Page 1

201 4 Product Catalogue

Working with local partners throughout Europe


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Table of Contents BENCH-TOP

BOBBIN WINDING MACHINE RANGE

WH 752 HEAVY DUTY TWO SPINDLE COIL WINDING MACHINE. WH 520 TWO SPINDLE “FLY WINDING” MACHINE. WH 764 FOUR SPINDLE COIL WINDING MACHINE. WH 751 ACCESSORIES. WH 751 AIR COIL WINDER WITH HOT-AIR BONDING. BOBBIN WINDING CONTROLLERS. WH 737 SINGLE SPINDLE HAND WINDER. TENSIONERS - FINE WIRE, LOW COST. MAGNETIC TENSIONERS. MAGNETIC TENSIONERS WITH TENSION RELEASE FINE WIRE AND HIGH SPEED THE NEW GENERATION WIRE CONSTANT FEEDING DEVICE TAILSTOCKS. ALCOHOL BATH DE-SPOOLER DRUM

4 7 8 9 11 12 14 16 17 18 19 20 21 24 25 25

FLOOR STANDING HEAVY DUTY BOBBIN WINDING MACHINE RANGE EZ-2500 WINDING MACHINE E-1200-SGB WINDING MACHINE E-1200 “SERVOTECH” WINDING MACHINE E-900 SGB WINDING MACHINE E-600 WINDING MACHINE EZ-300 WINDING MACHINE EZ-1200 C WINDING MACHINE STRIP FOIL WINDING MACHINE SERIES ERASAN’S RANGE OF WINDING MACHINE ACCESSORIES 4 COIL DE-SPOOLER - DESCRIPTION PROFILE WIRE GUIDER GP1 - SINGLE WIRE PROFILE WIRE GUIDER GP2 - MULTIPLE WIRES

26 27 28 29 30 32 33 34 37 39 40 42 43

FULLY AUTOMATIC BOBBIN WINDING MACHINE RANGE 4 SPINDLE MULTI AXIS AUTOMATIC WINDING MACHINE 6 SPINDLE MULTI AXIS AUTOMATIC WINDING MACHINE

44 45 47

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu 8 SPINDLE MULTI AXIS AUTOMATIC WINDING MACHINE. 12 SPINDLE MULTI AXIS AUTOMATIC WINDING MACHINE SKEINING UNITS. FULLY AUTOMATIC “AIR COIL” WINDING MACHINE

49 50 53 54

BENCH TOP TOROID WINDING MACHINE RANGE WH 900 TOROID WINDING MACHINE. WH 900A TOROID WINDING MACHINE. WH 300 TOROID WINDING / TAPING MACHINE. WH 900 TOROID TAPING MACHINE. WH 300 G7 TOROID WINDING MACHINE.

61 62 64 66 68 69

FULL CONTROL OF CORE ROTATION USING STEPPING MOTOR HOOK WINDER SKS "PULLWINDER" TAPE WINDER - "AIR JET" WINDING

70 71 71 72

SHOP-FLOOR PRODUCTION AIDS

COIL HANDLING / PACKING TRAYS. E I LAMINATION STACKING MACHINES. RANGE OF WIRE STRIPPING MACHINES IWM-LD ELECTRONIC LABEL DISPENSER IWM TAPING SOLUTIONS TENSIONER METERS. OUR EUROPEAN PARTNERS

73 74 75 76 77 78 79 80

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Bench-top Bobbin winding Machine range

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 800 Single spindle transformer winding machine. Specification Program

Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for compound windings.

Control

Spindle drive - High torque brushless DC induction motor producing a max torque 78.5 Ncm. Traverse - Constant current driven 4-phase stepper motor.

Application

Wire guide is capable of holding four wires at the same time for multiple windings e.g. standard EI transformers.

Package

Includes wire guide, margin tape & cover tape attachments and wire feeder system, with comprehensive manual.

Wire size

0.02 – 1.0 mm

Max pitch

10 mm

Winding width 110 mm (max) Bobbin dia

110 mm (max)

Max speed

6000, (optional) 3000 Rpm

Power

AC 230 / 110V Âą 10%, 50-60hz

Dims

760 x 680 x 720 mm

Net weight

37 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 800i Two spindle transformer winding machine. Specification Program

Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for compound windings.

Control

Spindle drive - High torque brushless DC induction motor producing a max torque 78.5 Ncm. Traverse - Constant current driven 4-phase stepper motor.

Application

Nozzle type wire guides feed each spindle, these are adjustable so that dual winding may be carried out successfully. Each guide is fed via a tension unit.

Package

Includes 2 x nozzle wire guides, 2 x tension units and cover tape attachment, with comprehensive manual.

Wire size

Typically 0.02 – 0.6 mm (1.0mm in single spindle mode).

Max pitch

10 mm

Winding width 110 mm (max) Bobbin dia

110 mm (max)

Max speed

6000, 3000 (optional)

Power

AC 230 / 110V Âą 10%, 50-60hz

Dims

760 x 680 x 720 mm

Net weight

37 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 752 Heavy duty two spindle coil winding machine. Specification Program

Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for compound windings.

Control

Spindle drive - High torque brushless DC induction motor producing a max torque of 157 Ncm.

Traverse

Constant current driven 4-phase stepper motor.

Application

Roller type wire guide and separate tension unit for each spindle. Wire guides adjust for dual winding.

Package

Includes 2 x roller wire guides and 2 x tension units, with comprehensive manual.

Wire size

0.3 – 1.6 mm

Max pitch

10 mm

Winding width 110 mm (max) Bobbin dia.

110 mm (max)

Max speed

3000 rpm

Power

AC 230 / 110 V ± 10%, 50 – 60 Hz

Dims

600 x 480 x 900 mm

Net weight

55 kg.

CE cert. no.

AE 9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 520 Two spindle “Fly winding” machine. Specification Program Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for compound windings. Control

Spindle drive-High torque brushless DC induction motor producing a max torque 78.5 Ncm. Traverse - Constant current driven 4-phase stepper motor. Index - Constant current driven 4-phase stepper motor.

Application

Nozzle type wire guides feed each spindle. Each guide is fed via a separate tension unit. With the Fly winding principle, wire is wound around the stationary core - ideal for motors.

Package

Includes 2 x nozzle wire guides, 2 x tension units and cover tape attachment, with comprehensive manual.

Wire size

0.03 – 0.6 mm

Max pitch

10 mm

Winding width 70 mm (max) Motor OD

8 - 50 mm

Motor Height

20 mm (max)

Max speed

3000 rpm

Power

AC 230 / 110V ± 10%, 50-60hz

Dims

700 x 350 x 100 mm

Net weight

65 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 764 Four spindle coil winding machine. Specification Program

Microprocessor controlled, capable of holding 999 program sequences, which may be run independently or in selected blocks for compound windings.

Control

Spindle drive - High torque brushless DC induction motor producing a max torque of 78.5Ncm. Traverse - Constant current driven 4-phase stepper motor.

Application

Nozzle type wire feeder heads on each spindle; these have adjustable parallelism so that multiple winding may be carried out. Each spindle is fed via a separate tension unit.

Package

Includes 4 x nozzle type wire feeder heads, 4 x tension units, and comprehensive manual.

Wire size

0.02 – 0.6 mm

Max pitch

10 mm

Winding width 100 mm (max) Bobbin dia.

100 mm (max)

Max speed

6000 rpm

Power

AC 230 / 110 V ± 10%, 50 – 60 Hz

Dimensions

1000 x 500 x 1000 mm

Net weight

60 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Heavy duty versatile single spindle coil winding machine WH 751. Specification Program

Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for complex windings.

Control

Spindle drive - High torque brushless DC induction motor.

Traverse -

Constant current driven 4-phase stepper motor.

Application

Bigger transformers and large wire windings, long coils, antennas.

Package

Base machine with belt selectable drive ratios for 3000 and 800 max. rpm, tensioner stand, tailstock, and comprehensive manual.

Accessories

Large choice of wire feeder heads and tensioners, taping attachments, variable speed foot switch.

Wire size

0.02 – 3.0 mm

Max pitch

10 mm

Bobbin dia.

200 mm (max)

Winding width 300 mm (max) 700 mm (option)* Net weight

58 kg

Dims

950 x 520 x 600 mm

Power

AC 230/110 VÂą10% 50/60Hz

CE cert. no.

AE 9955093 0 Max Speed (Rpm)

Max Torque (Nm)

800 / 3000

8.8 / 1.1

400 / 1600**

17.6 / 2.2

* This machine is also available with an extended bed for coils longer than 300mm. ** High Torque version available as an option. For examples of wire feeder heads and other accessories, please see overleaf. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 751 Accessories.

Roller feeder head

Multi-wire feeder head with margin taping

F71 fine wire tensioner

Pneumatic tailstock

Guide tube feeder head

Type “TCS, TCM� tensioner

Variable speed foot pedal

Roller feeder with micro adjustment

TCL heavy wire tensioner

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 751 Air coil winder with hot-air bonding. Many people believe that it is impossible to make air coils on a bench-top machine, but with the help of IWM YOU can do it! The advantages of making your own air coils include:Fast turn-around for prototypes Full control over the production process Flexibility and cost control All you need is:A Wey Hwang 751 air coil winding package Tooling design and manufacture & IWM know-how!

The WH-751 air coil Winding machine package

Package includes:WH-751 bobbin winding machine Tensioner and wire guide as required Safety heat-shield Heat gun Manual tailstock

Exact Air flow & Temperature control are essential

Precise control of the heat-gun air temperature and air flow rate, and exact positioning of the nozzle, warm the wire and the tooling just enough to guarantee perfect adhesion of wire to wire, with correct release from the tooling. Careful design of the tooling, and Wey Hwang’s advanced machine controllability, ensure reliable wire entry and exit from the coil every time. For the price of the tooling – refundable against machine order we can create tooling and wind you some samples to demonstrate quality (and cycle time) created from this package. Precision tooling creates precision coils

As these machines are custom made, please speak to us about the coil specification you wish to produce

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 751 Air coil winder with hot air bonding. We want to show you some examples of the capabilities of the machine. Coil Data

Wire ( mm)

ID ( mm)

Turns

Cycle time (Sec)

0.06

13

220

35

0.2

62 * 36

74

40

0.315

13

54

25

0.71

90

150

45

0.18

13

243

40

0.315

Triangular

277

45

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Bobbin winding controllers. Setting up a winding machine can be a long process, especially when adjustments can only be made mechanically. For a short production run – or even a one-off prototype - a fast solution is vital. The Wey Hwang CWC-01 digital controller is designed for rapid programming. Its design philosophy is based on moving as many mechanical adjustments into software as possible, giving fast change-over times from one job to another.

Simple setup

Footswitch can be used to start winding or as ‘deadman switch’ Option for variable speed control footswitch

Width

Parameter display shows Data Entered, or Turns Wound

Display shows Spindle speed or Quantity produced

Turns count can allow up to 99,999 turns to be wound in one operation

Memory allows up to 999 different coils to be stored Set the machine to resynchronise after 1 – 99 cycles – or on reset Wire Size

Option to start next winding from previous position, automatically

Start Point

Operator can lock spindle when in idle mode

The Start position and Winding Width can be set by jog buttons, physically moving the winding head to your chosen position, in steps of 0.02 mm.

Full Speed Control Speed High Speed (As a percentage of machine Low Speed capability) (As a Speed Start Low Speed End Typically; ~Start of Winding(Turns Low percentage before acceleration to high speed) (Deceleration turns before end of winding) 99% Typically; ~ 0.5 - 2 Typically; ~ 50 - 80 of machine turns The Wey Hwang digital controller… turns capability)

Rate of Acceleration and deceleration can be set, useful for controlling fine wire.

Turns End of Winding

“full of features” & “quick to set up”

Typically; ~ 8%

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 737 Single spindle hand winder. Specification Program

Simple mechanical counter, push button to reset.

Application

Hand feed spreading for simple coil winding – ideal for low turns count & prototypes

Package

Sturdy machine base - no need to fix to a bench, drive handle, mechanical counter & tool holder

Turns ratio

One turn of handle produces five turns of bobbin

Dimensions 45 x 28 x 25 cm

Net weight

10 kg

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Tensioners - Fine wire, low cost. Specification

These mechanical tensioners provide precision control of winding tension for wires in the range from 0.02mm to 1.2 mm. The arm position provides feedback to the system, adjusting the main friction wheel to regulate and maintain constant tension during the winding cycle. Felt pads provide pre-tension and remove dust and other debris from the wire. Ceramic eyelets and roller guides at each point of contact protect insulation from mechanical damage, and guide the wire. The performance of these units is exceptional given the low cost, providing outstanding value for money.

Model TCL/TCLL

Models TC3S - TCM

Model Type TC3S

Min Tension (grams) 2

Max Tension (grams) 11

Min Wire Gauge (mm) * 0.02

Max Wire Gauge (mm) * 0.04

TCSS-X

7

30

0.03

0.06

TCSS

9

50

0.04

0.08

TCS-E

20

130

0.06

0.13

TCS

40

200

0.08

0.16

TCM

90

500

0.16

0.25

TCL

200

2000

0.20

0.60

0.50

1.2

TCLL 1000 5000 * Copper magnet wire at recommended “Standard Tension�

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Magnetic Tensioners. Providing stable & consistent tension control over long periods. Wire tension is one of the critical parameters of any coil winding process, having an influence on product characteristics, particularly DC resistance. Tensioning devices are therefore required to ensure constant wire tension throughout the winding process. One major disadvantage of mechanical tensioning devices is that the friction materials are in contact with each other, resulting in mechanical wear. Therefore the tension may change from the set value over time. Key advantages of Magnetic Tensioners: These magnetic tensioners use a permanent magnet as a non-contact method of generating a variable friction on the main wheel of the tensioner, maintaining wire tension at the set value for long periods with no requirement for adjustment. The arm position provides feedback to the system, adjusting the main friction wheel to regulate and maintain constant tension during the winding cycle. Felt pads provide pre-tension and remove dust and other debris from the wire. Ceramic eyelets and roller guides at each point of contact protect insulation from mechanical damage, and guide the wire. The performance of these units is exceptional given the low cost, providing outstanding value for money.

Model Type MTCSS

Min Tension (grams) 4

Max Tension (grams) 40

Min Wire Gauge (mm) 0.03

Max Wire Gauge (mm) 0.07

MTCS

7

100

0.04

0.14

MTCM

15

500

0.06

0.25

MTCL

50

750

0.10

0.40

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Magnetic Tensioners with tension release Providing stable & consistent tension control over long periods. Wire tension is one of the critical parameters of any coil winding process, having an influence on product characteristics, particularly DC resistance. Tensioning devices are therefore required to ensure constant wire tension throughout the winding process. One major disadvantage of mechanical tensioning devices is that the friction materials are in contact with each other, resulting in mechanical wear. Therefore the tension may change from the set value over time. Key advantages of Magnetic Tensioners: These magnetic tensioners use a permanent magnet as a non-contact method of generating a variable friction on the main wheel of the tensioner, maintaining wire tension at the set value for long periods with no requirement for adjustment. The arm position provides feedback to the system, adjusting the main friction wheel to regulate and maintain constant tension during the winding cycle. Felt pads provide pre-tension and remove dust and other debris from the wire. Ceramic eyelets and roller guides at each point of contact protect insulation from mechanical damage, and guide the wire. The models shown here have a pneumatic cylinder (controllable from the winding machine) for tension release as required during pin wrapping operations. Model Type MTASS

Min Tension (grams) 4

MTAS MTAM

Max Tension (grams) 40

Min Wire Gauge (mm) 0.03

Max Wire Gauge (mm) 0.07

7

120

0.04

0.14

15

430

0.06

0.25

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Fine wire and High speed

Model Type F71 M65 DMA300 F71

M65

Min Wire Gauge (mm) 0.01 0.04 0.06

Max Wire Gauge (mm) 0.08 0.23 0.23

DMA300

Specification Arm position gives feedback to the system, adjusting the main friction wheel to regulate and maintain constant tension during the winding cycle. Back tension arm spring position scaled in grams and calibrated at the factory. Model Part number

F71

M65

Working Range

137.000.1 1,5 gr 50 grs (0,01 mm) (0,08 mm)

Max speed

15 M/s

Description

Part number

Cut out switch

137.000.2

135.000.2

120.000.2

137.000.8

135.000.8

120.000.8

N/A

135.000.3

120.000.6

Pneumatic release Double arm pulley

135.000.1 15 grs 350 grs (0,04m) (0,23mm)

DMA300

20M/s Options Part number

120.000.1

33 grs (0,06m)

350 grs (0,23mm)

25M/s Part number

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

The new generation wire constant feeding device Advanced Digital Display With ergonomic Keys for easy operation

Automatic compensating arm Wire ‘Storage and Release’ capability able to manage sudden wire absorption or release during the working process and simultaneously keeping the wire feeding tension at the set value (Patent). MotorDual Driven andFeeding suitableSystem to self Drive adjustcontrol accordingly to the seta constant winding feeding and maintain Tension Profile (input) tension during the entire process. Motor torque control System CONSTANT WIRE TENSION CONTROL Tension Sensor – precision load cell

Fully programmable easy parameter setting(Tension Profiler, % tolerances, ...) for diversified working conditions. High Tech Digital Technology Featuring simultaneous dual control on both wire feeding tension and wire running speed for a complete feeding control. Tension Profiler Function possibility to program up to 2 different wire feeding tension values without any interface/connection to the coil winding machine or up to 4 different wire feeding tension values during winding cycle, utilising two digital inputs. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

BENEFITS

A A

A

Impressive Versatility Fully programmable parameters according to the wire and application requirements and possibility to dynamically modify tension according to the manufacturing process stage (‘Tension Profiler’ Function). wide application range single device able to cover a wide wire tension and diameter range. Production Process Efficiency Maximisation Able to work at maximum machine speed, thus dramatically reducing wire breakage Minimises Labour Costs Minimised machine operator time, thanks to advanced and user-friendly programming options. Centralised programming and monitoring Matrix controller external unit able to program and control CWF units at a glance and monitoring the whole process production status also in graphical form. Performance drastic process simplification, simultaneous TOP Quality, Accuracy and Repeatability results. Fully programmable easy parameter setting (Tension Profiler, % tolerances, ...) for diversified working conditions. compact Solution easy plug & play installation.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Multi wire and tape Feeder Head    

Used for producing multi-winding transformers at one workstation Allows use of up to 4 different wire sizes without rethreading Felt pads for cleaning of wire and back tension Includes margin tape and cover tape attachment

Guide tube feeder head     

Ceramic parts at every wire contact point, to protect the wire coating Guide tube places wire accurately Independent micro-adjustment for more than one spindle. Felt pad for cleaning of wire and back tension Takes guide tubes of inside diameter 0.3 ~ 1.2 mm

Fixed roller feeder head with micro adjustment   

Durable brass rollers to control heavy gauge wire Independent micro-adjustment for more than one spindle. Felt pad for cleaning of wire and back tension

Variable angle roller feeder head   

Durable brass rollers to control heavy gauge wire Adjustable angle of feed. Adjustable roller position enables wire pre-bend / straightening.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Tailstocks.

Large bobbins / solenoids and air coils need a tailstock to support the outer flange during winding. The WH-751 machine can be fitted with either a manual or a pneumatic tailstock, and either option can be mounted or removed in minutes. All tailstocks are adjustable for left-to-right position, and are provided with a removable precision angular contact bearing.

Heavy Duty

Specifications

Pneumatic

25 mm 180 mm

Stroke length Maximum clearance when open, from tool holder face to tailstock bearing face Bearing ID to locate tool Air supply

50 mm 150 mm

10mm N/A

8mm 5 Bars

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Alcohol Bath Key features: Ceramic rollers and grommets at every wire contact point, to prevent damage to the wire coating  Removable alcohol reservoir – refill in seconds, without having to rethread the wire  Adjustable integral ceramic wire guide, removable for easy cleaning  Independent micro-adjustment for more than one spindle  Choice of felt pad application for fine wire or rollers to immerse into alcohol for thicker wire

De-spooler Drum Key features: Internal Diameter 224 mm  Internal Height 295 mm  Ceramic grommet at wire exit point to prevent damage to wire coating  Anti-slip mat to secure wire spool  Easy assembly for fast changeover

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Floor Standing Heavy Duty Bobbin winding Machine range We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

EZ-2500 WINDING MACHINE DESCRIPTION. The EZ-2500 is a floor standing style winding machine, Large size to be easily placed in a factory or workshop, equipped with head and bench in galvanised steel and covered in stainless steel, face plate, tailstock with security closure, guider system and foot pedal. The machine is governed by numeric control and CNC electronic programming. This machine is specially designed for the manufacture of re-winds, large rotor coils for use in wind turbine industry, using aluminium or copper wires, including rectangular or flat wires with a special guider. The concept and design facilitates the placement of necessary accessories such as end-fillers or insulation paper in foil, of various levels.

TECHNICAL CHARACTERISTICS.

Wire ďƒ† ........................................................................................................ 0.01 – 30 mm Winding speed ................................................................................................. 0 - 60 r.p.m Max. winding length ........................................................................................... 2.250 mm Max. Distance between points ............................................................................ 2.500 mm Spindle height (from floor) ................................................................................. 1.300 mm Tailstock movement ............................................................................................ 1.500 mm Guider precision ...................................................................................................... Manual Main shaft motor ..................................................................................................... 7.5 HP Guider motor .......................................................................................... 0,3HP (Brushless) Power source ......................................................................................... 3 x 380Vca - 50Hz Weight ................................................................................................................. 1,500 Kgs

PROGRAMMING CHARACTERISTICS. Standard with the machine, turns counter, simple program ............................................... By request, electronic control .............................................................................. CMZ240 Max. No. of programmable windings ................................................................ Max. 130 Max. No. of windings per coil ............................................................................. Max. 12 Type of programming ................................................................................................ CNC DELIVERY TIME ........................................................ 60 Days from order confirmation. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E-1200-SGB WINDING MACHINE DESCRIPTION. The EZ-1200-SGB provides ultimate flexibility in terms of torque and winding speeds, provided by the innovative four ratio gearbox. It is available in two versions – “Standard” and “High Torque”, according to the customer’s requirement. It is a floor standing winding machine, medium sized, equipped with head and bench in heavy gauge galvanised and welded steel, fixture plate, tailstock with security closure, guider system protection and foot pedal. The machine is controlled by a state-of-the-art CNC with electronic programming, and is designed for the manufacture of solenoids and power and distribution transformers from 10 to 2000 KVA. Aluminium or copper wires, including rectangular or flat wires, can be wound with a special guider. The wide range of winding speeds, (up to 750 r.p.m,) allows primary and secondary windings to be carried out on the same machine, thus reducing the number of production processes. The concept and design allows various accessories to be mounted as required, for end-fillers, insulation paper or foil.

TECHNICAL CHARACTERISTICS

Wire  (and profile wire) .............................................................................................. Max winding length ....................................................................................................... Max distance between points ......................................................................................... Max winding  .............................................................................................................. Guiding precision ........................................................................................................... The standard machine is available with either high speed or low speed gear ratios.

0.01 – 30 mm 1.100 mm 1.200 mm 800 mm 0,01mm

TORQUE AND SPEED Gear Position 1 2 3 4

500 RPM Low Speed Torque (Nm) Speed (Rpm) 168 500 252 333 504 166 756 111

750 RPM High Speed Torque (Nm) Speed (Rpm) 112 750 168 500 336 250 504 166

Various gear ratio and motor combinations are available according to the customer’s requirement, including high torque versions. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E-1200 “SERVOTECH” WINDING MACHINE DESCRIPTION. The E-1200 “SERVOTECH” is a state-of-the-art winding machine with highly advanced features, including an automatic gearbox, energy efficient servo motors, and intelligent torque boosting technology. It is equipped with head and bench in heavy guage welded and galvanised steel, faceplate, tailstock with rotating centre, guider system, security closure and foot pedal. The machine is operated by a powerful CNC with userfriendly electronic programming. The energy efficient design concept reduces power consumption. All motors are synchronous and each movement has been optimised for maximum energy efficiency. The automatic gearbox is a new feature of the “SERVOTECH” model, enabling the appropriate gear ratio to be selected by software. This machine is specially designed for the manufacture of solenoids and power and distribution transformers from 10 to 2000 KVA, using aluminium or copper wires, including rectangular or flat wires with a special guider. The wide range of winding speeds (up to 485 r.p.m) permits primary and secondary windings on the same machine, thus reducing the cycle time for many production processes. The concept and design allows various accessories to be mounted as required for end-fillers, insulation paper or foil

TECHNICAL CHARACTERISTICS

Wire  (and profile wire) ................................................................................................................ Max winding length ......................................................................................................................... Max distance between points ........................................................................................................... Max winding  ............................................................................................................................... Guiding precision ............................................................................................................................ Winding shaft speed (Max.) ............................................................................................................

Automatic Gear No. 1 2

Low speed Version Torque Speed (Nm) (Rpm) 410 244 1232 81

0.01 – 30 mm 1.100 mm 1.200 mm 800 mm 0,01mm 244/485 rpm

Flexible Versión Torque Speed (Nm) (Rpm) 205 485 1232 81

Main shaft motor ............................................................................................................................. Guider motor (Brushless) ................................................................................................................ Air supply ........................................................................................................................................ Electrical supply .............................................................................................................................. Max load between points (coil weight) ........................................................................................... Approx machine weight...................................................................................................................

Brushless servo motor 0.4 HP / 300 W Not required 3 x 400Vca - 50Hz 1,000 Kgs 1,300 Kgs

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E-900 SGB WINDING MACHINE Medium-sized bench Winding Machine. Equipped with:  Traverse head  Face plate.  Sturdy base - constructed  Guider system from welded steel for strength  Safety shielded foot pedal. and durability.  CNC motion controller and simple electronic programming.  Tailstock - with security lock. The applications of this machine include the manufacture of solenoids, inductors, and transformers, with capacity to make multiple windings and even distribution and power transformers from 10 to 600 KVA. There are various configurations of speed ranges, up to 3.000 r.p.m. This allows winding of primaries easily and with very short production cycle times.

TECHNICAL CHARACTERISTICS. Wire  and profile wire ........................................................

0.01 – 10mm

Max winding length ..............................................................

800 mm

Max distance between points ................................................

900 mm

Max Winding  ....................................................................

560 mm

Guider precision ....................................................................

0.01 mm

Winding shaft speed. .............................................................

1,500 /3,000 r.p.m**

Torque and speed Gear Position

(** There are two versions of this machine each having four gear positions) 1500 RPM version Torque (Nm)

Speed (Rpm)

3000 RPM version Torque (Nm)

Speed (Rpm)

1

26

1500

15

3000

2

39

1000

19

2000

3

156

250

78

500

4

234

166

117

330

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Key new features of this machine - EZ-SGB (Switch Gear Box) Range. PROGRAMMING CHARACTERISTICS. User interface .........................................................................

12inch (304mm) touch screen

No. of programmable windings .............................................

Max. 16,000 (per SD card)

No. of windings per coil.........................................................

Max. 200

Type of programming ............................................................

CNC

DELIVERY TIME .................................................................

60 Days from order confirmation.

Increased flexibility for the machine speed ranges and higher torque has been achieved by the use of a powerful brushless servo motor, and equipping the machine with a 4-speed gear box. This allows the operator to select an appropriate maximum winding speed and torque for each individual task.

The all-new machine operating software has an intuitive graphical interface and a 12-inch (304mm) full colour touch screen - with user’s choice of language - making programming a new coil easier than it has ever been. Program storage is now done directly to a standard SD card. This allows a fast simple backup, with the option of windows ™ software, WIN bobbin for full PC connectivity. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E-600 WINDING MACHINE DESCRIPTION Medium-sized “Power house!” Winding Machine. Equipped with:  Traverse head  Sturdy base  Tailstock - with security lock,  Guider system  & Safety shielded foot pedal.  Controlled by numeric PLC and electronic programming. This machine is designed for the manufacture of solenoids, inductors, distribution and power transformers, with capacity to make multiple windings and a wide range of wire sizes. There are various configurations of speed ranges, (depending machine version). This produces a fast cycle time for high turn primary windings.

TECHNICAL CHARACTERISTICS. Max. Distance between points ......................................... 650mm Max winding length. ........................................................ 600mm Max.  of winding. ......................................................... 420mm Height from center face plate to machine base. ................ 300mm Face plate diameter. .................................................................................................................... 220mm Tailstock Morse Cone ...................................................................................................................... Nº 2 Guider precision ...................................................................................................................... 0,001 mm Spindle Resolution ...................................................................................................................0,01 turns Main shaft motor (Parker)..................................................................................... Brushless servomotor Guider motor (Brushless servomotor) ..........................................................................................1.2Nm Weight (approx) ........................................................................................................................... 250 Kg Electrical source .............................................................................................................. 220Vac - 50Hz

Torque and speed Winding shaft speed...................................................................................................400 rpm / 300 rpm (** There are many version of this machine, two examples are shown here) Belt Position 1

version - 400 RPM

version - 300 RPM

Speed (Rpm)

Torque (Nm)

Speed (Rpm)

Torque (Nm)

400

70

300

130

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

EZ-300 WINDING MACHINE DESCRIPTION Small-sized bench Winding Machine. Equipped with:  Traverse head  Sturdy base  Tailstock - with security lock,  Guider system  & Safety shielded foot pedal.  Controller by numeric PLC and electronic programming. The applications of this machine is intended for the manufacture of solenoids, reactances, transformers, with capacity to make multiple windings and even distribution and power transformers. There are various configurations of speed ranges, up to 9.000 r.p.m. This allows winding of primaries easily and with very short production cycle times.

TECHNICAL CHARACTERISTICS. Wire  . ............................................................................ Max. Winding length ........................................................ Max. distance between Centres. ....................................... Max. Winding  . ............................................................. Winding shaft speed. .........................................................

0.01 – 2.5mm 300 mm 500 mm 250 mm

A) ................................................................................... 840 rpm / 1500 rpm / 3000 rpm B) ................................................................................... 1500 rpm / 3000 rpm / 6000 rpm C) ................................................................................... 3000 rpm / 6000 rpm / 9000 rpm

Guider precision. ............................................................... Main shaft motor power . .................................................. Guider motor power. ......................................................... Electrical source. ...............................................................

0,001 mm 2 HP 0,4HP (Brushless) 3 x 380Vca - 50Hz

PROGRAMMING CHARACTERISTICS. Max. No. of programmable windings (Standard 50) ........ Max. 175 Max. No. of windings per coil (Standard 20) ................... Max. 200 Type of programming ....................................................... CNC DELIVERY TIME ................................ 60 Days from order confirmation We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

EZ-1200 C WINDING MACHINE DESCRIPTION. Robust and reliable, the E-1200C winding machine is a floor standing style winding machine. The sturdy chassis is manufactured from heavy guage welded steel for durability, painted for ease of cleaning and maintenance. The machine consists of a headstock with speed change, face plate, and pedal. Due to the intended application of this machine, it does not have a bench or wire guiding system This machine is specially designed for the manufacture of solenoids and power and distribution transformers from 10 to 1.200 KVA, using aluminium or copper wires, including rectangular or flat wires.

TECHNICAL CHARACTERISTICS. Maximum winding shaft speed. ............................................................ 500 r.p.m Winding shaft slow speed. ................................................... 0 – 20-60-120 r.p.m Maximum coil diameter. ......................................................................1,600 mm Maximum torque (low speed) .................................................................. 80 Kgm Main motor. .................................................................................. 5 HP (3.7 kW) Power source. ........................................................................ 3 x 380Vca - 50Hz Air supply ................................................................................ 6 bar (minimum) Delivery .............................................. 90 DAYS from confirmation of the order.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

FOIL WINDING MACHINE SERIES One of the latest developments at Erasan Zinzo, is the range of foil winding equipment being developed, with hightech control features, improving quality of winding and reducing maintenance to a minimum. Shown below are some of the machines already delivered along with concept drawings showing a basic machine layout.

There are various configurations possible, up to 1500mm width. This allows winding of primaries easily and with very short production cycle times.

By using very large powerful “Parker motor� with integrated gear box drive systems, a strong robust machine construction is achieved

Expanding mandrels are made in house, to suit the exact requirement of the machine and product to be made.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Various stages / process of automation can be added to the function of the machine according to your requirements. Shown here is a cold pressure welding station, used for fixing the terminal leads “in-line� during the winding.

Please contact your local partner for more information TECHNICAL CHARACTERISTICS. Various configurations of machine available depending on your application requirements, For example:1 foil, 1 insulator // 1 foil, 2 insulators // 2 foils, 2 insulators. Max foil width ........................................................

600, 900 up to 1500 mm

Guider precision .....................................................

built in sensor detecting the foil edge creates a continuous feedback loop to ensure precise turn on turn foil layering

Type of programming .............................................

CNC- industrial PC

DELIVERY TIME ..................................................

6-9 months from order confirmation. (Please confirm at time of order)

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

STRIP FOIL WINDING MACHINE SERIES One of the latest developments at Erasan Technology is the range of foil winding equipment, with high-tech control features, improving quality of winding and reducing maintenance to a minimum. Primarily used for winding of Cast Resin / Air Cooled transformers, the machines shown below are some of those already delivered, along with concept drawings showing a basic machine layout. There are various configurations possible, with coil widths up to 2.3M with a winding area of 1.8M. This allows winding of a wide range of transformer sizes and number of strips as required.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

The system incorporates high torque Parker servo motors with integrated reduction drive systems for precision control.

Each mandrel’s foil or insulation has independent traversing system, with feedback from an edge sensor, producing perfectly aligned coils

Additional processes and stages of automation can be included in the function of the machine according to your requirements. Shown here is a cold pressure welding station, used for fixing the terminal leads “in-line” during the winding.

Please contact your local partner for more information TECHNICAL CHARACTERISTICS. Various configurations of machine available depending on your application requirements. For example:- 1 foil, 1 insulator // 1 foil, 2 insulators. Max foil width ................................................................. 25 up to 150 mm Max foil Thinness............................................................ 0.1 up to 1.5mm-Al (1.2mm-Cu) Extent of traverse ............................................................ up to 6,000 mm Max Distance between points.......................................... up to 2,300 mm Max coil width ................................................................ up to 1,800 mm Max coil Diameter ........................................................... up to 1,300 mm Max coil weight ............................................................... up to 2.000 Kg Guider precision .............................................................. Built in sensor detecting the foil / paper edge creates independent continuous feedback loop to ensure precise turn on turn foil layering. Type of programming...................................................... CNC- industrial PC We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Erasan’s range of Winding machine accessories The Erasan range of heavy duty coil winders often require a tensioning device mounted behind the machine. For wire sizes greater than 1.0mm the best method is to apply a braking force to the supply spool itself and not the wire. Shown below are some the devices previously commissioned. Number of spools 1 2 4

32

Example layout drawing of 4 spool version.

TECHNICAL CHARACTERISTICS. Number of spools ....................................................................... 1, 2, 4, 32 versions available Wire  ....................................................................................... 0.01 – 99 mm Spool Diameter ........................................................................... up to 500/750 mm Braking method ........................................................................... pneumatic controlled hydraulic caliper Delivery time ............................................................................... 60 Days from order confirmation We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

4 Coil De-spooler - DESCRIPTION This is a floor standing de-coiling machine, medium sized and easily placed in a factory or works. Profile wire decoiling device, two levels, 4 spool capacity, with hydraulic disc braking system pneumatically controlled. All controls brought up to the machine, as shown below with hydraulic gauge indicators, and tension release switch:-

TECHNICAL CHARACTERISTICS Max Weight per coil ....................................................................

250 Kgs

Max coil (spool) ďƒ† ......................................................................

750 mm

Max No Spools .............................................................................

4 pcs

Please note that 1, 2, 8 & 32 spool versions are also available Please speak with your local representative for further information or custom requirements. We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

DH5 TENSIONER DESCRIPTION. The EZ-H5 is a floor standing style heavy duty tensioner. Suitable for wires 0.5 to 5mm in diameter. For maximum stability, provision has been made to enable this unit to be bolted to the floor. The wire is perfectly guided as soon as it leaves the supply spool, through clips with soft felt pads and a set of adjustable pulleys to give the desired pre-tension, according to the thickness of the wire and without damaging the insulation. The brake pulley is controlled by two brakes, with independent pneumatic regulation for each. One of the brakes regulates the tension that is to be applied to the wire while winding and the other brake has a servo-control to maintain this tension as constant as possible, depending on the form of the coil being wound. The pneumatic regulation is made by means of two pressure regulators (one for each pneumatic cylinder) which are incorporated in a box with air pressure gauges. This box may be situated in the most comfortable position and as close to the operator as necessary, thus avoiding unnecessary trips back and forth and production loss. There is adjustable height positioning of the de-reeling cone on the column to match your supply spool height.

Maximum spool diameter ................................................ 500 mm Maximum spool height .................................................... 650 mm Working method........................................................... Pneumatic Dimensions (mm) .................................................. 670x540x1755 Weight ................................................................................. 95 Kg DELIVERY TIME .................. 60 Days from order confirmation. (Please confirm at time of order) We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Profile Wire Guider GP1 - Single wire The Erasan range of heavy duty coil winders require a guide head system suitable for the application to be wound, many factors influence the choice of guide head, from wire size to wire type / profile etc. Shown below is the single profile wire guider, please do ask your local agent if you require a custom solution.

The guide head angle is adjustable; Course adjustment in steps of 18° Fine adjustment from bolt underneath The front roller is also adjustable in height / angle. This “negative effect” roller can be used to produce an upward curve on the wire. When wound onto the flat sides of the bobbin the inverse curve of wire presses against the long flat edges of the bobbin, reducing the bow effect

The guide head has four profile rollers adjustable width & wire insulation protecting Teflon side walls, as well as outer “V” groove roller for round wire

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Profile Wire Guider GP2 - Multiple wires The Erasan range of heavy duty coil winders require a guide head system suitable for the application to be wound, many factors influence the choice of guide head, from wire size to wire type / profile. Shown below is the multi profile wire guider, however please do ask your local agent if you require a custom solution. This guide has at the rear, a series of four parallel roller sets, each mounted at 90° to the previous one and independently adjustable.

The reason for this is to bring multiple wires coming from different supply spools together – forming a single packet to then wind onto the core / bobbin. The front section of the guider head has two profile rollers adjustable width & Teflon side walls to protect the wire insulation.

The front roller is also adjustable in angle. This “negative effect” roller can be used to produce an upward curve on the wire, meaning when wound onto flat sides of bobbin, the inverse curve of wire presses against the long flat edges, reducing the bow effect

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Fully Automatic Bobbin winding Machine range


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

4 Spindle Multi Axis Automatic Winding Machine Application: Relays, Automotive ABS coils, LCD coils, transformers, ignition coils, inductors, sensor coils, solenoids DVD reader, Inverter, Switching Power Supplies, Ballast Transformer and other bobbin-wound products.…

Main features:  The wire guide movement can be freely programmed in all 3 axes (X, Y, and Z).  Wraps either radial or axial pins, - programmable nozzle movement through 0° and 90°angles.  Wire cutting on bobbin pin, nozzle cut or nipper. Method can be chosen by operator and setup in the program.  Simplified programming with teach-in programming system using 15” touch screen, windows based interface, industrial PC with USB, Ethernet network and DVD ROM facilities.  Easy to change tooling and machine set-up recalled from the onboard computer when changing product.  Fully CE compliant.

Options:  Air nipper for larger wire.  Load and unload shuttle transfer system.  Skeining (twisting) unit.  Customised accessories to suit your application.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Main technical specifications No. of spindles

4

Wire size

0.02-0.5 mm

Max traverse width

85 mm

Spindle pitch

105 mm

Max bobbin diameter

100 mm – less if load unload system used

Spindle speed

9,000 rpm

Spindle position accuracy

+- 0.1°

Guide head drive motor

200W AC servomotor X , Y and Z axis

Max movement of guide head

X(left/right) 100 mm Y(front/back) 75 mm Z(up/down) 65 mm

Nozzle positions

0°, 90° or 120°

Max pin wrap speed

150 Turns / min

Control system

Windows interface PC with USB connector & DVD ROM

Interface

RS232 or USB

Touch screen

15 inch

Air supply

6 Bar

Power supply

single phase 220V +-10% 50Hz

Power consumption

3kwA

Weight

450 Kg

Dimensions (cm)

110(W) x 130(L) x 155(H) – excluding wire spool stand

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

6 Spindle Multi Axis Automatic Winding Machine Application: Relays, Automotive ABS coils, LCD coils, transformers, ignition coils, inductors, sensor coils, solenoids DVD reader, Inverter, Switching Power Supplies, Ballast Transformer and other bobbin-wound products.…

Main features:  The wire guide movement can be freely programmed in all 3 axes (X, Y, and Z).  Wraps either radial or axial pins, programmable nozzle movement through 0° and 90°angles.  Wire cutting on bobbin pin, nozzle cut or air nipper. Method can be chosen by operator and setup in the program.  Password function, prevent accidental program change.  Simplified programming with teachin programming system using 15” touch screen.  Easy to change tooling and machine set-up recalled from the onboard computer when changing product.  Fully CE compliant.

Options:  Air nipper for larger wire.  Load and unload shuttle transfer system (as shown).  Skeining (twisting) unit (as shown).  Customised accessories to suit your application.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu Main technical specifications No. of spindles

6

Wire size

0.02-0.5 mm

Max traverse width

85 mm

Spindle pitch

70 mm

Max bobbin diameter

62 mm – 32mm if load unload system used

Spindle speed

18,000 rpm

Spindle position accuracy

=> 0.1°

Guide head drive motor

200W AC servomotor X , Y and Z axis

Max movement of guide head

X(left/right) 100 mm Y(front/back) 75 mm Z(up/down) 65 mm

Nozzle positions

0°, 90° or 120°

Max pin wrap speed

150 Turns / min

Control system

Windows interface PC with USB connector & DVD ROM

Interface

RS232 or USB

Touch screen

15 inch

Air supply

6 Bar

Power supply

single phase 220V +-10% 50Hz

Power consumption

3 KVA

Weight

450 Kg

Dimensions (cm)

110(W) x 130(L) x 155(H) – excluding wire spool stand

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

8 Spindle Multi Axis Automatic Winding Machine. Application: Relays, Automotive ABS coils, LCD coils, transformers, ignition coils, inductors, sensor coils, solenoids DVD reader, Inverter, Switching Power Supplies, Ballast Transformer and other bobbin-wound products.…

Main features:  The wire guide movement can be freely programmed in all 3 axes (X, Y, and Z).  Wraps either radial or axial pins, programmable nozzle movement through 0°, and 90°angles.  Wire cutting on bobbin pin, nozzle cut or air nipper. Method can be chosen by operator and setup in the program.  Password function, prevent accidental program change.  Simplified programming with teach-in programming system using 15” touch screen.  Easy to change tooling and machine setup recalled from the onboard computer when changing product.  Fully CE compliant.

Options:  Air nipper for larger wire.  Load and unload transfer system (as shown).  Skeining (twisting) unit (as shown).  Customised accessories to suit your application.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu Main technical specifications No. of spindles

8

Wire size

0.02-0.5 mm

Max traverse width

85 mm

Spindle pitch

55 mm

Max bobbin diameter

50 mm – 25 mm if load unload system used

Spindle speed

18,000 rpm

Spindle position accuracy

=> 0.1°

Guide head drive motor

200W AC servomotor X , Y and Z axis

Max movement of guide head

X(left/right) 100 mm Y(front/back) 75 mm Z(up/down) 65 mm

Nozzle positions

0°, 90° or 120°

Max pin wrap speed

150 Turns / min

Control system

Windows interface PC with USB connector & DVD ROM

Interface

RS232 or USB

Touch screen

15 inch

Air supply

6 Bar

Power supply

single phase 220V +-10% 50Hz

Power consumption

3 KVA

Weight

540 Kg

Dimensions (cm)

110(W) x 130(L) x 155(H) – excluding wire spool stand

12 Spindle Multi Axis Automatic Winding Machine We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Application: Relays, Automotive ABS coils, LCD coils, transformers, ignition coils, inductors, sensor coils, solenoids DVD reader, Inverter, Switching Power Supplies, Ballast Transformer and other bobbin-wound products.…

Main features:  The wire guide movement can be freely programmed in all 3 axes (X, Y, and Z).  Wraps either radial or axial pins, programmable nozzle movement through 0°, and 90°angles.  Wire cutting on bobbin pin, nozzle cut or nipper. Method can be chosen by operator and setup in the program.  Password function, prevent accidental program change.  Simplified programming with teach-in programming system using 15” touch screen.  Easy to change tooling and machine set-up recalled from the onboard computer when changing product.  Fully CE compliant.

Options:  Automatic load / unload system.  Load and unload shuttle transfer system (as shown below).  Skeining (twisting) unit.  Customised accessories to suit your application.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Main technical specifications No. of spindles

12

Wire size

0.02-0.3 mm

Max traverse width

85 mm

Spindle pitch

55 mm

Max bobbin diameter

45 mm

Spindle speed

12,000 rpm

Spindle position accuracy

+- 0.1°

Guide head drive motor

200W AC servomotor X , Y and Z axis

Max movement of guide head

X(left/right) 100 mm Y(front/back) 75 mm Z(up/down) 65 mm

Nozzle positions

0°, 90° or 120°

Max pin wrap speed

150 Turns / min

Control system

Windows interface PC with USB connector & DVD ROM

Interface

RS232 or USB

Touch screen

15 inch

Air supply

6 Bar

Power supply

single phase 220V +-10% 50Hz

Power consumption

3kwA

Weight

650 Kg

Dimensions (cm)

110(W) x 150(L) x 155(H) – excluding wire spool stand

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Skeining units.

4, 6, 8 and 12 Spindle versions available. Application: When making a fine wire connection to a bobbin pin, the mechanical strength of one wire strand may not be sufficient. Also very fine wires will dissolve / melt in the solder, preventing a good connection from being made. One method to solve these two problems is to "twist the wire" forming reinforced start and finish leads to the winding where the wire is wrapped on to the termination pin, easing the solder process.

Main technical specifications Number of Spindles

4, 6, 8 & 12 Spindle versions

Wire size

0.02-0.1 mm

Number of Turns / Twists

Programmable

Skein / Twist length

20 - 300 mm (Adjustable)

Max Speed

3000 Rpm

Distance Between Spindles

51mm

Skeining motor

200W AC Servo

Hook motor

200W AC Servo

Nozzle options

Bore size

Wire range

0.3 mm

0.02 - 0.05 mm

0.5 mm

0.06 - 0.08 mm

0.8 mm

0.08 - 0.10 mm

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Fully automatic “Air coil” winding machine

Application: For winding self supporting coils using thermo-plastic coated wire. The wire is wound onto a former and the turns “bonded” together. The former is then removed and the finished coil ejected from the machine. Products include: RFID coils. laser heads, voice coils, magnet coils, sensor coils, vibrator coils and pancake motor coils.

Main features:  Automatic clamp/cut system, layer winding, material unloading during each cycle  Fine programmable pitch control enabling precise layer winding. Main technical specifications Coil diameter - max Max Coil width larger available on request

Wire size Motor driver Controlling system freely programmable Programmable pitch resolution Bonding method Spindle position accuracy Max spindle speed Air supply // consumption Power supply Power consumption Weight Dimension

40 mm < 10 mm 0.04 - 0.30 mm CNC 6 Axis AC servo motor synchronizing control Windows interface PC with USB connector & DVD ROM 0.01mm Hot air Max 600℃ 3Kw heater element All models are available with alcohol application ±0.1° 3000 rpm 4.5-6 Bar // 80-100 L/min AC220V ±5% 50HZ 4KVA ( including hot air bonding) 200 Kg 550(L) × 900(W) × 1400(H)

 15” touch screen for easy setup, with industrial PC, network card, USB program storage – space is no longer a problem.  Synchronous drive tailstock ensures precise tool alignment and allows for smaller core ID’s.  Temperature of the hot air system is freely programmable.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH-420 Flat Wire Winding Machine Application: Chokes, DC / DC converter or any product using flat wire.…

Options: Unload shuttle transfer system or chute to box. Customised accessories to suit your application.

Main technical specifications Wire Type

Flat Wire

Spread Pitch

Set according to the size of flat wire

Spread Width

100mm (Max)

Winding Diameter

100mm (Max.)

Main Motor

2HP Gear motor

Spread Motor

Stepping motor

Memory Power Source

999 steps 220V AC 10%; 50 / 60 Hz

Net Weight

220 KGS

Dimension

130 x 110 x 180 cm

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Multi Axis Automatic Winding Machine RFID CHIP INDUCTOR WINDING. Application: 0603, 0805, 1008 chip sizes and other ferrite-wound products.…

Main features:  The wire guide movement can be freely programmed in all 3 axes (X, Y, and Z).  Built-in welding system to connect start and finish leads.  Bowl fee ferrite component, Wire cutting on tooling clamp, guide over start pad on ferrite, weld, winding, guide over end pad, weld, cut end wire, remove ferrite, unload - all preformed in a fully automatic way.  Password function, prevent accidental program change.  Simplified programming with teach-in programming system using 15” touch screen.  Easy to change tooling and machine setup recalled from the onboard computer when changing product.  Fully CE compliant.

Options:  Load and unload to tape and reel.  Various tooling can be designed depending on component requirements.  Customised accessories to suit your application.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Main technical specifications No. of spindles

1

Wire size

0.025-0.1 mm

Spindle speed

3,000 rpm

Spindle position accuracy

=> 0.1°

Nozzle movement

0.001 mm

Spindle control

Winding spindle 3 Axis servo motor

Welding machine

Adjustable parameters, 0-300 / Touch time 3ms

Control system

Panasonic FP ∑ system

Interface

Delta DOP-A57

Touch screen

15 inch

Air supply

6 Bar

Power supply

single phase 220V +-10% 50Hz

Power consumption

3 KW

Weight

120 Kg

Dimensions (cm)

1070(W) x 800(L) x 1880(H) – excluding wire spool stand

Welding table 2 axis stepper motor

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

PF-220 Spring coiling machine 2 axis CNC Air coil former.

Application: Providing a flexible solution to air coil manufacture, with a wide wire range. There are 2 models for the machine, PF-220 for 0.3 – 2.0 mm magnetic wire, the second model PF-250 for 2.0 – 5.0 mm magnetic wire. Optional accessories to the machine include wire straightening, stripping, strip inspection, soldering, hot air bonding, wire feeding, and leg forming. Most magnetic material, round, flat or rectangular shape, can be used on the same machine with different tooling.

Main technical specifications Wire range (steel)

0.3~2.0mm

Max product Width

40mm

Max. length of front leg

50 mm

Max. length of rear leg

50 mm

Wound direction

CW & ACW (Adjustable)

Min wire feed step

0.01mm

Max wire feed step

99999 mm

Max wire feed

100 mm

Min angle

0.1degrees

Max angle

359.9 degrees

Production speed Power supply

300 pcs / Min (depends on product specification) three phase 220V +-10% 50Hz

Weight

350 Kg

Dimensions (cm)

142(W) x 90(L) x 180(H) – excluding wire spool stand

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Example coils produced on this machine

Accessories Magnet Wire Stripper

For Cu wire mm

Heating Unit

Profile Magnifier PE-10

0.3~ 2.5 Gives 100*, 200* or up to 300 * magnification

Soldering unit Supplies up to 600deg hot air for Cu wire bonding applications

WF- 6 Wire payoff specifications

For Cu wire to pre tin stripped leads

Max Load

60Kgs

Disk Dia.

600mm

Rotational speed

Std 90RPM â&#x20AC;&#x201C; optional 120 or 170 RPM

Power supply

three phase 220V +-10% 50Hz

Weight

85 Kg

Dimensions (cm)

60(W) x 80(L) x 90(H)

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E-FLY FLY WINDING MACHINE DESCRIPTION. This is a special machine for conducting coils used in alternators. As a single head, it produces one coil per cycle. This machine is built on a steel chassis welded and aluminium profiles. The wire guide system is placed on linear bearing guides, which ensures a precise guide control and great robustness.

KEY FEATURES -

Programmable aperture of “nose tooling”, using slip rings and servo motor Motor of wire guide Brushless servo motor Main motor Brushless servo motor with break Table positioning motor Brushless servo motor Protection Shield with pneumatic function controlled by program Specific software for this application. CE normative.

TECHNICAL CHARACTERISTICS Max Wire  (round) .......................................................................................................... 1,2mm Max winding length ........................................................................................................... 150 mm Max.  of winding ............................................................................................................ Main Motor, Brushless. (Medium Inertia) .......................................................................... Wire guide motor, Brushless ............................................................................................. Drive motors ...................................................................................................................... Max. Winding speed .......................................................................................................... Main controller ................................................................................................................... Software language (others available on request) ................................................................ Max. Programmable Pitch .................................................................................................. Spindle Accuracy ................................................................................................................ Guiding precision ................................................................................................................ Dimensions (approx)........................................................................................................... Weight approx. ...................................................................................................................

270 mm 6,36 Nm 2,2 Nm By 3 Hi-tech Servos (1500 r.p.m) CTE-240 English 9mm 1/10 0,01mm 1250 x 1050 x 1250 450 Kg

PROGRAMMING CHARACTERISTICS. Max. No. of programmable windings (Standard 50) ......................................................... Max. 175 Max. No. of windings per coil (Standard 20) .................................................................... Max. 200 Type of programming ........................................................................................................ CNC DELIVERY TIME ........................................................ 60 Days from order confirmation.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Bench Top Toroid winding Machine range


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 900 Toroid winding machine. Specification Program

TWC-01 digital controller holds up to 999 program sequences

Control

DC 400 W spindle motor with stepping motor for spreading

Features

Choice of Belt or Slider type winding heads both available in 4 or 6 inch versions

Package

Includes base, core rotator, winding head and your first shuttle

Wire size

0.05 – 1.1 mm (depending on machine head type and shuttle size)

O D Range

8 – 60 mm

Min finished I D 3 mm (depends on shuttle size & core height) Min wire size

depends on shuttle size and head type

Max speed

1500 rpm (depending on winding head)

Power

AC 230 /110 V ± 10%, 50 - 60hz

Dims

600 x 620 x 640 mm

Net weight

70 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


HEAD TYPE

B4 BELT TYPE

B6 BELT TYPE

S4 SLIDER TYPE

S6 SLIDER TYPE

PICTURE

COIL O.D.

5~60mm

8~60mm

8~60mm

8~60mm

MIN.FIN. I.D.

3mm

6mm

7mm

7mm

MAX. HEIGHT

25mm

45mm

25mm

45mm

WIRE SIZE

0.12~0.8mm

0.25~0.9mm

0.04~0.35mm

0.05~0.4mm

SHUTTLE DIA.

100mm

150mm

100mm

150mm

2.4, 2.5, 2.8, 3.4

4.7, 6.3, 7.9

4.7, 6.3, 7.9, 9.5

9.5,12.7, 15.6

SHUTTLE TYPE

4.7, 6.3, 7.9

4.7, 6.3, 7.9, 9.5

9.5,12.7, 15.6

Min. Finished I.D. Will be different by shuttle size and coil height.

SHUTTLE WIRE CAPACITY CHART (IN FEET) 1 FOOT = 304.8 mm FOR B4 & S4 TYPE SHUTTLE WIDTH

2.4 2.5

2.8

3.4

4.7

6.3

FOR B6 & S6 TYPE

7.9

9.5

13

23

4.7

7.9

9.5

12.7

19

35

58

18

24

43

72

11

22

30

53

89

12

27

38

65

111

0.912MM

AWG NO.19

0.813MM

AWG NO.20

3

5

12

16

28

8

0.724MM

AWG NO.21

4

7

14

20

35

0.643MM

AWG NO.22

5

8

18

25

43

0.574MM

AWG NO.23

0.511MM

AWG NO.24

0.455MM

AWG NO.25

0.404MM

AWG NO.26

0.361MM

6.3

15.6

4

6

10

22

30

54

15

33

46

81

138

207

4

5

8

13

27

38

67

20

41

57

101

170

255

4

5

7

10

16

34

48

84

24

51

71

125

211

316

5

6

8

12

20

42

59

104

30

63

87

153

216

324

AWG NO.27

6

7

10

15

24

52

73

128

36

78

108

191

324

486

0.320MM

AWG NO.28

7

9

12

18

30

65

90

159

45

98

134

236

400

600

0.287MM

AWG NO.29

10

11

15

23

38

80

113

198

56

120

167

293

496

744

0.254MM

AWG NO.30

12

14

19

28

47

100

140

245

69

150

206

363

613

919

0.226MM

AWG NO.31

14

18

24

35

58

123

173

304

86

186

255

450

759

1140

0.203MM

AWG NO.32

23

22

29

44

72

153

215

377

107

230

318

558

940

1410

0.180MM

AWG NO.33

28

27

36

54

89

190

267

468

132

284

393

690

1163

1745

0.160MM

AWG NO.34

35

33

45

67

110

235

330

579

165

354

487

854

1440

2160

0.142MM

AWG NO.35

41

56

83

136

292

410

719

204

438

602

1057 1782

2673

0.127MM

AWG NO.36

169

362

508

891

252

542

746

1309 2205

3300

0.114MM

AWG NO.37

209

449

630

1105

312

671

923

1620 2730

4000

0.102MM

AWG NO.38

260

556

781

1370

387

830

1142 2005

0.089MM

AWG NO.39

322

690

969

1700

479

1027

0.079MM

AWG NO.40

399

855

1200

2108

592

1272

0.064MM

AWG NO.41

495

1060

1490

2614

0.056MM

AWG NO.42

615

1315

1847

3240

0.051MM

AWG NO.43

763

1631

2290

4020

0.046MM

AWG NO.44

946

2022

COLOUR INDICATION

WHITE : FOR B4 TYPE YELLOW : FOR B4 & S4 TYPE GREEN: FOR S4 TYPE

WHITE : FOR B6 TYPE YELLOW : FOR B6 & S6 TYPE GREEN: FOR S6 TYPE


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 900A Toroid winding machine. Specification Program

TWC-01 digital controller holds up to 999 program sequences

Control

DC 400 W spindle motor with stepping motor for spreading

Features

Choice of Belt or Slider type winding heads both available in 8 or 12 inch versions

Package

Includes base, core rotator, winding head, your first shuttle, and comprehensive manual

Wire size

0.3 – 1.2 mm (depending on machine head type and shuttle size)

O D Range

40 – 200 mm

Min finished I D 12 mm (depends on shuttle size & core height) Min wire size

depends on shuttle size and head type

Max speed

1200 rpm (depending on winding head)

Power

AC 230 / 110 V ± 10%, 50 - 60hz

Dims

770 x 690 x 550 mm

Net weight

80 kg

CE cert. no.

AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


HEAD TYPE

B8 BELT TYPE

S8 SIDE SLIDER TYPE

PICTURE

COIL O.D.

40~120mm

40~120mm

MIN.FIN. I.D.

12mm

15mm

MAX. HEIGHT

80mm

80mm

0.3~1.1mm

0.3~0.8mm

220mm

220mm

WIRE SIZE SHUTTLE DIA.

SHUTTLE TYPE 8, 10, 12, 15, 17, 20 8, 10, 12, 15, 17, 20 * Finished ID will vary according to shuttle specification and coil height

SHUTTLE WIRE CAPACITY CHART (FEET) 1 FOOT = 304.8 mm FOR B8 & S8 TYPE SHUTTLE WIDTH

8

10

12

15

17

20

1.290MM

AWG NO.16

60

77

99

149

240

1.151MM

AWG NO.17

76

97

125

186

302

1.024MM

AWG NO.18

49

95

122

158

236

382

0.912MM

AWG NO.19

61

121

155

199

297

481

0.813MM

AWG NO.20

77

151

194

250

374

605

0.724MM

AWG NO.21

97

204

246

315

471

763

0.643MM

AWG NO.22

123

246

311

400

598

968

0.574MM

AWG NO.23

155

303

391

501

750

1214

0.511MM

AWG NO.24

194

383

492

633

946

1532

0.455MM

AWG NO.25

247

483

621

798

1193

1932

0.404MM

AWG NO.26

312

613

788

1013

1513

2451

0.361MM

AWG NO.27

393

768

986

1268

1895

3069

0.320MM

AWG NO.28

498

972

1256

1614

2411

3906


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 300 Toroid winding / taping machine. Specification Program

TWC-01 digital controller holds up to 999 program sequences

Control

DC 400 W spindle motor with stepping motor for spreading

Features

Choice of three Gear type winding heads & three taping heads, fully controllable spreading

Package

Includes base, core rotator, head and your first shuttle

Wire size

0.5 – 2.6 mm (depending on machine head type and shuttle size)

O D Range

40 – 250 mm

Min finished I D 25 mm (depends on shuttle size & core height) Min wire size

depends on shuttle size and head type

Max speed

250 rpm (depending on winding head)

Power

AC 230 /110 V ± 10%, 50 - 60hz

Dims

690 x 630 x 780 mm

Net weight

90 kg

CE cert. no. AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


HEAD TYPE

G10S WINDING G10B WINDING

G13 WINDING

T10S TAPING

T10B TAPING

T13 TAPING

PICTURE

COIL O.D.

40~150mm

60~150mm

80~250mm

40~150mm

60~150mm

80~250mm

MIN.FIN. I.D.

25mm

35mm

45mm

25mm

35mm

45mm

MAX. HEIGHT

80mm

80mm

120mm

80mm

80mm

120mm

WIRE SIZE

0.5~1.5mm

0.5~2.2mm

0.5~2.6mm

-

-

-

SHUTTLE DIA.

250mm

250mm

350mm

250mm

250mm

350mm

SHUTTLE TYPE

8, 12, 16, 20, 25

8, 12, 16, 20, 25

11, 14, 17 20, 23, 26

TAPE WIDTH 4~8mm

TAPE WIDTH 8~15mm

TAPE WIDTH 12~25mm

Min. Finished I.D. Will be different by shuttle size and coil height.

SHUTTLE WIRE CAPACITY CHART (FEET) 1 FOOT=304.8mm G10B SHUTTLE WIDTH

8

12

16

G10S 20

25

8

12

16

G13 20

25

11

14

17

20

23

25

3.000MM

AWG 09

50

71

93

114

136

158

2.590MM

AWG 10

68

95

124

153

182

211

2.300MM

AWG 11

17

34

51

68

88

86

122

158

194

231

267

2.050MM

AWG 12

21

42

63

84

109

107

153

199

245

291

337

1.830MM

AWG 13

27

54

81

108

140

134

192

249

307

365

422

1.630MM

AWG 14

34

68

102

136

177

19

38

57

76

99

169

242

314

387

460

532

1.450MM

AWG 15

42

84

126

168

218

24

48

72

96

125

214

306

398

490

581

672

1.290MM

AWG 16

53

106

156

212

276

31

62

93

124

161

270

386

502

618

734

850

1.151MM

AWG 17

67

134

201

268

348

39

78

117

156

203

339

485

631

777

922

1067

1.204MM

AWG 18

84

168

252

336

437

49

98

147

196

255

429

613

797

981

1165 1349

0.912MM

AWG 19

107 214

321

428

556

61

122

183

244

317

541

773

1004 1237 1469 1700

0.813MM

AWG 20

135 270

405

540

702

77

154

231

308

400

680

973

1265 1556 1848 2139

0.724MM

AWG 21

170 340

510

680

884

97

194

291

388

504

859

1227 1594 1962 2330 2698

0.643MM

AWG 22

220 440

660

880

1144 123

246

269

492

640

1088 1555 2021 2488 2954 3421

0.574MM

AWG 23

275 550

825

1100 1430 155

310

465

620

806

1366 1951 2536 3122 3707 4292

0.511MM

AWG 24

350 700 1050 1400 1820 195

390

585

780 1014 1724 2462 3200 3939 4677 5416


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 900 Toroid Taping machine. Specification Program

TWC-01 digital controller holds up to 999 program sequences

Control

DC 400 W spindle motor with stepping motor for spreading

Package

Includes base, core rotator, Taping head and your first shuttle

Tape Width

4 mm - 10 mm (depends on shuttle Width)

O D Range

8 â&#x20AC;&#x201C; 60 mm

Min finished I D 15 mm (depends on shuttle size & core height) 45mm Max. Height Shuttle Dia

150 mm

Max speed

300 rpm (depending on winding head)

Power

AC 230 /110 V Âą 10%, 50 - 60hz

Dims

780 x 780 x 1250 mm

Net weight

90 kg

CE cert. no.

AE9955093 01

.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 300 G7 Toroid winding machine. Specification Program

TWC-01 digital controller holds up to 999 program sequences

Control

DC 400 W spindle motor with stepping motor for spreading

Features

The Gear type winding heads was designed for winding small coil with precise winding requirement.

Package

Includes base, core rotator, head and your first shuttle

Wire size

0.5 â&#x20AC;&#x201C; 2.6 mm (depending on shuttle size) O D Range 28 - 80 mm Min finished I D 15 mm (depends on shuttle size & core height) Shuttle Dia. 175 mm Max speed

300 rpm

Power AC 230 /110 V Âą 10%, 50 - 60hz Dims 690 x 630 x 780 mm Net weight

85 kg

CE cert. no. AE9955093 01

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

WH 200 Hook winder. Specification Program

Digital controller capable of holding data for 999 winding operations, Fully programmable pitch per turn (wire spacing). Start position, winding direction and segment winding angle programmable. In semi-automatic mode, hold-time is programmable at top and bottom of stroke

Control

Pneumatically operated hook Mechanically adjustable stroke length Turns counted digitally Full control of core rotation using stepping motor

Package

Includes full height cabinet, digital controller and one hook Air cylinder, filter & regulator; stepper motor system

Hook sizes

3 standard hook sizes, with specials available

Wire size

0.3 ~ 2.2 mm

O.d. range

15 ~ 80 mm

Air supply

Typically 5 Bar

Power supply

AC 230 /110 V Âą 10%, 50 â&#x20AC;&#x201C; 60 Hz

Dimensions

70 x 55 x 150 cm

Hook data

Hook type Hook size Min. finished i.d.

H5 5 mm 8 mm

H8 8 mm 11 mm

H10 10 mm 14 mm

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Hook winder SKS "Pullwinder" Pneumatically driven needle hook Package

Bench mounting base and one hook, Air cylinder, filter & regulator with pneumatic foot pedal

Hook sizes 3 standard hook sizes, with specials available Wire Range

0,2 ~ 3.5 Ă&#x2DC; mm

Core OD Range

15 ~ 80 Ă&#x2DC; mm

Hook Sizes

3, 6, 8 & 10mm

Cylinder

Festo DNC-50-200-PPV

Air supply

Typically 5 Bar

Weight

45Kgs

Dimensions

70 x 55 x 150 cm

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Tape winder - "AIR JET" The Air jet is a rapid way to tape small Toroidal cores, giving machine wound repeatability and quality on every product run.

· Cutting length between 20-999mm · Tape width from 7mm upto 50mm Simple operation process… Place the core

Hold tape over top of toroid

The finished taped core

With the help of “Air Jet”, the tape will be pushed through the core, after that, we have to bring the tape over the top of the toroid to produce the wound tape turns...

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Winding Shop-floor Production Aids We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Coil Handling / Packing Trays. Damage, rework and scrap currently adds to manufacturing costs, making companies uncompetitive in World markets. Prevention is the key; maintain the conformance of each part by using good work handling practices. A range of standard containers available for protection of precision components. We can also create customised containers to protect even the most complex shapes and sizes. These are precision moulded to offer smart presentation and protection, especially ideal for transportation of coils. Made from High density EPS, these trays very light (55 Gramms / Litre) whilst still very strong means they can be used again and again and againâ&#x20AC;Ś Features and benefits include: EXCELLENT PROTECTION: Prevent accidental impact, Protection from contamination / oil, Thermal properties protect from extreme temperatures. Protection when shipped to and from subcontractors PRECISION MOULDED: Smart presentation and good part location PARTS SEGREGATION: Reduces transit damage and rework. upto 250 stock sizes / types available, however this method of tray production results in LOW tooling costs, meaning we can produce New designs to exactly match your product / assemblyâ&#x20AC;Ś Option available for foam lined base for use with PCB / Pin type bobbins. CONDUCT-A-PAK: Option for material to be static/electrical compliant STACKABILITY: Fitted lids are available to make trays stackable to minimise storage costs PRODUCT ENHANCEMENT: Can be made with embossed company logo for clear identification. Available in range of colours, either to support corporate identity or for product coding

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

E I lamination stacking machines. These machines stack standard EI laminations in a wide range of sizes, from EI-19 to EI-180 & UI & EE ranges. Other sizes are available; please contact us to discuss your requirements.

Laminations of 0.35 mm to 0.5 mm are stacked at up to 300 pieces per minute, manually or automatically, full interleaving.

thick with

Standard range, manual: EI-19 EI-43 EI-84

EI-24 EI-48 EI-85.8 EI-152.4 EI-162

EI-25.4 EI-54 EI-96 EI-6 3/8

EI-28 EI-57 EI-105 EI-171

EI-30 EI-60 EI-114 EI-180

EI-35 EI-66

EI-36 EI-66.7 EI-120

EI-38 EI-75

EI-41 EI-76.2 EI-133.2 EI-135

EI-42 EI-78 EI-150

EI-43 EI-114

EI-54

EI-57 EI-152.4

EI-60 EI-162

EI-66.7

EI-133.2

EI-4.5-3.75

EI-196

Standard range, automatic: EI-36 EI-76.2

EI-38 EI-85.8

EI-41 EI-96

EI-42 EI-105

EI-66 EI-196

Other sizes & OEM laminations available to order.

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Range of Wire Stripping machines We offer three types of enamel Wire removal systems, the choice between them mainly depends of wire size and application.

WH-S03 Wire Range (mm)

Features A fast and inexpensive method of wire stripping, Removal of enamel coating on copper wire with automatic dust collection In-feed length

1.7mm - how close the machine can strip from coil body

Tooling

Five blades to remove wire enamel

0.3 â&#x20AC;&#x201C; 5.0

Stripping

Single wire only

Dimensions (mm)

Product Picture

280L * 160W * 200H m m

(round)

WH-S02 Removal of enamel coating on copper wire with fine adjustability for small wire diameters Tooling

Max 0.3

Single wire only

230L * 160W * 195H

0.1 â&#x20AC;&#x201C; 8.0

Single & Litz wire

390L * 180W * 180H

Fiberglass wheel to remove wire enamel

WH-S01 To strip the wire, simply insert the end of the enamelled wire, turn by 90 degrees and then remove the stripped wire. There are 3 brush types available, each suited to a specific wire range.

P/N S01-0.06mm

S01-0.1mm

S01-0.2mm

Wire range Description Steel brushes with 0.06mm wire Set of two Steel brushes with 0.2mm - 0.3mm 0.1mm wire Set of two Steel brushes with > 0.3mm 0.2mm wire Set of two 0.1mm - 0.2mm

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

IWM-LD ELECTRONIC LABEL DISPENSER Specification & Features 

Ideal for small labels and small work areas

Will dispense labels and die-cut parts

Photosensor Accuracy and Reliability

Automatically removes paper, vinyl, acetate, polyester, foil, etc. from its liner

Automatically rewinds liner scrap for a cleaner working environment

Liner scrap is easily removed

No maintenance required

Adjustable strip plate for hard-torelease labels

High Torque Motor for large diameter label rolls

Label counter pcs

0 - 999999

Roll ID (min)

25mm

Roll OD (max)

250mm

Label Length

3 to 150mm

Label Width

4 to 140mm

Feed Speed

16 – 130 mm/Sec – adjustable via dial

Power supply110 / 220 / 240 VAC 50 / 60 Hz

Dimensions

210L x 210W x 220H

Weight

4.5 Kgs

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

IWM Taping Solutions Tape – cut to length machines Model

IWM1000

IWM025

IWM006

Characteristics

Cutting Length Tape Width Power Dimensions (mm) Net weight (kgs)

30mm to 999 mm 7mm to 50mm

12 to 60mm 40 mm to 999 mm 3mm to 25mm 15 mm to 80 mm AC 230 / 110 V ± 10%, 50 – 60 Hz

218 * 137 * 150

300 * 160 * 160

166 * 245 * 243

3.4

2.75

9.4

Tape – auto bobbin machines Model

TP-01

Automatic taping with bobbin change-over. Tape cutter Characteristics with start and finish wiper and automatic unload. Auto guard close start opertion. Typically 3 seconds per bobbin for 2 turns of tape, cut and Cycle time: auto unload. Dimensions (mm) 600 x 350 x 300 We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Ingrid West Machinery Ltd Unit 5L, Delta Drive, Tewkesbury, Glos. GL20 8HB, United Kingdom Tel. +44(0) 1684 273164 Fax. +44(0) 1684 273171

E-mail enquiry@ingridwest.co.uk Website www.coilwindingmachines.eu

Tensioner meters. Model No.

Range

Resolution

Tension Units

TX-125

0-125g

0.1 to 1g

cN, grams or lb

TX-1000

10-1000g

1 to 5g

N, grams or lb

TX-5000

50-5000g

5 to 10g

N, grams or lb

LX-250

2.5 -113 KG

0.22 KG

N, KG or lb

LX-500

11 - 225 KG

0.45 KG

N, KG or lb

Large, easy to read backlit, graphic display with adjustable backlighting and contrast. 

S - Speed and Length Option Indicate real-time speed in FPM, or MPM. Maximum measurable speed is 9,999 FPM or 9,999 meters per minute, however line speeds in excess of 2,000 FPM are generally unsafe for hand-held applications. Read length of part run in feet or meters. Maximum length measuring up to 9,999 meters or feet.

A - Analog Output Option Analog Output Option for both speed and tension values. 0-5 VDC or 4 20 mA with software-definable ending sequences. Provided with 10' cable. Data outputted at 40Hz.

E - RS-232 Serial Output Option Provided with 10' cable to interface with your receiving device. Select data sampling rate from 1, 2 or 5 Hz.

D - Data Logging Option Capture and view data within a user-defined time window. Select the time window; then select the sampling rate (from 1-100 Hz). After capturing the data, review the data on the instrument's display or upload it using the 10' serial interface cable. Order code:- [Model number] + [options] e.g. tx-1000–S–D

We aim to be much more than a machinery supplier. Our team has a vast range of winding experience and is able to offer help and advice on all aspects of coil winding, from tooling design to machine choice and set-up.

Ingrid West Machinery ~ Coil winding solutions you can rely on ~ Working with local partners in the following countries; Austria, Czech Republic, Germany, Hungary, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.


Our European Partners Austria

& Slovenia

Thomas Stummer

Hungary

Áron Alföldy-Boruss, Daróczi út 36. H- 1113 Budapest, Hungary Tel:+36 1 372 77 00 Fax: +36 1 372 77 09 Email: hungary@thonauer.net

Wien 23Bez, Perfektastraße 59, A-1230 Wien, Austria

Tel: +43 80 42 87 123 Fax: + 43 804 28 71 10 Email: t.stummer@thonauer.at

Czech Republic

Jiri Popelinsky, Cacovická 47, Brno CZ - 61400, Czech Republic Tel: +420 545243454 Fax: +420 545243408 Email: info@thonauer.cz

Slovakia

Peter Ziska, Cukrová 14, SK-81339 Bratislava, Slovakia Tel:+42 12 527 33 664 Fax:+42 12 527 33 665 Email: info@thonauer.sk

Germany

Poland

Paweł Domazer,

Christoph Klein,

Ul. Strazacka 63,63-400 Ostrów Wlkp Poland.

Römerstraße 6, 86922 Eresing, Germany Tel: +49(0)8193 5728, Fax: +49(0)8193 5735 E-mail: credo@credo-tech.de

Tel: +48 62 591 92 37 Fax: +48 62 738 14 93 Email: pd@aet.com.pl

Romania

Spain

& Portugal

Sergiu Czompi, Str Diligentei nr. 5, Bucuresti,031555

Str Argetoaia nr. 1, sector 2, Bucuresti POST CODE 024011, Romania Tel. +40 21 335 12 87 Fax. +40 21 336 95 34 E-mail sergiu.czompi@thonauer.ro

José María Mora, C/Puig Campana 23 Parcela 17 46960 ALDAIA - VALENCIA, Spain Tel: +34 963 328 152 Fax: +34 961 986 373 E-mail: mora@erasan.es

Ingrid West Machinery ~ Coil winding solutions you can rely on ~

Catalogue English 2014  

Ingrid West Machinery is a leading European distributor of coil winding machines, together with associated production aids and technology.

Read more
Read more
Similar to
Popular now
Just for you