Page 1

INSTALLATION INSTRUCTIONS YAMAHA Rhino Engine and Rear Skid Plate To avoid injury or damage to your ATV, read and understand these instructions completely before installation. 1. Parts List: Item 1 2 3 4 5

Part Name Y074024 Y078030-01 Cup Washer Self Tapping Screw Self Tapping Screw

Description Rear Skid Engine Skid ¼” hole ¼-14 x 3/4” 5/16-12 x 1”

Qty 1 1 13 13 5

2. Preparation: a) Remove OE Rear and Engine Skid Plate if so equipped. Retain all mounting hardware. 3. Installation: (2004-2005 Models) a) Install ProArmor Rear and Engine Skid plate reusing all OE bolts and washers in their original mounting locations. (2006-up Models) a) Install ProArmor Rear Skid plate reusing all 7 OE bolts and washers in their original mounting locations. b) Install Pro Armor Engine Skid plate using (11) Item #3 washers and (11) Item # 4 screws. 2 mounting locations are used with the Rear Skid Plate as well. NOTE: 2006 and up models change slightly every year. As such some mounting location may require no hardware, and some may require Item #5 screws for better fitment. BE VERY CAREFUL TO MOVE ANY LINES OR HOSES OUT OF THE WAY BEFORE DRILLING! NOTE: When assembled complete, torque all hardware as follows. Torque @ 6 ft. lbs

4. Maintenance:

Periodically check all fasteners for tightness and re-torque as required.

5. Care and Cleaning:

Clean using a soft cloth with soap and water

Customer service: For further information call Pro Armor at 951-270-0559

Y078030

Y078030_RhinoEngine&RearArmor_Instructions  

2. Preparation: a) Remove OE Rear and Engine Skid Plate if so equipped. Retain all mounting hardware. NOTE: When assembled complete, torque...

Advertisement