Page 1

MIG WIRE http://www.dnhsecheron.com/


MIG WELDING TIPS Here is my list of MIG Wire welding tips that I think can make a real difference to you when you are using your wire feed welder.

Welding Consumables

1. Clean materials. You should always work with clean materials. Make sure that the metal you are going to weld is clean and free from anything that can contaminate the weld. Anything like rust particularly heavy rust, old paint, grease and any oils need to be removed before you MIG weld




2. Earth clamp. The Earth clamp is often overlooked when people start having mig welding problems. You've got to understand that when you are welding you are essentially creating a big electrical circuit. Any break in the circuit will cause you troubles. So check your earth clamp to make sure that everything is secure and that the contact points are clean. You might need to touch them up with some sand paper.

Welding Machine




3. Gasless mig wire. It's a known fact that the self shielding flux core wires make a fair amount of welding spatter. One of the best things you can do is to use some anti spatter. It is available in aerosol cans and liquid form where you can fill up a spray bottle and squeeze it on by hand. Another little tip, make sure you get the least toxic stuff available, some of them are pretty bad to your health.



4. Mig welding wire. Use the best possible welding wire that you can get your hands on. There's so much rubbish wire out there in the marketplace that most of the time they do more damage than good. A good mig wire will be accurate in its dimension throughout the whole spool. A decent mig wire will also have a very good copper coating on it. The wire should never go over size either.


5. Mig welding tips. If you're having trouble with bad welds and wire sticking, one area to look at may be the contact tips. With a lot of the cheaper contact tips the internal bore of the hole that the wire has to travel through can be very rough, course and uneven. This can lead to erratic and unstable arcs, wire burn backs, erratic feeding and higher consumable costs.  Sometimes it really does pay just to use genuine parts. 

Article Source: http://EzineArticles.com/2646427


D&H Sécheron is one of the leading welding manufacturers in India. Incepted in 1966, D&H Sécheron is an ISO 9001-2015 certified company that offers a comprehensive range of welding solutions in the form of consumables, equipment's, training and fabrication. Get in touch with us on. D&H Secheron Facebook Twitter Google Plus

Mig wire  

Buy the best MIG wires & welding supplies from D&H Secheron Pvt Ltd. MIG wire process is leading in the development of arc welding process a...

Mig wire  

Buy the best MIG wires & welding supplies from D&H Secheron Pvt Ltd. MIG wire process is leading in the development of arc welding process a...

Advertisement