__MAIN_TEXT__
feature-image

Page 1


2

eCORE is a simple, effective and considered modular signage system that provides virtually unlimited design options customisable to any interior or exterior environment. It can even be adapted to complement an existing system, while delivering significant cost savings over custom built solutions.

eCORE was developed by Programmed’s design and innovation team in conjunction with architects and signage experts. The goal was to develop a cost effective signage system with broad suitability to the corporate, education, health and government sectors.


3

The System

eCORE uses aluminium sign panels in 13 standard sizes to ease the specification process and allow sign panel replacement or change out. eCORE provides you with the base building blocks to design a signage system that suits your requirements.

When talking with designers, specifiers and property managers, we identified a need for a signage system that would deliver predesign benefits such as cost savings, wayfinding suitability and simplicity of specification, while ensuring an improvement in quality levels. Ron Gladman General Manager Programmed

Standard panels are orientated as required then combined into single or multi-足panel signs. This allows for the production of all sign types ranging from a small single sided room identity sign, right through to a large multi sided site entrance pylon or a fully bespoke sculptural installation. eCORE was designed with a simple aesthetic that lets the design elements of your project, environment or brand be the hero. This also allows eCORE to adapt and complement any existing signage.

160mm 321mm 160mm

321mm

643mm

965mm

643mm

965mm

1931mm


4

Signage Suite Example 1 – Internal Corporate It is simple to design, develop and specify internal signage for any environment using the eCORE signage system. The modular system allows for the design of single or multi-panel signs for wayfinding, directional or informative purposes.

Cost Savings The eCORE modular system not only saves you 25% on project costs due to computer controlled manufacturing, assembly and installation efficiencies, but also provides savings relating to initial design costs, future replacement and maintenance costs.

Signs can be suspended with cables, cantilevered off walls or formed around corners. eCORE is only limited by your imagination. Panel sizes are easily customisable while retaining system detail. Graphics

Conceptual

eCORE provides virtually endless combinations creating signs which have cut-through and impact. Face panels can be fixed to a variety of substrates, including wood and concrete to complement a project’s design element.

All sign elements can be powder coated or spray painted depending on your requirements. Graphics can be applied as either self adhesive vinyl or digital prints.

We can also encapsulate graphics under a hard wearing top coat to increase resistance to vandalism, while also increasing sign longevity. Graphic elements such as logos, symbols, numbers or directional arrows can also be: laser cut into panels, produced as cantilevered feature panels or 3D acrylic elements. You can also colour the eCORE Revealed Mounting Frame with a brand colour to link a project’s brand into the physical sign structure.

Panel sizes used in this suite:

Our team of designers worked for two years developing the eCORE signage system to ensure we ended up with a system that was simple, cost effective and environmentaly considered. Ben Robinson Design and Innovation Team Programmed

Aligned

Laser cut feature panels

Staggered

643mm x 965mm

2

321mm x 965mm

1

160mm x 965mm

6

643mm x 643mm

4

321mm x 643mm

2

321mm x 321mm

2

160mm x 321mm

2

160mm x 160mm

3


5


6

Signage Suite Example 2 – External Education The versatility of the eCORE signage system provides for the design of a variety of external signage options. From double sided monoliths to under awning and suspended sign applications.

Illumination Options

Modularity

Environmentally Considered

Panels or specific graphic components such as maps and schematics, may be further enhanced through the incorporation of C-lite™ LED lighting panels. This LED lighting will then provide stunning illumination to graphics or feature elements while retaining a slim sign profile.

A multitude of sign types can be designed by connecting different eCORE face panels. The use of separate panels means damaged panels or new copy requirements can be replaced easily. Computer controlled manufacturing guarantees new parts will integrate seamlessly.

eCORE is environmentally considered, utilising recyclable aluminium as its core material. Mild steel and stainless steel can also be specified to fit project specific environmental needs. Parts are standardised to maximise sheet yield and this reduces material waste.

Manufacturing is located in both Australia and New Zealand to minimise wasteful transportation costs. eCORE has also been designed for disassembly and recycling by reducing the use of secondary materials, particularly plastics found in signage ACM. This composite is particularly difficult to recycle.

Panel sizes used in this suite: 965mm x 1931mm

12

643mm x 965mm

6

643mm x 965mm

2

643mm x 643mm

2

321mm x 1931mm

2

321mm x 965mm

6

321mm x 643mm

8

321mm x 321mm

4

160mm x 965mm

12


7


8

Signage Suite Example 3 – Internal Health Industry

eCORE is an ideal signage solution for health, educational and corporate environments. Its flexibility and multipanel modular design has been purposely engineered as a stand alone system or to be incorporated into an existing signage system’s look and feel.

Programmed have successfully implemented over $250,000,000 worth of rebranding projects over the last 26 years. With 33 Australian and 15 New Zealand branches we are perfectly placed to help deliver your next signage project utilising the eCORE signage system. Nathan D’couto National Sales and Marketing Manager Programmed

Directories can be printed on single panels or multi-panel directories, which provide easy changeover. The precision of eCORE ’s manufacturing tolerances ensures that each panel is exactly the same size as the one it is replacing.

Panel sizes used in this suite: 965mm x 965mm

2

643mm x 965mm

3

160mm x 965mm

6

321mm x 965mm

1

160mm x 321mm

2

160mm x 160mm

2


9


10

Signage Suite Example 4 – Internal Conceptual

eCORE provides virtually endless combinations to create signs which have cut-through and impact. The face panels can be fixed to a variety of substrates such as wood or concrete to create or carry through a design element. eCORE is only limited by your imagination.

Easily specify and estimate project budgets with standard parts and part pricing. Cut your creative and production design costs with standard artwork templates. Be assured that every panel is precision made and interchangeable thanks to computer controlled manufacturing of a modular system focused on quality.

A high level of customisation is still avaliable: • Orientate and link panels in creative ways • Integration with other project specific materials such as wood and concrete • Customise panel sizes for specific requirements • Incorporate project detailing with laser cut or 3D fabricated elements • Illuminate with C-­lite™ slimline LED panels Integrated with wooden features Panel sizes used in this suite: 321mm x 1931mm

2

965mm x 965mm

1

643mm x 643mm

3

321mm x 643mm

1

321mm x 321mm

2

160mm x 965mm

3

160mm x 321mm

6

160mm x 160mm

12


11


12


13


14

Technical Information Panel Sizes The eCORE signage system is comprised of a standard grid and product family to ease the specification process. Panels can be orientated in landscape or portrait and combined into single or multi-panel signs ideal for both external and internal environments.

160mm 160mm

321mm

643mm

965mm

321mm

643mm

965mm

1931mm


Technical Information Panel Return Depths The eCORE signage system panels are available with 25mm and 40mm return depths. These can be specified as top and bottom or side returns. Combining a 25mm panel with a 40mm panel creates either a relief or recessed 15mm design feature. This feature can be further accentuated with different coloured panels.

15


16

Construction Details Single Panel Single panel displays can be created and installed to walls with Revealed Mounting Frames or used as sign elements designed into other structures. Revealed Mounting Frames are used to cap and mount single panels. Revealed Mounting Frames have been designed not only to be integral to the sign structure, but also remain revealed as a functional design element you can apply a brand or building colour to.

Components: Face Panels FAP160r25.160 1 Revealed Mounting Frames RMF160r25 2 Fixings as required

Components: Face Panels FAP321.643r40 1 Revealed Mounting Frames RMF321r40 2 Fixings as required

Components: Face Panels FAP321.r40.643 1 Revealed Mounting Frames RMF643r40 2 Fixings as required


17

Construction Details Multi Panel Double-sided signs can be constructed with the mounting frame revealed. This provides an enhanced design aesthetic by highlighting the frame in a brand colour or environment colour. Other display formats can be shaped by your imagination using panel configurations to form cantilevered or suspended signs, or used as sign elements mounted onto other architectural materials or structures.

Components: Face Panels FAP160.643r25 2 Revealed Mounting Frames RMF160r25 4 Fixings as required

Components: Face Panels FAP160r25.160 2 Revealed Mounting Frames RMF160r25 2 Multi Panel Joiners MPJr25 2 Feature Panels 1 Fixings as required


18

Construction Details Wall Mounted Multi-panel wall signs are easily developed by combining two Revealed Mounting Frames with two Multi Panel Joiners to create a frame. The frame is fixed to the wall and the panels are fixed to the frame.

2mm negative detail

Multi Panel Joiners are available in different lengths to accommodate a variety of sign heights.

Components: Face Panels FAP160r40.965 4 Revealed Mounting Frames RMF965r40 2 Multi Panel Joiners MPJr40 2 Fixings as required


19

Construction Details Free Standing Single or multiple panels can be combined to easily create double sided free standing signs.

Typical construction detail

eCORE sign panels can be used in conjunction with purpose built structures to form free standing signs in various configurations. Signs can also be customised by adding blades to available fixing points allowing for individual creativity. Design features such as laser cut panels are easily incorporated into the system.

Components: Face Panels FAP643r40.965 6 Revealed Mounting Frames RMF965r40 2 Feature Panel 1 Fixings as required

Components: Face Panels FAP965r40.965 6 Revealed Mounting Frames RMF965r40 2 Fixings as required


20

Specification Charts Face Panels (FAP) FACE PANELS (FAP) Height Length Code



25mm Returns

40mm Returns

Returns on Short Side

Returns on Long Side

  





1 FAP160r25.160 160 160 yes - yes yes

 





eCORE



Number of parts

FACE PANELS

           



      

1 FAP321r25.321 321 321 yes - yes yes 2 FAP321r25.643 321 643 yes - yes 3 FAP321.643r25 321 643 yes - - yes 4 FAP321r25.965 321 965 yes - yes -

FAP 321

5 FAP321.965r25 321 965 yes - - yes 6 FAP321r40.965 321 965 - yes yes 7 FAP321.965r40 321 965 - yes - yes

        

       



9 FAP160.965r40 160 965 - yes - yes









8 FAP160r40.965 160 965 - yes yes -

 



7 FAP160.965r25 160 965 yes - - yes

    

FACE PANEL PRINTING

9 FAP321.1931r25 321 1931 yes - - yes

40mm 321mm

FAP 643 FAP 965

2 FAP965r40.1931 965 1931 - yes yes -

40mm

5 FAP643r40.1931 643 1931 - yes yes -

1 FAP965r40.965 965 965 - yes yes yes



 





NAVISION NO. CIM NO. LAST REVISION AUTHOR FILE LOCATION

: : : : :

N/A N/A 28/08/2012 JK NATIONAL/

K NOT TO SCALE

Gate 5

FOLD LINE

25mm bleed

3 FAP965.1931r40 965 1931 - yes - yes Code = Face Panel height x length with the 25mm or 40mm return placed next to the width or height it is folded off.



         

St. Stephen’s Grammar

2 FAP643r40.643 643 643 - yes yes yes

6 FAP643.1931r40 643 1931 - yes - yes





FOLD LINE

1 FAP643r25.643 643 643 yes - yes yes

4 FAP643.965r40 643 965 - yes - yes



643mm

10 FAP321r40.1931 321 1931 - yes yes -

3 FAP643r40.965 643 965 - yes yes -

  

8 FAP321r25.1931 321 1931 yes - yes -

11 FAP321.1921r40 321 1931 - yes - yes



Standard A1 artwork

6 FAP160r25.965 160 965 yes - yes -





5 FAP160.643r25 160 643 yes - - yes





FAP 160

4 FAP160r25.643 160 643 yes - yes -



3 FAP160.321r25 160 321 yes - - yes

Example part drawing

2 FAP160r25.321 160 321 yes - yes -

A DETAILED CHECK MEASURE MAY BE REQUIRED TO CONFIRM MEASUREMENTS & FIT PRIOR TO MANUFACTURE. SIGNATURE

DATE

APPROVED AS IS

REVISION REQ’D

This design remains the property of Programmed who retain all rights of reproduction. Programmed is the owner or licensee of all literary and artistic works, including text, photographs, artwork and compilations of data contained in this document. Any unauthorised use, dissemation or reproduction of this document, or any part of this document, is prohibited. ALL RIGHTS RESERVED. The colours on this drawing are an indication only. Use corporate colour specifications for manufacture. This size of signage indicated in this presentation is nominal.


21

Specification Charts Mounting & Joining 

643

yes

-

use single RMF use two RMFs

4

RMF965r25

965

yes

-

use single RMF use two RMFs

5

RMF1931r25

1931

yes

-

use single RMF use two RMFs

6

RMF160r40

160

-

yes

use single RMF use two RMFs

7

RMF321r40

321

-

yes

use single RMF use two RMFs

8

RMF643r40

643

-

yes

use single RMF use two RMFs

9

RMF965r40

965

-

yes

use single RMF use two RMFs

10

RMF1931r40

1931

-

yes

use single RMF use two RMFs

           

    

yes

-

use single MPJ use two MPJs

custom

-

yes

use single MPJ use two MPJs

Code = Multi Panel Joiner to match 25mm or 40mm – custom sized to match panel sizes and number of panels.

   







 





         

     





 



       









41 Parts make up eCORE’s standard parts system. This excludes Multi Panel Joiner size permutations which are custom sized to cater for the specified panel sizes and panel numbers. Support frames for freestanding signs. Feature Panels cantilevered off eCORE signs.



custom

MPJr40



MPJr25

2





1

 

25mm 40mm Single Double Size Code Returns Returns Sided Sign Sided Sign



 



  

       

eCORE

 



      

        



MULTI PANEL JOINERS

Number of parts



MPJ



 

Code = Face Panel height or width that this Revealed Mounting Frame matches, plus depth match to either a 25mm or 40mm return.

MULTI PANEL JOINERS (MPJ)





Full-scale drawings are available on request from Programmed.





All drawings and charts are copyright of Programmed. 





  

Example part drawing

RMF643r25







 





     





Example part drawing

3



use single RMF use two RMFs



use single RMF use two RMFs

-



-

yes

 



yes

321



160

RMF321r25

RMF

RMF160r25

2

 





25mm 40mm Single Double FAP Match Code Returns Returns Sided Sign Sided Sign

1

 



eCORE







Number of parts

REVEALED MOUNTING FRAMES



REVEALED MOUNTING FRAMES (RMF)


22

About Programmed Innovation that directs Programmed provides intelligent solutions to help businesses grow. We have built our reputation as one of Australasia’s most respected organisations providing quality service, professional expertise and innovative business solutions for workplaces across all industry sectors in Australia and New Zealand.

Programmed employs over 2,500 tradespeople and professional staff and maintains over 60,000 buildings and structures for more than 5,500 customers across a network of over 50 branches.

At Programmed we pride ourselves on our service delivery and achieving the best possible quality and value. Our goal is to minimise risk and ensure that every action we take will not compromise the safety or environmental well-being of our customers, the public and ourselves.

DARWIN

Cairns

Through our experience, we can assure you of a quality outcome by producing signage that reflects the best possible finish in translating the intended graphic design to the built environment. Programmed undertakes all forms of signage projects in the fields of government, retail, commercial, health and education. These projects include wayfinding systems, national multi-site reimaging projects as well as oneoff sign projects.

Townsville Mackay Rockhampton Sunshine Coast Toowoomba

BRISBANE

Gold Coast Lismore Tamworth

PERTH Bunbury

Barossa Valley

ADELAIDE

Mildura

Shepparton Bendigo Ballarat Geelong Devonport

Orange

Port Macquarie Newcastle Wyoming

SYDNEY

Wollongong Canberra Albury Wodonga

Whangarei North Shore

AUCKLAND

Hamilton

New Plymouth

MELBOURNE

Palmerston North

Morwell

Nelson Blenheim

Launceston

HOBART

Mt Maunganui Rotorua Gisborne Napier Wellington

Christchurch

Invercargill

Dunedin

Programmed’s services are delivered with a consultative approach and one-point of contact assigned to a project. This provides the personal service and expertise to take the complexity out of running a project and reduces the risk to our clients. We manage the design, manufacture, supply and installation of signage, and specialise in multi-site reimaging projects.


23

Our project services include:

Our Value Chain

Consultation

Design

Construction

Delivery & Installation

Information Management

They are underpinned by our commitment to:

Strong Project & Client Relationship Management

Programmed Maintenance

> Site assessments and audits > Sign strategies > Concept development > Design and specification > Artwork & documentation > Style guides > Engineering certification > Permits > Locally based supply > On site supervision > Manufacture and installation > Wayfinding and directory signage > Permit applications > Traffic management > On-going servicing, maintenance and repairs

After 60 years of taking care of property, we will be there in the future to assist with on-going servicing and maintenance, protecting the integrity of the signage assets and standing by our product. With a commitment to equal opportunity, compliance to the National Code of Practice for the Construction Industry and quality and safety through our integrated management system, Programmed will ensure an end result to the highest standard and that all projects will be undertaken with a focus on the safety of all personnel and the public.


The eCORE signage system. eCORE is a simple, effective and considered modular

ecoresignagesystem.com.au programmed.com.au

ecoresignagesystem.co.nz programmed.co.nz

Telephone: 1800 620 911 marketing@programmed.com.au

Telephone: 0800 620 911 marketing@programmed.co.nz

Design by theSHAPEgroup

signage system that provides virtually unlimited design options customisable to any interior or exterior environment. It can even be adapted to complement an existing system, while delivering significant cost savings over custom built solutions.

Profile for Programmed

ECORE Signage Systems  

ECORE Signage Systems

ECORE Signage Systems  

ECORE Signage Systems

Advertisement