Page 1

technical information marrakech walls

100% natural and ecological


MARRAKECH WALLS 100% natural and ecological

Introduction Marrakech Walls is a paint for inside use with a subtile, sensual and luxureous look. Marrakech Walls is 100% mineral and eco friendly. The surface is silksoft and very flat with a concrete look. When finished with Pure & Original Lime Soap a soft shine appears. The look is determined by application. Marrakech Walls can be compaired with Tadelakt for both look and application method. In comparison to a colour sample some colour deviation can be possible. This is the natural characteristic of Marrakech Walls and a normal occurance. The colour and characteristic of Marrakech Walls is that this variates due the humidy, surface and application. Always create a test piece first. Paint a wall in once to avoid colour difference, order enough paint to do so. Stir multiple cans of the same colour before you start to avoid colour difference. Most important characteristics • Ready to use • 100% recyclable • Good coverage • Water vapour permeable • No synthentic binders • Bactericidal and antifungal • Very matte • Nonflammable Application •

• • •

Lime plaster Concrete plaster Suction mineral surfaces Absorbent and non-waterproofing surfaces

Preparation Most painting problems derive from bad preparation or application. The surface that you are going to paint should be clean, dry, free of dust and fat. Due to a good surface preparation, you can help the paint system with long-term protection. Be aware: Colour and final appearance vary depending on the suction power of the surface and the manner of application. For a correct display of the colour and effect, always place a test piece. 1. Remove all loose paint layers. 2. Clean already painted surfaces with Pure & Original Super Cleaner. Prey repairing places with Pure & Original WallPrim. Let dry. Apply 1 layer Pure & Original WallPrim on the whole surface. Prey powdery surfaces (without repairing places) with 1 layer Pure & Original WallFix. Prey walls with suction differences with 1 or more layers Pure & Original WallPrim. Option 1: apply a full layer Marrakech Walls. Let dry. Sand the surface with sanding paper 400 or higher. Remove the dust and scrap with the Pure & Original spatula. After this a finish is possible, like the Lime Soap, Italian Wax or Dead Flat Eco Sealer. Option 2: apply the Marrakech Walls in multiple layers. This will create a darker, more clowdy effect. Let dry. Sand with sanding paper 400 or higher. Remove the dust and scrap with the Pure & Original spatula. After this a finish is possible, like the Lime Soap, Italian Wax or Dead Flat Eco Sealer. Surface wood: untreated wood must be sanded and degreased with Pure & Original Super Cleaner. The wood should be sufficiently dry in case of the shrinkage of the wood. You can not apply Marrakech Walls on tropical wood.

For further information you can visit the Pure & Original website. www.pure-original.com

Version 4


MARRAKECH WALLS 100% natural and ecological

Basic information for white paint at 20ºC Specific gravity; 1,4 g/cm³ Coverage per coat; first layer 5 - 7 m²/L, after this it is depending on the application method, final layer +/- 5 - 7 m²/L Drying time; dustfree 2 - 3 hours Repaintable; after min. 8 hours Flashpoint; none PH; +/- 13 EU-limit: VOS class max. 0 gr/l VOS.

A/i.

This

product

Protecting To protect the surface for the influences of water we recomment applying Pure & Original Dead Flat Eco Sealer. Apply at least 2 - 3 layers. The Marrakech Walls must be completely saturated and should not absurb any water. The Marrakech Walls will contain matte, but the colour nuances can reduce. Be aware: Applying the Dead Flat Eco Sealer in too thick or uneven layers can create a white haze, mostly on dark colours. Respect the drying time of 7 days before applying the Pure & Original Dead Flat Eco Sealer.

contains

Keep in original packaging and on a frost free place: 6 months. Marrakech Walls can not be mixed with other paints. Colours can change in time, this is because it is a mineral product. Applying conditions Apply the Pure & Original Marrakech Walls with a brush or roller. Dilution is not needed, the paint must be relatively thick. Stir the paint well, before and during applying.Do not paint in direct sunlight. Paint from a dry surface to a wet and already painted surface. Apply in a relative thick layer. The moment the Marrakech Walls is starting to dry, use the Pure & Original spatula to smooth the paint, crisscross over the paint. The paint must be smoothend everywhere. The more crowded the movements, the more crowdy the effect will be. Stir well and check the colour before painting. Temperatuur: >5°C, <25°C (air, surface and material). Relative humidity: 85% max. Colours Are according to the Pure & Original colour chart. Be aware: Due to the influence of temperature, surface and humidity, colour differences can be obtained from the treated surface. This is typical for Marrakech Walls. The properties of the surface, the kind of object, weather and harmful substances from the atmosphere, can cause early aging. This is typical of the natural material and is therefore not a product defect.

For a decorative effect and lightly washable surface, apply the Pure & Original Lime Soap. This will create a lighty Tadelakt shine and will deepen the colour nuances. Marrakech Walls can also be finished by using Pure & Original Italian Wax. This is a matte wax, which can be polished to create a high gloss. By applying 2 layers Italian Wax, the surface will be lightly washable. Cleaning Clean hands and tools immediately after use with soap and water. Technical advise Not all actual prevalent surfaces and their treatments can be dealt with in this technical information magazine. Therefore, it is advisable to ask your supplier for advice in specific situations. This technical information was compiled after the newest techniques in painting. Liability for general validity of this advise must be rejected, because appliance and working techniques are beyond our influence and major differences in the kind of surface continually need adjustment of procedure according to the insight of a competent user. Security This paint irritates skin and eyes. Please wash carefully with a lot of water and consult a doctor in case of contact. Keep the paint outside children’s reach. Ventilate well during the appliance and drying process.

Packaging Available in 2,5L and 5L.

For further information you can visit the Pure & Original website. www.pure-original.com

Version 4

Profile for Pure & Original

Marrakech Walls technical information GB  

Technical information about Pure & Original Marrakech Walls

Marrakech Walls technical information GB  

Technical information about Pure & Original Marrakech Walls