most important feature to be reached in order to guarantee the best efficiency for the reinforcement.

Concealed, strong and stiff connection High resistances with few screws Cylindrical head for a concealed penetration System tested and studied in collaboration with Trento University Ask for your calculation advice to Rothoengineer

CALCULATION SOFTWARE VGZ


VB WOOD-CONCRETE

VB CONNECTOR FOR COMPOSITE WOOD-CONCRETE FLOOR

Art. code

CS100xxx

Constructive solution: Through the use of a concrete slab placed above the existing beam, a structural reinforcement which provides high resistance and stiffness in both direction of the floor is realized. This system provides also high acoustic performance.

Product Description The connectors VB, thanks to the ring stopper and through a cross placed installation with a 45° inclination along the beam in a “X” configuration, provide a very fast and precise assembling without the interruption of the planking. The small diameter and the dry-fixing enhance the system to be lightly invasive and well enough reversible.

Quick dry-fixing by a standard screwdriver Lightly invasive and reversible self-tapping system Limited spill thanks to the ring stopper Installation with a continuing planking Software of calculation online for easy design

CALCULATION SOFTWARE VB


SOUNDPROOFING

Silent floor

Art. code

SOUNDPROOFING AGAINST FOOTSTEP NOISE

DZ400412

Constructive solution: Developed for be installed within acoustic finishing systems; intended especially for restoration works with VB fasteners thanks to its bituminous matrix which seals hermetically the hole of connector.

Product Description Bitumen/syntheticneedle- punched soundproof membrane. Guarantees excellent mechanical characteristics, puncture-proof, protection of underlying floor even during open building site phase.

High mechanical strength double-layer, 6 mm thick High resilience for floating floor insulation T he use of its specific self-adhesive strip is recommended

ADDITIONAL PRODUCT black band

Art. code DZ100150/DZ100200

ADDITIONAL PRODUCT silent edge Perfect water seal due to correct taping Needle-punching on the underside keeps the product in the original installation position

Art. code

DZ45010050


BEAM’S HEAD PROTECTION

BEAM PROTECT PROTECTIVE BREATHABLE SYNTHETIC MEMBRANE

Art. code

DZ564275

Constructive solution: Waterproofing polypropylene membrane which protects timber beam’s head against damp, water damage or water rising from concrete. Additionally, the high breathable value of the membrane enhance the humidity dispersal.

High breathable waterproofing polypropilen membrane (h= 27,5 cm)

T o be used with Flexi Band for a perfect sealing of details

VGZ FLANKED BEAMS

VGZ FULLY THREADED SCREW WITH CYLINDRICAL HEAD Constructive solution: The reinforcement of timber beams can be realized through the fixation of another timber beam placed laterally on the side and conveniently jointed. Thanks to the dry-fixing, this system is lightly invasive and totally reversible.

High resistances with few screws Cylindrical head for a concealed penetration

Art. code VGZ7xxx / VGZ9xxx


XEPOX PROSTHETIS

XEPOX

Art. code

TWO-PART EPOXY ADHESIVE

XP400150

Constructive solution: The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In extreme cases it is necessary the replacement of the damaged part through a timber prosthetis realized with new wood.

Product Description

100% Epoxy adhesive

The connection between the existing beam and the replaced new part is realized with metal elements

Excellent fluidness, wetting properties and adhesiveness

and epoxy resin conveniently designed in order to transfer the stres-

Different densities and sizes for multiple applications

ses. The connection can be realized with steel rods placed laterally or with inner steel plates with grip-

Volume inalterability and reliability over time

ping capacity.

Sold by volume


XEPOX MATERIAL RECONSTRUCTION

XEPOX

Art. code

TWO-PART EPOXY ADHESIVE

XP400100

Constructive solution: The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In many cases it is possible to reconstruct the wood material through steel rods and epoxy resins mixed with other material.

Product Description

100% Epoxy adhesive

The material reconstruction of the wood is realized through epoxy adhesive often mixed, for big

Excellent fluidness, wetting properties and adhesiveness

thickness/volumes, with gravel or sand conveniently worked; also pie-

Different densities and sizes for multiple applications

ces of wood can be used in order to fill the space. According to the specific application, also steel rods

Volume inalterability and reliability over time

conveniently shaped can be used.

Sold by volume


03RIABEN

8 054247 473136

XEPOX

Art. code

TWO-PART EPOXY ADHESIVE

XP400060/XP400080

Constructive solution: The reinforcement of timber beams can be realized through the fixation of a “steel-reinforced wood board” placed on the strained side of the beam. The wood board is fixed with epoxy adhesive and its efficiency is due to the steel rods.

Excellent adhesion between steel rod and wood

Excellent fluidness, wetting properties and adhesiveness

DIRECT CONSULTING AND TRAINING • Technical support for clients and technical operators

• Specific designing of requested items

• Problem solving for the design and realization processes

• Implementation of products using 3D design software for timber structures

TIMBER STRUCTURES statics

MEMBRANES AND ACCESSORIES technical physics

FALL ARREST SYSTEMS safety

CREATION OF DESIGN TOOLS

TECHNICAL DRAWINGS

COD

TWO-PART EPOXY ADHESIVE

INSTRUCTION PAPER

TECHNICAL DATASHEETS

CALCULATION SOFTWARE

Structural renovation en  

Structural renovation

Structural renovation en  

Structural renovation