Issuu on Google+


Ballistic Tiles for Walls & Ceilings •

Designed to prevent ricochet of bullets/ projectiles at an incidence angle of ≥ 10º

• Designed as anti-backsplash material - Bullet/projectiles penetrate the rubber tiles and hits a steel or concrete wall behind. - Any backsplash (bullet fragments) will hit the back of the rubber ballistic tile and contain the backsplash •

Made of Recycled Rubber Particles bound by a MDI Polyurethane Binder

• Tested to a complete spectrum of the most common small arms calibres and ammunition used by: - military - enforcement - civilians • Special flame retardants used. - Flammability & Smoke Tested to European EN 13501:2010 Bfl-s1 rating. - Applicable for use with tracer bullets


Ballistic Tiles

TILES


Ballistic Blocks • Designed to entrap bullets - Positioned behind targets - Bullet/projectiles penetrate the rubber block and captured inside. - Block can be orientated in 3 ways, depending on most common weapon systems being used •

Designed to prevent ricochet of bullets/ projectiles at an incidence angle of ≥ 10º

Made of Recycled Rubber Particles bound by a MDI Polyurethane Binder

• Tested to a complete spectrum of the most common small arms calibres and ammunition used by: - military - enforcement - civilians • Special flame retardants used. - Flammability & Smoke Tested to European EN 13501:2010 Bfl-s1 rating. - Applicable for use with tracer bullets


Ballistic Blocks

BLOCKS


Ballistic Seamless Flooring • Designed to prevent build up of gunpowder - Positioned behind targets - Bullet/projectiles penetrate the rubber block and captured inside. - Block can be orientated in 3 ways, depending on most common weapon systems being used •

Designed to prevent ricochet of bullets/ projectiles at an incidence angle of ≥ 10º

Made of Recycled Rubber Particles bound by a MDI Polyurethane Binder, with a layer of seamless polyurethane and matte polyurethane top coat.

Promotes easy cleaning where gunpowder buildup can occur


Ballistic Seamless Flooring

FLOORING


Ballistic Seamless Flooring


Ballistic Fragmentation Sheet •

Designed to reduce backsplash of bullets behind targets, in conjunction with bullet traps

Usually suspended off ceiling and positioned behind targets

Made of Recycled Rubber Particles bound by a MDI Polyurethane Binder

Special flame retardants used. - Flammability & Smoke Tested to European EN 13501:2010 Cfl-s1 rating

F


Ballistic Fragmentation Sheet

FRAG SHEET


Rephouse’s prominent Ballistic References •

US Special Warfare Unit - SEALS Training Facility

Turkish Security Guards Private Training Facility

Aberdeen Proving Grounds Research and Test Laboratory for Munitions

Security Training Range Jet Propulsion Laboratory for NASA

FBI Training Centre at Quantico

Cook County Police Training Academy

Close Quarter Battle (CQB) Training Facility for US PACOM and Thai Special Forces

H.H. Sheikh Sultan Bin Zayed Shooting Range

United Arab Emirates Close Quarter Battle (CQB) Training Facilities

HMAS Cerberus – Australian Navy Training Centre

Location: Damneck, Virginia, USA

Location: Ankara, Turkey

Location: Maryland, USA

Location: Pomona, California, USA

Location: Virginia, USA

Location: Chicago, Illinois, USA

Location: Lopburi, Thailand

Location: Abu Dhabi, United Arab Emirates

Locations: Abu Dhabi, Sharjah, Al-Ain

Location: Melbourne, Australia

R


REFERENCES


Rephouse Recycling. Rephouse products are the product of a comprehensive recycling concept. But what exactly does that mean in practice? It means that all the requirements of recycling are taken into account from the start, in the initial development of the product. One example is careful material selection designed to preserve resources and to ensure efficient recycling compatible with the environment. Each Rephouse product is designed and built for simple economic recycling after its long running life. Since 1990, we have been collecting the know-how required for this purpose, focusing on improving the high standards of quality, performance and environmental care we are known for. Please contact your Rephouse partner on all matters regarding your end-of-life product. They will be happy to help.


web | www.rephouse.com email | info@rephouse.com


Rephouse Ballistic Products Brochure