Page 1

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

- All work is to be done in accordance with the SANS 10400 National building Regulations. - All materials and workmanship are to comply with the relevant SAN 10400 codes and or the specified international codes where applicable in the Architectural specifications. Where relevant South African National Standards, British Standards, BS codes of practice, or

A

06

D

9

S

N U

IT E

O B

GENERAL

B

E IT

O U

S

N D

A

1 07

R Y

DESCRIPTION

7

42 878 SITE BOUNDARY

KEY NOTE

7

Y R

recommendations and requirements of such documents to be considered a minimum standard for the works. - The contractor shall in all aspects of the works comply with the provisions of the Occupational Health and Safety Act, 1993 (Act No 85 of 1993) and any regulations promulgated in terms of that Act or the Factories Machinery and Building Works Act of 1941. - The contractor shall set up, document and maintain a quality assurance and quality control system, in accordance with SANS 9001/ISO 9001, able to be checked to the satisfaction of the Architect, that all materials and workmanship, whatever their sources, meet the requirements of the Specification. Should the Contractor or any of his sub-contractors be certified to the SANS 9000 family of standards then monitor these works accordingly. - This drawing must be read in conjunction with all the relevant drawings, schedules and specifications from B+P and all other consultants related to the project. information is to be done in accordance with the National Building Regulations. - This drawing is not to be scaled. Figured dimensions to be used. All dimensions are in millimeters unless otherwise stated. - All dimensions and levels must be checked on site by the contractor before putting work in hand. - All work to be executed by competent persons qualified for the specific trade.

57 814 SITE BOUNDARY

REV C

DATE XX-XX-2011

DRAWN BP.CT

DESCRIPTION COUNCIL

GENERAL NOTES: 1.

CONTRACTOR AND SUB-CONTRACTORS TO CHECK ALL LEVELS AND DIMENSIONS ON SITE BEFORE ANY WORK IS COMMENCED AND ANY DESCREPANCIESTO BE REPORTED TO THE ARCHITECT IMMEDIATELY. FIGURED DIMENSIONS TO BE TAKEN IN PREFERENCE TO SCALED MEASUREMENTS AND LARGE SCALE DETAILS SUPERCEDE SMALL SCALE DRAWINGS. ALL WORK TO BE DONE IN ACCORDANCE NATIONAL BUILDING REGULATIONS - SABS 0400 AND ALL REQUIREMENTS OF MUNICIPAL AND LOCAL AUTHORITIES CONCERNED ,TO BE ADHERED TO. NATURAL LIGHT AND VETILATION AREA OF ALL OPENINGS IN ACCORDANCE SABS 0400 PART O NATURAL LIGHT AREA : MIN.10% OF FLOOR AREA AND NATURAL VENTILATION : MIN.5% OF FLOOR AREA. ALL GLAZING TO COMPLY WITH REQUIREMENTS OF SABS 0137 - ACCESS DOORS AND SIDE LIGHTS TO HAVE SAFETY GLASS. ALL GLAZING GREATER THAN 1sqm TO BE SAFETY GLASS. GLAZING LOWER THAN 500mm FROM FLOOR, LOWER THAN 1800mm ABOVE PITCH LINE OF STAIRS AND SHOPFRONTS TO BE SAFETY GLASS. ALL EXCAVATIONS, FILLING AND COMPACTION FOR FOUNDATIONS AND STRUCTURAL WORK TO BE DONE IN ACCORDANCE WITH STRUCTURAL ENGINEER'S DRAWINGS. ALL CONCRETE WORK, MOVEMENT JOINTS, CONTROL JOINTS AND MASONARY REINFORCING TO BE DONE IN ACCORDANCE WITH STRUCTURAL ENGINEER'S DRAWINGS. ALL CAVITIES BELOW FLOOR LEVEL TO BE FILLED WITH CONCRETE AND DPC'S TO BE STEPPED.

2.

3.

4.

5.

6.

7.

DRAINAGE NOTES: 1.

3.

4. 5.

75 003 SITE BOUNDARY

6. 7.

NOTED.

COURT

FIRE NOTES: 1. 2.

PROVIDE 1X30m FHR FOR EVERY 500SQM. PROVIDE 1X4.5 DCP FIRE EXTINGUISHER FOR EVERY

3.

ALL FIRE EQUIPMENT & EMERGENCY EXITS TO BE CLEARLY MARKED IN ACCORDANCE WITH SABS 0400 SUBRULE TT29.

REVISION

COURT

27 403 SITE BOUNDARY

+ PARTNERS JOHANNESBURG Nicol Main Office Park , 4 Bruton Road/Bryanston Tel: (011) 790 1600 Fax: (011) 463 1197 PO Box 98665, Sloane Park/2125 mail@boogertmanjhb.co.za PRETORIA Tel: (012) 346 8686 Fax: (012) 346 8687 CAPE TOWN Tel: (021) 930 9210 Fax: (021) 930 9211 DURBAN Tel: (031) 265 1805 Fax: (031) 265 1811

PROPOSED ALTERATIONS FOR

BREAKERS AOG. ERF 4581 ( PORTION OF ERF 404 ) MELKBOSSTRAND

5 14 E

IT

S

CAPE TOWN

U

O

B

N

ROOF PLAN

Y

R A

D N

SCALE 1 : 3000 @ A0

16 672 SITE BOUNDARY

TITLE

14 26 193 SITE BOUNDARY

BOOGERTMAN

PROJECT

EXISTING PUMP STATION

27 182 SITE BOUNDARY

16 819 SITE BOUNDARY

PROJECT

PHASE

DISCIPLINE

BLOCK / SERIES / SUFFIX

REVISION

EDGE

1

AR

100

C

DRAWING STATUS

INFO

TENDER DRAWN BY:

CONSTRUCTION CHECKED BY:

Author

Checker

DATE:

SIGNED:

--/--/----

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

2.

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

ALL LEVELS TO BE CHECKED ON SITE AND FINAL ADJUSTMETS TO BE MADE IN ACCORDANCE WITH CIVIL ENGINEER'S INSTRUCTIONS. INSPECTION EYES ON ALL CORNERS AND CONNECTIONS. ALL PIPES IN WALLS COMPLETE WITH CLEANING AND RODDING EYES WITH INSPECTION AND REPAIR ACCES. VENTILATION PIPES 400mm ABOVE ROOF LEVEL. SEWER & STORMWATER PIPES BELOW BUILDING TO BE ENCASED IN MIN.100mm CONCRETE. MINIMUM FALL OF SEWER PIPES TO BE 1:60. FIT VENT VALVE ON ALL WASTE FITTINGS. WC & URINAL - 100mm DIA. SOIL PIPE. BATH & SHOWER -

ROOF PLAN - MELKBOSSTRAND EDGE CHURCH  

N ROOF PLAN S IT E EDGE PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUC...

Read more
Read more
Similar to
Popular now
Just for you