The best way to prevent an electric fire at home According to statistics by the national Fire Protection Association, there are close to 50,000 house fires that are reported every year and which are caused by some type of electrical problems. Some of these fires will cause damage of property, injuries and in some cases fatalities. One way to make sure that your home is safe and that your electrical systems are not creating a risky environment at your home is to make sure that a residential electrician is called every time there is an issue with electricity. It is difficult for anyone else to tell what the real problem could be since electrical fires can be as a result of faulty wiring, cords and plugs, light fixtures and lamps or transformers and power supplies.
The best way to prevent an electric fire at home Prevention of electrical fires may be something as simple as making sure that all electrical systems are in their optimum condition; this is easier said than done. A professional electrical contractor Marietta, GA should be able to conduct some safety inspection on a regular basis where they will look for some telltale signs before they become a serious risk. Some warning signs that cannot be ignored include:
The best way to prevent an electric fire at home Outdated wiring: In general, electrical wiring systems have a lifespan of 30-40 years. The tragic truth however is that there is many buildings whose wiring systems are more than 50 years old. If you live in a home with an outdated wiring system, you will see different signs that ill signal you it is time you called a residential electrician for a check. Some of these signs include fuses blowing off frequently, repeated tripping of circuit breakers or the need to use surge protectors or extension cords. While there may be temporary solutions to such a problem, you stand the risk of an electrical fire unless your electrical contractor Marietta, GA replaces the entire electrical wiring system.
The best way to prevent an electric fire at home Aluminum wiring: Houses that were built in the 1960s and 1970s had aluminum wiring which was a common norm during those days. You need to realize that aluminum oxidizes fast and this easily leads to corrosion. Aluminum wiring may be good in the short term but it has an extremely short lifespan. If you live in a fairly old house where aluminum wiring could have been used there are high chances that corrosion has taken place leaving you vulnerable to an electrical fire; look for an electrical company Marietta, GA to help inspect those wires ASAP. After an electrician inspects the wiring, you may need to have the entire home rewired or the wiring repaired.
The best way to prevent an electric fire at home Arc faults: Arc faults can happen when electric currents veer from their originally intended paths causing a serious risk of electrical house fires. In most cases, these arc faults happen as a result of trees falling on power lines during storms or damaged wiring in your house when you are moving furniture or perhaps a loose connection in an outlet; a residential electrician should be able to offer advice and rectify any problems that arise.
AC/DC Electric Call â€“ 770-884-7358 Visit - www.ac-dc-electric.com