Page 1

BROUGHTON PLANT HIRE established 1969

BROUGHTON PLANT HIRE & SALES HIRE GUIDE 2016/17 Specialist suppliers to the heating, ventilation and fire protection trades

e: hire@mbroughtonltd.co.uk Southern Depot: 01708 383350 Midlands Depot: 01773 609789 South West Depot: 01275 875587


OFFICIAL SERVICE CENTRE FOR

APPROVED TOOLING DISTRIBUTOR FOR

TRAINING

We can arrange all your training requirements.

ACCREDITATION


1

CONTENTS 02 04 16 25 28 32 34 38 41 43 46

HEALTH & SAFETY

PRESS FITTING PIPE FITTING WELDING ACCESS EQUIPMENT POWERED ACCESS HANDLING & LIFTING DRILLING GRINDING & CUTTING SITE SERVICES ELECTRICAL CABLE CRIMPING & CUTTING

Hire rates charged at a minimum of one week, thereafter on a daily basis. All Plant supplied with relevant safety instructions and test certification. Images used through the this hire guide are for illustration purposes only All hire rates shown in this brochure are exlusive of VAT. Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


HEALTH & SAFETY INFORMATION To help you select the correct Personal Protection please follow the P.P.E. symbol Guide listed below for the relevant Plant items.

Eye Protection

Protective footwear

Protective gloves

Face Shield

Dust Mask

Welding Visor/Welding Goggles

Ear Defenders

Respirator, suitable for welding and/or cutting fumes

Full Body Safety Harness c/w a Lanyard

Safety Helmet

All the above are available from stock, each complying fully with Health & Safety Regulations. All PPE associated products in this brochure are recommended for use and are available as sales items. Please contact our hire desk for more information.

HAND ARM VIBRATION DATABASE

1

GREEN:

NO MORE THAN 8 HOURS CONSTANT USE

2

AMBER:

NO MORE THAN 2 HOURS CONSTANT USE

3

RED:

DOWN TO INDIVIDUAL, USER NEEDS TO DO A RISK ASSESSMENT ON EQUIPMENT BEFORE USE. SHOULD NOT EXCEED 10 - 20 MINS USE

VIBRATION MEASURED IN m2

1

GREEN:

BELOW 5m2

2

AMBER:

ABOVE 5m2 BUT BELOW 10m2

3

RED:

ABOVE 10m2

The hand/harm vibration level information in this brochure, is based on Data supplied by the Relvant manufacturers. Broughton Plant Hire reproduces this data in good faith. For guidance only & not as a substitute for your own risk assessment.

www.broughtonplanthire.co.uk


SALES ITEMS BROUGHTON PLANT HIRE established 1969

Broughton Plant Hire and Sales stock a wide range of consumables, ancillaries and PPE for sale. Please call us to enquire further about our wide range of goods available for next day delivery. • MACHINE SPARES • PPE –PROTECTIVE FOOTWEAR, HI VIS CLOTHING, HARD HATS ETC • WELDING CONSUMABLES • ABRASIVE DISCS • HAND AND POWER TOOL CONSUMABLES • SITE SECURITY E.G. SITE BOXES, FITTING STORES • POWER AND LIGHTING E.G. SITE LIGHTS, TRANSFORMERS ETC • ACCESS EQUIPMENT E.G. LADDERS, PODIUM STEPS ETC

☎ 01708 383 350 Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


PRESS FITTING

When ordering Presstools please specify what Pressfitting System is being used. As not all Jaws & Collars are compatible. If you are unsure please call for advice on: t: 01708 383350 Preparation of Pipe is important. We can supply Pipe Cutters & Deburrers for hire or sale.

All Novopress Tools are calibrated using a 8790 Pressure Tester and Jaws are inspected with a 31465 Optical Laser Test Rig.


5

MAPRESS COPPER

weekly

MAPRESS COPPER KIT 1

15-35mm

£40.00

Novopress EFP202 / ECO202 / ECO2 / EFP2 110v Presstool Inclusive: 15-35mm Jaws

MAPRESS COPPER KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

15-67mm

£75.00

67-108mm

£95.00

15-108mm

£110.00

67-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

MAPRESS COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

MAPRESS COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

MAPRESS COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

MAPRESS COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors

MAPRESS COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

MAPRESS COPPER KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors

MAPRESS COPPER KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

MINI COPPER KIT

15-35mm

£40.00

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


6

MAPRESS CARBON STEEL/STAINLESS STEEL MAPRESS STEEL KIT 1

15-35mm

weekly £40.00

Novopress EFP202 / ECO202 / ECO2 / EFP2 110v Presstool Inclusive: 15-35mm Jaws

MAPRESS STEEL KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

67-108mm

£95.00

15-108mm

£110.00

15-67mm

£75.00

76-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

MAPRESS STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

MAPRESS STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

MAPRESS STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors

MAPRESS STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

MAPRESS STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

MAPRESS STEEL KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 76-108mm Collars and Adaptors

MAPRESS STEEL KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors (not suitable for 66.7mm Gerberit Mapress carbon steel)**

MINI STEEL KIT

15-35mm

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws **For 66.7mm Geberit Mapress Carbon Steel please use Novopress ECO301 Press Tool

www.broughtonplanthire.co.uk

£40.00


7

SPRINKLER SYSTEM MAPRESS SPRINKLER KIT 1

weekly 15-28mm

£40.00

35mm

£29.50

42-54mm

£17.50

76.1mm

£19.50

88.9mm

£19.50

Novopress ECO301 110v Presstool Inclusive: 15-28mm Jaws

MAPRESS SPRINKLER KIT 2 Novopress 35mm HP Collar and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 3 Novopress 42-54mm Collars and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 4 Novopress 76.1mm Collar and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 5 Novopress 88.9mm Collar and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 6

76-108mm

£110.00

HCPS Supersize Presstool Inclusive: 76-108mm Collars and Adaptors

MEPLA MEPLA KIT1

weekly 16-32mm

£40.00

Novopress ACO202 / ACO102 / ACO203 Battery Presstool Inclusive: 16-32mm Jaws, Deburrer and Cutter

MEPLA KIT 2

16-50mm

£57.50

Novopress ACO202 / ACO102 / ACO203 Battery Presstool Inclusive: 16-50mm Jaws, Deburrer and Cutter

MEPLA KIT 3

63mm Jaw Kit

£17.50

75mm Jaw Kit

£17.50

63mm Jaw Kit, Cutter and Deburrer

MEPLA KIT 4 75mm Jaw Kit, Cutter and Deburrer

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


8

COPPER

weekly

YORKSHIRE COPPER KIT 1

15-35mm

£40.00

Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws

YORKSHIRE COPPER KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

15-67mm

£75.00

67-108mm

£95.00

15-108mm

£110.00

67-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

YORKSHIRE COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

YORKSHIRE COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

YORKSHIRE COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

YORKSHIRE COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive 67-108mm Collars and Adaptors

YORKSHIRE COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

YORKSHIRE COPPER KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors

YORKSHIRE COPPER KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars, Adaptors

MINI COPPER KIT

15-35mm

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws

www.broughtonplanthire.co.uk

£40.00


9

CARBON STEEL/STAINLESS STEEL YORKSHIRE STEEL KIT 1

15-35mm

weekly £40.00

Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws

YORKSHIRE STEEL KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

15-67mm

£75.00

67-108mm

£95.00

15-108mm

£110.00

67-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

YORKSHIRE STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

YORKSHIRE STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

YORKSHIRE STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

YORKSHIRE STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive 67-108mm Collars and Adaptors

YORKSHIRE STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

YORKSHIRE STEEL KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors

YORKSHIRE STEEL KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

MINI STEEL KIT

15-35mm

£40.00

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws

MULTI LAYER HENCO PVDF/BRASS

weekly

BATTERY / 110v PRESSTOOL

16-32mm

£40.00

BATTERY / 110v PRESSTOOL

16-50mm

£57.50

BATTERY / 110v PRESSTOOL

16-63mm

£75.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


10

COPPER

weekly

SANHA COPPER KIT 1

15-35mm

£40.00

Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws

SANHA COPPER KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

15-67mm

£75.00

67-108mm

£95.00

15-108mm

£110.00

67-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

SANHA COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

SANHA COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

SANHA COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

SANHA COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors

SANHA COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

SANHA COPPER KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors

SANHA COPPER KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars, Adaptors

MINI COPPER KIT

15-35mm

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws

www.broughtonplanthire.co.uk

£40.00


11

CARBON/STAINLESS/BRONZE SANHA STEEL KIT 1

weekly 15-35mm

£40.00

Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws

SANHA STEEL KIT 2

15-35mm

£40.00

15-35mm

£40.00

42-54mm

£17.50

15-67mm

£75.00

67-108mm

£95.00

15-108mm

£110.00

67-108mm

£120.00

Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws

SANHA STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws

SANHA STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools

SANHA STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors

SANHA STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors

SANHA STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

SANHA STEEL KIT 8

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors

SANHA STEEL KIT 9

15-108mm

£165.00

Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors

MINI STEEL KIT

15-35mm

£40.00

Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws

MULTI LAYER

weekly

BATTERY / 110v PRESSTOOL

16-32mm

£40.00

BATTERY / 110v PRESSTOOL

16-50mm

£57.50

BATTERY / 110v PRESSTOOL

16-63mm

£75.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


12

COPPER/CARBON/STAINLESS VIEGA KIT 1

weekly 15-35mm

£40.00

15-54mm

£57.50

15-67mm

£75.00

Viega Battery Pressgun Inclusive: 15-35mm Press Jaws

VIEGA KIT 2 Viega Battery Pressgun Inclusive: 15-54mm Press Jaws

VIEGA KIT 3

Viega Battery Pressgun Inclusive: 15-67mm Press Jaws, Press Rings and Adaptors

VIEGA KIT 4

67-108mm

£95.00

15-108mm

£110.00

Viega Battery Pressgun Inclusive: 67-108mm Press Rings and Adaptors

VIEGA KIT 5

Viega Battery Pressgun Inclusive: 15-108mm Press Jaws, Press Rings and Adaptors (excluding 64mm Press RIng)

VIEGA PRESS RING

64mm

£9.00

64mm Press Ring

VIEGA MINI KIT

15-35mm

£40.00

15-35mm

£26.50

Viega Battery Pressgun Picco Inclusive: 15-35mm Press Jaws

VIEGA HINGED RING SET FOR MINI KIT Inclusive: 15-35mm Press Ring Set for Hinged Press Jaws

MEGA PRESS MEGA PRESS KIT

weekly 1

/2"-2"

Viega Battery Pressgun Inclusive: 1/2"-2" Press Collars

www.broughtonplanthire.co.uk

£75.00


13

MULTILAYER COMPOSITE PIPE (U PROFILE) WAVIN KIT 1

weekly

16-40mm

£40.00

16-50mm

£57.50

63mm

£17.50

75mm

£22.00

Novopress ACO102 Presstool Inclusive 16-40mm Jaws

WAVIN KIT 2 Novopress ACO202/3 Presstool Inclusive 16-50mm Jaws

WAVIN KIT 3 63mm Jaw

WAVIN KIT 4 75mm Collar and adaptor

MLCP PIPE CUTTER

16-75mm

A full range of Calibration Kits/ Mandrels available

CARBON/STAINLESS/COPPER/GAS B PRESS KIT 1

£8.50 POA

weekly

15-35mm

£40.00

15-35mm

£40.00

Rems Power Press 110v Inclusive: 15-35mm Jaws

B PRESS KIT 2 Rems AKKU Press Battery Inclusive: 15-35mm Jaws

B PRESS KIT 3

42mm

£8.75

54mm

£8.75

67mm

£75.00

15-28mm

£40.00

67-108mm

£95.00

42mm Rems Jaw

B PRESS KIT 4 54mm Rems Jaw

B PRESS KIT 5 Novopress ECO301 110v Presstool Inclusive: Adaptor & 67mm Collar

B PRESS KIT 6 MINI KIT Rems Battery Minipress Inclusive: 15-28mm Jaws

B PRESS KIT 7 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


14

POLYPRESS

weekly

REMS AKKU PRESSTOOL

16-32mm

£40.00

REMS AKKU PRESSTOOL PRESS COLLAR KIT

16-50mm 63mm

£57.50 £17.50

PRESS COLLAR KIT

75mm

£17.50

POLYSURE REMS AKKU PRESSTOOL

weekly 15-22mm

£40.00

weekly KLAUKE BATTERY PRESSTOOL KLAUKE BATTERY PRESSTOOL PRESS COLLAR KIT PRESS COLLAR KIT PRESS COLLAR KIT PRESS COLLAR KIT CUTTER & BENDING TOOL SET PIPE BENDING TOOL 110v

16-32mm 16-50mm 63mm 75mm 90mm 110mm 16-110mm 16-32mm

PEX AL PEX (Series F5 ‘U’ Profile / Series F9 ‘TH’ Profile) REMS AKKU PRESSTOOL REMS AKKU PRESSTOOL PRESS COLLAR KIT PRESS COLLAR KIT

16-32mm 16-50mm 63mm 75mm

RAUTOOLS

£57.50 £57.50 £17.50 £17.50 £22.00 £22.00 £22.00 £42.00

weekly £40.00 £57.50 £17.50 £17.50

weekly

A2/A3 BATTERY – HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 16 – 40mm H/G1 HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 40 – 110mm

www.broughtonplanthire.co.uk

£52.00 £110.00


15

PRESS SYSTEM ACCESSORIES (CARBON/STAINLESS)

weekly

MANUAL PIPE BENDER 15-28mm REMS CURVO 110v ELECTRIC BENDER 15-35mm TUBELA ROTARY SCISSOR BENDER 15-54mm (CARBON STEEL) MANUAL PIPE CUTTER 15-54mm MANUAL PIPE CUTTER 76-108mm AXXAIR BENCH MOUNTED PIPE CUTTER 110v UP TO 108mm REMS CENTO PIPE CUTTER 110v 22-108mm (CARBON, STAINLESS OR COPPER CUTTING WHEELS AVAILABLE)

MULTILAYER

£25.00 £50.00 £115.00 £8.50 £12.50 £85.00 £48.00

weekly

REMS SWING BENDING TOOL

14-32mm

£22.00

REMS CURVO 50 BENDING TOOL

32-50mm

£50.00

REMS PYTHON BENDING TOOL

40-63mm

£55.00

MANUAL PIPE CUTTER

16-75mm

£8.50

COPPER

weekly

MANUAL PIPE CUTTER

15-108mm

£12.50

REMS CENTO 110v PIPE CUTTER

22-108mm

£48.00

REMS CURVO 110v ELECTRIC BENDER

15-35mm

£50.00

RATCHET COPPER BENDER

15-54mm

£95.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


16

PIPE FITTING EQUIPMENT

16

for more information visit www.broughtonplanthire.co.uk www.broughtonplanthire.co.uk

telephone: 01708 383350


17

PIPE THREADING MACHINES

weekly

RIDGID 300C THREADING MACHINE 1⁄2"-2" BSP C/W PIPE SUPPORT

£40.00

RIDGID 1233 THREADING MACHINE

£62.00

1⁄

"-3" BSP C/W PIPE SUPPORT

2

RIDGID 1233 THREADING MACHINE ⁄2"-2" BSP C/W 2 DIE HEADS & PIPE SUPPORT 1

ADDITIONAL DIE HEAD RIDGID

£52.50 £6.00

REX THREADING MACHINE 1⁄2"-4" BSP C/W PIPE SUPPORT

£95.00

RIDGID 1233C THREADING MACHINE 1⁄2"-3" NPT C/W PIPE SUPPORT

£95.00

REX THREADING MACHINE 1⁄2"-4" NPT C/W PIPE SUPPORT

£105.00

MACHINE GUARDS

£6.00

46 PIPE SUPPORT

£8.00

965/RJ98 PIPE SUPPORT/PIPE ROLLER 4"-12"

£8.00

DRIP TRAY (FOR USE UNDER MACHINES TO PROTECT FLOORS ETC)

£5.00

NIPPLE CHUCK

£12.50

141 RECEDER 2 ⁄2"-4"

£30.00

161 RECEDER 4"-6"

£40.00

1

HAND HELD THREADING MACHINES

weekly

RIDGID 690 1⁄2"-2" 110v

£32.00

REMS AMIGO 2

£32.00

1

⁄2"-2" 110v

REMS AMIGO 16-32mm CONDUIT

£32.00

R200 RATCHET HAND DIES UPTO 2"

£20.00

PIPE STILSONS & CHAIN WRENCHES

weekly

14"/24"

£6.00

36"

£7.00

48"

£8.50

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


18

ROLL GROOVING EQUIPMENT

weekly

RIDGID 918 HYDRAULIC GROOVER SUPPLIED 2"-6"

£40.00

RIDGID 918 HYDRAULIC GROOVER SUPPLIED 8"-12"

£40.00

RIDGID 918 STABILIZER KIT

£11.50

RIDGID 916 PORTABLE ROLL GROOVER 1 "-6"

£30.00

RIDGID 916 PORTABLE ROLL GROOVER 1" ONLY

£40.00

RIDGID 916 PORTABLE ROLL GROOVER 2"- 6" COPPER

£40.00

RIDGID 915/914 PORTABLE ROLL GROOVER 2"- 6"

£40.00

RIDGID 975 COMBO INSITU ROLL GROOVER 1 ⁄4" – 6"

£40.00

RIDGID 915 INSITU PORTABLE ROLL GROOVER ROLLERS 11⁄4"- 11⁄2"

£40.00

RIDGID 918 GROOVER, POWER DRIVE & PIPE SUPPORT

£62.00

RIDGID HC450 HOLE CUTTER FOR MECHANICAL TEES

£62.00

1⁄ 4

1

ROLL GROOVING EQUIPMENT

weekly

VICTAULIC 272SFS ROLL GROOVING M/C 2"-8"*

£88.00

ABOVE SUPPLIED WITH 300C POWER DRIVE AND TRISTAND

£110.00

VICTAULIC VE416 FSD 2"-12" OGS PIPE

£265.00

VICTAULIC VE416 FSD 14"-16" AGS PIPE

£265.00

RX ROLLER SET S/STEEL SCH 10 AND BELOW ⁄4"- 12"

£38.00

RX ROLLER SET CARBON SCH 10 AND BELOW 3⁄4"- 12"

£38.00

COPPER ROLLER SET FOR BRITISH STANDARD COPPER 2"-8"

£38.00

AGS ROLLER SET 14"-16" FOR USE ON VE416 FSD

£88.00

3

*VE272SFS permitted for roll grooving thin wall carbon steel pipe 2"-12"

www.broughtonplanthire.co.uk


19

PRESSURE/PIPE TESTING (*Calibrated gauges available as sale items)

weekly

3.5 CFM COMPRESSOR 115 psi C/W HOSE & 1⁄2" BSP BUSH

£27.50

7.5 CFM COMPRESSOR 115 psi C/W HOSE & ⁄2" BSP BUSH

£35.00

8 CFM COMPRESSOR 130 psi C/W HOSE & ⁄2" BSP BUSH

£38.00

ELECTRIC WATER TEST PUMP MAX. 50 BAR

£40.00

PETROL WATER TEST PUMP MAX. 50 BAR

£50.00

RIDGID HAND TEST BUCKET MAX. 60 BAR

£18.50

REMS MULTI-PUSH FLUSHING AND PRESSURE TESTER

£85.00

1

1

DRAIN TESTING

weekly

DRAIN BUNGS 1"-6"

£2.00

RUBBER DRAIN TEST BAGS 2"-6"

£4.00 POA

TEST KIT SALE ITEM ONLY

GAS PURGING

weekly

NITROGEN REGULATOR HOSE & 1⁄2" BSP CONNECTION NITROGEN CYLINDER 30 LITRE

Southern Depot : 01708 383350

£16.00 £6.50

Midlands Depot : 01773 609789

South West Depot: 01275 875587


20

POWERED PIPE CUTTERS

weekly

RIDGID 590L 14" DRY CUT SAW

£40.00

RIDGID 550 RECIPROCATING SAW 1⁄2"-6"

£30.00

FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP

£75.00

RIDGID 258 HYDRAULIC/POWERED PIPE CUTTER 21⁄2"-8"

£58.00

RIDGID 258XL HYDRAULIC/POWERED PIPE CUTTER 8"-12"

£58.00

REMS DUE CENTO 2"-8"

£58.00

MANUAL PIPE CUTTERS

weekly

RIDGID 2A PIPE ROLLER CUTTER 1⁄2"-2"

£6.50

RIDGID 4S PIPE ROLLER CUTTER 2 ⁄2"-4"

£12.50

RIDGID 6S PIPE ROLLER CUTTER 4"-6"

£15.00

RIDGID 466 HINGED FOUR WHEEL CUTTERS 4"-6"

£40.00

RIDGID 468 HINGED FOUR WHEEL CUTTERS 6"-8"

£45.00

RIDGID 472 (868) HINGED FOUR WHEEL CUTTERS 8"-12"

£48.00

1

RIDGID 154 4" COPPER CUTTERS

£9.50

RIDGID 156 6" COPPER CUTTERS

£15.50

RIDGID STUD CUTTER 8mm

£12.00

RIDGID STUD CUTTER 10mm

£12.00

ORBITAL CUTTERS

weekly

SCORP CUTTER 1"-8" 110v SQUARE CUT

£62.50

SCORP CUTTER 8"-14" 110v SQUARE CUT

£85.00

GF CUT AND BEVEL MACHINE RA4 ⁄2"-4" C/W BENCH

£90.00

GF CUT AND BEVEL MACHINE RA6 2"-6" C/W BENCH

£120.00

1

1

AXXAIR CUTTER 4" C/W BENCH ⁄4”-4 ⁄2”

£90.00

AXXAIR CUTTER 6" C/W BENCH ⁄4”-6”

£120.00

AXXAIR CUTTER 8" C/W BENCH 2”-8”

£150.00

1 1

www.broughtonplanthire.co.uk


21

PIPE BENDING

weekly

HYDRAULIC 1⁄2"-2"

£48.00

HYDRAULIC ⁄2"-3"

£60.00

1

RIDGID 3813C ⁄2"- 3" ELECTRIC 110v BENDER

£105.00

TUBELA ROTARY SCISSOR BENDER 15-54mm CARBON STEEL / COPPER

£115.00

1

TUBELA 15-54mm RATCHET ASSISTED COPPER BENDER

£85.00

HILMOR 15-35mm STAND BENDER

£28.00

HILMOR 15-42mm STAND BENDER

£32.00

HILMOR 16-25mm CONDUIT BENDER

£18.00

HILMOR 15-22mm SCISSOR BENDER

£10.00

REMS CURVO 15-28mm 110v BENDER

£50.00

REMS CURVO 50 110v 14-50mm / MULTI-LAYER COMPOSITE PIPE

£50.00

REMS PYTHON HYDRAULIC 40-63mm / MULTI-LAYER COMPOSITE PIPE

£58.00

BENCHES/VICES

weekly

RIDGID 1400 WORK BENCH C/W CHAIN VICE (4" OR 6") & ENGINEERS VICE

£12.50

RIDGID 560 HORSE BENCH 5" CAPACITY

£7.50

RIDGID 450 TRIPOD VICE 5" CAPACITY

£9.00

RIDGID 460 TRIPOD VICE 6" CAPACITY

£9.00

WELDING CLAMPS/VICES

£12.00

ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE

£27.50

PIPE FREEZERS

weekly

FREEZE MASTER ELECTRIC 110v

15mm-42mm

£48.00

FREEZE MASTER ELECTRIC 110v

15mm-60mm

£64.00

EXPANSION KIT

65mm-88mm

£16.00

REMS ESKIMO CO2 KIT 1⁄8"-2"

10-60mm

£42.00

CO2 GAS

Southern Depot : 01708 383350

POA

Midlands Depot : 01773 609789

South West Depot: 01275 875587


22

COPPER TOOLS

weekly

T60 110v T DRILL 15-54mm

£110.00

MANUAL T DRILL FOR COPPER 15-42mm

CAST IRON TOOLS

£40.00

weekly

RECORD 45 CUTTER UP TO 6"

£34.00

RECORD 45 CUTTER UP TO 12"

£38.00

246 SNAP CUTTER UP TO 6"

£36.00

4" PULLING TOOL

£30.00

6" PULLING TOOL

£36.00

8" PULLING TOOL

£50.00

RIDGID 228 PIPE ASSEMBLY TOOL 2"-8"

£38.00

www.broughtonplanthire.co.uk


23

HDPE JOINTING

weekly

BUTT WELDING MACHINE

40-200mm

£135.00

BUTT WELDING MACHINE

40-315mm

£255.00

BUTT WELDING HAND HELD MACHINE (HOT PLATE) 40-75mm

£40.00

ELECTROFUSION BOX 110v

40-160mm

£60.00

ELECTROFUSION BOX 110v

40-315mm

£68.00

FUZE HDPE

weekly

REMS BUTT WELDING MACHINE

40-160mm

£135.00

REMS BUTT WELDING MACHINE

90-315mm

£255.00

BUTT WELDING HAND HELD MACHINE (Hot Plate) 40-75mm

£40.00

ELECTROFUSION BOX 110v

40-315mm

£68.00

PE80 FUSION WELDER 40v

16-800mm

£68.00

HPPE (PE100) MDPE FUSION WELDER 40v

32-315mm

£60.00

HPPE (PE100) MDPE FUSION WELDER 80v

315-800mm

£75.00

SOCKET FUSION

weekly

BENCH MACHINE PACK

50-125mm

£155.00

1400w HAND-HELD MACHINE

40-125mm

£55.00

800w HAND-HELD MACHINE

20-63mm

£40.00

JIG KIT FOR INSITU SOCKET FUSION

20-125mm

£125.00

AQUATHERM ELECTROFUSION MACHINE

20-160mm

£68.00

AQUATHERM ELECTROFUSION MACHINE

20-250mm

£85.00

Also includes 1400w Hand-held machine

* Generators for fusion machines available on Page 44

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


24

ELECTROFUSION

weekly

(Now available as data logging)

MDPE FUSION WELDER 40v

£60.00

MDPE FUSION WELDER 80v

£75.00

HPPE (PE100) FUSION WELDER 40v 32-315mm

£60.00

HPPE (PE100) FUSION WELDER 80v 315-800mm

£75.00

BARCODE READER FOR USE WITH MDPE MACHINE

£25.00

HDPE FUSION WELDER AW315 110v 40-315mm (SUITABLE FOR GEBERIT, TERRAIN, AKATHERM)

£68.00

ENFUSION VULCATHENE (FOR CHEMICAL WASTE) UPTO 6"

£68.00

GF PIPING SYSTEMS INSTAFLEX HWSG3 16-225mm

£85.00

ACCESSORIES

weekly

TOP LOADING CLAMP

£12.00

FUSION CLAMP TEE

£25.00

SQUEEZE OFF TOOL MANUAL

20-63mm

£14.00

SQUEEZE OFF TOOL HYDRAULIC

63-180mm

£40.00

RITMO PS180 PEELING TOOL

63-180mm

£47.50

RITMO PS400 PEELING TOOL

110-400mm

£47.50

FRIATEC PEELING TOOL

90-400mm

£47.50

UNIPREP 1 ROTARY SCRAPPING TOOL

110-400mm

£47.50

UNIPREP 2 ROTARY SCRAPPING TOOL

125-500mm

£65.00

PROTECTA-LINE STRIPPING TOOL

90-110mm

£47.50

PROTECTA-LINE STRIPPING TOOL

125-180mm

£47.50

TIN-12 GENERATOR TO SUIT FUSION MACHINE

www.broughtonplanthire.co.uk

£60.00


25

WELDING

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


26

WELDERS

(All sets supplied with 2 x 15m Welding Leads. 415 Welders supplied with 415v 32amp 5 Pin Plugs)

150amp D.C. INVERTER DUAL VOLTAGE 110v 32amp OR 240v 16amp 200amp MULTI VOLTAGE (110v/240v/415v) MILLER DC INVERTER 250amp D.C. INVERTER 240v/415v 32amp 270amp D.C. INVERTER 415v 32amp 400amp D.C. INVERTER 415v 32amp INVERTER REMOTE CONTROL 415v TIG SET 110v/240v TIG SET

WELDER GENERATORS

(All sets supplied with 2 x 15m Welding Leads)

PETROL MOSA DC 150amp Hand Carry PETROL MOSA DC 200amp DIESEL MOSA DC 200amp DIESEL MOSA DC 250amp DIESEL MOSA DC 300amp DIESEL MOSA DC 350amp REMOTE CONTROL

WELDER ACCESSORIES

weekly £45.00 £65.00 £65.00 £65.00 £65.00 £12.00 £90.00 £65.00

weekly £70.00 £82.00 £85.00 £95.00 £105.00 £115.00 £12.00

weekly

15m WELDING LEADS 415v 5-PIN EXT LEADS WELDING SCREEN 2m X 2m ELEPHANT TENT WELDING SHELTER PIPE ROLLER STANDS UP TO 10" ADJUSTABLE PIPE STAND UP TO 16" FUME EXTRACTOR C/W 5M FLEXI DUCT FUME ELIMINATOR FILTRATION EXTRACT LINCOLN MOBIFLEX FILTRATION FUME EXTRACTOR / 735 CFM AIRFLOW FIRE EXTINGUISHERS, CO2 WATER, DRY POWDER ROD QUIVER WELDING CLAMP BARREL PUMP JERRY CAN 205L DIESEL DRUM BARREL BUND

www.broughtonplanthire.co.uk

£5.50 £12.00 £8.00 £26.00 £8.00 £36.00 £32.00 £42.00 £80.00 £7.50 £8.00 £8.00 £3.00 £2.50 POA £12.00


27

PROPANE EQUIPMENT

weekly

PROPANE TORCH KIT & CYLINDER

£8.00

PROPANE TORCH

£5.50

LEAD MELTING POT LADLE & FURNACE

£36.00

OXY/PROPANE CUTTING & HEATING KIT

£36.00

OXY/ACETYLENE EQUIPMENT

weekly

LEAD BURNING KIT

£33.00

CUT & WELD KIT

£33.00

OXY/PROPANE CUTTING & HEATING KIT

£36.00

PORTA PACK CYLINDER TROLLEY CYLINDER SIZE X + M

£5.50

MID SIZE CYLINDER TROLLEY CYLINDER SIZE Y + J

£5.50

FULL SIZE CYLINDER TROLLEY CYLINDER SIZE W + F

£5.50

CYLINDER HIRE

weekly

OXYGEN 10ltr

£6.50

OXYGEN 30ltr

£6.50

ACETYLENE 10ltr

£6.50

ACETYLENE 30ltr

£6.50

ARGON 30ltr

£6.50

NITROGEN 30ltr

£6.50

CO2 VAPOUR 10ltr

£4.50

CO2 LIQUID FREEZE 10ltr

£4.50

PROPANE 3.9kg

£4.50

PROPANE 18kg

£6.50

*All Gas contents for the above cylinders POA

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


28

ACCESS EQUIPMENT

www.broughtonplanthire.co.uk


29

MOBILE TOWERS

(All available with 500mm & 250mm Rung Centres in 3T and AGR) (All available in the following base sizes: 1450x2.5m 1450x1.8m 850x2.5m 850x1.8m)

weekly

PLATFORM HEIGHT

1.7m

WORKING HEIGHT

3.7m

OVERALL HEIGHT 2.530m

£25.00

PLATFORM HEIGHT

2.2m

WORKING HEIGHT

4.2m

OVERALL HEIGHT 3.030m

£25.00

PLATFORM HEIGHT

2.7m

WORKING HEIGHT

4.7m

OVERALL HEIGHT 3.680m

£28.00

PLATFORM HEIGHT

3.2m

WORKING HEIGHT

5.2m

OVERALL HEIGHT 4.180m

£29.00

PLATFORM HEIGHT

3.7m

WORKING HEIGHT

5.7m

OVERALL HEIGHT 4.530m

£36.00

PLATFORM HEIGHT

4.2m

WORKING HEIGHT

6.2m

OVERALL HEIGHT 5.030m

£42.00

PLATFORM HEIGHT

5.2m

WORKING HEIGHT

7.2m

OVERALL HEIGHT 6.180m

£58.00

PLATFORM HEIGHT

6.2m

WORKING HEIGHT

8.2m

OVERALL HEIGHT 7.030m

£70.00

PLATFORM HEIGHT

6.7m

WORKING HEIGHT

8.7m

OVERALL HEIGHT 7.680m

£75.00

PLATFORM HEIGHT

7.2m

WORKING HEIGHT

9.2m

OVERALL HEIGHT 8.180m

£80.00

PLATFORM HEIGHT

7.7m

WORKING HEIGHT

9.7m

OVERALL HEIGHT 8.530m

£85.00

PLATFORM HEIGHT

8.2m

WORKING HEIGHT

10.2m OVERALL HEIGHT 9.030m

£90.00

PLATFORM HEIGHT

8.7m

WORKING HEIGHT

10.7m OVERALL HEIGHT 9.680m

£95.00

PLATFORM HEIGHT

9.2m

WORKING HEIGHT

11.2m OVERALL HEIGHT 10.180m

£100.00

PLATFORM HEIGHT

9.7m

WORKING HEIGHT

11.7m OVERALL HEIGHT 10.530m

£105.00

PLATFORM HEIGHT

10.2m

WORKING HEIGHT

12.2m OVERALL HEIGHT 11.030m

£110.00

PLATFORM HEIGHT

10.7m

WORKING HEIGHT

12.7m OVERALL HEIGHT 11.680m

£120.00

PLATFORM HEIGHT

11.2m

WORKING HEIGHT

13.2m OVERALL HEIGHT 12.180m

£130.00

PLATFORM HEIGHT

11.7m

WORKING HEIGHT

13.7m OVERALL HEIGHT 12.530m

£140.00

PLATFORM HEIGHT

12.2m

WORKING HEIGHT

14.2m OVERALL HEIGHT 13.030m

£150.00

CANTILEVER TOWERS

weekly

VARIOUS SIZES AVAILABLE

POA

STAIRDECK-STAIRWAY TOWER

(Base Size 700x1500mm)

weekly

PLATFORM HEIGHT

2.8m

£65.00

PLATFORM HEIGHT

4.3m

£85.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


30

DEALING DESK TOWERS (Allows Access over desks, Machinery etc.)

weekly

2.2m PLATFORM HEIGHT

850mm WIDE X 3.6m LONG

£52.00

2.2m PLATFORM HEIGHT

850mm WIDE X 2.5m LONG

£45.00

2.2m PLATFORM HEIGHT

850mm WIDE X 1.8m LONG

£45.00

MONKEY TOWER MINI (Desk surfer)

weekly

WORKING HEIGHT UPTO 3.9m

£90.00

FOLDEASY TOWER

weekly

0.8m X 1.8m

PLATFORM HEIGHT

1.5m

£25.00

0.8m X 1.8m

PLATFORM HEIGHT

2.2m

£25.00

PODIUM STEPS (Standard or PAS 250 complient)

weekly

PD500

PLATFORM HEIGHT

0.5m

£16.00

PD5

PLATFORM HEIGHT

0.9m

£16.00

PD

PLATFORM HEIGHT

1.165m

£18.00

PD2

PLATFORM HEIGHT

1.5m

£20.00

PD3

PLATFORM HEIGHT

1.8m

£22.00

SHERPASCOPIC HEIGHT ADJUSTABLE PLATFORM STEPS

weekly

4-6 Tread

1.06-1.52m PLATFORM ADJUSTABLE

£20.00

7-9 Tread

1.77-2.23m PLATFORM ADJUSTABLE

£24.00

6 Tread

1.52m PLATFORM FIXED

£20.00

BUILDERS STEPS

weekly

Class 1 aluminium

8 tread

OPEN HEIGHT

1.95m

£6.50

Class 1 aluminium

10 tread

OPEN HEIGHT

2.44m

£8.00

Class 1 aluminium

12 tread

OPEN HEIGHT

2.93m

£10.00

Class 1 fibreglass

6 tread

OPEN HEIGHT

1.65m

£11.50

Class 1 fibreglass

8 tread

OPEN HEIGHT

2.20m

£12.80

Class 1 fibreglass

10 tread

OPEN HEIGHT

2.74m

£14.00

www.broughtonplanthire.co.uk


31

PLATFORM STEPS

(Complete with two handrails)

weekly

5 Tread

1.3m PLATFORM

£10.00

6 Tread

1.56m PLATFORM

£12.00

8 Tread

2.08m PLATFORM

£14.00

10 Tread

2.59m PLATFORM

£16.00

COMBINATION LADDER

(Use as extended steps or extension ladder)

weekly

2.1m

CLOSED HEIGHT

Extended Steps max 3.5m

£16.00

2.7m

CLOSED HEIGHT

Extended Steps max 4.2m

£18.00

3m

CLOSED HEIGHT

Extended Steps max 4.8m

£19.50

3.5m

CLOSED HEIGHT

Extended Steps max 5.6m

£21.00

EXTENSION LADDERS

weekly

2.3m Double

EXTENDED HEIGHT

4m

£14.00

2.3m Treble

EXTENDED HEIGHT

5.8m

£16.00

3m Double

EXTENDED HEIGHT

5.4m

£14.00

3m Treble

EXTENDED HEIGHT

7.3m

£20.00

3.5m Double

EXTENDED HEIGHT

6.2m

£16.00

3.5m Treble

EXTENDED HEIGHT

8.5m

£26.00

4m Treble

EXTENDED HEIGHT

10.3m

£34.00

ROOF LADDER

£12.00

LIGHTWEIGHT STAGING “YOUNGMAN BOARD"

weekly

10’

3m

£6.00

12’

3m

£7.00

14’

4.5m

£8.00

16’

5m

£10.00

18’

5.4m

£13.00

20’

6.3m

£15.00

Guard Rail System per 3m

Southern Depot : 01708 383350

£10.00

Midlands Depot : 01773 609789

South West Depot: 01275 875587


32

POWERED ACCESS

www.broughtonplanthire.co.uk


33

PUSH AROUND VERTICAL (PAV)

weekly

MODEL

MAX PLATFORM MAX WORKING WEIGHT KG

Pop Up

1.63m

3.63m

280

£70.00

Pop Up Push 8 Pro

2.5m

4.5m

370

£95.00

Youngman X3

2.5m

4.5m

349

£95.00

Youngman X3X

3.2m

5,2m

390

£110.00

Power Tower Nano

2.5m

4.5m

285

£95.00

Power Tower Power Tower

3.1m

5.1m

342

£110.00

Genie AWP 25

7.56m

9.56m

263

£165.00

Peco lift

1.5m

3.5m

180

£75.00

Eco lift

2.2m

4.2m

305

£95.00

SELF PROPELLED

weekly

MODEL

MAX PLATFORM MAX WORKING WEIGHT KG

Power Tower Nano SP

2.5m

4.5m

478

£210.00

Genie GS1932

5.79m

7.79m

1,498

£165.00

Snorkel S1930

5.6m

7.6m

1,650

£165.00

Genie GS2032

6.10m

7.90m

1,825

£190.00

Genie GS2632

7.92m

9.92m

2,002

£295.00

Genie GS2646

7.92m

9.92m

2,447

£325.00

Genie GR15

4.47m

6.47m

994

£165.00

Genie GR20

6.02m

8.02m

1,112

£210.00

ACCESSORIES

weekly

FULL BODY C/W RESTRAINT LANYARD

£15.00

POWER TOWER PIPE CARRIER

£12.50

GENIE 1932, 2632, 2646 PIPE CARRIER

£24.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


34

HANDLING & LIFTING

www.broughtonplanthire.co.uk


35

GENIE LIFTS

weekly

GL10 3.56m MAX LIFT SWL 159kg SUMNER CONTRACTOR LIFT 24/12 - 3.7m MAX LIFT SWL 180kg SL10 3m MAX LIFT SWL 450kg SL12 3m MAX LIFT SWL 295kg SL15 5m MAX LIFT SWL 360kg SL18 5.4m MAX LIFT SWL 295kg SL20 6m MAX LIFT SWL 363kg SL24 7.3m MAX LIFT SWL 290kg SL25 7.9m MAX LIFT SWL 295kg GENIE FORK EXTENSIONS PER PAIR (N.B. Will decrease load capacity) PIPE CRADLES PER PAIR

£80.00 £80.00 £85.00 £85.00 £95.00 £95.00 £115.00 £125.00 £125.00 £12.00 £12.00

PORTABLE TELESCOPIC GAS HOIST

weekly

GH38 3.8m MAX LIFT SWL 136Kg GH56 5.6m MAX LIFT SWL 113Kg CO2 10ltr vapour cylinder Contents for 10ltr CO2 vapour cylinder

£105.00 £125.00 £4.50 POA

ROUST-A-BOUT

weekly

R150 4.6m MAX LIFT SWL 680kg R250 7.6m MAX LIFT SWL 680kg EXTENSION TEE & HEAD

£105.00 £175.00 £32.00

SHEER LEGS (Extendable)

weekly

SWL 1 Ton

£115.00

MAN RIDING TRIPOD Portable Retrival System for Personnel Working below ground TRIPOD C/W WINCH & HARNESS MAN SAFE SAFETY HARNESS RESTRAINT FOR ROOF

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

weekly £175.00 £195.00

South West Depot: 01275 875587


36

CHAIN BLOCKS

weekly

⁄2 TON UP TO 6m LIFT

£30.00

1

⁄2 TON UP TO 30m LIFT

£45.00

1 TON UP TO 6m LIFT

£30.00

1 TON UP TO 30m LIFT

£45.00

2 TON UP TO 10m LIFT

£45.00

1

⁄4 / 11⁄2 TON PULL LIFT/LEVER HOIST

£25.00

3

⁄2 / 1 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp

£95.00

1

⁄2 / 1 TON ELECTRIC HOIST UP TO 50m LIFT 110v 32amp

£120.00

2 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp

£125.00

1

PORTABLE HANDLING

weekly

PALLET TRUCKS 2 TON STANDARD

£28.50

PALLET TRUCK EXTENDED FORK 2 TON

£48.00

PALLET TRUCK HIGH LIFT 1 TON

£64.00

FLOOR CRANE 1000 KILO

£54.00

COUNTER BALANCE FLOOR CRANE 500kg

£105.00

NYLON MACHINE SKATES (PER 3)

£54.00

PIPE BOGEY

£12.50

CRICKET PIPE BOGEY

£16.50

FLAT BED TROLLEY (VARIOUS SIZES AVAILABLE)

£22.00

SACK BARROW

£8.50

SKOOT HYDRAULIC SACK BARROW 2 TON (PAIR G STRAP) STAIR CLIMBING SACK BARROW

£120.00 £12.50

BATTERY POWERED STAIR CLIMBER 330kg

£135.00

BATTERY POWERED STAIR CLIMBER 310kg

£130.00

BATTERY POWERED STAIR CLIMBER 190kg

£125.00

MANHOLE LIFT CRADLE

£95.00

SMALL PLASTERBOARD TROLLEY

£16.50

LARGE PLASTERBOARD TROLLEY

£22.50

DRY WALL PANEL LIFTER

£45.00

www.broughtonplanthire.co.uk


37

HANDLING & LIFTING ACCESSORIES

weekly

FLAT / WEBBED SLINGS (ALL SIZES)

£6.00

GIRDER TROLLEY / CLAMP (ADJUSTABLE)

£12.00

D SHACKLES

£3.50

ROLLING CROW BAR

£12.00

RATCHET CABLE JACKS 16TON

£105.00

CABLE JACKS 3 TON/ 6 TON

£52.00

CABLE ROLLERS

£6.00

NYLON MACHINE SKATES (PER 3)

£54.00

HYDRAULIC JACKS (5 TON)

£32.00

HYDRAULIC JACKS (10 TON)

£49.00

SAFETY HARNESS FULL BODY (VARIOUS LANYARD OPTIONS AVAILABLE)

£15.00

INERTIA REEL UP TO 10m

£35.00

INERTIA REEL UP TO 20m

£40.00

ROOF MAN ANCHOR

£85.00

A FRAME GANTRY (6’6" to 10’ Adjustable underside of Beam)

weekly

A. FRAME (1 & 2 TON CAPACITY)

1.5m BEAM

£95.00

A. FRAME (1 & 2 TON CAPACITY)

2.0m BEAM

£110.00

A.FRAME (1 & 2 TON CAPACITY)

3.0m BEAM

£125.00

A. FRAME (1 & 2 TON CAPACITY)

4.0m BEAM

£140.00

WINCH

weekly

TIRFOR WINCH C/W 30m WIRE ROPE (800kg OR 1600kg)

£40.00

MINIFOR 110v C/W 50m WIRE ROPE (300kg SWL) TR30 (WT 21KG)

£145.00

MINIFOR 110v C/W 50M WIRE ROPE (500kg SWL) TR50 (WT 32kg)

£165.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


38

DRILLING

www.broughtonplanthire.co.uk


39

HILTI RANGE

weekly

TE2 110v ROTARY HAMMER DRILL SDS 12mm Concrete 16 m/s2

£16.00

TE7 110v ROTARY HAMMER DRILL SDS max 12mm Concrete 11ms2

£20.00

TE4A CORDLESS ROTARY HAMMER DRILL SDS 22v 12mm Concrete 11m/s2

£28.00

TE6A CORDLESS ROTARY HAMMER DRILL SDS 36v 16mm Concrete 11m/s2 SFH22A CORDLESS HAMMER DRILL DRIVER 22v 14mm Concrete NB only gives steel HAV rating at 2.5m/s2 TE60ATC 110v BREAKER SDS 40mm Concrete 11 m/s2 SIW14 IMPACT WRENCH CORDLESS 18v Up to 10mm max SIW22A IMPACT WRENCH CORDLESS 22v Up to 10mm max SID14 IMPACT DRIVER CORDLESS 18v Up to 10mm max SID22A IMPACT DRIVER CORDLESS 22v Up to 10mm max TEDRS6 DUST REMOVAL SYSTEM TO SUIT TE7 AND TE6A

£30.00

HAMMER DRILLS 110v

£20.00 £65.00 £28.00 £28.00 £18.00 £20.00 £12.50

weekly

GBH 2 SDS HAMMER DRILL 20mm CONCRETE 16 m/s2

£14.00

GBH 3 SDS HAMMER DRILL 28mm CONCRETE 13m/s2

£18.00

GBH 4 SDS HAMMER DRILL 32mm CONCRETE 12m/s2

£24.00

GBH 5 SDS MAX COMBI HAMMER 40mm CONCRETE 12.8 m/s2

ROTARY DRILLS

weekly

13mm PERCUSSION DRILL 15 m/s2

£14.00

10mm CHUCK ANGLE DRILL

£16.00

13mm CHUCK ANGLE DRILL

£18.00

ROTARY DRILL AND PEDESTAL STAND

£32.00

ROTOBROACH

weekly

PUMA 30mm DIA 25MM DEPTH

£50.00

PANTHER 40mm DIA 50mm DEPTH

£60.00

COBRA 65mm DIA 50mm DEPTH

£70.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


40

DRY DIAMOND CORE DRILLING VAR. SPEED DRILL 8406 13mm CHUCK

CORE DRILLS

weekly £24.00

weekly

ALL SIZES AVAILABLE (SALE ONLY)

CONCRETE BREAKING

POA

weekly

LIGHT DUTY BREAKER SDS MAX

£30.00

MEDIUM DUTY BREAKER 950

£34.00

HEAVY DUTY BREAKER

£42.00

POINTS/CHISELS

£2.50

IMPACT WRENCH

weekly

110v 1⁄2" SQ DRIVE 12 - 32mm

£20.00

110v 3⁄4" SQ DRIVE 12 - 36mm

£22.00

IMPACT SOCKETS AVAILABLE

POA

CORDLESS DRILLING & FIXING

weekly

14/18v 13MM CHUCK COMBI DRILL

£18.00

18v 10mm CHUCK ANGLE DRILL

£18.00

18v IMPACT DRIVER

£16.00

18v IMPACT WRENCH ⁄2" SQ DRIVE

£18.00

24v CORDLESS HAMMER DRILL SDS PLUS

£24.00

36v CORDLESS HAMMER DRILL SDS PLUS

£26.00

1

www.broughtonplanthire.co.uk


GRINDING & CUTTING

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

41

South West Depot: 01275 875587


42

GRINDING & CUTTING

weekly

4" & 41⁄2" MINI GRINDER

£8.50

41⁄2" 18v CORDLESS GRINDER

£18.00

5" ANGLE GRINDER

£15.00

7" ANGLE GRINDER

£15.00

9" ANGLE GRINDER

£15.00

12" PETROL SAW

£40.00

JIGSAW

£16.00

18v CORDLESS JIGSAW

£24.00

FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP

£75.00

RECIPROCATING SHARK SAW

£22.00

18v CORDLESS SHARK SAW

£24.00

14" 2414 CHOP SAW

£20.00

BAND SAW MA615

£105.00

CROSS CUT MITRE SAW

£48.00

270mm CIRCULAR SAW

£20.00

NIBBLER 110v JN1601 1.6mm CAPACITY

£25.00

NIBBLER 110v JN3200 3.2mm CAPACITY

£30.00

RIDGID 590L DRY CUT SAW 5" CAPACITY

£40.00

MAKITA 18v CIRC METAL CUT SAW (136mm BLADE)

£26.00

RIDGID STUD CUTTER M8 OR M10

£12.00

HITACHI CORDLESS STUD CUTTER M10

£30.00

ARMORGARD CUTTING STATION (does not include chopsaw)

£46.00

Blades for the above tools sold seperately POA

PLASMA CUTTERS (Requires compressor 8cfm)

weekly

415v PC60 CUTTER

£115.00

415v PC105 CUTTER

£140.00

9CFM COMPRESSOR 110v 32amp

£38.00

www.broughtonplanthire.co.uk


43

SITE SERVICES

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


44

SITE SECURITY & STORAGE SITE BOX 1m x 480 x 480 SITE BOX 1.2m x 600 x 600 SITE CHEST 1.52m x 860 x 760 SITE CHEST 1.52m x 1.2 x 800 CHEMICAL STORE ARMORGARD BARRO BOX ARMORGARD SITESTATION ARMORGARD POWERSTATION ARMORGARD ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE

weekly £12.00 £12.00 £16.00 £16.00 £28.00 £12.00 £49.00 £29.50 £27.50

All above can be supplied with fitted castors

ARMOURGUARD CUTTING STATION (does not include chopsaw) BOTTLE CAGES 1800 x 850 x 850 BOTTLE CAGES COLLAPSABLE SITE SECURITY FENCING PER PANEL SECTIONAL STEEL SITE HUTS MOBILE STORAGE CAGE 1800 x 1200 MOBILE FITTINGS STORE DOUBLE FITTINGS STORE COPPER COFFIN 3m COPPER COFFIN 6m

MOBILE PIPE RACKS

£46.00 £16.00 £18.50 £3.90 POA £22.00 £16.00 £20.00 £15.00 £25.00

weekly

1 TON CAPACITY 3m - FOLDING PIPE RACK

£26.00

2 TON CAPACITY 3m - 2 PIECE COLLAPSABLE 3.2 TON CAPACITY 6m - 3 PIECE COLLAPSABLE

£26.00 £34.00

GENERATORS

weekly

2.7 KVA PETROL 3.4 KVA PETROL 5 KVA PETROL 4 KVA DIESEL 6 KVA DIESEL 7 KVA DIESEL SUPER SILENCED 10 KVA DIESEL SUPER SILENCED TIN 12 SPEC BRUSHLESS GENERATOR FOR USE WITH ELECTRO FUSION MACHINE JERRY CAN 205lt DIESEL DRUM www.broughtonplanthire.co.uk

£38.00 £46.00 £62.00 £62.00 £75.00 £80.00 £95.00 £60.00 £2.50 SALE ONLY


45

TRANSFORMERS

weekly

3 KVA PORTABLE TWIN 16amp 110v 5 KVA PORTABLE TWIN 16amp 110v + SINGLE 32amp 5 KVA, SINGLE PHASE 10 KVA, SINGLE OR THREE PHASE 3.5v KVA STEP UP 110V TO 240v 16amp TRANSFORMER

EXTENSION LEADS

£6.50 £9.50 £14.00 £20.00 £16.50

weekly

2.5mm CABLE 14m 110v 16amp 4mm CABLE 14m 110v 32amp 3 PHASE 415v 32amp 15m SPIDER BOX 110v 16amp

£3.00 £4.50 £10.50 £3.50

SITE LIGHTING

weekly

FESTOON LIGHTING PER 25m FLUORESCENT TASK LIGHT 1.2m ON STAND FLUORESCENT LINK LIGHT 600mm ON FLOOR STAND FLUORESCENT EMERGENCY BACK UP LIGHT ECO LIGHT 110v SUPALITE K9 PORTABLE WORK LIGHT

PUMPS

£6.50 £6.50 £6.50 £12.50 £7.50 £25.00

weekly

110v 2" SUBMERSIBLE 50 GPM 110v 1" PUDDLE PUMP / SUBMERSIBLE PETROL TRASH PUMP 3" INLET/OUTLET TRANSFER PUMP 110v REMS SOLAR PUSH K60 FLUSHING CLOSED SYSTEMS

£40.00 £40.00 £90.00 £40.00 £58.00

C/W CHANGEOVER VALVE

VACUUM CLEANERS

weekly

DRY / WET VAC SINGLE MOTOR 110v 16AMP

£32.00

DRY / WET VAC TWIN MOTOR 110v 32AMP

£42.00

LASER LEVEL

weekly

Lasermark LM800 Dual Grade

Southern Depot : 01708 383350

£65.00

Midlands Depot : 01773 609789

South West Depot: 01275 875587


ELECTRICAL CABLE CRIMPING & CUTTING


47

CRIMPING TOOLS

weekly

Manual hydraulic crimping tool HT131-C For use on Copper lugs

10-400 mm2

£95.00

Hydraulic crimping head c/w foot pump ECW-H3D For use on Copper lugs

10-630 mm2

£165.00

Cordless 18 volt crimping tool Ridgid RE60 For use on Copper lugs

10-300 mm2

£95.00

CUTTING TOOLS

weekly

Hydraulic cutting tool HT-TC051 For cutting standard copper or aluminium cable to maximum diameter of 50mm

£55.00

Hydraulic cutting tool HT-TC0851 For cutting standard copper or aluminium cable to maximum diameter of 85mm

£85.00

Hydraulic cutting head c/w foot pump TC120 120mm max For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm

£130.00

Hydraulic cutting head (no foot pump) TC 120 For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm

£85.00

Cordless 18 volt cutting tool Klauke For cutting standard copper or aluminium cable to maximum diameter of 45mm

£60.00

Cordless 18 volt cutting tool B-TC500E For cutting standard copper or aluminium and telecommunication cable to maximum diameter of 50mm

£65.00

Cordless 18 volt cutting tool B-TC950 For cutting standard copper or aluminium and telecommunication cable to maximum diameter of 95mm

£85.00

Southern Depot : 01708 383350

Midlands Depot : 01773 609789

South West Depot: 01275 875587


INDEX

page

A A frame gantry Acetylene Cylinder Angle Drill Angle Grinder Axxair Cutter Aquatherm socket fusion

37 27 39 42 20 23

B Barrel Bund Barrel Pump Band-saw Benches and vices Bottle Cages Builders Steps Barro Box

26 26 42 21 44 30 44

C Cable Crimping/Cutting 47 Cable Jacks 37 Cantilever Towers 29 Cast iron tools 22 Cembre Hydraulic Crimping Tool 47 Chain Blocks 36 Chain Wrenches 17 Chemical Store 44 Chop Saw 42 Combination Ladder 31 Compressor 19 Concrete Breaking 40 Cordless Angle Grinder 18v 42 Cordless Drilling Fixing 40 Conex Banninger B Press 13 Copper Cutters 20 Copper Coffins 44 Copper tools 22 Cordless Shark Saw 42 Core Drills 40 Counter Balance Floor Crane 36 Cross Cut Mitre Saw 42 Cut & Weld Kit 27 Cutting Station 42, 44

D D Shackles Dealing Desk Towers Diesel 205L Drum Drain Bungs Drain Testing Drip Tray Dry Diamond Core Drilling Dry Cut Saw 14" Dry Vac Due Cento

37 30 44 19 19 17 40 42 45 20

E Electro Fusion Machine Enfusion Electrical Cable Crimping & Cutting Electric 110v Bender Extension Ladder Extension Leads Eco Lift

24 24 47 21 31 45 33

F Festoon Lighting Fire Extinguisher Flat Bed Trolley Floor Crane Fluorescent Emergency Back up Light Fluorescent Link Light Fluorescent Task Light Foldeasy Towers Full Size Cylinder Trolley Fume Eliminator Filtration Extract Fume Extractor

45 26 36 36 45 45 45 30 27 26 26 26

Fusion Accessories Fusion Clamps Fusion Machine 5 kva Generator

page 24 24 24

G Gas purging Geberit HDPE Geberit Mapress Carbon Geberit Mapress Copper Geberit Mepla Genie GR Series Genie Material Lifts Genie Lift - Pipe Holding Kit Genie Scissor Lifts Generators GF Cut and Bevel Machine Girder Trolley / Clamp

19 23 6 5 7 33 35 33 33 44 20 37

H Hammer Drills Handling and lifting accessories Hand held threading machines Hilmor Stand Bender Hilmor Conduit Bender Hilmor Scissor Bender Hilti Range Horse Bench Hydraulic Cutting Tool Hydraulic Jacks

39 37 17 21 21 21 39 21 47 37

I Impact Wrench Inertia Reel Inverter Remote Control Inverter Welder

40 37 26 26

J Jerry Can Jigsaw

44 42

L Laser Level Lead Burning Kit Lead Melting Pot Ladle & Furnace Lighting Lightweight Staging Lincoln Mobiflex extractor

45 27 27 45 31 26

M Machine Guards Manual Pipe Cutters Man Riding Tripod Makita 18V Circ Manhole Lift Cradle Mid Size Cylinder Trolley Miller DC Inverter Minifor Mobile Fittings Store Mobile Pipe Racks Mobile Storage Cage Mobile Towers Monkey Tower Mini

17 20 35 42 36 27 26 37 44 44 44 29 30

N Nibbler Nipple Chuck Nitrogen Cylinders Nylon Machine Skates

42 17 27 37

O Orbital Cutters Oxy/Propane Cutting & Heating kit Oxygen Cylinder

20 27 27

P Pallet Trucks Pannel Lifter

36 36

Petrol Saw 12" Petrol Trash Pump Pipe Assembly Tool Pipe Bending Hydraulic Pipe Bogey Pipe Freezers Pipe Holding Kit (Power Tower) Pipe Roller Stands RJ98 Pipe Stilsons Pipe Support Pipe Threading Pipe Testing Plasterboard Trolley Plasma cutters Platform Steps Podium Steps Points/Chisels Polypipe HDPE Polypipe Presstools Pop Up Products Porta Pack Cylinder Trolley Portable Handling Portable telescopic gas hoist Portastore Powered Pipe Cutters Powerstation - Armorguard Power Tower Products Pressure testing Press system accessories Propane equipment Propane Torch Propane Torch Kit & Cylinder Puddle Pump Pulling Tool Pumps Push around vertical Peco

page 42 45 22 21 36 21 33 17 17 17 17 19 36 42 31 30 40 23 14 33 27 36 35 44 20 44 33 19 15 27 27 27 45 22 45 33 33

R Ratchet Hand Dies Receder Reciprocating Shark Saw Record 45 Rehau Presstools Rems Amigo Rems Curvo 110v Bender Rems Eskimo Freezer Rex Threading Machine Ridgid Threading Machine Ridgid 258 Ridgid 258XL Ridgid 2A Pipe Roller Cutter Ridgid 300c Threading Machine Ridgid 466 Hinged Four Wheel Cutter Ridgid 4S Pipe Roller Cutter Ridgid 550 reciprocating saw Ridgid 690 Ridgid 6S Pipe Roller Cutter Ridgid 868 Hinged Four Wheel Cutters Ridgid 915 Insitu Portable Ridgid 915/914 Portable Roll grooving Ridgid 916 Portable Roll Groover Ridgid 918 Groover, Power Drive Ridgid 918 Hydraulic Groover Ridgid 918 Stabilizer Kit Ridgid 975 Combo Insitu Ridgid Die Head Ridgid Hand Test Bucket Ridgid HC450 Hole Cutter Ridgid RE60 Crimping Tool Rod Quiver Rolling Crow Bar Rolling Work Bench Roustabout

17 17 42 22 14 17 21 21 17 17 20 20 20 17 20 20 20 17 20 20 18 18 18 18 18 18 18 18 17 19 18 47 26 37 44 35

Rotary Drills Rotary Hammer Drill Cordless Roto Broach Rubber Drain Test Bags

page 39 39 39 19

S Sales Items Sack Barrow Safety Harness Sanha Carbon Steel Sanha Copper Sanha Multi Layer Sanha Stainless Steel Self-propelled access SDS Hammer Drill Sectional Steel Site Huts Sherpa Scopic Steps Sheer legs Site Box Site security Site Security Fencing Site Station Site storage Skorp Cutter Slings Snap Cutter Snorkel Squeeze Off Tool Stair Climbing Sack Barrow Stairway Towers STIHL saw Stud Cutter Submersible pump

3 36 37 11 10 11 11 33 39 44 30 35 44 44 44 44 44 20 37 22 33 24 36 29 42 42 45

T Tig set Tirfor Winch Transformers Tripod Vice Tubela Ratchet Bender Tubela Rotary Scissor Bender

26 37 45 21 21 21

U Uponor Multi-Layer

14

V Vacumn cleaners Victaulic Adjustable Pipe Stand Victaulic 272SFS Roll Grooving Victaulic VE416 FSD Viega presstools

45 18 18 18 12

W Water Test Pump Wavin Welder Generators Welders Welding accessories Welding Clamps Welding Leads Welding Screen Welding Shelter Wet Vac Winch Work Benches

19 13 26 26 26 26 26 26 26 45 37 21

Y Pegler Yorkshire Xpress Carbon/stainless Pegler Yorkshire Xpress Copper Pegler Yorkshire Xpress Multi Layer Youngman X3 Series

9 8 9 33


Broughton Plant Hire was formed in 1984 as a trading division of Michael Broughton Ltd Est 1969 and specialises in the hire and sale of plant and equipment to the mechanical, electrical and fire protection industries. Now established in the industry for over 30 years Broughton Plant Hire has a wealth of experience and expertise throughout the business from our engineers and depot staff through to our hire desk and management team. This combined with our commitment to ensure that our customers receive the best service possible and a constant investment in our hire fleet has allowed us to build a reputation in the industry of supplying our customers with quality tools and equipment at short notice. Broughton Plant Hire and Sales has a wide and extensive fleet of small tools, plant and equipment and are the market leaders in the hiring, servicing and maintenance of pressfitting tools. We are an approved tool provider and calibration centre for a number of press fit manufacturers such as Geberit, Pegler Yorkshire, Sanha, Viega, Wavin and IBP Conex. We are also a specialist supplier in low level access and operate and maintain a large fleet of podium steps and push around vertical lifts. We are proud distributors and service agents for the following manufacturers: Ridgid, Novopress, Rems, Power Tower, Youngmans and Armorgard Security Products. We currently have 3 depots located in Essex, the Midlands and Bristol from which we operate a fleet of over 35 vehicles

Head Office; Southern Depot Unit 10 Trade City, Ashton Road, Romford, Essex, RM3 8UJ t: 01708 383350

Midlands Depot

South West Depot

Midlands Depot Unit B1, Venture Crescent, Motorway Lnk Industrial Estate, Alfreton DE55 7RA t: 01773 609789

Southern Depot

South West Depot 31-32 Hither Green Industrial Est. Clevedon, Bristol, BS21 6XU t: 01275 875587


Head Office; Southern Depot Unit 10 Trade City, Ashton Road, Romford, Essex, RM3 8UJ t: 01708 383350 Midlands Depot Unit B1, Venture Crescent, Motorway Lnk Industrial Estate, Alfreton DE55 7RA t: 01773 609789 South West Depot 31-32 Hither Green Industrial Est, Clevedon, Bristol, BS21 6XU t: 01275 875587 e: hire@mbroughtonltd.co.uk www.broughtonplanthire.co.uk

Broughton hire guide 2016/17  
Broughton hire guide 2016/17  
Advertisement