Page 1

FACILITIES 2011 FACILITYSPECS.COM

Revitt® Ready Content

Now Available in Porter’s BIM Library Library ry

AIA Continuing Education Courses Courses rs Earn CEUs in Gymnasium Design Desig gn

110214_facilitiesRD4.indd i

2/14/11 10:10 AM


Table of Contents OVERHEAD-SUPPORTED BASKETBALL BACKSTOPS. . . . . . . . . . .PAGES 1-4 GYMNASIUM CONTROL SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 5-6 BACKSTOP WINCHES & ACCESSORIES . . . . . . . . . . . . . . . . . . . . .PAGES 6-7 HEIGHT ADJUSTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 7 COLUMN & WALL-MOUNTED BACKSTOPS . . . . . . . . . . . . . . . . . . . PAGE 8-9 BACKBOARDS, GOALS & SAFETY PADDING . . . . . . . . . . . . PAGES 8, 10-12 DIVIDER CURTAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGES 13-16 THROWING & BATTING CAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGES 17-19 VOLLEYBALL SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGES 20-23 FLOOR SLEEVES & COVER PLATES . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 24 SAFPAD™ WALL PADDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGES 25-27

PORTER ATHLETIC PRODUCT SHOWROOM CHAMPAIGN, IL

THE MAT MOVER® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 28 1735 SERIES BASKETBALL PORTABLE . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 30

PRESS FORWARD REVIT R EVIT® R READY EADY C CONTENT ONTENT for fo or A Au Autodesk utoodesk deeskk® RRevit evvitt® SSoftware oftwar of tw warre Look Lo ook ffor orr R o Revit ev viitt® R Ready eady ea ady yp products rodu ro duct du ctts thro th throughout hroug ugho ugho ug out u the catalog and access content at: th he c ca ata alo log a an nd ac acce cce esss tthe he e llatest attes st c co ont n en nt at t:

PORTERATHLETIC.COM/REVITREADY PORT RTER RT ERAT A HLETIC.COM/REVITREADY

In 2010, Porter PRESSED FORWARD with new products and product improvements that reinforce our leadership position in the athletic facilities market. Porter presents an unmatched ability to support our partners and customers with ever higher levels of service and new product development. Porter introduces a fantastic new REVIT® READY BIM LIBRARY featuring state of the art resources to the architectural, engineering, and construction communities. These new models enable designers to integrate Porter equipment and specifications into their working plans, allowing for greater accuracy and detail. Download Porter parametric families at www.porterathletic.com/revitready. Porter announces a newly expanded 25 YEAR WARRANTY on backstop frames and selected components. This updated warranty is indicative of the quality and outstanding service Porter customers have experienced for the last 100 years and provides customers confidence that they have selected the finest equipment available. Porter is a NEWLY REGISTERED AIA PROVIDER and offers a compelling program on Gymnasium Design. Visit WWW.PORTERATHLETIC.COM/AIA to learn more and request a presentation. Our onsite program allows your team to improve their understanding of important design considerations, equipment selection criteria and features, and control system evaluation for athletic facility projects while earning CEU’s.

AUTODESK AND REVIT ARE REGISTERED TRADEMARKS OF AUTODESK, INC., AND/OR ITS SUBSIDIARIES AND/OR AFFILIATES IN THE USA AND/ OR OTHER COUNTRIES.

110214_facilitiesRD4.indd ii

Porter is committed to serving our customers at an INDUSTRY LEADING LEVEL. Our investment in state of the art manufacturing facility and processes, and our technical team of architects, engineers and support representatives reinforce this assurance. We serve our customers by providing athletic facility equipment solutions that will provide decades of satisfaction.

2/14/11 10:10 AM


900 SERIES BASKETBALL BACKSTOP

1

ADDISON TRAIL HS, ADDISON, IL WIGHT & COMPANY (ARCHITECT) 917 BACKSTOP

REVIT® READY CONTENT for Autodesk® Revit® Software

Versatility. Performance. Value. The NO. 900 SERIES BACKSTOPS WITH PORTER’S CENTER-STRUT® feature provide the athletic facility designer with the widest variety of product applications while conforming to the latest regulations for championship competition. The clean, all-welded, single-mast drop frame with 6-5/8” diameter vertical support tube and heavy diagonal sway-bracing offers exceptional quality, design and rigid construction. Porter’s unique design offers unsurpassed functional stability and safety along with appealing aesthetics. The Center-Strut® transfers any stress applied to the goal through the backboard and to the backstop support. We are so confident of our Center-Strut® design that we back it up with a Limited Lifetime warranty against breakage of any Porter backboard. This is value we are sure you will appreciate for many years of championship play.

FIBA STUDY CENTRE PARTNER

Center-Strut® Feature Complies with the latest NCAA Rules Supplement (BR-24 Section 9), NFHS and FIBA recommendations for competition.

Center-Strut® mounts directly to the 6-5/8” diameter vertical drop frame support.

The glass backboard mounts to Center-Strut® goal support with two independent bolts to provide Porter’s exclusive backboard/goal mounting system.

Custom Banners

25 YEAR LIMITED WARRANTY ON 900 SERIES STRUCTURES

A flat black finish is standard on all custom Porter basketball equipment. An optional powder coat finish is available in 15 colors at no extra charge.

NAVY BLUE

ORANGE

ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN YELLOW GOLD OLD GOLD

RED

MAROON

PURPLE

WHITE

BLACK

GRAY

Goal mounts independently with four bolts extending through the backboard and into the Center-Strut® mounting plate to eliminate any stress on the backboard.

Give your athletic facility a hometown advantage with custom backstop banners! Banners are trimmed to size and provided with hook and loop attachment strips for easy installation on Porter’s 900 series backstops. Vector graphics must be supplied.

SILVER

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 1

2/14/11 10:10 AM


2

900 SERIES BACKSTOP FEATURES

REVIT® READY CONTENT

Height Configurations

Porter 900 Series Ceiling Suspended Backstops are backed by a 25 year limited warranty. This warranty protects against defects in material or factory workmanship of the backstop structure.

®

for Autodesk Revit® Software

Exceptional Stability

All 900 Series models are built with PORTER’S CENTER-STRUT® frame. However, backstops are not one size fits all; increased bracing and support components allow the stability and performance to maintain rigidity at any height range required.

FULLY WELDED STRUCTURE

FULLY WELDED STRUCTURE

900 SERIES

900 SERIES

900W SERIES

Up to 28’ Attachment Heights

28’–32’ Attachment Heights

Over 32’ Attachment Heights

All-welded, single-mast drop frame with unitized diagonal sway bracing offers exceptional quality, clean design and rigid construction. The 1-1/2” x 2-1/2” rectangular diagonal bracing and 6-5/8” dia. main support are welded to the 4” structural channel on the top of the frame.

All-welded, single-mast drop frame with unitized diagonal sway bracing as used on heights up to 28’ incorporates three adjustable support hangers and added integral support sway brace struts to maximize lateral stability and overall rigidity for heights over 28’ and up to 32’.

Due to its overall size requirements, the No. 900W series drop frame is designed as a bolttogether unit with additional internal bracing to provide unequaled stability, ease of transportation and access through gymnasium doorways. Frame incorporates three adjustable support hangers.

Folding Configurations

#955 SIDE BRACED

SIDE FOLD

#918 STATIONARY

#923 BACKWARD FOLD

#926 WALL BRACED

#951 REAR BRACED

#917 REAR BRACED

FORWARD FOLD

#952

REAR BRACED TRAK-FOLD

#949 REAR BRACED

FRONT BRACED

CAMBERED REAR BRACED

#950 CAMBERED FRONT BRACED

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 2

2/14/11 10:11 AM


900 SERIES BACKSTOP FEATURES

Structural Components

3

FEATURED ON NO. 900 SERIES BACKSTOPS

LOAD SAFETY FACTOR 50 TO 1*

OFFSET HINGE WEIGHT LOCK SYSTEM

ADJUSTABLE HINGE

STRUCTURAL CHANNEL SUPPORT

Support frames are designed with a 1-1/2” offset to utilize the weight of the structure to firmly and automatically lock the backstop brace system in a rigid playing position. This simple weight locking feature maximizes stability, yet does not rely on mechanical locks or latches.

Roof framing structures are not always perfect! An exclusive adjustable hanger system is standard on all of Porter’s 900 style backstops. This system allows for precise leveling of the backboard support frame to insure that the backboard is on a horizontal plane with the playing surface on every installation. Adjustable support hangers also provide for easy installation and precise plumbing of backstop frame assuring proper operation and performance. Accurate adjustability allows the installer to account for even the slightest attachment height difference (up to 1-1/2” total) without compromising attachment integrity. Three adjustable hangers are provided on installations when the attachment height is above 28’.

The No. 900 series provides outstanding rigidity by incorporating a heavy 4” structural steel channel as the critical top spreader support. The 6-5/8” diameter drop tube and 2-1/2” x 1-1/2” sway braces are secured to the horizontal support channel with full surface contact welds. This unitized frame won’t flex or loosen after years of use.

FULLY WELDED FRAME Fully welded frame on the 900 Series provides maximum stability and strength on frames up to 32’. The 2-1/2” x 1-1/2” rectangular steel tube sway bracing is precision cut at an acute angle to provide an exact, back-to-back triangulated design with maximum weld surface contact closer to the bank for unequaled rigidity.

Each hanger tests to 20,000 lb. maximum breaking strength and is designed with 5/8” diameter u-bolt support, 3/16” thick formed, die-cut saddle clamp, 3/4” diameter adjustment stud for precise leveling of mast support system and 1/2” diameter shoulder (hinge) bolts of polished, alloy steel, heat treated to a rockwell hardness of C32-43.

* All adjustable hangers, pulleys and support hardware are designed with a minimum 13.5 to 1 load safety factor. For independent test results contact Porter.

Structural Components

FEATURED ON ALL PORTER BACKSTOPS

LOAD SAFETY FACTOR 60 TO 1*

SWIVEL PULLEY-LOAD SAFETY FACTOR 13.5 TO 1* EYE PIPE CLAMP-LOAD SAFETY FACTOR 25.5 TO 1*

GIRDER CLAMP ATTACHMENT

SWIVEL PULLEY AND 3” EYE PIPE CLAMP

FOLDING BRACE HINGE

Girder clamp attachment for 3-1/2” diameter custom support structure is load tested to over 10,700 lbs. Dual, 1/2” diameter u-bolts support die-cut/formed steel girder clamps. This unique design even allows clearance for conduit under structural member.

Hoist pulley is a ductile iron casting with maintenance free, oil impregnated bronze bushing and 1 /2” diameter forged swivel eye with a 9,500 lb. ultimate breaking strength. Cable is 1/4” galvanized aircraft quality with 7,000 lb. ultimate breaking strength.

All units with folding brace are furnished with unique hinge assembly incorporating alloy steel investment castings with in-line pivot points and integral torsion spring to maximize backstop stability. PATENT NO. 6,511,391

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 3

2/14/11 10:11 AM


4

OVERHEAD BASKETBALL BACKSTOP SYSTEMS

More Overhead Backstop Configurations

NO. 951 TRAK-FOLD® CENTER-STRUT® BACKSTOP Compact Style Provides Maximum Clearance The Trak-Fold® rear-folding backstop is designed to provide maximum clearance over the main court playing area, leaving volleyball and badminton courts virtually free of overhead obstructions. The TrakFold® is designed for attachment heights from 18’ to 32’ and can fold backward in a compact space which would not accommodate a traditional rear-fold backstop. Backstop superstructure is supported by fittings that have been tested as capable of supporting a load exceeding 10,000 lbs. with a 60:1 safety factor. The carrier/hanger assembly fully encompasses the track system for a structurally sound and safe attachment. Porter’s proven Center-Strut® construction eliminates the occurrence of shattered glass backboards by putting stress from crushing slam-dunks on the mast and superstructure, not on the backboard. V-guide with two-wheel carriers provides a unique tracking system, which allows the adjustable hinge mast supports to move forward as the backboard folds compactly against the wall. The sloped track weight-locks the backstop in the down position making the entire system completely rigid while in play. Includes all of Porter’s proven, high quality components including Center-Strut® vertical drop frame, 6-5/8” O.D. heavy wall structural steel, back brace assembly with folding knee joint, adjustable hangers and electric operation. Available with optional Powr-Touch® or Sportsonic® II operating systems shown on pages 6-7.

NO. 600 & 1400 CLEAR-VU SERIES

NO. 500 UNI-FRAME SERIES

For Rectangular Glass or Wood Backboards

For Rectangular Fiberglass or Fan-Shaped Backboards

Clean, unobstructed views are a bonus for players and spectators alike with Porter’s Clear-Vu series rectangular backboards and backstops. The ClearVu series is available in three distinct styles to meet most design applications. Attachment height will determine proper style. Each model incorporates our Uni-Frame design features to assure maximum stability, championship performance and architectural appeal. Rigidly built frame incorporates special offset backboard extension assemblies to position the 5’ 9” on-center vertical supports directly behind the vertical perimeter markings on any rectangular glass backboard for a Clear-Vu through the glass. Porter‘s Clear-Vu series backstops are designed for use with rectangular backboards and may be specified with either a 204 glass or 228 wood rectangular backboard shown on page 10 & 11. Clear-Vu backstops are available in any folding or stationary style with manual or remotecontrolled electric operation.

This series is available in all popular folding or stationary designs. Uni-Frame construction employs a clean, fully welded backstop design. Vertical members are fabricated of 2-3/8” O.D. pipe. Horizontal spreaders of 2-3/8” O.D. pipe are positioned on approximately 3’ centers for full weld strength and maximum structural rigidity. The Uni-Frame is designed with 2’ 11” vertical support members and will accommodate either the 216 rectangular fiberglass or any fan-shaped backboard shown on page 11. Specify 1400W series for all attachment heights above 28’. Specify 600W/ 500W series for all attachment heights from 25’ to 28’. Specify 600 / 500 series for all attachment heights below 25’. PATENT NO. 5,207,419

Installation Options All 500, 600 and 1400 series backstops are available in forward fold, backward fold and stationary style units. Optional Center-Strut® height adjustment systems are available on all backstops. See page 7.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 4

2/14/11 10:11 AM


POWR-TOUCH ® LCD ™ GYMNASIUM CONTROL CENTER

5

POWR-

Touch

with LCD Screen Display Coordinate your entire facility with Powr-Touch® for the ultimate experience in gymnasium control.

Reduce Gymnasium Design Costs POWR-TOUCH TOTAL GYMNASIUM CONTROL CENTERS offer you dramatically better control over the athletic equipment in your gymnasium and provide substantial savings over traditional key switch operations. ®

Powr-Touch® Total Gymnasium Control Centers are the most innovative, safest, and most efficient way to control gym equipment. Our state-of-the-art LCD system (or Powr-Touch 2.5 keypad) enables you to operate multiple devices including: basketball backstops, divider curtains, electric height adjusters, overhead volleyball systems, batting cages, and mat movers, while controlling power to other auxiliary equipment such as lighting and scoreboards. All with a single touch! The Powr-Touch LCD pushes the limit of the Powr-Touch line providing a new level of gymnasium control. The LCD screen displays a graphical overhead gymnasium layout with intuitive controls. Each piece of equipment can be toggled to move up, down or hold its position. Then move all the equipment at the same time with the touch of one button. Move as much equipment simultaneously as your power grid will allow. The Powr-Touch LCD includes a message board, programmable auto logout timer display, and is programmable for future additions and updates. Multilevel password protection allows administrators to set separate security access codes for administrators and users. Users can operate equipment without having access to sensitive security and administrative areas like the message board.

Coordinate Your Entire Facility Contact your Porter Dealer for specification information and help bring this important cost and safety improvement to your facility.

SEE ALSO: POWR-TOUCH® 2.5 Page 6 Raise and lower gymnasium equipment via keypad entry and a custom equipment legend.

WORKS WITH: CENTER-STRUT® HEIGHT ADJUSTER Page 7 Electrically raises or lowers the goal height, available on any of your choice of Porter backstops.

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 5

2/14/11 10:11 AM


6

GYMNASIUM CONTROL SYSTEMS

NO. 706, 707, 806 ELECTRIC WINCHES

POWR-TOUCH® 2.5 When multiple control panels are installed, the Powr-Touch® 2.5 enables you to raise and lower up to 4 backstops and height adjusters simultaneously from any installed TouchPad in your gym. When multiple TouchPads and control panels are installed, you have the ability to operate equipment from different TouchPads simultaneously. Custom equipment legends are provided for each TouchPad location. A four-digit programmable security code allows access to authorized individuals only. The code can easily be reprogrammed as needed to prevent unauthorized use. Specify multiple TouchPads when equipment operations from various locations within the gym are required. Control circuit relay panels (14” x 17”) may be strategically located on walls or roof framing structure to minimize the need of power conduit.

Convenient raising and lowering of basketball backstops with Porter’s key switch, Powr-Touch® or Sportsonic® II wireless control systems. The 1/2 H.P. and 3/4 H.P. motors are capacitor type with automatic thermal overload protection manufactured to Porter’s well established requirements for quality and safety. Integral up and down limit switches provide automatic operating safety limits. High-strength forged bronze alloy worm gear and tempered-steel worm gear with precision ball bearings operate in a sealed oil bath providing exceptional durability and maintenance-free operation. Gear housing and grooved cable drum are machined from high-strength ductile iron castings for maximum dependability.

NO. 700 MANUAL WINCH Compact winch with precisionmachined, hardened steel worm, forged bronze worm wheel and thrust ball bearing provides smooth, quiet operation and holds backstop in any position. Input shaft is positioned flush with cover for added safety and is 3/4’’ square for use with detachable, socket-type handle or with optional No. 269 portable electric winch operator.

NO. 269 PORTABLE ELECTRIC WINCH OPERATOR Compact, heavy-duty unit to operate Porter’s No. 700 wall-mounted manual winch or any winch with a 3 /4’’ square drive shaft. Power and torque of unit is sufficient to handle all types of folding backstops and overhead volleyball up to a 25’ attachment height. Double insulated with 50’ power cord and two-prong plug. No grounding required. Complete with a durable storage case.

LEGEND SINGLE

DUAL

MULTI

BACKSTOP No.

03

03

MISCELLANEOUS No.

(HEIGHT ADJUSTERS)

ALL EQUIPMENT MAY BE OPERATED INDEPENDENTLY, PER THE EQUIPMENT NUMBER DESIGNATION.

51

52

51

52

05

05

TOUCHPAD CODES - MULTIPLE OPERATION DUAL OPERATION

50 OPERATES

01 02

01 02

01

51 OPERATES

03 04

51 OPERATES

03 04

01

52 OPERATES

05 06

52 OPERATES

05 06

50 OPERATES

02 50

02

50

NO. 12005 AUDIBLE MOTION ALARM

MULTI OPERATION

60 OPERATES

03 04 05 06

60 OPERATES

03 04 05 06

WARNING

BEFORE OPERATING THE EQUIPMENT, CLEAR THE FLOOR AREA AROUND AND BENEATH THE EQUIPMENT AS PERSONAL INJURIES ARE POSSIBLE DUE TO ENTRAPMENT OR EQUIPMENT FAILURE. HEIGHT ADJUSTERS MUST BE IN THE RAISED POSITION BEFORE RAISING OR LOWERING BACKSTOPS.

04

06

04 60

06

60 GYM 1

PATENT PENDING

WESTERN HILLS / DAETER HIGH SCHOOL CINCINNATI, OH ©2009 PORTER ATHLETIC EQUIPMENT CO. 111609-405690-1X 12/07/2010

www.porterathletic.com 888-277-7778

Every Powr-Touch® 2.5 control system comes with Porter’s Custom Equipment Legend. The Wall-mounted Equipment Legend allows the user to identify each piece of equipment and its corresponding number on the control system.

Designed for use on backstops, divider curtains, batting cages and overhead volleyball systems to increase awareness of equipment operation in the gymnasium. The alarm generates an intermittent pulse audible tone to warn athletes when the overhead electrical equipment is being operated. The alarm is compatible with all Porter electrically operated equipment with no additional field wiring and may be controlled by key switch, Sportsonic® II remote control and the Powr-Touch® control systems.

TO LEARN MORE— WWW.PORTERATHLETIC.COM/AIA

NO. 791 KEY SWITCH CONTROL SYSTEM FOR ELECTRIC WINCHES This control system is supplied as standard with all Porter backstops operated by an electric winch. Separate up & down keys provide for the safest equipment operation. For added protection against accidental or unauthorized raising or lowering of the backstop, overhead volleyball and curtains, the momentary key switch features two keys (up and down) to prevent instantaneous reversing of the winch and overriding the limit switches. Standard 4-1/2” square flush mounting features a stainless steel cover plate. Available one or two winch operation per switch.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 6

2/14/11 10:11 AM


BASKETBALL BACKSTOP ACCESSORIES

NO. 2002 SPORTSONIC® II WIRELESS CONTROL SYSTEM FOR ELECTRIC WINCHES Sportsonic® II is a wireless control system designed to operate electric winch units without conventional wall-mounted key switches. Sportsonic® II eliminates the need for costly wiring, conduit and electrical boxes between the basketball backstop, electrically operated height adjuster, overhead volleyball system or gym divider winch motor and the key switch location. The only wiring necessary is the standard power requirement for the electric winch unit.

7

NO. 902 POWR STICK Provide economical electric operation of height adjusters without expensive wiring costs. A great tool for converting existing manual systems to electric when rewiring an existing gym is not an alternative.

CENTER-STRUT® HEIGHT ADJUSTER FULL LENGTH

The Porter Sportsonic® II system will save substantial costs on the contractor’s electrical wiring in the gymnasium and also provide the facility personnel with the very latest in remote control system technology. Sportsonic® II must be specified as an option.

Porter’s exclusive Center-Strut® height adjuster is available on the backstop selection of your choice, along with the option to choose either manual or electric operation. There’s added value in any combination you choose with Porter’s Limited Lifetime Warranty offered on all Porter backboards installed with a Center-Strut® height adjuster. The Center-Strut® feature allows all goal mounting bolts to pass through the backboard and into a heavy steel mounting plate on the height adjustment frame eliminating any strain on the backboard. The goal height is easily adjustable to any height from 8’ to 10’ to accommodate all age levels, and height settings are clearly visible from the floor for accurate adjustments. PATENT NO.’S 5,279,496, 5,462,269, 6,537,162 B1 AND 6,056,654

HEIGHT ADJUSTERS WITH OPTIONAL ELECTRIC CONTROL SYSTEMS Electrically raises or lowers the goal height using a compact 115 volt, gear motor type linear actuator with 600 pound thrust capacity. Integral limit switches provide automatic shut-off at 8’ and 10’ goal heights. NO. 901 ELECTRIC HEIGHT ADJUSTER WITH KEY SWITCH OPERATION NO. 902 ELECTRIC HEIGHT ADJUSTER WITH POWR STICK OPERATION NO. 903 ELECTRIC HEIGHT ADJUSTER WITH SPORTSONIC® II OPERATION NO. 904 ELECTRIC HEIGHT ADJUSTER WITH POWR-TOUCH® OPERATION

NO. 797 SAF-STRAP BASKETBALL BACKSTOP SAFETY LOCK

NO. 799 RETRACTOR REEL FOR SAF-STRAP AND HOIST CABLE

Recommended for use by the latest NCAA Rules Supplement on Court and Equipment, page 23, Section 6. Saf-Strap provides added protection against possibility of a folding backstop or overhead volleyball system accidentally falling during the raising or lowering cycle or while in storage. The unique, centrifugal lock mechanism is not affected by impact of basketballs, etc., common with other similar type units. Saf-Strap offers a solid dimension in gymnasium safety planning and is recommended particularly for overhead supported or up-folding wall-mount backstops over bleachers.

For use with No. 917 backstops to automatically retract both the hoist cable and the strap of the No. 797 Saf-Strap from the area of play when the backstop is in the down position. Pulley housing mounts at upper end of backstop drop frame, with ballast actuator concealed inside drop frame.

MANUAL HEIGHT ADJUSTER Standard adjustment mechanism provided is an awning crank extension handle. Integral lock mechanism prevents goal height changes during the most rugged game conditions. Lock mechanism is automatically disengaged by the removable crank when adjusting goal height.

NO. 900-259 PORTABLE DRILL OPERATION For Manual Height Adjusters The portable drill kit consists of a heavy-duty, high torque, low R.P.M. drill with an extension socket adapter for ease of operating our manual height adjustment units from the floor. Unit is equipped with a safety-type clutch feature and is provided with two battery packs, charger and carrying case. (Not shown)

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 7

2/14/11 10:11 AM


8

WALL-MOUNTED BASKETBALL BACKSTOP SYSTEMS

Wall-Mounted Backstops Wall mounted backstops come in a variety of configurations and extensions to fit your particular gymnasium. Contact your Porter dealer for upgrades for any of the listed packages.

Safety First When using wall-mounted or overhead supported backstops near walls or other obstructions, wall padding is recommended behind units for maximum safety. PORTER’S SAF-PADS® meet and exceed industry standards to give you peace of mind when constructing a safe playing space. NO. 565 SERIES 2” SMART SAFPAD™ Page 26 An affordable option for facilities where a fire rating is needed. 100% recycled foam made from rapidly renewable resources.

NO. 420 SIDE-FOLDING WALL MOUNTED BACKSTOP Leave it to Porter to improve upon an age old design! The new 420 Side Fold Series from Porter takes the guesswork out of creating a strong, yet easy folding wall mount by providing a fully welded unit that installs quickly and easily and is quickly adapted to uneven walls. These backstops are available in several popular extensions and your choice of standard goal and fan fiberglass, rectangular fiberglass, rectangular wood or rectangular glass board.

NO. 355-0XX CORNER PAD porterathletic.com/ Product.aspx?ID=642 Fabricated with 2” rebonded foam for max protection on any outside corner. Pad is 6’ high and 6” wide in each direction.

NO. 356-0XX “I” BEAM PAD porterathletic.com/ Product.aspx?ID=643 A convenient and safe way to cover exposed columns that may be intruding into usable gym space. Slips over 6” to 8” wide “I” beam.

NO. 903500 SERIES 3-SIDED COLUMN AND CORNER PAD porterathletic.com/ Product.aspx?ID=644 Custom pads offer a neat, tailored look that can be installed in a fraction of the time.

NO. 312 STATIONARY BACKSTOP WITH CENTER-STRUT® Simple, rigid diagonally braced design supports backboard at any extension from 6” to 12’ from the wall. Porter’s CenterStrut® backstops are designed with a direct-mount system which provides a structural mounting support plate directly behind the goal. This exclusive feature eliminates any strain on the backboard during aggressive play. Backstop may be specified with any fan or rectangular backboard. This style backstop is also available with the Center-Strut® height adjuster.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 8

2/14/11 10:11 AM


WALL-MOUNTED BASKETBALL BACKSTOP SYSTEMS

NO. 219 UP-FOLDING RETRACTABLE BACKSTOP

BOOM STYLE BACKSTOPS Stationary Style or Up-folding Style

Backstop folds up with hoisting winch for compact storage of both framework and backboard. Special offset hinge fitting arrangement allows backstop to fold nearly flat against a wall.

Porter’s boom style backstop is custom fabricated to fit the unique parameters of each facility. It is available in either a stationary or fold-up style and designed to operate with either manual or electric operation. Fully-welded, structural tubing side frames provide exceptional quality, design and rigid construction. This custom design is ideal for a balcony or running track type installation.

Backstop extension is available in any dimension from 5’ to 12’ from the wall. Ceiling clearance needed for the up-fold dimension equals length of extension plus 13’. This style backstop is also available with the CenterStrut® height adjuster.

9

Backstop may be specified with any fan or rectangular backboard. For electric operation, choose from any of Porter’s control systems (see pages 6-7).

NO. 220 SIDE-FOLDING RETRACTABLE BACKSTOP

COLUMN-MOUNT BACKSTOPS

Backstop folds to side for economical, compact storage. This style is recommended where low ceiling height or obstructions prohibit other folding methods.

Designed to mount a fan-shaped backboard and goal to exposed flange of straight column or sloped rigid frame. No. 310 is for a fixed goal height; No. 311 includes Center-Strut® manually operated height adjustment system.

Backstop is operational from the floor with a telescoping diagonal brace system with a special locking mechanism. Offset hinge fitting allows backstop to fold nearly flat against a wall. Extension is available in any dimension from 5’ to 12’ from the wall. For folded space requirement add 2’ 6” for rectangular board and 1’ 6” for fan-shaped board to extension from wall. This style backstop is also available with the Center-Strut® height adjuster.

Backboard extends approximately 10” (No. 310) or 12” (No. 311) from face of column. Specify fan backboard and goal separately.

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 9

2/14/11 10:11 AM


10

BASKETBALL BACKBOARDS AND ACCESSORIES

LIMITED LIFETIME WARRANTY

NO. 00208-000 CENTER-STRUT® MOUNT RECTANGULAR GLASS BACKBOARD

FIBA The ultimate backboard for use on all Center-Strut® STUDY CENTRE support structures. Official size, 72” x 42” x 1/2”, PARTNER rectangular fully tempered plate glass backboard is designed for use with three point support attachments as featured on all Porter portables, or No. 900 Center-Strut® overhead supported units. The heavy steel goal-mounting plate on the backside of the unitized frame is equipped with independent attachment bolts so that the four goal-mounting bolts may be completely removed if necessary without affecting the support or plumb of the backboard. Front and sides of backboard are furnished in a durable brushed aluminum extrusion. Official markings are ”fired“ into the glass. See page 11 for safety padding.

LIMITED LIFETIME WARRANTY

NO. 00208-0L1 208 BACKBOARD WITH LED LIGHTS Official 00208-000 glass backboard with factory FIBA installed perimeter lights mounted to the backside of CENTRE the backboard. Complies with the latest NBA, NCAA, STUDY PARTNER and FIBA recommendations. Also meets NFHS End of Period Light requirements. LED system is neatly contained within a custom aluminum extrusion and mounted directly inside the perimeter backboard markings to provide a clean, uncluttered appearance to the system. The perimeter LED light system has its own console. LED synchronizers (sold separately) connect the lights to the shot clocks and scoreboards. See page 11 for safety padding.

LIMITED LIFETIME WARRANTY

NO. 00204-000 PRO STRUT® RECTANGULAR GLASS BACKBOARD Official size 72” x 42” x 1/2” rectangular fully tempered plate glass backboard furnished with a unitized steel frame incorporating a pro-style Center-Strut®. Goal mounting support and four corner attachment plates allow for installation on wall mount units, double drop overhead supported units or as a replacement backboard on old style support systems. Front and sides are furnished in a durable brushed aluminum extrusion. Official markings are “fired” into the glass. See page 11 for safety padding.

NO. 821208 & 821204 PERIMETER LIGHTS

NO. 8212081 LED SYNCHRONIZER

Add LED perimeter lights to 208 or 204 backboards. The set is for one backboard and comes in sections to be installed just inside the perimeter markings. Lights are contained within a custom aluminum extrusion and attached to the backboard with industrial strength adhesive tape.

The LED synchronizer connects the LED lights to shot clocks, scoreboards and power supplies. One synchronizer is required for each connecting device. For example, to connect the LED lights to both the shot clock and scoreboard would require 2 synchronizers for each set of lights.

PRO-STRUT® GOAL MOUNTING FEATURE

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 10

2/14/11 10:11 AM


BASKETBALL BACKBOARDS

10-YEAR LIMITED WARRANTY

NO. 00216-000 RECTANGULAR FIBERGLASS BACKBOARD Official size 72” x 42” x 2” backboard is molded from high-tensile strength SMC fiberglass and designed with the same CenterStrut® direct goal-mount feature as Porter’s glass backboards. Mold-in threaded (3/8-16) inserts on fan backboard mounting centers are standard for ease of mounting on any standard support structure. Strategically placed 2” deep reinforcing ribs and heavy perimeter flange provides excellent rebound qualities. Plated steel reinforcing plate in center of goal mount area provides unequalled strength and durability. Two additional holes are provided for independent mounting of backboard to a Center-Strut® support system for ease of installation and goal replacement. Specify No. 00227 Adhesive or No. 00326 Pro-Pad® bolt-on backboard safety padding.

11

LIMITED LIFETIME WARRANTY

NO. 00234-300 FAN ALUMINUM BACKBOARD Official size 54” x 39” die cast aluminum with continuous reinforcing ribs on backside make this our most durable fanshaped backboard. Perimeter flange and ribs at critical goalmounting area are a full 1-1/2” thick for maximum strength. White powder-coat finish with official orange perimeter and target markings. PATENT NO. 5,207,419

Back of No. 00234-300 reinforced rib

3-YEAR WARRANTY

NO. 326 PRO PAD® BOLT-ON BACKBOARD PADDING

NO. 00228-300 RECTANGULAR WOOD BACKBOARD

This extremely durable pad is manufactured with a tough molded urethane skin that is painted in the mold with a color matched urethane paint to provide the exterior with uniform colored appearance. Meets all competition requirements of the NBA, NCAA, NFHS and International requirements of FIBA.

Official size 72” x 42” x 1-9/16” thermally fused melamine phenolic resin surfaces on both sides of a solid, 55-lb. density industrial grade particle board. Perimeter and target markings are an integral part of the surface for durability and appearance.

A steel insert provides strength at all of the mounting locations and stiffness along the bottom of the backboard. The integral steel attachment channels are secured to the backboard with special self-drilling, self-tapping attachment screws for semi-permanent installation.

10-YEAR LIMITED WARRANTY

FIBA

STUDY CENTRE PARTNER ON THE NO. 326 SERIES PRO-PAD®

Specify No. 00229 Adhesive or No. 00324-072 Bolt-on Safety Padding (gray only).

TO LEARN MORE— WWW.PORTERATHLETIC.COM/AIA

No. 00324-672 Black Safety Padding for Recreational Backboards

No. 00324-072 Gray Safety Padding for Wood Backboards

No. 00229-000 Adhesive Gray Safety Padding for 1-9/16” Thick Backboards

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 11

2/14/11 10:11 AM


12

BASKETBALL GOALS

5-YEAR LIMITED WARRANTY

5-YEAR LIMITED WARRANTY

NO. 00254-500 TORQ-FLEX® 180° ADJUSTABLE GOAL

NO. 00256-500 TORQ-FLEX® GOAL

The ultimate movable goal—it flexes around a 180 degree arc at the front of the rim, at the sides and anywhere in-between. Ideal for main court competition. Incorporates dual precision hardened high-tensile alloy steel torsion rods, allowing the goal to pivot in all directions while providing proper elasticity and ball rebound characteristics. Goal mount centers 5” x 4” to 5” x 4-1/2”. Includes orange powder-coat, anti-whip net and mounting hardware.

This maintenance-free movable flex goal is an excellent choice for main court competition! The FIBA Torq-Flex® is built to withstand the rigors of pro-level STUDY CENTRE PARTNER slam dunks. In fact, even after 45,000 dunks the goal did not lose any of its original rebound characteristics. Meets all requirements for NCAA, Professional and International (FIBA) recommendations for rebound performance. Goal mount centers 5” x 4” to 5” x 4-1/2”. Includes orange powder-coat, anti-whip net and mounting hardware.

PATENT NO.’S 6,503,160 AND 6,935,972

PATENT NO. 6,503,160

2-YEAR LIMITED WARRANTY

1-YEAR LIMITED WARRANTY

NO. 00245-500 ULTRA-FLEX® GOAL

NO. 00233-000 & 00223-000 POWR-FLEX® GOAL

Specify this goal when you want a true breakaway rim! Designed with a positive lock mechanism that releases with a 180 lb. static load. Tube-tie net attachment system improves safety by eliminating conventional formed wire ties. Recommended for the most demanding competition usage. Includes orange powder-coat, anti-whip net and mounting hardware.

Meets all basketball specifications for movable rims. Protects players and equipment during slam-dunk maneuvers. Concealed shock absorber mechanism. Includes orange powder-coat, anti-whip net and mounting hardware.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 12

2/14/11 10:11 AM


DIVIDER CURTAINS

Center-Roll

13

® REVIT® READY CONTENT

Electric Operated Divider No more hoist cables, straps or overhead support rollers!

for Autodesk® Revit® Software

EDEN PRAIRIE HS, EDEN PRAIRIE, MN CUNNINGHAM GROUP/SCHROCK DEVETTER (ARCHITECT)

The Ultimate in Compact Storage The NO. 2080 CENTER-ROLL® CURTAIN is the finest divider curtain available for today’s modern gymnasium and field house applications. The curtain rolls very neatly on an anodized aluminum tube located in the center of the curtain. This truly revolutionary and unique hoisting system eliminates any high stressed mounting or wear points on your curtain material or overhead structure.

WHITE

ROYAL BLUE

RED

GRAY

Vinyl coated Fleximesh® provides an approximate 45%-50% open air breathing area allowing both light and air transfer.

NAVY BLUE ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN YELLOW GOLD

BROWN

ORANGE

RED

MAROON

WHITE

BLACK

TAN

Curtain fabric is 18 oz laminated vinyl

GRAY

Configurations/Cutback Options

As the aluminum tube rotates, it moves the curtain up, rolling up the top and bottom sections simultaneously. This design allows the Center-Roll® to roll-up twice as quickly as a standard curtain. The assembly is extremely quiet, operates at 30 ft/min., features automatic overheating protection, and is permanently lubricated for a maintenance-free operation. The Center-Roll® curtain rolls neatly and compactly to within 14” of the ceiling or overhead support structure for maximum clearance. When support structures allow, curtain will roll up through a one-foot wide opening and store above ceiling areas to further enhance the aesthetics of your installation. The Center-Roll® can be designed with special openings for bleachers and passageways. It may also be specified as a dual-wall divider curtain incorporating wall-guide drive assemblies. The dual-wall divider is constructed of solid 18 oz vinyl with a one-foot air space between units to provide additional sound reduction capabilities. Additional items found on pages 5-7 can be specified for use with this curtain, such as the Powr-Touch®, Saf-Strap or Sportsonic® II wireless control systems. Available in solid and mesh, all solid, or all mesh.

#2080 SINGLE WALL DIVIDER

VINYL

#2087 DUAL-WALL DIVIDER

VINYL

5-YEAR LIMITED WARRANTY One or both ends of lower fabric (below 3” dia. batten) may be cutback to allow for walkway, bleachers, etc.

One or both ends of curtain can be similar or be cutback for walkway, bleachers, etc.

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 13

2/14/11 10:11 AM


14

DIVIDER CURTAINS

REVIT® READY CONTENT for Autodesk® Revit® Software

NO. 675 ROLL-UP CURTAIN

BEAM CLAMP ASSEMBLY

Porter’s audible motion alarm 1-YEAR LIMITED WARRANTY is standard on all No. 675 ON THE PORTER NO. 675 ROLL-UP CURTAIN Roll-Up curtains to provide increased awareness when equipment is in operation. Additional field wiring is not required. See page 6 for more details. Fabric rolls on a 4-1/2” diameter batten, supported by 5” wide, heavy-duty commercial grade polyester belts located on 20’ maximum centers. Belts roll up smoothly and wrap precisely, on a 2-3/8” diameter line shaft hoist system. You’re ensured of a smooth and fresh look, use after use. Available in solid and mesh, all solid, or all mesh.

WHITE

ROYAL BLUE

RED

GRAY

Vinyl coated Fleximesh® provides an approximate 45%-50% open air breathing area allowing both light and air transfer.

NAVY BLUE ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN YELLOW GOLD

BROWN

ORANGE

RED

MAROON

WHITE

BLACK

TAN

Curtain fabric is 18 oz laminated vinyl

TURNBUCKLE ADJUSTMENT ENCLOSED ROLLER ASSEMBLY 2-3/8" LINE SHAFT STEEL BALL BEARING ROLLERS

UPPER SUPPORT TUBE

2’-0" REFERENCE

When you won’t sacrifice aesthetics for function, our No. 675 Roll-Up curtain is your no-compromise solution. Featuring the strongest, most durable curtain-hoisting system available, No. 675 maintains its smooth, wrinkle-free surface, even when rolled up into a compact two feet for maximum clearance. Its unequalled fabric strength withstands the demands of today’s high-use facilities. Aluminum trim neatly finishes the curtain’s bottom hem, helping to preserve and enhance overall appearance. Convenient raising and lowering of curtain by means of a maintenance-free, 3/4 H.P. oil bath hoist system, controlled by Porter’s standard key switch, optional PowrTouch® or Sportsonic® wireless control system.

5" WIDE HOIST BELT CURTAIN FABRIC 4-1/2" LOWER TUBE

Aluminum trim neatly secures the fabric to the rolling batten to provide an even roll-up every time.

TYPICALpull-up PULL-UP BELT GUIDE ASSEMBLY Typical belt andAND guide assembly (Design LOAD 15# PER LINEAR FOOT load 15#DESIGN per linear foot)

NO. 10796 LINE SHAFT SAFETY LOCK (OPTIONAL) For No. 675 & No. 670 Style Curtains Porter’s line shaft safety lock is designed to provide added protection against the possibility of a divider curtain or batting cage from accidentally falling while in storage or during the raising or lowering cycles. The unique, compact design incorporates an internal centrifugal lock mechanism that instantaneously locks equipment in position should any sudden downward movement occur. The safety lock is designed for use on any divider curtain or batting cage with a 2-3/8” diameter continuous line shaft. Mechanism automatically resets after equipment is repaired and load is removed. Specify the 10796 line shaft safety lock on all No. 670, 675 divider curtains and No. 920 batting cage to ensure the utmost in gymnasium safety planning.

GRAY

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 14

2/14/11 10:12 AM


DIVIDER CURTAINS

REVIT® READY CONTENT

REVIT® READY CONTENT

for Autodesk® Revit® Software

for Autodesk® Revit® Software

15

NO. 640 TRACK TYPE WALK-DRAW CURTAIN

NO. 670 FOLD-UP CURTAIN The No. 670 Fold-Up curtain offers facilities a convenient means of dividing gymnasium space and yet provides an uncluttered appearance overhead. The economical line shaft design raises the fabric by means of vandal-proof hoist cables.

This track-type walk-draw dividing curtain can be easily operated and stacked in the smallest of building recesses or flat against a wall. Ideal for use around the inside perimeter of running tracks for multi-purpose usage of larger facilities.

The hoist mechanism is powered by a 3/4 H.P. maintenance-free sealed oil bath-type gear motor. Available in solid and mesh, all solid, or all mesh.

May also be stacked between bleachers in an 18” separation between sections. Channel track may be formed to any radius. The curtain track is enclosed and is designed with a formed channel to protect the rollers from collecting dust which could hinder the smooth operation of the rollers. Available in solid and mesh, all solid, or all mesh. No. 620 & 625 roller type walk-draw curtains also available.

NEW

NO. 670N FOLD-UP NET CURTAIN

The 670 fold-up curtain is now available with netting in place of fabric. The system utilizes the same 670 line shaft design to raise the net using vandal-proof hoist cables. The hoist mechanism is powered by a ¾ H.P. maintenance-free sealed oil bath-type gear motor that can be center or end mounted. The nylon netting material is offered in five breaking strengths to meet a variety of facility needs. The net curtain is available in black, green, or white.

NET CHARACTERISTICS

BEAM CLAMP ASSEMBLY

Material

TURNBUCKLE ADJUSTMENT ENCLOSED ROLLER ASSEMBLY

Mesh Size

Breaking Strength

2 -2/8" LINE SHAFT WITH CABLE DRUMS

3’-0" REFERENCE

STEEL BALL BEARING ROLLERS 1/8" GALVANIZED HOIST CABLE UPPER SUPPORT TUBE CURTAIN FABRIC LOWER SUPPORT TUBE

Knotless

¾”

95 lbs

Knotless

¾”

135 lbs

Knotted

1 ¾”

210 lbs

Knotted

1 ¾”

340 lbs

Knotted

1 ¾”

940 lbs

TYPICAL ROLLER ASSEMBLY DESIGN LOAD 10# PER LINEAR FOOT

WHITE

ROYAL BLUE

RED

GRAY

Vinyl coated Fleximesh® provides an approximate 45%-50% open air breathing area allowing both light and air transfer.

NAVY BLUE ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN YELLOW GOLD

BROWN

ORANGE

RED

MAROON

WHITE

BLACK

TAN

Curtain fabric is 18 oz laminated vinyl

NO. 640N TRACK TYPE WALK-DRAW NET CURTAIN

NEW

The 640 walk-draw curtain is now available with netting in place of fabric. This system utilizes the same 640 enclosed track with a formed channel to protect rollers from collecting dust which could hinder the smooth operation of the rollers. Each foot of curtain length requires 1” of stack area. The curtain can be provided in two sections allowing one half of the curtain to be stacked on each side of the room. The nylon netting material is offered in five breaking strengths to meet a variety of facility needs, see chart under 670N. The net curtain is available in black, green, or white.

GRAY

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 15

2/14/11 10:12 AM


16

INDOOR CURTAINS

NO. 665 SLOPE-FOLD® CURTAIN

NO. 690 PERIMETER FOLD-UP CURTAIN

Designed to make the best use of ceiling space in sloped rigid-frame structures, the No. 665 Slope-Fold® curtain can be designed and installed to fit flush against the roof frame, providing maximum clearance for competition volleyball or basketball. We custom design each electric, remote-hoist mechanism to fit the contours of your specific installation.

This unique design provides a great way to accommodate the radius around running tracks. Porter custom engineers and factory bends the bottom support tubes to match the contours of your facility. The hoist mechanism is powered by a 3/4 H.P. maintenance-free sealed oil bath-type gear motor. Available in solid and mesh, all solid, or all mesh.

The electric winch system includes a custom engineered variable diameter ratio system which hoists divider to storage position and conforms to the existing slope or contour of the facility.

Variable ratio drum winch assembly enables the 665 curtain to conform to virtually any slope. This direct drive system incorporates a 300:1 gear box and rotary counting limit switch for trouble-free and dependable operation.

WHITE

ROYAL BLUE

RED

GRAY

Typical pull-up and idler line support provide precise tracking of all cables to and from the winch assembly.

NO. BS01 INDOOR BALL STOP SYSTEM

Vinyl coated FlexiMesh® provides an approximate 45%-50% open air breathing area allowing both light and air transfer.

NAVY BLUE ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN YELLOW GOLD

BROWN

ORANGE

RED

MAROON

WHITE

BLACK

TAN

GRAY

Curtain fabric is 18 oz laminated vinyl

This sleeved type ball stop system is great for keeping balls in the immediate area of play. System can be set up the length and/or width of a court. The system consists of internally ribbed aluminum alloy upright posts, 8’ high x 27’ long 1-7/8” square black nylon nets, floor sleeves, net tension winches, and protective padding. Standard kits are available in Court Length (BS01L, 3 nets) or Court Width (BS01W, 2 nets) configuration. BS01L COURT LENGTH

BS01W COURT WIDTH

3-D MODEL DEMO WWW.PORTERATHLETIC.COM/ VIDEO/BS01L.AVI (BS01W.AVI)

1-YEAR WARRANTY

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 16

2/14/11 10:13 AM


INDOOR CAGES

17

Ceiling Suspended Throwing Cage

Minimize set-up and maximize your facility with automated equipment from Porter®

UNIVERSITY OF WISCONSIN STEVENS POINT, WI

Accelerate Your Training Now with the turn of a key or push of a button, the cage and doors can be raised or lowered to the correct position. Set up and take down times are as easy as 1-2-3 with the NO. 90732280 CEILING SUSPENDED THROWING CAGE. Facilities will no longer waste time moving around portable bases, uprights, heavy ballast containers and hoist netting. No need for large storage areas that take up valuable floor space. Lower only the main cage net to use as a shot put cage or as an indoor throwing area for the discus. Meets and exceeds NCAA & USATF rules and requirements for indoor use.

3-D MODEL DEMO WWW.PORTERATHLETIC.COM/ VIDEO/THROWINGCAGE-UP.AVI

1-YEAR WARRANTY

FEATURES

BENEFITS

» Entire cage stores within 3’ of ceiling and descends with a key turn

» No need for large storage areas » No heavy portable uprights or bases to move or store

» Cage door frame units swing down from ceiling and lock into place with folding side brace assemblies

» Cage can be used as shot put cage or indoor throwing net for the discus or weight throw

» Cage and doors can independently rise to the overhead storage position

» System is stored quickly and easily, reducing turnover time for multi-use facilities

» Main cage frame shall lower to approximately 3’ above floor in order to secure netting on top of frame for compact ceiling storage

» Safely protects athletes and officials from errant throws

» Net is made of 600 lb. test, #72 knotted nylon netting

» Single person operation for set up and take down » Cage in stored position provides maximum clearance from floor below

» Cage height in down position 14’ » Cage height when stored 3’

3-D Model Demo

Raised & Lowered

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 17

2/14/11 10:13 AM


18

INDOOR CAGES

NO. 920101 CABLE SUSPENDED BATTING/GOLF CAGE

NO. 90920201 INDOOR BOTTOM LIFT BATTING/GOLF CAGE

Porter’s Cable Tension Indoor Batting Cage is an ideal solution for maximizing space in mezzanines or other gymnasium locations with low ceiling heights. This economical 10’ high x 12’ wide x 70’ long, 1” square mesh netting cage is suspended with a wall supported cable system that spans horizontally wall to wall. Precision bearing cable roller carrier glides allow the batting cage to be easily extended or retracted. The cage can be used for either batting or golf practice, and neatly stored against a wall when not in use.

Unlike standard batting cage systems, Porter’s new indoor bottom lifting batting cage eliminates the tedious task of manually lifting the cage netting on top of the perimeter frame before raising it to the storage position, saving time and facility resources. Conversely, the cage is lowered stopping automatically at its preset height setting ready for play without any other setup requirements. Available in standard size of 10’ high x 12’ wide x 70’ long, with 1” square polypropylene #420 black mesh netting.

3-D MODEL DEMO WWW.PORTERATHLETIC.COM/ VIDEO/ 920101.AVI

1-YEAR WARRANTY

1-YEAR WARRANTY

FEATURES

BENEFITS

FEATURES

BENEFITS

» 1” square knotless polypropylene #420 black mesh

» Cage netting permits both batting and golf practice. High tensile strength material for years of use

» Easy, single step raising and lowering operation

» Time consuming task of manually staging netting on cage frame is eliminated

» 1/4” dia. galvanized aircraft cable (7000 lb. breaking strength) with turnbuckle adjustment horizontal cage support » 10’ high x 12’ wide x 70’ long cage (special sizes available) » 2” x 8” x 2’ southern yellow pine wood pads with clear polyurethane finish » Simple to use manually operated system » Ideal golf/batting cage for facilities with low ceiling or attachment heights

» High strength cable for reliable service. Turnbuckles permit cable to be tensioned and adjusted (maximum span 100’-0”) » Industry standard cage size for compatibility with most facilities » Pads compensate for wall imperfections, anchor alignment and fittings adjustment » Operation training time is reduced and expensive electrical wiring is not required » Wall attachment system installs with minimum clearance requirements. Ceiling retraction clearance is not a concern

» 10’ high x 12’ wide x 70’ long cage frame (special sizes available) » Heavy wall electroplated perimeter frame tubing with specialized connectors » 3/4 H.P., 120 volt, single phase electric winch operator with thermal overload protection » 1” square knotless polypropylene #420 black mesh netting with perimeter reinforcement » Standard audible motion alarm (120 volt operators) » Maintenance free heavy-duty cable drum/line shaft arrangement

» Industry standard cage size for compatibility with most facilities » Durable frame assembly provides excellent corrosion and impact resistance » High torque winch assembly with integral limit switches safely lifts and lowers cage » Cage netting permits both batting and golf practice. High tensile strength material for years of use » Enhances safety by emitting an intermittent warning tone during cage operation » Costly periodic maintenance is avoided; designed for years of trouble free service

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 18

2/14/11 10:13 AM


INDOOR CAGES

NO. 920 BATTING/GOLF CAGE Porter’s overhead-supported, electrically retractable batting/ golf cages are designed to provide a superior product with ease of installation and reduced maintenance. The batting/golf cage is 12’ wide x 70’ long x 10’ high and furnished standard with black netting which provides the players a higher level of contrast between the ball and the netting. Netting can be stored on top of the support framework for compact storage. As an added safety feature, each cage is standard with an Audible Motion Alarm which emits an intermittent warning tone whenever the cage is being raised or lowered.

NO. 330 INDOOR/OUTDOOR BATTING CAGE The unique design of this batting cage allows for seasonal usage in optional indoor/outdoor sleeve systems. The cage is 10’ high x 12’ wide and available in either a 50’ or 70’ length. Netting is a durable, black UV/resistant weather treated nylon with a 1-3/4”, #420 square mesh.

FEATURES

BENEFITS

FEATURES

BENEFITS

» 1” Square knotless polypropolene #420 black mesh

» Netting permits both batting and golf practice. High tensile material provides years of use

» High tensile anodized aluminum uprights with extruded dual internal reinforcement ribs

» Light weight for easy transport. Ribbing provides excellent strength while reducing weight

» Accommodates multiple users without need for multiple cages

» Special rope pulley assembly

» Provides easy set up without the need for ladders or tools

» Cage frame is available in double - wide version with optional center net » Heavywall electroplated perimeter frame tubing with specialized connectors » Maintenance free heavy duty line shaft

» Provides excellent impact resistance and long life » Provides years of trouble free service

19

» Bottom edge net tie downs are included » Usable either outdoors or indoors

» Assures balls stay within the enclosed area » An economical and versatile solution for batting and golf practice year round

TO LEARN MORE— WWW.PORTERATHLETIC.COM/AIA

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 19

2/14/11 10:13 AM


20

OVERHEAD VOLLEYBALL SYSTEM

1900 Series POWR-Net

®

UNIVERSITY OF ST THOMAS, ST PAUL, MN OPUS DESIGN (ARCHITECT)

Quickly, Conveniently Folds-up When instant and frequent volleyball court set-up is required, the NO. 1900 POWR-NET® OVERHEAD SUPPORTED VOLLEYBALL SYSTEMS can’t be beat. The entire volleyball system, including net, judge’s stand, padding etc. quickly and conveniently folds to the overhead storage position electrically. Net heights are instantly adjustable to men’s or women’s competitive heights without releasing net tension. The competition quality net provided with the system incorporates a nylon coated cable to prevent stretching. The clean, narrow profile of the unitized steel support frames are provided with internal, truss-type webbing for excellent stability. Each drop frame is laterally braced by a folding brace system with unique, dual formed steel hinges incorporating integral torsion springs to lock unit in playing position and maximize stability.

Overhead Supported Volleyball System

Make set-up a thing of the past!

POWR-Net® Features For assistance designing your floor plan and space requirements in your new or existing facility, contact your Porter Dealer.

Instant Net Height Adjustment (Shown with padding removed)

91910-100 SINGLE COURT POWR-NET® SYSTEM

Competition System: 91920-100 SINGLE COURT POWR-NET®

91910-300 THREE COURT POWR-NET® SYSTEM

Optional Judge’s Stand provides an unobstructed view of court.

Custom Banners

Single or multiple court systems may be furnished utilizing a single 3/4 H.P. oil bath type winch with integral up and down limit switch operation. Each drop frame support is furnished with a Saf-Strap to provide maximum operational safety requirements. To provide maximum player safety, protective padding that meets all competition requirements is provided on the net height adjustment mechanism as well as the optional judge’s platform. Padding colors available as illustrated on the bottom of page 21.

91910-200 TWO COURT POWR-NET® SYSTEM

Powr-Winch® Net Tensioner (Shown with padding removed)

SYSTEM WITH JUDGE’S STAND

PATENT NO. 6,776,733 THE POWR-NET® IS OFFICIALLY COMPLIANT WITH NCAA, NFHS AND USAV RULES.

Give your athletic facility a hometown advantage with custom graphic banners! School graphics will be printed using a high-quality technique to produce extreme and intense color print quality. Banners are trimmed to size and provided with hook and loop attachment strips for easy installation on Powr-Net systems. Vector graphics must be supplied.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 20

2/14/11 10:13 AM


SLEEVED VOLLEYBALL SYSTEMS

21

Revolutionary Technology Forged from the union of Gill Athletics (innovator of carbon applications for vaulting poles and track javelins) and Porter Athletic Equipment (the industry leader in gymnasium equipment design); comes the NO. 1999 POWR-LINE COMPOSITE VOLLEYBALL SYSTEM! Composite design provides an added level of strength and stiffness to the uprights without increasing the weight. Combining aluminum with carbon fiber can dramatically reduce vibration without having to add additional aluminum or steel. The Powr-Line Composite Volleyball System also includes our proven PowrWinch® net tensioning mechanism. Net heights are Men’s Competition through elementary height settings as specified by the FIVB, NFHS and the United States Volleyball Association.

10-YEAR LIMITED WARRANTY VOLLEYBALL

No. 1999 Features

1999 Series

Composite Carbon Fiber & Aluminum Construction

Porter’s premier standard has raised the bar for strength and rigidity

Clearance Recommendations

COMPOSITE OUTER SHELL

POWR-WINCH® NET TENSIONER

Revolutionary technology combines aluminum and declassified carbon material that will provide your program with a consistent and dependable standard for years of unmatched performance.

Powr-Winch® net tensioning mechanism is sensibly designed and self adjusting. This positive disc brake release device provides the utmost in a durable, yet safe and simple net attachment system.

Custom Padding Add school spirit with standard padding lettering tailored to your team or arena!

NFHS

USAV

NCAA

LIGHT BLUE

ROYAL BLUE

RED

WHITE

ORANGE

YELLOW GOLD

TAN

GRAY

MAROON

PURPLE

BLACK

NAVY BLUE

HEIGHT ABOVE COURT . . . . . 23’ MIN. (7M) . . . . . . . . . . . . .23’ MIN. (7M) . . . . . . . . . . . . 25’ MIN. (7M) AREA AROUND COURT . . . . . 6’ MIN. (1.82M) . . . . . . . . . . . 6’-6” MIN. (2M) . . . . . . . . . . 6’-6” MIN. (2M)

KELLY GREEN DARK GREEN

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 21

2/14/11 10:14 AM


22

SLEEVED VOLLEYBALL SYSTEMS

Proven in World Class Competition Researched, engineered and manufactured to meet the demands of championship play with maximum safety, quick set-up and easy storage. Porter’s POWR-LINE® HIGH STRENGTH LIGHTWEIGHT ALUMINUM VOLLEYBALL SYSTEM is a mark of excellence for years of maintenance free championship performance. Our Powr-Winch® net tensioning mechanism is sensibly designed and self adjusting. This positive disc brake release device provides the utmost in a durable, yet safe and simple net attachment system. Porter’s tension strap with quick release snap hook eliminates the need for the cable to wrap on the winch drum. This prevents kinking and fraying, and adds to the life expectancy of the net. Our Powr-Winch® net tensioning mechanism is designed for safe, user-friendly operation. The Powr-Line® system is available with all the latest accessories such as judge’s stand and slim profile protective padding to meet the requirements as specified by the respective governing agencies and to provide years of safe, competitive play.

No. 1991 Features

1991 Series

POWR-Line

®

Telescoping Standards Researched and engineered to meet the demands of championship play

NO. 01981 PACKAGE

VOLLEYBALL

HIGH-TECH DESIGN Telescopic extruded aluminum upright features a unique reinforcing rib design for superior strength. An integral heavy-duty sheave on top of uprights reduces cable drag and undue tension on the entire system. Integral counter-balance system eases height adjustment with a constant tension spring mechanism. Precise net height is achieved with a heavy-duty pressure lock T-handle which allows

Features for No. 1991 and 1971 Series

» Pair of Powr-Line® Standards » Pair of Protective Pads » Powr-Line® Volleyball Net with Dowels » Pair of PowrLine® Net Antennas » Judge’s Stand and Protective Pads for Judge’s Stand

10-YEAR LIMITED WARRANTY NO. 1991 POWR-LINE® UPRIGHTS AND NO. 1971 POWR-RIB® II UPRIGHTS.

POWR-WINCH® NET TENSIONER

CENTER STANDARD

Provides for super-safe and super-fast net installations. Nylon tension strap eliminates cable kinking, coiling and fraying and adds life expectancy to the net. Removable crank handle included.

Split-collar design allows for unlimited multi-court installations with Powr-Line® and Powr-Rib® II volleyball systems. Equal or different net heights are made possible on adjacent courts. PATENT NO. 6,089,995

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 22

2/14/11 10:14 AM


SLEEVED VOLLEYBALL SYSTEMS

23

Volleyball, Tennis & Badminton Designed for strength and ease of set-up at a competitive price, Porter’s POWR-RIB® II VOLLEYBALL SYSTEM has all the features you need to play competition volleyball while having the ability to accommodate tennis and badminton. This volleyball upright is constructed of high strength, lightweight aluminum extrusion which reduces weight for installation ease. Two reinforcing ribs are centered throughout the entire length of the post for added system strength. A built-in channel runs the length of the post allowing infinite height settings. Collar locks in place with our exclusive pressure lock T-handle. A grooved channel on the upright provides a recessed surface for height setting labels Quick release tension strap eliminates the need for the cable to wrap on the winch drum which prevents cable kinking and fraying. Available with optional center post for unlimited multi-court layouts. The Porter Powr-Rib® II system is available with accessories such as protective padding and judge’s stand which meet the latest specified requirements for competition.

No. 1971 Features

1971 Series

POWR-Rib II Multi-Sport System Meet the demands of a flexible environment

NO. 01961 PACKAGE

VOLLEYBALL BADMINTON

®

TENNIS

DUAL REINFORCING RIBS This newly re-designed aluminum upright is sturdy yet lightweight. Height adjustment collar easily slides up and down the one piece upright and locks into position with a positive pressure locking system to offer infinite height adjustment settings. A grooved channel on the upright provides a recessed surface for height setting labels.

Custom Padding

» Pair of Powr-Rib® II Standards » Pair of Protective Pads » Powr-Line® Volleyball Net with Dowels

PORTABLE SYSTEMS All systems are available as portable units if sleeve and overhead supported systems are not feasible.

» Pair of PowrLine® Net Antennas » Judge’s Stand with Attachment Collar and Protective Pads for Judge’s Stand

Add school spirit with standard padding lettering tailored to your team or arena!

LIGHT BLUE

ROYAL BLUE

RED

WHITE

ORANGE

YELLOW GOLD

TAN

GRAY

MAROON

PURPLE

BLACK

NAVY BLUE

KELLY GREEN DARK GREEN

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 23

2/14/11 10:14 AM


24

FLOOR SLEEVES AND COVER PLATES

Floor Sleeves—We’ve Got You Covered for Every Installation

STANDARD FLOOR SLEEVES 5” and 8” Cover Plates Available in Either Chrome or Brass Sleeves are provided with a chrome or brass cover and secured with a special swivel hinge to prevent removal, theft or injury. The cover plate lies flat on the floor while equipment is in use and has a cork gasket on the underside to protect the finished floor from scratches. A special cover removal key is provided to prevent use by unauthorized individuals. The perimeter mounting collar and cover may be flush-mounted in a wood or synthetic floor. Sleeves are provided for specific use in new construction, remodeling or existing floor installations.

OPTION FOR MOVEABLE OR FLOATING TYPE FLOORS

RECESSED COVER FOR SYNTHETIC FLOORS

State-Of-The-Art Floor Covers For Any Situation!

Removes Easily Without the Use of Tools!

Cover is safely secured in mounting frame assembly and designed to lie flat on the floor while equipment is in use, preventing damage and injuries to players should someone accidentally step on it. A special cover removal key is provided to prevent use by unauthorized individuals.

Excellent choice for use with synthetic floors. Cover recesses below floor and is designed to provide a safe and clean, neat appearance while open or closed.

Designed with a slotted opening in the floor plate to allow up to 2-5/8” of movement in the wood flooring. Sleeve assembly is cast in a high quality zinc alloy with a brass plated finish. System is designed to be installed after the finished wood flooring is complete.

Constructed of a die cast aluminum alloy mounting plate with a brass plated hinged cover. The cover is mounted to an aluminum extruded sleeve for use with any of Porter’s 3-1/2” dia. volleyball standards. The lower end of the sleeve is fitted with a galvanized cover, ready to cast in concrete subfloor systems. Not for use with floating type floors. 00875-200 3-1/2” DIAMETER FLOOR SLEEVE

00873-200 3-1/2” DIAMETER FLOOR SLEEVE

SLEEVES FOR NEW CONSTRUCTION

Each sleeve is provided with a 5” diameter cover plate. 00870-100 3-1/2” DIAMETER FLOOR SLEEVE (CHROME) 00870-200 3-1/2” DIAMETER FLOOR SLEEVE (BRASS)

SLEEVES FOR EXISTING AND FLOATING WOOD FLOORS

Same as above but with 8” diameter cover plate for installation through existing or floating wood floors. 00872-100 3-1/2” DIAMETER FLOOR SLEEVE (CHROME) 00872-200 3-1/2” DIAMETER FLOOR SLEEVE (BRASS)

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 24

2/14/11 10:14 AM


SAFPAD WALL PADDING

25

Safpad

Wall Padding

All Porter Safpads exceed industry safety standards.

Safest Wall Pads on the Market Impact and fire safety risks vary in every facility. Porter produces eight unique Safpads™ each with distinct impact and fire-related characteristics providing optimal protection in every setting. When it comes to specifying wall pads to meet the safety standards in your facility, contact a Porter safety expert to identify the level of risk that exists within your facility and provide product recommendations to minimize those risks.

GREEN GUARD Indoor Air Quality Certified

FIRE PROTECTION Tested to meet NFPA 286 & NFPA 255 tests. Porter’s FR-Safpad® provides the ultimate in player safety and building protection. Manufactured and tested as a singular unit with state-of-the-art materials, the FR-Safpad® provides excellent smoke and flammability characteristics and is tested to meet both the NFPA 286 and NFPA 255 tests. The NFPA 286 is the standard method for testing contribution of wall and ceiling interior finish to room fire growth. 2003 International Building Code 803.5: “Interior wall and ceiling finish materials, other than textiles, tested in accordance with NFPA 286 and meeting the acceptance criteria of Section 803.2.1, shall be permitted to be used where a Class A classification in accordance with ASTM E84 is required”.

NFPA 286

The NFPA 255 is the standard test method for surface burning characteristics of building materials. Further documentation regarding impact and fire testing are available.

NFPA 255 (ASTM E-84)

All Porter wall pads are now GREENGUARD® certified. They are screened for more than 10,000 chemicals and meet strict chemical emission standards.

IMPACT PROTECTION Complies with the new ASTM F2440-04 standard.

Custom Panels

The American Society for Testing and Materials (ASTM) established standard F2440-04 to identify a minimum level of protection for impact and shock absorption properties for wall padding. Most Safpad™ products exceed this standard.

A GREAT SPONSORSHIP PROGRAM!

For maximum protection, wall padding should be specified for walls, doors, columns and any other type of projection in and around an activity center where a player/athlete may come into contact with the obstruction.

LIGHT BLUE

ROYAL BLUE

RED

WHITE

ORANGE

GRAY

MAROON

PURPLE

BLACK

NAVY BLUE

YELLOW GOLD

TAN

KELLY GREEN DARK GREEN

Graphics are printed using a high-quality technique to produce intense color and laminated to provide an extremely durable surface. Graphics are digitally printed on a durable polyester reinforced vinyl material with superior tear strength, adhesion and flame retardant properties. Printing wraps around the sides of each panel to create an uninterrupted visual appearance for any size logo or photograph across an entire wall section. Vector graphics must be supplied.

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 25

2/14/11 10:14 AM


26

SAFPAD WALL PADDING

2011 SafPad™ Wall Padding Line-Up

GREENGUARD® CERTIFIED

GREENGUARD® CERTIFIED

GREENGUARD® CERTIFIED

NO. 572 3” SUPERSAFE PAD

NO. 570 2” SUPERSAFE PAD

NO. 576 3” FIRESAFE PAD

00572-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00570-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00576-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00572-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

00570-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

00576-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

FEATURES » Exceeds ASTM F2440-04

FEATURES » Exceeds ASTM F2440-04

FEATURES » Great for areas where the end of play area is 8+ feet away from wall

» Great for areas where the end of play area is 0-4+ feet away from wall

» Excellent option for facilities needing Class ‘A’ fire certification » May be used in gyms that are often or always unsupervised

GREENGUARD® CERTIFIED

» Great for areas where the end of play area is 4+ feet away from wall

» Excellent option for facilities needing Class ‘A’ fire certification » May be used in gyms that are often or always unsupervised

GREENGUARD® CERTIFIED

» Does NOT meet ASTM F2440-04 Impact Criteria

» Excellent option for facilities needing Class ‘A’ fire certification » Best used in gyms that are often or always supervised

GREENGUARD® CERTIFIED

NO. 565 2” SMART PAD

NO. 569 6” SPRINT PAD

NO. 561 3” REBOND PAD

00565-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00569-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00561-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS

00565-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

00569-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

00561-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

FEATURES » Exceeds ASTM F2440-04

FEATURES » Exceeds ASTM F2440-04

FEATURES » Exceeds ASTM F2440-04

» Great for areas where the end of play area is 4+ feet away from wall

» 100% recycled foam made from renewable resources » Affordable option for facilities where a fire rating is needed (Class B)

» Great for areas where the end of play area is 0-4+ feet away from wall

» Affordable option for facilities where a fire certification is not needed » Best used in gyms that are sometimes supervised

» Great for areas where the end of play area is 4+ feet away from wall » 100% recycled foam

» Affordable option for facilities where a fire certification is not needed » Best used in gyms that are often or always supervised

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 26

2/14/11 10:14 AM


SAFPAD WALL PADDING

Pad Vinyl Color Options

LIGHT BLUE

ROYAL BLUE

RED

WHITE

ORANGE

YELLOW GOLD

TAN

GRAY

MAROON

PURPLE

BLACK

NAVY BLUE

27

KELLY GREEN DARK GREEN

GREENGUARD® CERTIFIED

NO. 575 2” FIRESAFE PAD

FIRE RETARDANT MOLDED INSERT FOR WALL PAD CUTOUTS (Available for 2” Pads only)

00575-0XX 2’ X 6’ PANELS WITH 1” NAILING MARGINS 00575-1XX 2’ X 5’-10” PANELS LESS NAILING MARGINS

FEATURES » Great for areas where the end of play area is 8+ feet away from wall » Does NOT meet ASTM F2440-04 Impact Criteria

» Excellent option for facilities needing Class ‘A’ fire certification » Best used in gyms that are often or always supervised

The neat, clean appearance of the molded inserts makes them an ideal option when cutouts are required for electrical outlets and switches. Inserts fit through field cutouts and are stapled in place on the backside of the pad. 00341-036

Inserts accommodate pad thickness of 2-7/16”. Available in two sizes to fit single-gang and double-gang electrical boxes. Inserts are molded in flame-retardant rubber. Available in two colors, gray and graphite.

SINGLE-GANG/GRAY (PACK OF 36)

00341-136

SINGLE-GANG/GRAPHITE (PACK OF 36)

00342-024

DOUBLE-GANG/GRAY (PACK OF 24)

00342-124

DOUBLE-GANG/GRAPHITE (PACK OF 24)

PATENT NO. 6,769,562

GRAY

GRAPHITE

B

C

A

A

A

D

C

GREENGUARD® CERTIFIED

NO. 560 2” REBOND PAD 00560-280XX 2’ X 8’ PANELS WITH 1” NAILING MARGINS 00560-281XX 2’ X 8’ PANELS LESS NAILING MARGINS

FEATURES » Exceeds ASTM F2440-04 » Great for areas where the end of play area is 8+ feet away from wall » 100% recycled foam

» Affordable option for facilities where a fire certification is not needed » Best used in gyms that are often or always supervised

REMOVABLE WALL PAD OPTIONS Special Clips Improve the Appearance of Wall Pads! An attractive, convenient alternative to attaching wall pads that will provide your facility with a smooth and neat appearance. The Z-Clip attachment system allows worn or vandalized pads to be removed for repair or replacement by simply lifting the panel upward or removing the top trim channel. This superior wall padding attachment method is designed to incorporate the use of heavy extruded aluminum wall and baseboard attachment clips to provide ease of installation and a clean, neat appearance.

ATTACHMENT CLIPS (EACH) 00347-100

A STYLE: WALL ATTACHMENT Z-CLIP — 6’ LONG

00347-200

B STYLE: PANEL ATTACHMENT Z-CLIP — 1’-10” LONG

00347-300

C STYLE: Z-CLIP CHANNEL — 6’ LONG

00347-400

D STYLE: FLOOR MOLDING CHANNEL — 6’ LONG

SEE SPECIFICATIONS ON ALL OUR PRODUCTS » FACILITYSPECS.COM • PORTER@PORTERATHLETIC.COM

110214_facilitiesRD4.indd 27

2/14/11 10:14 AM


28

GYMNASIUM STORAGE

1100 Series

Mat Mover

®

Twin Two-Motor System

Return valuable floor space to your gymnasium!

Your Storage Solution

Sling Configurations

You have two wrestling mats and the season is over...or the wrestling room is needed for a meeting...what do you do with the wrestling mats? Store them in the least expensive storage area of the school, overhead! THE MAT MOVER® is a safe and economical way to move and store wrestling mats. FEATURES

Not only will the Mat Mover® return valuable floor space to be better utilized, it will eliminate the dangerous, heavy and awkward lifting by students and coaches. Mats will be protected during transit and while in their storage position. 91101-100 HOLDS UP TO ONE 45’ X 45’ MAT 91101-200 HOLDS UP TO TWO 45’ X 45’ MAT

A back-up safety system to each hoist units self-monitoring system, is activated each time the Mat Mover® is used. Should the self-monitoring system turn off for any reason, the watchdog timers will “time-out”, shutting down the entire system. It’s the same as having a guard on duty 24 hours a day!

Watchdog timer

KARL TRAEGER ELEMENTARY OSHKOSH, WI

» Two heavy-duty 1-horsepower hoists » Two electric brakes

Sling configurations will vary with Mat Mover® styles and the number and size of mats being hoisted.

TWO MATS IN ONE LARGE SLING

SINGLE MAT IN ONE SLING

SLING COLOR OPTIONS

NAVY BLUE

YELLOW GOLD

ROYAL BLUE LIGHT BLUE DARK GREEN KELLY GREEN

TAN

BROWN

ORANGE

RED

BLACK

GRAY

MAROON

WHITE

®

» Micrologix controller to provide self-leveling and system monitoring

More Mat Movers®

» Audible motion alarm will alert athletes when unit is in motion » Watchdog timers » Main disconnect switch on control panel » Momentary safety key switch with the dual-key feature for added safety. » Power requirement: choose from 208 volt, 230 volt, 460 volt in 3 phase, 60hz.

Motion Alarm System For the utmost in safety an audible motion alarm sounds when the system is in motion. This is a great feature to increase athlete’s awareness when mats are being moved in and out of storage.

NO. 1105 MINI-STATIONARY MAT MOVER®

NO. 1100 TRAVELING MAT MOVER® (MINI OR FULL-SIZE)

The mini stationary unit can store from one (1) to three (3) 14’ x 42’ mats. An audible motion alarm is furnished as standard and will alert athletes when unit is in motion. This single 1.5 H.P. motor system is ideal for storing sectional mats.

The traveling Mat Mover® is an ideal storage system which lifts and transports mats to and from balcony storage, second level wrestling rooms or simply moves the mats from above spectator seating areas.

ORDERS & PRODUCT SUPPORT: (888) 277-7778 (217) 367-8438 • FAX: (217) 239-2255

110214_facilitiesRD4.indd 28

TWO MATS IN TWO TWO MATS IN TWO THREE MATS IN TWO SLINGS (SIDE BY SIDE) SLINGS (VERTICAL) SLINGS (VERTICAL)

Contact your Porter dealer for part numbers and detailed specifications.

2/14/11 10:14 AM


29

Top Facilities Prefer Porter NCAA DIVISION I

NCAA DIVISION III

AUSTIN PEAY UNIVERSITY

DOMINICAN UNIVERSITY

BELMONT UNIVERSITY

HAVERFORD COLLEGE

DEPAUL UNIVERSITY

KENYON COLLEGE

DUQUESNE UNIVERSITY

SPRINGFIELD COLLEGE FIELDHOUSE & WELLNESS CENTER

EASTERN WASHINGTON UNIVERSITY RECREATION CENTER GEORGIA SOUTHERN UNIVERSITY

THE CAGE CENTER BERRY COLLEGE

GONZAGA UNIVERSITY

UNIVERSITY OF WISCONSIN OSHKOSH STUDENT RECREATION AND WELLNESS CENTER

MARKIN FAMILY STUDENT RECREATION CENTER BRADLEY UNIVERSITY

VIRGINIA WESLEYAN COLLEGE

ADDISON TRAIL HS, ADDISON, IL

MERCER UNIVERSITY CENTER

WIGHT & COMPANY (ARCHITECT) 917 BACKSTOPS, 949 BACKSTOPS, 2080 CENTER-ROLL CURTAINS, 670 FOLD UP CURTAINS, 690 RADIUS BENT PERIMETER FOLD UP CURTAINS, POWR-TOUCH 2.5

MIDDLE TENNESSEE STATE UNIVERSITY NORTHWESTERN UNIVERSITY OHIO STATE UNIVERSITY SAINT JOSEPH’S UNIVERSITY

YORK COLLEGE

NAIA MAYVILLE STATE UNIVERSITY OLIVET NAZARENE UNIVERSITY SOKA UNIVERSITY OF AMERICA

SAMFORD UNIVERSITY

SOUTHERN NAZARENE UNIVERSITY

SAN JOSE STATE UNIVERSITY

TEXAS WESLEYAN UNIVERSITY

SOUTHEAST MISSOURI STATE STUDENT AQUATIC CENTER TEXAS STATE UNIVERSITY RECREATION CENTER RENOVATION AND EXPANSION UNIVERSITY OF ARKANSAS

INSTITUTIONAL/OTHER ADIDAS HONG KONG LTD AKRON GENERAL HEALTH & WELLNESS CENTER - NORTH

UNIVERSITY OF ARKANSAS AT PINE BLUFF

ALEXANDER FAMILY YMCA

UNIVERSITY OF CALIFORNIA UNIVERSITY OF CHICAGO

CARBONDALE RECREATION & COMMUNITY CENTER

UNIVERSITY OF ILLINOIS ASSEMBLY HALL

CASSIE CAMPBELL COMMUNITY CENTRE

UNIVERSITY OF ILLINOIS UBBEN ATHLETIC BUILDING

CHAMPIONS SPORTS COMPLEX

UNIVERSITY OF MAINE

DES MOINES CHRISTIAN ACADEMY

UNIVERSITY OF NOTRE DAME UNIVERSITY OF TENNESSEE

RIDGEWOOD HS, NORRIDGE, IL

VANDERBILT UNIVERSITY

DLA (ARCHITECT) 923 BACKSTOPS, 950 BACKSTOPS, 955 BACKSTOPS, 670 FOLD –UP CURTAINS, 690 PERIMETER RADIUS FOLD-UP CURTAINS

VANDERBILT UNIVERSITY (MEMORIAL COLISEUM) WAGNER COLLEGE XAVIER UNIVERSITY

ALLSTATE ARENA

CITRUS COLLEGE

DIXON ATHLETIC CENTER EPISCOPAL ACADEMY DURHAM COLLEGE/UNIVERSITY OF ONTARIO INSTITUTE OF TECHNOLOGY ATHLETIC, FITNESS HOUMA - TERREBONNE CIVIC CENTER

YALE UNIVERSITY

INVENSYS FOXBORO BRANCH YMCA

NCAA DIVISION II

MOHEGAN SUN ARENA

COLORADO SCHOOL OF MINES STUDENT RECREATION CENTER COLUMBUS STATE UNIVERSITY

NORTHWEST BRANCH YMCA PICKLEWEED PARK COMMUNITY CENTER EXPANSION

FAIRMONT STATE

PIONEER PARK COMMUNITY CENTER

FRANKLIN PIERCE COLLEGE

PLAINFIELD HIGH SCHOOL

GRAND VALLEY STATE UNIVERSITY LAKER TURF BUILDING

PRO-HEALTH & FITNESS CENTER – VIERA

LYNN UNIVERSITY

PROVIDENCE CIVIC CENTER

PHILADELPHIA UNIVERSITY

SILVERLAKES SPORTS CENTER

TARLETON STATE

STEPHEN D. PERSINGER COMMUNITY RECREATION CENTER

TUSCULUM COLLEGE UNIVERSITY OF TAMPA

UNIVERSITY OF ST THOMAS, ST PAUL, MN OPUS DESIGN (ARCHITECT) 950 BACKSTOPS, 952 BACKSTOPS, 91920100 FOLD UP VB SYSTEM WITH JUDGE’S STAND, 670N NET CURTAIN, 670 MESH/VINYL CURTAINS, 690 CURVED PERIMETER CURTAIN, 90732280 INDOOR TRACK WEIGHT THROW CAGE, 90920201 BOTTOM LIFT BATTING/ GOLF CAGES, POWR-TOUCH 2.5, GILL SKYDEX VAULT BOX, F440M SAND PIT FORM, 730148 SAND PIT COVER, F44001 SAND CATCHER TUBS, 4350 TAKE OFF BOARDS, 366 SHOT/HAMMER CIRCLES, 363 ALUMINUM SHOT TOEBOARD

THE NORTHSIDE AZTLAN COMMUNITY CENTER THIBODAUX CIVIC CENTER UNITED STATES OLYMPIC TRAINING CENTER UNIVERSITY OF TORONTO WASHINGTON SPORTS CLUB COLUMBIA HEIGHTS WENATCHEE VALLEY SPORTSPLEX YANG-EN UNIVERSITY

SEE SE E E SP SPEC SPECIFICATIONS ECIF EC IFIC IF IC C AT A IO O NS S ON O N AL A ALL LL O OU OUR U R PR PPRODUCTS ROD ODUC OD UCC TS U T » FA FACI FACILITYSPECS.COM CILI CI L TY Y SPEC SPP EC C S.CO S . CO C M • PO PORTER@PORTERATHLETIC.COM PORT RTER RT T ER E R@P @ OR @P O TE TERA RA ATH THLE LEE TI LETI TIC. C .CO COM CO M

110214_facilitiesRD4.indd 29

2/14/11 10:14 AM


PORTER ATHLETIC, INC. 601 Mercury Dr. Champaign, IL 61822 Phone: (217) 367-8438 Toll Free: (888) 277-7778 Fax: (217) 239-2255 porter@porterathletic.com www.facilityspecs.com

1735 Series

Portable Litania Collection

NO. 1735 COMPETITION PORTABLE Top-of-the-Line Performance! Porter’s newest portable sets the standard for performance in today’s demanding sports venues. Whether it’s the World Championships or the State Championship, facilities world wide choose Porter. 01735-108 PORTABLE WITH 10’-8” (3.25M) EXTENSION 01735-800 PORTABLE WITH 8’ (2.44M) EXTENSION

FEATURES • Counterbalanced tension spring operating system allows one individual to easily raise or lower unit

FIBA STUDY CENTRE PARTNER 10-YEAR WARRANTY

• Tubular steel top brace provides a concealed raceway for shot clock, perimeter lighting and camera wiring • 4” thick front padding for maximum player protection

10’-0”

• Specially designed “no slack” tie-down system meets NCAA and NFHS rules and assure safe play

PROFILE COURT LINE

B

4’-0”

A

6’-5”

GRAY

ROYAL BLUE

MAROON

RED

PURPLE

WHITE

BLACK

ORANGE

NAVY BLUE

YELLOW GOLD

TAN

KELLY GREEN DARK GREEN

01735-800

01735-108

A

8’-0”

10’-8”

B

4’-0”

6’-8”

WIDTH LENGTH HEIGHT

IN STORAGE

LIGHT BLUE

7’-1”

7’-1”

13’-10”

16’-6”

6’-4”

6’-4”

• Backboard mounts independent of the goal allowing for easy goal removal without disturbing the backboard • Center-Strut® horizontal backboard support eliminates any strain on the glass backboard • Available in 10’-8” and 8’ extensions, adjustable to 8’, 9’ and 10’ goal heights

© 2011 PORTER ATHLETIC, INC.

110214_facilitiesRD4.indd 30

2/14/11 10:15 AM

Porter Facilities 2011 Catalog  

Porter is committed to serving our customers at an industry leading level. Our investment in state of the art manufacturing facility and pro...

Read more
Read more
Similar to
Popular now
Just for you