Page 1

Variable Catalog 09V


WARRANTY Bergen-Power Pipe Supports, Inc. (“Bergen-Power”) warrants to the original buyer (the “Buyer”) of products manufactured by it that all such products will be free from defects in material and workmanship for a period of one (1) year after the date of shipment when used in the manner and for the purpose recommended by Bergen-Power. Bergen-Power does not warrant goods manufactured by other parties, except to the extent that such goods are covered by a warranty to Bergen-Power. Notice of a claim for a breach of a warranty must be given to Bergen-Power within thirty (30) days after the date that the Buyer first has knowledge of an alleged breach of warranty, but in no event later than one (1) year after the date of shipment. Bergen-Power’s obligations under this Warranty are limited to its repair or replacement of those products that it determines, to its satisfaction, are defective, and it shall not be liable for any charge or expense incurred by the Buyer in repairing or replacing said products. Notwithstanding anything else contained herein to the contrary, Bergen-Power’s liability under this Warranty for defective products is limited to the net sales price of such products. The foregoing constitutes the Buyer’s sole and exclusive remedy for defective products. In the event that Bergen-Power provides engineering design or fabrication services, the Buyer’s acceptance of Bergen-Power’s design or delivery of the products shall relieve Bergen-Power of all further obligations with respect to such design and fabrication, except to the extent that Bergen-Power may otherwise expressly provide in a product warranty. In no event, shall Bergen-Power be responsible for design errors due to inaccurate or incomplete information provided by the Buyer or its representatives. Bergen-Power reserves the right to revise product design without notification. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER. IN NO EVENT AND UNDER NO CIRCUMSTANCE SHALL BERGEN-POWER BE LIABLE FOR (A) PERSONAL INJURY OR PROPERTY DAMAGES OR (B) CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES, WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE OR ANY OTHER TORTIOUS ACT OR OMISSION. THIS WARRANTY SHALL NOT APPLY TO PRODUCTS THAT HAVE BEEN SUBJECT TO ALTERATION OR REPAIR MADE BY A PARTY OTHER THAN BERGEN-POWER, ACCIDENT, ABUSE, OR MISUSE. THIS WARRANTY SUPERCEDES ALL CONTRARY OBLIGATIONS IMPOSED ON BERGEN-POWER BY ANY PURCHASE ORDER. The terms of this Warranty may not be modified or changed except by a writing signed by an authorized officer of Bergen-Power.


VARIABLE SPRING SUPPORTS

W

e take pleasure in presenting to the piping industry the most versatile line of engineered hangers and supports. We enjoy a position of leadership based upon years of experience in designing and manufacturing quality pipe support devices. Our supports have been employed with outstanding success in the chemical, processing and electric power industries. Our personnel are committed to respond quickly to customer requirements and service needs on both standard items and specialized applications. We are totally a service oriented company. We are staffed with engineers knowledgeable in every phase of pipe support design and application. We are equipped to evaluate support design on the basis of function, reliability and manufacturing economy, and to suggest improved designs using either standard or custom items for special requirements. All products are manufactured under a scientific, statistical quality control system which assures that the finished product will conform to pre-determined standards highest in the industry. It is your guarantee of consistent, uniform quality at all times.

INDEX

PAGE

Service and Specifications .......................2 Design Features ........................................2 Travel Series, Size and Type Selection.......................................2-3 Presets and Travel Stops ..........................3 Installation and Adjustment .....................3 Size and Series Selection Procedure..................................................4 Size and Series Selection Chart (Imperial - IPS) ........................................5 Size and Series Selection Chart (Metric - MKS) .....................................6-7 Nameplate and Cutaway Detail................8 Figure 291 ................................................8 Manufacturers Conversion Table .............9 Series 910 Dimensions .....................10-16 Series 920 Dimensions .....................17-23 Series 940 Dimensions .....................24-30 Series 960 Dimensions .....................31-37 Series 980 Dimensions .....................38-44 Technical Information.......................46-49

1


VARIABLE SPRING SUPPORTS INTRODUCTION The Variable Support is a spring loaded device used for the support of piping and equipment where normal vertical movement is anticipated. Variable Supports are manufactured in five different Travel Series which allow up to ten inches of movement and twenty-five different sizes allowing up to 50,000 pounds of load. Seven different mounting Types allow the user the widest selection of configurations to accommodate practically every hanger design.

RECOMMENDED SERVICE Normally for support of piping systems where thermal changes cause the system dimensions and position to change, and where load transfer to equipment is not a problem. Maximum recommended variation from the operating load is 25%. A constant support should be used when Variability exceeds 25%. Also used for support of equipment and ductwork to customer specifications.

• • • • • •

SPECIFICATIONS All spring units are designed to meet the requirements of: • ASME Code for Pressure Piping, ASME B31.1, B31.3 • Manufacturers Standardization Society (MSS), SP-58, and SP-69 • Federal Specification A-A-1192-A • British Standard BS3974

STANDARD DESIGN FEATURES • Precompression - precompressing the spring coil into the hanger casing saves headroom by reducing the size of the casing, reduces the installed envelope size and also weight and erection time. • Spring casing protects the coil from damage and weather. • Steel Construction – spring, casing, and internal parts are fabricated of steel making them rugged and compact. All welding is done to the strict requirements of ASME Section IX. • The Piston Plate serves as a centering device and guide maintaining coil concentricity under normal operating conditions. • Load Indicators are visible in the slots and are clearly readable. • Stainless steel nameplate and travel scale are corrosion resistant. • All spring hangers are calibrated for accurate loading conditions. • The unit is preset at the factory to the Cold Load upon request. • For each series there is a reserve travel at the upper and lower limits of the working range of the spring. • Allowable spring coil stresses conform to MSS-SP-58. • Standard finish is a quality rust resisting primer paint. • A turnbuckle or other suitable coupling is utilized for adjustment of rod type spring units. F type springs utilize an adjustable load column. • All F type units are supplied with a load flange.

OPTIONAL DESIGN FEATURES • Travel Stop – set at the Cold load position changes the spring into a rigid support for hydrostatic testing or other

2

purposes. The strength of the Travel Stop is designed so that it can withstand (up to) 2 times the normal load. Adjustable Travel Stop – allows the resetting of Preset/Travel Stop at any location within the normal operating range of the travel. Limit Stops – permanently installed to prevent the movement of the pipe beyond a predetermined distance or load within the travel range of the spring. Load Column Guide – for Type F units only, to prevent tipping of the Load Flange due to anticipated eccentric loading. Extended Load Column – for Type F units only, the length of the load column is furnished longer than normal per customer request. Lifting Lugs – are available on larger sizes to facilitate erection and installation. Hot-dip Galvanized Finish – available for protection against weather and corrosive conditions. The unit is galvanized to ASTM A-153 except the spring coil which is epoxy powder coated to assure protection to the coil as it flexes. The load column of the F Type spring is electrogalvanized. Maximum ambient temperature for the epoxy powdered coating is 350° F (177° C). Epoxy Paint Finish – available for protection against weather and corrosive conditions. The unit is painted with a two-part zinc rich epoxy paint except the spring coil which is epoxy powder coated. Stainless Steel Construction – allows the greatest degree of corrosion protection. Constructed completely of stainless steel except the spring coil which can be epoxy powder coated for economy.

DETERMINING THE TRAVEL SERIES In choosing the proper Variable Spring Travel Series it must first be determined that the calculated movement will fall within the working range of the support and that the variability of the unit does not induce unacceptable loads on the other supports or connections. Five (5) standard Travel Series are available ranging from 11⁄4" through 10".

SIZE AND SERIES SELECTION PROCEDURE The size of the Variable Spring support selected depends upon the total piping load to be supported. Complete sizing information is given on the SIZE and SERIES SELECTION PROCEDURE shown in this catalog.

DETERMINING THE TYPE The type of Variable Spring support to be selected depends upon the physical characteristics of the structure to which the hanger assembly will be attached. Consideration must be given to available headroom, whether the piping will be supported from above or below the hanger, interferences, etc. There are seven (7) standard types available for each Travel Series; they are: • Type A – Is attached to the supporting member by a vertical rod threaded into the top of the case. • Type B – For use where headroom is limited. The unit has a single lug for attachment to the structure to permit connecting with a bolt or pin to a clevis or welded beam attachment.


VARIABLE SPRING SUPPORTS • Type C – Also designed for limited headroom applications. The unit has two lugs welded to the top of the casing to permit connecting with a bolt or pin through a single lug attachment to the structure. • Type D – Designed for use where the variable spring is positioned above the supporting structure and spring adjustment is made from the top. • Type E – Also designed for use where the variable spring is positioned above the supporting structure, but where the spring adjustment must be below the structure on which the case is supported. • Type F – Designed to support piping from below. Used to support pipe from the floor or where support from overhead is not practical. • Type G – For use where headroom is limited or an obstruction prohibits the use of a single rod type Variable Spring.

LOAD PRESET BAR AND TRAVEL STOP The Load Preset Bars are installed at the factory at the Cold Load setting of the unit. The Travel Stops, which are optional and will be provided only if ordered, include both the Load Preset Bars to preset the unit at the Cold Load setting and more importantly a down limit stop which locks the unit at that position. This locking effect results in the unit functioning as a rigid hanger during erection, hydrostatic testing, chemical cleaning or other condition which may cause the unit to exceed its load rating. The Travel Stops are designed for twice the maximum working load of the unit and are installed at the factory with a “Caution” tag which calls attention to the fact that they must be removed before system startup.

INSTALLATION AND ADJUSTMENT In following these installation instructions note that the adjustment is accomplished by rotating the turnbuckle, rod coupling or load column provided with the spring unit. Firmly secure the spring unit to the structure. Attach the appropriate rod and/or pipe attachment. Cut the banding holding the Load Presets or Travel Stops. Remove the

down limit stops, if applicable. To remove the Load Presets, the spring load must be increased slightly by use of the adjustment means provided. After the Load Presets or Travel Stops have been removed, readjust the spring unit back to the exact Cold Load setting. Prior to startup, be sure all of the spring units have had their Load Presets or Travel Stops removed, and have been adjusted to their Cold Load setting. After startup and when the piping system has stabilized thermally, the Load Indicator on the unit should be at the Hot Load (Operating) setting. If it is not, the spring should be adjusted to the Hot Load setting. No further adjustment should be needed.

ORDERING INSTRUCTIONS: When ordering a Variable Spring Support please specify for each unit: 1. Travel Series: 910, 920, 940, 960, or 980 2. Spring Type: A, B, C, D, E, F or G 3. Spring Size: 0 through 22 for all Travel Series; 000 and 00 available for Travel Series 920 only 4. Movement and Direction of movement from the Cold (Installed) position to the Hot (Operating) position. 5. Hot Load (Operating position). 6. Cold Load (Installed position). 7. Rod Spacing: For Type G only, specify center to center rod dimension 8. Customer hanger identification or Mark Number (if any). 9. Finish: Primer Painted, Galvanized, Epoxy Painted, Stainless Steel, or Special Customer Requirements. 10. Type B and C units do not come with connection pins to the structure. If required, please order as a Figure 291 and specify pin size and finish. 11. Specify if unit requires Travel Stops, Lifting Lugs, Limit Stop Load Column Guide, Adjustable Travel Stops or any other special feature desired.

TYPICAL APPLICATIONS OF VARIABLE SPRING SUPPORTS

EXISTING STEEL

TYPE A

TYPE B

TYPE C

TYPE D

TYPE E

TYPE F

TYPE G

3


VARIABLE SPRING SUPPORTS SIZE AND SERIES SELECTION PROCEDURE The key criteria in selecting the size and series of a Variable Spring support is a factor known as Variability. This is a calculation of the percentage change in the supporting force of a variable spring between the Hot (Operating Condition) and the Cold (Installed Condition). The formula is shown below. For practical purposes this percentage relates to the amount of load the spring transfers back into the piping system prior to operation. The lower the Variability the lower the effect on the system while in the Cold position. Since the Hot Load is the actual Operating Load of the piping, loading due to Variability is not a factor. The Spring Rate is the amount of load required to deflect a spring coil over a given distance and is expressed in pounds per inch (Newtons per millimeter). The Movement is the amount the piping system changes due to thermal growth when moving from the Cold to Hot position. Variability = Movement x Spring Rate Hot Load % Variability = Variability x 100 The Cold Load is calculated by adding (for UP movement) or subtracting (for DOWN movement) the product of Spring Rate times the Movement to or from the Hot Load. If an allowable Variability is not specified, good practice would be to use 25% as specified by MSS-SP-58. TO SELECT THE PROPER SIZE AND SERIES 1. Find the Hot Load in one of Spring Size columns on the appropriate SIZE AND SERIES SELECTION CHART found on page 5, 6, or 7. 2. Calculate the maximum allowable Spring Rate from the formula: Spring Rate = Variability x Hot Load Movement 3. Stay in the column and choose the Travel Series with a Spring Rate equal to or less than the value calculated. 4. Calculate the Cold Load and check that both the Hot Load and Cold Load fall within the Working Range of the Travel Series selected. 5. If your requirements are not met, move to an adjacent Spring Size column and recalculate again using the above procedure. If the Movement or loading requirements cannot be satisfied, select a Travel Series with a greater Working Range and recalculate. If any combination of Load, Movement and/or Variability cannot achieve the desired results the use of a Constant Support should be considered.

4

EXAMPLE: Select a Variable Spring for the following conditions: Hot Load = 307 lbs. or 1366 N or 139 Kg Movement = 1â „2" up or 13 mm or 13 mm Variability = 20% Maximum 20% max. 20% max. SOLUTION: 1. Calculate Spring Rate. 0.20 x 307 lbs. = 122.8 lbs. per inch, or 0.50 inches 0.20 x 1366 N = 21 N/mm, or 13mm 0.20 x 139 Kg = 2.14 Kg/mm 13mm 2. Find the Spring Size column on the SIZE AND SERIES SELECTION CHART where the Hot Load is 307 lbs., or 1366 N or 139 Kg. (A Size 5, Series 920 fits the criteria). 3. Calculate the Cold Load. 63 lbs. per inch x 0.50 inches

= 32 lbs., or

11 N per mm x 13 mm

= 143 N, or

1.12 Kg per mm x 13 mm

= 15 Kg

Since the Movement is UP, add the above load change to the Hot Load. 307 lbs. + 32 lbs. = 339 lbs. Cold Load, or 1366 N + 143 N

= 1509 N Cold Load, or

139 Kg + 15 Kg

= 154 Kg Cold Load

4. Now check to see if the Hot Load and Cold Load fit in the Working Range of a Size 5 Series 920. If so, you have selected the proper unit. If you are unable to find the proper size and series of your application, please call us.


6

71⁄2

8

10

980

41⁄2

6

960

3

4

940

5

4

3

2

1

11⁄2

2

920

21⁄2

2

11⁄2

1

1⁄ 2

910

11⁄4

1

3⁄ 4

1⁄ 2

1⁄ 4

0

0

0

0

0

940 920 910

980 960

Working Range Inches

22

24

26

28

30

31

34

35

38

40

41

43

45

47

49

50

53

55

56

58

60

62

64

66

68

70

72

00

8

9

10

11

12

12

14

14

15

16

17

18

19

20

21

21

22

23

24

25

26

27

28

28

29

30

31

000

15

20

7

7

19

7

000* 00*

0

1

21 10 7 5

7

5

4

42

30

15

1

137

134

131

129

126

123

121

118

116

113

110

108

105

102

100

97

95

92

89

87

84

81

79

76

74

71

68

66

63

0

98

96

94

92

90

88

86

84

83

81

79

77

75

73

71

69

68

66

64

62

60

58

56

54

53

51

49

47

45

2

7

9

13

27

54

2

176

172

169

165

162

159

155

152

149

145

142

138

135

132

128

125

122

118

115

111

108

105

101

98

95

91

88

84

81

3

9

12

17

35

70

3

228

223

219

214

210

206

201

197

193

188

184

179

175

171

166

162

158

153

149

144

140

136

131

127

123

118

114

109

105

4

12

16

23

47

94

4

306

300

294

288

282

276

270

264

259

253

247

241

235

229

233

217

212

206

200

194

188

182

176

170

165

159

153

147

141

5

16

21

31

63

126

5

410

402

394

386

378

370

362

354

347

339

331

323

315

307

299

291

284

276

268

260

252

244

236

228

221

213

205

197

189

6

21

28

42

84

168

6

546

536

525

515

504

494

483

473

462

452

441

431

420

410

399

389

378

368

357

347

336

326

315

305

294

284

273

263

252

7

28

37

56

112

224

7

728

714

700

686

672

658

644

630

616

602

588

574

560

546

532

518

504

490

476

462

448

434

420

406

392

378

364

350

336

8

38

50

75

150

300

8

975

956

938

919

900

881

863

844

825

806

788

769

750

731

713

694

675

656

638

619

600

581

563

544

525

506

488

469

450

9

50

67

100

200

400

9

1300

1275

1250

1225

1200

1175

1150

1125

1100

1075

1050

1025

1000

975

950

925

900

875

850

825

800

775

750

725

700

675

650

625

600

10

11

12

12

2925

2869

2813

2756

2700

2644

2588

2531

2475

2419

2363

2306

2250

2194

2138

2081

2025

1969

1913

1856

1800

1744

1688

1631

1575

1519

1463

1406

1350

SPRING SIZE

11

2210

2168

2125

2083

2040

1998

1955

1913

1870

1828

1785

1743

1700

1658

1615

1573

1530

1488

1445

1403

1360

1318

1275

1223

1190

1148

1105

1063

1020

13

13

3900

3825

3750

3675

3600

3525

3450

3375

3300

3225

3150

3075

3000

2925

2850

2775

2700

2625

2550

2475

2400

2325

2250

2175

2100

2025

1950

1875

1800

65

87

130

260

520

85

113

170

340

680

113

150

225

450

900

150

200

300

600

1200

SPRING RATE - Pounds/Inch

10

1690

1658

1625

1593

1560

1528

1496

1463

1430

1398

1365

1333

1300

1268

1235

1203

1170

1138

1105

1073

1040

1008

975

943

910

878

845

813

780

SPRING SIZE

200

267

400

800

1600

14

5200

5100

5000

4900

4800

4700

4600

4500

4400

4300

4200

4100

4000

3900

3800

3700

3600

3500

3400

3300

3200

3100

3000

2900

2800

2700

2600

2500

2400

14

LOAD TABLE IN POUNDS

270

360

540

1080

2160

15

7020

6885

6750

6615

6480

6345

6210

6075

5940

5805

5670

5335

5400

5265

5130

4995

4860

4725

4590

4455

4320

4185

4050

3915

3780

3645

3510

3375

3240

15

SIZE AND SELECTION CHART

16

375

500

750

1500

3000

16

9750

9563

9375

9188

9000

8813

8625

8438

8250

8063

7875

7688

7500

7313

7125

6938

6750

6563

6375

6188

6000

5813

5625

5438

5250

5063

4875

4688

4500

17

500

667

1000

2000

4000

17

13000

12750

12500

12250

12000

11750

11500

11250

11000

10750

10500

10250

10000

9750

9500

9250

9000

8750

8500

8250

8000

7750

7500

7250

7000

6750

6500

6250

6000

18

665

887

1330

2660

5320

18

17290

16958

16625

16293

15960

15628

15295

14963

14630

14298

13965

13633

13300

12968

12635

12303

11970

11638

11305

10973

10640

10308

9975

9643

9310

8978

8645

8313

7980

19

885

1180

1770

3540

7080

19

23010

22568

22125

21863

21240

20798

20355

19913

19470

19028

18585

18143

17700

17258

16815

16373

15930

15488

15045

14603

14160

13718

13275

12833

12390

11948

11506

11063

10620

20

1175

1567

2350

4700

9400

20

30550

29963

29375

28788

28200

27613

27025

26438

25850

25263

24675

24088

23500

22913

22325

21738

21150

20563

19975

19388

18800

18213

17625

17038

16450

15863

15275

14688

14100

21

1563

2083

3125

6250

12500

21

40625

39844

39063

38281

37500

36719

35938

35156

34375

33594

32813

32031

31250

30469

29688

28906

28125

27344

26563

25781

25000

24219

23438

22656

21875

21094

20313

19531

18750

22

2084

2778

4168

8335

16670

22

54178

53136

52094

51052

50010

48968

47926

46884

45843

44801

43759

42717

41675

40633

39591

38549

37508

36466

35424

34382

33340

32298

31256

30214

29173

28131

27089

26047

25005

910

13⁄4

11⁄2

11⁄4

1

3⁄ 4

1⁄ 2

1⁄ 4

920

31⁄2

3

21⁄2

2

11⁄2

1

1⁄ 2

940

7

6

5

4

3

2

1

960

101⁄2

9

71⁄2

6

41⁄2

3

11⁄2

0

980

14

12

10

8

6

4

2

0

960 980 0

0

0

910 920 940

Spring Deflection Inches

VARIABLE SPRING SUPPORTS

5


6

102

127

203 152

254 191

980

76

152 114

960

51

76

102

940

25

38

50

920

64

51

38

25

13

910

32

25

19

13

6

0

0

0

0

0

940 920 910

980 960

Working Range Millimeters

85

89

31

31

374

383

133

138

151

156

169

178

182

191

200

209

218

222

236

245

249

258

267

276

285

294

302

311

320

00

53

53

62

62

67

71

76

80

85

89

93

93

98

102

107

111

116

120

125

125

129

133

138

000

2.6

351

125

49

1.2

342

116

44

1

3.7 1.8 1.2 0.9

1.3

0.9

0.7

7.4

5.3

2.6

1

609

596

583

574

560

547

538

525

516

503

489

480

467

454

445

431

423

409

396

387

374

360

351

338

329

316

302

294

280

0

436

427

418

409

400

391

369

360

334

325

316

307

302

294

285

276

267

258

249

240

236

227

40

218

98

107

36

209

0

200

000* 00*

2

1.2

1.6

2.4

4.7

9.5

2

783

765

752

734

721

707

689

676

663

645

632

614

600

587

569

556

543

525

512

494

480

467

449

436

423

405

391

374

360

3

1.6

2.0

3.1

6.1

12.3

3

1014

992

974

952

934

916

894

876

858

836

818

796

778

761

738

721

703

681

663

641

623

605

583

565

547

525

507

485

467

4

5

1294

1263

1228

1192

1156

1121

1085

1050

1014

983

947

912

876

841

1575

1543

1508

2.1

2.8

4.1

8.2

16.5

4

2.8

3.7

5.5

11.0

22.1

5

1361 1824

1334 1788

1308 1753

1281 1717

1254 1681

1228 1646

1201 1610

1174

1152

1125

1099 1472

1072 1437

1045 1401

1019 1366

1036 1330

965

943

916

890

863

836

810

783

756

734

707

681

654

627

6

3.7

4.9

7.4

14.7

29.4

6

2429

2384

2335

2291

2242

2197

2148

2104

2055

2010

1962

1917

1868

1824

1775

1730

1681

1637

1588

1543

1495

1450

1401

1357

1308

1263

1214

1170

1121

7

4.9

6.5

9.8

19.6

39.2

7

3238

3176

3114

3051

2989

2927

2865

2802

2740

2678

2615

2553

2491

2429

2366

2304

2242

2180

2117

2055

1993

1930

1868

1806

1744

1681

1619

1557

1495

8

6.7

8.8

13.1

26.3

52.5

8

4337

4252

4172

4088

4003

3919

3839

3754

3670

3585

3505

3421

3336

3251

3171

3087

3002

2918

2838

2753

2669

2584

2504

2420

2335

2251

2171

2086

2002

9

8.8

11.7

17.5

35.0

70.0

9

5782

5671

5560

5449

5338

5226

5115

5004

4893

4782

4670

4559

4448

4337

4226

4114

4003

3892

3781

3670

3558

3447

3336

3225

3114

3002

2891

2780

2669

10

11

12

12

13010

12761

12512

12259

12010

11761

11511

11258

11009

10760

10511

10257

10008

9759

9510

9256

9007

8758

8509

8255

8006

7757

7508

7255

7006

6757

6507

6254

6005

SPRING SIZE

11

9830

9643

9452

9265

9074

8887

8696

8509

8318

8131

7940

7753

7562

7375

7184

6997

6805

6619

6427

6241

6049

5862

5671

5440

5293

5106

4915

4728

4537

11.4

15.2

22.8

45.5

91.1

14.9

19.8

29.8

59.5

119

19.8

26.3

39.4

78.8

158

SPRING RATE - N/mm

10

7517

7375

7228

7086

6939

6797

6654

6507

6361

6218

6072

5929

5782

5640

5493

5351

5204

5062

4915

4773

4626

4484

4337

4194

4048

3905

3759

3616

3469

SPRING SIZE

26.3

35.0

52.5

105

210

13

17347

17014

16680

16346

16013

15679

15346

15012

14678

14345

14011

13678

13344

13010

12677

12343

12010

11676

11342

11009

10675

10342

10008

9674

9341

9007

8674

8340

8006

13

35.0

46.8

70.0

140

280

14

23130

22685

22240

21795

21350

20906

20461

20016

19571

19126

18682

18237

17792

17347

16902

16458

16013

15568

15123

14678

14234

13789

13344

12899

12454

12010

11565

11120

10675

14

LOAD TABLE IN NEWTONS

47.3

63.0

94.6

189

378

15

31225

30624

30024

29424

28823

28223

27622

27022

26421

25821

25220

23730

24019

23419

22818

22218

21617

21017

20416

19816

19215

18615

18014

17414

16813

16213

15612

15012

14412

15

SIZE AND SELECTION CHART

16

65.7

87.6

131

263

525

16

43368

42536

41700

40868

40032

39200

38364

37532

36696

35864

35028

34196

33360

32528

31692

30860

30024

29192

28356

27524

26688

25856

25020

24188

23352

22520

21684

20852

20016

17

87.6

117

175

350

700

17

57824

56712

55600

54488

53376

52264

51152

50040

48928

47816

46704

45592

44480

43368

42256

41144

40032

38920

37808

36696

35584

34472

33360

32248

31136

30024

28912

27800

26688

18

116

155

233

466

932

18

76906

75429

73948

72471

70990

69513

68032

66555

65074

63598

62116

60640

59158

57682

56200

54724

53243

51766

50285

48808

47327

45850

44369

42892

41411

39934

38453

36976

35495

19

20

21

22

115857

111222

97300 129762

93826 125127

90352 120492

86874

83400

99302 132052 176101

96691 128574 171466

94075 125100 166836

91464 121626 162201

88849 118152 157566

86238 114674 152931

83622 111200 148296

81011 107726 143662

78396 104252 139027

75785 100774 134392

73170

70559

67943

65332

62717

117596 156374 208540

114981 152900 203910

112370 149426 199275

155

207

310

620

1240

19

206

274

411

823

1646

20

274

365

547

1094

2189

21

365

486

730

1459

2919

22

102348 135886 180700 240984

100382 133275 177226 236349

98412 130660 173752 231714

97247 128049 170274 227079

94476 125434 166800 222444

92510 122823 163326 217810

90539 120207 159852 213175

88573

86603

84637

82666 109754 145952 194640

80700 107143 142474 190005

78730 104528 139000 185370

76764 101917 135526 180736

74793

72827

70857

68891

66920

64954

62984

61018

59047

57081

55111

53145

51179

49208

47238

910

44

38

32

25

19

13

6

920

89

76

64

51

38

25

13

940

178

152

127

102

76

51

25

102

50

960 980

267 356

229 305

191 254

152 203

114 152

76

38

0

0

960 980

0

0

0

910 920 940

Spring Deflection Millimeters

VARIABLE SPRING SUPPORTS


21

22

23

24

25

25

26

27

28

29

30

31

32

33

00

9

10

10

10

10

11

11

12

12

13

13

13

14

14

000

980

960

940

920

64

51

38

25

13

910

32

25

19

13

6

0.13 0.27

20

9

127

20

8

254 191

19

8

102

18

7

203 152

17

7

76

16

6

152 114

15

6

25

51

14

5

76

14

5

102

13

5

38

12

5

50

11

0

10

4

4

0

9

3

0

9

3

0

00*

940 920 910 000*

0

980 960

Working Range Millimeters

0

1

0.37 0.19 0.12 0.09

0.13

0.09

0.07

0.75

0.54

0.27

1

62

61

60

58

57

56

55

54

52

51

50

49

48

46

45

44

43

42

40

39

38

37

36

35

33

32

31

30

29

0

44

43

43

42

41

40

39

38

37

37

36

35

34

33

32

31

31

30

29

28

27

26

26

25

24

23

22

21

20

2

0.13

0.16

0.24

0.48

0.96

2

80

78

77

75

73

72

70

69

67

66

64

63

61

60

58

57

55

54

52

51

49

47

46

44

43

41

40

38

37

3

0.16

0.21

0.31

0.62

1.41

3

103

101

99

97

95

93

91

89

87

85

83

81

79

77

75

73

71

69

67

65

63

61

59

57

56

54

52

50

48

4

0.21

0.27

0.42

0.84

1.68

4

137

135

132

129

127

124

122

119

116

114

111

108

106

103

101

98

95

93

90

88

85

82

80

77

74

72

69

67

64

5

0.29

0.37

0.56

1.12

2.25

5

186

182

179

175

171

168

164

161

157

154

150

146

143

139

136

132

129

125

121

118

114

111

107

104

100

96

93

89

86

6

0.38

0.50

0.75

1.50

3.00

6

248

243

238

233

229

224

219

214

210

205

200

195

190

186

181

176

171

167

162

157

152

148

143

138

133

129

124

119

114

7

0.50

0.67

1.00

2.00

4.00

7

330

324

317

311

305

298

292

286

279

273

267

260

254

248

241

235

229

222

216

209

203

197

190

184

178

171

165

159

152

8

0.68

0.89

1.34

2.68

5.36

8

442

434

425

417

408

400

391

383

374

366

357

349

340

332

323

315

306

298

289

281

272

264

255

247

238

230

221

213

204

9

0.89

1.19

1.79

3.57

7.14

9

589

578

567

555

544

533

521

510

499

487

476

465

453

442

431

419

408

397

385

374

363

351

340

329

317

306

295

283

272

10

11

12

12

1327

1301

1276

1250

1224

1199

1173

1148

1122

1097

1071

1046

1020

995

969

944

918

893

867

842

816

791

765

740

714

689

663

638

612

SPRING SIZE

11

1002

983

964

944

925

906

886

867

848

829

809

790

771

752

732

713

694

675

655

636

617

597

578

559

540

520

501

482

463

1.16

1.55

2.32

4.64

9.28

1.52

2.02

3.04

6.07

12.14

2.02

2.68

4.02

8.03

16.07

SPRING RATE - Kg/mm

10

766

751

737

722

707

692

678

663

648

634

619

604

589

575

560

545

530

516

501

486

472

457

442

427

413

398

383

368

354

SPRING SIZE

2.68

3.57

5.36

10.71

21.43

13

1769

1735

1701

1667

1633

1599

1565

1531

1497

1463

1429

1395

1361

1327

1293

1259

1224

1190

1156

1122

1088

1054

1020

986

952

918

884

850

816

13

3.57

4.76

7.14

14.28

28.57

14

2358

2313

2267

2222

2177

2131

2086

2041

1995

1950

1905

1859

1814

1769

1723

1678

1633

1587

1542

1496

1451

1406

1360

1315

1270

1224

1179

1134

1088

14

LOAD TABLE IN KILOGRAMS

4.82

6.43

9.64

19.28

38.57

15

3184

3122

3061

3000

2939

2878

2816

2755

2694

2633

2571

2510

2449

2388

2327

2265

2204

2143

2082

2020

1959

1898

1837

1776

1714

1653

1592

1531

1469

15

SIZE AND SELECTION CHART

16

6.70

8.93

13.39

26.78

53.56

16

4422

4337

4252

4167

4082

3997

3912

3827

3741

3656

3571

3486

3401

3316

3231

3146

3061

2976

2891

2806

2721

2636

2551

2466

2381

2296

2211

2126

2041

17

8.93

11.90

17.85

35.71

71.42

17

5895

5782

5669

5555

5442

5329

5215

5102

4988

4875

4762

4648

4535

4422

4308

4195

4081

3968

3855

3741

3628

3515

3401

3288

3175

3061

2948

2834

2721

18

11.88

15.84

23.75

47.49

94.99

18

7746

7598

7451

7304

7156

7009

6861

6714

6567

6419

6272

6125

5977

5830

5682

5535

5388

5240

5093

4945

4798

4651

4503

4356

4209

4061

3914

3766

3619

19

20

20

13855

13588

13322

13055

12789

12522

12256

11990

11723

11457

11190

10924

10657

10391

10125

9858

9592

9325

9059

8792

8526

8260

7993

7727

7460

7194

6927

6661

6395

21

21

18424

18070

17715

17361

17007

16652

16298

15944

15589

15235

14881

14527

14172

13818

13464

13109

12755

12401

12046

11692

11338

10984

10629

10275

9921

9566

9212

8858

8503

22

22

24570

24098

23625

23153

22680

22208

21735

21263

20790

20318

19845

19373

18900

18428

17955

17483

17010

16538

16065

15593

15120

14648

14175

13703

13230

12758

12285

11813

11340

15.80

21.07

31.60

63.21

20.98

27.97

41.96

83.92

27.90

37.20

55.80

111.59

37.22

49.61

74.41

148.82

126.41 167.84 223.19 297.64

19

10435

10235

10034

9833

9633

9432

9231

9031

8830

8629

8429

8228

8027

7827

7626

7425

7224

7024

6823

6622

6422

6221

6020

5820

5619

5418

5218

5017

4816

910

44

38

32

25

19

13

6

102

76

51

25

102

152 203

114 152

76

50

920

89

76

940

178

152

960 980

267 356

229 305

64 127.0 191 254

51

38

25

13

38

0

0

960 980 0

0

0

910 920 940

Spring Deflection Millimeters

VARIABLE SPRING SUPPORTS

7


VARIABLE SPRING SUPPORTS TYPICAL NAMEPLATE DESIGNS

VARIABLE SPRING CUTAWAY DETAIL

IN. FIG. NO.

SIZE

CALIBRATED LOAD

TYPE

TRAVEL

SERIAL NUMBER

MARK NUMBER

LBS. 0 1/4 1/2 3/4 1 1 1/4

IN.

LBS. 0 1/2 1 1 1/2 2 2 1/2 LBS./IN.

S.R. TYPE

S.R.

HOT

SIZE COLD

MK.#

TYPE

SIZE

SERIAL NUMBER

FIGURE NO. 920

HOT

COLD

MK.# SERIAL NUMBER

FIGURE NO. 910

CLEVIS PIN WITH COTTERS

TYPE C PIN SELECTION TABLE

Figure 291 The Figure 291 is used with Type C Variable Springs to secure the spring to the structural connection. Material: Carbon Steel Finish: Plain, Hot-dip galvanized Ordering: Specify pin diameter, figure number, and finish. For Metric applications Specify Figure M291.

L E

W

H

8

D E

SPRING SIZE 000 TO 5 000 TO 5 6 TO 8 6 TO 8 9 TO 11 9 TO 11 12 AND 13 12 AND 13 14 AND 15 14 AND 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

PIN DIA. D 5⁄ 8 16 3⁄ 4 19 7⁄ 8 22 11⁄8 29 13⁄8 35 15⁄ 8 41 17⁄8 48 21⁄4 57 21⁄2 64 23⁄4 70 3 76 31⁄4 83

E

H

3⁄ 8

3⁄ 16

10 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19

5 3⁄ 16

5 1⁄ 4

6 1⁄ 4

6 5⁄ 16

8 5⁄ 16

8 7⁄ 16

11 7⁄ 16

11 7⁄ 16

11 7⁄ 16

11 7⁄ 16

11 7⁄ 16

11

L 3 76 3 76 4 102 5 127 51 ⁄ 2 140 6 152 7 178 71 ⁄ 4 184 8 203 8 203 81 ⁄ 4 210 81 ⁄ 2 216

W 21⁄4 57 21⁄4 57 31⁄4 83 41⁄4 108 41 ⁄ 2 114 5 127 53⁄4 146 6 152 63⁄4 171 63⁄4 171 63 ⁄ 4 171 7 178

MAX. RECOM. LOAD 1130 5027 1810 8052 2710 12055 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082 27200 120996 33500 149021 41580 184964 50580 225000


VARIABLE SPRING SUPPORTS COMPARATIVE SCALED DIFFERENCES

Figure 910

Figure 920

LOAD PRESET BAR AND TRAVEL STOP

Figure 940

Load Preset Bar

Banding

Position Indicator Line

Piston Plate

Figure 960

Travel Stop

Figure 980

MANUFACTURERS CONVERSION TABLE ANVIL INTERNATIONAL

BASIC ENGINEERS

BERGENPATERSON

BERGENPOWER

BINDER

CARPENTER & PATERSON

CARPENTER & PATERSON LTD.

82 B-268 98 Triple Quad

401 402 403 400

VS1 or 3100 VS2 or 3200 VS4 or 3400 VS6 or 3600 VS8

910 920 940 960 980

BV35 BV70 BV140

482 468 498

DV35 DV70 DV140 DV210

COMET/PSL

CENTRAL

FEE & MASON

FRONEK

GRINNELL

LEIBFRIED

NPS

V1 V2 V3

FSC-1 FSC-2 FSC-4 FSC-6

410 420 430

15 30 60 90

82 B-268 98 Triple Quad

S R D

VS VM VL

POWER PIPING

PHS INDUSTRIES

PIPING TECHNOLOGIES

PSC

SHAWFRONEK

500 600 700 800

910 920 940 960

PTP-1 PTP-2 PTP-4 PTP-6

910 920 960 980

12 25 50 75

9


VARIABLE SPRING SUPPORTS SERIES 910 - TYPE A

G

A

B

E

F

C

SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LGTH B 61 ⁄ 8 156 63 ⁄ 8 162 7 178 73 ⁄ 8 187 73 ⁄ 8 187 73 ⁄ 8 187 81 ⁄ 2 216 81 ⁄ 2 216 81 ⁄ 2 216 10 254 10 254 10 254 111⁄4 286 111⁄4 286 12 305 12 305 131⁄2 343 151⁄8 384 165⁄8 422 181⁄4 464 215⁄8 549 23 584 271⁄2 699

CASE DIA. C 4 102 4 102 4 102 9 5 ⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 75⁄8 194 8 203 75⁄8 194 83 ⁄ 8 213 77 ⁄ 8 200 75 ⁄ 8 194 9 229 83 ⁄ 8 213 81 ⁄ 8 206 101⁄4 260 101⁄4 260 11 279 107⁄8 276 10 1⁄2 267 113⁄8 289 113⁄8 289 127⁄8 327 141⁄4 362 16 406 173⁄8 441 203⁄8 518 213⁄4 552 263⁄4 679

MIN. THD. ROD APPROX. ENGM'T ENGM'T WGT F G EACH 7⁄ 8 7⁄ 8 7 22 22 3.2 7⁄ 8 7⁄ 8 8 22 22 3.6 7⁄ 8 7⁄ 8 9 22 22 4.1 7⁄ 8 7⁄ 8 12 22 22 5.4 7⁄ 8 7⁄ 8 13 22 22 5.9 7⁄ 8 7⁄ 8 14 22 22 6.4 11⁄8 1 20 29 25 9.1 1 1 ⁄8 1 20 29 25 9.1 11⁄8 1 22 29 25 10 1 3 1 ⁄4 1 ⁄8 40 32 35 18.1 11⁄4 13 ⁄ 8 43 32 35 19.5 1 3 1 ⁄4 1 ⁄8 50 32 35 22.7 15⁄8 15 ⁄ 8 57 41 41 25.9 5 5 1 ⁄8 1 ⁄8 64 41 41 29 13⁄4 2 68 44 51 30.8 13⁄4 2 88 44 51 39.9 2 21 ⁄ 8 106 51 54 48.1 5 3 2 ⁄8 2 ⁄8 143 67 60 64.9 27⁄8 25 ⁄ 8 251 73 67 113.9 1 5 3 ⁄2 2 ⁄8 284 89 67 128.8 37⁄8 31 ⁄ 8 387 98 79 175.5 1 1 4 ⁄4 4 ⁄8 430 108 105 195 41⁄4 41 ⁄ 8 577 108 105 261.7

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Note: Please see page 45 to calculate Rod Take-Out.

For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 10

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS FIGURE 910 TYPE B

A

T R H

A

E

B

A

F C

A-A

LUG HOLE DIAMETER

ROD CASE CASE SIZE LGTH. DIA. SIZE A B C 1⁄ 2 0 61⁄8 4 0 M12 156 102 1⁄ 2 1 63⁄8 4 1 M12 162 102 1⁄ 2 2 7 4 2 M12 178 102 1⁄ 2 3 73⁄8 59⁄16 3 M12 187 141 1⁄ 2 4 73⁄8 59⁄16 4 M12 187 141 1⁄ 2 5 73⁄8 59⁄16 5 M12 187 141 5⁄ 8 6 81⁄2 65 ⁄ 8 6 M16 216 168 5⁄ 8 7 81⁄2 65 ⁄ 8 7 M16 216 168 5⁄ 8 8 81⁄2 65 ⁄ 8 8 M16 216 168 3⁄ 4 9 10 85⁄8 9 M20 254 219 3⁄ 4 10 10 85⁄8 10 M20 254 219 3⁄ 4 11 10 85⁄8 11 M20 254 219 12 1 111⁄4 85 ⁄ 8 12 M24 286 219 13 1 111⁄4 85 ⁄ 8 13 M24 286 219 14 1 1⁄ 4 12 85⁄8 14 M30 305 219 15 1 1⁄ 4 12 85⁄8 15 M30 305 219 16 1 1⁄ 2 131⁄2 85 ⁄ 8 16 M36 343 219 17 1 3⁄ 4 151⁄8 85⁄8 17 M42 384 219 18 2 165⁄8 123⁄4 18 M48 422 324 19 2 1⁄ 4 181⁄4 123⁄4 19 M56 464 324 20 2 1⁄ 2 215⁄8 123⁄4 20 M64 549 324 21 2 3⁄ 4 23 123⁄4 21 M72 584 324 22 3 271⁄2 123⁄4 22 M80x6 699 324

E 91⁄8 232 91⁄2 241 91 ⁄ 8 232 97 ⁄ 8 251 93 ⁄ 8 238 91 ⁄ 8 232 101⁄2 267 97 ⁄ 8 251 95 ⁄ 8 244 113⁄4 298 113⁄4 298 121⁄2 318 127⁄8 327 121⁄2 318 143⁄8 365 143⁄8 365 157⁄8 403 171⁄4 438 20 508 217⁄8 556 247⁄8 632 261⁄4 667 313⁄4 806

MIN. HGT. THD. OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 4 11⁄2 32 38 11 ⁄ 4 11⁄2 32 38 11 ⁄ 4 11⁄2 32 38 15 ⁄ 8 2 41 51 15 ⁄ 8 2 41 51 13 ⁄ 4 3 44 76 13 ⁄ 4 3 44 76 2 3 51 76 25 ⁄ 8 3 67 76 27⁄ 8 4 73 102 31 ⁄ 2 41 ⁄ 2 89 114 37 ⁄ 8 41⁄2 98 114 41 ⁄ 4 4 108 114 41 ⁄ 4 5 108 127

R 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 2 51 2 51 2 1⁄ 2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT. DIA. EACH 11⁄ 16 7 17 3.2 11⁄ 16 8 17 3.6 11⁄ 16 9 17 4.1 11⁄ 16 12 17 5.4 11⁄ 16 13 17 5.9 11⁄ 16 14 17 6.4 13⁄ 16 20 21 9.1 13⁄ 16 20 21 9.1 13⁄ 16 22 21 10 15⁄ 16 40 24 18 15⁄ 16 43 24 20 15⁄ 16 50 24 23 11⁄4 57 32 26 11⁄4 64 32 29 11⁄2 68 38 31 11⁄2 88 38 40 13⁄4 106 44 48 2 143 51 65 23⁄8 251 60 114 25⁄8 284 67 129 2 7⁄ 8 387 73 176 31⁄ 8 430 79 195 33⁄ 8 577 86 262

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 11


VARIABLE SPRING SUPPORTS SERIES 910 - TYPE C

S

A T

R H A

E

B

A

F C

A-A

LUG HOLE DIAMETER

ROD CASE SIZE LGTH. SIZE A B 1⁄ 2 0 61⁄8 0 M12 156 1⁄ 2 1 63⁄8 1 M12 162 1⁄ 2 2 63⁄4 2 M12 171 1⁄ 2 3 73⁄8 3 M12 187 1⁄ 2 4 73⁄8 4 M12 187 1⁄ 2 5 73⁄8 5 M12 187 5⁄ 8 6 81⁄2 6 M16 216 5⁄ 8 7 81⁄2 7 M16 216 5⁄ 8 8 81⁄2 8 M16 216 3⁄ 4 9 10 9 M20 254 3⁄ 4 10 10 10 M20 254 3⁄ 4 11 10 11 M20 254 12 1 111⁄4 12 M24 286 13 1 111⁄4 13 M24 286 14 11⁄4 12 14 M30 305 15 11⁄4 12 15 M30 305 16 11⁄2 131⁄2 16 M36 343 17 13⁄4 151⁄8 17 M42 384 18 2 165⁄8 18 M48 422 19 21⁄4 181⁄4 19 M56 464 20 21⁄2 215⁄8 20 M64 549 21 23⁄4 23 21 M72 584 22 3 271⁄2 22 M80x6 699

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 91⁄8 232 91⁄2 241 91⁄8 232 97⁄8 251 93⁄8 238 91⁄8 232 101⁄2 267 97⁄8 251 95⁄8 244 113⁄4 298 113⁄4 298 121⁄2 318 127⁄8 327 121⁄2 318 143⁄8 365 143⁄8 365 157⁄8 403 171⁄4 438 20 508 217⁄8 556 247⁄8 632 261⁄4 667 313⁄4 806

MIN. HGT. THD. OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 15⁄8 2 41 51 15⁄8 2 41 51 13⁄4 3 44 76 13⁄4 3 44 76 2 3 51 76 25⁄8 3 67 76 2 7⁄ 8 4 73 102 31⁄2 41⁄2 89 114 37⁄8 41⁄2 98 114 41⁄4 41⁄2 108 114 41⁄4 5 108 127

R 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 2 38 11 ⁄ 2 38 2 51 2 51 21 ⁄ 2 64 21 ⁄ 2 64 3 76 3 76 4 102 4 102 4 102

S 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄16 27 11⁄16 27 11⁄16 27 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 2 51 2 51 23⁄8 60 23⁄8 60 2 7⁄ 8 73 31 ⁄ 8 79 33 ⁄ 8 86 35 ⁄ 8 92 3 7⁄ 8 98

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT DIA. EACH 11⁄ 16 7 17 3.2 11⁄ 16 8 17 3.6 11⁄ 16 9 17 4.1 11⁄ 16 12 17 5.4 11⁄ 16 13 17 5.9 11⁄ 16 14 17 6.4 13⁄ 16 20 21 9.1 13⁄ 16 20 21 9.1 13⁄ 16 22 21 10 15⁄ 16 40 24 18 15⁄ 16 43 24 20 15⁄ 16 50 24 23 11 ⁄ 4 57 32 26 11 ⁄ 4 64 32 29 11 ⁄ 2 68 38 31 11 ⁄ 2 88 38 40 13 ⁄ 4 106 44 48 2 143 51 65 23 ⁄ 8 251 60 114 25 ⁄ 8 284 67 129 27⁄8 387 73 176 31⁄8 430 79 195 33⁄8 577 86 262

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 Note: Please see page 45 to calculate Rod Take-Out.

For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 12

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 910 TYPE D

A ROD, NUTS, AND WASHER NOT FURNISHED M

E

B

C

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LENGTH B 61 ⁄ 8 156 63 ⁄ 8 162 7 178 73 ⁄ 8 187 73 ⁄ 8 187 73 ⁄ 8 187 81 ⁄ 2 216 81 ⁄ 2 216 81 ⁄ 2 216 10 254 10 254 10 254 111⁄4 286 111⁄4 286 12 305 12 305 131⁄2 343 151⁄8 384 165⁄8 422 181⁄4 464 215⁄8 549 23 584 271⁄2 699

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65 ⁄ 8 168 65 ⁄ 8 168 65 ⁄ 8 168 85⁄8 219 85⁄8 219 85⁄8 219 85 ⁄ 8 219 85 ⁄ 8 219 85⁄8 219 85⁄8 219 85 ⁄ 8 219 85 ⁄ 8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 91⁄2 241 93⁄8 238 10 254 103⁄8 264 103⁄8 264 103⁄8 264 113⁄4 298 113⁄4 298 113⁄4 298 133⁄4 349 133⁄4 349 133⁄4 349 155⁄8 397 155⁄8 397 171⁄8 435 17 432 191⁄4 489 211⁄2 546 235⁄8 600 257⁄8 657 295⁄8 752 315⁄8 752 37 940

HGT. OF APPROX. SPACER WEIGHT M EACH 21⁄4 6 57 2.7 21⁄4 6 57 2.7 21⁄4 7 57 3.2 21⁄4 10 57 4.5 21⁄4 11 57 5 21⁄4 12 57 5.4 23⁄8 18 60 8.2 23⁄8 17 60 7.7 23⁄8 20 60 9.1 25⁄8 36 67 16 25⁄8 39 67 18 25⁄8 46 67 21 27⁄8 50 73 23 27⁄8 57 73 26 31⁄4 59 83 27 31 ⁄ 8 77 79 35 31⁄2 95 89 43 33⁄4 128 95 58 4 230 102 104 41⁄4 258 108 117 41⁄4 342 108 155 41⁄2 379 114 172 5 485 127 220

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 13


VARIABLE SPRING SUPPORTS SERIES 910 TYPE E

C

MUST BE TACK WELDED BY CUSTOMER

B

R.H. AND L.H. ROD AND NUT NOT FURNISHED, LENGTH TO SUIT CUSTOMER REQUIREMENT

F

L.H. THD.

6" MUST BE TACK WELDED BY CUSTOMER

A

F TURNBUCKLE IS FURNISHED

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄ 4 M30 11⁄ 4 M30 11⁄ 2 M36 13⁄ 4 M42 2 M48 21⁄ 4 M56 21⁄ 2 M64 23⁄ 4 M72 3 M80X6

CASE LENGTH B 61⁄8 156 63⁄8 162 7 178 73⁄8 187 73⁄8 187 73⁄8 187 81⁄2 216 81⁄2 216 81⁄2 216 10 254 10 254 10 254 111⁄4 286 111⁄4 286 12 305 12 305 131⁄2 343 151⁄8 384 165⁄8 422 181⁄4 464 215⁄8 549 23 584 271⁄2 699

CASE MIN. THD. DIAMETER ENGM'T C F 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 59⁄16 141 22 7⁄ 8 5 9⁄16 141 22 7⁄ 8 5 9⁄16 141 22 65 ⁄ 8 11⁄8 168 29 65 ⁄ 8 11⁄8 168 29 65 ⁄ 8 11⁄8 168 29 85⁄8 11⁄4 219 32 85⁄8 11⁄4 219 32 85⁄8 11⁄4 219 32 85 ⁄ 8 15⁄8 219 41 85 ⁄ 8 15⁄8 219 41 85⁄8 13⁄4 219 44 85⁄8 13⁄4 219 44 85 ⁄ 8 2 219 51 5 8 ⁄8 25⁄8 219 67 123⁄4 27⁄8 324 73 123⁄4 31⁄2 324 89 123⁄4 37⁄8 324 98 123⁄4 41⁄4 324 108 123⁄4 41⁄4 324 108

APPROX. WEIGHT EACH 6 2.7 6 2.7 7 3.2 10 4.5 11 5 12 5.4 17 7.7 18 8.2 20 9.1 36 16 39 18 46 21 50 23 57 26 59 27 77 35 95 43 128 58 230 104 258 117 342 155 379 172 485 220

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 14

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 910 - TYPE F CASE CASE BOTTOM LNGTH. DIA. FLANGE SIZE B C BOLT DIA.

IN.

LBS. 0 1/4 1/2 3/4 1 1 1/4

S.R. TYPE HOT

SIZE COLD

MK.# SERIAL NUMBER

FIGURE NO. 910

X

B

BO

LT

C

IR

C

LE

C

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

45⁄8 117 47⁄8 124 5 1⁄2 140 51⁄8 130 51⁄2 140 57⁄8 149 57⁄8 149 57⁄8 149 65⁄8 168 73⁄8 187 77⁄8 200 61⁄2 165 67⁄8 175 81⁄4 210 81⁄2 216 83⁄4 222 10 254 111⁄4 286 121⁄8 308 131⁄8 333 151⁄4 387 157⁄8 403 201⁄8 511

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20

BOTTOM FLANGE

x 71⁄2 x 71⁄2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 3⁄ 8 x 9 x 9 9 x 229 x 229 3⁄ 8 x 9 x 9 9 x 229 x 229 3⁄ 8 x 9 x 9 9 x 229 x 229 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 1⁄ 2 x131⁄ 4 x131⁄ 4 13 x 337 x 337 5⁄ 8 x171⁄ 4 x171⁄ 4 16 x 438 x 438 5⁄ 8 x171⁄ 4 x171⁄ 4 16 x 438 x 438 5⁄ 8 x171⁄ 4 x171⁄ 4 16 x 438 x 438 5⁄ 8 x171⁄ 4 x171⁄ 4 16 x 438 x 438 5⁄ 8 x171⁄ 4 x171⁄ 4 16 x 438 x 438 1⁄ 4

BOLT OVERALL LOAD LOAD APPROX. CIRCLE LNGTH. X ** FLANGE FLANGE WGT. MIN. MAX. MIN. MAX. DIA. THICK. EACH

7 178 7 178 7 178 73⁄4 197 73⁄4 197 73⁄4 197 91⁄4 235 91⁄4 235 91⁄4 235 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400

93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 101⁄2 267 101⁄2 267 101⁄2 267 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 21 533 21 533 21 533 21 533 21 533

61⁄8 156 63⁄8 162 7 178 61⁄2 165 67⁄8 175 71⁄4 184 71⁄2 191 81⁄8 206 83⁄8 213 93⁄8 238 97⁄8 251 81⁄2 216 87⁄8 225 101⁄4 260 101⁄2 267 103⁄4 273 12 305 131⁄4 337 137⁄8 352 147⁄8 378 17 432 18 457 221⁄4 565

65⁄8 168 67⁄8 175 7 1⁄ 2 191 71⁄8 181 71⁄2 191 77⁄8 200 8 203 83⁄4 222 9 229 103⁄8 264 107⁄8 276 91⁄2 241 97⁄8 251 111⁄4 286 111⁄2 292 113⁄4 298 13 330 141⁄4 362 147⁄8 378 157⁄8 403 18 457 19 483 231⁄4 591

37⁄8 98 37⁄8 98 37⁄8 98 53⁄8 137 53⁄8 137 53⁄8 137 63⁄8 162 63⁄8 162 63⁄8 162 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 8 3⁄ 8 213 83⁄8 213 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318

1⁄ 4

6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13

12 5.4 12 5.4 13 5.9 18 8.2 20 9.1 21 9.5 33 15 33 15 35 16 68 31 71 32 74 34 78 35 81 37 84 38 98 44 113 51 138 63 253 115 271 123 337 153 356 161 443 201

** The Installed Height should be the mid-point between the Maximum and Minimum Overall Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Installed Height, and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 15


VARIABLE SPRING SUPPORTS

A

F

C-C Rod Dimension as specified by customer

E

P

FIGURE NO. 910

FIGURE NO. 910

NUMBER SERIAL

NUMBER SERIAL

MK.#

B

MK.#

HOT TYPE

W

COLD SIZE

HOT

S.R.

S.R.

1 1/4 1 3/4 1/2 1/4 0 IN.

COLD SIZE

TYPE

1 1/4 1 3/4 1/2 1/4 0

LBS.

IN.

LBS.

C

FIGURE 910 TYPE G HANGER SIZE

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A

CASE LENGTH B

CASE DIAMETER C

E

1⁄ 2

61 ⁄ 8 156 63 ⁄ 8 162 7 178 73 ⁄ 8 187 73 ⁄ 8 187 73 ⁄ 8 187 81 ⁄ 2 216 81 ⁄ 2 216 81 ⁄ 2 216 10 254 10 254 10 254 111⁄4 286 111⁄4 286 12 305 12 305 131⁄2 343 151⁄8 384 165⁄8 422 181⁄4 464 215⁄8 549 23 584 271⁄2 699

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 8 5⁄ 8 219 8 5⁄ 8 219 8 5⁄ 8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 8 5⁄ 8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

23⁄8 60 23⁄8 60 23⁄ 8 60 27 ⁄ 8 73 27 ⁄ 8 73 27 ⁄ 8 73 31 ⁄ 8 79 31 ⁄ 8 79 31 ⁄ 8 79 41 ⁄ 4 108 41 ⁄ 4 108 41 ⁄ 4 108 55 ⁄ 8 143 55 ⁄ 8 143 53 ⁄ 4 146 53 ⁄ 4 146 6 152 65 ⁄ 8 168 67 ⁄ 8 175 71 ⁄ 2 191 77 ⁄ 8 200 81 ⁄ 4 210 81 ⁄ 4 210

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 1 1⁄ 4 M30 1 1⁄ 4 M30 1 1⁄ 2 M36 1 3⁄ 4 M42 2 M48 2 1⁄ 4 M56 2 1⁄ 2 M64 2 3⁄ 4 M72 3 M80x6

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 16

MIN. THD. ENGM'T F 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄8 29 11⁄8 29 11⁄8 29 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 13⁄4 44 13⁄4 44 2 51 25⁄8 67 27⁄8 73 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

Ordering: Specify Figure Number (Travel Series), Type, Size, Total Load, Hot Load per spring, Cold Load per spring, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Center to Center of Rods dimension and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

CHANNEL SIZE

MAX. C-C

C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C15 x 33.9 C380 x 50 C15 x 33.9 C380 x 50

24 610 24 610 24 610 30 762 30 762 30 762 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 33 838 36 914 36 914 36 914 42 1067 42 1067 40 1016 48 1219 48 1219

CHANNEL SPACING W 5⁄ 8

16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 11⁄2 38 21⁄8 54 21 ⁄ 8 54 21⁄8 54 25⁄8 67 25⁄8 67 25⁄8 67 31⁄8 79 33⁄8 86

P

APPROX. WEIGHT EACH

11 ⁄ 2 38 11 ⁄ 2 38 11 ⁄ 2 38 2 51 2 51 2 51 2 51 2 51 2 51 3 76 3 76 3 76 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102

25 11.3 25 11.3 26 11.8 32 14.5 35 15.9 37 16.8 49 22.2 48 21.8 53 24 86 39 92 41.7 109 49.4 121 54.9 138 62.6 144 65.3 190 86.2 226 102.5 300 136.1 518 235 582 264 763 346.1 874 396.4 1163 527.5


VARIABLE SPRING SUPPORTS SERIES 920 - TYPE A G

A

B

E

F

C

SIZE 000 000 00 00 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LNGTH B 8 203 91 ⁄ 4 235 97 ⁄ 8 251 97 ⁄ 8 251 97 ⁄ 8 251 10 254 10 254 10 254 113⁄4 298 113⁄4 298 113⁄4 298 121⁄2 318 133⁄4 349 121⁄2 318 13 330 155⁄8 397 161⁄2 419 161⁄2 419 19 483 211⁄4 540 203⁄4 527 231⁄2 597 291⁄4 743 323⁄8 822 385⁄8 981

CASE DIA. C 4 102 4 102 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 6 5⁄ 8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 77⁄8 200 87⁄8 225 91⁄2 241 91⁄2 241 91⁄2 241 95 ⁄ 8 244 95 ⁄ 8 24 1 95 ⁄ 8 24 111⁄4 286 111⁄4 286 111⁄4 286 121⁄8 308 133⁄8 340 121⁄8 308 125⁄8 321 151⁄4 387 16 406 16 406 185⁄8 473 205⁄8 524 203⁄8 518 231⁄8 587 287⁄8 733 32 813 385⁄8 981

MIN. THD. ROD APPRX. ENGM'T ENGM'T WGT. F G EACH 7⁄ 8 7⁄ 8 6 22 22 2.7 7⁄ 8 7⁄ 8 7 22 22 3.2 7⁄ 8 7⁄ 8 10 22 22 4.5 7⁄ 8 7⁄ 8 11 22 22 5 7⁄ 8 7⁄ 8 12 22 22 5.4 7⁄ 8 7⁄ 8 17 22 22 7.7 7⁄ 8 7⁄ 8 19 22 22 8.6 7⁄ 8 7⁄ 8 20 22 22 9.1 11⁄8 11 ⁄ 8 28 29 29 13 11⁄8 11 ⁄ 8 29 29 29 13 11⁄8 11 ⁄ 8 32 29 29 15 11⁄4 11 ⁄ 4 54 32 32 24 11⁄4 11 ⁄ 4 67 32 32 30 11⁄4 11 ⁄ 4 68 32 32 31 15⁄8 15 ⁄ 8 76 41 41 34 15⁄8 15 ⁄ 8 85 41 41 39 13⁄4 13 ⁄ 4 90 44 44 41 13⁄4 13 ⁄ 4 120 44 44 54 2 2 156 51 51 71 25 ⁄ 8 25 ⁄ 8 211 67 67 96 27⁄8 27 ⁄ 8 338 73 73 153 31⁄2 31 ⁄ 2 382 89 89 173 37⁄8 37 ⁄ 8 546 98 98 248 41⁄4 41 ⁄ 4 601 108 108 273 41⁄4 41 ⁄ 4 811 108 108 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920 For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 17


VARIABLE SPRING SUPPORTS FIGURE 920 TYPE B A

T R H

A

E

B

F

A C

A-A

LUG HOLE DIAMETER

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 18

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

ROD CASE CASE SIZE LNGTH. DIA. SIZE A B C 1⁄ 2 000 8 4 000 M12 203 102 1⁄ 2 00 91⁄4 4 00 M12 235 102 1⁄ 2 0 97⁄8 4 0 M12 251 102 1⁄ 2 1 97⁄8 4 1 M12 251 102 1⁄ 2 2 97⁄8 4 2 M12 251 102 1⁄ 2 3 10 59⁄16 3 M12 254 141 1⁄ 2 4 10 59⁄16 4 M12 254 141 1⁄ 2 5 10 59⁄16 5 M12 254 141 5⁄ 8 6 113⁄4 65⁄8 6 M16 298 168 5⁄ 8 7 113⁄4 65⁄8 7 M16 298 168 5⁄ 8 8 113⁄4 65⁄8 8 M16 298 168 3⁄ 4 9 121⁄2 85⁄8 9 M20 318 219 3⁄ 4 10 133⁄4 85⁄8 10 M20 349 219 3⁄ 4 11 121⁄2 85⁄8 11 M20 318 219 12 1 13 85⁄8 12 M24 330 219 13 1 155⁄8 85⁄8 13 M24 397 219 14 1 1⁄ 4 161⁄2 85⁄8 14 M30 419 219 15 1 1⁄ 4 161⁄2 85⁄8 15 M30 419 219 16 1 1⁄ 2 19 85⁄8 16 M36 483 219 17 1 3⁄ 4 211⁄4 85⁄8 17 M42 540 219 18 2 203⁄4 123⁄4 18 M48 527 324 19 2 1⁄ 4 231⁄2 123⁄4 19 M56 597 324 20 2 1⁄ 2 291⁄4 123⁄4 20 M64 743 324 21 2 3⁄ 4 323⁄8 123⁄4 21 M72 822 324 22 3 385⁄8 123⁄4 22 M80x6 981 324

E 91 ⁄ 8 232 101⁄8 257 11 279 11 279 11 279 111⁄8 283 111⁄8 283 111⁄8 283 123⁄4 324 123⁄4 324 123⁄4 324 135⁄8 346 147⁄8 378 135⁄8 346 145⁄8 371 171⁄4 438 19 483 19 483 215⁄8 549 235⁄8 600 243⁄8 619 275⁄8 702 333⁄8 848 361⁄2 927 435⁄8 1108

MIN. HGT. THREAD OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 15⁄8 2 41 51 15⁄8 2 41 51 13⁄4 3 44 76 13⁄4 3 44 76 2 3 51 76 25⁄8 3 67 76 27⁄8 4 73 102 31⁄2 41⁄2 89 114 37⁄8 41⁄2 98 114 41⁄4 41⁄2 108 114 41⁄4 5 108 127

R 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11⁄2 38 11⁄2 38 11⁄2 38 2 51 2 1⁄ 2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WEIGHT DIA. EACH 11⁄ 16 6 17 2.7 11⁄ 16 7 17 3.2 11⁄ 16 10 17 4.5 11⁄ 16 11 17 5 11⁄ 16 12 17 5.4 11⁄ 16 17 17 7.7 11⁄ 16 19 17 8.6 11⁄ 16 20 17 9.1 13⁄ 16 28 21 13 13⁄ 16 29 21 13 13⁄ 16 32 21 15 15⁄ 16 54 24 24 15⁄ 16 67 24 30 15⁄ 16 68 24 31 11⁄4 76 32 34 11⁄4 85 32 39 11⁄2 90 38 41 11⁄2 120 38 54 13⁄4 156 44 71 2 211 51 96 23⁄8 338 60 153 25⁄8 382 67 173 2 7⁄ 8 546 73 248 3 1⁄ 8 601 79 273 33⁄ 8 811 86 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.


VARIABLE SPRING SUPPORTS SERIES 920 - TYPE C S

A T

R H A

E

B

F

A C

A-A

LUG HOLE DIAMETER

ROD CASE SIZE LNGTH SIZE A B 1⁄ 2 000 8 000 M12 203 1⁄ 2 00 91⁄4 00 M12 235 1⁄ 2 0 97⁄8 0 M12 251 1⁄ 2 1 97⁄8 1 M12 251 1⁄ 2 2 97⁄8 2 M12 251 1⁄ 2 3 10 3 M12 254 1⁄ 2 4 10 4 M12 254 1⁄ 2 5 10 5 M12 254 5⁄ 8 6 113⁄4 6 M16 298 5⁄ 8 7 113⁄4 7 M16 298 5⁄ 8 8 113⁄4 8 M16 298 3⁄ 4 9 121⁄2 9 M20 318 3⁄ 4 10 133⁄4 10 M20 349 3⁄ 4 11 121⁄2 11 M20 318 12 1 13 12 M24 330 13 1 155⁄8 13 M24 397 14 11⁄4 161⁄2 14 M30 419 15 11⁄4 161⁄2 15 M30 419 16 11⁄2 19 16 M36 483 17 13⁄4 211⁄4 17 M42 540 18 2 20 3⁄4 18 M48 527 19 21⁄4 231⁄2 19 M56 597 291⁄4 20 21⁄2 20 M64 743 21 23⁄4 323⁄8 21 M72 822 22 3 385⁄8 22 M80x6 981

CASE DIA. C 4 102 4 102 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 85⁄8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 91⁄8 232 101⁄8 257 11 279 11 279 11 279 111⁄8 283 111⁄8 283 111⁄8 283 123⁄4 324 123⁄4 324 123⁄4 324 135⁄8 346 147⁄8 378 135⁄8 346 145⁄8 371 171⁄4 438 19 483 19 483 215⁄8 549 235⁄8 600 243⁄8 619 275⁄8 702 333⁄8 848 361⁄2 927 435⁄8 1108

MIN. THD. HGT. ENGM'T OF PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 15⁄8 2 41 51 15⁄8 2 41 51 13 ⁄ 4 3 44 76 13 ⁄ 4 3 44 76 2 3 51 76 25⁄8 3 67 76 27⁄8 4 73 102 31⁄2 41⁄2 89 114 37⁄8 41⁄2 98 114 41⁄4 41⁄2 108 114 41⁄4 5 108 127

R 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11 ⁄ 2 38 11 ⁄ 2 38 11 ⁄ 2 38 2 51 21⁄2 64 21 ⁄ 2 64 3 76 3 76 4 102 4 102 4 102

S 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄16 27 11⁄16 27 11⁄16 27 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 2 51 2 51 23⁄8 60 23⁄8 60 2 7⁄ 8 73 31 ⁄ 8 79 33 ⁄ 8 86 35 ⁄ 8 92 3 7⁄ 8 98

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WEIGHT DIA. EACH 11⁄ 16 6 17 2.7 11⁄ 16 7 17 3.2 11⁄ 16 10 17 4.5 11⁄ 16 11 17 5 11⁄ 16 12 17 5.4 11⁄ 16 17 17 7.7 11⁄ 16 19 17 8.6 11⁄ 16 20 17 9.1 13⁄ 16 28 21 13 13⁄ 16 29 21 13 13⁄ 16 32 21 15 15⁄ 16 54 24 24 15⁄ 16 67 24 30 15⁄ 16 68 24 31 11⁄4 76 32 34 11⁄4 85 32 39 11⁄2 90 38 41 11⁄2 120 38 54 13⁄4 156 44 71 2 211 51 96 23⁄8 338 60 153 25⁄8 382 67 173 27 ⁄ 8 546 73 248 31 ⁄ 8 601 79 273 33 ⁄ 8 811 86 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate DIMENSIONS TEMPERATURE LOADS WEIGHT Rod Take-Out. INCHES FAHRENHEIT MILLIMETERS CELSIUS

POUNDS NEWTONS

POUNDS KILOGRAMS

19


VARIABLE SPRING SUPPORTS SERIES 920 TYPE D A ROD, NUTS, AND WASHER NOT FURNISHED M

E B

C

HANGER SIZE 000 000 00 00 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M36 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LENGTH B 8 203 91 ⁄ 4 235 97 ⁄ 8 251 97 ⁄ 8 251 97 ⁄ 8 251 10 254 10 254 10 254 113⁄4 298 113⁄4 298 113⁄4 298 121⁄2 318 133⁄4 349 121⁄2 318 13 330 155⁄8 397 161⁄2 419 161⁄2 419 19 483 211⁄4 540 203⁄4 527 231⁄2 597 291⁄4 743 323⁄8 822 385⁄8 981

CASE DIA. C 4 102 4 102 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65 ⁄ 8 168 65 ⁄ 8 168 65 ⁄ 8 168 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 8 5⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 8 5⁄ 8 219 85 ⁄ 8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 123⁄4 324 14 356 145⁄8 371 145⁄8 371 145⁄8 371 143⁄4 375 143⁄4 375 143⁄4 375 1611⁄16 424 1611⁄16 424 1611⁄16 424 18 457 191⁄4 489 18 457 191⁄8 486 213⁄4 552 233⁄8 594 231⁄4 591 261⁄2 673 293⁄8 746 291⁄2 749 327⁄8 835 39 991 423⁄4 1086 481⁄8 1222

HGT OF APPROX. SPACER WEIGHT M EACH 4 6 102 2.7 4 7 102 3.2 4 8 102 3.6 4 9 102 4.1 4 10 102 4.5 4 14 102 6.4 4 16 102 7.3 4 19 102 8.6 4 25 102 11 4 25 102 11 4 29 102 13 43 ⁄ 8 50 111 23 43⁄8 54 111 24 43 ⁄ 8 64 111 29 45⁄8 70 117 32 45⁄8 79 117 36 5 84 127 38 47⁄8 111 124 50 51⁄4 142 133 64 51⁄2 190 140 86 53⁄4 311 146 141 6 348 152 158 6 487 152 221 61⁄4 534 159 242 5 714 127 324

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920 For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 20

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 920 TYPE E C MUST BE TACK WELDED BY CUSTOMER

B

R.H. AND L.H. ROD AND NUT NOT FURNISHED, LENGTH TO SUIT CUSTOMER REQUIREMENT

F

L.H. THD.

6" MUST BE TACK WELDED BY CUSTOMER

A

F TURNBUCKLE IS FURNISHED

HANGER SIZE 000 000 00 00 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄ 4 M30 11⁄ 4 M30 11⁄ 2 M36 13⁄ 4 M36 2 M48 21⁄ 4 M56 21⁄ 2 M64 23⁄ 4 M72 3 M80x6

CASE LENGTH B 8 203 91⁄4 235 97⁄8 251 97⁄8 251 97⁄8 251 10 254 10 254 10 254 113⁄4 298 113⁄4 298 113⁄4 298 121⁄2 318 133⁄4 349 121⁄2 318 13 330 155⁄8 397 161⁄2 419 161⁄2 419 19 483 211⁄4 540 203⁄4 527 231⁄2 597 291⁄4 743 323⁄8 822 385⁄8 981

CASE MIN. THD. DIAMETER ENGM'T C F 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 65 ⁄ 8 11 ⁄ 8 168 29 65 ⁄ 8 11 ⁄ 8 168 29 65 ⁄ 8 11 ⁄ 8 168 29 85 ⁄ 8 11 ⁄ 4 219 32 85 ⁄ 8 11 ⁄ 4 219 32 85 ⁄ 8 11 ⁄ 4 219 32 85⁄8 15 ⁄ 8 219 41 85 ⁄ 8 15 ⁄ 8 219 41 85 ⁄ 8 13 ⁄ 4 219 44 85 ⁄ 8 13 ⁄ 4 219 44 85⁄8 2 219 51 85 ⁄ 8 25 ⁄ 8 219 67 123⁄4 27 ⁄ 8 324 73 123⁄4 31 ⁄ 2 324 89 123⁄4 37 ⁄ 8 324 98 123⁄4 41 ⁄ 4 324 108 123⁄4 41 ⁄ 4 324 108

APPROX. WEIGHT EACH 6 2.7 7 3.2 8 3.6 9 4.1 10 4.5 14 6.4 16 7.3 19 8.6 25 11 25 11 29 13 50 23 54 24 64 29 70 32 79 36 84 38 111 50 142 64 190 86 311 141 348 158 487 221 534 242 714 324

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920 For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 21


VARIABLE SPRING SUPPORTS SERIES 920 - TYPE F SIZE IN.

LBS.

0 1/2 1 1 1/2 2 2 1/2

S.R.

LBS./IN.

TYPE

SIZE HOT

COLD

MK. # SERIAL NUMBER

X

FIGURE NO.920

B

BO

LT

C

IR

C

LE

C

CASE CASE BOTTOM LNGTH DIA. FLANGE B C BOLT DIA.

000 000 00 00 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

61⁄4 159 71⁄2 191 63⁄4 171 75⁄8 194 83⁄8 213 75⁄8 194 81⁄4 210 87⁄8 225 83⁄8 213 93⁄4 248 101⁄4 260 101⁄2 267 113⁄4 298 95⁄8 244 101⁄8 257 123⁄4 324 127⁄8 327 131⁄8 333 151⁄2 394 171⁄2 445 173⁄8 441 195⁄8 498 227⁄8 581 25 635 311⁄2 800

4 102 4 102 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19

BOTTOM FLANGE

x 71⁄2 x 71⁄2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 1⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 190 x 190 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 1⁄ 4

BOLT OVERALL LOAD LOAD APPROX. CIRCLE LENGTH X ** FLANGE FLANGE WEIGHT MIN. MAX. MIN. MAX. DIA. THICK. EACH

7 178 7 178 7 178 7 178 7 178 73⁄4 197 73⁄4 197 73⁄4 197 93⁄16 233 93⁄16 233 93⁄16 233 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400

9 3⁄ 4 248 9 3⁄ 4 248 9 3⁄ 4 248 9 3⁄ 4 248 9 3⁄ 4 248 93⁄4 248 93⁄4 248 93⁄4 248 111⁄2 292 111⁄2 292 111⁄2 292 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 21 533 21 533 21 533 21 533 21 533

73⁄4 197 9 229 81⁄4 210 91⁄8 232 97⁄8 251 91⁄8 232 93⁄4 248 103⁄8 264 101⁄8 257 115⁄8 295 12 305 121⁄2 318 133⁄4 349 115⁄8 295 121⁄8 308 143⁄4 375 147⁄8 378 151⁄8 384 171⁄2 445 191⁄2 495 191⁄2 495 213⁄4 552 25 635 273⁄4 705 341⁄8 867

93⁄4 248 11 279 101⁄4 260 111⁄8 283 117⁄8 302 111⁄8 283 113⁄4 298 123⁄8 314 121⁄8 308 135⁄8 346 14 356 141⁄2 368 153⁄4 400 135⁄8 346 141⁄8 359 163⁄4 425 167⁄8 429 171⁄8 435 191⁄2 495 211⁄2 546 211⁄2 546 233⁄4 603 27 686 293⁄4 756 361⁄8 918

37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 53⁄8 137 53⁄8 137 53⁄8 137 63⁄8 162 63⁄8 162 6 3⁄ 8 162 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318

1⁄ 4

6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13

11 5 12 5.4 15 6.8 15 6.8 16 7.3 23 10 26 12 27 12 42 19 42 19 46 21 83 38 88 40 93 42 100 45 104 47 110 50 134 61 162 73 203 92 337 153 366 166 485 220 513 233 675 306

** The Installed Height should be the mid-point between the Maximum and Minimum Overall Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Installed Height, and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 22

For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920.

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS

A

C-C Rod Dimension as specified by customer F

E

P

FIGURE NO.920

FIGURE NO.920

NUMBER SERIAL

NUMBER SERIAL

MK. #

COLD

B

MK. #

HOT

COLD

W

TYPE

SIZE LBS./IN.

S.R.

SIZE LBS./IN.

2 1/2

TYPE S.R.

2 1/2 2

2 1 1/2

1 1/2

1

1

1/2

1/2 0 LBS.

0 LBS.

HOT

IN.

IN.

C

FIGURE 920 - TYPE G HANGER SIZE

000 000 00 00 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A

CASE LENGTH B

CASE DIAMETER C

E

1⁄ 2

8 203 91 ⁄ 4 2350 97 ⁄ 8 251 97 ⁄ 8 251 97 ⁄ 8 251 10 254 10 254 10 254 113⁄4 298 113⁄4 298 113⁄4 298 121⁄2 318 133⁄4 349 121⁄2 318 13 330 155⁄8 397 161⁄2 419 161⁄2 419 19 483 211⁄4 540 203⁄4 527 231⁄2 597 291⁄4 743 323⁄8 822 385⁄8 981

4 102 4 102 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 85⁄8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

15⁄ 8 41 13⁄8 35 13⁄8 35 13⁄8 35 13⁄8 35 17⁄8 48 17⁄8 48 17⁄8 48 113⁄16 46 113⁄16 46 113⁄16 46 27⁄8 73 27⁄8 73 27⁄8 73 37⁄8 98 37⁄8 98 313⁄16 97 313⁄16 97 37⁄8 98 35⁄8 92 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 41⁄4 108

M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 1 1⁄ 4 M30 1 1⁄ 4 M30 1 1⁄ 2 M36 1 3⁄ 4 M42 2 M48 2 1⁄ 4 M56 2 1⁄ 2 M64 2 3⁄ 4 M72 3 M80x6

MIN. THD. ENGM'T F 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄8 29 11⁄8 29 11⁄8 29 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 13⁄4 44 13⁄4 44 2 51 25⁄8 67 27⁄8 73 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

Ordering: Specify Figure Number (Travel Series), Type, Size, Total Load, Hot Load per spring, Cold Load per spring, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Center to Center of Rods dimension and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920 Note: Please see page 45 to calculate Rod Take-Out.

For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920.

CHANNEL SIZE

MAX. C-C

C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C15 x 33.9 C380 x 50 C15 x 33.9 C380 x 50

24 610 24 610 24 610 24 610 24 610 30 762 30 762 30 762 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 33 838 36 914 36 914 36 914 42 1067 42 1067 40 1016 48 1219 48 1219

CHANNEL SPACING W 5⁄ 8

16 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 11⁄2 38 21⁄8 54 21⁄8 54 21⁄8 54 23⁄8 67 25⁄8 67 25⁄8 67 31⁄8 79 33⁄8 86

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

P

APPROX. WEIGHT EACH

11⁄2 38 11⁄2 38 11⁄2 38 11⁄2 38 11⁄2 38 2 51 2 51 2 51 2 51 2 51 2 51 3 76 3 76 3 76 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102

24 11 26 12 30 14 30 14 33 15 41 19 46 21 51 23 63 29 62 28 71 32 113 51 123 56 143 65 161 73 182 83 191 87 260 118 327 148 437 198 691 313 778 353 1081 490 1216 552 1632 740

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 23


VARIABLE SPRING SUPPORTS SERIES 940 - TYPE A

G

A

B

E

F

C

SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LGTH B 141⁄4 362 16 406 171⁄2 445 151⁄2 394 17 432 18 457 183⁄8 467 20 508 21 533 21 533 241⁄4 616 191⁄2 495 211⁄2 546 27 686 273⁄4 705 273⁄8 695 325⁄8 829 37 940 361⁄2 927 421⁄8 1070 491⁄2 1257 545⁄8 1387 67 1702

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 141⁄8 359 15 7⁄8 403 173⁄8 441 153⁄8 391 16 7⁄8 429 17 7⁄8 454 181⁄4 464 20 508 211⁄8 537 207⁄8 530 241⁄8 613 193⁄8 492 213⁄8 543 267⁄8 683 271⁄2 699 271⁄4 692 321⁄2 826 365⁄8 930 363⁄8 924 42 1067 493⁄8 1254 541⁄2 1384 671⁄4 1708

MIN. THD. ROD APPROX. ENGM'T ENGM'T WGT F G EACH 7⁄ 8 7⁄ 8 16 22 22 7.3 7⁄ 8 7⁄ 8 17 22 22 7.7 7⁄ 8 7⁄ 8 19 22 22 8.6 7⁄ 8 7⁄ 8 26 22 22 12 7⁄ 8 7⁄ 8 31 22 22 14 7⁄ 8 7⁄ 8 34 22 22 15 11⁄8 11 ⁄ 8 45 29 29 20 11⁄8 11 ⁄ 8 44 29 29 20 11⁄8 11 ⁄ 8 53 29 29 24 11⁄4 11 ⁄ 4 87 32 32 39 11⁄4 11 ⁄ 4 97 32 32 44 11⁄4 11 ⁄ 4 115 32 32 52 15⁄8 15 ⁄ 8 129 41 41 59 15⁄8 15 ⁄ 8 146 41 41 66 13⁄4 13 ⁄ 4 156 44 44 71 13⁄4 13 ⁄ 4 212 44 44 96 2 2 280 51 51 127 25⁄8 25 ⁄ 8 374 67 67 170 27⁄8 27 ⁄ 8 570 73 73 259 31⁄2 31 ⁄ 2 661 89 89 300 37⁄8 37 ⁄ 8 943 98 98 428 41⁄4 41 ⁄ 4 1036 108 108 470 41⁄4 41 ⁄ 4 1423 108 108 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940 For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 24

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS FIGURE 940 TYPE B

A

T R H

A

E

B

A

F C

A-A

LUG HOLE DIAMETER

ROD CASE CASE SIZE LGTH. DIA. SIZE A B C 1⁄ 2 0 141⁄4 4 0 M12 362 102 1⁄ 2 1 16 4 1 M12 406 102 1⁄ 2 2 171⁄2 4 2 M12 445 102 1⁄ 2 3 151⁄2 59⁄16 3 M12 394 141 1⁄ 2 4 17 59⁄16 4 M12 432 141 1⁄ 2 5 18 59⁄16 5 M12 457 141 5⁄ 8 6 183⁄8 65 ⁄ 8 6 M16 467 168 5⁄ 8 7 20 65⁄8 7 M16 508 168 5⁄ 8 8 211⁄4 65 ⁄ 8 8 M16 540 168 3⁄ 4 9 21 85⁄8 9 M20 533 219 3⁄ 4 10 241⁄4 85 ⁄ 8 10 M20 616 219 3⁄ 4 11 191⁄2 85 ⁄ 8 11 M20 495 219 12 1 211⁄2 85 ⁄ 8 12 M24 546 219 13 1 27 85⁄ 8 13 M24 686 219 14 1 1⁄ 4 273⁄4 85 ⁄ 8 14 M30 705 219 15 1 1⁄ 4 273⁄8 85 ⁄ 8 15 M30 695 219 16 1 1⁄ 2 325⁄8 85 ⁄ 8 16 M36 829 219 17 1 3⁄ 4 37 85⁄8 17 M42 940 219 18 2 361⁄2 123⁄4 18 M48 927 324 19 2 1⁄ 4 421⁄8 123⁄4 19 M56 1070 324 20 2 1⁄ 2 491⁄2 123⁄4 20 M64 1257 324 21 2 3⁄ 4 545⁄8 123⁄4 21 M72 1387 324 22 3 67 123⁄4 22 M80x6 1702 324

E 155⁄8 397 173⁄8 441 187⁄8 479 167⁄8 429 183⁄8 467 193⁄8 492 193⁄4 502 211⁄2 546 221⁄2 572 223⁄8 568 255⁄8 651 207⁄8 530 233⁄8 594 287⁄8 733 301⁄2 775 301⁄4 768 351⁄2 902 395⁄8 1006 403⁄8 1026 46 1168 537⁄8 1368 59 1499 721⁄4 1835

MIN. HGT. THD. OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 8 11⁄2 29 38 11 ⁄ 4 11⁄2 32 38 11 ⁄ 4 11⁄2 32 38 11 ⁄ 4 11⁄2 32 38 15 ⁄ 8 2 41 51 15 ⁄ 8 2 41 51 13 ⁄ 4 3 44 76 13 ⁄ 4 3 44 76 2 3 51 76 25 ⁄ 8 3 67 76 27 ⁄ 8 4 73 102 31⁄2 41⁄2 89 114 37 ⁄ 8 41⁄2 98 114 41⁄4 41⁄2 108 114 41 ⁄ 4 5 108 127

R 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 2 51 2 51 2 1⁄ 2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT. DIA. EACH 11⁄ 16 16. 17 7.3 11⁄ 16 17 17 7.7 11⁄ 16 19 17 8.6 11⁄ 16 26 17 12 11⁄ 16 31 17 14 11⁄ 16 34 17 15 13⁄ 16 45 21 20 13⁄ 16 44 21 20 13⁄ 16 53 21 24 15⁄ 16 87 24 39 15⁄ 16 97 24 44 15⁄ 16 115 24 52 11⁄4 129 32 59 11⁄4 146 32 66 11⁄2 156 38 71 11⁄2 212 38 96 13⁄4 280 44 127 2 374 51 170 23⁄8 570 60 259 25⁄8 661 67 300 2 7⁄ 8 943 73 428 3 1⁄ 8 1036 79 470 33⁄ 8 1423 86 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 25


VARIABLE SPRING SUPPORTS SERIES 940 - TYPE C S

A T

R H

A

E

B

A

F C

A-A

LUG HOLE DIAMETER

ROD SIZE SIZE A 1⁄ 2 0 0 M12 1⁄ 2 1 1 M12 1⁄ 2 2 2 M12 1⁄ 2 3 3 M12 1⁄ 2 4 4 M12 1⁄ 2 5 5 M12 5⁄ 8 6 6 M16 5⁄ 8 7 7 M16 5⁄ 8 8 8 M16 3⁄ 4 9 9 M20 3⁄ 4 10 10 M20 3⁄ 4 11 11 M20 12 1 12 M24 13 1 13 M24 14 11⁄4 14 M30 15 11⁄4 15 M30 16 11⁄2 16 M36 17 13⁄4 17 M42 18 2 18 M48 19 21⁄4 19 M56 20 21⁄2 20 M64 21 23⁄4 21 M72 22 3 22 M80x6

CASE LGTH. B 141⁄4 362 16 406 171⁄2 445 151⁄2 394 17 432 18 457 183⁄8 467 20 508 21 533 21 533 241⁄4 616 191⁄2 495 211⁄2 546 27 686 273⁄4 705 273⁄8 695 325⁄8 829 37 940 361⁄2 927 421⁄8 1070 491⁄2 1257 545⁄8 1387 67 1702

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 155⁄8 397 173⁄8 441 187⁄8 479 167⁄8 429 183⁄8 467 193⁄8 492 193⁄4 502 211⁄2 546 211⁄2 572 223⁄8 568 255⁄8 651 207⁄8 530 233⁄8 594 287⁄8 733 301⁄2 775 301⁄4 768 351⁄2 902 395⁄8 1006 403⁄8 1026 46 1168 537⁄8 1368 59 1499 721⁄4 1835

MIN. HGT. THD. OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 15⁄8 2 41 51 15⁄8 2 41 51 13⁄4 3 44 76 13⁄4 3 44 76 2 3 51 76 25⁄8 3 67 76 27⁄8 4 73 102 3 1⁄ 2 41⁄2 89 114 37⁄8 41⁄2 98 114 4 1⁄ 4 41⁄2 108 114 41⁄4 5 108 127

R 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 2 38 11 ⁄ 2 38 2 51 2 51 21 ⁄ 2 64 21 ⁄ 2 64 3 76 3 76 4 102 4 102 4 102

S 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 2 51 2 51 23⁄8 60 23⁄8 60 2 7⁄ 8 73 31 ⁄ 8 79 33 ⁄ 8 86 35 ⁄ 8 92 3 7⁄ 8 98

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT DIA. EACH 11⁄ 16 16 17 7.3 11⁄ 16 17 17 7.7 11⁄ 16 19 17 8.6 11⁄ 16 26 17 12 11⁄ 16 31 17 14 11⁄ 16 34 17 15 13⁄ 16 45 21 20 13⁄ 16 44 21 20 13⁄ 16 53 21 24 15⁄ 16 87 24 39 15⁄ 16 97 24 44 15⁄ 16 115 24 52 11 ⁄ 4 129 32 59 11 ⁄ 4 146 32 66 11 ⁄ 2 156 38 710 11 ⁄ 2 212 38 96 13 ⁄ 4 280 44 127 2 374 51 170 23 ⁄ 8 570 60 259 25 ⁄ 8 661 67 300 27⁄8 943 73 428 31⁄8 1036 79 470 33⁄8 1423 86 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 26

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 940 TYPE D A ROD, NUTS, AND WASHER NOT FURNISHED

M

E B

C

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LENGTH B 141⁄4 362 16 406 171⁄2 445 151⁄2 394 17 432 18 457 183⁄8 467 20 508 21 533 21 533 241⁄4 616 191⁄2 495 211⁄2 546 27 686 273⁄4 705 273⁄8 695 325⁄8 829 37 940 361⁄2 927 421⁄8 1070 491⁄2 1257 545⁄8 1387 67 1702

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65 ⁄ 8 168 65⁄8 168 65⁄8 168 85⁄8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85⁄8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

HGT. OF ROD APPROX. SPACER TAKEOUT WEIGHT E M EACH 221⁄2 71 ⁄ 2 15 572 191 6.8 241⁄4 71 ⁄ 2 15 616 191 6.8 253⁄4 71 ⁄ 2 18 654 191 8.2 233⁄4 71 ⁄ 2 24 635 191 11 251⁄4 71 ⁄ 2 29 641 191 13 261⁄4 71 ⁄ 2 32 667 191 15 263⁄4 71 ⁄ 2 43 679 191 20 281⁄4 71 ⁄ 2 42 718 191 19 297⁄8 77 ⁄ 8 51 759 200 23 30 77⁄8 84 762 200 38 331⁄4 77 ⁄ 8 94 845 200 43 281⁄2 77 ⁄ 8 96 724 200 44 311⁄8 81 ⁄ 8 103 791 206 47 365⁄8 81 ⁄ 8 139 930 206 63 381⁄8 81 ⁄ 2 149 968 216 68 375⁄8 83 ⁄ 8 200 956 213 91 435⁄8 83 ⁄ 4 261 1108 222 118 487⁄8 91 ⁄ 4 343 1241 235 156 451⁄4 53 ⁄ 4 533 1149 146 242 511⁄2 6 615 1308 152 279 591⁄4 6 850 1505 152 386 65 61⁄4 937 1651 159 425 761⁄2 5 1277 1943 127 579

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940 For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 27


VARIABLE SPRING SUPPORTS SERIES 940 TYPE E

C MUST BE TACK WELDED BY CUSTOMER

R.H. AND L.H. ROD AND NUT NOT FURNISHED, LENGTH TO SUIT CUSTOMER REQUIREMENT

B

F L.H. THD.

6"

MUST BE TACK WELDED BY CUSTOMER

A

F TURNBUCKLE IS FURNISHED

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄ 4 M30 11⁄ 4 M30 11⁄ 2 M36 13⁄ 4 M42 2 M48 21⁄ 4 M56 21⁄ 2 M64 23⁄ 4 M72 3 M80X6

CASE LENGTH B 141⁄4 362 16 406 171⁄2 445 151⁄2 394 17 432 18 457 183⁄8 467 20 508 21 533 21 533 241⁄4 616 191⁄2 495 211⁄2 546 27 686 273⁄4 705 273⁄8 695 325⁄8 829 37 940 361⁄2 927 421⁄8 1070 491⁄2 1257 545⁄8 1387 67 1702

CASE MIN. THD. DIAMETER ENGM'T C F 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 65 ⁄ 8 11⁄8 168 29 65⁄8 11⁄8 168 29 65⁄8 11⁄8 168 29 85⁄8 11⁄4 219 32 85 ⁄ 8 11⁄4 219 32 85 ⁄ 8 11⁄4 219 32 85 ⁄ 8 15⁄8 219 41 85⁄8 15⁄8 219 41 85 ⁄ 8 13⁄4 219 44 85 ⁄ 8 13⁄4 219 44 85 ⁄ 8 2 219 51 5 8 ⁄8 25⁄8 219 67 123⁄4 27⁄8 324 73 123⁄4 31⁄2 324 89 123⁄4 37⁄8 324 98 123⁄4 41⁄4 324 108 123⁄4 41⁄4 324 108

APPROX. WEIGHT EACH 15 6.8 15 6.8 18 8.2 24 11 29 13 32 15 43 20 42 19 51 23 84 38 94 43 96 44 103 47 139 63 149 68 200 91 261 118 343 156 533 242 615 279 850 386 937 425 1277 579

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940 For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 28

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 940 - TYPE F CASE CASE BOTTOM LNGTH. DIA. FLANGE SIZE B C BOLT DIA. IN.

LBS.

0 1/2 1 1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5

LBS./IN.

S.R. TYPE HOT

SIZE COLD

MK.# SERIAL NUMBER

FIGURE NO. 940

X

B

BO

LT

C

IR

C

LE

C

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

123⁄4 324 141⁄2 368 16 406 141⁄8 359 151⁄2 394 167⁄8 429 165⁄8 422 181⁄2 470 191⁄2 495 195⁄8 498 221⁄8 562 173⁄4 451 19 483 241⁄8 613 243⁄8 619 241⁄2 622 291⁄8 740 331⁄4 845 321⁄8 816 365⁄8 930 431⁄8 1095 481⁄2 1232 597⁄8 1521

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19

BOTTOM FLANGE

x 71⁄2 x 71⁄2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 1⁄ 4

BOLT OVERALL LOAD LOAD APPROX. CIRCLE LNGTH. X ** FLANGE FLANGE WGT. MIN. MAX. MIN. MAX. DIA. THICK. EACH

7 178 7 178 7 178 73⁄4 197 73⁄4 197 73⁄4 197 91⁄4 235 91⁄4 235 91⁄4 235 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400

93⁄4 141⁄4 248 362 93⁄4 16 248 406 93⁄4 171⁄2 248 445 93⁄4 155⁄8 248 397 93⁄4 167⁄8 248 429 93⁄4 181⁄4 248 464 101⁄2 183⁄8 267 467 101⁄2 203⁄8 267 518 101⁄2 211⁄4 267 540 161⁄4 213⁄4 413 552 161⁄4 241⁄4 413 616 161⁄4 197⁄8 413 505 161⁄4 211⁄8 413 537 161⁄4 261⁄4 413 667 161⁄4 261⁄2 413 673 161⁄4 265⁄8 413 676 161⁄4 311⁄4 413 794 161⁄4 353⁄8 413 899 21 341⁄8 533 867 21 385⁄8 533 981 21 46 533 1168 21 505⁄8 533 1286 21 623⁄4 533 1594

161⁄4 413 18 457 191⁄2 495 175⁄8 448 18 457 203⁄8 518 203⁄8 518 221⁄4 565 231⁄4 591 235⁄8 600 261⁄8 664 213⁄4 552 23 584 281⁄8 714 283⁄8 721 281⁄2 724 331⁄8 841 371⁄4 946 361⁄4 921 403⁄4 1035 48 1219 525⁄8 1337 643⁄4 1645

37⁄8 98 37⁄8 98 37⁄8 98 53⁄8 137 53⁄8 137 53⁄8 137 53⁄8 137 63⁄8 162 63⁄8 162 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318

1⁄ 4

6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13

23 10 23 10 26 12 38 17 43 20 46 21 62 28 61 28 70 32 120 54 131 59 142 64 156 71 166 75 175 79 224 102 281 127 378 171 562 255 617 280 855 388 910 413 1231 558

** The Installed Height should be the mid-point between the Maximum and Minimum Overall Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Installed Height, and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940 For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 29


VARIABLE SPRING SUPPORTS A

F

C-C Rod Dimension as specified by customer

E

P W

FIGURE NO. 940

B

FIGURE NO. 940

NUMBER SERIAL

NUMBER SERIAL

MK.#

COLD

MK.#

COLD

HOT TYPE

SIZE

SIZE

S.R.

LBS./IN.

5

TYPE S.R.

5 4 1/2

4 1/2 4

4

3 1/2

3 1/2 3

3 2 1/2

2 1/2 2

2

1 1/2

1 1/2 1

1 1/2

1/2

0

0 LBS.

HOT

LBS./IN.

IN.

IN.

LBS.

C

Ordering: Specify Figure Number (Travel Series), Type, Size, Total Load, Hot Load per spring, Cold Load per spring, Movement and Direction of Movement (from the Cold/ Installed position to the Hot/Operating position), Center to Center of Rods dimension and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940 For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940. Note: Please see page 45 to calculate Rod Take-Out.

FIGURE 940 TYPE G HANGER SIZE

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A

CASE LENGTH B

CASE DIAMETER C

E

1⁄ 2

141⁄4 362 16 406 171⁄2 445 151⁄2 394 17 432 18 457 183⁄8 467 20 508 21 533 21 533 241⁄4 616 191⁄2 495 211⁄2 546 27 686 273⁄4 705 273⁄8 6952 325⁄8 829 37 940 361⁄2 927 421⁄8 1070 491⁄2 1257 545⁄8 1387 67 1702

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 6 5⁄ 8 168 6 5⁄ 8 168 8 5⁄ 8 219 85⁄8 219 85⁄8 219 85⁄8 219 8 5⁄ 8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

13⁄8 35 13⁄ 8 35 13⁄8 35 17 ⁄ 8 48 17 ⁄ 8 48 17 ⁄ 8 48 17 ⁄ 8 48 17 ⁄ 8 48 17 ⁄ 8 48 27 ⁄ 8 73 27 ⁄ 8 73 27 ⁄ 8 73 37 ⁄ 8 98 37 ⁄ 8 98 37 ⁄ 8 98 37 ⁄ 8 98 37 ⁄ 8 98 35 ⁄ 8 92 37 ⁄ 8 98 37 ⁄ 8 98 37 ⁄ 8 98 37 ⁄ 8 98 41 ⁄ 4 108

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 1 1⁄ 4 M30 1 1⁄ 4 M30 1 1⁄ 2 M36 1 3⁄ 4 M42 2 M48 2 1⁄ 4 M56 2 1⁄ 2 M64 2 3⁄ 4 M72 3 M80x6

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 30

MIN. THD. ENGM'T F 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄8 29 11⁄8 29 11⁄8 29 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 13⁄4 44 13⁄4 44 2 51 25⁄8 67 27⁄8 73 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

CHANNEL SIZE

MAX. C-C

C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C15 x 33.9 C380 x 50 C15 x 33.9 C380 x 50

24 610 24 610 24 610 30 762 30 762 30 762 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 42 1067 42 1067 40 1016 48 1219 48 1219

CHANNEL SPACING W 5⁄ 8

16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 11⁄2 38 21⁄8 54 21⁄8 54 21⁄8 54 23⁄8 60 25⁄8 67 27⁄8 73 31⁄8 79 33⁄8 86

P

APPROX. WEIGHT EACH

11 ⁄ 2 38 11 ⁄ 2 38 11 ⁄ 2 38 2 51 2 51 2 51 2 51 2 51 2 51 3 76 3 76 3 76 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102

42 19 43 20 48 22 61 28 71 32 77 35 100 45 98 44 116 53 184 83 204 93 241 109 272 123 304 138 324 147 445 202 573 260 762 346 1155 524 1336 606 1874 850 2086 946 2856 1295


VARIABLE SPRING SUPPORTS SERIES 960 - TYPE A

G

A

0

1 1/2

3

4 1/2

6

7 1/2 DEFL IN

LD LBS

FIG. NO.

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

B

E

F

SIZE

C

SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LNGTH B 201⁄2 521 231⁄8 587 253⁄8 645 225⁄8 575 251⁄2 648 26 660 26 660 29 737 301⁄2 775 287⁄8 733 341⁄2 876 28 711 301⁄2 775 381⁄8 968 383⁄4 984 381⁄2 978 463⁄8 1178 503⁄4 1289 51 1295 583⁄4 1492 693⁄4 1772 771⁄2 1969 947⁄8 2410

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 203⁄8 518 23 584 251⁄4 641 221⁄2 572 253⁄8 645 257⁄8 657 253⁄4 654 283⁄4 730 301⁄4 768 283⁄4 730 343⁄8 873 277⁄8 708 303⁄8 772 38 965 381⁄2 978 381⁄4 972 461⁄4 1175 503⁄8 1280 507⁄8 1292 587⁄8 1495 695⁄8 1768 773⁄8 1965 951⁄8 2416

MIN. THD. ROD APPRX. ENGM'T ENGM'T WGT. F G EACH 7⁄ 8 7⁄ 8 22 22 22 10 7⁄ 8 7⁄ 8 23 22 22 10 7⁄ 8 7⁄ 8 26 22 22 12 7⁄ 8 7⁄ 8 35 22 22 16 7⁄ 8 7⁄ 8 43 22 22 20 7⁄ 8 7⁄ 8 48 22 22 22 11⁄8 11 ⁄ 8 63 29 29 29 11⁄8 11 ⁄ 8 64 29 29 29 11⁄8 11 ⁄ 8 75 29 29 34 11⁄4 11 ⁄ 4 123 32 32 56 11⁄4 11 ⁄ 4 139 32 32 63 11⁄4 11 ⁄ 4 163 32 32 74 15⁄8 15 ⁄ 8 185 41 41 84 15⁄8 15 ⁄ 8 210 41 41 95 13⁄4 15 ⁄ 8 224 44 41 102 13⁄4 2 300 44 51 136 2 2 403 51 51 183 25⁄8 25 ⁄ 8 535 67 67 243 27⁄8 27 ⁄ 8 783 73 73 355 31⁄2 31 ⁄ 2 929 89 89 421 37⁄8 37 ⁄ 8 1342 98 98 609 41⁄4 41⁄4 1842 108 108 836 41⁄4 41 ⁄ 4 2350 108 108 1066

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960 For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 31


VARIABLE SPRING SUPPORTS FIGURE 960 TYPE B

A

T R H

A 0

1 1/2

3

4 1/2

6

7 1/2 DEFL IN

LD LBS

FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E

B

F

A C

A-A

32

LOADS POUNDS NEWTONS

R 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 1 1⁄ 2 38 11⁄2 38 2 51 2 51 2 1⁄ 2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

T 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 3⁄ 8

10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT. DIA. EACH 11⁄ 16 22 17 10 11⁄ 16 23 17 10 11⁄ 16 26 17 12 11⁄ 16 35 17 16 11⁄ 16 43 17 20 11⁄ 16 48 17 22 13⁄ 16 64 21 29 13⁄ 16 63 21 29 13⁄ 16 75 21 34 15⁄ 16 123 24 56 15⁄ 16 139 24 63 15⁄ 16 163 24 74 11⁄4 185 32 84 11⁄4 210 32 95 11⁄2 224 38 102 11⁄2 300 38 136 13⁄4 403 44 183 2 535 51 243 23⁄8 783 60 355 25⁄8 929 67 421 2 7⁄ 8 1342 73 609 3 1⁄ 8 1475 79 669 33⁄ 8 2025 86 919

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

LUG HOLE DIAMETER

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

MIN. HGT. ROD CASE CASE THD. OF SIZE LGTH. DIA. ENGM'T PIN SIZE A B C E F H 7⁄ 8 1⁄ 2 0 201⁄2 4 217⁄8 11⁄2 0 M12 521 102 556 22 38 7⁄ 8 1⁄ 2 1 231⁄8 4 241⁄2 11⁄2 1 M12 587 102 622 22 38 7⁄ 8 1⁄ 2 2 253⁄8 4 263⁄4 11⁄2 2 M12 645 102 679 22 38 1⁄ 2 7⁄ 8 3 225⁄8 59⁄16 24 11⁄2 3 M12 575 141 610 22 38 7⁄ 8 1⁄ 2 4 251⁄2 59⁄16 267⁄8 11⁄2 4 M12 648 141 683 22 38 7⁄ 8 1⁄ 2 5 26 59⁄16 273⁄8 11⁄2 5 M12 660 141 695 22 38 5⁄ 8 6 26 65⁄8 271⁄4 11⁄8 11⁄2 6 M16 660 168 692 29 38 5⁄ 8 7 29 65⁄8 301⁄4 11⁄8 11⁄2 7 M16 737 168 768 29 38 5⁄ 8 8 301⁄2 65 ⁄ 8 313⁄4 11⁄8 11⁄2 8 M16 775 168 806 29 38 3⁄ 4 9 287⁄8 85 ⁄ 8 301⁄4 11⁄4 11⁄2 9 M20 733 219 768 32 38 3⁄ 4 10 341⁄2 85 ⁄ 8 357⁄8 11⁄4 11⁄2 10 M20 876 219 911 32 38 3⁄ 4 11 28 85⁄8 293⁄8 11⁄4 11⁄2 11 M20 711 219 746 32 38 12 1 301⁄2 85 ⁄ 8 323⁄8 15⁄8 2 12 M24 775 219 822 41 51 13 1 381⁄8 85 ⁄ 8 40 15⁄8 2 13 M24 968 219 1016 41 51 14 1 1⁄ 4 383⁄4 85 ⁄ 8 411⁄2 13⁄4 3 14 M30 984 219 1054 44 76 15 1 1⁄ 4 381⁄2 85 ⁄ 8 411⁄4 13⁄4 3 15 M30 978 219 1048 44 76 16 1 1⁄ 2 463⁄8 85 ⁄ 8 491⁄4 2 3 16 M36 1178 219 1251 51 76 17 1 3⁄ 4 503⁄4 85 ⁄ 8 533⁄8 25⁄8 3 17 M42 1289 219 1356 67 76 18 2 51 123⁄4 547⁄8 27⁄8 4 18 M48 1295 324 1394 73 102 19 2 1⁄ 4 583⁄4 123⁄4 633⁄8 31⁄2 41⁄2 19 M56 1492 324 1610 89 114 20 2 1⁄ 2 693⁄4 123⁄4 741⁄8 37⁄8 41⁄2 20 M64 1772 324 1883 98 114 21 2 3⁄ 4 771⁄2 123⁄4 817⁄8 41⁄4 41⁄2 21 M72 1969 324 2080 108 114 22 3 947⁄8 123⁄4 1001⁄8 41 ⁄ 4 5 22 M80x6 2410 324 2543 108 127

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 960 - TYPE C S

A T

R H

A 0

1 1/2

3

4 1/2

6

7 1/2 DEFL IN

LD LBS

FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E

B

A

F C

A-A

LUG HOLE DIAMETER

ROD SIZE SIZE A 1⁄ 2 0 0 M12 1⁄ 2 1 1 M12 1⁄ 2 2 2 M12 1⁄ 2 3 3 M12 1⁄ 2 4 4 M12 1⁄ 2 5 5 M12 5⁄ 8 6 6 M16 5⁄ 8 7 7 M16 5⁄ 8 8 8 M16 3⁄ 4 9 9 M20 3⁄ 4 10 10 M20 3⁄ 4 11 11 M20 12 1 12 M24 13 1 13 M24 14 11⁄4 14 M30 15 11⁄4 15 M30 16 11⁄2 16 M36 17 13⁄4 17 M42 18 2 18 M48 19 21⁄4 19 M56 20 21⁄2 20 M64 21 23⁄4 21 M72 22 3 22 M80x6

CASE LGTH. B 201⁄2 521 231⁄8 587 253⁄8 645 225⁄8 575 251⁄2 648 26 660 26 660 29 737 301⁄2 775 287⁄8 733 341⁄2 876 28 711 301⁄2 775 381⁄8 968 383⁄4 984 381⁄2 978 463⁄8 1178 503⁄4 1289 51 1295 583⁄4 1492 693⁄4 1772 771⁄2 1969 947⁄8 2410

MIN. HGT. CASE THD. OF DIA. ENGM'T PIN C E F H 7⁄ 8 4 217⁄8 11⁄2 102 556 22 38 7⁄ 8 4 241⁄2 11⁄2 102 622 22 38 7⁄ 8 4 263⁄4 11⁄2 102 679 22 38 7⁄ 8 59⁄16 24 11⁄2 141 610 22 38 7⁄ 8 59⁄16 267⁄8 11⁄2 141 683 22 38 7⁄ 8 59⁄16 273⁄8 11⁄2 141 695 22 38 65⁄8 271⁄4 11⁄8 11⁄2 168 692 29 38 65⁄8 301⁄4 11⁄8 11⁄2 168 768 29 38 65⁄8 313⁄4 11⁄8 11⁄2 168 806 29 38 85⁄8 301⁄4 11⁄4 11⁄2 219 768 32 38 85⁄8 357⁄8 11⁄4 11⁄2 219 911 32 38 85⁄8 293⁄8 11⁄4 11⁄2 219 746 32 38 8 5⁄ 8 323⁄8 15⁄8 2 219 822 41 51 85⁄8 40 1 5⁄ 8 2 219 1016 41 51 85⁄8 411⁄2 13⁄4 3 219 1054 44 76 85⁄8 411⁄4 13⁄4 3 219 1048 44 76 85⁄8 491⁄4 2 3 219 1251 51 76 85⁄8 533⁄8 25⁄8 3 219 1356 67 76 123⁄4 547⁄8 27⁄8 4 324 1394 73 102 123⁄4 633⁄8 31⁄2 41⁄2 324 1610 89 114 123⁄4 741⁄8 37⁄8 41⁄2 324 1883 98 114 123⁄4 817⁄8 41⁄4 41⁄2 324 2080 108 114 123⁄4 1001⁄8 41⁄4 5 324 2543 108 127

R 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11⁄2 38 11⁄2 38 2 51 2 51 21⁄2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

S

T

7⁄ 8

1⁄ 4

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄16 27 11⁄16 27 11⁄16 27 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 2 51 2 51 23 ⁄ 8 60 23 ⁄ 8 60 2 3⁄ 8 60 23 ⁄ 8 60 33 ⁄ 8 86 33 ⁄ 8 86 3 7⁄ 8 98

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 3⁄ 8

10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT DIA. EACH 11⁄ 16 22 17 10 11⁄ 16 23 17 10 11⁄ 16 26 17 12 11⁄ 16 35 17 16 11⁄ 16 43 17 20 11⁄ 16 48 17 22 13⁄ 16 64 21 29 13⁄ 16 63 21 29 13⁄ 16 75 21 34 15⁄ 16 123 24 56 15⁄ 16 139 24 63 15⁄ 16 163 24 74 11⁄4 185 32 84 11⁄4 210 32 95 11⁄2 224 38 102 11⁄2 300 38 136 13⁄4 403 44 183 2 535 51 243 23⁄8 783 60 355 25⁄8 929 67 421 27⁄8 1342 73 609 31⁄8 1475 79 669 33⁄8 2025 86 919

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 33


VARIABLE SPRING SUPPORTS SERIES 960 TYPE D A ROD, NUTS, AND WASHER NOT FURNISHED M

0

1 1/2

3

4 1/2

6

7 1/2 LD LBS

DEFL IN

FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E B

C

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LENGTH B 201⁄2 521 231⁄8 587 253⁄8 645 225⁄8 575 251⁄2 648 26 660 26 660 29 737 301⁄2 775 287⁄8 733 341⁄2 876 28 711 301⁄2 775 301⁄8 765 383⁄4 984 381⁄2 978 463⁄8 1178 503⁄4 1289 51 1295 583⁄4 1492 693⁄4 1772 771⁄2 1969 947⁄8 2410

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 6 5⁄ 8 168 6 5⁄ 8 168 65 ⁄ 8 168 85 ⁄ 8 219 85 ⁄ 8 219 8 5⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 293⁄4 756 323⁄8 822 345⁄8 879 317⁄8 810 343⁄4 883 351⁄4 895 351⁄2 902 381⁄2 978 40 1016 385⁄8 981 441⁄4 1124 373⁄4 959 41 1041 401⁄4 1022 497⁄8 1267 491⁄2 1257 581⁄4 1480 621⁄8 1578 64 1626 723⁄8 1838 84 2134 923⁄8 2346 1103⁄8 2805

HGT. OF APPROX. SPACER WEIGHT M EACH 81⁄2 21 216 9.5 81⁄2 22 216 10 81⁄2 25 216 11 81⁄2 34 216 15 81⁄2 42 216 19 81⁄2 46 216 21 81⁄2 60 216 27 81⁄2 62 216 28 81 ⁄ 2 73 216 33 85⁄8 119 219 54 85⁄8 135 219 61 85⁄8 157 219 71 9 178 229 81 9 198 229 90 91⁄4 212 235 96 91⁄8 285 232 129 95⁄8 375 244 170 93⁄4 491 248 223 10 732 254 332 101⁄4 863 260 391 101⁄2 1225 267 556 103⁄4 1662 273 754 11 2232 279 1012

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960 For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 34

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 960 TYPE E

MUST BE TACK WELDED BY CUSTOMER

C

R.H. AND L.H. ROD AND NUT NOT FURNISHED, LENGTH TO SUIT CUSTOMER REQUIREMENT

0

1 1/2

3

4 1/2

6

7 1/2 LD LBS

DEFL IN

FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

B

F

L.H. THD.

12" MUST BE TACK WELDED BY CUSTOMER

A

F TURNBUCKLE IS FURNISHED

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄ 4 M30 11⁄ 4 M30 11⁄ 2 M36 13⁄ 4 M42 2 M48 21⁄ 4 M56 21⁄ 2 M64 23⁄ 4 M72 3 M80X6

CASE LENGTH B 201⁄2 521 231⁄8 587 253⁄8 645 225⁄8 575 251⁄2 648 26 660 26 660 29 737 301⁄2 775 287⁄8 733 341⁄2 876 28 711 301⁄2 775 381⁄8 968 383⁄4 984 381⁄2 978 463⁄8 1178 503⁄4 1289 51 1295 583⁄4 1492 693⁄4 1772 771⁄2 1969 947⁄8 2410

CASE MIN. THD. DIAMETER ENGM'T C F 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 65⁄8 11 ⁄ 8 168 29 65⁄8 11 ⁄ 8 168 29 65 ⁄ 8 11 ⁄ 8 168 29 85 ⁄ 8 11 ⁄ 4 219 32 85 ⁄ 8 11 ⁄ 4 219 32 85⁄8 11 ⁄ 4 219 32 85 ⁄ 8 15 ⁄ 8 219 41 85 ⁄ 8 15 ⁄ 8 219 41 85 ⁄ 8 13 ⁄ 4 219 44 85 ⁄ 8 13 ⁄ 4 219 44 85 ⁄ 8 2 219 51 5 8 ⁄8 25 ⁄ 8 219 67 123⁄4 27 ⁄ 8 324 73 123⁄4 31 ⁄ 2 324 89 123⁄4 37 ⁄ 8 324 98 123⁄4 41 ⁄ 4 324 108 123⁄4 41 ⁄ 4 324 108

APPROX. WEIGHT EACH 21 9.5 22 10 25 11 34 15 42 19 46 21 60 27 62 28 73 33 119 54 135 61 157 71 178 81 198 90 212 96 285 129 375 170 491 223 732 332 863 391 1225 556 1662 754 2232 1012

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960 For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 35


VARIABLE SPRING SUPPORTS SERIES 960 - TYPE F CASE CASE BOTTOM LNGTH. DIA. FLANGE SIZE B C BOLT DIA. 0

1 1/2

3

4 1/2

6

7 1/2 DEFL IN

LD LBS

FIG. NO.

SIZE

CALIBRATED LOAD

MARK NUMBER

TYPE

TRAVEL

SERIAL NUMBER

X

B

BO

LT

C

IR

C

LE

C

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

183⁄4 476 213⁄8 543 235⁄8 600 21 533 227⁄8 581 243⁄4 629 241⁄2 622 253⁄8 645 283⁄4 730 267⁄8 683 321⁄2 826 257⁄8 657 271⁄2 699 351⁄2 902 357⁄8 911 357⁄8 911 423⁄4 1086 49 1245 467⁄8 1191 535⁄8 1362 633⁄8 1610 701⁄4 1784 881⁄2 2248

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19

BOTTOM FLANGE

x 71⁄2 x 71⁄2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 1⁄ 4

BOLT OVERALL LOAD LOAD APPROX. CIRCLE LNGTH. X ** FLANGE FLANGE WGT. MIN. MAX. MIN. MAX. DIA. THICK. EACH

7 178 7 178 7 178 73⁄4 197 73⁄4 197 73⁄4 197 91⁄4 235 91⁄4 235 91⁄4 235 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400

93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 101⁄2 267 101⁄2 267 101⁄2 267 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 21 533 21 533 21 533 21 533 21 533

201⁄4 514 227⁄8 581 251⁄8 638 221⁄2 572 243⁄8 619 263⁄8 670 261⁄4 667 291⁄8 740 301⁄2 775 287⁄8 733 341⁄2 876 277⁄8 708 281⁄2 724 371⁄2 953 377⁄8 962 377⁄8 959 443⁄4 1137 51 1295 49 1245 553⁄4 1416 661⁄4 1683 731⁄8 1857 913⁄8 2321

221⁄4 565 247⁄8 632 271⁄8 689 241⁄2 622 263⁄8 670 283⁄8 721 281⁄4 718 311⁄8 791 321⁄2 826 307⁄8 784 361⁄2 927 297⁄8 759 301⁄2 775 391⁄2 1003 397⁄8 1013 397⁄8 1013 463⁄4 1187 53 1346 51 1295 573⁄4 1467 681⁄4 1734 751⁄8 1908 933⁄8 2372

37⁄8 98 37⁄8 98 37⁄8 98 53⁄8 137 53⁄8 137 53⁄8 137 63⁄8 162 63⁄8 162 63⁄8 162 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 8 3⁄ 8 213 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318

1⁄ 4

6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13

31 14 31 14 35 16 51 23 59 27 64 29 92 42 90 41 104 47 171 78 188 85 207 94 229 104 246 112 261 118 335 152 428 194 542 246 805 365 826 375 1178 534 1425 646 1700 771

** The Installed Height should be the mid-point between the Maximum and Minimum Overall Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Installed Height, and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960 For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 36

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS F

A

C-C Rod Dimension as specified by customer

E

P

Ordering: Specify Figure Number (Travel Series), Type, Size, Total Load, Hot Load per spring, Cold Load per spring, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Center to Center of Rods dimension and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960 For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960. Note: Please see page 45 to calculate Rod Take-Out.

W

B FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

MARK NUMBER

DEFL IN

FIG. NO.

TRAVEL

SIZE

TYPE

CALIBRATED LOAD

SERIAL NUMBER

TRAVEL

SERIAL NUMBER

MARK NUMBER

LD LBS

LD LBS

DEFL IN

7 1/2

7 1/2

6

6

3

3

4 1/2

4 1/2

1 1/2

1 1/2

0

0

C

FIGURE 960 TYPE G HANGER SIZE

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A

CASE LENGTH B

CASE DIAMETER C

E

1⁄ 2

201⁄2 521 231⁄8 587 253⁄8 645 225⁄8 575 251⁄2 648 26 660 26 660 29 737 301⁄2 775 287⁄8 733 341⁄2 876 28 711 301⁄2 775 381⁄8 968 383⁄4 984 381⁄2 978 463⁄8 1178 503⁄4 1289 51 1295 583⁄4 1492 693⁄4 1772 771⁄2 1969 947⁄8 2410

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65 ⁄ 8 168 65 ⁄ 8 168 65⁄8 168 85⁄8 219 85⁄8 219 85 ⁄ 8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

13 ⁄ 8 35 13 ⁄ 8 35 13 ⁄ 8 35 17⁄8 48 17⁄8 48 17⁄8 48 27⁄8 73 27⁄8 73 27⁄8 73 27⁄8 73 27⁄8 73 27⁄8 73 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 1 1⁄ 4 M30 1 1⁄ 4 M30 1 1⁄ 2 M36 1 3⁄ 4 M42 2 M48 2 1⁄ 4 M56 2 1⁄ 2 M64 2 3⁄ 4 M72 3 M80x6

MIN. THD. ENGM'T F 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄8 29 11⁄8 29 11⁄8 29 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 13⁄4 44 13⁄4 44 2 51 25⁄8 67 27⁄8 73 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

CHANNEL SIZE

MAX. C-C

C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C15 x 33.9 C380 x 50 C15 x 33.9 C380 x 50

24 610 24 610 24 610 30 762 30 762 30 762 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 42 1067 42 1067 40 1016 48 1219 48 1219

CHANNEL SPACING W 5⁄ 8

16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 11⁄2 38 21⁄8 54 21⁄8 54 21⁄8 54 23⁄8 60 25⁄8 67 27⁄8 73 31⁄8 79 33⁄8 86

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

P

APPROX. WEIGHT EACH

11⁄2 38 11⁄2 38 11⁄2 38 2 51 2 51 2 51 2 51 2 51 2 51 3 76 3 76 3 76 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102

55 25 57 26 64 29 81 37 99 45 106 48 139 63 135 61 162 73 255 116 287 130 336 152 384 174 432 196 460 209 621 282 821 372 1085 492 1582 718 1870 848 2668 1210 3560 1615 4600 2087

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 37


VARIABLE SPRING SUPPORTS SERIES 980 - TYPE A G

A

0

1 1/2

3

4 1/2

6

7 1/2

9

LD LBS

DEFL IN

FIG. NO.

SIZE

TRAVEL

MARK NUMBER

SERIAL NUMBER

B

E

F

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 38

TYPE

CALIBRATED LOAD

CASE LGTH B 27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

CASE DIA. C 4 102 4 102 4 102 9 5 ⁄16 141 5 9⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 267⁄8 683 291⁄4 743 301⁄4 768 293⁄8 746 317⁄8 810 345⁄8 879 333⁄4 857 373⁄4 959 391⁄2 1003 393⁄4 1010 443⁄4 1137 36 914 391⁄8 994 493⁄8 1254 50 1270 491⁄2 1257 597⁄8 1521 681⁄8 1730 657⁄8 1673 755⁄8 1921 897⁄8 2283 997⁄8 2537 1243⁄8 3159

MIN. THD. ROD APPROX. ENGM'T ENGM'T WGT F G EACH 7⁄ 8 7⁄ 8 32 22 22 15 7⁄ 8 7⁄ 8 34 22 22 15 7⁄ 8 7⁄ 8 38 22 22 17 7⁄ 8 7⁄ 8 52 22 22 24 7⁄ 8 7⁄ 8 62 22 22 28 7⁄ 8 7⁄ 8 68 22 22 31 11⁄8 11 ⁄ 8 90 29 29 41 11⁄8 11 ⁄ 8 88 29 29 40 11⁄8 11 ⁄ 8 106 29 29 48 11⁄4 11 ⁄ 4 170 32 32 77 11⁄4 11 ⁄ 4 187 32 32 85 11⁄4 11 ⁄ 4 219 32 32 99 15⁄8 15 ⁄ 8 253 41 41 115 15⁄8 15 ⁄ 8 287 41 41 130 13⁄4 13 ⁄ 4 303 44 44 137 13⁄4 13 ⁄ 4 420 44 44 191 2 2 550 51 51 249 25⁄8 25 ⁄ 8 733 67 67 332 27⁄8 27 ⁄ 8 1122 73 73 509 31⁄2 31 ⁄ 2 1310 89 89 594 37⁄8 37 ⁄ 8 1872 98 98 849 41⁄4 41⁄4 2052 108 108 931 41⁄4 41 ⁄ 4 2831 108 108 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980 For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980. Note: Please see page 45 to calculate Rod Take-Out.

C

LOADS POUNDS NEWTONS

SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS FIGURE 980 TYPE B A

T R H

A 0

1 1/2

3

4 1/2

6

7 1/2

9

LD LBS

FIG. NO.

DEFL IN

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E

B

A

F C A-A

ROD SIZE SIZE A 1⁄ 2 0 0 M12 1⁄ 2 1 1 M12 1⁄ 2 2 2 M12 1⁄ 2 3 3 M12 1⁄ 2 4 4 M12 1⁄ 2 5 5 M12 5⁄ 8 6 6 M16 5⁄ 8 7 7 M16 5⁄ 8 8 8 M16 3⁄ 4 9 9 M20 3⁄ 4 10 10 M20 3⁄ 4 11 11 M20 12 1 12 M24 13 1 13 M24 14 1 1⁄ 4 14 M30 15 1 1⁄ 4 15 M30 16 1 1⁄ 2 16 M36 17 1 3⁄ 4 17 M42 18 2 18 M48 19 2 1⁄ 4 19 M56 20 2 1⁄ 2 20 M64 21 2 3⁄ 4 21 M72 22 3 22 M80X6

CASE LGTH. B 27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

CASE DIA. C E 4 283⁄8 102 721 4 303⁄4 102 781 4 313⁄4 102 806 59⁄16 307⁄8 141 784 59⁄16 333⁄8 141 848 59⁄16 361⁄8 141 918 65⁄8 351⁄4 168 895 65 ⁄ 8 381⁄4 168 972 65 ⁄ 8 41 168 1041 85 ⁄ 8 411⁄4 219 1048 85 ⁄ 8 461⁄4 219 1175 85 ⁄ 8 371⁄2 219 953 85 ⁄ 8 411⁄8 219 1045 85 ⁄ 8 513⁄8 219 1305 85 ⁄ 8 53 219 1346 85 ⁄ 8 521⁄2 219 1334 85⁄8 627⁄8 219 1597 85 ⁄ 8 711⁄8 219 1807 123⁄4 697⁄8 324 1775 123⁄4 801⁄8 324 2035 123⁄4 943⁄8 324 2397 123⁄4 1043⁄8 324 2651 123⁄4 1293⁄8 324 3286

MIN. HGT. THD. OF ENGM'T PIN F H 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 7⁄ 8 11⁄2 22 38 11⁄8 11⁄2 29 38 11⁄8 11⁄2 29 38 11⁄ 8 11⁄2 29 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 11⁄4 11⁄2 32 38 15⁄8 2 41 51 15⁄8 2 41 51 13⁄ 4 3 44 76 13⁄4 3 44 76 2 3 51 76 25⁄8 3 67 76 27⁄8 4 73 102 31⁄2 41⁄2 89 114 37⁄8 41⁄2 98 114 41⁄4 41⁄2 108 114 41 ⁄ 4 5 108 127

R 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 2 51 2 51 21⁄2 64 21⁄2 64 3 76 3 76 4 102 4 102 4 102

T 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 3⁄ 8 10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT. DIA. EACH 11⁄ 16 32 17 15 11⁄ 16 34 17 15 11⁄ 16 38 17 17 11⁄ 16 52 17 24 11⁄ 16 62 17 28 11⁄ 16 68 17 31 13⁄ 16 90 21 41 13⁄ 16 88 21 40 13⁄ 16 106 21 48 15⁄ 16 170 24 77 15⁄ 16 187 24 85 15⁄ 16 219 24 99 11⁄4 253 32 115 11⁄4 287 32 130 11⁄2 303 38 137 11⁄2 420 38 191 13⁄4 550 44 249 2 733 51 332 23⁄8 1122 60 509 25⁄8 1310 67 594 2 7⁄ 8 1872 73 849 3 1⁄ 8 2052 79 931 33⁄ 8 2831 86 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

LUG HOLE DIAMETER DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 39


VARIABLE SPRING SUPPORTS SERIES 980 - TYPE C S

A T

R H

A 0

1 1/2

3

4 1/2

6

7 1/2

9

DEFL IN

LD LBS

FIG. NO.

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E

B

F

ROD SIZE SIZE A 1⁄ 2 0 0 M12 1⁄ 2 1 1 M12 1⁄ 2 2 2 M12 1⁄ 2 3 3 M12 1⁄ 2 4 4 M12 1⁄ 2 5 5 M12 5⁄ 8 6 6 M16 5⁄ 8 7 7 M16 5⁄ 8 8 8 M16 3⁄ 4 9 9 M20 3⁄ 4 10 10 M20 3⁄ 4 11 11 M20 12 1 12 M24 13 1 13 M24 14 11⁄4 14 M30 15 11⁄4 15 M30 16 11⁄2 16 M36 17 13⁄4 17 M42 18 2 18 M48 19 21⁄4 19 M56 20 21⁄2 20 M64 21 23⁄4 21 M72 22 3 22 M80x6

A

A-A

LUG HOLE DIAMETER

40

MIN. HGT. CASE THD. OF DIA. ENGM'T PIN C E F H 7⁄ 8 4 283⁄8 11⁄2 102 721 22 38 7⁄ 8 4 303⁄4 11⁄2 102 781 22 38 7⁄ 8 4 313⁄4 11⁄2 102 806 22 38 7⁄ 8 59⁄16 307⁄8 11⁄2 141 784 22 38 7⁄ 8 59⁄16 333⁄8 11⁄2 141 848 22 38 7⁄ 8 59⁄16 361⁄8 11⁄2 141 918 22 38 65⁄8 351⁄4 11⁄8 11⁄2 168 895 29 38 65⁄8 381⁄4 11⁄8 11⁄2 168 972 29 38 65⁄8 41 1 1⁄ 8 11⁄2 168 1041 29 38 85⁄8 411⁄4 11⁄4 11⁄2 219 1048 32 38 85⁄8 461⁄4 11⁄4 11⁄2 219 1175 32 38 85⁄8 371⁄2 11⁄4 11⁄2 219 953 32 38 85⁄8 411⁄8 15⁄8 2 219 1045 41 51 85⁄8 513⁄8 15⁄8 2 219 1305 41 51 85⁄8 53 1 3⁄ 4 3 219 1346 44 76 85⁄8 521⁄2 13⁄4 3 219 1334 44 76 85⁄8 627⁄8 2 3 219 1597 51 76 85⁄8 711⁄8 25⁄8 3 219 1807 67 76 123⁄4 697⁄8 27⁄8 4 324 1775 73 102 123⁄4 801⁄8 31⁄2 41⁄2 324 2035 89 114 123⁄4 943⁄8 37⁄8 41⁄2 324 2397 98 114 123⁄4 1043⁄8 41⁄4 41⁄2 324 2651 108 114 123⁄4 1293⁄8 41⁄4 5 324 3286 108 127

R 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 4 32 11 ⁄ 2 38 11 ⁄ 2 38 2 51 2 51 21⁄2 64 21 ⁄ 2 64 3 76 3 76 4 102 4 102 4 102

S 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 2 51 2 51 23⁄8 60 23⁄8 60 27 ⁄ 8 73 31 ⁄ 8 79 33 ⁄ 8 86 35 ⁄ 8 92 37 ⁄ 8 98

T 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 1⁄ 4

6 3⁄ 8

10 3⁄ 8 10 3⁄ 8 10 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25

LUG APPROX. HOLE WGT DIA. EACH 11⁄ 16 32 17 15 11⁄ 16 34 17 15 11⁄ 16 38 17 17 11⁄ 16 52 17 24 11⁄ 16 62 17 28 11⁄ 16 68 17 31 13⁄ 16 90 21 41 13⁄ 16 88 21 40 13⁄ 16 106 21 48 15⁄ 16 170 24 77 15⁄ 16 187 24 85 15⁄ 16 219 24 99 11 ⁄ 4 253 32 115 11 ⁄ 4 287 32 130 11 ⁄ 2 303 38 137 11 ⁄ 2 420 38 191 13 ⁄ 4 550 44 249 2 733 51 332 23 ⁄ 8 1122 60 509 25 ⁄ 8 1310 67 594 27⁄8 1872 73 849 31⁄8 2052 79 931 33⁄8 2831 86 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. Pins for attachment to the structure are not included with the unit and must be ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering specify Figure Number, pin diameter and finish. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910 For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910. Note: Please see page 45 to calculate Rod Take-Out.

C

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

CASE LGTH. B 27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS


VARIABLE SPRING SUPPORTS SERIES 980 TYPE D

A ROD, NUTS, AND WASHER NOT FURNISHED

M

0

1 1/2

3

4 1/2

6

7 1/2

9

LD LBS

FIG. NO.

DEFL IN

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

E B

C

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

CASE LENGTH B 27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

CASE DIA. C 4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65 ⁄ 8 168 65 ⁄ 8 168 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85 ⁄ 8 219 85⁄8 219 85 ⁄ 8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

E 361⁄4 921 385⁄8 981 395⁄8 1006 383⁄4 984 411⁄4 1048 44 1118 431⁄2 1105 471⁄2 1207 491⁄2 1257 491⁄2 1257 543⁄4 1391 46 1168 493⁄4 1264 60 1524 611⁄2 1562 603⁄4 1543 713⁄4 1822 807⁄8 2054 79 2007 89 2261 1041⁄4 2648 1147⁄8 2918 140 3556

HGT. OF APPROX. SPACER WEIGHT M EACH 81⁄2 32 216 15 81⁄2 34 216 15 81⁄2 38 216 17 81⁄2 52 216 24 81⁄2 62 216 28 81 ⁄ 2 68 216 31 81⁄2 90 216 41 81⁄2 88 216 40 81⁄2 106 216 48 83⁄8 170 213 77 85⁄8 187 219 85 85 ⁄ 8 219 219 99 9 253 229 115 9 287 229 130 91⁄4 303 235 137 91⁄8 420 232 191 91⁄2 550 241 249 93⁄4 733 248 332 10 1122 254 509 101⁄4 1310 260 594 101⁄2 1872 267 849 103⁄4 2052 273 931 11 2831 279 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980 For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 41


VARIABLE SPRING SUPPORTS SERIES 980 TYPE E C MUST BE TACK WELDED BY CUSTOMER

R.H. AND L.H. ROD AND NUT NOT FURNISHED, LENGTH TO SUIT CUSTOMER REQUIREMENT

0

1 1/2

3

4 1/2

6

7 1/2

9

LD LBS

FIG. NO.

DEFL IN

SIZE

TYPE

CALIBRATED LOAD

TRAVEL

MARK NUMBER

SERIAL NUMBER

B

F

L.H. THD.

12"

MUST BE TACK WELDED BY CUSTOMER

A

F TURNBUCKLE IS FURNISHED

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 42

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

HANGER SIZE 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄ 4 M30 11⁄ 4 M30 11⁄ 2 M36 13⁄ 4 M42 2 M48 21⁄ 4 M56 21⁄ 2 M64 23⁄ 4 M72 3 M80X6

CASE LENGTH B 27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

CASE MIN. THD. DIAMETER ENGM'T C F 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 4 102 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 7⁄ 8 59⁄16 141 22 65⁄8 11⁄8 168 29 65 ⁄ 8 11⁄8 168 29 65 ⁄ 8 11⁄8 168 29 85 ⁄ 8 11⁄4 219 32 85 ⁄ 8 11⁄4 219 32 85 ⁄ 8 11⁄4 219 32 85 ⁄ 8 15⁄8 219 41 85 ⁄ 8 15⁄8 219 41 85 ⁄ 8 13⁄4 219 44 85 ⁄ 8 13⁄4 219 44 85⁄8 2 219 51 5 8 ⁄8 25⁄8 219 67 123⁄4 27⁄8 324 73 123⁄4 31⁄2 324 89 123⁄4 37⁄8 324 98 123⁄4 41⁄4 324 108 123⁄4 41⁄4 324 108

APPROX. WEIGHT EACH 32 15 34 15 38 17 52 24 62 28 68 31 90 41 88 40 106 48 170 77 187 85 219 99 253 115 287 130 303 137 420 191 550 249 733 332 1122 509 1310 594 1872 849 2052 931 2831 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980 For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980.


VARIABLE SPRING SUPPORTS SERIES 980 - TYPE F CASE CASE BOTTOM LNGTH. DIA. FLANGE SIZE B C BOLT DIA. 0

1 1/2

3

4 1/2

6

7 1/2

9

DEFL IN

LD LBS

FIG. NO.

SIZE

CALIBRATED LOAD

MARK NUMBER

X

TYPE

TRAVEL

SERIAL NUMBER

B

BO

LT

C

IR

C

LE

C

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

251⁄2 648 275⁄8 702 315⁄8 803 28 711 303⁄8 772 331⁄8 841 323⁄4 832 38 965 383⁄4 984 38 965 427⁄8 1089 341⁄8 867 365⁄8 930 467⁄8 1191 473⁄8 1203 473⁄8 1203 561⁄2 1435 643⁄4 1645 615⁄8 1565 705⁄8 1794 835⁄8 2124 927⁄8 2359 1171⁄8 2975

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

5⁄ 8 16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19

BOTTOM FLANGE

x 71⁄2 x 71⁄2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 1⁄ 4 x 71⁄ 2 x 71⁄ 2 6 x 191 x 191 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 3⁄ 8 x 9 x 9 10 x 229 x 229 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 1⁄ 2 x 131⁄ 4 x 131⁄ 4 13 x 337 x 337 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 5⁄ 8 x 171⁄ 4 x 171⁄ 4 16 x 438 x 438 1⁄ 4

BOLT OVERALL LOAD LOAD APPROX. CIRCLE LNGTH. X ** FLANGE FLANGE WGT. MIN. MAX. MIN. MAX. DIA. THICK. EACH

7 178 7 178 7 178 73⁄4 197 73⁄4 197 73⁄4 197 91⁄4 235 91⁄4 235 91⁄4 235 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 109⁄16 268 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400 153⁄4 400

93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 93⁄4 248 101⁄2 267 101⁄2 267 101⁄2 267 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 161⁄4 413 21 533 21 533 21 533 21 533 21 533

27 29 686 737 291⁄8 311⁄8 740 791 33 351⁄8 841 892 291⁄2 311⁄2 749 800 317⁄8 337⁄8 810 860 341⁄2 365⁄8 876 930 34 361⁄4 864 921 397⁄8 417⁄8 1013 1064 40 42 1016 1067 40 42 1016 1067 447⁄8 467⁄8 1140 1191 361⁄8 381⁄8 918 968 385⁄8 405⁄8 981 1032 487⁄8 507⁄8 1241 1292 493⁄8 513⁄8 1254 1305 493⁄8 513⁄8 1254 1305 581⁄2 601⁄2 1486 1537 663⁄4 683⁄4 1695 1746 633⁄4 653⁄4 1619 1670 723⁄4 743⁄4 1848 1899 861⁄4 881⁄4 2191 2242 95 97 2413 2464 1191⁄4 1211⁄4 3029 3080

37 ⁄ 8 98 37⁄8 98 37⁄8 98 53⁄8 137 53⁄8 137 53⁄8 137 63⁄8 162 63⁄8 162 6 3⁄ 8 162 8 3⁄ 8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 83⁄8 213 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318 121⁄2 318

1⁄ 4

6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 4 6 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13 1⁄ 2 13

50 23 50 23 56 25 80 36 90 41 99 45 130 59 129 59 140 64 240 109 260 118 280 127 310 141 330 150 340 154 440 200 560 254 750 340 1120 508 1220 553 1700 771 1810 821 2450 1111

** The Installed Height should be the mid-point between the Maximum and Minimum Overall Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Installed Height, and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980 For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 43


VARIABLE SPRING SUPPORTS A

C-C Rod Dimension F as specified by customer E P W

B

SIZE

TYPE

MARK NUMBER

DEFL IN

FIG. NO.

TRAVEL

SIZE

TYPE

CALIBRATED LOAD

SERIAL NUMBER

MARK NUMBER

LD LBS

LD LBS

TRAVEL

SERIAL NUMBER

DEFL IN 9

FIG. NO.

CALIBRATED LOAD

9

7 1/2

7 1/2

6

6

4 1/2

4 1/2

3

3

1 1/2

Ordering: Specify Figure Number (Travel Series), Type, Size, Total Load, Hot Load per spring, Cold Load per spring, Movement and Direction of Movement (from the Cold/Installed position to the Hot/Operating position), Center to Center of Rods dimension and Hanger Identification Number (if any). Specify any other optional feature(s) as necessary. For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980 Note: Please see page 45 to calculate Rod Take-Out.

For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980.

1 1/2

0

0

C

FIGURE 980 TYPE G HANGER SIZE

0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

ROD SIZE A

CASE LENGTH B

CASE DIAMETER C

E

1⁄ 2

27 686 293⁄8 746 303⁄8 772 291⁄2 749 32 813 343⁄4 883 34 864 377⁄8 962 393⁄4 1010 397⁄8 1013 447⁄8 1140 361⁄8 918 391⁄4 997 491⁄2 1257 501⁄4 1276 493⁄4 1264 60 1524 681⁄2 1740 66 1676 753⁄4 1924 90 2286 100 2540 1241⁄2 3162

4 102 4 102 4 102 59⁄16 141 59⁄16 141 59⁄16 141 65⁄8 168 65⁄8 168 65⁄8 168 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 85⁄8 219 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324 123⁄4 324

13⁄8 35 13⁄8 35 13⁄8 35 17⁄8 48 17⁄8 48 17⁄8 48 17⁄8 48 17⁄8 48 17⁄8 48 27⁄8 73 27⁄8 73 27⁄8 73 37⁄8 98 37⁄8 98 41⁄8 105 41⁄8 105 37⁄8 98 35⁄8 92 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98 37⁄8 98

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 1⁄ 2 M12 5⁄ 8 M16 5⁄ 8 M16 5⁄ 8 M16 3⁄ 4 M20 3⁄ 4 M20 3⁄ 4 M20 1 M24 1 M24 11⁄4 M30 11⁄4 M30 11⁄2 M36 13⁄4 M42 2 M48 21⁄4 M56 21⁄2 M64 23⁄4 M72 3 M80x6

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 44

MIN. THD. ENGM'T F 7⁄ 8

22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 7⁄ 8 22 11⁄8 29 11⁄8 29 11⁄8 29 11⁄4 32 11⁄4 32 11⁄4 32 15⁄8 41 15⁄8 41 13⁄4 44 13⁄4 44 2 51 25⁄8 67 27⁄8 73 31⁄2 89 37⁄8 98 41⁄4 108 41⁄4 108

CHANNEL SIZE

MAX. C-C

C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C3 x 4.1 C75 x 6 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C4 x 5.4 C100 x 8 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C5 x 6.7 C130 x 10 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C8 x 11.5 C200 x 17 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C12 x 20.7 C130 x 31 C15 x 33.9 C380 x 50 C15 x 33.9 C380 x 50

24 610 24 610 24 610 30 762 30 762 30 762 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 36 914 42 1067 42 1067 40 1016 48 1219 48 1219

CHANNEL SPACING W 5⁄ 8

16 5⁄ 8 16 5⁄ 8 16 3⁄ 4 19 3⁄ 4 19 3⁄ 4 19 1 25 1 25 1 25 11⁄4 32 11⁄4 32 11⁄4 32 11⁄2 38 11⁄2 38 11⁄2 38 21⁄8 54 21⁄8 54 21⁄8 54 23⁄8 60 25⁄8 67 27⁄8 73 31⁄8 79 33⁄8 86

P

APPROX. WEIGHT EACH

11⁄2 38 11⁄2 38 11⁄2 38 2 51 2 51 2 51 2 51 2 51 2 51 3 76 3 76 3 76 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102 4 102

64 29 68 31 76 34 104 47 124 56 136 62 180 82 176 80 212 96 340 154 374 170 438 199 506 230 574 260 606 275 840 381 1100 499 1466 665 2244 1018 2620 1188 3744 1698 4104 1862 5662 2568


VARIABLE SPRING SUPPORTS

    VARIABLE SPRING ROD TAKE OUT CALCULATION Type A

Type B

Type C

Type G

For Spring Types A, B, C, and G, the Rod Takeout can be calculated by adding the spring deflection of the load  indicator at the cold load setting (found on pages 5 7) to the "E" dimension and then subtracting 3" indicator at the cold load setting  (found on pages 5‐7) to the "E" dimension and then subtracting 3"   to compensate for one half of the turnbuckle gap used for adjustment. Example: A Figure 920B Size 14, with an Installed Load of 4000 lbs. Has a Rod Take out of (19"+1.5"‐3") = 17.5"

Type D This spring type does not require any adjustment to its' "E" dimension.

Type E Hanger rod length to be determined by the customer.

Note: Please confirm that sufficient thread length is available on the rod for field adjustment for all spring types. 45


TECHNICAL INFORMATION

REFERENCE DATA – METRIC CONVERSION CHART TO CONVERT FROM degree radian (rad)

TO radian (rad) degree

MULTIPLY BY 1.745329 x 10-2 5.729578 x 10+1

Area

foot2 inch2 circular mil square centimeter (cm2) square meter (m2) square meter (m2) square meter (m2)

square meter (m2) square meter (m2) square meter (m2) square inch (in2) foot2 inch2 circular mil

9.290304 x 10-2 6.451600 x 10-4 5,067075 x 10-10 1.550003 x 10-1 1.076391 x 10+1 1.550003 x 10+3 1.973525 x 10+9

Bending Moment of Torque

lbf•ft lbf•in N•m N•m

newton meter (N•m) newton meter (N•m) lbf•ft lbf•in

1.355818 1.129848 x 10-1 7.375621 x 10-1 8.850748

Force

pounds-force (lbf)

newtons (N)

4.448222

Length

foot (ft) inch (in) mil inch (in) meter (m) meter (m) meter (m) micrometer (µm)

meter (m) meter (m) meter (m) micrometer (µm) foot (ft) inch (in) mil Inch (in)

3.048000 x 10-1 2.540000 x 10-2 2.540000 x 10-5 2.540000 X 10+4 3.280840 3.937008 x 10+1 3.937008 x 10+4 3.937008 x 10-5

Mass

ounce (avoirdupois) pound (avoirdupois) on (short, 2000 lb) on (long, 2240 lb) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg)

kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) ounce (avoirdupois) pound (avoirdupois) ton (short 2000 lb) ton (long 2240 lb)

2.834952 x 10-2 4.535924 x 10-1 9.071847 x 10+2 1.016047 x 10+3 3.527396 x 10+1 2.204622 1.102311 x 10-3 9.842064 x 10-4

Mass Per Unit Length

lb/ft lb/in kg/m kg/m

kilogram per meter (kg/m) kilogram per meter (kg/m) lb/ft lb/in

1.488164 1.785797 x 10+1 6.719689 x 10-1 5.599741 x 10-2

Mass Per lb/ft3 Unit Volume lb/in3 kg/m3 kg/m3 lbs/ft3

kilogram per cubic meter (kg/m3) kilogram per cubic meter (kg/m3) lb/ft3 lb/in3 lbs/in3

1.601846 x 10-1 2.767990 x 10+4 6.242797 x 10-2 3 612730 x 10-5 1.728000 x 10+3

Mass Per Area Unit

lb/ft2 kg/m2

kilogram per square meter (kg/m2) 4882428 pound per square foot (lb/ft2) 2.048161 x 10-1

Pressure or Stress

lbf/in2 (psi) kip/in2 (ksi) lbf/in2 (psi) pascal (Pa) pascal (Pa) megapascals (MPa)

pascal (Pa) pascal (Pa) megapascals (MPa) pound force per sq. inch (psi) kip per sq. inch (ksi) lbf/in2 (psi)

6.894757 x 10+3 6-894757 x 10+6 6.894757 x 10-3 1.450377 x 10-4 1.450377 x 10-7 1-450377 x 10+2

Section Properties

section modulus S (in3) section modulus S (M3) moment of inertia I (in4) moment of inertia I (M4) modulus of elasticity E (psi) modulus of elasticity E (Pa)

S (m3) S (in3) 1 (m4) I (in4) E (Pa) E (psi)

1.638706 x 10-5 6.102374 x 10+4 4.162314 x 10-7 2.402510 x 10+6 6.894757 x 10+3 1.450377 x 10-4

Temperature degree Fahrenheit degree Celsius

degree Celsius degree Fahrenheit

t° C = t° F - 32) / 1.8 t° F = 1.8 t° C + 32

Volume

cubic meter (m3) cubic meter (m3) cubic inch (in3) foot3 inch3 cubic meter (m3)

2.831685 x 10-2 1.638706 x 10-2 6.102374 x 10-2 3.531466 x 10+1 6.102376 x 10+4 3.785412 x 10-3

Angle

foot3 inch3 cubic centimeter (cm3) cubic meter (m3) cubic meter (m3) gallon (U.S. liquid)

ABBREVIATIONS AISC

= American Institute of Steel Construction AISI = American Iron & Steel Institute ANSI = American National Standards Institute ASTM = American Society for Testing & Materials AWWA = American Water Works Association Dia. = Diameter Ft. = Feet Ga = Gauge I.D. = Inside Diameter In. = Inch Lbs. = Pounds Max. = Maximum Min. = Minimum MSS = Manufacturers' Standardization Society NFPA = National Fire Protection Association O.D. = Outside Diameter Oz. = Ounces psi = Pounds Per Square Inch PVC = Poly Vinyl Chloride UNC = Unified Course Threads UNCR = Unified Course Threads (Rounded Root) METRIC SYMBOLS cm kg kN m µm mm MPa N Nm Pa

= = = = = = = = = =

centimeter kilogram kilonewton meter micrometer millimeter megapascal newton newton-meter pascal

46


TECHNICAL INFORMATION

PIPE WEIGHTS FOR STANDARD AND HEAVY WEIGHT PIPE Nominal Pipe Size 1 ⁄2" (15mm) 3 ⁄4" (20mm) 1" (25mm) 11⁄4" (32mm) 11⁄2" (40mm) 2" (50mm) 21⁄2" (65mm) 3" (80mm) 31⁄2" (90mm) 4" (100mm) 5" (125mm) 6" (150mm) 8" (200mm) 10" (250mm) 12" (300mm) 14" (350mm) 16" (400mm) 18" (450mm) 20" (500mm) 24" (600mm) 30" (750mm) 36" (900mm) 42" (1050mm)

Pipe Schedule Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 80 Std / 40 XS / 60 Std XS Std / 30 XS Std / 30 XS / 40 Std XS Std / 20 XS / 30 Std / 20 XS Std XS / 20 Std XS / 20 Std XS / 20

PIPE DATA Outside Dia. in mm 0.840 22 1.050

28

1.315

34

1.660

42

1.900

48

2.375

60

2.875

75

3.500

89

4.000

102

4.500

114

5.563

141

6.625

168

8.625

219

10.75

273

12.75

235

14.00

355.6

16.00

406.4

18.00

457.2

20.00

508.0

24.00

609.6

30.00

762.0

36.00

914.4

42.00

1066.8

Pipe Weights are based on Carbon Steel pipe

47

Wall Th’k in 0.109 0.147 0.113 0.154 0.133 0.179 0.140 0.191 0.145 0.200 0.154 0.218 0.203 0.276 0.216 0.300 0.226 0.318 0.237 0.337 0.258 0.375 0.280 0.432 0.322 0.500 0.365 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500 0.375 0.500

PIPE WEIGHT w/ Gas, Air, Steam w/ Water lbs/ft N/m lbs/ft N/m 0.9 12 1.0 14 1.1 16 1.2 17 1.1 17 1.4 20 1.5 22 1.7 24 1.7 25 2.1 30 2.2 32 2.5 36 2.3 33 2.9 43 3.0 44 3.6 52 2.7 40 3.6 53 3.6 53 4.4 64 3.7 53 5.1 75 5.0 73 6.3 92 5.8 85 7.9 115 7.7 112 9.5 139 7.6 111 11 157 10 150 13 191 9.1 133 13 195 13 182 16 239 11 157 16 238 15 219 20 291 15 213 23 340 21 303 29 418 19 277 31 460 29 417 40 582 29 417 50 733 43 633 63 922 40 591 75 1090 55 799 87 1271 50 723 99 1439 65 955 112 1641 55 796 114 1669 72 1052 130 1892 63 913 142 2069 83 1208 159 2326 71 1030 172 2509 93 1364 192 2800 79 1147 205 2988 104 1520 227 3313 95 1381 279 4067 125 1831 306 4460 119 1731 410 5983 158 2299 444 6478 143 2082 566 8256 190 2766 607 8853 167 2433 746 10888 222 3234 794 11587


TECHNICAL INFORMATION

USEFUL WEIGHT FORMULAS PIPE Weight (lb/ft) = 10.68 x T x (D - T) x F

PLATE AND BAR Weight (lb) = 0.2833 x T x W x L x F

PIPE CONTENTS Weight (lb/ft) = 0.3405 x G x (D - 2T)2

ROUND ROD Weight (lb/ft) = 2.67D2

LEGEND D = Outside Diameter (inches) F = Material Weight Factor G = Specific Gravity of Pipe Contents Normally 1.0 for water, 0 for air and steam. L = Length (inches) T = Pipe Wall, Plate, or Bar Thickness (inches) W = Width (inches)

MATERIAL WEIGHT FACTORS Carbon Steel & Cr-Mo ..................1.00 Aluminum ......................................0.35 Brass ...............................................1.12 Cast lron .........................................0.91 Copper ............................................1.14 Ferritic stainless steel .....................0.95 Austenitic stainless steel ................1.02 Wrought iron ..................................0.98

CALCULATING OF PIPING INSULATION WEIGHT The weight per foot of insulation is calculated by using the weight factor “X” from the table below and multiplying by the insulation density (lbs/cu-ft). EXAMPLE: A 16" pipe with 31⁄2" of insulation is found to have a weight factor of 1.49 (from table below). With an insulation density of 11 lb/cu-ft, the calculation for insulation weight is 1.49 x 11 = 16.39

INSULATION WEIGHT FACTOR – X NOMINAL PIPE SIZE 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12 14 16 18 20 24

1" .057 .051 .066 .080 .091 .10 .15 .13 .15 .17

11⁄2" .10 .12 .11 .14 .19 .17 .23 .21 .24 .27 .34 .43 .50 .51 .57 .64 .70 .83

2" .16 .15 .21 .21 .27 .25 .31 .30 .34 .38 .47 .59 .68 .70 .78 .87 .96 1.13

NOMINAL INSULATION THICKNESS 21⁄2" 3" 31⁄2" 4" .23 .31 .40 .22 .30 .39 .29 .38 .48 .29 .37 .47 .59 .36 .46 .58 .70 .34 .44 .56 .68 .41 .54 .66 .78 .39 .51 .63 .77 .45 .58 .71 .88 .51 .64 .83 .97 .66 .80 .97 1.17 .75 .93 1.12 1.32 .88 1.07 1.28 1.52 .90 1.11 1.34 1.57 1.01 1.24 1.49 1.74 1.12 1.37 1.64 1.92 1.23 1.50 1.79 2.09 1.44 1.77 2.10 2.44

41⁄2"

5"

51⁄2"

6"

.83 .81 ... .96 1.04 1.13 1.36 1.54 1.74 1.81 2.01 2.21 2.40 2.80

.97 1.10 1.20 1.34 1.56 1.76 1.99 2.07 2.29 2.51 2.73 3.16

1.75 1.99 2.24 2.34 2.58 2.82 3.06 3.54

2.50 2.62 2.88 3.14 3.40 3.92

General Formula: For pipe sizes not shown in the table above (special O.D. pipe, etc.), use the following formula to determine the insulation weight: Insulation Weight: (lb/ft) = 0.0218 x I x T x (T + D) Where: I = Insulation density (lb/cu-ft) T = Insulation thickness (inches) D= Outside diameter of pipe (inches)

48


TECHNICAL INFORMATION

COMMON STRUCTURAL SHAPES USED FOR PIPE SUPPORTS STRUCTURAL SHAPE

ANGLE

CHANNEL

SQUARE TUBING

I-BEAM

SIZE L 11⁄2 x 11⁄2 x 1⁄4 L 2 x 2 x 1⁄4 L 21⁄2 x 21⁄2 x 1⁄4

WEIGHT PER FOOT 2.3 3.2 4.1

DEPTH IN 11⁄2 2 21⁄2

FLANGE WIDTH IN 11⁄2 2 21⁄2

L 3 x 3 x 1⁄4 L 3 x 3 x 3⁄8 L 3 x 3 x 1⁄2

4.9 7.2 9.4

3 3 3

3 3 3

3

L 31⁄2 x 31⁄2 x 3⁄8 L 4 x 4 x 3⁄8 L 4 x 4 x 1⁄2

8.5 9.8 12.8

31⁄2 4 4

31⁄2 4 4

3

L 5 x 5 x 1⁄2 L 6 x 6 x 1⁄2 L 6 x 6 x 3⁄4

16.2 19.6 28.7

5 6 6

5 6 6

C 3 x 4.1 C 4 x 5.4 C 5 x 6.7

4.1 5.4 6.7

3 4 5

13⁄8 15⁄8 13⁄4

⁄4 ⁄16 5 ⁄16

C 6 x 8.2 C 8 x 11.5 C 10 x 15.3

8.2 11.5 15.3

6 8 10

17⁄8 21⁄4 25⁄8

5

C 12 x 20.7 C 15 x 33.9

20.7 33.9

12 15

3 33⁄8

ST 2 x 2 x 1⁄4 ST 3 x 3 x 1⁄4 ST 4 x 4 x 1⁄4

5.4 8.8 12.2

2 3 4

2 3 4

1

ST 4 x 4 x 3⁄8 ST 4 x 4 x 1⁄2 ST 6 x 6 x 1⁄4

17.3 21.6 19.0

4 4 6

4 4 6

3

⁄8 ⁄2 1 ⁄4

5.35 6.13 10.10

ST 6 x 6 x 3⁄8 ST 6 x 6 x 1⁄2 ST 8 x 8 x 1⁄4

27.5 35.2 25.8

6 6 8

6 6 8

3

⁄8 ⁄2 1 ⁄4

13.90 16.80 18.80

ST 8 x 8 x 3⁄8 ST 8 x 8 x 1⁄2

38.9 48.9

8 8

8 8

3

⁄8 ⁄2

26.40 32.90

S 4 x 7.7 W 4 x 13 W 6 x 12

7.7 13.0 12.0

4 41⁄8 6

25⁄8 4 4

5

⁄16 ⁄8 1 ⁄4

3.04 5.46 7.31

W 6 x 15 W 6 x 20 W 8 x 18

15.0 20.0 18.0

6 61⁄4 81⁄8

6 6 51⁄4

⁄4 ⁄8 5 ⁄16

9.72 13.40 15.20

W 8 x 24 W 8 x 31 W 10 x 22

24.0 31.0 22.0

77⁄8 8 101⁄8

61⁄2 8 53⁄4

3 7

⁄8 ⁄16 3 ⁄8

20.90 27.50 23.20

W 10 x 33 W 12 x 26 W 12 x 40

33.0 26.0 40.0

93⁄4 121⁄4 12

8 61⁄2 8

7

35.00 33.40 51.90

Note: Flange thickness for I-Beam and Channel is the “mean” thickness

49

THICKNESS IN 1 ⁄4 1 ⁄4 1 ⁄4 1

SECTION MODULUS IN3 0.13 0.25 0.38

⁄4 ⁄8 1 ⁄2

0.58 0.83 1.07

3

⁄8 ⁄8 1 ⁄2

1.15 1.52 1.97

1

⁄2 ⁄2 3 ⁄4

3.16 4.61 6.66

1

1.10 1.93 3.00

1

5

⁄16 ⁄8 7 ⁄16

4.38 8.14 13.50

1

21.50 42.00

3

5

⁄2 ⁄8

⁄4 ⁄4 1 ⁄4 1

1

1

1

3

1

3

⁄16 ⁄8 1 ⁄2

3

0.77 2.10 4.11


EXECUTIVE OFFICES MASSACHUSETTS 225 Merrimac Street Woburn, MA 01801 Tel: (781) 935-9550 Fax: (781) 938-0026 e-mail: bpwoburn@bergenpower.com

PENNSYLVANIA 484 Galiffa Drive Donora, PA 15033 Tel: (724) 379-5212 Fax: (724) 379-9363

MANUFACTURING PLANT PENNSYLVANIA 484 Galiffa Drive Donora Industrial Park Donora, PA 15033

Bergen-Power Pipe Supports Variable Spring 09V catalog  

The Variable Support is a spring loaded device used for the support of piping and equipment where normal vertical movement is anticipated. V...

Read more
Read more
Similar to
Popular now
Just for you